URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [au1000_usbtty.c] - Blame information for rev 1765

Details | Compare with Previous | View Log

/*
 * BRIEF MODULE DESCRIPTION
 *      Au1x00 USB Device-Side Serial TTY Driver (function layer)
 *
 * Copyright 2001-2002 MontaVista Software Inc.
 * Author: MontaVista Software, Inc.
 *              stevel@mvista.com or source@mvista.com
 *
 *  Derived from drivers/usb/serial/usbserial.c:
 *
 *  Copyright (C) 1999 - 2001 Greg Kroah-Hartman (greg@kroah.com)
 *  Copyright (c) 2000 Peter Berger (pberger@brimson.com)
 *  Copyright (c) 2000 Al Borchers (borchers@steinerpoint.com)
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/fcntl.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/smp_lock.h>
#undef DEBUG
#include <linux/usb.h>
 
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/au1000.h>
#include <asm/au1000_usbdev.h>
 
 
/* local function prototypes */
static int serial_open(struct tty_struct *tty, struct file *filp);
static void serial_close(struct tty_struct *tty, struct file *filp);
static int serial_write(struct tty_struct *tty, int from_user,
                        const unsigned char *buf, int count);
static int serial_write_room(struct tty_struct *tty);
static int serial_chars_in_buffer(struct tty_struct *tty);
static void serial_throttle(struct tty_struct *tty);
static void serial_unthrottle(struct tty_struct *tty);
static int serial_ioctl(struct tty_struct *tty, struct file *file,
                        unsigned int cmd, unsigned long arg);
static void serial_set_termios (struct tty_struct *tty, struct termios * old);
 
#define SERIAL_TTY_MAJOR 189 // FIXME: need a legal major
 
#define MAX_NUM_PORTS 2
 
#define IN_MAX_PACKET_SIZE  32
#define OUT_MAX_PACKET_SIZE 32
 
// FIXME: when Au1x00 endpoints 3 and 5 are fixed, make NUM_PORTS=2
#define NUM_PORTS 2
#define NUM_EP 2*NUM_PORTS
 
#define CONFIG_DESC_LEN \
 USB_DT_CONFIG_SIZE + USB_DT_INTERFACE_SIZE + NUM_EP*USB_DT_ENDPOINT_SIZE
 
struct usb_serial_port {
        struct tty_struct *tty;    /* the coresponding tty for this port */
        unsigned char number;
        spinlock_t port_lock;
 
        struct usb_endpoint_descriptor* out_desc;
        struct usb_endpoint_descriptor* in_desc;
 
        int out_ep_addr; /* endpoint address of OUT endpoint */
        int in_ep_addr;  /* endpoint address of IN endpoint */
 
        /* task queue for line discipline waking up on send packet complete */
        struct tq_struct send_complete_tq;
        /* task queue for line discipline wakeup on receive packet complete */
        struct tq_struct receive_complete_tq;
 
        int active;     /* someone has this device open */
        int writing;    /* a packet write is in progress */
        int open_count; /* number of times this port has been opened */
 
};
 
static struct usb_serial {
        usbdev_state_t dev_state; // current state of device layer
        struct usb_device_descriptor* dev_desc;
        struct usb_config_descriptor* config_desc;
        struct usb_interface_descriptor* if_desc;
        struct usb_string_descriptor * str_desc[6];
        void* str_desc_buf;
 
        struct usb_serial_port port[NUM_PORTS];
} usbtty;
 
static int                 serial_refcount;
static struct tty_driver   serial_tty_driver;
static struct tty_struct * serial_tty[NUM_PORTS];
static struct termios *    serial_termios[NUM_PORTS];
static struct termios *    serial_termios_locked[NUM_PORTS];
 
static struct usb_device_descriptor dev_desc = {
        bLength:USB_DT_DEVICE_SIZE,
        bDescriptorType:USB_DT_DEVICE,
        bcdUSB:USBDEV_REV,              //usb rev
        bDeviceClass:USB_CLASS_PER_INTERFACE,   //class    (none)
        bDeviceSubClass:0x00,   //subclass (none)
        bDeviceProtocol:0x00,   //protocol (none)
        bMaxPacketSize0:USBDEV_EP0_MAX_PACKET_SIZE, //max packet size for ep0
        idVendor:0x6d04,        //vendor  id
        idProduct:0x0bc0,       //product id
        bcdDevice:0x0001,       //BCD rev 0.1
        iManufacturer:0x01,     //manufactuer string index
        iProduct:0x02,          //product string index
        iSerialNumber:0x03,     //serial# string index
        bNumConfigurations:0x01 //num configurations
};
 
static struct usb_endpoint_descriptor ep_desc[] = {
        {
                // Bulk IN for Port 0
                bLength:USB_DT_ENDPOINT_SIZE,
                bDescriptorType:USB_DT_ENDPOINT,
                bEndpointAddress:USB_DIR_IN,
                bmAttributes:USB_ENDPOINT_XFER_BULK,
                wMaxPacketSize:IN_MAX_PACKET_SIZE,
                bInterval:0x00  // ignored for bulk
        },
        {
                // Bulk OUT for Port 0
                bLength:USB_DT_ENDPOINT_SIZE,
                bDescriptorType:USB_DT_ENDPOINT,
                bEndpointAddress:USB_DIR_OUT,
                bmAttributes:USB_ENDPOINT_XFER_BULK,
                wMaxPacketSize:OUT_MAX_PACKET_SIZE,
                bInterval:0x00  // ignored for bulk
        },
        {
                // Bulk IN for Port 1
                bLength:USB_DT_ENDPOINT_SIZE,
                bDescriptorType:USB_DT_ENDPOINT,
                bEndpointAddress:USB_DIR_IN,
                bmAttributes:USB_ENDPOINT_XFER_BULK,
                wMaxPacketSize:IN_MAX_PACKET_SIZE,
                bInterval:0x00  // ignored for bulk
        },
        {
                // Bulk OUT for Port 1
                bLength:USB_DT_ENDPOINT_SIZE,
                bDescriptorType:USB_DT_ENDPOINT,
                bEndpointAddress:USB_DIR_OUT,
                bmAttributes:USB_ENDPOINT_XFER_BULK,
                wMaxPacketSize:OUT_MAX_PACKET_SIZE,
                bInterval:0x00  // ignored for bulk
        }
};
 
static struct usb_interface_descriptor if_desc = {
        bLength:USB_DT_INTERFACE_SIZE,
        bDescriptorType:USB_DT_INTERFACE,
        bInterfaceNumber:0x00,
        bAlternateSetting:0x00,
        bNumEndpoints:NUM_EP,
        bInterfaceClass:0xff,
        bInterfaceSubClass:0xab,
        bInterfaceProtocol:0x00,
        iInterface:0x05
};
 
static struct usb_config_descriptor config_desc = {
        bLength:USB_DT_CONFIG_SIZE,
        bDescriptorType:USB_DT_CONFIG,
        wTotalLength:CONFIG_DESC_LEN,
        bNumInterfaces:0x01,
        bConfigurationValue:0x01,
        iConfiguration:0x04,    // configuration string
        bmAttributes:0xc0,      // self-powered
        MaxPower:20             // 40 mA
};
 
// String[0] is a list of Language IDs supported by this device
static struct usb_string_descriptor string_desc0 = {
        bLength:4,
        bDescriptorType:USB_DT_STRING,
        wData:{0x0409} // English, US
};
 
// These strings will be converted to Unicode in string_desc[]
static char *strings[5] = {
        "Alchemy Semiconductor",  // iManufacturer
        "WutzAMattaU",            // iProduct
        "1.0.doh!",               // iSerialNumber
        "Au1000 TTY Config",      // iConfiguration
        "Au1000 TTY Interface"    // iInterface
};
 
static inline int
port_paranoia_check(struct usb_serial_port *port, const char *function)
{
        if (!port) {
                err("%s: port is NULL", function);
                return -1;
        }
        if (!port->tty) {
                err("%s: port->tty is NULL", function);
                return -1;
        }
 
        return 0;
}
 
 
static void
port_rx_callback(struct usb_serial_port *port)
{
        dbg(__FUNCTION__ ": ep%d", port->out_ep_addr);
        // mark a bh to push this data up to the tty
        queue_task(&port->receive_complete_tq, &tq_immediate);
        mark_bh(IMMEDIATE_BH);
}
 
static void
port_tx_callback(struct usb_serial_port *port, usbdev_pkt_t* pkt)
{
        dbg(__FUNCTION__ ": ep%d", port->in_ep_addr);
        // mark a bh to wakeup any tty write system call on the port.
        queue_task(&port->send_complete_tq, &tq_immediate);
        mark_bh(IMMEDIATE_BH);
 
        /* free the returned packet */
        kfree(pkt);
}
 
static void
usbtty_callback(usbdev_cb_type_t cb_type, unsigned long arg, void* data)
{
        usbdev_pkt_t* pkt;
        int i;
 
        switch (cb_type) {
        case CB_NEW_STATE:
                dbg(__FUNCTION__ ": new dev_state=%d", (int)arg);
                usbtty.dev_state = (usbdev_state_t)arg;
                break;
        case CB_PKT_COMPLETE:
                pkt = (usbdev_pkt_t*)arg;
                for (i=0; i<NUM_PORTS; i++) {
                        struct usb_serial_port *port = &usbtty.port[i];
                        if (pkt->ep_addr == port->in_ep_addr) {
                                port_tx_callback(port, pkt);
                                break;
                        } else if (pkt->ep_addr == port->out_ep_addr) {
                                port_rx_callback(port);
                                break;
                        }
                }
                break;
        }
}
 
 
/*****************************************************************************
 * Here begins the tty driver interface functions
 *****************************************************************************/
 
static int serial_open(struct tty_struct *tty, struct file *filp)
{
        int portNumber;
        struct usb_serial_port *port;
        unsigned long flags;
 
        /* initialize the pointer incase something fails */
        tty->driver_data = NULL;
 
        MOD_INC_USE_COUNT;
 
        /* set up our port structure making the tty driver remember
           our port object, and us it */
        portNumber = MINOR(tty->device);
        port = &usbtty.port[portNumber];
        tty->driver_data = port;
        port->tty = tty;
 
        if (usbtty.dev_state != CONFIGURED ||
            port_paranoia_check(port, __FUNCTION__)) {
                /*
                 * the device-layer must be in the configured state before
                 * the function layer can operate.
                 */
                MOD_DEC_USE_COUNT;
                return -ENODEV;
        }
 
        dbg(__FUNCTION__ ": port %d", port->number);
 
        spin_lock_irqsave(&port->port_lock, flags);
 
        ++port->open_count;
 
        if (!port->active) {
                port->active = 1;
 
                /*
                 * force low_latency on so that our tty_push actually forces
                 * the data through, otherwise it is scheduled, and with high
                 * data rates (like with OHCI) data can get lost.
                 */
                port->tty->low_latency = 1;
 
        }
 
        spin_unlock_irqrestore(&port->port_lock, flags);
 
        return 0;
}
 
 
static void serial_close(struct tty_struct *tty, struct file *filp)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
        unsigned long flags;
 
        dbg(__FUNCTION__ ": port %d", port->number);
 
        if (!port->active) {
                err(__FUNCTION__ ": port not opened");
                return;
        }
 
        spin_lock_irqsave(&port->port_lock, flags);
 
        --port->open_count;
 
        if (port->open_count <= 0) {
                port->active = 0;
                port->open_count = 0;
        }
 
        spin_unlock_irqrestore(&port->port_lock, flags);
        MOD_DEC_USE_COUNT;
}
 
 
static int serial_write(struct tty_struct *tty, int from_user,
                        const unsigned char *buf, int count)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
        usbdev_pkt_t* pkt;
        int max_pkt_sz, ret;
        unsigned long flags;
 
        /*
         * the device-layer must be in the configured state before the
         * function layer can operate.
         */
        if (usbtty.dev_state != CONFIGURED)
                return -ENODEV;
 
        if (!port->active) {
                err(__FUNCTION__ ": port not open");
                return -EINVAL;
        }
 
        if (count == 0) {
                dbg(__FUNCTION__ ": request of 0 bytes");
                return (0);
        }
 
#if 0
        if (port->writing) {
                dbg(__FUNCTION__ ": already writing");
                return 0;
        }
#endif
 
        max_pkt_sz = port->in_desc->wMaxPacketSize;
        count = (count > max_pkt_sz) ? max_pkt_sz : count;
 
        if ((ret = usbdev_alloc_packet(port->in_ep_addr, count, &pkt)))
                return ret;
 
        if (from_user)
                copy_from_user(pkt->payload, buf, count);
        else
                memcpy(pkt->payload, buf, count);
 
        ret = usbdev_send_packet(port->in_ep_addr, pkt);
 
        spin_lock_irqsave(&port->port_lock, flags);
        port->writing = 1;
        spin_unlock_irqrestore(&port->port_lock, flags);
 
        return ret;
}
 
 
static int serial_write_room(struct tty_struct *tty)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
        int room = 0;
 
        /*
         * the device-layer must be in the configured state before the
         * function layer can operate.
         */
        if (usbtty.dev_state != CONFIGURED)
                return -ENODEV;
 
        if (!port->active) {
                err(__FUNCTION__ ": port not open");
                return -EINVAL;
        }
 
        //room = port->writing ? 0 : port->in_desc->wMaxPacketSize;
        room = port->in_desc->wMaxPacketSize;
 
        dbg(__FUNCTION__ ": %d", room);
        return room;
}
 
 
static int serial_chars_in_buffer(struct tty_struct *tty)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
        int chars = 0;
 
        /*
         * the device-layer must be in the configured state before the
         * function layer can operate.
         */
        if (usbtty.dev_state != CONFIGURED)
                return -ENODEV;
 
        if (!port->active) {
                err(__FUNCTION__ ": port not open");
                return -EINVAL;
        }
 
        //chars = port->writing ? usbdev_get_byte_count(port->in_ep_addr) : 0;
        chars = usbdev_get_byte_count(port->in_ep_addr);
 
        dbg(__FUNCTION__ ": %d", chars);
        return chars;
}
 
 
static void serial_throttle(struct tty_struct *tty)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
 
        if (!port->active || usbtty.dev_state != CONFIGURED) {
                err(__FUNCTION__ ": port not open");
                return;
        }
 
        // FIXME: anything to do?
        dbg(__FUNCTION__);
}
 
 
static void serial_unthrottle(struct tty_struct *tty)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
 
        if (!port->active || usbtty.dev_state != CONFIGURED) {
                err(__FUNCTION__ ": port not open");
                return;
        }
 
        // FIXME: anything to do?
        dbg(__FUNCTION__);
}
 
 
static int serial_ioctl(struct tty_struct *tty, struct file *file,
                        unsigned int cmd, unsigned long arg)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
 
        if (!port->active) {
                err(__FUNCTION__ ": port not open");
                return -ENODEV;
        }
        // FIXME: need any IOCTLs?
        dbg(__FUNCTION__);
 
        return -ENOIOCTLCMD;
}
 
 
static void serial_set_termios(struct tty_struct *tty, struct termios *old)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
 
        if (!port->active || usbtty.dev_state != CONFIGURED)  {
                err(__FUNCTION__ ": port not open");
                return;
        }
 
        dbg(__FUNCTION__);
        // FIXME: anything to do?
}
 
 
static void serial_break(struct tty_struct *tty, int break_state)
{
        struct usb_serial_port *port =
                (struct usb_serial_port *) tty->driver_data;
 
        if (!port->active || usbtty.dev_state != CONFIGURED)  {
                err(__FUNCTION__ ": port not open");
                return;
        }
 
        dbg(__FUNCTION__);
        // FIXME: anything to do?
}
 
 
static void port_send_complete(void *private)
{
        struct usb_serial_port *port = (struct usb_serial_port *) private;
        struct tty_struct *tty;
        unsigned long flags;
 
        dbg(__FUNCTION__ ": port %d, ep%d", port->number, port->in_ep_addr);
 
        tty = port->tty;
        if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
            tty->ldisc.write_wakeup) {
                dbg(__FUNCTION__ ": write wakeup call.");
                (tty->ldisc.write_wakeup) (tty);
        }
 
        wake_up_interruptible(&tty->write_wait);
 
        spin_lock_irqsave(&port->port_lock, flags);
        port->writing = usbdev_get_byte_count(port->in_ep_addr) <= 0 ? 0 : 1;
        spin_unlock_irqrestore(&port->port_lock, flags);
}
 
 
static void port_receive_complete(void *private)
{
        struct usb_serial_port *port = (struct usb_serial_port *) private;
        struct tty_struct *tty = port->tty;
        usbdev_pkt_t* pkt = NULL;
        int i, count;
 
        /* while there is a packet available */
        while ((count = usbdev_receive_packet(port->out_ep_addr,
                                              &pkt)) != -ENODATA) {
                if (count < 0) {
                        if (pkt)
                                kfree(pkt);
                        break; /* exit if error other than ENODATA */
                }
 
                dbg(__FUNCTION__ ": port %d, ep%d, size=%d",
                    port->number, port->out_ep_addr, count);
 
                for (i = 0; i < count; i++) {
                        /* if we insert more than TTY_FLIPBUF_SIZE characters,
                           we drop them. */
                        if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
                                tty_flip_buffer_push(tty);
                        }
                        /* this doesn't actually push the data through
                           unless tty->low_latency is set */
                        tty_insert_flip_char(tty, pkt->payload[i], 0);
                }
                tty_flip_buffer_push(tty);
 
                kfree(pkt); /* make sure we free the packet */
        }
 
}
 
 
static struct tty_driver serial_tty_driver = {
        magic:TTY_DRIVER_MAGIC,
        driver_name:"usbfn-tty",
        name:"usb/ttsdev/%d",
        major:SERIAL_TTY_MAJOR,
        minor_start:0,
        num:NUM_PORTS,
        type:TTY_DRIVER_TYPE_SERIAL,
        subtype:SERIAL_TYPE_NORMAL,
        flags:TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS,
        refcount:&serial_refcount,
        table:serial_tty,
        termios:serial_termios,
        termios_locked:serial_termios_locked,
 
        open:serial_open,
        close:serial_close,
        write:serial_write,
        write_room:serial_write_room,
        ioctl:serial_ioctl,
        set_termios:serial_set_termios,
        throttle:serial_throttle,
        unthrottle:serial_unthrottle,
        break_ctl:serial_break,
        chars_in_buffer:serial_chars_in_buffer,
};
 
 
void usbfn_tty_exit(void)
{
        int i;
 
        /* kill the device layer */
        usbdev_exit();
 
        for (i=0; i < NUM_PORTS; i++) {
                tty_unregister_devfs(&serial_tty_driver, i);
                info("usb serial converter now disconnected from ttyUSBdev%d",
                     i);
        }
 
        tty_unregister_driver(&serial_tty_driver);
 
        if (usbtty.str_desc_buf)
                kfree(usbtty.str_desc_buf);
}
 
 
int usbfn_tty_init(void)
{
        int ret = 0, i, str_desc_len;
 
        /* register the tty driver */
        serial_tty_driver.init_termios = tty_std_termios;
        serial_tty_driver.init_termios.c_cflag =
                B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 
        if (tty_register_driver(&serial_tty_driver)) {
                err(__FUNCTION__ ": failed to register tty driver");
                ret = -ENXIO;
                goto out;
        }
 
        /*
         * initialize pointers to descriptors
         */
        usbtty.dev_desc = &dev_desc;
        usbtty.config_desc = &config_desc;
        usbtty.if_desc = &if_desc;
 
        /*
         * initialize the string descriptors
         */
 
        /* alloc buffer big enough for all string descriptors */
        str_desc_len = string_desc0.bLength;
        for (i = 0; i < 5; i++)
                str_desc_len += 2 + 2 * strlen(strings[i]);
        usbtty.str_desc_buf = (void *) kmalloc(str_desc_len, GFP_KERNEL);
        if (!usbtty.str_desc_buf) {
                err(__FUNCTION__ ": failed to alloc string descriptors");
                ret = -ENOMEM;
                goto out;
        }
 
        usbtty.str_desc[0] =
                (struct usb_string_descriptor *)usbtty.str_desc_buf;
        memcpy(usbtty.str_desc[0], &string_desc0, string_desc0.bLength);
        usbtty.str_desc[1] = (struct usb_string_descriptor *)
                (usbtty.str_desc_buf + string_desc0.bLength);
        for (i = 1; i < 6; i++) {
                struct usb_string_descriptor *desc = usbtty.str_desc[i];
                char *str = strings[i - 1];
                int j, str_len = strlen(str);
 
                desc->bLength = 2 + 2 * str_len;
                desc->bDescriptorType = USB_DT_STRING;
                for (j = 0; j < str_len; j++) {
                        desc->wData[j] = (u16) str[j];
                }
                if (i < 5)
                        usbtty.str_desc[i + 1] =
                                (struct usb_string_descriptor *)
                                ((u8 *) desc + desc->bLength);
        }
 
        /*
         * start the device layer. The device layer assigns us
         * our endpoint addresses
         */
        if ((ret = usbdev_init(&dev_desc, &config_desc, &if_desc, ep_desc,
                               usbtty.str_desc, usbtty_callback, NULL))) {
                err(__FUNCTION__ ": device-layer init failed");
                goto out;
        }
 
        /* initialize the devfs nodes for this device and let the user
           know what ports we are bound to */
        for (i = 0; i < NUM_PORTS; ++i) {
                struct usb_serial_port *port;
                tty_register_devfs(&serial_tty_driver, 0, i);
                info("usbdev serial attached to ttyUSBdev%d "
                     "(or devfs usb/ttsdev/%d)", i, i);
                port = &usbtty.port[i];
                port->number = i;
                port->in_desc = &ep_desc[NUM_PORTS*i];
                port->out_desc = &ep_desc[NUM_PORTS*i + 1];
                port->in_ep_addr = port->in_desc->bEndpointAddress & 0x0f;
                port->out_ep_addr = port->out_desc->bEndpointAddress & 0x0f;
                port->send_complete_tq.routine = port_send_complete;
                port->send_complete_tq.data = port;
                port->receive_complete_tq.routine = port_receive_complete;
                port->receive_complete_tq.data = port;
                spin_lock_init(&port->port_lock);
        }
 
 out:
        if (ret)
                usbfn_tty_exit();
        return ret;
}
 
 
/* Module information */
MODULE_AUTHOR("Steve Longerbeam, stevel@mvista.com, www.mvista.com");
MODULE_DESCRIPTION("Au1x00 USB Device-Side Serial TTY Driver");
MODULE_LICENSE("GPL");
 
module_init(usbfn_tty_init);
module_exit(usbfn_tty_exit);
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [linux/] [linux-2.4/] [drivers/] [char/] [au1000_usbtty.c] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1275	phoenix	`/*`
2			`* BRIEF MODULE DESCRIPTION`
3			`* Au1x00 USB Device-Side Serial TTY Driver (function layer)`
4			`*`
5			`* Copyright 2001-2002 MontaVista Software Inc.`
6			`* Author: MontaVista Software, Inc.`
7			`* stevel@mvista.com or source@mvista.com`
8			`*`
9			`* Derived from drivers/usb/serial/usbserial.c:`
10			`*`
11			`* Copyright (C) 1999 - 2001 Greg Kroah-Hartman (greg@kroah.com)`
12			`* Copyright (c) 2000 Peter Berger (pberger@brimson.com)`
13			`* Copyright (c) 2000 Al Borchers (borchers@steinerpoint.com)`
14			`*`
15			`* This program is free software; you can redistribute it and/or modify it`
16			`* under the terms of the GNU General Public License as published by the`
17			`* Free Software Foundation; either version 2 of the License, or (at your`
18			`* option) any later version.`
19			`*`
20			* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21			`* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF`
22			`* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN`
23			`* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,`
24			`* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT`
25			`* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF`
26			`* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON`
27			`* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT`
28			`* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF`
29			`* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.`
30			`*`
31			`* You should have received a copy of the GNU General Public License along`
32			`* with this program; if not, write to the Free Software Foundation, Inc.,`
33			`* 675 Mass Ave, Cambridge, MA 02139, USA.`
34			`*/`
35
36			`#include <linux/config.h>`
37			`#include <linux/kernel.h>`
38			`#include <linux/ioport.h>`
39			`#include <linux/sched.h>`
40			`#include <linux/signal.h>`