Subversion Repositories or1k

/*

 * Setup pointers to hardware dependent routines.

 *

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file "COPYING" in the main directory of this archive

 * for more details.

 *

 * Copyright (C) 1996, 1997 by Ralf Baechle

 * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)

 *

 */

#include <linux/config.h>

#include <linux/interrupt.h>

#include <linux/pci.h>

#include <linux/mc146818rtc.h>

#include <linux/init.h>

#include <linux/ide.h>

#include <asm/bootinfo.h>

#include <asm/time.h>

#include <asm/io.h>

#include <asm/irq.h>

#include <asm/processor.h>

#include <asm/reboot.h>

#include <asm/gt64120/gt64120.h>

#include <asm/cobalt/cobalt.h>

extern void cobalt_machine_restart(char *command);

extern void cobalt_machine_halt(void);

extern void cobalt_machine_power_off(void);

extern struct rtc_ops std_rtc_ops;

extern struct ide_ops std_ide_ops;

char arcs_cmdline[CL_SIZE] = {

 "console=ttyS0,115200 "

#ifdef CONFIG_IP_PNP

 "ip=on "

#endif

#ifdef CONFIG_ROOT_NFS

 "root=/dev/nfs "

#else

 "root=/dev/hda1 "

#endif

 };

const char *get_system_type(void)

{

        return "MIPS Cobalt";

}

static void __init cobalt_time_init(void)

{

        rtc_ops = &std_rtc_ops;

}

static void __init cobalt_timer_setup(struct irqaction *irq)

{

        /* Load timer value for 150 Hz */

        GALILEO_OUTL(500000, GT_TC0_OFS);

        /* Register our timer interrupt */

        setup_irq(COBALT_TIMER_IRQ, irq);

        /* Enable timer ints */

        GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);

        /* Unmask timer int */

        GALILEO_OUTL(0x100, GT_INTRMASK_OFS);

}

void __init cobalt_setup(void)

{

        _machine_restart = cobalt_machine_restart;

        _machine_halt = cobalt_machine_halt;

        _machine_power_off = cobalt_machine_power_off;

        board_time_init = cobalt_time_init;

        board_timer_setup = cobalt_timer_setup;

#ifdef CONFIG_BLK_DEV_IDE

        ide_ops = &std_ide_ops;

#endif

        set_io_port_base(KSEG1ADDR(0x10000000));

        /*

         * This is a prom style console. We just poke at the

         *  UART to make it talk.

         * Only use this console if you really screw up and can't

         *  get to the stage of setting up a real serial console.

         */

        /*ns16550_setup_console();*/

}

/* Prom init. We read our one and only communication with the

    firmware. Grab the amount of installed memory */

void __init prom_init(int argc)

{

        mips_machgroup = MACH_GROUP_COBALT;

        add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);

}

void __init prom_free_prom_memory(void)

{

        /* Nothing to do! */

}