Subversion Repositories or1k

/*

        fit3.c        (c) 1998  Grant R. Guenther <grant@torque.net>

                          Under the terms of the GNU General Public License.

        fit3.c is a low-level protocol driver for newer models

        of the Fidelity International Technology parallel port adapter.

        This adapter is used in their TransDisk 3000 portable

        hard-drives, as well as CD-ROM, PD-CD and other devices.

        The TD-2000 and certain older devices use a different protocol.

        Try the fit2 protocol module with them.

        NB:  The FIT adapters do not appear to support the control

        registers.  So, we map ALT_STATUS to STATUS and NO-OP writes

        to the device control register - this means that IDE reset

        will not work on these devices.

*/

#define FIT3_VERSION      "1.0"

#include <linux/module.h>

#include <linux/delay.h>

#include <linux/kernel.h>

#include <linux/types.h>

#include <linux/wait.h>

#include <asm/io.h>

#include "paride.h"

#define j44(a,b)                (((a>>3)&0x0f)|((b<<1)&0xf0))

#define w7(byte)                {out_p(7,byte);}

#define r7()                    (in_p(7) & 0xff)

/* cont = 0 - access the IDE register file

   cont = 1 - access the IDE command set

*/

static void  fit3_write_regr( PIA *pi, int cont, int regr, int val)

{       if (cont == 1) return;

        switch (pi->mode) {

        case 0:

        case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc);

                w0(val); w2(0xd);

                w0(0);   w2(0xc);

                break;

        case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);

                w4(val); w4(0);

                w2(0xc);

                break;

        }

}

static int fit3_read_regr( PIA *pi, int cont, int regr )

{       int  a, b;

        if (cont) {

          if (regr != 6) return 0xff;

          regr = 7;

        }

        switch (pi->mode) {

        case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);

                w2(0xd); a = r1();

                w2(0xf); b = r1();

                w2(0xc);

                return j44(a,b);

        case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);

                w2(0xec); w2(0xee); w2(0xef); a = r0();

                w2(0xc);

                return a;

        case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);

                w2(0xec);

                a = r4(); b = r4();

                w2(0xc);

                return a;

        }

        return -1;

}

static void fit3_read_block( PIA *pi, char * buf, int count )

{       int  k, a, b, c, d;

        switch (pi->mode) {

        case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);

                for (k=0;k<count/2;k++) {

                    w2(0xd); a = r1();

                    w2(0xf); b = r1();

                    w2(0xc); c = r1();

                    w2(0xe); d = r1();

                    buf[2*k  ] = j44(a,b);

                    buf[2*k+1] = j44(c,d);

                }

                w2(0xc);

                break;

        case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc);

                w2(0xec); w2(0xee);

                for (k=0;k<count/2;k++) {

                    w2(0xef); a = r0();

                    w2(0xee); b = r0();

                    buf[2*k  ] = a;

                    buf[2*k+1] = b;

                }

                w2(0xec);

                w2(0xc);

                break;

        case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc);

                w2(0xec);

                for (k=0;k<count;k++) buf[k] = r4();

                w2(0xc);

                break;

        }

}

static void fit3_write_block( PIA *pi, char * buf, int count )

{       int k;

        switch (pi->mode) {

        case 0:

        case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);

                for (k=0;k<count/2;k++) {

                    w0(buf[2*k  ]); w2(0xd);

                    w0(buf[2*k+1]); w2(0xc);

                }

                break;

        case 2: w2(0xc); w0(0); w2(0x8); w2(0xc);

                for (k=0;k<count;k++) w4(buf[k]);

                w2(0xc);

                break;

        }

}

static void fit3_connect ( PIA *pi  )

{       pi->saved_r0 = r0();

        pi->saved_r2 = r2();

        w2(0xc); w0(0); w2(0xa);

        if (pi->mode == 2) {

                w2(0xc); w0(0x9); w2(0x8); w2(0xc);

                }

}

static void fit3_disconnect ( PIA *pi )

{       w2(0xc); w0(0xa); w2(0x8); w2(0xc);

        w0(pi->saved_r0);

        w2(pi->saved_r2);

}

static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )

{       char    *mode_string[3] = {"4-bit","8-bit","EPP"};

        printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "

               "mode %d (%s), delay %d\n",

                pi->device,FIT3_VERSION,pi->port,

                pi->mode,mode_string[pi->mode],pi->delay);

}

static void fit3_init_proto(PIA *pi)

{       MOD_INC_USE_COUNT;

}

static void fit3_release_proto(PIA *pi)

{       MOD_DEC_USE_COUNT;

}

struct pi_protocol fit3 = {"fit3",0,3,2,1,1,

                           fit3_write_regr,

                           fit3_read_regr,

                           fit3_write_block,

                           fit3_read_block,

                           fit3_connect,

                           fit3_disconnect,

                           0,

                           0,

                           0,

                           fit3_log_adapter,

                           fit3_init_proto,

                           fit3_release_proto

                          };

#ifdef MODULE

int     init_module(void)

{       return pi_register( &fit3 ) - 1;

}

void    cleanup_module(void)

{       pi_unregister( &fit3 );

}

#endif

/* end of fit3.c */

MODULE_LICENSE("GPL");