| 1 |
1275 |
phoenix |
$Id: README.eicon,v 1.1.1.1 2004-04-15 02:32:24 phoenix Exp $
|
| 2 |
|
|
|
| 3 |
|
|
(c) 1999,2000 Armin Schindler (mac@melware.de)
|
| 4 |
|
|
(c) 1999,2000 Cytronics & Melware (info@melware.de)
|
| 5 |
|
|
|
| 6 |
|
|
This document describes the eicon driver for the
|
| 7 |
|
|
Eicon active ISDN cards.
|
| 8 |
|
|
|
| 9 |
|
|
It is meant to be used with isdn4linux, an ISDN link-level module for Linux.
|
| 10 |
|
|
|
| 11 |
|
|
This program is free software; you can redistribute it and/or modify
|
| 12 |
|
|
it under the terms of the GNU General Public License as published by
|
| 13 |
|
|
the Free Software Foundation; either version 2 of the License, or
|
| 14 |
|
|
(at your option) any later version.
|
| 15 |
|
|
|
| 16 |
|
|
This program is distributed in the hope that it will be useful,
|
| 17 |
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 18 |
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
| 19 |
|
|
GNU General Public License for more details.
|
| 20 |
|
|
|
| 21 |
|
|
You should have received a copy of the GNU General Public License
|
| 22 |
|
|
along with this program; if not, write to the Free Software
|
| 23 |
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
| 24 |
|
|
|
| 25 |
|
|
|
| 26 |
|
|
|
| 27 |
|
|
Supported Cards
|
| 28 |
|
|
===============
|
| 29 |
|
|
|
| 30 |
|
|
Old ISA type
|
| 31 |
|
|
------------
|
| 32 |
|
|
- S-Card ISA
|
| 33 |
|
|
- SX-Card ISA
|
| 34 |
|
|
- SXn-Card ISA
|
| 35 |
|
|
- SCOM-Card ISA
|
| 36 |
|
|
- Quadro-Card ISA
|
| 37 |
|
|
- S2M-Card ISA
|
| 38 |
|
|
|
| 39 |
|
|
DIVA Server family
|
| 40 |
|
|
------------------
|
| 41 |
|
|
- DIVA Server BRI/PCI 2M
|
| 42 |
|
|
- DIVA Server PRI/PCI 2M (9M 23M 30M)
|
| 43 |
|
|
- DIVA Server 4BRI/PCI
|
| 44 |
|
|
supported functions of onboard DSPs:
|
| 45 |
|
|
- analog modem
|
| 46 |
|
|
- fax group 2/3 (Fax Class 2 commands)
|
| 47 |
|
|
- DTMF detection
|
| 48 |
|
|
|
| 49 |
|
|
|
| 50 |
|
|
ISDN D-Channel Protocols
|
| 51 |
|
|
------------------------
|
| 52 |
|
|
|
| 53 |
|
|
- ETSI (Euro-DSS1)
|
| 54 |
|
|
- 1TR6 (German ISDN) *not testet*
|
| 55 |
|
|
- other protocols exist for the range of DIVA Server cards,
|
| 56 |
|
|
but they are not fully testet yet.
|
| 57 |
|
|
|
| 58 |
|
|
|
| 59 |
|
|
You can load the module simply by using the insmod or modprobe function :
|
| 60 |
|
|
|
| 61 |
|
|
insmod eicon [id=driverid] [membase=] [irq=]
|
| 62 |
|
|
|
| 63 |
|
|
|
| 64 |
|
|
The module will automatically probe the PCI-cards. If the id-option
|
| 65 |
|
|
is omitted, the driver will assume 'eicon0' for the first pci card and
|
| 66 |
|
|
increases the digit with each further card. With a given driver-id
|
| 67 |
|
|
the module appends a number starting with '0'.
|
| 68 |
|
|
|
| 69 |
|
|
For ISA-cards you have to specify membase, irq and id. If id or
|
| 70 |
|
|
membase is missing/invalid, the driver will not be loaded except
|
| 71 |
|
|
PCI-cards were found. Additional ISA-cards and irq/membase changes
|
| 72 |
|
|
can be done with the eiconctrl utility.
|
| 73 |
|
|
|
| 74 |
|
|
After loading the module, you have to download the protocol and
|
| 75 |
|
|
dsp-code by using the eiconctrl utility of isdn4k-utils.
|
| 76 |
|
|
|
| 77 |
|
|
|
| 78 |
|
|
Example for loading and starting a BRI card with E-DSS1 Protocol.
|
| 79 |
|
|
|
| 80 |
|
|
eiconctrl [-d DriverId] load etsi
|
| 81 |
|
|
|
| 82 |
|
|
Example for a BRI card with E-DSS1 Protocol with PtP configuration.
|
| 83 |
|
|
|
| 84 |
|
|
eiconctrl [-d DriverId] load etsi -n -t1 -s1
|
| 85 |
|
|
|
| 86 |
|
|
|
| 87 |
|
|
Example for loading and starting a PRI card with E-DSS1 Protocol.
|
| 88 |
|
|
|
| 89 |
|
|
eiconctrl [-d DriverId] load etsi -s2 -n
|
| 90 |
|
|
|
| 91 |
|
|
|
| 92 |
|
|
Details about using the eiconctrl utility are in 'man eiconctrl'
|
| 93 |
|
|
or will be printed by starting eiconctrl without any parameters.
|
| 94 |
|
|
|
| 95 |
|
|
ISDNLOG:
|
| 96 |
|
|
With eicon driver version 1.77 or newer and the eiconctrl utility
|
| 97 |
|
|
of version 1.1 or better, you can use the isdnlog user program
|
| 98 |
|
|
with your DIVA Server BRI card.
|
| 99 |
|
|
Just use "eiconctrl isdnlog on" and the driver will generate
|
| 100 |
|
|
the necessary D-Channel traces for isdnlog.
|
| 101 |
|
|
|
| 102 |
|
|
|
| 103 |
|
|
|
| 104 |
|
|
Thanks to
|
| 105 |
|
|
Deutsche Mailbox Saar-Lor-Lux GmbH
|
| 106 |
|
|
for sponsoring and testing fax
|
| 107 |
|
|
capabilities with Diva Server cards.
|
| 108 |
|
|
|
| 109 |
|
|
|
| 110 |
|
|
Any reports about bugs, errors and even wishes are welcome.
|
| 111 |
|
|
|
| 112 |
|
|
|
| 113 |
|
|
Have fun !
|
| 114 |
|
|
|
| 115 |
|
|
Armin Schindler
|
| 116 |
|
|
mac@melware.de
|
| 117 |
|
|
http://www.melware.de
|
| 118 |
|
|
|
