URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [acpi/] [thermal.c] - Blame information for rev 1765

Details | Compare with Previous | View Log

/*
 *  acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 1.1.1.1 $)
 *
 *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
 *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
 *
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or (at
 *  your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful, but
 *  WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *  General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
 *
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 *  This driver fully implements the ACPI thermal policy as described in the
 *  ACPI 2.0 Specification.
 *
 *  TBD: 1. Implement passive cooling hysteresis.
 *       2. Enhance passive cooling (CPU) states/limit interface to support
 *          concepts of 'multiple limiters', upper/lower limits, etc.
 *
 */
 
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/compatmac.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/kmod.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
 
 
#define _COMPONENT              ACPI_THERMAL_COMPONENT
ACPI_MODULE_NAME                ("acpi_thermal")
 
MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME);
MODULE_LICENSE("GPL");
 
static int tzp;
MODULE_PARM(tzp, "i");
MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n");
 
#define PREFIX                  "ACPI: "
 
 
#define ACPI_THERMAL_MAX_ACTIVE 10
 
#define KELVIN_TO_CELSIUS(t)    (long)(((long)t-2732>=0) ? ((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t)    ((t+273)*10)
 
static int acpi_thermal_add (struct acpi_device *device);
static int acpi_thermal_remove (struct acpi_device *device, int type);
 
static struct acpi_driver acpi_thermal_driver = {
        .name =         ACPI_THERMAL_DRIVER_NAME,
        .class =        ACPI_THERMAL_CLASS,
        .ids =          ACPI_THERMAL_HID,
        .ops =          {
                                .add =          acpi_thermal_add,
                                .remove =       acpi_thermal_remove,
                        },
};
 
struct acpi_thermal_state {
        u8                      critical:1;
        u8                      hot:1;
        u8                      passive:1;
        u8                      active:1;
        u8                      reserved:4;
        int                     active_index;
};
 
struct acpi_thermal_state_flags {
        u8                      valid:1;
        u8                      enabled:1;
        u8                      reserved:6;
};
 
struct acpi_thermal_critical {
        struct acpi_thermal_state_flags flags;
        unsigned long           temperature;
};
 
struct acpi_thermal_hot {
        struct acpi_thermal_state_flags flags;
        unsigned long           temperature;
};
 
struct acpi_thermal_passive {
        struct acpi_thermal_state_flags flags;
        unsigned long           temperature;
        unsigned long           tc1;
        unsigned long           tc2;
        unsigned long           tsp;
        struct acpi_handle_list devices;
};
 
struct acpi_thermal_active {
        struct acpi_thermal_state_flags flags;
        unsigned long           temperature;
        struct acpi_handle_list devices;
};
 
struct acpi_thermal_trips {
        struct acpi_thermal_critical critical;
        struct acpi_thermal_hot hot;
        struct acpi_thermal_passive passive;
        struct acpi_thermal_active active[ACPI_THERMAL_MAX_ACTIVE];
};
 
struct acpi_thermal_flags {
        u8                      cooling_mode:1;         /* _SCP */
        u8                      devices:1;              /* _TZD */
        u8                      reserved:6;
};
 
struct acpi_thermal {
        acpi_handle             handle;
        acpi_bus_id             name;
        unsigned long           temperature;
        unsigned long           last_temperature;
        unsigned long           polling_frequency;
        u8                      cooling_mode;
        struct acpi_thermal_flags flags;
        struct acpi_thermal_state state;
        struct acpi_thermal_trips trips;
        struct acpi_handle_list devices;
        struct timer_list       timer;
};
 
 
/* --------------------------------------------------------------------------
                             Thermal Zone Management
   -------------------------------------------------------------------------- */
 
static int
acpi_thermal_get_temperature (
        struct acpi_thermal *tz)
{
        acpi_status             status = AE_OK;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_get_temperature");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        tz->last_temperature = tz->temperature;
 
        status = acpi_evaluate_integer(tz->handle, "_TMP", NULL, &tz->temperature);
        if (ACPI_FAILURE(status))
                return -ENODEV;
 
        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Temperature is %lu dK\n", tz->temperature));
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_get_polling_frequency (
        struct acpi_thermal     *tz)
{
        acpi_status             status = AE_OK;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_get_polling_frequency");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        status = acpi_evaluate_integer(tz->handle, "_TZP", NULL, &tz->polling_frequency);
        if (ACPI_FAILURE(status))
                return_VALUE(-ENODEV);
 
        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency is %lu dS\n", tz->polling_frequency));
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_set_polling (
        struct acpi_thermal     *tz,
        int                     seconds)
{
        ACPI_FUNCTION_TRACE("acpi_thermal_set_polling");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        tz->polling_frequency = seconds * 10;   /* Convert value to deci-seconds */
 
        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Polling frequency set to %lu seconds\n", tz->polling_frequency));
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_set_cooling_mode (
        struct acpi_thermal     *tz,
        int                     mode)
{
        acpi_status             status = AE_OK;
        union acpi_object       arg0 = {ACPI_TYPE_INTEGER};
        struct acpi_object_list arg_list = {1, &arg0};
        acpi_handle             handle = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_set_cooling_mode");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        status = acpi_get_handle(tz->handle, "_SCP", &handle);
        if (ACPI_FAILURE(status)) {
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_SCP not present\n"));
                return_VALUE(-ENODEV);
        }
 
        arg0.integer.value = mode;
 
        status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
        if (ACPI_FAILURE(status))
                return_VALUE(-ENODEV);
 
        tz->cooling_mode = mode;
 
        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling mode [%s]\n",
                mode?"passive":"active"));
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_get_trip_points (
        struct acpi_thermal *tz)
{
        acpi_status             status = AE_OK;
        int                     i = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_get_trip_points");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        /* Critical Shutdown (required) */
 
        status = acpi_evaluate_integer(tz->handle, "_CRT", NULL,
                &tz->trips.critical.temperature);
        if (ACPI_FAILURE(status)) {
                tz->trips.critical.flags.valid = 0;
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "No critical threshold\n"));
                return -ENODEV;
        }
        else {
                tz->trips.critical.flags.valid = 1;
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found critical threshold [%lu]\n", tz->trips.critical.temperature));
        }
 
        /* Critical Sleep (optional) */
 
        status = acpi_evaluate_integer(tz->handle, "_HOT", NULL, &tz->trips.hot.temperature);
        if (ACPI_FAILURE(status)) {
                tz->trips.hot.flags.valid = 0;
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No hot threshold\n"));
        }
        else {
                tz->trips.hot.flags.valid = 1;
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found hot threshold [%lu]\n", tz->trips.hot.temperature));
        }
 
        /* Passive: Processors (optional) */
 
        status = acpi_evaluate_integer(tz->handle, "_PSV", NULL, &tz->trips.passive.temperature);
        if (ACPI_FAILURE(status)) {
                tz->trips.passive.flags.valid = 0;
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n"));
        }
        else {
                tz->trips.passive.flags.valid = 1;
 
                status = acpi_evaluate_integer(tz->handle, "_TC1", NULL, &tz->trips.passive.tc1);
                if (ACPI_FAILURE(status))
                        tz->trips.passive.flags.valid = 0;
 
                status = acpi_evaluate_integer(tz->handle, "_TC2", NULL, &tz->trips.passive.tc2);
                if (ACPI_FAILURE(status))
                        tz->trips.passive.flags.valid = 0;
 
                status = acpi_evaluate_integer(tz->handle, "_TSP", NULL, &tz->trips.passive.tsp);
                if (ACPI_FAILURE(status))
                        tz->trips.passive.flags.valid = 0;
 
                status = acpi_evaluate_reference(tz->handle, "_PSL", NULL, &tz->trips.passive.devices);
                if (ACPI_FAILURE(status))
                        tz->trips.passive.flags.valid = 0;
 
                if (!tz->trips.passive.flags.valid)
                        ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid passive threshold\n"));
                else
                        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found passive threshold [%lu]\n", tz->trips.passive.temperature));
        }
 
        /* Active: Fans, etc. (optional) */
 
        for (i=0; i<ACPI_THERMAL_MAX_ACTIVE; i++) {
 
                char name[5] = {'_','A','C',('0'+i),'\0'};
 
                status = acpi_evaluate_integer(tz->handle, name, NULL, &tz->trips.active[i].temperature);
                if (ACPI_FAILURE(status))
                        break;
 
                name[2] = 'L';
                status = acpi_evaluate_reference(tz->handle, name, NULL, &tz->trips.active[i].devices);
                if (ACPI_SUCCESS(status)) {
                        tz->trips.active[i].flags.valid = 1;
                        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found active threshold [%d]:[%lu]\n", i, tz->trips.active[i].temperature));
                }
                else
                        ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid active threshold [%d]\n", i));
        }
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_get_devices (
        struct acpi_thermal     *tz)
{
        acpi_status             status = AE_OK;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_get_devices");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        status = acpi_evaluate_reference(tz->handle, "_TZD", NULL, &tz->devices);
        if (ACPI_FAILURE(status))
                return_VALUE(-ENODEV);
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_call_usermode (
        char                    *path)
{
        char                    *argv[2] = {NULL, NULL};
        char                    *envp[3] = {NULL, NULL, NULL};
 
        ACPI_FUNCTION_TRACE("acpi_thermal_call_usermode");
 
        if (!path)
                return_VALUE(-EINVAL);
 
        argv[0] = path;
 
        /* minimal command environment */
        envp[0] = "HOME=/";
        envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
 
        call_usermodehelper(argv[0], argv, envp);
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_critical (
        struct acpi_thermal     *tz)
{
        int                     result = 0;
        struct acpi_device      *device = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_critical");
 
        if (!tz || !tz->trips.critical.flags.valid)
                return_VALUE(-EINVAL);
 
        if (tz->temperature >= tz->trips.critical.temperature) {
                ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Critical trip point\n"));
                tz->trips.critical.flags.enabled = 1;
        }
        else if (tz->trips.critical.flags.enabled)
                tz->trips.critical.flags.enabled = 0;
 
        result = acpi_bus_get_device(tz->handle, &device);
        if (result)
                return_VALUE(result);
 
        printk(KERN_EMERG "Critical temperature reached (%ld C), shutting down.\n", KELVIN_TO_CELSIUS(tz->temperature));
        acpi_bus_generate_event(device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled);
 
        acpi_thermal_call_usermode(ACPI_THERMAL_PATH_POWEROFF);
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_hot (
        struct acpi_thermal     *tz)
{
        int                     result = 0;
        struct acpi_device      *device = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_hot");
 
        if (!tz || !tz->trips.hot.flags.valid)
                return_VALUE(-EINVAL);
 
        if (tz->temperature >= tz->trips.hot.temperature) {
                ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Hot trip point\n"));
                tz->trips.hot.flags.enabled = 1;
        }
        else if (tz->trips.hot.flags.enabled)
                tz->trips.hot.flags.enabled = 0;
 
        result = acpi_bus_get_device(tz->handle, &device);
        if (result)
                return_VALUE(result);
 
        acpi_bus_generate_event(device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled);
 
        /* TBD: Call user-mode "sleep(S4)" function */
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_passive (
        struct acpi_thermal     *tz)
{
        int                     result = 0;
        struct acpi_thermal_passive *passive = NULL;
        int                     trend = 0;
        int                     i = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_passive");
 
        if (!tz || !tz->trips.passive.flags.valid)
                return_VALUE(-EINVAL);
 
        passive = &(tz->trips.passive);
 
        /*
         * Above Trip?
         * -----------
         * Calculate the thermal trend (using the passive cooling equation)
         * and modify the performance limit for all passive cooling devices
         * accordingly.  Note that we assume symmetry.
         */
        if (tz->temperature >= passive->temperature) {
                trend = (passive->tc1 * (tz->temperature - tz->last_temperature)) + (passive->tc2 * (tz->temperature - passive->temperature));
                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                        "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
                        trend, passive->tc1, tz->temperature,
                        tz->last_temperature, passive->tc2,
                        tz->temperature, passive->temperature));
                tz->trips.passive.flags.enabled = 1;
                /* Heating up? */
                if (trend > 0)
                        for (i=0; i<passive->devices.count; i++)
                                acpi_processor_set_thermal_limit(
                                        passive->devices.handles[i],
                                        ACPI_PROCESSOR_LIMIT_INCREMENT);
                /* Cooling off? */
                else if (trend < 0)
                        for (i=0; i<passive->devices.count; i++)
                                acpi_processor_set_thermal_limit(
                                        passive->devices.handles[i],
                                        ACPI_PROCESSOR_LIMIT_DECREMENT);
        }
 
        /*
         * Below Trip?
         * -----------
         * Implement passive cooling hysteresis to slowly increase performance
         * and avoid thrashing around the passive trip point.  Note that we
         * assume symmetry.
         */
        else if (tz->trips.passive.flags.enabled) {
                for (i=0; i<passive->devices.count; i++)
                        result = acpi_processor_set_thermal_limit(
                                passive->devices.handles[i],
                                ACPI_PROCESSOR_LIMIT_DECREMENT);
                if (result == 1) {
                        tz->trips.passive.flags.enabled = 0;
                        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                "Disabling passive cooling (zone is cool)\n"));
                }
        }
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_active (
        struct acpi_thermal     *tz)
{
        int                     result = 0;
        struct acpi_thermal_active *active = NULL;
        int                     i = 0;
        int                     j = 0;
        unsigned long           maxtemp = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_active");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        for (i=0; i<ACPI_THERMAL_MAX_ACTIVE; i++) {
 
                active = &(tz->trips.active[i]);
                if (!active || !active->flags.valid)
                        break;
 
                /*
                 * Above Threshold?
                 * ----------------
                 * If not already enabled, turn ON all cooling devices
                 * associated with this active threshold.
                 */
                if (tz->temperature >= active->temperature) {
                        if (active->temperature > maxtemp)
                                tz->state.active_index = i, maxtemp = active->temperature;
                        if (!active->flags.enabled) {
                                for (j = 0; j < active->devices.count; j++) {
                                        result = acpi_bus_set_power(active->devices.handles[j], ACPI_STATE_D0);
                                        if (result) {
                                                ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Unable to turn cooling device [%p] 'on'\n", active->devices.handles[j]));
                                                continue;
                                        }
                                        active->flags.enabled = 1;
                                        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling device [%p] now 'on'\n", active->devices.handles[j]));
                                }
                        }
                }
                /*
                 * Below Threshold?
                 * ----------------
                 * Turn OFF all cooling devices associated with this
                 * threshold.
                 */
                else if (active->flags.enabled) {
                        for (j = 0; j < active->devices.count; j++) {
                                result = acpi_bus_set_power(active->devices.handles[j], ACPI_STATE_D3);
                                if (result) {
                                        ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Unable to turn cooling device [%p] 'off'\n", active->devices.handles[j]));
                                        continue;
                                }
                                active->flags.enabled = 0;
                                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling device [%p] now 'off'\n", active->devices.handles[j]));
                        }
                }
        }
 
        return_VALUE(0);
}
 
 
static void acpi_thermal_check (void *context);
 
static void
acpi_thermal_run (
        unsigned long           data)
{
        acpi_os_queue_for_execution(OSD_PRIORITY_GPE,  acpi_thermal_check, (void *) data);
}
 
 
static void
acpi_thermal_check (
        void                    *data)
{
        int                     result = 0;
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        unsigned long           sleep_time = 0;
        int                     i = 0;
        struct acpi_thermal_state state = tz->state;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_check");
 
        if (!tz) {
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid (NULL) context.\n"));
                return_VOID;
        }
 
        result = acpi_thermal_get_temperature(tz);
        if (result)
                return_VOID;
 
        memset(&tz->state, 0, sizeof(tz->state));
 
        /*
         * Check Trip Points
         * -----------------
         * Compare the current temperature to the trip point values to see
         * if we've entered one of the thermal policy states.  Note that
         * this function determines when a state is entered, but the
         * individual policy decides when it is exited (e.g. hysteresis).
         */
        if (tz->trips.critical.flags.valid)
                state.critical |= (tz->temperature >= tz->trips.critical.temperature);
        if (tz->trips.hot.flags.valid)
                state.hot |= (tz->temperature >= tz->trips.hot.temperature);
        if (tz->trips.passive.flags.valid)
                state.passive |= (tz->temperature >= tz->trips.passive.temperature);
        for (i=0; i<ACPI_THERMAL_MAX_ACTIVE; i++)
                if (tz->trips.active[i].flags.valid)
                        state.active |= (tz->temperature >= tz->trips.active[i].temperature);
 
        /*
         * Invoke Policy
         * -------------
         * Separated from the above check to allow individual policy to
         * determine when to exit a given state.
         */
        if (state.critical)
                acpi_thermal_critical(tz);
        if (state.hot)
                acpi_thermal_hot(tz);
        if (state.passive)
                acpi_thermal_passive(tz);
        if (state.active)
                acpi_thermal_active(tz);
 
        /*
         * Calculate State
         * ---------------
         * Again, separated from the above two to allow independent policy
         * decisions.
         */
        if (tz->trips.critical.flags.enabled)
                tz->state.critical = 1;
        if (tz->trips.hot.flags.enabled)
                tz->state.hot = 1;
        if (tz->trips.passive.flags.enabled)
                tz->state.passive = 1;
        for (i=0; i<ACPI_THERMAL_MAX_ACTIVE; i++)
                if (tz->trips.active[i].flags.enabled)
                        tz->state.active = 1;
 
        /*
         * Calculate Sleep Time
         * --------------------
         * If we're in the passive state, use _TSP's value.  Otherwise
         * use the default polling frequency (e.g. _TZP).  If no polling
         * frequency is specified then we'll wait forever (at least until
         * a thermal event occurs).  Note that _TSP and _TZD values are
         * given in 1/10th seconds (we must covert to milliseconds).
         */
        if (tz->state.passive)
                sleep_time = tz->trips.passive.tsp * 100;
        else if (tz->polling_frequency > 0)
                sleep_time = tz->polling_frequency * 100;
 
        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
                tz->name, tz->temperature, sleep_time));
 
        /*
         * Schedule Next Poll
         * ------------------
         */
        if (!sleep_time) {
                if (timer_pending(&(tz->timer)))
                        del_timer(&(tz->timer));
        }
        else {
                if (timer_pending(&(tz->timer)))
                        mod_timer(&(tz->timer), (HZ * sleep_time) / 1000);
                else {
                        tz->timer.data = (unsigned long) tz;
                        tz->timer.function = acpi_thermal_run;
                        tz->timer.expires = jiffies + (HZ * sleep_time) / 1000;
                        add_timer(&(tz->timer));
                }
        }
 
        return_VOID;
}
 
 
/* --------------------------------------------------------------------------
                              FS Interface (/proc)
   -------------------------------------------------------------------------- */
 
struct proc_dir_entry           *acpi_thermal_dir;
 
 
static int
acpi_thermal_read_state (
        char                    *page,
        char                    **start,
        off_t                   off,
        int                     count,
        int                     *eof,
        void                    *data)
{
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    *p = page;
        int                     len = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_read_state");
 
        if (!tz || (off != 0))
                goto end;
 
        p += sprintf(p, "state:                   ");
 
        if (!tz->state.critical && !tz->state.hot && !tz->state.passive && !tz->state.active)
                p += sprintf(p, "ok\n");
        else {
                if (tz->state.critical)
                        p += sprintf(p, "critical ");
                if (tz->state.hot)
                        p += sprintf(p, "hot ");
                if (tz->state.passive)
                        p += sprintf(p, "passive ");
                if (tz->state.active)
                        p += sprintf(p, "active[%d]", tz->state.active_index);
                p += sprintf(p, "\n");
        }
 
end:
        len = (p - page);
        if (len <= off+count) *eof = 1;
        *start = page + off;
        len -= off;
        if (len>count) len = count;
        if (len<0) len = 0;
 
        return_VALUE(len);
}
 
 
static int
acpi_thermal_read_temperature (
        char                    *page,
        char                    **start,
        off_t                   off,
        int                     count,
        int                     *eof,
        void                    *data)
{
        int                     result = 0;
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    *p = page;
        int                     len = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_read_temperature");
 
        if (!tz || (off != 0))
                goto end;
 
        result = acpi_thermal_get_temperature(tz);
        if (result)
                goto end;
 
        p += sprintf(p, "temperature:             %ld C\n",
                KELVIN_TO_CELSIUS(tz->temperature));
 
end:
        len = (p - page);
        if (len <= off+count) *eof = 1;
        *start = page + off;
        len -= off;
        if (len>count) len = count;
        if (len<0) len = 0;
 
        return_VALUE(len);
}
 
 
static int
acpi_thermal_read_trip_points (
        char                    *page,
        char                    **start,
        off_t                   off,
        int                     count,
        int                     *eof,
        void                    *data)
{
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    *p = page;
        int                     len = 0;
        int                     i = 0;
        int                     j = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_read_trip_points");
 
        if (!tz || (off != 0))
                goto end;
 
        if (tz->trips.critical.flags.valid)
                p += sprintf(p, "critical (S5):           %ld C\n",
                        KELVIN_TO_CELSIUS(tz->trips.critical.temperature));
 
        if (tz->trips.hot.flags.valid)
                p += sprintf(p, "hot (S4):                %ld C\n",
                        KELVIN_TO_CELSIUS(tz->trips.hot.temperature));
 
        if (tz->trips.passive.flags.valid) {
                p += sprintf(p, "passive:                 %ld C: tc1=%lu tc2=%lu tsp=%lu devices=",
                        KELVIN_TO_CELSIUS(tz->trips.passive.temperature),
                        tz->trips.passive.tc1,
                        tz->trips.passive.tc2,
                        tz->trips.passive.tsp);
                for (j=0; j<tz->trips.passive.devices.count; j++) {
 
                        p += sprintf(p, "0x%p ", tz->trips.passive.devices.handles[j]);
                }
                p += sprintf(p, "\n");
        }
 
        for (i=0; i<ACPI_THERMAL_MAX_ACTIVE; i++) {
                if (!(tz->trips.active[i].flags.valid))
                        break;
                p += sprintf(p, "active[%d]:               %ld C: devices=",
                        i, KELVIN_TO_CELSIUS(tz->trips.active[i].temperature));
                for (j=0; j<tz->trips.active[i].devices.count; j++)
                        p += sprintf(p, "0x%p ",
                                tz->trips.active[i].devices.handles[j]);
                p += sprintf(p, "\n");
        }
 
end:
        len = (p - page);
        if (len <= off+count) *eof = 1;
        *start = page + off;
        len -= off;
        if (len>count) len = count;
        if (len<0) len = 0;
 
        return_VALUE(len);
}
 
 
static int
acpi_thermal_write_trip_points (
        struct file             *file,
        const char              *buffer,
        unsigned long           count,
        void                    *data)
{
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    limit_string[25] = {'\0'};
        int                     critical, hot, passive, active0, active1;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_write_trip_points");
 
        if (!tz || (count > sizeof(limit_string) - 1)) {
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument\n"));
                return_VALUE(-EINVAL);
        }
 
        if (copy_from_user(limit_string, buffer, count)) {
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data\n"));
                return_VALUE(-EFAULT);
        }
 
        limit_string[count] = '\0';
 
        if (sscanf(limit_string, "%d:%d:%d:%d:%d", &critical, &hot, &passive, &active0, &active1) != 5) {
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
                return_VALUE(-EINVAL);
        }
 
        tz->trips.critical.temperature = CELSIUS_TO_KELVIN(critical);
        tz->trips.hot.temperature = CELSIUS_TO_KELVIN(hot);
        tz->trips.passive.temperature = CELSIUS_TO_KELVIN(passive);
        tz->trips.active[0].temperature = CELSIUS_TO_KELVIN(active0);
        tz->trips.active[1].temperature = CELSIUS_TO_KELVIN(active1);
 
        return_VALUE(count);
}
 
 
static int
acpi_thermal_read_cooling_mode (
        char                    *page,
        char                    **start,
        off_t                   off,
        int                     count,
        int                     *eof,
        void                    *data)
{
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    *p = page;
        int                     len = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_read_cooling_mode");
 
        if (!tz || (off != 0))
                goto end;
 
        if (!tz->flags.cooling_mode) {
                p += sprintf(p, "<not supported>\n");
                goto end;
        }
 
        p += sprintf(p, "cooling mode:            %s\n",
                tz->cooling_mode?"passive":"active");
 
end:
        len = (p - page);
        if (len <= off+count) *eof = 1;
        *start = page + off;
        len -= off;
        if (len>count) len = count;
        if (len<0) len = 0;
 
        return_VALUE(len);
}
 
 
static int
acpi_thermal_write_cooling_mode (
        struct file             *file,
        const char              *buffer,
        unsigned long           count,
        void                    *data)
{
        int                     result = 0;
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    mode_string[12] = {'\0'};
 
        ACPI_FUNCTION_TRACE("acpi_thermal_write_cooling_mode");
 
        if (!tz || (count > sizeof(mode_string) - 1))
                return_VALUE(-EINVAL);
 
        if (!tz->flags.cooling_mode)
                return_VALUE(-ENODEV);
 
        if (copy_from_user(mode_string, buffer, count))
                return_VALUE(-EFAULT);
 
        mode_string[count] = '\0';
 
        result = acpi_thermal_set_cooling_mode(tz,
                simple_strtoul(mode_string, NULL, 0));
        if (result)
                return_VALUE(result);
 
        return_VALUE(count);
}
 
 
static int
acpi_thermal_read_polling (
        char                    *page,
        char                    **start,
        off_t                   off,
        int                     count,
        int                     *eof,
        void                    *data)
{
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    *p = page;
        int                     len = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_read_polling");
 
        if (!tz || (off != 0))
                goto end;
 
        if (!tz->polling_frequency) {
                p += sprintf(p, "<polling disabled>\n");
                goto end;
        }
 
        p += sprintf(p, "polling frequency:       %lu seconds\n",
                (tz->polling_frequency / 10));
 
end:
        len = (p - page);
        if (len <= off+count) *eof = 1;
        *start = page + off;
        len -= off;
        if (len>count) len = count;
        if (len<0) len = 0;
 
        return_VALUE(len);
}
 
 
static int
acpi_thermal_write_polling (
        struct file             *file,
        const char              *buffer,
        unsigned long           count,
        void                    *data)
{
        int                     result = 0;
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        char                    polling_string[12] = {'\0'};
        int                     seconds = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_write_polling");
 
        if (!tz || (count > sizeof(polling_string) - 1))
                return_VALUE(-EINVAL);
 
        if (copy_from_user(polling_string, buffer, count))
                return_VALUE(-EFAULT);
 
        polling_string[count] = '\0';
 
        seconds = simple_strtoul(polling_string, NULL, 0);
 
        result = acpi_thermal_set_polling(tz, seconds);
        if (result)
                return_VALUE(result);
 
        acpi_thermal_check(tz);
 
        return_VALUE(count);
}
 
 
static int
acpi_thermal_add_fs (
        struct acpi_device      *device)
{
        struct proc_dir_entry   *entry = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_add_fs");
 
        if (!acpi_device_dir(device)) {
                acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
                        acpi_thermal_dir);
                if (!acpi_device_dir(device))
                        return_VALUE(-ENODEV);
        }
 
        /* 'state' [R] */
        entry = create_proc_entry(ACPI_THERMAL_FILE_STATE,
                S_IRUGO, acpi_device_dir(device));
        if (!entry)
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Unable to create '%s' fs entry\n",
                        ACPI_THERMAL_FILE_STATE));
        else {
                entry->read_proc = acpi_thermal_read_state;
                entry->data = acpi_driver_data(device);
        }
 
        /* 'temperature' [R] */
        entry = create_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
                S_IRUGO, acpi_device_dir(device));
        if (!entry)
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Unable to create '%s' fs entry\n",
                        ACPI_THERMAL_FILE_TEMPERATURE));
        else {
                entry->read_proc = acpi_thermal_read_temperature;
                entry->data = acpi_driver_data(device);
        }
 
        /* 'trip_points' [R/W] */
        entry = create_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
                S_IFREG|S_IRUGO|S_IWUSR, acpi_device_dir(device));
        if (!entry)
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Unable to create '%s' fs entry\n",
                        ACPI_THERMAL_FILE_POLLING_FREQ));
        else {
                entry->read_proc = acpi_thermal_read_trip_points;
                entry->write_proc = acpi_thermal_write_trip_points;
                entry->data = acpi_driver_data(device);
        }
 
        /* 'cooling_mode' [R/W] */
        entry = create_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE,
                S_IFREG|S_IRUGO|S_IWUSR, acpi_device_dir(device));
        if (!entry)
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Unable to create '%s' fs entry\n",
                        ACPI_THERMAL_FILE_COOLING_MODE));
        else {
                entry->read_proc = acpi_thermal_read_cooling_mode;
                entry->write_proc = acpi_thermal_write_cooling_mode;
                entry->data = acpi_driver_data(device);
        }
 
        /* 'polling_frequency' [R/W] */
        entry = create_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ,
                S_IFREG|S_IRUGO|S_IWUSR, acpi_device_dir(device));
        if (!entry)
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Unable to create '%s' fs entry\n",
                        ACPI_THERMAL_FILE_POLLING_FREQ));
        else {
                entry->read_proc = acpi_thermal_read_polling;
                entry->write_proc = acpi_thermal_write_polling;
                entry->data = acpi_driver_data(device);
        }
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_remove_fs (
        struct acpi_device      *device)
{
        ACPI_FUNCTION_TRACE("acpi_thermal_remove_fs");
 
        if (acpi_device_dir(device)) {
                remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir);
                acpi_device_dir(device) = NULL;
        }
 
        return_VALUE(0);
}
 
 
/* --------------------------------------------------------------------------
                                 Driver Interface
   -------------------------------------------------------------------------- */
 
static void
acpi_thermal_notify (
        acpi_handle             handle,
        u32                     event,
        void                    *data)
{
        struct acpi_thermal     *tz = (struct acpi_thermal *) data;
        struct acpi_device      *device = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_notify");
 
        if (!tz)
                return_VOID;
 
        if (acpi_bus_get_device(tz->handle, &device))
                return_VOID;
 
        switch (event) {
        case ACPI_THERMAL_NOTIFY_TEMPERATURE:
                acpi_thermal_check(tz);
                break;
        case ACPI_THERMAL_NOTIFY_THRESHOLDS:
                acpi_thermal_get_trip_points(tz);
                acpi_thermal_check(tz);
                acpi_bus_generate_event(device, event, 0);
                break;
        case ACPI_THERMAL_NOTIFY_DEVICES:
                if (tz->flags.devices)
                        acpi_thermal_get_devices(tz);
                acpi_bus_generate_event(device, event, 0);
                break;
        default:
                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                        "Unsupported event [0x%x]\n", event));
                break;
        }
 
        return_VOID;
}
 
 
static int
acpi_thermal_get_info (
        struct acpi_thermal     *tz)
{
        int                     result = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_get_info");
 
        if (!tz)
                return_VALUE(-EINVAL);
 
        /* Get temperature [_TMP] (required) */
        result = acpi_thermal_get_temperature(tz);
        if (result)
                return_VALUE(result);
 
        /* Set the cooling mode [_SCP] to active cooling (default) */
        result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
        if (!result)
                tz->flags.cooling_mode = 1;
 
        /* Get trip points [_CRT, _PSV, etc.] (required) */
        result = acpi_thermal_get_trip_points(tz);
        if (result)
                return_VALUE(result);
 
        /* Get default polling frequency [_TZP] (optional) */
        if (tzp)
                tz->polling_frequency = tzp;
        else
                acpi_thermal_get_polling_frequency(tz);
 
        /* Get devices in this thermal zone [_TZD] (optional) */
        result = acpi_thermal_get_devices(tz);
        if (!result)
                tz->flags.devices = 1;
 
        return_VALUE(0);
}
 
 
static int
acpi_thermal_add (
        struct acpi_device              *device)
{
        int                     result = 0;
        acpi_status             status = AE_OK;
        struct acpi_thermal     *tz = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_add");
 
        if (!device)
                return_VALUE(-EINVAL);
 
        tz = kmalloc(sizeof(struct acpi_thermal), GFP_KERNEL);
        if (!tz)
                return_VALUE(-ENOMEM);
        memset(tz, 0, sizeof(struct acpi_thermal));
 
        tz->handle = device->handle;
        sprintf(tz->name, "%s", device->pnp.bus_id);
        sprintf(acpi_device_name(device), "%s", ACPI_THERMAL_DEVICE_NAME);
        sprintf(acpi_device_class(device), "%s", ACPI_THERMAL_CLASS);
        acpi_driver_data(device) = tz;
 
        result = acpi_thermal_get_info(tz);
        if (result)
                goto end;
 
        result = acpi_thermal_add_fs(device);
        if (result)
                return_VALUE(result);
 
        init_timer(&tz->timer);
 
        acpi_thermal_check(tz);
 
        status = acpi_install_notify_handler(tz->handle,
                ACPI_DEVICE_NOTIFY, acpi_thermal_notify, tz);
        if (ACPI_FAILURE(status)) {
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Error installing notify handler\n"));
                result = -ENODEV;
                goto end;
        }
 
        printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
                acpi_device_name(device), acpi_device_bid(device),
                KELVIN_TO_CELSIUS(tz->temperature));
 
end:
        if (result) {
                acpi_thermal_remove_fs(device);
                kfree(tz);
        }
 
        return_VALUE(result);
}
 
 
static int
acpi_thermal_remove (
        struct acpi_device      *device,
        int                     type)
{
        acpi_status             status = AE_OK;
        struct acpi_thermal     *tz = NULL;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_remove");
 
        if (!device || !acpi_driver_data(device))
                return_VALUE(-EINVAL);
 
        tz = (struct acpi_thermal *) acpi_driver_data(device);
 
        if (timer_pending(&(tz->timer)))
                del_timer(&(tz->timer));
 
        status = acpi_remove_notify_handler(tz->handle,
                ACPI_DEVICE_NOTIFY, acpi_thermal_notify);
        if (ACPI_FAILURE(status))
                ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
                        "Error removing notify handler\n"));
 
        /* Terminate policy */
        if (tz->trips.passive.flags.valid
                && tz->trips.passive.flags.enabled) {
                tz->trips.passive.flags.enabled = 0;
                acpi_thermal_passive(tz);
        }
        if (tz->trips.active[0].flags.valid
                && tz->trips.active[0].flags.enabled) {
                tz->trips.active[0].flags.enabled = 0;
                acpi_thermal_active(tz);
        }
 
        acpi_thermal_remove_fs(device);
 
        return_VALUE(0);
}
 
 
static int __init
acpi_thermal_init (void)
{
        int                     result = 0;
 
        ACPI_FUNCTION_TRACE("acpi_thermal_init");
 
        acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
        if (!acpi_thermal_dir)
                return_VALUE(-ENODEV);
 
        result = acpi_bus_register_driver(&acpi_thermal_driver);
        if (result < 0) {
                remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
                return_VALUE(-ENODEV);
        }
 
        return_VALUE(0);
}
 
 
static void __exit
acpi_thermal_exit (void)
{
        ACPI_FUNCTION_TRACE("acpi_thermal_exit");
 
        acpi_bus_unregister_driver(&acpi_thermal_driver);
 
        remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
 
        return_VOID;
}
 
 
module_init(acpi_thermal_init);
module_exit(acpi_thermal_exit);
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [acpi/] [thermal.c] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1275	phoenix	`/*`
2			`* acpi_thermal.c - ACPI Thermal Zone Driver ($Revision: 1.1.1.1 $)`
3			`*`
4			`* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>`
5			`* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>`
6			`*`
7			`* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
8			`*`
9			`* This program is free software; you can redistribute it and/or modify`
10			`* it under the terms of the GNU General Public License as published by`
11			`* the Free Software Foundation; either version 2 of the License, or (at`
12			`* your option) any later version.`
13			`*`
14			`* This program is distributed in the hope that it will be useful, but`
15			`* WITHOUT ANY WARRANTY; without even the implied warranty of`
16			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
17			`* General Public License for more details.`
18			`*`
19			`* You should have received a copy of the GNU General Public License along`
20			`* with this program; if not, write to the Free Software Foundation, Inc.,`
21			`* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.`
22			`*`
23			`* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
24			`*`
25			`* This driver fully implements the ACPI thermal policy as described in the`
26			`* ACPI 2.0 Specification.`
27			`*`
28			`* TBD: 1. Implement passive cooling hysteresis.`
29			`* 2. Enhance passive cooling (CPU) states/limit interface to support`
30			`* concepts of 'multiple limiters', upper/lower limits, etc.`
31			`*`
32			`*/`
33
34			`#include <linux/kernel.h>`
35			`#include <linux/module.h>`
36			`#include <linux/init.h>`
37			`#include <linux/types.h>`
38			`#include <linux/compatmac.h>`
39			`#include <linux/proc_fs.h>`
40			`#include <linux/sched.h>`