Subversion Repositories or1k

Using the initial RAM disk (initrd)

===================================

Written 1996,2000 by Werner Almesberger  and

                     Hans Lermen 

initrd provides the capability to load a RAM disk by the boot loader.

This RAM disk can then be mounted as the root file system and programs

can be run from it. Afterwards, a new root file system can be mounted

from a different device. The previous root (from initrd) is then moved

to a directory and can be subsequently unmounted.

initrd is mainly designed to allow system startup to occur in two phases,

where the kernel comes up with a minimum set of compiled-in drivers, and

where additional modules are loaded from initrd.

This document gives a brief overview of the use of initrd. A more detailed

discussion of the boot process can be found in [1].

Operation

---------

When using initrd, the system typically boots as follows:

  1) the boot loader loads the kernel and the initial RAM disk

  2) the kernel converts initrd into a "normal" RAM disk and

     frees the memory used by initrd

  3) initrd is mounted read-write as root

  4) /linuxrc is executed (this can be any valid executable, including

     shell scripts; it is run with uid 0 and can do basically everything

     init can do)

  5) linuxrc mounts the "real" root file system

  6) linuxrc places the root file system at the root directory using the

     pivot_root system call

  7) the usual boot sequence (e.g. invocation of /sbin/init) is performed

     on the root file system

  8) the initrd file system is removed

Note that changing the root directory does not involve unmounting it.

It is therefore possible to leave processes running on initrd during that

procedure. Also note that file systems mounted under initrd continue to

be accessible.

Boot command-line options

-------------------------

initrd adds the following new options:

  initrd=    (e.g. LOADLIN)

    Loads the specified file as the initial RAM disk. When using LILO, you

    have to specify the RAM disk image file in /etc/lilo.conf, using the

    INITRD configuration variable.

  noinitrd

    initrd data is preserved but it is not converted to a RAM disk and

    the "normal" root file system is mounted. initrd data can be read

    from /dev/initrd. Note that the data in initrd can have any structure

    in this case and doesn't necessarily have to be a file system image.

    This option is used mainly for debugging.

    Note: /dev/initrd is read-only and it can only be used once. As soon

    as the last process has closed it, all data is freed and /dev/initrd

    can't be opened anymore.

  root=/dev/ram0   (without devfs)

  root=/dev/rd/0   (with devfs)

    initrd is mounted as root, and the normal boot procedure is followed,

    with the RAM disk still mounted as root.

Installation

------------

First, a directory for the initrd file system has to be created on the

"normal" root file system, e.g.

# mkdir /initrd

The name is not relevant. More details can be found on the pivot_root(2)

man page.

If the root file system is created during the boot procedure (i.e. if

you're building an install floppy), the root file system creation

procedure should create the /initrd directory.

If initrd will not be mounted in some cases, its content is still

accessible if the following device has been created (note that this

does not work if using devfs):

# mknod /dev/initrd b 1 250

# chmod 400 /dev/initrd

Second, the kernel has to be compiled with RAM disk support and with

support for the initial RAM disk enabled. Also, at least all components

needed to execute programs from initrd (e.g. executable format and file

system) must be compiled into the kernel.

Third, you have to create the RAM disk image. This is done by creating a

file system on a block device, copying files to it as needed, and then

copying the content of the block device to the initrd file. With recent

kernels, at least three types of devices are suitable for that:

 - a floppy disk (works everywhere but it's painfully slow)

 - a RAM disk (fast, but allocates physical memory)

 - a loopback device (the most elegant solution)

We'll describe the loopback device method:

 1) make sure loopback block devices are configured into the kernel

 2) create an empty file system of the appropriate size, e.g.

    # dd if=/dev/zero of=initrd bs=300k count=1

    # mke2fs -F -m0 -b 1024 initrd

    (if space is critical, you may want to use the Minix FS instead of Ext2)

    (Note that due to a problem elsewhere in the kernel, you _must_ use a

     1024-byte blocksize when creating your file system.  If any other

     value is used, the kernel will be unable to mount the initrd at boot

     time, causing a kernel panic.)

 3) mount the file system, e.g.

    # mount -t ext2 -o loop initrd /mnt

 4) create the console device (not necessary if using devfs, but it can't

    hurt to do it anyway):

    # mkdir /mnt/dev

    # mknod /mnt/dev/console c 5 1

 5) copy all the files that are needed to properly use the initrd

    environment. Don't forget the most important file, /linuxrc

    Note that /linuxrc's permissions must include "x" (execute).

 6) correct operation the initrd environment can frequently be tested

    even without rebooting with the command

    # chroot /mnt /linuxrc

    This is of course limited to initrds that do not interfere with the

    general system state (e.g. by reconfiguring network interfaces,

    overwriting mounted devices, trying to start already running demons,

    etc. Note however that it is usually possible to use pivot_root in

    such a chroot'ed initrd environment.)

 7) unmount the file system

    # umount /mnt

 8) the initrd is now in the file "initrd". Optionally, it can now be

    compressed

    # gzip -9 initrd

For experimenting with initrd, you may want to take a rescue floppy and

only add a symbolic link from /linuxrc to /bin/sh. Alternatively, you

can try the experimental newlib environment [2] to create a small

initrd.

Finally, you have to boot the kernel and load initrd. Almost all Linux

boot loaders support initrd. Since the boot process is still compatible

with an older mechanism, the following boot command line parameters

have to be given:

  root=/dev/ram0 init=/linuxrc rw

if not using devfs, or

  root=/dev/rd/0 init=/linuxrc rw

if using devfs. (rw is only necessary if writing to the initrd file

system.)

With LOADLIN, you simply execute

     LOADLIN  initrd=

e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0

       init=/linuxrc rw

With LILO, you add the option INITRD= to either the global section

or to the section of the respective kernel in /etc/lilo.conf, and pass

the options using APPEND, e.g.

  image = /bzImage

    initrd = /boot/initrd.gz

    append = "root=/dev/ram0 init=/linuxrc rw"

and run /sbin/lilo

For other boot loaders, please refer to the respective documentation.

Now you can boot and enjoy using initrd.

Changing the root device

------------------------

When finished with its duties, linuxrc typically changes the root device

and proceeds with starting the Linux system on the "real" root device.

The procedure involves the following steps:

 - mounting the new root file system

 - turning it into the root file system

 - removing all accesses to the old (initrd) root file system

 - unmounting the initrd file system and de-allocating the RAM disk

Mounting the new root file system is easy: it just needs to be mounted on

a directory under the current root. Example:

# mkdir /new-root

# mount -o ro /dev/hda1 /new-root

The root change is accomplished with the pivot_root system call, which

is also available via the pivot_root utility (see pivot_root(8) man

page; pivot_root is distributed with util-linux version 2.10h or higher

[3]). pivot_root moves the current root to a directory under the new

root, and puts the new root at its place. The directory for the old root

must exist before calling pivot_root. Example:

# cd /new-root

# mkdir initrd

# pivot_root . initrd

Now, the linuxrc process may still access the old root via its

executable, shared libraries, standard input/output/error, and its

current root directory. All these references are dropped by the

following command:

# exec chroot . what-follows dev/console 2>&1

Where what-follows is a program under the new root, e.g. /sbin/init

If the new root file system will be used with devfs and has no valid

/dev directory, devfs must be mounted before invoking chroot in order to

provide /dev/console.

Note: implementation details of pivot_root may change with time. In order

to ensure compatibility, the following points should be observed:

 - before calling pivot_root, the current directory of the invoking

   process should point to the new root directory

 - use . as the first argument, and the _relative_ path of the directory

   for the old root as the second argument

 - a chroot program must be available under the old and the new root

 - chroot to the new root afterwards

 - use relative paths for dev/console in the exec command

Now, the initrd can be unmounted and the memory allocated by the RAM

disk can be freed:

# umount /initrd

# blockdev --flushbufs /dev/ram0    # /dev/rd/0 if using devfs

It is also possible to use initrd with an NFS-mounted root, see the

pivot_root(8) man page for details.

Note: if linuxrc or any program exec'ed from it terminates for some

reason, the old change_root mechanism is invoked (see section "Obsolete

root change mechanism").

Usage scenarios

---------------

The main motivation for implementing initrd was to allow for modular

kernel configuration at system installation. The procedure would work

as follows:

  1) system boots from floppy or other media with a minimal kernel

     (e.g. support for RAM disks, initrd, a.out, and the Ext2 FS) and

     loads initrd

  2) /linuxrc determines what is needed to (1) mount the "real" root FS

     (i.e. device type, device drivers, file system) and (2) the

     distribution media (e.g. CD-ROM, network, tape, ...). This can be

     done by asking the user, by auto-probing, or by using a hybrid

     approach.

  3) /linuxrc loads the necessary kernel modules

  4) /linuxrc creates and populates the root file system (this doesn't

     have to be a very usable system yet)

  5) /linuxrc invokes pivot_root to change the root file system and

     execs - via chroot - a program that continues the installation

  6) the boot loader is installed

  7) the boot loader is configured to load an initrd with the set of

     modules that was used to bring up the system (e.g. /initrd can be

     modified, then unmounted, and finally, the image is written from

     /dev/ram0 or /dev/rd/0 to a file)

  8) now the system is bootable and additional installation tasks can be

     performed

The key role of initrd here is to re-use the configuration data during

normal system operation without requiring the use of a bloated "generic"

kernel or re-compiling or re-linking the kernel.

A second scenario is for installations where Linux runs on systems with

different hardware configurations in a single administrative domain. In

such cases, it is desirable to generate only a small set of kernels

(ideally only one) and to keep the system-specific part of configuration

information as small as possible. In this case, a common initrd could be

generated with all the necessary modules. Then, only /linuxrc or a file

read by it would have to be different.

A third scenario are more convenient recovery disks, because information

like the location of the root FS partition doesn't have to be provided at

boot time, but the system loaded from initrd can invoke a user-friendly

dialog and it can also perform some sanity checks (or even some form of

auto-detection).

Last not least, CD-ROM distributors may use it for better installation

from CD, e.g. by using a boot floppy and bootstrapping a bigger RAM disk

via initrd from CD; or by booting via a loader like LOADLIN or directly

from the CD-ROM, and loading the RAM disk from CD without need of

floppies.

Obsolete root change mechanism

------------------------------

The following mechanism was used before the introduction of pivot_root.

Current kernels still support it, but you should _not_ rely on its

continued availability.

It works by mounting the "real" root device (i.e. the one set with rdev

in the kernel image or with root=... at the boot command line) as the

root file system when linuxrc exits. The initrd file system is then

unmounted, or, if it is still busy, moved to a directory /initrd, if

such a directory exists on the new root file system.

In order to use this mechanism, you do not have to specify the boot

command options root, init, or rw. (If specified, they will affect

the real root file system, not the initrd environment.)

If /proc is mounted, the "real" root device can be changed from within

linuxrc by writing the number of the new root FS device to the special

file /proc/sys/kernel/real-root-dev, e.g.

  # echo 0x301 >/proc/sys/kernel/real-root-dev

Note that the mechanism is incompatible with NFS and similar file

systems.

This old, deprecated mechanism is commonly called "change_root", while

the new, supported mechanism is called "pivot_root".

Resources

---------

[1] Almesberger, Werner; "Booting Linux: The History and the Future"

    ftp://icaftp.epfl.ch/pub/people/almesber/booting/bootinglinux-current.ps.gz

[2] newlib package (experimental), with initrd example

    ftp://icaftp.epfl.ch/pub/people/almesber/misc/newlib-linux/

[3] Brouwer, Andries; "util-linux: Miscellaneous utilities for Linux"

    ftp://ftp.win.tue.nl/pub/linux-local/utils/util-linux/