| 1 |
1275 |
phoenix |
/*
|
| 2 |
|
|
bttv-cards.c
|
| 3 |
|
|
|
| 4 |
|
|
this file has configuration informations - card-specific stuff
|
| 5 |
|
|
like the big tvcards array for the most part
|
| 6 |
|
|
|
| 7 |
|
|
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
|
| 8 |
|
|
& Marcus Metzler (mocm@thp.uni-koeln.de)
|
| 9 |
|
|
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
|
| 10 |
|
|
|
| 11 |
|
|
This program is free software; you can redistribute it and/or modify
|
| 12 |
|
|
it under the terms of the GNU General Public License as published by
|
| 13 |
|
|
the Free Software Foundation; either version 2 of the License, or
|
| 14 |
|
|
(at your option) any later version.
|
| 15 |
|
|
|
| 16 |
|
|
This program is distributed in the hope that it will be useful,
|
| 17 |
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 18 |
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
| 19 |
|
|
GNU General Public License for more details.
|
| 20 |
|
|
|
| 21 |
|
|
You should have received a copy of the GNU General Public License
|
| 22 |
|
|
along with this program; if not, write to the Free Software
|
| 23 |
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
| 24 |
|
|
|
| 25 |
|
|
*/
|
| 26 |
|
|
|
| 27 |
|
|
#include <linux/config.h>
|
| 28 |
|
|
#include <linux/delay.h>
|
| 29 |
|
|
#include <linux/module.h>
|
| 30 |
|
|
#include <linux/kmod.h>
|
| 31 |
|
|
#include <linux/init.h>
|
| 32 |
|
|
#include <linux/pci.h>
|
| 33 |
|
|
#include <linux/vmalloc.h>
|
| 34 |
|
|
#ifdef CONFIG_FW_LOADER
|
| 35 |
|
|
# include <linux/firmware.h>
|
| 36 |
|
|
#endif
|
| 37 |
|
|
|
| 38 |
|
|
#include <asm/io.h>
|
| 39 |
|
|
|
| 40 |
|
|
#include "bttvp.h"
|
| 41 |
|
|
#include "bt832.h"
|
| 42 |
|
|
|
| 43 |
|
|
/* fwd decl */
|
| 44 |
|
|
static void boot_msp34xx(struct bttv *btv, int pin);
|
| 45 |
|
|
static void boot_bt832(struct bttv *btv);
|
| 46 |
|
|
static void hauppauge_eeprom(struct bttv *btv);
|
| 47 |
|
|
static void avermedia_eeprom(struct bttv *btv);
|
| 48 |
|
|
static void osprey_eeprom(struct bttv *btv);
|
| 49 |
|
|
static void modtec_eeprom(struct bttv *btv);
|
| 50 |
|
|
static void init_PXC200(struct bttv *btv);
|
| 51 |
|
|
|
| 52 |
|
|
static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 53 |
|
|
static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 54 |
|
|
static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
|
| 55 |
|
|
int set);
|
| 56 |
|
|
static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 57 |
|
|
static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 58 |
|
|
static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 59 |
|
|
static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 60 |
|
|
static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 61 |
|
|
static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 62 |
|
|
static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
|
| 63 |
|
|
static void rv605_muxsel(struct bttv *btv, unsigned int input);
|
| 64 |
|
|
static void eagle_muxsel(struct bttv *btv, unsigned int input);
|
| 65 |
|
|
static void xguard_muxsel(struct bttv *btv, unsigned int input);
|
| 66 |
|
|
|
| 67 |
|
|
static int terratec_active_radio_upgrade(struct bttv *btv);
|
| 68 |
|
|
static int tea5757_read(struct bttv *btv);
|
| 69 |
|
|
static int tea5757_write(struct bttv *btv, int value);
|
| 70 |
|
|
static void identify_by_eeprom(struct bttv *btv,
|
| 71 |
|
|
unsigned char eeprom_data[256]);
|
| 72 |
|
|
|
| 73 |
|
|
/* config variables */
|
| 74 |
|
|
static unsigned int triton1=0;
|
| 75 |
|
|
static unsigned int vsfx=0;
|
| 76 |
|
|
static unsigned int latency = UNSET;
|
| 77 |
|
|
unsigned int no_overlay=-1;
|
| 78 |
|
|
|
| 79 |
|
|
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
|
| 80 |
|
|
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
|
| 81 |
|
|
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
|
| 82 |
|
|
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET};
|
| 83 |
|
|
#ifdef MODULE
|
| 84 |
|
|
static unsigned int autoload = 1;
|
| 85 |
|
|
#else
|
| 86 |
|
|
static unsigned int autoload = 0;
|
| 87 |
|
|
#endif
|
| 88 |
|
|
static unsigned int gpiomask = UNSET;
|
| 89 |
|
|
static unsigned int audioall = UNSET;
|
| 90 |
|
|
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
|
| 91 |
|
|
|
| 92 |
|
|
/* insmod options */
|
| 93 |
|
|
MODULE_PARM(triton1,"i");
|
| 94 |
|
|
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
|
| 95 |
|
|
"[enable bug compatibility for triton1 + others]");
|
| 96 |
|
|
MODULE_PARM(vsfx,"i");
|
| 97 |
|
|
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
|
| 98 |
|
|
"[yet another chipset flaw workaround]");
|
| 99 |
|
|
MODULE_PARM(no_overlay,"i");
|
| 100 |
|
|
MODULE_PARM(latency,"i");
|
| 101 |
|
|
MODULE_PARM_DESC(latency,"pci latency timer");
|
| 102 |
|
|
MODULE_PARM(card,"1-" __stringify(BTTV_MAX) "i");
|
| 103 |
|
|
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
|
| 104 |
|
|
MODULE_PARM(pll,"1-" __stringify(BTTV_MAX) "i");
|
| 105 |
|
|
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
|
| 106 |
|
|
MODULE_PARM(tuner,"1-" __stringify(BTTV_MAX) "i");
|
| 107 |
|
|
MODULE_PARM_DESC(tuner,"specify installed tuner type");
|
| 108 |
|
|
MODULE_PARM(autoload,"i");
|
| 109 |
|
|
MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
|
| 110 |
|
|
MODULE_PARM(gpiomask,"i");
|
| 111 |
|
|
MODULE_PARM(audioall,"i");
|
| 112 |
|
|
MODULE_PARM(audiomux,"1-5i");
|
| 113 |
|
|
|
| 114 |
|
|
/* kernel args */
|
| 115 |
|
|
#ifndef MODULE
|
| 116 |
|
|
static int __init p_card(char *str) { return bttv_parse(str,BTTV_MAX,card); }
|
| 117 |
|
|
static int __init p_pll(char *str) { return bttv_parse(str,BTTV_MAX,pll); }
|
| 118 |
|
|
static int __init p_tuner(char *str) { return bttv_parse(str,BTTV_MAX,tuner); }
|
| 119 |
|
|
__setup("bttv.card=", p_card);
|
| 120 |
|
|
__setup("bttv.pll=", p_pll);
|
| 121 |
|
|
__setup("bttv.tuner=", p_tuner);
|
| 122 |
|
|
|
| 123 |
|
|
int __init bttv_parse(char *str, int max, int *vals)
|
| 124 |
|
|
{
|
| 125 |
|
|
int i,number,res = 2;
|
| 126 |
|
|
|
| 127 |
|
|
for (i = 0; res == 2 && i < max; i++) {
|
| 128 |
|
|
res = get_option(&str,&number);
|
| 129 |
|
|
if (res)
|
| 130 |
|
|
vals[i] = number;
|
| 131 |
|
|
}
|
| 132 |
|
|
return 1;
|
| 133 |
|
|
}
|
| 134 |
|
|
#endif
|
| 135 |
|
|
|
| 136 |
|
|
/* ----------------------------------------------------------------------- */
|
| 137 |
|
|
/* list of card IDs for bt878+ cards */
|
| 138 |
|
|
|
| 139 |
|
|
static struct CARD {
|
| 140 |
|
|
unsigned id;
|
| 141 |
|
|
int cardnr;
|
| 142 |
|
|
char *name;
|
| 143 |
|
|
} cards[] __devinitdata = {
|
| 144 |
|
|
{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
|
| 145 |
|
|
{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
|
| 146 |
|
|
{ 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
|
| 147 |
|
|
{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
|
| 148 |
|
|
{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
|
| 149 |
|
|
{ 0xff020070, BTTV_OSPREY500, "Osprey-500" },
|
| 150 |
|
|
{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
|
| 151 |
|
|
{ 0xff040070, BTTV_OSPREY540, "Osprey-540" },
|
| 152 |
|
|
|
| 153 |
|
|
{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
|
| 154 |
|
|
{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
|
| 155 |
|
|
|
| 156 |
|
|
{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
|
| 157 |
|
|
{ 0x6607107d, BTTV_WINFAST2000, "Leadtek WinFast VC 100" },
|
| 158 |
|
|
{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
|
| 159 |
|
|
{ 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
|
| 160 |
|
|
{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
|
| 161 |
|
|
{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
|
| 162 |
|
|
{ 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
|
| 163 |
|
|
|
| 164 |
|
|
{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
|
| 165 |
|
|
{ 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
|
| 166 |
|
|
// some cards ship with byteswapped IDs ...
|
| 167 |
|
|
{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
|
| 168 |
|
|
{ 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
|
| 169 |
|
|
|
| 170 |
|
|
{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
|
| 171 |
|
|
{ 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
|
| 172 |
|
|
|
| 173 |
|
|
{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
|
| 174 |
|
|
{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
|
| 175 |
|
|
{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
|
| 176 |
|
|
{ 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
|
| 177 |
|
|
|
| 178 |
|
|
{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
|
| 179 |
|
|
{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
|
| 180 |
|
|
{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
|
| 181 |
|
|
{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
|
| 182 |
|
|
{ 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
|
| 183 |
|
|
|
| 184 |
|
|
{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
|
| 185 |
|
|
{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
|
| 186 |
|
|
|
| 187 |
|
|
{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
|
| 188 |
|
|
{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
|
| 189 |
|
|
{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
|
| 190 |
|
|
{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
|
| 191 |
|
|
|
| 192 |
|
|
{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
|
| 193 |
|
|
{ 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
|
| 194 |
|
|
// clashes with FlyVideo
|
| 195 |
|
|
//{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
|
| 196 |
|
|
{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
|
| 197 |
|
|
{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
|
| 198 |
|
|
{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
|
| 199 |
|
|
|
| 200 |
|
|
{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
|
| 201 |
|
|
{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
|
| 202 |
|
|
{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
| 203 |
|
|
{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
| 204 |
|
|
{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
| 205 |
|
|
|
| 206 |
|
|
{ 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
|
| 207 |
|
|
{ 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
|
| 208 |
|
|
{ 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
|
| 209 |
|
|
{ 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
|
| 210 |
|
|
|
| 211 |
|
|
{ 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
|
| 212 |
|
|
{ 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
|
| 213 |
|
|
{ 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
|
| 214 |
|
|
{ 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
|
| 215 |
|
|
|
| 216 |
|
|
{ 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
|
| 217 |
|
|
{ 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
|
| 218 |
|
|
{ 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
|
| 219 |
|
|
{ 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
|
| 220 |
|
|
|
| 221 |
|
|
{ 0xa1550000, BTTV_IVC200, "IVC-200" },
|
| 222 |
|
|
{ 0xa1550001, BTTV_IVC200, "IVC-200" },
|
| 223 |
|
|
{ 0xa1550002, BTTV_IVC200, "IVC-200" },
|
| 224 |
|
|
{ 0xa1550003, BTTV_IVC200, "IVC-200" },
|
| 225 |
|
|
{ 0xa1550100, BTTV_IVC200, "IVC-200G" },
|
| 226 |
|
|
{ 0xa1550101, BTTV_IVC200, "IVC-200G" },
|
| 227 |
|
|
{ 0xa1550102, BTTV_IVC200, "IVC-200G" },
|
| 228 |
|
|
{ 0xa1550103, BTTV_IVC200, "IVC-200G" },
|
| 229 |
|
|
|
| 230 |
|
|
{ 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
|
| 231 |
|
|
{ 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
|
| 232 |
|
|
|
| 233 |
|
|
{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
|
| 234 |
|
|
{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
|
| 235 |
|
|
{ 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
|
| 236 |
|
|
{ 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
|
| 237 |
|
|
{ 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
|
| 238 |
|
|
{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
|
| 239 |
|
|
{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
|
| 240 |
|
|
{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
|
| 241 |
|
|
{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
|
| 242 |
|
|
{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
|
| 243 |
|
|
{ 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
|
| 244 |
|
|
|
| 245 |
|
|
// likely broken, vendor id doesn't match the other magic views ...
|
| 246 |
|
|
//{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
|
| 247 |
|
|
|
| 248 |
|
|
{ 0, -1, NULL }
|
| 249 |
|
|
};
|
| 250 |
|
|
|
| 251 |
|
|
/* ----------------------------------------------------------------------- */
|
| 252 |
|
|
/* array with description for bt848 / bt878 tv/grabber cards */
|
| 253 |
|
|
|
| 254 |
|
|
struct tvcard bttv_tvcards[] = {
|
| 255 |
|
|
{
|
| 256 |
|
|
/* ---- card 0x00 ---------------------------------- */
|
| 257 |
|
|
.name = " *** UNKNOWN/GENERIC *** ",
|
| 258 |
|
|
.video_inputs = 4,
|
| 259 |
|
|
.audio_inputs = 1,
|
| 260 |
|
|
.tuner = 0,
|
| 261 |
|
|
.svhs = 2,
|
| 262 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 263 |
|
|
.tuner_type = -1,
|
| 264 |
|
|
},{
|
| 265 |
|
|
.name = "MIRO PCTV",
|
| 266 |
|
|
.video_inputs = 4,
|
| 267 |
|
|
.audio_inputs = 1,
|
| 268 |
|
|
.tuner = 0,
|
| 269 |
|
|
.svhs = 2,
|
| 270 |
|
|
.gpiomask = 15,
|
| 271 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 272 |
|
|
.audiomux = { 2, 0, 0, 0, 10},
|
| 273 |
|
|
.needs_tvaudio = 1,
|
| 274 |
|
|
.tuner_type = -1,
|
| 275 |
|
|
},{
|
| 276 |
|
|
.name = "Hauppauge (bt848)",
|
| 277 |
|
|
.video_inputs = 4,
|
| 278 |
|
|
.audio_inputs = 1,
|
| 279 |
|
|
.tuner = 0,
|
| 280 |
|
|
.svhs = 2,
|
| 281 |
|
|
.gpiomask = 7,
|
| 282 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 283 |
|
|
.audiomux = { 0, 1, 2, 3, 4},
|
| 284 |
|
|
.needs_tvaudio = 1,
|
| 285 |
|
|
.tuner_type = -1,
|
| 286 |
|
|
},{
|
| 287 |
|
|
.name = "STB, Gateway P/N 6000699 (bt848)",
|
| 288 |
|
|
.video_inputs = 3,
|
| 289 |
|
|
.audio_inputs = 1,
|
| 290 |
|
|
.tuner = 0,
|
| 291 |
|
|
.svhs = 2,
|
| 292 |
|
|
.gpiomask = 7,
|
| 293 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 294 |
|
|
.audiomux = { 4, 0, 2, 3, 1},
|
| 295 |
|
|
.no_msp34xx = 1,
|
| 296 |
|
|
.needs_tvaudio = 1,
|
| 297 |
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
| 298 |
|
|
.pll = PLL_28,
|
| 299 |
|
|
.has_radio = 1,
|
| 300 |
|
|
},{
|
| 301 |
|
|
|
| 302 |
|
|
/* ---- card 0x04 ---------------------------------- */
|
| 303 |
|
|
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
|
| 304 |
|
|
.video_inputs = 4,
|
| 305 |
|
|
.audio_inputs = 0,
|
| 306 |
|
|
.tuner = -1,
|
| 307 |
|
|
.svhs = 2,
|
| 308 |
|
|
.gpiomask = 0,
|
| 309 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 310 |
|
|
.audiomux = { 0 },
|
| 311 |
|
|
.needs_tvaudio = 0,
|
| 312 |
|
|
.tuner_type = 4,
|
| 313 |
|
|
},{
|
| 314 |
|
|
.name = "Diamond DTV2000",
|
| 315 |
|
|
.video_inputs = 4,
|
| 316 |
|
|
.audio_inputs = 1,
|
| 317 |
|
|
.tuner = 0,
|
| 318 |
|
|
.svhs = 2,
|
| 319 |
|
|
.gpiomask = 3,
|
| 320 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 321 |
|
|
.audiomux = { 0, 1, 0, 1, 3},
|
| 322 |
|
|
.needs_tvaudio = 1,
|
| 323 |
|
|
.tuner_type = -1,
|
| 324 |
|
|
},{
|
| 325 |
|
|
.name = "AVerMedia TVPhone",
|
| 326 |
|
|
.video_inputs = 3,
|
| 327 |
|
|
.audio_inputs = 1,
|
| 328 |
|
|
.tuner = 0,
|
| 329 |
|
|
.svhs = 3,
|
| 330 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 331 |
|
|
.gpiomask = 0x0f,
|
| 332 |
|
|
.audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
|
| 333 |
|
|
/* 0x04 for some cards ?? */
|
| 334 |
|
|
.needs_tvaudio = 1,
|
| 335 |
|
|
.tuner_type = -1,
|
| 336 |
|
|
.audio_hook = avermedia_tvphone_audio,
|
| 337 |
|
|
},{
|
| 338 |
|
|
.name = "MATRIX-Vision MV-Delta",
|
| 339 |
|
|
.video_inputs = 5,
|
| 340 |
|
|
.audio_inputs = 1,
|
| 341 |
|
|
.tuner = -1,
|
| 342 |
|
|
.svhs = 3,
|
| 343 |
|
|
.gpiomask = 0,
|
| 344 |
|
|
.muxsel = { 2, 3, 1, 0, 0},
|
| 345 |
|
|
.audiomux = {0 },
|
| 346 |
|
|
.needs_tvaudio = 1,
|
| 347 |
|
|
.tuner_type = -1,
|
| 348 |
|
|
},{
|
| 349 |
|
|
|
| 350 |
|
|
/* ---- card 0x08 ---------------------------------- */
|
| 351 |
|
|
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
|
| 352 |
|
|
.video_inputs = 4,
|
| 353 |
|
|
.audio_inputs = 1,
|
| 354 |
|
|
.tuner = 0,
|
| 355 |
|
|
.svhs = 2,
|
| 356 |
|
|
.gpiomask = 0xc00,
|
| 357 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 358 |
|
|
.audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
|
| 359 |
|
|
.needs_tvaudio = 1,
|
| 360 |
|
|
.pll = PLL_28,
|
| 361 |
|
|
.tuner_type = -1,
|
| 362 |
|
|
},{
|
| 363 |
|
|
.name = "IMS/IXmicro TurboTV",
|
| 364 |
|
|
.video_inputs = 3,
|
| 365 |
|
|
.audio_inputs = 1,
|
| 366 |
|
|
.tuner = 0,
|
| 367 |
|
|
.svhs = 2,
|
| 368 |
|
|
.gpiomask = 3,
|
| 369 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 370 |
|
|
.audiomux = { 1, 1, 2, 3, 0},
|
| 371 |
|
|
.needs_tvaudio = 0,
|
| 372 |
|
|
.pll = PLL_28,
|
| 373 |
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
| 374 |
|
|
},{
|
| 375 |
|
|
.name = "Hauppauge (bt878)",
|
| 376 |
|
|
.video_inputs = 4,
|
| 377 |
|
|
.audio_inputs = 1,
|
| 378 |
|
|
.tuner = 0,
|
| 379 |
|
|
.svhs = 2,
|
| 380 |
|
|
.gpiomask = 0x0f, /* old: 7 */
|
| 381 |
|
|
.muxsel = { 2, 0, 1, 1},
|
| 382 |
|
|
.audiomux = { 0, 1, 2, 3, 4},
|
| 383 |
|
|
.needs_tvaudio = 1,
|
| 384 |
|
|
.pll = PLL_28,
|
| 385 |
|
|
.tuner_type = -1,
|
| 386 |
|
|
},{
|
| 387 |
|
|
.name = "MIRO PCTV pro",
|
| 388 |
|
|
.video_inputs = 3,
|
| 389 |
|
|
.audio_inputs = 1,
|
| 390 |
|
|
.tuner = 0,
|
| 391 |
|
|
.svhs = 2,
|
| 392 |
|
|
.gpiomask = 0x3014f,
|
| 393 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 394 |
|
|
.audiomux = { 0x20001,0x10001, 0, 0,10},
|
| 395 |
|
|
.needs_tvaudio = 1,
|
| 396 |
|
|
.tuner_type = -1,
|
| 397 |
|
|
},{
|
| 398 |
|
|
|
| 399 |
|
|
/* ---- card 0x0c ---------------------------------- */
|
| 400 |
|
|
.name = "ADS Technologies Channel Surfer TV (bt848)",
|
| 401 |
|
|
.video_inputs = 3,
|
| 402 |
|
|
.audio_inputs = 1,
|
| 403 |
|
|
.tuner = 0,
|
| 404 |
|
|
.svhs = 2,
|
| 405 |
|
|
.gpiomask = 15,
|
| 406 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 407 |
|
|
.audiomux = { 13, 14, 11, 7, 0, 0},
|
| 408 |
|
|
.needs_tvaudio = 1,
|
| 409 |
|
|
.tuner_type = -1,
|
| 410 |
|
|
},{
|
| 411 |
|
|
.name = "AVerMedia TVCapture 98",
|
| 412 |
|
|
.video_inputs = 3,
|
| 413 |
|
|
.audio_inputs = 4,
|
| 414 |
|
|
.tuner = 0,
|
| 415 |
|
|
.svhs = 2,
|
| 416 |
|
|
.gpiomask = 15,
|
| 417 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 418 |
|
|
.audiomux = { 13, 14, 11, 7, 0, 0},
|
| 419 |
|
|
.needs_tvaudio = 1,
|
| 420 |
|
|
.msp34xx_alt = 1,
|
| 421 |
|
|
.pll = PLL_28,
|
| 422 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 423 |
|
|
},{
|
| 424 |
|
|
.name = "Aimslab Video Highway Xtreme (VHX)",
|
| 425 |
|
|
.video_inputs = 3,
|
| 426 |
|
|
.audio_inputs = 1,
|
| 427 |
|
|
.tuner = 0,
|
| 428 |
|
|
.svhs = 2,
|
| 429 |
|
|
.gpiomask = 7,
|
| 430 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 431 |
|
|
.audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
|
| 432 |
|
|
.needs_tvaudio = 1,
|
| 433 |
|
|
.pll = PLL_28,
|
| 434 |
|
|
.tuner_type = -1,
|
| 435 |
|
|
},{
|
| 436 |
|
|
.name = "Zoltrix TV-Max",
|
| 437 |
|
|
.video_inputs = 3,
|
| 438 |
|
|
.audio_inputs = 1,
|
| 439 |
|
|
.tuner = 0,
|
| 440 |
|
|
.svhs = 2,
|
| 441 |
|
|
.gpiomask = 15,
|
| 442 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 443 |
|
|
.audiomux = {0 , 0, 1 , 0, 10},
|
| 444 |
|
|
.needs_tvaudio = 1,
|
| 445 |
|
|
.tuner_type = -1,
|
| 446 |
|
|
},{
|
| 447 |
|
|
|
| 448 |
|
|
/* ---- card 0x10 ---------------------------------- */
|
| 449 |
|
|
.name = "Prolink Pixelview PlayTV (bt878)",
|
| 450 |
|
|
.video_inputs = 3,
|
| 451 |
|
|
.audio_inputs = 1,
|
| 452 |
|
|
.tuner = 0,
|
| 453 |
|
|
.svhs = 2,
|
| 454 |
|
|
.gpiomask = 0x01fe00,
|
| 455 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 456 |
|
|
.audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
|
| 457 |
|
|
.needs_tvaudio = 1,
|
| 458 |
|
|
.pll = PLL_28,
|
| 459 |
|
|
.tuner_type = -1,
|
| 460 |
|
|
},{
|
| 461 |
|
|
.name = "Leadtek WinView 601",
|
| 462 |
|
|
.video_inputs = 3,
|
| 463 |
|
|
.audio_inputs = 1,
|
| 464 |
|
|
.tuner = 0,
|
| 465 |
|
|
.svhs = 2,
|
| 466 |
|
|
.gpiomask = 0x8300f8,
|
| 467 |
|
|
.muxsel = { 2, 3, 1, 1,0},
|
| 468 |
|
|
.audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
|
| 469 |
|
|
.needs_tvaudio = 1,
|
| 470 |
|
|
.tuner_type = -1,
|
| 471 |
|
|
.audio_hook = winview_audio,
|
| 472 |
|
|
.has_radio = 1,
|
| 473 |
|
|
},{
|
| 474 |
|
|
.name = "AVEC Intercapture",
|
| 475 |
|
|
.video_inputs = 3,
|
| 476 |
|
|
.audio_inputs = 2,
|
| 477 |
|
|
.tuner = 0,
|
| 478 |
|
|
.svhs = 2,
|
| 479 |
|
|
.gpiomask = 0,
|
| 480 |
|
|
.muxsel = {2, 3, 1, 1},
|
| 481 |
|
|
.audiomux = {1, 0, 0, 0, 0},
|
| 482 |
|
|
.needs_tvaudio = 1,
|
| 483 |
|
|
.tuner_type = -1,
|
| 484 |
|
|
},{
|
| 485 |
|
|
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
|
| 486 |
|
|
.video_inputs = 4,
|
| 487 |
|
|
.audio_inputs = 1,
|
| 488 |
|
|
.tuner = -1,
|
| 489 |
|
|
.svhs = -1,
|
| 490 |
|
|
.gpiomask = 0x8dff00,
|
| 491 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 492 |
|
|
.audiomux = { 0 },
|
| 493 |
|
|
.no_msp34xx = 1,
|
| 494 |
|
|
.tuner_type = -1,
|
| 495 |
|
|
},{
|
| 496 |
|
|
|
| 497 |
|
|
/* ---- card 0x14 ---------------------------------- */
|
| 498 |
|
|
.name = "CEI Raffles Card",
|
| 499 |
|
|
.video_inputs = 3,
|
| 500 |
|
|
.audio_inputs = 3,
|
| 501 |
|
|
.tuner = 0,
|
| 502 |
|
|
.svhs = 2,
|
| 503 |
|
|
.muxsel = {2, 3, 1, 1},
|
| 504 |
|
|
.tuner_type = -1,
|
| 505 |
|
|
},{
|
| 506 |
|
|
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
|
| 507 |
|
|
.video_inputs = 4,
|
| 508 |
|
|
.audio_inputs = 2, // tuner, line in
|
| 509 |
|
|
.tuner = 0,
|
| 510 |
|
|
.svhs = 2,
|
| 511 |
|
|
.gpiomask = 0x1800,
|
| 512 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 513 |
|
|
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
|
| 514 |
|
|
.pll = PLL_28,
|
| 515 |
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
| 516 |
|
|
},{
|
| 517 |
|
|
.name = "Askey CPH050/ Phoebe Tv Master + FM",
|
| 518 |
|
|
.video_inputs = 3,
|
| 519 |
|
|
.audio_inputs = 1,
|
| 520 |
|
|
.tuner = 0,
|
| 521 |
|
|
.svhs = 2,
|
| 522 |
|
|
.gpiomask = 0xc00,
|
| 523 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 524 |
|
|
.audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
|
| 525 |
|
|
.needs_tvaudio = 1,
|
| 526 |
|
|
.pll = PLL_28,
|
| 527 |
|
|
.tuner_type = -1,
|
| 528 |
|
|
},{
|
| 529 |
|
|
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
|
| 530 |
|
|
.video_inputs = 3,
|
| 531 |
|
|
.audio_inputs = 1,
|
| 532 |
|
|
.tuner = 0,
|
| 533 |
|
|
.svhs = -1,
|
| 534 |
|
|
.gpiomask = 7,
|
| 535 |
|
|
.muxsel = { 2, 3, -1 },
|
| 536 |
|
|
.digital_mode = DIGITAL_MODE_CAMERA,
|
| 537 |
|
|
.audiomux = { 0, 0, 0, 0, 0 },
|
| 538 |
|
|
.no_msp34xx = 1,
|
| 539 |
|
|
.pll = PLL_28,
|
| 540 |
|
|
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
|
| 541 |
|
|
},{
|
| 542 |
|
|
|
| 543 |
|
|
/* ---- card 0x18 ---------------------------------- */
|
| 544 |
|
|
.name = "Askey CPH05X/06X (bt878) [many vendors]",
|
| 545 |
|
|
.video_inputs = 3,
|
| 546 |
|
|
.audio_inputs = 1,
|
| 547 |
|
|
.tuner = 0,
|
| 548 |
|
|
.svhs = 2,
|
| 549 |
|
|
.gpiomask = 0xe00,
|
| 550 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 551 |
|
|
.audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
|
| 552 |
|
|
.needs_tvaudio = 1,
|
| 553 |
|
|
.pll = PLL_28,
|
| 554 |
|
|
.tuner_type = -1,
|
| 555 |
|
|
},{
|
| 556 |
|
|
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
|
| 557 |
|
|
.video_inputs = 3,
|
| 558 |
|
|
.audio_inputs = 1,
|
| 559 |
|
|
.tuner = 0,
|
| 560 |
|
|
.svhs = 2,
|
| 561 |
|
|
.gpiomask = 0x1f0fff,
|
| 562 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 563 |
|
|
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
|
| 564 |
|
|
.needs_tvaudio = 0,
|
| 565 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 566 |
|
|
.audio_hook = terratv_audio,
|
| 567 |
|
|
},{
|
| 568 |
|
|
.name = "Hauppauge WinCam newer (bt878)",
|
| 569 |
|
|
.video_inputs = 4,
|
| 570 |
|
|
.audio_inputs = 1,
|
| 571 |
|
|
.tuner = 0,
|
| 572 |
|
|
.svhs = 3,
|
| 573 |
|
|
.gpiomask = 7,
|
| 574 |
|
|
.muxsel = { 2, 0, 1, 1},
|
| 575 |
|
|
.audiomux = { 0, 1, 2, 3, 4},
|
| 576 |
|
|
.needs_tvaudio = 1,
|
| 577 |
|
|
.tuner_type = -1,
|
| 578 |
|
|
},{
|
| 579 |
|
|
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
|
| 580 |
|
|
.video_inputs = 4,
|
| 581 |
|
|
.audio_inputs = 2,
|
| 582 |
|
|
.tuner = 0,
|
| 583 |
|
|
.svhs = 2,
|
| 584 |
|
|
.gpiomask = 0x1800,
|
| 585 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 586 |
|
|
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
|
| 587 |
|
|
.pll = PLL_28,
|
| 588 |
|
|
.tuner_type = TUNER_PHILIPS_SECAM,
|
| 589 |
|
|
},{
|
| 590 |
|
|
|
| 591 |
|
|
/* ---- card 0x1c ---------------------------------- */
|
| 592 |
|
|
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
|
| 593 |
|
|
.video_inputs = 3,
|
| 594 |
|
|
.audio_inputs = 1,
|
| 595 |
|
|
.tuner = 0,
|
| 596 |
|
|
.svhs = 2,
|
| 597 |
|
|
.gpiomask = 0x1f0fff,
|
| 598 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 599 |
|
|
.audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
|
| 600 |
|
|
.needs_tvaudio = 0,
|
| 601 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 602 |
|
|
.audio_hook = terratv_audio,
|
| 603 |
|
|
/* GPIO wiring:
|
| 604 |
|
|
External 20 pin connector (for Active Radio Upgrade board)
|
| 605 |
|
|
gpio00: i2c-sda
|
| 606 |
|
|
gpio01: i2c-scl
|
| 607 |
|
|
gpio02: om5610-data
|
| 608 |
|
|
gpio03: om5610-clk
|
| 609 |
|
|
gpio04: om5610-wre
|
| 610 |
|
|
gpio05: om5610-stereo
|
| 611 |
|
|
gpio06: rds6588-davn
|
| 612 |
|
|
gpio07: Pin 7 n.c.
|
| 613 |
|
|
gpio08: nIOW
|
| 614 |
|
|
gpio09+10: nIOR, nSEL ?? (bt878)
|
| 615 |
|
|
gpio09: nIOR (bt848)
|
| 616 |
|
|
gpio10: nSEL (bt848)
|
| 617 |
|
|
Sound Routing:
|
| 618 |
|
|
gpio16: u2-A0 (1st 4052bt)
|
| 619 |
|
|
gpio17: u2-A1
|
| 620 |
|
|
gpio18: u2-nEN
|
| 621 |
|
|
gpio19: u4-A0 (2nd 4052)
|
| 622 |
|
|
gpio20: u4-A1
|
| 623 |
|
|
u4-nEN - GND
|
| 624 |
|
|
Btspy:
|
| 625 |
|
|
00000 : Cdrom (internal audio input)
|
| 626 |
|
|
10000 : ext. Video audio input
|
| 627 |
|
|
20000 : TV Mono
|
| 628 |
|
|
a0000 : TV Mono/2
|
| 629 |
|
|
1a0000 : TV Stereo
|
| 630 |
|
|
30000 : Radio
|
| 631 |
|
|
40000 : Mute
|
| 632 |
|
|
*/
|
| 633 |
|
|
|
| 634 |
|
|
},{
|
| 635 |
|
|
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
|
| 636 |
|
|
.name = "Imagenation PXC200",
|
| 637 |
|
|
.video_inputs = 5,
|
| 638 |
|
|
.audio_inputs = 1,
|
| 639 |
|
|
.tuner = -1,
|
| 640 |
|
|
.svhs = 1, /* was: 4 */
|
| 641 |
|
|
.gpiomask = 0,
|
| 642 |
|
|
.muxsel = { 2, 3, 1, 0, 0},
|
| 643 |
|
|
.audiomux = { 0 },
|
| 644 |
|
|
.needs_tvaudio = 1,
|
| 645 |
|
|
.tuner_type = -1,
|
| 646 |
|
|
},{
|
| 647 |
|
|
.name = "Lifeview FlyVideo 98 LR50",
|
| 648 |
|
|
.video_inputs = 4,
|
| 649 |
|
|
.audio_inputs = 1,
|
| 650 |
|
|
.tuner = 0,
|
| 651 |
|
|
.svhs = 2,
|
| 652 |
|
|
.gpiomask = 0x1800, //0x8dfe00
|
| 653 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 654 |
|
|
.audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
|
| 655 |
|
|
.pll = PLL_28,
|
| 656 |
|
|
.tuner_type = -1,
|
| 657 |
|
|
},{
|
| 658 |
|
|
.name = "Formac iProTV, Formac ProTV I (bt848)",
|
| 659 |
|
|
.video_inputs = 4,
|
| 660 |
|
|
.audio_inputs = 1,
|
| 661 |
|
|
.tuner = 0,
|
| 662 |
|
|
.svhs = 3,
|
| 663 |
|
|
.gpiomask = 1,
|
| 664 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 665 |
|
|
.audiomux = { 1, 0, 0, 0, 0 },
|
| 666 |
|
|
.pll = PLL_28,
|
| 667 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 668 |
|
|
},{
|
| 669 |
|
|
|
| 670 |
|
|
/* ---- card 0x20 ---------------------------------- */
|
| 671 |
|
|
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
|
| 672 |
|
|
.video_inputs = 4,
|
| 673 |
|
|
.audio_inputs = 0,
|
| 674 |
|
|
.tuner = -1,
|
| 675 |
|
|
.svhs = 2,
|
| 676 |
|
|
.gpiomask = 0,
|
| 677 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 678 |
|
|
.audiomux = { 0 },
|
| 679 |
|
|
.needs_tvaudio = 0,
|
| 680 |
|
|
.tuner_type = 4,
|
| 681 |
|
|
},{
|
| 682 |
|
|
.name = "Terratec TerraTValue Version Bt878",
|
| 683 |
|
|
.video_inputs = 3,
|
| 684 |
|
|
.audio_inputs = 1,
|
| 685 |
|
|
.tuner = 0,
|
| 686 |
|
|
.svhs = 2,
|
| 687 |
|
|
.gpiomask = 0xffff00,
|
| 688 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 689 |
|
|
.audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
|
| 690 |
|
|
.needs_tvaudio = 1,
|
| 691 |
|
|
.pll = PLL_28,
|
| 692 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 693 |
|
|
},{
|
| 694 |
|
|
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
|
| 695 |
|
|
.video_inputs = 4,
|
| 696 |
|
|
.audio_inputs = 1,
|
| 697 |
|
|
.tuner = 0,
|
| 698 |
|
|
.svhs = 2,
|
| 699 |
|
|
.gpiomask = 0xc33000,
|
| 700 |
|
|
.muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
|
| 701 |
|
|
.audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000},
|
| 702 |
|
|
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
|
| 703 |
|
|
gpio23 -- hef4052:nEnable (0x800000)
|
| 704 |
|
|
gpio12 -- hef4052:A1
|
| 705 |
|
|
gpio13 -- hef4052:A0
|
| 706 |
|
|
0x0000: external audio
|
| 707 |
|
|
0x1000: FM
|
| 708 |
|
|
0x2000: TV
|
| 709 |
|
|
0x3000: n.c.
|
| 710 |
|
|
Note: There exists another variant "Winfast 2000" with tv stereo !?
|
| 711 |
|
|
Note: eeprom only contains FF and pci subsystem id 107d:6606
|
| 712 |
|
|
*/
|
| 713 |
|
|
.needs_tvaudio = 0,
|
| 714 |
|
|
.pll = PLL_28,
|
| 715 |
|
|
.has_radio = 1,
|
| 716 |
|
|
.tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
|
| 717 |
|
|
.audio_hook = winfast2000_audio,
|
| 718 |
|
|
},{
|
| 719 |
|
|
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
|
| 720 |
|
|
.video_inputs = 4,
|
| 721 |
|
|
.audio_inputs = 3,
|
| 722 |
|
|
.tuner = 0,
|
| 723 |
|
|
.svhs = 2,
|
| 724 |
|
|
.gpiomask = 0x1800,
|
| 725 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 726 |
|
|
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
|
| 727 |
|
|
.pll = PLL_28,
|
| 728 |
|
|
.tuner_type = -1,
|
| 729 |
|
|
},{
|
| 730 |
|
|
|
| 731 |
|
|
/* ---- card 0x24 ---------------------------------- */
|
| 732 |
|
|
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
|
| 733 |
|
|
.video_inputs = 4,
|
| 734 |
|
|
.audio_inputs = 3,
|
| 735 |
|
|
.tuner = 0,
|
| 736 |
|
|
.svhs = 2,
|
| 737 |
|
|
.gpiomask = 0x1800,
|
| 738 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 739 |
|
|
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
|
| 740 |
|
|
.pll = PLL_28,
|
| 741 |
|
|
.tuner_type = -1,
|
| 742 |
|
|
.has_radio = 1,
|
| 743 |
|
|
},{
|
| 744 |
|
|
.name = "Prolink PixelView PlayTV pro",
|
| 745 |
|
|
.video_inputs = 3,
|
| 746 |
|
|
.audio_inputs = 1,
|
| 747 |
|
|
.tuner = 0,
|
| 748 |
|
|
.svhs = 2,
|
| 749 |
|
|
.gpiomask = 0xff,
|
| 750 |
|
|
.muxsel = { 2, 3, 1, 1 },
|
| 751 |
|
|
.audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
|
| 752 |
|
|
.no_msp34xx = 1,
|
| 753 |
|
|
.pll = PLL_28,
|
| 754 |
|
|
.tuner_type = -1,
|
| 755 |
|
|
},{
|
| 756 |
|
|
.name = "Askey CPH06X TView99",
|
| 757 |
|
|
.video_inputs = 4,
|
| 758 |
|
|
.audio_inputs = 1,
|
| 759 |
|
|
.tuner = 0,
|
| 760 |
|
|
.svhs = 2,
|
| 761 |
|
|
.gpiomask = 0x551e00,
|
| 762 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 763 |
|
|
.audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
|
| 764 |
|
|
.needs_tvaudio = 1,
|
| 765 |
|
|
.pll = PLL_28,
|
| 766 |
|
|
.tuner_type = 1,
|
| 767 |
|
|
},{
|
| 768 |
|
|
.name = "Pinnacle PCTV Studio/Rave",
|
| 769 |
|
|
.video_inputs = 3,
|
| 770 |
|
|
.audio_inputs = 1,
|
| 771 |
|
|
.tuner = 0,
|
| 772 |
|
|
.svhs = 2,
|
| 773 |
|
|
.gpiomask = 0x03000F,
|
| 774 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 775 |
|
|
.audiomux = { 2, 0, 0, 0, 1},
|
| 776 |
|
|
.needs_tvaudio = 1,
|
| 777 |
|
|
.pll = PLL_28,
|
| 778 |
|
|
.tuner_type = -1,
|
| 779 |
|
|
},{
|
| 780 |
|
|
|
| 781 |
|
|
/* ---- card 0x28 ---------------------------------- */
|
| 782 |
|
|
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
|
| 783 |
|
|
.video_inputs = 3,
|
| 784 |
|
|
.audio_inputs = 1,
|
| 785 |
|
|
.tuner = 0,
|
| 786 |
|
|
.svhs = 2,
|
| 787 |
|
|
.gpiomask = 7,
|
| 788 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 789 |
|
|
.audiomux = { 4, 0, 2, 3, 1},
|
| 790 |
|
|
.no_msp34xx = 1,
|
| 791 |
|
|
.needs_tvaudio = 1,
|
| 792 |
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
| 793 |
|
|
.pll = PLL_28,
|
| 794 |
|
|
.has_radio = 1,
|
| 795 |
|
|
},{
|
| 796 |
|
|
.name = "AVerMedia TVPhone 98",
|
| 797 |
|
|
.video_inputs = 3,
|
| 798 |
|
|
.audio_inputs = 4,
|
| 799 |
|
|
.tuner = 0,
|
| 800 |
|
|
.svhs = 2,
|
| 801 |
|
|
.gpiomask = 15,
|
| 802 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 803 |
|
|
.audiomux = { 13, 4, 11, 7, 0, 0},
|
| 804 |
|
|
.needs_tvaudio = 1,
|
| 805 |
|
|
.pll = PLL_28,
|
| 806 |
|
|
.tuner_type = -1,
|
| 807 |
|
|
.has_radio = 1,
|
| 808 |
|
|
.audio_hook = avermedia_tvphone_audio,
|
| 809 |
|
|
},{
|
| 810 |
|
|
.name = "ProVideo PV951", /* pic16c54 */
|
| 811 |
|
|
.video_inputs = 3,
|
| 812 |
|
|
.audio_inputs = 1,
|
| 813 |
|
|
.tuner = 0,
|
| 814 |
|
|
.svhs = 2,
|
| 815 |
|
|
.gpiomask = 0,
|
| 816 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 817 |
|
|
.audiomux = { 0, 0, 0, 0, 0},
|
| 818 |
|
|
.needs_tvaudio = 1,
|
| 819 |
|
|
.no_msp34xx = 1,
|
| 820 |
|
|
.pll = PLL_28,
|
| 821 |
|
|
.tuner_type = 1,
|
| 822 |
|
|
},{
|
| 823 |
|
|
.name = "Little OnAir TV",
|
| 824 |
|
|
.video_inputs = 3,
|
| 825 |
|
|
.audio_inputs = 1,
|
| 826 |
|
|
.tuner = 0,
|
| 827 |
|
|
.svhs = 2,
|
| 828 |
|
|
.gpiomask = 0xe00b,
|
| 829 |
|
|
.muxsel = {2, 3, 1, 1},
|
| 830 |
|
|
.audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
|
| 831 |
|
|
.no_msp34xx = 1,
|
| 832 |
|
|
.tuner_type = -1,
|
| 833 |
|
|
},{
|
| 834 |
|
|
|
| 835 |
|
|
/* ---- card 0x2c ---------------------------------- */
|
| 836 |
|
|
.name = "Sigma TVII-FM",
|
| 837 |
|
|
.video_inputs = 2,
|
| 838 |
|
|
.audio_inputs = 1,
|
| 839 |
|
|
.tuner = 0,
|
| 840 |
|
|
.svhs = -1,
|
| 841 |
|
|
.gpiomask = 3,
|
| 842 |
|
|
.muxsel = {2, 3, 1, 1},
|
| 843 |
|
|
.audiomux = {1, 1, 0, 2, 3},
|
| 844 |
|
|
.no_msp34xx = 1,
|
| 845 |
|
|
.pll = PLL_NONE,
|
| 846 |
|
|
.tuner_type = -1,
|
| 847 |
|
|
},{
|
| 848 |
|
|
.name = "MATRIX-Vision MV-Delta 2",
|
| 849 |
|
|
.video_inputs = 5,
|
| 850 |
|
|
.audio_inputs = 1,
|
| 851 |
|
|
.tuner = -1,
|
| 852 |
|
|
.svhs = 3,
|
| 853 |
|
|
.gpiomask = 0,
|
| 854 |
|
|
.muxsel = { 2, 3, 1, 0, 0},
|
| 855 |
|
|
.audiomux = {0 },
|
| 856 |
|
|
.no_msp34xx = 1,
|
| 857 |
|
|
.pll = PLL_28,
|
| 858 |
|
|
.tuner_type = -1,
|
| 859 |
|
|
},{
|
| 860 |
|
|
.name = "Zoltrix Genie TV/FM",
|
| 861 |
|
|
.video_inputs = 3,
|
| 862 |
|
|
.audio_inputs = 1,
|
| 863 |
|
|
.tuner = 0,
|
| 864 |
|
|
.svhs = 2,
|
| 865 |
|
|
.gpiomask = 0xbcf03f,
|
| 866 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 867 |
|
|
.audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
|
| 868 |
|
|
.no_msp34xx = 1,
|
| 869 |
|
|
.pll = PLL_28,
|
| 870 |
|
|
.tuner_type = 21,
|
| 871 |
|
|
},{
|
| 872 |
|
|
.name = "Terratec TV/Radio+",
|
| 873 |
|
|
.video_inputs = 3,
|
| 874 |
|
|
.audio_inputs = 1,
|
| 875 |
|
|
.tuner = 0,
|
| 876 |
|
|
.svhs = 2,
|
| 877 |
|
|
.gpiomask = 0x70000,
|
| 878 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 879 |
|
|
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
|
| 880 |
|
|
.needs_tvaudio = 1,
|
| 881 |
|
|
.no_msp34xx = 1,
|
| 882 |
|
|
.pll = PLL_35,
|
| 883 |
|
|
.tuner_type = 1,
|
| 884 |
|
|
.has_radio = 1,
|
| 885 |
|
|
},{
|
| 886 |
|
|
|
| 887 |
|
|
/* ---- card 0x30 ---------------------------------- */
|
| 888 |
|
|
.name = "Askey CPH03x/ Dynalink Magic TView",
|
| 889 |
|
|
.video_inputs = 3,
|
| 890 |
|
|
.audio_inputs = 1,
|
| 891 |
|
|
.tuner = 0,
|
| 892 |
|
|
.svhs = 2,
|
| 893 |
|
|
.gpiomask = 15,
|
| 894 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 895 |
|
|
.audiomux = {2,0,0,0,1},
|
| 896 |
|
|
.needs_tvaudio = 1,
|
| 897 |
|
|
.pll = PLL_28,
|
| 898 |
|
|
.tuner_type = -1,
|
| 899 |
|
|
},{
|
| 900 |
|
|
.name = "IODATA GV-BCTV3/PCI",
|
| 901 |
|
|
.video_inputs = 3,
|
| 902 |
|
|
.audio_inputs = 1,
|
| 903 |
|
|
.tuner = 0,
|
| 904 |
|
|
.svhs = 2,
|
| 905 |
|
|
.gpiomask = 0x010f00,
|
| 906 |
|
|
.muxsel = {2, 3, 0, 0},
|
| 907 |
|
|
.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
|
| 908 |
|
|
.no_msp34xx = 1,
|
| 909 |
|
|
.pll = PLL_28,
|
| 910 |
|
|
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
|
| 911 |
|
|
.audio_hook = gvbctv3pci_audio,
|
| 912 |
|
|
},{
|
| 913 |
|
|
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
|
| 914 |
|
|
.video_inputs = 5,
|
| 915 |
|
|
.audio_inputs = 1,
|
| 916 |
|
|
.tuner = 0,
|
| 917 |
|
|
.svhs = 3,
|
| 918 |
|
|
.gpiomask = 0xAA0000,
|
| 919 |
|
|
.muxsel = { 2,3,1,1,-1 },
|
| 920 |
|
|
.digital_mode = DIGITAL_MODE_CAMERA,
|
| 921 |
|
|
.audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
|
| 922 |
|
|
.no_msp34xx = 1,
|
| 923 |
|
|
.pll = PLL_28,
|
| 924 |
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
| 925 |
|
|
/* GPIO wiring: (different from Rev.4C !)
|
| 926 |
|
|
GPIO17: U4.A0 (first hef4052bt)
|
| 927 |
|
|
GPIO19: U4.A1
|
| 928 |
|
|
GPIO20: U5.A1 (second hef4052bt)
|
| 929 |
|
|
GPIO21: U4.nEN
|
| 930 |
|
|
GPIO22: BT832 Reset Line
|
| 931 |
|
|
GPIO23: A5,A0, U5,nEN
|
| 932 |
|
|
Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
|
| 933 |
|
|
*/
|
| 934 |
|
|
},{
|
| 935 |
|
|
.name = "Eagle Wireless Capricorn2 (bt878A)",
|
| 936 |
|
|
.video_inputs = 4,
|
| 937 |
|
|
.audio_inputs = 1,
|
| 938 |
|
|
.tuner = 0,
|
| 939 |
|
|
.svhs = 2,
|
| 940 |
|
|
.gpiomask = 7,
|
| 941 |
|
|
.muxsel = { 2, 0, 1, 1},
|
| 942 |
|
|
.audiomux = { 0, 1, 2, 3, 4},
|
| 943 |
|
|
.pll = PLL_28,
|
| 944 |
|
|
.tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
|
| 945 |
|
|
},{
|
| 946 |
|
|
|
| 947 |
|
|
/* ---- card 0x34 ---------------------------------- */
|
| 948 |
|
|
/* David Härdeman <david@2gen.com> */
|
| 949 |
|
|
.name = "Pinnacle PCTV Studio Pro",
|
| 950 |
|
|
.video_inputs = 4,
|
| 951 |
|
|
.audio_inputs = 1,
|
| 952 |
|
|
.tuner = 0,
|
| 953 |
|
|
.svhs = 3,
|
| 954 |
|
|
.gpiomask = 0x03000F,
|
| 955 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 956 |
|
|
.audiomux = { 1, 0xd0001, 0, 0, 10},
|
| 957 |
|
|
/* sound path (5 sources):
|
| 958 |
|
|
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
|
| 959 |
|
|
0= ext. Audio IN
|
| 960 |
|
|
1= from MUX2
|
| 961 |
|
|
2= Mono TV sound from Tuner
|
| 962 |
|
|
3= not connected
|
| 963 |
|
|
MUX2 (mask 0x30000):
|
| 964 |
|
|
0,2,3= from MSP34xx
|
| 965 |
|
|
1= FM stereo Radio from Tuner */
|
| 966 |
|
|
.needs_tvaudio = 1,
|
| 967 |
|
|
.pll = PLL_28,
|
| 968 |
|
|
.tuner_type = -1,
|
| 969 |
|
|
},{
|
| 970 |
|
|
/* Claas Langbehn <claas@bigfoot.com>,
|
| 971 |
|
|
Sven Grothklags <sven@upb.de> */
|
| 972 |
|
|
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
|
| 973 |
|
|
.video_inputs = 3,
|
| 974 |
|
|
.audio_inputs = 3,
|
| 975 |
|
|
.tuner = 0,
|
| 976 |
|
|
.svhs = 2,
|
| 977 |
|
|
.gpiomask = 0x1c,
|
| 978 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 979 |
|
|
.audiomux = { 0, 0, 0x10, 8, 4 },
|
| 980 |
|
|
.needs_tvaudio = 1,
|
| 981 |
|
|
.pll = PLL_28,
|
| 982 |
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
| 983 |
|
|
.has_radio = 1,
|
| 984 |
|
|
},{
|
| 985 |
|
|
/* Tim Röstermundt <rosterm@uni-muenster.de>
|
| 986 |
|
|
in de.comp.os.unix.linux.hardware:
|
| 987 |
|
|
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
|
| 988 |
|
|
audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
|
| 989 |
|
|
options tuner type=5 */
|
| 990 |
|
|
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
|
| 991 |
|
|
.video_inputs = 4,
|
| 992 |
|
|
.audio_inputs = 1,
|
| 993 |
|
|
.tuner = 0,
|
| 994 |
|
|
.svhs = 2,
|
| 995 |
|
|
.gpiomask = 0x18e0,
|
| 996 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 997 |
|
|
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
|
| 998 |
|
|
/* For cards with tda9820/tda9821:
|
| 999 |
|
|
0x0000: Tuner normal stereo
|
| 1000 |
|
|
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
|
| 1001 |
|
|
0x0880: Tuner A2 stereo */
|
| 1002 |
|
|
.pll = PLL_28,
|
| 1003 |
|
|
.tuner_type = -1,
|
| 1004 |
|
|
},{
|
| 1005 |
|
|
/* Miguel Angel Alvarez <maacruz@navegalia.com>
|
| 1006 |
|
|
old Easy TV BT848 version (model CPH031) */
|
| 1007 |
|
|
.name = "Askey CPH031/ BESTBUY Easy TV",
|
| 1008 |
|
|
.video_inputs = 4,
|
| 1009 |
|
|
.audio_inputs = 1,
|
| 1010 |
|
|
.tuner = 0,
|
| 1011 |
|
|
.svhs = 2,
|
| 1012 |
|
|
.gpiomask = 0xF,
|
| 1013 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 1014 |
|
|
.audiomux = { 2, 0, 0, 0, 10},
|
| 1015 |
|
|
.needs_tvaudio = 0,
|
| 1016 |
|
|
.pll = PLL_28,
|
| 1017 |
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
| 1018 |
|
|
},{
|
| 1019 |
|
|
|
| 1020 |
|
|
/* ---- card 0x38 ---------------------------------- */
|
| 1021 |
|
|
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
|
| 1022 |
|
|
.name = "Lifeview FlyVideo 98FM LR50",
|
| 1023 |
|
|
.video_inputs = 4,
|
| 1024 |
|
|
.audio_inputs = 3,
|
| 1025 |
|
|
.tuner = 0,
|
| 1026 |
|
|
.svhs = 2,
|
| 1027 |
|
|
.gpiomask = 0x1800,
|
| 1028 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1029 |
|
|
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
|
| 1030 |
|
|
.pll = PLL_28,
|
| 1031 |
|
|
.tuner_type = 5,
|
| 1032 |
|
|
},{
|
| 1033 |
|
|
/* This is the ultimate cheapo capture card
|
| 1034 |
|
|
* just a BT848A on a small PCB!
|
| 1035 |
|
|
* Steve Hosgood <steve@equiinet.com> */
|
| 1036 |
|
|
.name = "GrandTec 'Grand Video Capture' (Bt848)",
|
| 1037 |
|
|
.video_inputs = 2,
|
| 1038 |
|
|
.audio_inputs = 0,
|
| 1039 |
|
|
.tuner = -1,
|
| 1040 |
|
|
.svhs = 1,
|
| 1041 |
|
|
.gpiomask = 0,
|
| 1042 |
|
|
.muxsel = { 3, 1 },
|
| 1043 |
|
|
.audiomux = { 0 },
|
| 1044 |
|
|
.needs_tvaudio = 0,
|
| 1045 |
|
|
.no_msp34xx = 1,
|
| 1046 |
|
|
.pll = PLL_35,
|
| 1047 |
|
|
.tuner_type = -1,
|
| 1048 |
|
|
},{
|
| 1049 |
|
|
/* Daniel Herrington <daniel.herrington@home.com> */
|
| 1050 |
|
|
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
|
| 1051 |
|
|
.video_inputs = 3,
|
| 1052 |
|
|
.audio_inputs = 1,
|
| 1053 |
|
|
.tuner = 0,
|
| 1054 |
|
|
.svhs = 2,
|
| 1055 |
|
|
.gpiomask = 0xe00,
|
| 1056 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1057 |
|
|
.audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
|
| 1058 |
|
|
.needs_tvaudio = 1,
|
| 1059 |
|
|
.pll = PLL_28,
|
| 1060 |
|
|
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
|
| 1061 |
|
|
},{
|
| 1062 |
|
|
/* Matti Mottus <mottus@physic.ut.ee> */
|
| 1063 |
|
|
.name = "Askey CPH03x TV Capturer",
|
| 1064 |
|
|
.video_inputs = 4,
|
| 1065 |
|
|
.audio_inputs = 1,
|
| 1066 |
|
|
.tuner = 0,
|
| 1067 |
|
|
.svhs = 2,
|
| 1068 |
|
|
.gpiomask = 0x03000F,
|
| 1069 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 1070 |
|
|
.audiomux = { 2,0,0,0,1 },
|
| 1071 |
|
|
.pll = PLL_28,
|
| 1072 |
|
|
.tuner_type = 0,
|
| 1073 |
|
|
},{
|
| 1074 |
|
|
|
| 1075 |
|
|
/* ---- card 0x3c ---------------------------------- */
|
| 1076 |
|
|
/* Philip Blundell <philb@gnu.org> */
|
| 1077 |
|
|
.name = "Modular Technology MM100PCTV",
|
| 1078 |
|
|
.video_inputs = 2,
|
| 1079 |
|
|
.audio_inputs = 2,
|
| 1080 |
|
|
.tuner = 0,
|
| 1081 |
|
|
.svhs = -1,
|
| 1082 |
|
|
.gpiomask = 11,
|
| 1083 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1084 |
|
|
.audiomux = { 2, 0, 0, 1, 8},
|
| 1085 |
|
|
.pll = PLL_35,
|
| 1086 |
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
| 1087 |
|
|
|
| 1088 |
|
|
},{
|
| 1089 |
|
|
/* Adrian Cox <adrian@humboldt.co.uk */
|
| 1090 |
|
|
.name = "AG Electronics GMV1",
|
| 1091 |
|
|
.video_inputs = 2,
|
| 1092 |
|
|
.audio_inputs = 0,
|
| 1093 |
|
|
.tuner = -1,
|
| 1094 |
|
|
.svhs = 1,
|
| 1095 |
|
|
.gpiomask = 0xF,
|
| 1096 |
|
|
.muxsel = { 2, 2},
|
| 1097 |
|
|
.audiomux = { },
|
| 1098 |
|
|
.no_msp34xx = 1,
|
| 1099 |
|
|
.needs_tvaudio = 0,
|
| 1100 |
|
|
.pll = PLL_28,
|
| 1101 |
|
|
.tuner_type = -1,
|
| 1102 |
|
|
},{
|
| 1103 |
|
|
/* Miguel Angel Alvarez <maacruz@navegalia.com>
|
| 1104 |
|
|
new Easy TV BT878 version (model CPH061)
|
| 1105 |
|
|
special thanks to Informatica Mieres for providing the card */
|
| 1106 |
|
|
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
|
| 1107 |
|
|
.video_inputs = 3,
|
| 1108 |
|
|
.audio_inputs = 2,
|
| 1109 |
|
|
.tuner = 0,
|
| 1110 |
|
|
.svhs = 2,
|
| 1111 |
|
|
.gpiomask = 0xFF,
|
| 1112 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 1113 |
|
|
.audiomux = { 1, 0, 4, 4, 9},
|
| 1114 |
|
|
.needs_tvaudio = 0,
|
| 1115 |
|
|
.pll = PLL_28,
|
| 1116 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 1117 |
|
|
},{
|
| 1118 |
|
|
/* Lukas Gebauer <geby@volny.cz> */
|
| 1119 |
|
|
.name = "ATI TV-Wonder",
|
| 1120 |
|
|
.video_inputs = 3,
|
| 1121 |
|
|
.audio_inputs = 1,
|
| 1122 |
|
|
.tuner = 0,
|
| 1123 |
|
|
.svhs = 2,
|
| 1124 |
|
|
.gpiomask = 0xf03f,
|
| 1125 |
|
|
.muxsel = { 2, 3, 1, 0 },
|
| 1126 |
|
|
.audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
|
| 1127 |
|
|
.pll = PLL_28,
|
| 1128 |
|
|
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
|
| 1129 |
|
|
},{
|
| 1130 |
|
|
|
| 1131 |
|
|
/* ---- card 0x40 ---------------------------------- */
|
| 1132 |
|
|
/* Lukas Gebauer <geby@volny.cz> */
|
| 1133 |
|
|
.name = "ATI TV-Wonder VE",
|
| 1134 |
|
|
.video_inputs = 2,
|
| 1135 |
|
|
.audio_inputs = 1,
|
| 1136 |
|
|
.tuner = 0,
|
| 1137 |
|
|
.svhs = -1,
|
| 1138 |
|
|
.gpiomask = 1,
|
| 1139 |
|
|
.muxsel = { 2, 3, 0, 1},
|
| 1140 |
|
|
.audiomux = { 0, 0, 1, 0, 0},
|
| 1141 |
|
|
.no_msp34xx = 1,
|
| 1142 |
|
|
.pll = PLL_28,
|
| 1143 |
|
|
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
|
| 1144 |
|
|
},{
|
| 1145 |
|
|
/* DeeJay <deejay@westel900.net (2000S) */
|
| 1146 |
|
|
.name = "Lifeview FlyVideo 2000S LR90",
|
| 1147 |
|
|
.video_inputs = 3,
|
| 1148 |
|
|
.audio_inputs = 3,
|
| 1149 |
|
|
.tuner = 0,
|
| 1150 |
|
|
.svhs = 2,
|
| 1151 |
|
|
.gpiomask = 0x18e0,
|
| 1152 |
|
|
.muxsel = { 2, 3, 0, 1},
|
| 1153 |
|
|
/* Radio changed from 1e80 to 0x800 to make
|
| 1154 |
|
|
FlyVideo2000S in .hu happy (gm)*/
|
| 1155 |
|
|
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
|
| 1156 |
|
|
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
|
| 1157 |
|
|
.audio_hook = fv2000s_audio,
|
| 1158 |
|
|
.no_msp34xx = 1,
|
| 1159 |
|
|
.no_tda9875 = 1,
|
| 1160 |
|
|
.needs_tvaudio = 1,
|
| 1161 |
|
|
.pll = PLL_28,
|
| 1162 |
|
|
.tuner_type = 5,
|
| 1163 |
|
|
},{
|
| 1164 |
|
|
.name = "Terratec TValueRadio",
|
| 1165 |
|
|
.video_inputs = 3,
|
| 1166 |
|
|
.audio_inputs = 1,
|
| 1167 |
|
|
.tuner = 0,
|
| 1168 |
|
|
.svhs = 2,
|
| 1169 |
|
|
.gpiomask = 0xffff00,
|
| 1170 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1171 |
|
|
.audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
|
| 1172 |
|
|
.needs_tvaudio = 1,
|
| 1173 |
|
|
.pll = PLL_28,
|
| 1174 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 1175 |
|
|
.has_radio = 1,
|
| 1176 |
|
|
},{
|
| 1177 |
|
|
/* TANAKA Kei <peg00625@nifty.com> */
|
| 1178 |
|
|
.name = "IODATA GV-BCTV4/PCI",
|
| 1179 |
|
|
.video_inputs = 3,
|
| 1180 |
|
|
.audio_inputs = 1,
|
| 1181 |
|
|
.tuner = 0,
|
| 1182 |
|
|
.svhs = 2,
|
| 1183 |
|
|
.gpiomask = 0x010f00,
|
| 1184 |
|
|
.muxsel = {2, 3, 0, 0},
|
| 1185 |
|
|
.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
|
| 1186 |
|
|
.no_msp34xx = 1,
|
| 1187 |
|
|
.pll = PLL_28,
|
| 1188 |
|
|
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
|
| 1189 |
|
|
.audio_hook = gvbctv3pci_audio,
|
| 1190 |
|
|
},{
|
| 1191 |
|
|
|
| 1192 |
|
|
/* ---- card 0x44 ---------------------------------- */
|
| 1193 |
|
|
.name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
|
| 1194 |
|
|
// try "insmod msp3400 simple=0" if you have
|
| 1195 |
|
|
// sound problems with this card.
|
| 1196 |
|
|
.video_inputs = 4,
|
| 1197 |
|
|
.audio_inputs = 1,
|
| 1198 |
|
|
.tuner = 0,
|
| 1199 |
|
|
.svhs = -1,
|
| 1200 |
|
|
.gpiomask = 0x4f8a00,
|
| 1201 |
|
|
// 0x100000: 1=MSP enabled (0=disable again)
|
| 1202 |
|
|
// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
|
| 1203 |
|
|
.audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
|
| 1204 |
|
|
// tvtuner, radio, external,internal, mute, stereo
|
| 1205 |
|
|
/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
|
| 1206 |
|
|
.muxsel = { 2, 3 ,0 ,1},
|
| 1207 |
|
|
.tuner_type = TUNER_MT2032,
|
| 1208 |
|
|
.pll = PLL_28,
|
| 1209 |
|
|
.has_radio = 1,
|
| 1210 |
|
|
},{
|
| 1211 |
|
|
/* Philip Blundell <pb@nexus.co.uk> */
|
| 1212 |
|
|
.name = "Active Imaging AIMMS",
|
| 1213 |
|
|
.video_inputs = 1,
|
| 1214 |
|
|
.audio_inputs = 0,
|
| 1215 |
|
|
.tuner = -1,
|
| 1216 |
|
|
.tuner_type = -1,
|
| 1217 |
|
|
.pll = PLL_28,
|
| 1218 |
|
|
.muxsel = { 2 },
|
| 1219 |
|
|
.gpiomask = 0
|
| 1220 |
|
|
},{
|
| 1221 |
|
|
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
|
| 1222 |
|
|
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
|
| 1223 |
|
|
.video_inputs = 3,
|
| 1224 |
|
|
.audio_inputs = 4,
|
| 1225 |
|
|
.tuner = 0,
|
| 1226 |
|
|
.svhs = 2,
|
| 1227 |
|
|
.gpiomask = 15,
|
| 1228 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1229 |
|
|
.audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
|
| 1230 |
|
|
.needs_tvaudio = 1,
|
| 1231 |
|
|
.pll = PLL_28,
|
| 1232 |
|
|
.tuner_type = 25,
|
| 1233 |
|
|
/* GPIO wiring:
|
| 1234 |
|
|
GPIO0: U4.A0 (hef4052bt)
|
| 1235 |
|
|
GPIO1: U4.A1
|
| 1236 |
|
|
GPIO2: U4.A1 (second hef4052bt)
|
| 1237 |
|
|
GPIO3: U4.nEN, U5.A0, A5.nEN
|
| 1238 |
|
|
GPIO8-15: vrd866b ?
|
| 1239 |
|
|
*/
|
| 1240 |
|
|
},{
|
| 1241 |
|
|
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
|
| 1242 |
|
|
.video_inputs = 4,
|
| 1243 |
|
|
.audio_inputs = 0,
|
| 1244 |
|
|
.tuner = -1,
|
| 1245 |
|
|
.svhs = 2,
|
| 1246 |
|
|
.muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
|
| 1247 |
|
|
.pll = PLL_28,
|
| 1248 |
|
|
.no_msp34xx = 1,
|
| 1249 |
|
|
},{
|
| 1250 |
|
|
|
| 1251 |
|
|
/* ---- card 0x48 ---------------------------------- */
|
| 1252 |
|
|
/* Dariusz Kowalewski <darekk@automex.pl> */
|
| 1253 |
|
|
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
|
| 1254 |
|
|
.video_inputs = 4,
|
| 1255 |
|
|
.audio_inputs = 1,
|
| 1256 |
|
|
.tuner = 0,
|
| 1257 |
|
|
.svhs = 2,
|
| 1258 |
|
|
.gpiomask = 0x3f,
|
| 1259 |
|
|
.muxsel = { 2, 3, 1, 1 },
|
| 1260 |
|
|
.audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
|
| 1261 |
|
|
.needs_tvaudio = 1,
|
| 1262 |
|
|
.no_msp34xx = 1,
|
| 1263 |
|
|
.no_tda9875 = 1,
|
| 1264 |
|
|
.pll = PLL_28,
|
| 1265 |
|
|
.tuner_type = 5,
|
| 1266 |
|
|
.audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
|
| 1267 |
|
|
.has_radio = 1, // Note: not all cards have radio
|
| 1268 |
|
|
/* GPIO wiring:
|
| 1269 |
|
|
GPIO0: A0 hef4052
|
| 1270 |
|
|
GPIO1: A1 hef4052
|
| 1271 |
|
|
GPIO3: nEN hef4052
|
| 1272 |
|
|
GPIO8-15: vrd866b
|
| 1273 |
|
|
GPIO20,22,23: R30,R29,R28
|
| 1274 |
|
|
*/
|
| 1275 |
|
|
},{
|
| 1276 |
|
|
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
|
| 1277 |
|
|
/* you must jumper JP5 for the card to work */
|
| 1278 |
|
|
.name = "Sensoray 311",
|
| 1279 |
|
|
.video_inputs = 5,
|
| 1280 |
|
|
.audio_inputs = 0,
|
| 1281 |
|
|
.tuner = -1,
|
| 1282 |
|
|
.svhs = 4,
|
| 1283 |
|
|
.gpiomask = 0,
|
| 1284 |
|
|
.muxsel = { 2, 3, 1, 0, 0},
|
| 1285 |
|
|
.audiomux = { 0 },
|
| 1286 |
|
|
.needs_tvaudio = 0,
|
| 1287 |
|
|
.tuner_type = -1,
|
| 1288 |
|
|
},{
|
| 1289 |
|
|
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
|
| 1290 |
|
|
.name = "RemoteVision MX (RV605)",
|
| 1291 |
|
|
.video_inputs = 16,
|
| 1292 |
|
|
.audio_inputs = 0,
|
| 1293 |
|
|
.tuner = -1,
|
| 1294 |
|
|
.svhs = -1,
|
| 1295 |
|
|
.gpiomask = 0x00,
|
| 1296 |
|
|
.gpiomask2 = 0x07ff,
|
| 1297 |
|
|
.muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
|
| 1298 |
|
|
0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
|
| 1299 |
|
|
.no_msp34xx = 1,
|
| 1300 |
|
|
.no_tda9875 = 1,
|
| 1301 |
|
|
.tuner_type = -1,
|
| 1302 |
|
|
.muxsel_hook = rv605_muxsel,
|
| 1303 |
|
|
},{
|
| 1304 |
|
|
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
|
| 1305 |
|
|
.video_inputs = 3,
|
| 1306 |
|
|
.audio_inputs = 2,
|
| 1307 |
|
|
.tuner = 0,
|
| 1308 |
|
|
.svhs = 2,
|
| 1309 |
|
|
.gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
|
| 1310 |
|
|
.muxsel = { 2, 1, 1, },
|
| 1311 |
|
|
.audiomux = { 0, 1, 2, 2, 4 },
|
| 1312 |
|
|
.needs_tvaudio = 0,
|
| 1313 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 1314 |
|
|
.pll = PLL_28,
|
| 1315 |
|
|
.has_radio = 1,
|
| 1316 |
|
|
},{
|
| 1317 |
|
|
|
| 1318 |
|
|
/* ---- card 0x4c ---------------------------------- */
|
| 1319 |
|
|
/* Masaki Suzuki <masaki@btree.org> */
|
| 1320 |
|
|
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
|
| 1321 |
|
|
.video_inputs = 3,
|
| 1322 |
|
|
.audio_inputs = 1,
|
| 1323 |
|
|
.tuner = 0,
|
| 1324 |
|
|
.svhs = 2,
|
| 1325 |
|
|
.gpiomask = 0x140007,
|
| 1326 |
|
|
.muxsel = { 2, 3, 1, 1 },
|
| 1327 |
|
|
.audiomux = { 0, 1, 2, 3, 4, 0 },
|
| 1328 |
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
| 1329 |
|
|
.audio_hook = windvr_audio,
|
| 1330 |
|
|
},{
|
| 1331 |
|
|
.name = "GrandTec Multi Capture Card (Bt878)",
|
| 1332 |
|
|
.video_inputs = 4,
|
| 1333 |
|
|
.audio_inputs = 0,
|
| 1334 |
|
|
.tuner = -1,
|
| 1335 |
|
|
.svhs = -1,
|
| 1336 |
|
|
.gpiomask = 0,
|
| 1337 |
|
|
.muxsel = { 2, 3, 1, 0 },
|
| 1338 |
|
|
.audiomux = { 0 },
|
| 1339 |
|
|
.needs_tvaudio = 0,
|
| 1340 |
|
|
.no_msp34xx = 1,
|
| 1341 |
|
|
.pll = PLL_28,
|
| 1342 |
|
|
.tuner_type = -1,
|
| 1343 |
|
|
},{
|
| 1344 |
|
|
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
|
| 1345 |
|
|
.video_inputs = 4,
|
| 1346 |
|
|
.audio_inputs = 3,
|
| 1347 |
|
|
.tuner = 0,
|
| 1348 |
|
|
.svhs = 2,
|
| 1349 |
|
|
.gpiomask = 7,
|
| 1350 |
|
|
.muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
|
| 1351 |
|
|
.audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
|
| 1352 |
|
|
// This card lacks external Audio In, so we mute it on Ext. & Int.
|
| 1353 |
|
|
// The PCB can take a sbx1637/sbx1673, wiring unknown.
|
| 1354 |
|
|
// This card lacks PCI subsystem ID, sigh.
|
| 1355 |
|
|
// audiomux=1: lower volume, 2+3: mute
|
| 1356 |
|
|
// btwincap uses 0x80000/0x80003
|
| 1357 |
|
|
.needs_tvaudio = 0,
|
| 1358 |
|
|
.no_msp34xx = 1,
|
| 1359 |
|
|
.pll = PLL_28,
|
| 1360 |
|
|
.tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
|
| 1361 |
|
|
// radio signal strength indicators work fine.
|
| 1362 |
|
|
.has_radio = 1,
|
| 1363 |
|
|
/* GPIO Info:
|
| 1364 |
|
|
GPIO0,1: HEF4052 A0,A1
|
| 1365 |
|
|
GPIO2: HEF4052 nENABLE
|
| 1366 |
|
|
GPIO3-7: n.c.
|
| 1367 |
|
|
GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
|
| 1368 |
|
|
GPIO14,15: ??
|
| 1369 |
|
|
GPIO16-21: n.c.
|
| 1370 |
|
|
GPIO22,23: ??
|
| 1371 |
|
|
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
|
| 1372 |
|
|
},{
|
| 1373 |
|
|
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
|
| 1374 |
|
|
.name = "DSP Design TCVIDEO",
|
| 1375 |
|
|
.video_inputs = 4,
|
| 1376 |
|
|
.svhs = -1,
|
| 1377 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 1378 |
|
|
.pll = PLL_28,
|
| 1379 |
|
|
.tuner_type = -1,
|
| 1380 |
|
|
},{
|
| 1381 |
|
|
|
| 1382 |
|
|
/* ---- card 0x50 ---------------------------------- */
|
| 1383 |
|
|
.name = "Hauppauge WinTV PVR",
|
| 1384 |
|
|
.video_inputs = 4,
|
| 1385 |
|
|
.audio_inputs = 1,
|
| 1386 |
|
|
.tuner = 0,
|
| 1387 |
|
|
.svhs = 2,
|
| 1388 |
|
|
.muxsel = { 2, 0, 1, 1},
|
| 1389 |
|
|
.needs_tvaudio = 1,
|
| 1390 |
|
|
.pll = PLL_28,
|
| 1391 |
|
|
.tuner_type = -1,
|
| 1392 |
|
|
|
| 1393 |
|
|
.gpiomask = 7,
|
| 1394 |
|
|
.audiomux = {7},
|
| 1395 |
|
|
},{
|
| 1396 |
|
|
.name = "IODATA GV-BCTV5/PCI",
|
| 1397 |
|
|
.video_inputs = 3,
|
| 1398 |
|
|
.audio_inputs = 1,
|
| 1399 |
|
|
.tuner = 0,
|
| 1400 |
|
|
.svhs = 2,
|
| 1401 |
|
|
.gpiomask = 0x0f0f80,
|
| 1402 |
|
|
.muxsel = {2, 3, 1, 0},
|
| 1403 |
|
|
.audiomux = {0x030000, 0x010000, 0x030000, 0, 0x020000, 0},
|
| 1404 |
|
|
.no_msp34xx = 1,
|
| 1405 |
|
|
.pll = PLL_28,
|
| 1406 |
|
|
.tuner_type = TUNER_PHILIPS_NTSC_M,
|
| 1407 |
|
|
.audio_hook = gvbctv3pci_audio,
|
| 1408 |
|
|
.has_radio = 1,
|
| 1409 |
|
|
},{
|
| 1410 |
|
|
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
|
| 1411 |
|
|
.video_inputs = 4, /* id-inputs-clock */
|
| 1412 |
|
|
.audio_inputs = 0,
|
| 1413 |
|
|
.tuner = -1,
|
| 1414 |
|
|
.svhs = 3,
|
| 1415 |
|
|
.muxsel = { 3, 2, 0, 1 },
|
| 1416 |
|
|
.pll = PLL_28,
|
| 1417 |
|
|
.tuner_type = -1,
|
| 1418 |
|
|
.no_msp34xx = 1,
|
| 1419 |
|
|
.no_tda9875 = 1,
|
| 1420 |
|
|
.no_tda7432 = 1,
|
| 1421 |
|
|
},{
|
| 1422 |
|
|
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
|
| 1423 |
|
|
.video_inputs = 3,
|
| 1424 |
|
|
.audio_inputs = 0,
|
| 1425 |
|
|
.tuner = -1,
|
| 1426 |
|
|
.svhs = 2,
|
| 1427 |
|
|
.muxsel = { 2, 3, 1 },
|
| 1428 |
|
|
.pll = PLL_28,
|
| 1429 |
|
|
.tuner_type = -1,
|
| 1430 |
|
|
.no_msp34xx = 1,
|
| 1431 |
|
|
.no_tda9875 = 1,
|
| 1432 |
|
|
.no_tda7432 = 1,
|
| 1433 |
|
|
},{
|
| 1434 |
|
|
|
| 1435 |
|
|
/* ---- card 0x54 ---------------------------------- */
|
| 1436 |
|
|
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
|
| 1437 |
|
|
.video_inputs = 2,
|
| 1438 |
|
|
.audio_inputs = 0,
|
| 1439 |
|
|
.tuner = -1,
|
| 1440 |
|
|
.svhs = 1,
|
| 1441 |
|
|
.muxsel = { 3, 1 },
|
| 1442 |
|
|
.pll = PLL_28,
|
| 1443 |
|
|
.tuner_type = -1,
|
| 1444 |
|
|
.no_msp34xx = 1,
|
| 1445 |
|
|
.no_tda9875 = 1,
|
| 1446 |
|
|
.no_tda7432 = 1,
|
| 1447 |
|
|
},{
|
| 1448 |
|
|
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
|
| 1449 |
|
|
.video_inputs = 1,
|
| 1450 |
|
|
.audio_inputs = 0,
|
| 1451 |
|
|
.tuner = -1,
|
| 1452 |
|
|
.svhs = -1,
|
| 1453 |
|
|
.muxsel = { 0 },
|
| 1454 |
|
|
.pll = PLL_28,
|
| 1455 |
|
|
.tuner_type = -1,
|
| 1456 |
|
|
.no_msp34xx = 1,
|
| 1457 |
|
|
.no_tda9875 = 1,
|
| 1458 |
|
|
.no_tda7432 = 1,
|
| 1459 |
|
|
},{
|
| 1460 |
|
|
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
|
| 1461 |
|
|
.video_inputs = 2,
|
| 1462 |
|
|
.audio_inputs = 0,
|
| 1463 |
|
|
.tuner = -1,
|
| 1464 |
|
|
.svhs = 1,
|
| 1465 |
|
|
.muxsel = { 0, 1 },
|
| 1466 |
|
|
.pll = PLL_28,
|
| 1467 |
|
|
.tuner_type = -1,
|
| 1468 |
|
|
.no_msp34xx = 1,
|
| 1469 |
|
|
.no_tda9875 = 1,
|
| 1470 |
|
|
.no_tda7432 = 1,
|
| 1471 |
|
|
},{
|
| 1472 |
|
|
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
|
| 1473 |
|
|
.video_inputs = 1,
|
| 1474 |
|
|
.audio_inputs = 1,
|
| 1475 |
|
|
.tuner = -1,
|
| 1476 |
|
|
.svhs = -1,
|
| 1477 |
|
|
.muxsel = { 0 },
|
| 1478 |
|
|
.pll = PLL_28,
|
| 1479 |
|
|
.tuner_type = -1,
|
| 1480 |
|
|
.no_msp34xx = 1,
|
| 1481 |
|
|
.no_tda9875 = 1,
|
| 1482 |
|
|
.no_tda7432 = 1,
|
| 1483 |
|
|
},{
|
| 1484 |
|
|
|
| 1485 |
|
|
/* ---- card 0x58 ---------------------------------- */
|
| 1486 |
|
|
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
|
| 1487 |
|
|
.video_inputs = 2,
|
| 1488 |
|
|
.audio_inputs = 1,
|
| 1489 |
|
|
.tuner = -1,
|
| 1490 |
|
|
.svhs = 1,
|
| 1491 |
|
|
.muxsel = { 0, 1 },
|
| 1492 |
|
|
.pll = PLL_28,
|
| 1493 |
|
|
.tuner_type = -1,
|
| 1494 |
|
|
.no_msp34xx = 1,
|
| 1495 |
|
|
.no_tda9875 = 1,
|
| 1496 |
|
|
.no_tda7432 = 1,
|
| 1497 |
|
|
},{
|
| 1498 |
|
|
.name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
|
| 1499 |
|
|
.video_inputs = 2,
|
| 1500 |
|
|
.audio_inputs = 1,
|
| 1501 |
|
|
.tuner = -1,
|
| 1502 |
|
|
.svhs = 1,
|
| 1503 |
|
|
.muxsel = { 2, 3 },
|
| 1504 |
|
|
.pll = PLL_28,
|
| 1505 |
|
|
.tuner_type = -1,
|
| 1506 |
|
|
.no_msp34xx = 1,
|
| 1507 |
|
|
.no_tda9875 = 1,
|
| 1508 |
|
|
.no_tda7432 = 1,
|
| 1509 |
|
|
},{
|
| 1510 |
|
|
.name = "Osprey 500", /* 500 */
|
| 1511 |
|
|
.video_inputs = 2,
|
| 1512 |
|
|
.audio_inputs = 1,
|
| 1513 |
|
|
.tuner = -1,
|
| 1514 |
|
|
.svhs = 1,
|
| 1515 |
|
|
.muxsel = { 2, 3 },
|
| 1516 |
|
|
.pll = PLL_28,
|
| 1517 |
|
|
.tuner_type = -1,
|
| 1518 |
|
|
.no_msp34xx = 1,
|
| 1519 |
|
|
.no_tda9875 = 1,
|
| 1520 |
|
|
.no_tda7432 = 1,
|
| 1521 |
|
|
},{
|
| 1522 |
|
|
.name = "Osprey 540", /* 540 */
|
| 1523 |
|
|
.video_inputs = 4,
|
| 1524 |
|
|
.audio_inputs = 1,
|
| 1525 |
|
|
.tuner = -1,
|
| 1526 |
|
|
#if 0 /* TODO ... */
|
| 1527 |
|
|
.svhs = OSPREY540_SVID_ANALOG,
|
| 1528 |
|
|
.muxsel = { [OSPREY540_COMP_ANALOG] = 2,
|
| 1529 |
|
|
[OSPREY540_SVID_ANALOG] = 3, },
|
| 1530 |
|
|
#endif
|
| 1531 |
|
|
.pll = PLL_28,
|
| 1532 |
|
|
.tuner_type = -1,
|
| 1533 |
|
|
.no_msp34xx = 1,
|
| 1534 |
|
|
.no_tda9875 = 1,
|
| 1535 |
|
|
.no_tda7432 = 1,
|
| 1536 |
|
|
#if 0 /* TODO ... */
|
| 1537 |
|
|
.muxsel_hook = osprey_540_muxsel,
|
| 1538 |
|
|
.picture_hook = osprey_540_set_picture,
|
| 1539 |
|
|
#endif
|
| 1540 |
|
|
},{
|
| 1541 |
|
|
|
| 1542 |
|
|
/* ---- card 0x5C ---------------------------------- */
|
| 1543 |
|
|
.name = "Osprey 2000", /* 2000 */
|
| 1544 |
|
|
.video_inputs = 2,
|
| 1545 |
|
|
.audio_inputs = 1,
|
| 1546 |
|
|
.tuner = -1,
|
| 1547 |
|
|
.svhs = 1,
|
| 1548 |
|
|
.muxsel = { 2, 3 },
|
| 1549 |
|
|
.pll = PLL_28,
|
| 1550 |
|
|
.tuner_type = -1,
|
| 1551 |
|
|
.no_msp34xx = 1,
|
| 1552 |
|
|
.no_tda9875 = 1,
|
| 1553 |
|
|
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
|
| 1554 |
|
|
},{
|
| 1555 |
|
|
/* M G Berberich <berberic@forwiss.uni-passau.de> */
|
| 1556 |
|
|
.name = "IDS Eagle",
|
| 1557 |
|
|
.video_inputs = 4,
|
| 1558 |
|
|
.audio_inputs = 0,
|
| 1559 |
|
|
.tuner = -1,
|
| 1560 |
|
|
.tuner_type = -1,
|
| 1561 |
|
|
.svhs = -1,
|
| 1562 |
|
|
.gpiomask = 0,
|
| 1563 |
|
|
.muxsel = { 0, 1, 2, 3 },
|
| 1564 |
|
|
.muxsel_hook = eagle_muxsel,
|
| 1565 |
|
|
.no_msp34xx = 1,
|
| 1566 |
|
|
.no_tda9875 = 1,
|
| 1567 |
|
|
.pll = PLL_28,
|
| 1568 |
|
|
},{
|
| 1569 |
|
|
.name = "Pinnacle PCTV Sat",
|
| 1570 |
|
|
.video_inputs = 2,
|
| 1571 |
|
|
.audio_inputs = 0,
|
| 1572 |
|
|
.svhs = 1,
|
| 1573 |
|
|
.tuner = -1,
|
| 1574 |
|
|
.tuner_type = -1,
|
| 1575 |
|
|
.no_msp34xx = 1,
|
| 1576 |
|
|
.no_tda9875 = 1,
|
| 1577 |
|
|
.no_tda7432 = 1,
|
| 1578 |
|
|
.gpiomask = 0x01,
|
| 1579 |
|
|
.audiomux = { 0, 0, 0, 0, 1 },
|
| 1580 |
|
|
.muxsel = { 3, 0, 1, 2},
|
| 1581 |
|
|
.needs_tvaudio = 0,
|
| 1582 |
|
|
.pll = PLL_28,
|
| 1583 |
|
|
},{
|
| 1584 |
|
|
.name = "Formac ProTV II (bt878)",
|
| 1585 |
|
|
.video_inputs = 4,
|
| 1586 |
|
|
.audio_inputs = 1,
|
| 1587 |
|
|
.tuner = 0,
|
| 1588 |
|
|
.svhs = 3,
|
| 1589 |
|
|
.gpiomask = 2,
|
| 1590 |
|
|
// TV, Comp1, Composite over SVID con, SVID
|
| 1591 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1592 |
|
|
.audiomux = { 2, 2, 0, 0, 0 },
|
| 1593 |
|
|
.pll = PLL_28,
|
| 1594 |
|
|
.has_radio = 1,
|
| 1595 |
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
| 1596 |
|
|
/* sound routing:
|
| 1597 |
|
|
GPIO=0x00,0x01,0x03: mute (?)
|
| 1598 |
|
|
0x02: both TV and radio (tuner: FM1216/I)
|
| 1599 |
|
|
The card has onboard audio connectors labeled "cdrom" and "board",
|
| 1600 |
|
|
not soldered here, though unknown wiring.
|
| 1601 |
|
|
Card lacks: external audio in, pci subsystem id.
|
| 1602 |
|
|
*/
|
| 1603 |
|
|
},{
|
| 1604 |
|
|
|
| 1605 |
|
|
/* ---- card 0x60 ---------------------------------- */
|
| 1606 |
|
|
.name = "MachTV",
|
| 1607 |
|
|
.video_inputs = 3,
|
| 1608 |
|
|
.audio_inputs = 1,
|
| 1609 |
|
|
.tuner = 0,
|
| 1610 |
|
|
.svhs = -1,
|
| 1611 |
|
|
.gpiomask = 7,
|
| 1612 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1613 |
|
|
.audiomux = { 0, 1, 2, 3, 4},
|
| 1614 |
|
|
.needs_tvaudio = 1,
|
| 1615 |
|
|
.tuner_type = 5,
|
| 1616 |
|
|
.pll = 1,
|
| 1617 |
|
|
},{
|
| 1618 |
|
|
.name = "Euresys Picolo",
|
| 1619 |
|
|
.video_inputs = 3,
|
| 1620 |
|
|
.audio_inputs = 0,
|
| 1621 |
|
|
.tuner = -1,
|
| 1622 |
|
|
.svhs = 2,
|
| 1623 |
|
|
.gpiomask = 0,
|
| 1624 |
|
|
.no_msp34xx = 1,
|
| 1625 |
|
|
.no_tda9875 = 1,
|
| 1626 |
|
|
.no_tda7432 = 1,
|
| 1627 |
|
|
.muxsel = { 2, 0, 1},
|
| 1628 |
|
|
.pll = PLL_28,
|
| 1629 |
|
|
},{
|
| 1630 |
|
|
/* Luc Van Hoeylandt <luc@e-magic.be> */
|
| 1631 |
|
|
.name = "ProVideo PV150", /* 0x4f */
|
| 1632 |
|
|
.video_inputs = 2,
|
| 1633 |
|
|
.audio_inputs = 0,
|
| 1634 |
|
|
.tuner = -1,
|
| 1635 |
|
|
.svhs = -1,
|
| 1636 |
|
|
.gpiomask = 0,
|
| 1637 |
|
|
.muxsel = { 2, 3 },
|
| 1638 |
|
|
.audiomux = { 0 },
|
| 1639 |
|
|
.needs_tvaudio = 0,
|
| 1640 |
|
|
.no_msp34xx = 1,
|
| 1641 |
|
|
.pll = PLL_28,
|
| 1642 |
|
|
.tuner_type = -1,
|
| 1643 |
|
|
},{
|
| 1644 |
|
|
/* Hiroshi Takekawa <sian@big.or.jp> */
|
| 1645 |
|
|
/* This card lacks subsystem ID */
|
| 1646 |
|
|
.name = "AD-TVK503", /* 0x63 */
|
| 1647 |
|
|
.video_inputs = 4,
|
| 1648 |
|
|
.audio_inputs = 1,
|
| 1649 |
|
|
.tuner = 0,
|
| 1650 |
|
|
.svhs = 2,
|
| 1651 |
|
|
.gpiomask = 0x001e8007,
|
| 1652 |
|
|
.muxsel = { 2, 3, 1, 0 },
|
| 1653 |
|
|
/* Tuner, Radio, external, internal, off, on */
|
| 1654 |
|
|
.audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
|
| 1655 |
|
|
.needs_tvaudio = 0,
|
| 1656 |
|
|
.no_msp34xx = 1,
|
| 1657 |
|
|
.pll = PLL_28,
|
| 1658 |
|
|
.tuner_type = 2,
|
| 1659 |
|
|
.audio_hook = adtvk503_audio,
|
| 1660 |
|
|
},{
|
| 1661 |
|
|
|
| 1662 |
|
|
/* ---- card 0x64 ---------------------------------- */
|
| 1663 |
|
|
.name = "Hercules Smart TV Stereo",
|
| 1664 |
|
|
.video_inputs = 4,
|
| 1665 |
|
|
.audio_inputs = 1,
|
| 1666 |
|
|
.tuner = 0,
|
| 1667 |
|
|
.svhs = 2,
|
| 1668 |
|
|
.gpiomask = 0x00,
|
| 1669 |
|
|
.muxsel = { 2, 3, 1, 1 },
|
| 1670 |
|
|
.needs_tvaudio = 1,
|
| 1671 |
|
|
.no_msp34xx = 1,
|
| 1672 |
|
|
.pll = PLL_28,
|
| 1673 |
|
|
.tuner_type = 5,
|
| 1674 |
|
|
/* Notes:
|
| 1675 |
|
|
- card lacks subsystem ID
|
| 1676 |
|
|
- stereo variant w/ daughter board with tda9874a @0xb0
|
| 1677 |
|
|
- Audio Routing:
|
| 1678 |
|
|
always from tda9874 independent of GPIO (?)
|
| 1679 |
|
|
external line in: unknown
|
| 1680 |
|
|
- Other chips: em78p156elp @ 0x96 (probably IR remote control)
|
| 1681 |
|
|
hef4053 (instead 4052) for unknown function
|
| 1682 |
|
|
*/
|
| 1683 |
|
|
},{
|
| 1684 |
|
|
.name = "Pace TV & Radio Card",
|
| 1685 |
|
|
.video_inputs = 4,
|
| 1686 |
|
|
.audio_inputs = 1,
|
| 1687 |
|
|
.tuner = 0,
|
| 1688 |
|
|
.svhs = 2,
|
| 1689 |
|
|
.muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
|
| 1690 |
|
|
.gpiomask = 0,
|
| 1691 |
|
|
.no_tda9875 = 1,
|
| 1692 |
|
|
.no_tda7432 = 1,
|
| 1693 |
|
|
.tuner_type = 1,
|
| 1694 |
|
|
.has_radio = 1,
|
| 1695 |
|
|
.pll = PLL_28,
|
| 1696 |
|
|
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
|
| 1697 |
|
|
only internal line out: (4pin header) RGGL
|
| 1698 |
|
|
Radio must be decoded by msp3410d (not routed through)*/
|
| 1699 |
|
|
// .digital_mode = DIGITAL_MODE_CAMERA, // todo!
|
| 1700 |
|
|
},{
|
| 1701 |
|
|
/* Chris Willing <chris@vislab.usyd.edu.au> */
|
| 1702 |
|
|
.name = "IVC-200",
|
| 1703 |
|
|
.video_inputs = 1,
|
| 1704 |
|
|
.audio_inputs = 0,
|
| 1705 |
|
|
.tuner = -1,
|
| 1706 |
|
|
.tuner_type = -1,
|
| 1707 |
|
|
.svhs = -1,
|
| 1708 |
|
|
.gpiomask = 0xdf,
|
| 1709 |
|
|
.muxsel = { 2 },
|
| 1710 |
|
|
.pll = PLL_28,
|
| 1711 |
|
|
},{
|
| 1712 |
|
|
.name = "Grand X-Guard / Trust 814PCI",
|
| 1713 |
|
|
.video_inputs = 16,
|
| 1714 |
|
|
.audio_inputs = 0,
|
| 1715 |
|
|
.tuner = -1,
|
| 1716 |
|
|
.svhs = -1,
|
| 1717 |
|
|
.tuner_type = 4,
|
| 1718 |
|
|
.gpiomask2 = 0xff,
|
| 1719 |
|
|
.muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
|
| 1720 |
|
|
.muxsel_hook = xguard_muxsel,
|
| 1721 |
|
|
.no_msp34xx = 1,
|
| 1722 |
|
|
.no_tda9875 = 1,
|
| 1723 |
|
|
.no_tda7432 = 1,
|
| 1724 |
|
|
.pll = PLL_28,
|
| 1725 |
|
|
},{
|
| 1726 |
|
|
|
| 1727 |
|
|
/* ---- card 0x68 ---------------------------------- */
|
| 1728 |
|
|
.name = "Nebula Electronics DigiTV",
|
| 1729 |
|
|
.video_inputs = 0,
|
| 1730 |
|
|
.audio_inputs = 0,
|
| 1731 |
|
|
.svhs = -1,
|
| 1732 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 1733 |
|
|
.needs_tvaudio = 0,
|
| 1734 |
|
|
.no_msp34xx = 1,
|
| 1735 |
|
|
.no_tda9875 = 1,
|
| 1736 |
|
|
.no_tda7432 = 1,
|
| 1737 |
|
|
.pll = PLL_28,
|
| 1738 |
|
|
.tuner_type = -1,
|
| 1739 |
|
|
},{
|
| 1740 |
|
|
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
|
| 1741 |
|
|
.name = "ProVideo PV143",
|
| 1742 |
|
|
.video_inputs = 4,
|
| 1743 |
|
|
.audio_inputs = 0,
|
| 1744 |
|
|
.tuner = -1,
|
| 1745 |
|
|
.svhs = -1,
|
| 1746 |
|
|
.gpiomask = 0,
|
| 1747 |
|
|
.muxsel = { 2, 3, 1, 0 },
|
| 1748 |
|
|
.audiomux = { 0 },
|
| 1749 |
|
|
.needs_tvaudio = 0,
|
| 1750 |
|
|
.no_msp34xx = 1,
|
| 1751 |
|
|
.pll = PLL_28,
|
| 1752 |
|
|
.tuner_type = -1,
|
| 1753 |
|
|
},{
|
| 1754 |
|
|
/* M.Klahr@phytec.de */
|
| 1755 |
|
|
.name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
|
| 1756 |
|
|
.video_inputs = 4,
|
| 1757 |
|
|
.audio_inputs = 0,
|
| 1758 |
|
|
.tuner = -1, /* card has no tuner */
|
| 1759 |
|
|
.svhs = 3,
|
| 1760 |
|
|
.gpiomask = 0x00,
|
| 1761 |
|
|
.muxsel = { 2, 3, 1, 0},
|
| 1762 |
|
|
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
| 1763 |
|
|
.needs_tvaudio = 1,
|
| 1764 |
|
|
.pll = PLL_28,
|
| 1765 |
|
|
.tuner_type = -1,
|
| 1766 |
|
|
},{
|
| 1767 |
|
|
.name = "PHYTEC VD-009-X1 Combi (bt878)",
|
| 1768 |
|
|
.video_inputs = 4,
|
| 1769 |
|
|
.audio_inputs = 0,
|
| 1770 |
|
|
.tuner = -1, /* card has no tuner */
|
| 1771 |
|
|
.svhs = 3,
|
| 1772 |
|
|
.gpiomask = 0x00,
|
| 1773 |
|
|
.muxsel = { 2, 3, 1, 1},
|
| 1774 |
|
|
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
| 1775 |
|
|
.needs_tvaudio = 1,
|
| 1776 |
|
|
.pll = PLL_28,
|
| 1777 |
|
|
.tuner_type = -1,
|
| 1778 |
|
|
},{
|
| 1779 |
|
|
|
| 1780 |
|
|
/* ---- card 0x6c ---------------------------------- */
|
| 1781 |
|
|
.name = "PHYTEC VD-009 MiniDIN (bt878)",
|
| 1782 |
|
|
.video_inputs = 10,
|
| 1783 |
|
|
.audio_inputs = 0,
|
| 1784 |
|
|
.tuner = -1, /* card has no tuner */
|
| 1785 |
|
|
.svhs = 9,
|
| 1786 |
|
|
.gpiomask = 0x00,
|
| 1787 |
|
|
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
|
| 1788 |
|
|
via the upper nibble of muxsel. here: used for
|
| 1789 |
|
|
xternal video-mux */
|
| 1790 |
|
|
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
|
| 1791 |
|
|
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
| 1792 |
|
|
.needs_tvaudio = 1,
|
| 1793 |
|
|
.pll = PLL_28,
|
| 1794 |
|
|
.tuner_type = -1,
|
| 1795 |
|
|
},{
|
| 1796 |
|
|
.name = "PHYTEC VD-009 Combi (bt878)",
|
| 1797 |
|
|
.video_inputs = 10,
|
| 1798 |
|
|
.audio_inputs = 0,
|
| 1799 |
|
|
.tuner = -1, /* card has no tuner */
|
| 1800 |
|
|
.svhs = 9,
|
| 1801 |
|
|
.gpiomask = 0x00,
|
| 1802 |
|
|
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
|
| 1803 |
|
|
via the upper nibble of muxsel. here: used for
|
| 1804 |
|
|
xternal video-mux */
|
| 1805 |
|
|
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
|
| 1806 |
|
|
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
| 1807 |
|
|
.needs_tvaudio = 1,
|
| 1808 |
|
|
.pll = PLL_28,
|
| 1809 |
|
|
.tuner_type = -1,
|
| 1810 |
|
|
}};
|
| 1811 |
|
|
|
| 1812 |
|
|
const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
|
| 1813 |
|
|
|
| 1814 |
|
|
/* ----------------------------------------------------------------------- */
|
| 1815 |
|
|
|
| 1816 |
|
|
static unsigned char eeprom_data[256];
|
| 1817 |
|
|
|
| 1818 |
|
|
/*
|
| 1819 |
|
|
* identify card
|
| 1820 |
|
|
*/
|
| 1821 |
|
|
void __devinit bttv_idcard(struct bttv *btv)
|
| 1822 |
|
|
{
|
| 1823 |
|
|
unsigned int gpiobits;
|
| 1824 |
|
|
int i,type;
|
| 1825 |
|
|
unsigned short tmp;
|
| 1826 |
|
|
|
| 1827 |
|
|
/* read PCI subsystem ID */
|
| 1828 |
|
|
pci_read_config_word(btv->dev, PCI_SUBSYSTEM_ID, &tmp);
|
| 1829 |
|
|
btv->cardid = tmp << 16;
|
| 1830 |
|
|
pci_read_config_word(btv->dev, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
|
| 1831 |
|
|
btv->cardid |= tmp;
|
| 1832 |
|
|
|
| 1833 |
|
|
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
|
| 1834 |
|
|
/* look for the card */
|
| 1835 |
|
|
for (type = -1, i = 0; cards[i].id != 0; i++)
|
| 1836 |
|
|
if (cards[i].id == btv->cardid)
|
| 1837 |
|
|
type = i;
|
| 1838 |
|
|
|
| 1839 |
|
|
if (type != -1) {
|
| 1840 |
|
|
/* found it */
|
| 1841 |
|
|
printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
|
| 1842 |
|
|
"PCI subsystem ID is %04x:%04x\n",
|
| 1843 |
|
|
btv->nr,cards[type].name,cards[type].cardnr,
|
| 1844 |
|
|
btv->cardid & 0xffff,
|
| 1845 |
|
|
(btv->cardid >> 16) & 0xffff);
|
| 1846 |
|
|
btv->type = cards[type].cardnr;
|
| 1847 |
|
|
} else {
|
| 1848 |
|
|
/* 404 */
|
| 1849 |
|
|
printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
|
| 1850 |
|
|
btv->nr, btv->cardid & 0xffff,
|
| 1851 |
|
|
(btv->cardid >> 16) & 0xffff);
|
| 1852 |
|
|
printk(KERN_DEBUG "please mail id, board name and "
|
| 1853 |
|
|
"the correct card= insmod option to kraxel@bytesex.org\n");
|
| 1854 |
|
|
}
|
| 1855 |
|
|
}
|
| 1856 |
|
|
|
| 1857 |
|
|
/* let the user override the autodetected type */
|
| 1858 |
|
|
if (card[btv->nr] < bttv_num_tvcards)
|
| 1859 |
|
|
btv->type=card[btv->nr];
|
| 1860 |
|
|
|
| 1861 |
|
|
/* print which card config we are using */
|
| 1862 |
|
|
printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->nr,
|
| 1863 |
|
|
bttv_tvcards[btv->type].name, btv->type,
|
| 1864 |
|
|
card[btv->nr] < bttv_num_tvcards
|
| 1865 |
|
|
? "insmod option" : "autodetected");
|
| 1866 |
|
|
|
| 1867 |
|
|
/* overwrite gpio stuff ?? */
|
| 1868 |
|
|
if (UNSET == audioall && UNSET == audiomux[0])
|
| 1869 |
|
|
return;
|
| 1870 |
|
|
|
| 1871 |
|
|
if (UNSET != audiomux[0]) {
|
| 1872 |
|
|
gpiobits = 0;
|
| 1873 |
|
|
for (i = 0; i < 5; i++) {
|
| 1874 |
|
|
bttv_tvcards[btv->type].audiomux[i] = audiomux[i];
|
| 1875 |
|
|
gpiobits |= audiomux[i];
|
| 1876 |
|
|
}
|
| 1877 |
|
|
} else {
|
| 1878 |
|
|
gpiobits = audioall;
|
| 1879 |
|
|
for (i = 0; i < 5; i++) {
|
| 1880 |
|
|
bttv_tvcards[btv->type].audiomux[i] = audioall;
|
| 1881 |
|
|
}
|
| 1882 |
|
|
}
|
| 1883 |
|
|
bttv_tvcards[btv->type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
|
| 1884 |
|
|
printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
|
| 1885 |
|
|
btv->nr,bttv_tvcards[btv->type].gpiomask);
|
| 1886 |
|
|
for (i = 0; i < 5; i++) {
|
| 1887 |
|
|
printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->type].audiomux[i]);
|
| 1888 |
|
|
}
|
| 1889 |
|
|
printk("\n");
|
| 1890 |
|
|
}
|
| 1891 |
|
|
|
| 1892 |
|
|
/*
|
| 1893 |
|
|
* (most) board specific initialisations goes here
|
| 1894 |
|
|
*/
|
| 1895 |
|
|
|
| 1896 |
|
|
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
|
| 1897 |
|
|
void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
|
| 1898 |
|
|
{
|
| 1899 |
|
|
int type = -1;
|
| 1900 |
|
|
|
| 1901 |
|
|
if (0 == strncmp(eeprom_data,"GET.MM20xPCTV",13))
|
| 1902 |
|
|
type = BTTV_MODTEC_205;
|
| 1903 |
|
|
else if (0 == strncmp(eeprom_data+20,"Picolo",7))
|
| 1904 |
|
|
type = BTTV_EURESYS_PICOLO;
|
| 1905 |
|
|
else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
|
| 1906 |
|
|
type = BTTV_HAUPPAUGE; /* old bt848 */
|
| 1907 |
|
|
|
| 1908 |
|
|
if (-1 != type) {
|
| 1909 |
|
|
btv->type = type;
|
| 1910 |
|
|
printk("bttv%d: detected by eeprom: %s [card=%d]\n",
|
| 1911 |
|
|
btv->nr, bttv_tvcards[btv->type].name, btv->type);
|
| 1912 |
|
|
}
|
| 1913 |
|
|
}
|
| 1914 |
|
|
|
| 1915 |
|
|
static void flyvideo_gpio(struct bttv *btv)
|
| 1916 |
|
|
{
|
| 1917 |
|
|
int gpio,outbits,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
|
| 1918 |
|
|
int tuner=-1,ttype;
|
| 1919 |
|
|
|
| 1920 |
|
|
outbits = btread(BT848_GPIO_OUT_EN);
|
| 1921 |
|
|
btwrite(0x00, BT848_GPIO_OUT_EN);
|
| 1922 |
|
|
udelay(8); // without this we would see the 0x1800 mask
|
| 1923 |
|
|
gpio=btread(BT848_GPIO_DATA);
|
| 1924 |
|
|
btwrite(outbits, BT848_GPIO_OUT_EN);
|
| 1925 |
|
|
// all cards provide GPIO info, some have an additional eeprom
|
| 1926 |
|
|
// LR50: GPIO coding can be found lower right CP1 .. CP9
|
| 1927 |
|
|
// CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
|
| 1928 |
|
|
// GPIO14-12: n.c.
|
| 1929 |
|
|
// LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
|
| 1930 |
|
|
|
| 1931 |
|
|
// lowest 3 bytes are remote control codes (no handshake needed)
|
| 1932 |
|
|
// xxxFFF: No remote control chip soldered
|
| 1933 |
|
|
// xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
|
| 1934 |
|
|
// Note: Some bits are Audio_Mask !
|
| 1935 |
|
|
|
| 1936 |
|
|
ttype=(gpio&0x0f0000)>>16;
|
| 1937 |
|
|
switch(ttype) {
|
| 1938 |
|
|
case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
|
| 1939 |
|
|
break;
|
| 1940 |
|
|
case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
|
| 1941 |
|
|
break;
|
| 1942 |
|
|
case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
|
| 1943 |
|
|
break;
|
| 1944 |
|
|
case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
|
| 1945 |
|
|
break;
|
| 1946 |
|
|
case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
|
| 1947 |
|
|
break;
|
| 1948 |
|
|
default:
|
| 1949 |
|
|
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->nr);
|
| 1950 |
|
|
}
|
| 1951 |
|
|
|
| 1952 |
|
|
has_remote = gpio & 0x800000;
|
| 1953 |
|
|
has_radio = gpio & 0x400000;
|
| 1954 |
|
|
// unknown 0x200000;
|
| 1955 |
|
|
// unknown2 0x100000;
|
| 1956 |
|
|
is_capture_only = !(gpio & 0x008000); //GPIO15
|
| 1957 |
|
|
has_tda9820_tda9821 = !(gpio & 0x004000);
|
| 1958 |
|
|
is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
|
| 1959 |
|
|
// gpio & 0x001000 // output bit for audio routing
|
| 1960 |
|
|
|
| 1961 |
|
|
if(is_capture_only)
|
| 1962 |
|
|
tuner=4; // No tuner present
|
| 1963 |
|
|
|
| 1964 |
|
|
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
|
| 1965 |
|
|
btv->nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
|
| 1966 |
|
|
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
|
| 1967 |
|
|
btv->nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
|
| 1968 |
|
|
is_capture_only?"yes":"no ");
|
| 1969 |
|
|
|
| 1970 |
|
|
if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
|
| 1971 |
|
|
btv->tuner_type = tuner;
|
| 1972 |
|
|
btv->has_radio = has_radio;
|
| 1973 |
|
|
|
| 1974 |
|
|
// LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
|
| 1975 |
|
|
// LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
|
| 1976 |
|
|
// Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
|
| 1977 |
|
|
if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
|
| 1978 |
|
|
//todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
|
| 1979 |
|
|
}
|
| 1980 |
|
|
|
| 1981 |
|
|
int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
|
| 1982 |
|
|
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
|
| 1983 |
|
|
int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
|
| 1984 |
|
|
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
|
| 1985 |
|
|
|
| 1986 |
|
|
static void miro_pinnacle_gpio(struct bttv *btv)
|
| 1987 |
|
|
{
|
| 1988 |
|
|
int id,msp,gpio;
|
| 1989 |
|
|
char *info;
|
| 1990 |
|
|
|
| 1991 |
|
|
btwrite(0,BT848_GPIO_OUT_EN);
|
| 1992 |
|
|
gpio = btread(BT848_GPIO_DATA);
|
| 1993 |
|
|
id = ((gpio>>10) & 63) -1;
|
| 1994 |
|
|
msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
|
| 1995 |
|
|
if (id < 32) {
|
| 1996 |
|
|
btv->tuner_type = miro_tunermap[id];
|
| 1997 |
|
|
if (0 == (gpio & 0x20)) {
|
| 1998 |
|
|
btv->has_radio = 1;
|
| 1999 |
|
|
if (!miro_fmtuner[id]) {
|
| 2000 |
|
|
btv->has_matchbox = 1;
|
| 2001 |
|
|
btv->mbox_we = (1<<6);
|
| 2002 |
|
|
btv->mbox_most = (1<<7);
|
| 2003 |
|
|
btv->mbox_clk = (1<<8);
|
| 2004 |
|
|
btv->mbox_data = (1<<9);
|
| 2005 |
|
|
btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
|
| 2006 |
|
|
}
|
| 2007 |
|
|
} else {
|
| 2008 |
|
|
btv->has_radio = 0;
|
| 2009 |
|
|
}
|
| 2010 |
|
|
if (-1 != msp) {
|
| 2011 |
|
|
if (btv->type == BTTV_MIRO)
|
| 2012 |
|
|
btv->type = BTTV_MIROPRO;
|
| 2013 |
|
|
if (btv->type == BTTV_PINNACLE)
|
| 2014 |
|
|
btv->type = BTTV_PINNACLEPRO;
|
| 2015 |
|
|
}
|
| 2016 |
|
|
printk(KERN_INFO
|
| 2017 |
|
|
"bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
|
| 2018 |
|
|
btv->nr, id+1, btv->tuner_type,
|
| 2019 |
|
|
!btv->has_radio ? "no" :
|
| 2020 |
|
|
(btv->has_matchbox ? "matchbox" : "fmtuner"),
|
| 2021 |
|
|
(-1 == msp) ? "no" : "yes");
|
| 2022 |
|
|
} else {
|
| 2023 |
|
|
/* new cards with microtune tuner */
|
| 2024 |
|
|
id = 63 - id;
|
| 2025 |
|
|
btv->has_radio = 0;
|
| 2026 |
|
|
switch (id) {
|
| 2027 |
|
|
case 1:
|
| 2028 |
|
|
info = "PAL / mono";
|
| 2029 |
|
|
break;
|
| 2030 |
|
|
case 2:
|
| 2031 |
|
|
info = "PAL+SECAM / stereo";
|
| 2032 |
|
|
btv->has_radio = 1;
|
| 2033 |
|
|
break;
|
| 2034 |
|
|
case 3:
|
| 2035 |
|
|
info = "NTSC / stereo";
|
| 2036 |
|
|
btv->has_radio = 1;
|
| 2037 |
|
|
break;
|
| 2038 |
|
|
case 4:
|
| 2039 |
|
|
info = "PAL+SECAM / mono";
|
| 2040 |
|
|
break;
|
| 2041 |
|
|
case 5:
|
| 2042 |
|
|
info = "NTSC / mono";
|
| 2043 |
|
|
break;
|
| 2044 |
|
|
case 6:
|
| 2045 |
|
|
info = "NTSC / stereo";
|
| 2046 |
|
|
break;
|
| 2047 |
|
|
default:
|
| 2048 |
|
|
info = "oops: unknown card";
|
| 2049 |
|
|
break;
|
| 2050 |
|
|
}
|
| 2051 |
|
|
if (-1 != msp)
|
| 2052 |
|
|
btv->type = BTTV_PINNACLEPRO;
|
| 2053 |
|
|
printk(KERN_INFO
|
| 2054 |
|
|
"bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
|
| 2055 |
|
|
btv->nr, id, info, btv->has_radio ? "yes" : "no");
|
| 2056 |
|
|
btv->tuner_type = 33;
|
| 2057 |
|
|
btv->pinnacle_id = id;
|
| 2058 |
|
|
}
|
| 2059 |
|
|
}
|
| 2060 |
|
|
|
| 2061 |
|
|
/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
|
| 2062 |
|
|
#define LM1882_SYNC_DRIVE 0x200000L
|
| 2063 |
|
|
|
| 2064 |
|
|
static void init_ids_eagle(struct bttv *btv)
|
| 2065 |
|
|
{
|
| 2066 |
|
|
btwrite(0xFFFF37, BT848_GPIO_OUT_EN);
|
| 2067 |
|
|
btwrite(0x000000, BT848_GPIO_REG_INP);
|
| 2068 |
|
|
|
| 2069 |
|
|
btwrite(0x200020, BT848_GPIO_DATA);
|
| 2070 |
|
|
|
| 2071 |
|
|
/* flash strobe inverter ?! */
|
| 2072 |
|
|
btwrite(0x200024, BT848_GPIO_DATA);
|
| 2073 |
|
|
|
| 2074 |
|
|
/* switch sync drive off */
|
| 2075 |
|
|
btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA);
|
| 2076 |
|
|
|
| 2077 |
|
|
/* set BT848 muxel to 2 */
|
| 2078 |
|
|
btaor((2)<<5, ~(2<<5), BT848_IFORM);
|
| 2079 |
|
|
}
|
| 2080 |
|
|
|
| 2081 |
|
|
/* Muxsel helper for the IDS Eagle.
|
| 2082 |
|
|
* the eagles does not use the standard muxsel-bits but
|
| 2083 |
|
|
* has its own multiplexer */
|
| 2084 |
|
|
static void eagle_muxsel(struct bttv *btv, unsigned int input)
|
| 2085 |
|
|
{
|
| 2086 |
|
|
btaor((2)<<5, ~(3<<5), BT848_IFORM);
|
| 2087 |
|
|
btaor((bttv_tvcards[btv->type].muxsel[input&7]&3),
|
| 2088 |
|
|
~3, BT848_GPIO_DATA);
|
| 2089 |
|
|
|
| 2090 |
|
|
#if 0
|
| 2091 |
|
|
/* svhs */
|
| 2092 |
|
|
/* wake chroma ADC */
|
| 2093 |
|
|
btand(~BT848_ADC_C_SLEEP, BT848_ADC);
|
| 2094 |
|
|
/* set to YC video */
|
| 2095 |
|
|
btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
|
| 2096 |
|
|
btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
|
| 2097 |
|
|
#else
|
| 2098 |
|
|
/* composite */
|
| 2099 |
|
|
/* set chroma ADC to sleep */
|
| 2100 |
|
|
btor(BT848_ADC_C_SLEEP, BT848_ADC);
|
| 2101 |
|
|
/* set to composite video */
|
| 2102 |
|
|
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
|
| 2103 |
|
|
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
|
| 2104 |
|
|
#endif
|
| 2105 |
|
|
|
| 2106 |
|
|
/* switch sync drive off */
|
| 2107 |
|
|
btor(LM1882_SYNC_DRIVE, BT848_GPIO_DATA);
|
| 2108 |
|
|
}
|
| 2109 |
|
|
|
| 2110 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2111 |
|
|
|
| 2112 |
|
|
/* initialization part one -- before registering i2c bus */
|
| 2113 |
|
|
void __devinit bttv_init_card1(struct bttv *btv)
|
| 2114 |
|
|
{
|
| 2115 |
|
|
switch (btv->type) {
|
| 2116 |
|
|
case BTTV_HAUPPAUGE:
|
| 2117 |
|
|
case BTTV_HAUPPAUGE878:
|
| 2118 |
|
|
boot_msp34xx(btv,5);
|
| 2119 |
|
|
break;
|
| 2120 |
|
|
case BTTV_VOODOOTV_FM:
|
| 2121 |
|
|
boot_msp34xx(btv,20);
|
| 2122 |
|
|
break;
|
| 2123 |
|
|
case BTTV_AVERMEDIA98:
|
| 2124 |
|
|
boot_msp34xx(btv,11);
|
| 2125 |
|
|
break;
|
| 2126 |
|
|
case BTTV_HAUPPAUGEPVR:
|
| 2127 |
|
|
pvr_boot(btv);
|
| 2128 |
|
|
break;
|
| 2129 |
|
|
}
|
| 2130 |
|
|
}
|
| 2131 |
|
|
|
| 2132 |
|
|
/* initialization part two -- after registering i2c bus */
|
| 2133 |
|
|
void __devinit bttv_init_card2(struct bttv *btv)
|
| 2134 |
|
|
{
|
| 2135 |
|
|
btv->tuner_type = -1;
|
| 2136 |
|
|
|
| 2137 |
|
|
if (BTTV_UNKNOWN == btv->type) {
|
| 2138 |
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
| 2139 |
|
|
identify_by_eeprom(btv,eeprom_data);
|
| 2140 |
|
|
}
|
| 2141 |
|
|
|
| 2142 |
|
|
switch (btv->type) {
|
| 2143 |
|
|
case BTTV_MIRO:
|
| 2144 |
|
|
case BTTV_MIROPRO:
|
| 2145 |
|
|
case BTTV_PINNACLE:
|
| 2146 |
|
|
case BTTV_PINNACLEPRO:
|
| 2147 |
|
|
/* miro/pinnacle */
|
| 2148 |
|
|
miro_pinnacle_gpio(btv);
|
| 2149 |
|
|
break;
|
| 2150 |
|
|
case BTTV_FLYVIDEO_98:
|
| 2151 |
|
|
case BTTV_MAXI:
|
| 2152 |
|
|
case BTTV_LIFE_FLYKIT:
|
| 2153 |
|
|
case BTTV_FLYVIDEO:
|
| 2154 |
|
|
case BTTV_TYPHOON_TVIEW:
|
| 2155 |
|
|
case BTTV_CHRONOS_VS2:
|
| 2156 |
|
|
case BTTV_FLYVIDEO_98FM:
|
| 2157 |
|
|
case BTTV_FLYVIDEO2000:
|
| 2158 |
|
|
case BTTV_FLYVIDEO98EZ:
|
| 2159 |
|
|
case BTTV_CONFERENCETV:
|
| 2160 |
|
|
case BTTV_LIFETEC_9415:
|
| 2161 |
|
|
flyvideo_gpio(btv);
|
| 2162 |
|
|
break;
|
| 2163 |
|
|
case BTTV_HAUPPAUGE:
|
| 2164 |
|
|
case BTTV_HAUPPAUGE878:
|
| 2165 |
|
|
case BTTV_HAUPPAUGEPVR:
|
| 2166 |
|
|
/* pick up some config infos from the eeprom */
|
| 2167 |
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
| 2168 |
|
|
hauppauge_eeprom(btv);
|
| 2169 |
|
|
break;
|
| 2170 |
|
|
case BTTV_AVERMEDIA98:
|
| 2171 |
|
|
case BTTV_AVPHONE98:
|
| 2172 |
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
| 2173 |
|
|
avermedia_eeprom(btv);
|
| 2174 |
|
|
break;
|
| 2175 |
|
|
case BTTV_PXC200:
|
| 2176 |
|
|
init_PXC200(btv);
|
| 2177 |
|
|
break;
|
| 2178 |
|
|
case BTTV_VHX:
|
| 2179 |
|
|
btv->has_radio = 1;
|
| 2180 |
|
|
btv->has_matchbox = 1;
|
| 2181 |
|
|
btv->mbox_we = 0x20;
|
| 2182 |
|
|
btv->mbox_most = 0;
|
| 2183 |
|
|
btv->mbox_clk = 0x08;
|
| 2184 |
|
|
btv->mbox_data = 0x10;
|
| 2185 |
|
|
btv->mbox_mask = 0x38;
|
| 2186 |
|
|
break;
|
| 2187 |
|
|
case BTTV_VOBIS_BOOSTAR:
|
| 2188 |
|
|
case BTTV_TERRATV:
|
| 2189 |
|
|
terratec_active_radio_upgrade(btv);
|
| 2190 |
|
|
break;
|
| 2191 |
|
|
case BTTV_MAGICTVIEW061:
|
| 2192 |
|
|
if (btv->cardid == 0x3002144f) {
|
| 2193 |
|
|
btv->has_radio=1;
|
| 2194 |
|
|
printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->nr);
|
| 2195 |
|
|
}
|
| 2196 |
|
|
break;
|
| 2197 |
|
|
case BTTV_STB2:
|
| 2198 |
|
|
if (btv->cardid == 0x3060121a) {
|
| 2199 |
|
|
/* Fix up entry for 3DFX VoodooTV 100,
|
| 2200 |
|
|
which is an OEM STB card variant. */
|
| 2201 |
|
|
btv->has_radio=0;
|
| 2202 |
|
|
btv->tuner_type=TUNER_TEMIC_NTSC;
|
| 2203 |
|
|
}
|
| 2204 |
|
|
break;
|
| 2205 |
|
|
case BTTV_OSPREY1x0:
|
| 2206 |
|
|
case BTTV_OSPREY1x0_848:
|
| 2207 |
|
|
case BTTV_OSPREY101_848:
|
| 2208 |
|
|
case BTTV_OSPREY1x1:
|
| 2209 |
|
|
case BTTV_OSPREY1x1_SVID:
|
| 2210 |
|
|
case BTTV_OSPREY2xx:
|
| 2211 |
|
|
case BTTV_OSPREY2x0_SVID:
|
| 2212 |
|
|
case BTTV_OSPREY2x0:
|
| 2213 |
|
|
case BTTV_OSPREY500:
|
| 2214 |
|
|
case BTTV_OSPREY540:
|
| 2215 |
|
|
case BTTV_OSPREY2000:
|
| 2216 |
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
| 2217 |
|
|
osprey_eeprom(btv);
|
| 2218 |
|
|
break;
|
| 2219 |
|
|
case BTTV_IDS_EAGLE:
|
| 2220 |
|
|
init_ids_eagle(btv);
|
| 2221 |
|
|
break;
|
| 2222 |
|
|
case BTTV_MODTEC_205:
|
| 2223 |
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
| 2224 |
|
|
modtec_eeprom(btv);
|
| 2225 |
|
|
break;
|
| 2226 |
|
|
}
|
| 2227 |
|
|
|
| 2228 |
|
|
/* pll configuration */
|
| 2229 |
|
|
if (!(btv->id==848 && btv->revision==0x11)) {
|
| 2230 |
|
|
/* defaults from card list */
|
| 2231 |
|
|
if (PLL_28 == bttv_tvcards[btv->type].pll) {
|
| 2232 |
|
|
btv->pll.pll_ifreq=28636363;
|
| 2233 |
|
|
btv->pll.pll_crystal=BT848_IFORM_XT0;
|
| 2234 |
|
|
}
|
| 2235 |
|
|
if (PLL_35 == bttv_tvcards[btv->type].pll) {
|
| 2236 |
|
|
btv->pll.pll_ifreq=35468950;
|
| 2237 |
|
|
btv->pll.pll_crystal=BT848_IFORM_XT1;
|
| 2238 |
|
|
}
|
| 2239 |
|
|
/* insmod options can override */
|
| 2240 |
|
|
switch (pll[btv->nr]) {
|
| 2241 |
|
|
case 0: /* none */
|
| 2242 |
|
|
btv->pll.pll_crystal = 0;
|
| 2243 |
|
|
btv->pll.pll_ifreq = 0;
|
| 2244 |
|
|
btv->pll.pll_ofreq = 0;
|
| 2245 |
|
|
break;
|
| 2246 |
|
|
case 1: /* 28 MHz */
|
| 2247 |
|
|
case 28:
|
| 2248 |
|
|
btv->pll.pll_ifreq = 28636363;
|
| 2249 |
|
|
btv->pll.pll_ofreq = 0;
|
| 2250 |
|
|
btv->pll.pll_crystal = BT848_IFORM_XT0;
|
| 2251 |
|
|
break;
|
| 2252 |
|
|
case 2: /* 35 MHz */
|
| 2253 |
|
|
case 35:
|
| 2254 |
|
|
btv->pll.pll_ifreq = 35468950;
|
| 2255 |
|
|
btv->pll.pll_ofreq = 0;
|
| 2256 |
|
|
btv->pll.pll_crystal = BT848_IFORM_XT1;
|
| 2257 |
|
|
break;
|
| 2258 |
|
|
}
|
| 2259 |
|
|
}
|
| 2260 |
|
|
btv->pll.pll_current = -1;
|
| 2261 |
|
|
|
| 2262 |
|
|
/* tuner configuration (from card list / autodetect / insmod option) */
|
| 2263 |
|
|
if (UNSET != bttv_tvcards[btv->type].tuner_type)
|
| 2264 |
|
|
if(UNSET == btv->tuner_type)
|
| 2265 |
|
|
btv->tuner_type = bttv_tvcards[btv->type].tuner_type;
|
| 2266 |
|
|
if (UNSET != tuner[btv->nr])
|
| 2267 |
|
|
btv->tuner_type = tuner[btv->nr];
|
| 2268 |
|
|
printk("bttv%d: using tuner=%d\n",btv->nr,btv->tuner_type);
|
| 2269 |
|
|
if (btv->pinnacle_id != UNSET)
|
| 2270 |
|
|
bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
|
| 2271 |
|
|
&btv->pinnacle_id);
|
| 2272 |
|
|
if (btv->tuner_type != UNSET)
|
| 2273 |
|
|
bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
|
| 2274 |
|
|
btv->svhs = bttv_tvcards[btv->type].svhs;
|
| 2275 |
|
|
if (svhs[btv->nr] != UNSET)
|
| 2276 |
|
|
btv->svhs = svhs[btv->nr];
|
| 2277 |
|
|
|
| 2278 |
|
|
if (bttv_tvcards[btv->type].has_radio)
|
| 2279 |
|
|
btv->has_radio=1;
|
| 2280 |
|
|
if (bttv_tvcards[btv->type].audio_hook)
|
| 2281 |
|
|
btv->audio_hook=bttv_tvcards[btv->type].audio_hook;
|
| 2282 |
|
|
|
| 2283 |
|
|
if (bttv_tvcards[btv->type].digital_mode == DIGITAL_MODE_CAMERA) {
|
| 2284 |
|
|
/* detect Bt832 chip for quartzsight digital camera */
|
| 2285 |
|
|
if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
|
| 2286 |
|
|
(bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
|
| 2287 |
|
|
boot_bt832(btv);
|
| 2288 |
|
|
}
|
| 2289 |
|
|
|
| 2290 |
|
|
/* try to detect audio/fader chips */
|
| 2291 |
|
|
if (!bttv_tvcards[btv->type].no_msp34xx &&
|
| 2292 |
|
|
bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) {
|
| 2293 |
|
|
if (autoload)
|
| 2294 |
|
|
request_module("msp3400");
|
| 2295 |
|
|
}
|
| 2296 |
|
|
|
| 2297 |
|
|
if (bttv_tvcards[btv->type].msp34xx_alt &&
|
| 2298 |
|
|
bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0) {
|
| 2299 |
|
|
if (autoload)
|
| 2300 |
|
|
request_module("msp3400");
|
| 2301 |
|
|
}
|
| 2302 |
|
|
|
| 2303 |
|
|
if (!bttv_tvcards[btv->type].no_tda9875 &&
|
| 2304 |
|
|
bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) {
|
| 2305 |
|
|
if (autoload)
|
| 2306 |
|
|
request_module("tda9875");
|
| 2307 |
|
|
}
|
| 2308 |
|
|
|
| 2309 |
|
|
if (!bttv_tvcards[btv->type].no_tda7432 &&
|
| 2310 |
|
|
bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) {
|
| 2311 |
|
|
if (autoload)
|
| 2312 |
|
|
request_module("tda7432");
|
| 2313 |
|
|
}
|
| 2314 |
|
|
|
| 2315 |
|
|
if (bttv_tvcards[btv->type].needs_tvaudio) {
|
| 2316 |
|
|
if (autoload)
|
| 2317 |
|
|
request_module("tvaudio");
|
| 2318 |
|
|
}
|
| 2319 |
|
|
|
| 2320 |
|
|
/* tuner modules */
|
| 2321 |
|
|
if (btv->pinnacle_id != UNSET) {
|
| 2322 |
|
|
if (autoload)
|
| 2323 |
|
|
request_module("tda9887");
|
| 2324 |
|
|
}
|
| 2325 |
|
|
if (btv->tuner_type != UNSET) {
|
| 2326 |
|
|
if (autoload)
|
| 2327 |
|
|
request_module("tuner");
|
| 2328 |
|
|
}
|
| 2329 |
|
|
}
|
| 2330 |
|
|
|
| 2331 |
|
|
|
| 2332 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2333 |
|
|
/* some hauppauge specific stuff */
|
| 2334 |
|
|
|
| 2335 |
|
|
static struct HAUPPAUGE_TUNER
|
| 2336 |
|
|
{
|
| 2337 |
|
|
int id;
|
| 2338 |
|
|
char *name;
|
| 2339 |
|
|
}
|
| 2340 |
|
|
hauppauge_tuner[] __devinitdata =
|
| 2341 |
|
|
{
|
| 2342 |
|
|
{ TUNER_ABSENT, "" },
|
| 2343 |
|
|
{ TUNER_ABSENT, "External" },
|
| 2344 |
|
|
{ TUNER_ABSENT, "Unspecified" },
|
| 2345 |
|
|
{ TUNER_PHILIPS_PAL, "Philips FI1216" },
|
| 2346 |
|
|
{ TUNER_PHILIPS_SECAM, "Philips FI1216MF" },
|
| 2347 |
|
|
{ TUNER_PHILIPS_NTSC, "Philips FI1236" },
|
| 2348 |
|
|
{ TUNER_PHILIPS_PAL_I, "Philips FI1246" },
|
| 2349 |
|
|
{ TUNER_PHILIPS_PAL_DK,"Philips FI1256" },
|
| 2350 |
|
|
{ TUNER_PHILIPS_PAL, "Philips FI1216 MK2" },
|
| 2351 |
|
|
{ TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" },
|
| 2352 |
|
|
{ TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" },
|
| 2353 |
|
|
{ TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" },
|
| 2354 |
|
|
{ TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" },
|
| 2355 |
|
|
{ TUNER_TEMIC_NTSC, "Temic 4032FY5" },
|
| 2356 |
|
|
{ TUNER_TEMIC_PAL, "Temic 4002FH5" },
|
| 2357 |
|
|
{ TUNER_TEMIC_PAL_I, "Temic 4062FY5" },
|
| 2358 |
|
|
{ TUNER_PHILIPS_PAL, "Philips FR1216 MK2" },
|
| 2359 |
|
|
{ TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" },
|
| 2360 |
|
|
{ TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" },
|
| 2361 |
|
|
{ TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" },
|
| 2362 |
|
|
{ TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" },
|
| 2363 |
|
|
{ TUNER_PHILIPS_PAL, "Philips FM1216" },
|
| 2364 |
|
|
{ TUNER_PHILIPS_SECAM, "Philips FM1216MF" },
|
| 2365 |
|
|
{ TUNER_PHILIPS_NTSC, "Philips FM1236" },
|
| 2366 |
|
|
{ TUNER_PHILIPS_PAL_I, "Philips FM1246" },
|
| 2367 |
|
|
{ TUNER_PHILIPS_PAL_DK,"Philips FM1256" },
|
| 2368 |
|
|
{ TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" },
|
| 2369 |
|
|
{ TUNER_ABSENT, "Samsung TCPN9082D" },
|
| 2370 |
|
|
{ TUNER_ABSENT, "Samsung TCPM9092P" },
|
| 2371 |
|
|
{ TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" },
|
| 2372 |
|
|
{ TUNER_ABSENT, "Samsung TCPN9085D" },
|
| 2373 |
|
|
{ TUNER_ABSENT, "Samsung TCPB9085P" },
|
| 2374 |
|
|
{ TUNER_ABSENT, "Samsung TCPL9091P" },
|
| 2375 |
|
|
{ TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" },
|
| 2376 |
|
|
{ TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" },
|
| 2377 |
|
|
{ TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" },
|
| 2378 |
|
|
{ TUNER_ABSENT, "Philips TD1536" },
|
| 2379 |
|
|
{ TUNER_ABSENT, "Philips TD1536D" },
|
| 2380 |
|
|
{ TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */
|
| 2381 |
|
|
{ TUNER_ABSENT, "Philips FI1256MP" },
|
| 2382 |
|
|
{ TUNER_ABSENT, "Samsung TCPQ9091P" },
|
| 2383 |
|
|
{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
|
| 2384 |
|
|
{ TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" },
|
| 2385 |
|
|
{ TUNER_TEMIC_4046FM5, "Temic 4046FM5" },
|
| 2386 |
|
|
{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
|
| 2387 |
|
|
{ TUNER_ABSENT, "Philips TD1536D_FH_44"},
|
| 2388 |
|
|
{ TUNER_LG_NTSC_FM, "LG TPI8NSR01F"},
|
| 2389 |
|
|
{ TUNER_LG_PAL_FM, "LG TPI8PSB01D"},
|
| 2390 |
|
|
{ TUNER_LG_PAL, "LG TPI8PSB11D"},
|
| 2391 |
|
|
{ TUNER_LG_PAL_I_FM, "LG TAPC-I001D"},
|
| 2392 |
|
|
{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
|
| 2393 |
|
|
};
|
| 2394 |
|
|
|
| 2395 |
|
|
static void modtec_eeprom(struct bttv *btv)
|
| 2396 |
|
|
{
|
| 2397 |
|
|
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
|
| 2398 |
|
|
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
|
| 2399 |
|
|
printk("bttv Modtec: Tuner autodetected %s\n",
|
| 2400 |
|
|
&eeprom_data[0x1e]);
|
| 2401 |
|
|
} else {
|
| 2402 |
|
|
printk("bttv Modtec: Unknown TunerString:%s\n",
|
| 2403 |
|
|
&eeprom_data[0x1e]);
|
| 2404 |
|
|
}
|
| 2405 |
|
|
}
|
| 2406 |
|
|
|
| 2407 |
|
|
static void __devinit hauppauge_eeprom(struct bttv *btv)
|
| 2408 |
|
|
{
|
| 2409 |
|
|
unsigned int blk2,tuner,radio,model;
|
| 2410 |
|
|
|
| 2411 |
|
|
if (eeprom_data[0] != 0x84 || eeprom_data[2] != 0)
|
| 2412 |
|
|
printk(KERN_WARNING "bttv%d: Hauppauge eeprom: invalid\n",
|
| 2413 |
|
|
btv->nr);
|
| 2414 |
|
|
|
| 2415 |
|
|
/* Block 2 starts after len+3 bytes header */
|
| 2416 |
|
|
blk2 = eeprom_data[1] + 3;
|
| 2417 |
|
|
|
| 2418 |
|
|
/* decode + use some config infos */
|
| 2419 |
|
|
model = eeprom_data[12] << 8 | eeprom_data[11];
|
| 2420 |
|
|
tuner = eeprom_data[9];
|
| 2421 |
|
|
radio = eeprom_data[blk2-1] & 0x01;
|
| 2422 |
|
|
|
| 2423 |
|
|
if (tuner < ARRAY_SIZE(hauppauge_tuner))
|
| 2424 |
|
|
btv->tuner_type = hauppauge_tuner[tuner].id;
|
| 2425 |
|
|
if (radio)
|
| 2426 |
|
|
btv->has_radio = 1;
|
| 2427 |
|
|
|
| 2428 |
|
|
if (bttv_verbose)
|
| 2429 |
|
|
printk(KERN_INFO "bttv%d: Hauppauge eeprom: model=%d, "
|
| 2430 |
|
|
"tuner=%s (%d), radio=%s\n",
|
| 2431 |
|
|
btv->nr, model, hauppauge_tuner[tuner].name,
|
| 2432 |
|
|
btv->tuner_type, radio ? "yes" : "no");
|
| 2433 |
|
|
}
|
| 2434 |
|
|
|
| 2435 |
|
|
static int terratec_active_radio_upgrade(struct bttv *btv)
|
| 2436 |
|
|
{
|
| 2437 |
|
|
int freq;
|
| 2438 |
|
|
|
| 2439 |
|
|
btv->has_radio = 1;
|
| 2440 |
|
|
btv->has_matchbox = 1;
|
| 2441 |
|
|
btv->mbox_we = 0x10;
|
| 2442 |
|
|
btv->mbox_most = 0x20;
|
| 2443 |
|
|
btv->mbox_clk = 0x08;
|
| 2444 |
|
|
btv->mbox_data = 0x04;
|
| 2445 |
|
|
btv->mbox_mask = 0x3c;
|
| 2446 |
|
|
|
| 2447 |
|
|
btv->mbox_iow = 1 << 8;
|
| 2448 |
|
|
btv->mbox_ior = 1 << 9;
|
| 2449 |
|
|
btv->mbox_csel = 1 << 10;
|
| 2450 |
|
|
|
| 2451 |
|
|
freq=88000/62.5;
|
| 2452 |
|
|
tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
|
| 2453 |
|
|
if (0x1ed8 == tea5757_read(btv)) {
|
| 2454 |
|
|
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
|
| 2455 |
|
|
btv->nr);
|
| 2456 |
|
|
btv->has_radio = 1;
|
| 2457 |
|
|
btv->has_matchbox = 1;
|
| 2458 |
|
|
} else {
|
| 2459 |
|
|
btv->has_radio = 0;
|
| 2460 |
|
|
btv->has_matchbox = 0;
|
| 2461 |
|
|
}
|
| 2462 |
|
|
return 0;
|
| 2463 |
|
|
}
|
| 2464 |
|
|
|
| 2465 |
|
|
|
| 2466 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2467 |
|
|
|
| 2468 |
|
|
/*
|
| 2469 |
|
|
* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
|
| 2470 |
|
|
*
|
| 2471 |
|
|
* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
|
| 2472 |
|
|
* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
|
| 2473 |
|
|
* unpacked with unzip).
|
| 2474 |
|
|
*/
|
| 2475 |
|
|
#define PVR_GPIO_DELAY 10
|
| 2476 |
|
|
|
| 2477 |
|
|
#define BTTV_ALT_DATA 0x000001
|
| 2478 |
|
|
#define BTTV_ALT_DCLK 0x100000
|
| 2479 |
|
|
#define BTTV_ALT_NCONFIG 0x800000
|
| 2480 |
|
|
|
| 2481 |
|
|
static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
|
| 2482 |
|
|
{
|
| 2483 |
|
|
u32 n;
|
| 2484 |
|
|
u8 bits;
|
| 2485 |
|
|
int i;
|
| 2486 |
|
|
|
| 2487 |
|
|
btwrite(BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG,
|
| 2488 |
|
|
BT848_GPIO_OUT_EN);
|
| 2489 |
|
|
btwrite(0,BT848_GPIO_DATA);
|
| 2490 |
|
|
udelay(PVR_GPIO_DELAY);
|
| 2491 |
|
|
|
| 2492 |
|
|
btwrite(BTTV_ALT_NCONFIG,BT848_GPIO_DATA);
|
| 2493 |
|
|
udelay(PVR_GPIO_DELAY);
|
| 2494 |
|
|
|
| 2495 |
|
|
for (n = 0; n < microlen; n++) {
|
| 2496 |
|
|
bits = micro[n];
|
| 2497 |
|
|
for ( i = 0 ; i < 8 ; i++ ) {
|
| 2498 |
|
|
btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
|
| 2499 |
|
|
if (bits & 0x01)
|
| 2500 |
|
|
btor(BTTV_ALT_DATA,BT848_GPIO_DATA);
|
| 2501 |
|
|
else
|
| 2502 |
|
|
btand(~BTTV_ALT_DATA,BT848_GPIO_DATA);
|
| 2503 |
|
|
btor(BTTV_ALT_DCLK,BT848_GPIO_DATA);
|
| 2504 |
|
|
bits >>= 1;
|
| 2505 |
|
|
}
|
| 2506 |
|
|
}
|
| 2507 |
|
|
btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
|
| 2508 |
|
|
udelay(PVR_GPIO_DELAY);
|
| 2509 |
|
|
|
| 2510 |
|
|
/* begin Altera init loop (Not necessary,but doesn't hurt) */
|
| 2511 |
|
|
for (i = 0 ; i < 30 ; i++) {
|
| 2512 |
|
|
btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
|
| 2513 |
|
|
btor(BTTV_ALT_DCLK,BT848_GPIO_DATA);
|
| 2514 |
|
|
}
|
| 2515 |
|
|
btand(~BTTV_ALT_DCLK,BT848_GPIO_DATA);
|
| 2516 |
|
|
return 0;
|
| 2517 |
|
|
}
|
| 2518 |
|
|
|
| 2519 |
|
|
#ifndef CONFIG_FW_LOADER
|
| 2520 |
|
|
/* old 2.4.x way -- via soundcore's mod_firmware_load */
|
| 2521 |
|
|
|
| 2522 |
|
|
static char *firm_altera = "/usr/lib/video4linux/hcwamc.rbf";
|
| 2523 |
|
|
MODULE_PARM(firm_altera,"s");
|
| 2524 |
|
|
MODULE_PARM_DESC(firm_altera,"WinTV/PVR firmware "
|
| 2525 |
|
|
"(driver CD => unzip pvr45xxx.exe => hcwamc.rbf)");
|
| 2526 |
|
|
|
| 2527 |
|
|
extern int mod_firmware_load(const char *fn, char **fp);
|
| 2528 |
|
|
|
| 2529 |
|
|
int __devinit pvr_boot(struct bttv *btv)
|
| 2530 |
|
|
{
|
| 2531 |
|
|
u32 microlen;
|
| 2532 |
|
|
u8 *micro;
|
| 2533 |
|
|
int result;
|
| 2534 |
|
|
|
| 2535 |
|
|
microlen = mod_firmware_load(firm_altera, (char**) µ);
|
| 2536 |
|
|
if (!microlen) {
|
| 2537 |
|
|
printk(KERN_WARNING "bttv%d: altera firmware not found [%s]\n",
|
| 2538 |
|
|
btv->nr, firm_altera);
|
| 2539 |
|
|
return -1;
|
| 2540 |
|
|
}
|
| 2541 |
|
|
|
| 2542 |
|
|
printk(KERN_INFO "bttv%d: uploading altera firmware [%s] ...\n",
|
| 2543 |
|
|
btv->nr, firm_altera);
|
| 2544 |
|
|
result = pvr_altera_load(btv, micro, microlen);
|
| 2545 |
|
|
printk(KERN_INFO "bttv%d: ... upload %s\n",
|
| 2546 |
|
|
btv->nr, (result < 0) ? "failed" : "ok");
|
| 2547 |
|
|
vfree(micro);
|
| 2548 |
|
|
return result;
|
| 2549 |
|
|
}
|
| 2550 |
|
|
#else
|
| 2551 |
|
|
/* new 2.5.x way -- via hotplug firmware loader */
|
| 2552 |
|
|
|
| 2553 |
|
|
int __devinit pvr_boot(struct bttv *btv)
|
| 2554 |
|
|
{
|
| 2555 |
|
|
const struct firmware *fw_entry;
|
| 2556 |
|
|
int rc;
|
| 2557 |
|
|
|
| 2558 |
|
|
rc = request_firmware(&fw_entry, "hcwamc.rbf", pci_name(btv->dev));
|
| 2559 |
|
|
if (rc != 0) {
|
| 2560 |
|
|
printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
|
| 2561 |
|
|
btv->nr);
|
| 2562 |
|
|
return rc;
|
| 2563 |
|
|
}
|
| 2564 |
|
|
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
|
| 2565 |
|
|
printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
|
| 2566 |
|
|
btv->nr, (rc < 0) ? "failed" : "ok");
|
| 2567 |
|
|
release_firmware(fw_entry);
|
| 2568 |
|
|
return rc;
|
| 2569 |
|
|
}
|
| 2570 |
|
|
#endif
|
| 2571 |
|
|
|
| 2572 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2573 |
|
|
/* some osprey specific stuff */
|
| 2574 |
|
|
|
| 2575 |
|
|
static void __devinit osprey_eeprom(struct bttv *btv)
|
| 2576 |
|
|
{
|
| 2577 |
|
|
int i = 0;
|
| 2578 |
|
|
unsigned char *ee = eeprom_data;
|
| 2579 |
|
|
unsigned long serial = 0;
|
| 2580 |
|
|
|
| 2581 |
|
|
if (btv->type == 0) {
|
| 2582 |
|
|
/* this might be an antique... check for MMAC label in eeprom */
|
| 2583 |
|
|
if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
|
| 2584 |
|
|
unsigned char checksum = 0;
|
| 2585 |
|
|
for (i =0; i<21; i++)
|
| 2586 |
|
|
checksum += ee[i];
|
| 2587 |
|
|
if (checksum != ee[21])
|
| 2588 |
|
|
return;
|
| 2589 |
|
|
btv->type = BTTV_OSPREY1x0_848;
|
| 2590 |
|
|
for (i = 12; i < 21; i++)
|
| 2591 |
|
|
serial *= 10, serial += ee[i] - '0';
|
| 2592 |
|
|
}
|
| 2593 |
|
|
} else {
|
| 2594 |
|
|
unsigned short type;
|
| 2595 |
|
|
int offset = 4*16;
|
| 2596 |
|
|
|
| 2597 |
|
|
for(; offset < 8*16; offset += 16) {
|
| 2598 |
|
|
unsigned short checksum = 0;
|
| 2599 |
|
|
/* verify the checksum */
|
| 2600 |
|
|
for(i = 0; i<14; i++) checksum += ee[i+offset];
|
| 2601 |
|
|
checksum = ~checksum; /* no idea why */
|
| 2602 |
|
|
if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
|
| 2603 |
|
|
((checksum & 0x0FF) == ee[offset+15])) {
|
| 2604 |
|
|
break;
|
| 2605 |
|
|
}
|
| 2606 |
|
|
}
|
| 2607 |
|
|
|
| 2608 |
|
|
if (offset >= 8*16)
|
| 2609 |
|
|
return;
|
| 2610 |
|
|
|
| 2611 |
|
|
/* found a valid descriptor */
|
| 2612 |
|
|
type = (ee[offset+4]<<8) | (ee[offset+5]);
|
| 2613 |
|
|
|
| 2614 |
|
|
switch(type) {
|
| 2615 |
|
|
|
| 2616 |
|
|
/* 848 based */
|
| 2617 |
|
|
case 0x0004:
|
| 2618 |
|
|
btv->type = BTTV_OSPREY1x0_848;
|
| 2619 |
|
|
break;
|
| 2620 |
|
|
case 0x0005:
|
| 2621 |
|
|
btv->type = BTTV_OSPREY101_848;
|
| 2622 |
|
|
break;
|
| 2623 |
|
|
|
| 2624 |
|
|
/* 878 based */
|
| 2625 |
|
|
case 0x0012:
|
| 2626 |
|
|
case 0x0013:
|
| 2627 |
|
|
btv->type = BTTV_OSPREY1x0;
|
| 2628 |
|
|
break;
|
| 2629 |
|
|
case 0x0014:
|
| 2630 |
|
|
case 0x0015:
|
| 2631 |
|
|
btv->type = BTTV_OSPREY1x1;
|
| 2632 |
|
|
break;
|
| 2633 |
|
|
case 0x0016:
|
| 2634 |
|
|
case 0x0017:
|
| 2635 |
|
|
case 0x0020:
|
| 2636 |
|
|
btv->type = BTTV_OSPREY1x1_SVID;
|
| 2637 |
|
|
break;
|
| 2638 |
|
|
case 0x0018:
|
| 2639 |
|
|
case 0x0019:
|
| 2640 |
|
|
case 0x001E:
|
| 2641 |
|
|
case 0x001F:
|
| 2642 |
|
|
btv->type = BTTV_OSPREY2xx;
|
| 2643 |
|
|
break;
|
| 2644 |
|
|
case 0x001A:
|
| 2645 |
|
|
case 0x001B:
|
| 2646 |
|
|
btv->type = BTTV_OSPREY2x0_SVID;
|
| 2647 |
|
|
break;
|
| 2648 |
|
|
case 0x0040:
|
| 2649 |
|
|
btv->type = BTTV_OSPREY500;
|
| 2650 |
|
|
break;
|
| 2651 |
|
|
case 0x0050:
|
| 2652 |
|
|
case 0x0056:
|
| 2653 |
|
|
btv->type = BTTV_OSPREY540;
|
| 2654 |
|
|
/* bttv_osprey_540_init(btv); */
|
| 2655 |
|
|
break;
|
| 2656 |
|
|
case 0x0060:
|
| 2657 |
|
|
case 0x0070:
|
| 2658 |
|
|
btv->type = BTTV_OSPREY2x0;
|
| 2659 |
|
|
//enable output on select control lines
|
| 2660 |
|
|
btwrite(0x000303, BT848_GPIO_OUT_EN);
|
| 2661 |
|
|
break;
|
| 2662 |
|
|
default:
|
| 2663 |
|
|
/* unknown...leave generic, but get serial # */
|
| 2664 |
|
|
break;
|
| 2665 |
|
|
}
|
| 2666 |
|
|
serial = (ee[offset+6] << 24)
|
| 2667 |
|
|
| (ee[offset+7] << 16)
|
| 2668 |
|
|
| (ee[offset+8] << 8)
|
| 2669 |
|
|
| (ee[offset+9]);
|
| 2670 |
|
|
}
|
| 2671 |
|
|
|
| 2672 |
|
|
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
|
| 2673 |
|
|
btv->nr, btv->type, bttv_tvcards[btv->type].name,serial);
|
| 2674 |
|
|
}
|
| 2675 |
|
|
|
| 2676 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2677 |
|
|
/* AVermedia specific stuff, from bktr_card.c */
|
| 2678 |
|
|
|
| 2679 |
|
|
int tuner_0_table[] = {
|
| 2680 |
|
|
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
|
| 2681 |
|
|
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
|
| 2682 |
|
|
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
|
| 2683 |
|
|
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
|
| 2684 |
|
|
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
|
| 2685 |
|
|
#if 0
|
| 2686 |
|
|
int tuner_0_fm_table[] = {
|
| 2687 |
|
|
PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
|
| 2688 |
|
|
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
|
| 2689 |
|
|
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
|
| 2690 |
|
|
PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
|
| 2691 |
|
|
PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
|
| 2692 |
|
|
#endif
|
| 2693 |
|
|
|
| 2694 |
|
|
int tuner_1_table[] = {
|
| 2695 |
|
|
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
|
| 2696 |
|
|
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
|
| 2697 |
|
|
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
|
| 2698 |
|
|
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
|
| 2699 |
|
|
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
|
| 2700 |
|
|
|
| 2701 |
|
|
static void __devinit avermedia_eeprom(struct bttv *btv)
|
| 2702 |
|
|
{
|
| 2703 |
|
|
int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
|
| 2704 |
|
|
|
| 2705 |
|
|
tuner_make = (eeprom_data[0x41] & 0x7);
|
| 2706 |
|
|
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
|
| 2707 |
|
|
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
|
| 2708 |
|
|
btv->has_remote = (eeprom_data[0x42] & 0x01);
|
| 2709 |
|
|
|
| 2710 |
|
|
if (tuner_make == 0 || tuner_make == 2)
|
| 2711 |
|
|
if(tuner_format <=9)
|
| 2712 |
|
|
tuner = tuner_0_table[tuner_format];
|
| 2713 |
|
|
if (tuner_make == 1)
|
| 2714 |
|
|
if(tuner_format <=9)
|
| 2715 |
|
|
tuner = tuner_1_table[tuner_format];
|
| 2716 |
|
|
|
| 2717 |
|
|
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
|
| 2718 |
|
|
btv->nr,eeprom_data[0x41],eeprom_data[0x42]);
|
| 2719 |
|
|
if(tuner) {
|
| 2720 |
|
|
btv->tuner_type=tuner;
|
| 2721 |
|
|
printk("%d",tuner);
|
| 2722 |
|
|
} else
|
| 2723 |
|
|
printk("Unknown type");
|
| 2724 |
|
|
printk(" radio:%s remote control:%s\n",
|
| 2725 |
|
|
tuner_tv_fm ? "yes" : "no",
|
| 2726 |
|
|
btv->has_remote ? "yes" : "no");
|
| 2727 |
|
|
}
|
| 2728 |
|
|
|
| 2729 |
|
|
/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
|
| 2730 |
|
|
void bttv_tda9880_setnorm(struct bttv *btv, int norm)
|
| 2731 |
|
|
{
|
| 2732 |
|
|
// fix up our card entry
|
| 2733 |
|
|
if(norm==VIDEO_MODE_NTSC) {
|
| 2734 |
|
|
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
|
| 2735 |
|
|
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
|
| 2736 |
|
|
dprintk("bttv_tda9880_setnorm to NTSC\n");
|
| 2737 |
|
|
}
|
| 2738 |
|
|
else {
|
| 2739 |
|
|
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
|
| 2740 |
|
|
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
|
| 2741 |
|
|
dprintk("bttv_tda9880_setnorm to PAL\n");
|
| 2742 |
|
|
}
|
| 2743 |
|
|
// set GPIO according
|
| 2744 |
|
|
btaor(bttv_tvcards[btv->type].audiomux[btv->audio],
|
| 2745 |
|
|
~bttv_tvcards[btv->type].gpiomask, BT848_GPIO_DATA);
|
| 2746 |
|
|
}
|
| 2747 |
|
|
|
| 2748 |
|
|
|
| 2749 |
|
|
/*
|
| 2750 |
|
|
* reset/enable the MSP on some Hauppauge cards
|
| 2751 |
|
|
* Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
|
| 2752 |
|
|
*
|
| 2753 |
|
|
* Hauppauge: pin 5
|
| 2754 |
|
|
* Voodoo: pin 20
|
| 2755 |
|
|
*/
|
| 2756 |
|
|
static void __devinit boot_msp34xx(struct bttv *btv, int pin)
|
| 2757 |
|
|
{
|
| 2758 |
|
|
int mask = (1 << pin);
|
| 2759 |
|
|
|
| 2760 |
|
|
btaor(mask, ~mask, BT848_GPIO_OUT_EN);
|
| 2761 |
|
|
btaor(0, ~mask, BT848_GPIO_DATA);
|
| 2762 |
|
|
udelay(2500);
|
| 2763 |
|
|
btaor(mask, ~mask, BT848_GPIO_DATA);
|
| 2764 |
|
|
if (bttv_gpio)
|
| 2765 |
|
|
bttv_gpio_tracking(btv,"msp34xx");
|
| 2766 |
|
|
|
| 2767 |
|
|
if (bttv_verbose)
|
| 2768 |
|
|
printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
|
| 2769 |
|
|
"init [%d]\n", btv->nr, pin);
|
| 2770 |
|
|
}
|
| 2771 |
|
|
|
| 2772 |
|
|
static void __devinit boot_bt832(struct bttv *btv)
|
| 2773 |
|
|
{
|
| 2774 |
|
|
int outbits,databits,resetbit=0;
|
| 2775 |
|
|
|
| 2776 |
|
|
switch (btv->type) {
|
| 2777 |
|
|
case BTTV_PXELVWPLTVPAK:
|
| 2778 |
|
|
resetbit = 0x400000;
|
| 2779 |
|
|
break;
|
| 2780 |
|
|
case BTTV_MODTEC_205:
|
| 2781 |
|
|
resetbit = 1<<9;
|
| 2782 |
|
|
break;
|
| 2783 |
|
|
default:
|
| 2784 |
|
|
BUG();
|
| 2785 |
|
|
}
|
| 2786 |
|
|
|
| 2787 |
|
|
request_module("bt832");
|
| 2788 |
|
|
bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
|
| 2789 |
|
|
|
| 2790 |
|
|
printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->nr,resetbit);
|
| 2791 |
|
|
btwrite(0, BT848_GPIO_DATA);
|
| 2792 |
|
|
outbits = btread(BT848_GPIO_OUT_EN);
|
| 2793 |
|
|
databits= btread(BT848_GPIO_DATA);
|
| 2794 |
|
|
btwrite(resetbit, BT848_GPIO_OUT_EN);
|
| 2795 |
|
|
udelay(5);
|
| 2796 |
|
|
btwrite(resetbit, BT848_GPIO_DATA);
|
| 2797 |
|
|
udelay(5);
|
| 2798 |
|
|
btwrite(0, BT848_GPIO_DATA);
|
| 2799 |
|
|
udelay(5);
|
| 2800 |
|
|
btwrite(outbits, BT848_GPIO_OUT_EN);
|
| 2801 |
|
|
btwrite(databits, BT848_GPIO_DATA);
|
| 2802 |
|
|
|
| 2803 |
|
|
// bt832 on pixelview changes from i2c 0x8a to 0x88 after
|
| 2804 |
|
|
// being reset as above. So we must follow by this:
|
| 2805 |
|
|
bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
|
| 2806 |
|
|
}
|
| 2807 |
|
|
|
| 2808 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2809 |
|
|
/* Imagenation L-Model PXC200 Framegrabber */
|
| 2810 |
|
|
/* This is basically the same procedure as
|
| 2811 |
|
|
* used by Alessandro Rubini in his pxc200
|
| 2812 |
|
|
* driver, but using BTTV functions */
|
| 2813 |
|
|
|
| 2814 |
|
|
static void __devinit init_PXC200(struct bttv *btv)
|
| 2815 |
|
|
{
|
| 2816 |
|
|
static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
|
| 2817 |
|
|
0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
|
| 2818 |
|
|
0x00 };
|
| 2819 |
|
|
unsigned int i;
|
| 2820 |
|
|
int tmp;
|
| 2821 |
|
|
u32 val;
|
| 2822 |
|
|
|
| 2823 |
|
|
/* Initialise GPIO-connevted stuff */
|
| 2824 |
|
|
btwrite(1<<13,BT848_GPIO_OUT_EN); /* Reset pin only */
|
| 2825 |
|
|
btwrite(0,BT848_GPIO_DATA);
|
| 2826 |
|
|
udelay(3);
|
| 2827 |
|
|
btwrite(1<<13,BT848_GPIO_DATA);
|
| 2828 |
|
|
/* GPIO inputs are pulled up, so no need to drive
|
| 2829 |
|
|
* reset pin any longer */
|
| 2830 |
|
|
btwrite(0,BT848_GPIO_OUT_EN);
|
| 2831 |
|
|
if (bttv_gpio)
|
| 2832 |
|
|
bttv_gpio_tracking(btv,"pxc200");
|
| 2833 |
|
|
|
| 2834 |
|
|
/* we could/should try and reset/control the AD pots? but
|
| 2835 |
|
|
right now we simply turned off the crushing. Without
|
| 2836 |
|
|
this the AGC drifts drifts
|
| 2837 |
|
|
remember the EN is reverse logic -->
|
| 2838 |
|
|
setting BT848_ADC_AGC_EN disable the AGC
|
| 2839 |
|
|
tboult@eecs.lehigh.edu
|
| 2840 |
|
|
*/
|
| 2841 |
|
|
|
| 2842 |
|
|
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
|
| 2843 |
|
|
|
| 2844 |
|
|
/* Initialise MAX517 DAC */
|
| 2845 |
|
|
printk(KERN_INFO "Setting DAC reference voltage level ...\n");
|
| 2846 |
|
|
bttv_I2CWrite(btv,0x5E,0,0x80,1);
|
| 2847 |
|
|
|
| 2848 |
|
|
/* Initialise 12C508 PIC */
|
| 2849 |
|
|
/* The I2CWrite and I2CRead commmands are actually to the
|
| 2850 |
|
|
* same chips - but the R/W bit is included in the address
|
| 2851 |
|
|
* argument so the numbers are different */
|
| 2852 |
|
|
|
| 2853 |
|
|
|
| 2854 |
|
|
printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
|
| 2855 |
|
|
|
| 2856 |
|
|
/* First of all, enable the clock line. This is used in the PXC200-F */
|
| 2857 |
|
|
val = btread(BT848_GPIO_DMA_CTL);
|
| 2858 |
|
|
val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
|
| 2859 |
|
|
btwrite(val, BT848_GPIO_DMA_CTL);
|
| 2860 |
|
|
|
| 2861 |
|
|
/* Then, push to 0 the reset pin long enough to reset the *
|
| 2862 |
|
|
* device same as above for the reset line, but not the same
|
| 2863 |
|
|
* value sent to the GPIO-connected stuff
|
| 2864 |
|
|
* which one is the good one? */
|
| 2865 |
|
|
btwrite( (1<<2), BT848_GPIO_OUT_EN); /* only the reset pin */
|
| 2866 |
|
|
btwrite(0, BT848_GPIO_DATA);
|
| 2867 |
|
|
udelay(10);
|
| 2868 |
|
|
btwrite(1<<2, BT848_GPIO_DATA);
|
| 2869 |
|
|
|
| 2870 |
|
|
for (i = 0; i < ARRAY_SIZE(vals); i++) {
|
| 2871 |
|
|
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
|
| 2872 |
|
|
if (tmp != -1) {
|
| 2873 |
|
|
printk(KERN_INFO
|
| 2874 |
|
|
"I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
|
| 2875 |
|
|
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
|
| 2876 |
|
|
}
|
| 2877 |
|
|
}
|
| 2878 |
|
|
|
| 2879 |
|
|
printk(KERN_INFO "PXC200 Initialised.\n");
|
| 2880 |
|
|
}
|
| 2881 |
|
|
|
| 2882 |
|
|
|
| 2883 |
|
|
/* ----------------------------------------------------------------------- */
|
| 2884 |
|
|
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
|
| 2885 |
|
|
/*
|
| 2886 |
|
|
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
|
| 2887 |
|
|
* This code is placed under the terms of the GNU General Public License
|
| 2888 |
|
|
*
|
| 2889 |
|
|
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
|
| 2890 |
|
|
*/
|
| 2891 |
|
|
|
| 2892 |
|
|
void bus_low(struct bttv *btv, int bit)
|
| 2893 |
|
|
{
|
| 2894 |
|
|
if (btv->mbox_ior) {
|
| 2895 |
|
|
btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
| 2896 |
|
|
BT848_GPIO_DATA);
|
| 2897 |
|
|
udelay(5);
|
| 2898 |
|
|
}
|
| 2899 |
|
|
|
| 2900 |
|
|
btand(~(bit), BT848_GPIO_DATA);
|
| 2901 |
|
|
udelay(5);
|
| 2902 |
|
|
|
| 2903 |
|
|
if (btv->mbox_ior) {
|
| 2904 |
|
|
btand(~(btv->mbox_iow | btv->mbox_csel),
|
| 2905 |
|
|
BT848_GPIO_DATA);
|
| 2906 |
|
|
udelay(5);
|
| 2907 |
|
|
}
|
| 2908 |
|
|
}
|
| 2909 |
|
|
|
| 2910 |
|
|
void bus_high(struct bttv *btv, int bit)
|
| 2911 |
|
|
{
|
| 2912 |
|
|
if (btv->mbox_ior) {
|
| 2913 |
|
|
btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
| 2914 |
|
|
BT848_GPIO_DATA);
|
| 2915 |
|
|
udelay(5);
|
| 2916 |
|
|
}
|
| 2917 |
|
|
|
| 2918 |
|
|
btor((bit), BT848_GPIO_DATA);
|
| 2919 |
|
|
udelay(5);
|
| 2920 |
|
|
|
| 2921 |
|
|
if (btv->mbox_ior) {
|
| 2922 |
|
|
btand(~(btv->mbox_iow | btv->mbox_csel),
|
| 2923 |
|
|
BT848_GPIO_DATA);
|
| 2924 |
|
|
udelay(5);
|
| 2925 |
|
|
}
|
| 2926 |
|
|
}
|
| 2927 |
|
|
|
| 2928 |
|
|
int bus_in(struct bttv *btv, int bit)
|
| 2929 |
|
|
{
|
| 2930 |
|
|
if (btv->mbox_ior) {
|
| 2931 |
|
|
btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
| 2932 |
|
|
BT848_GPIO_DATA);
|
| 2933 |
|
|
udelay(5);
|
| 2934 |
|
|
|
| 2935 |
|
|
btand(~(btv->mbox_ior | btv->mbox_csel),
|
| 2936 |
|
|
BT848_GPIO_DATA);
|
| 2937 |
|
|
udelay(5);
|
| 2938 |
|
|
}
|
| 2939 |
|
|
return btread(BT848_GPIO_DATA) & (bit);
|
| 2940 |
|
|
}
|
| 2941 |
|
|
|
| 2942 |
|
|
/* TEA5757 register bits */
|
| 2943 |
|
|
#define TEA_FREQ 0:14
|
| 2944 |
|
|
#define TEA_BUFFER 15:15
|
| 2945 |
|
|
|
| 2946 |
|
|
#define TEA_SIGNAL_STRENGTH 16:17
|
| 2947 |
|
|
|
| 2948 |
|
|
#define TEA_PORT1 18:18
|
| 2949 |
|
|
#define TEA_PORT0 19:19
|
| 2950 |
|
|
|
| 2951 |
|
|
#define TEA_BAND 20:21
|
| 2952 |
|
|
#define TEA_BAND_FM 0
|
| 2953 |
|
|
#define TEA_BAND_MW 1
|
| 2954 |
|
|
#define TEA_BAND_LW 2
|
| 2955 |
|
|
#define TEA_BAND_SW 3
|
| 2956 |
|
|
|
| 2957 |
|
|
#define TEA_MONO 22:22
|
| 2958 |
|
|
#define TEA_ALLOW_STEREO 0
|
| 2959 |
|
|
#define TEA_FORCE_MONO 1
|
| 2960 |
|
|
|
| 2961 |
|
|
#define TEA_SEARCH_DIRECTION 23:23
|
| 2962 |
|
|
#define TEA_SEARCH_DOWN 0
|
| 2963 |
|
|
#define TEA_SEARCH_UP 1
|
| 2964 |
|
|
|
| 2965 |
|
|
#define TEA_STATUS 24:24
|
| 2966 |
|
|
#define TEA_STATUS_TUNED 0
|
| 2967 |
|
|
#define TEA_STATUS_SEARCHING 1
|
| 2968 |
|
|
|
| 2969 |
|
|
/* Low-level stuff */
|
| 2970 |
|
|
static int tea5757_read(struct bttv *btv)
|
| 2971 |
|
|
{
|
| 2972 |
|
|
unsigned long timeout;
|
| 2973 |
|
|
int value = 0;
|
| 2974 |
|
|
int i;
|
| 2975 |
|
|
|
| 2976 |
|
|
/* better safe than sorry */
|
| 2977 |
|
|
btaor((btv->mbox_clk | btv->mbox_we),
|
| 2978 |
|
|
~btv->mbox_mask, BT848_GPIO_OUT_EN);
|
| 2979 |
|
|
|
| 2980 |
|
|
if (btv->mbox_ior) {
|
| 2981 |
|
|
btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
| 2982 |
|
|
BT848_GPIO_DATA);
|
| 2983 |
|
|
udelay(5);
|
| 2984 |
|
|
}
|
| 2985 |
|
|
|
| 2986 |
|
|
if (bttv_gpio)
|
| 2987 |
|
|
bttv_gpio_tracking(btv,"tea5757 read");
|
| 2988 |
|
|
|
| 2989 |
|
|
bus_low(btv,btv->mbox_we);
|
| 2990 |
|
|
bus_low(btv,btv->mbox_clk);
|
| 2991 |
|
|
|
| 2992 |
|
|
udelay(10);
|
| 2993 |
|
|
timeout= jiffies + HZ;
|
| 2994 |
|
|
|
| 2995 |
|
|
// wait for DATA line to go low; error if it doesn't
|
| 2996 |
|
|
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
|
| 2997 |
|
|
schedule();
|
| 2998 |
|
|
if (bus_in(btv,btv->mbox_data)) {
|
| 2999 |
|
|
printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->nr);
|
| 3000 |
|
|
return -1;
|
| 3001 |
|
|
}
|
| 3002 |
|
|
|
| 3003 |
|
|
dprintk("bttv%d: tea5757:",btv->nr);
|
| 3004 |
|
|
for(i = 0; i < 24; i++)
|
| 3005 |
|
|
{
|
| 3006 |
|
|
udelay(5);
|
| 3007 |
|
|
bus_high(btv,btv->mbox_clk);
|
| 3008 |
|
|
udelay(5);
|
| 3009 |
|
|
dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
|
| 3010 |
|
|
bus_low(btv,btv->mbox_clk);
|
| 3011 |
|
|
value <<= 1;
|
| 3012 |
|
|
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
|
| 3013 |
|
|
dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
|
| 3014 |
|
|
}
|
| 3015 |
|
|
dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->nr, value);
|
| 3016 |
|
|
return value;
|
| 3017 |
|
|
}
|
| 3018 |
|
|
|
| 3019 |
|
|
static int tea5757_write(struct bttv *btv, int value)
|
| 3020 |
|
|
{
|
| 3021 |
|
|
int i;
|
| 3022 |
|
|
int reg = value;
|
| 3023 |
|
|
|
| 3024 |
|
|
btaor(btv->mbox_clk | btv->mbox_we | btv->mbox_data,
|
| 3025 |
|
|
~btv->mbox_mask, BT848_GPIO_OUT_EN);
|
| 3026 |
|
|
|
| 3027 |
|
|
if (btv->mbox_ior) {
|
| 3028 |
|
|
btor(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
| 3029 |
|
|
BT848_GPIO_DATA);
|
| 3030 |
|
|
udelay(5);
|
| 3031 |
|
|
}
|
| 3032 |
|
|
if (bttv_gpio)
|
| 3033 |
|
|
bttv_gpio_tracking(btv,"tea5757 write");
|
| 3034 |
|
|
|
| 3035 |
|
|
dprintk("bttv%d: tea5757: write 0x%X\n", btv->nr, value);
|
| 3036 |
|
|
bus_low(btv,btv->mbox_clk);
|
| 3037 |
|
|
bus_high(btv,btv->mbox_we);
|
| 3038 |
|
|
for(i = 0; i < 25; i++)
|
| 3039 |
|
|
{
|
| 3040 |
|
|
if (reg & 0x1000000)
|
| 3041 |
|
|
bus_high(btv,btv->mbox_data);
|
| 3042 |
|
|
else
|
| 3043 |
|
|
bus_low(btv,btv->mbox_data);
|
| 3044 |
|
|
reg <<= 1;
|
| 3045 |
|
|
bus_high(btv,btv->mbox_clk);
|
| 3046 |
|
|
udelay(10);
|
| 3047 |
|
|
bus_low(btv,btv->mbox_clk);
|
| 3048 |
|
|
udelay(10);
|
| 3049 |
|
|
}
|
| 3050 |
|
|
bus_low(btv,btv->mbox_we); /* unmute !!! */
|
| 3051 |
|
|
return 0;
|
| 3052 |
|
|
}
|
| 3053 |
|
|
|
| 3054 |
|
|
void tea5757_set_freq(struct bttv *btv, unsigned short freq)
|
| 3055 |
|
|
{
|
| 3056 |
|
|
dprintk("tea5757_set_freq %d\n",freq);
|
| 3057 |
|
|
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
|
| 3058 |
|
|
#if 0
|
| 3059 |
|
|
/* breaks Miro PCTV */
|
| 3060 |
|
|
value = tea5757_read(btv);
|
| 3061 |
|
|
dprintk("bttv%d: tea5757 readback=0x%x\n",btv->nr,value);
|
| 3062 |
|
|
#endif
|
| 3063 |
|
|
}
|
| 3064 |
|
|
|
| 3065 |
|
|
|
| 3066 |
|
|
/* ----------------------------------------------------------------------- */
|
| 3067 |
|
|
/* winview */
|
| 3068 |
|
|
|
| 3069 |
|
|
void winview_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3070 |
|
|
{
|
| 3071 |
|
|
/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
|
| 3072 |
|
|
int bits_out, loops, vol, data;
|
| 3073 |
|
|
|
| 3074 |
|
|
if (!set) {
|
| 3075 |
|
|
/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
|
| 3076 |
|
|
v->flags |= VIDEO_AUDIO_VOLUME;
|
| 3077 |
|
|
return;
|
| 3078 |
|
|
}
|
| 3079 |
|
|
|
| 3080 |
|
|
/* 32 levels logarithmic */
|
| 3081 |
|
|
vol = 32 - ((v->volume>>11));
|
| 3082 |
|
|
/* units */
|
| 3083 |
|
|
bits_out = (PT2254_DBS_IN_2>>(vol%5));
|
| 3084 |
|
|
/* tens */
|
| 3085 |
|
|
bits_out |= (PT2254_DBS_IN_10>>(vol/5));
|
| 3086 |
|
|
bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
|
| 3087 |
|
|
data = btread(BT848_GPIO_DATA);
|
| 3088 |
|
|
data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
|
| 3089 |
|
|
WINVIEW_PT2254_STROBE);
|
| 3090 |
|
|
for (loops = 17; loops >= 0 ; loops--) {
|
| 3091 |
|
|
if (bits_out & (1<<loops))
|
| 3092 |
|
|
data |= WINVIEW_PT2254_DATA;
|
| 3093 |
|
|
else
|
| 3094 |
|
|
data &= ~WINVIEW_PT2254_DATA;
|
| 3095 |
|
|
btwrite(data, BT848_GPIO_DATA);
|
| 3096 |
|
|
udelay(5);
|
| 3097 |
|
|
data |= WINVIEW_PT2254_CLK;
|
| 3098 |
|
|
btwrite(data, BT848_GPIO_DATA);
|
| 3099 |
|
|
udelay(5);
|
| 3100 |
|
|
data &= ~WINVIEW_PT2254_CLK;
|
| 3101 |
|
|
btwrite(data, BT848_GPIO_DATA);
|
| 3102 |
|
|
}
|
| 3103 |
|
|
data |= WINVIEW_PT2254_STROBE;
|
| 3104 |
|
|
data &= ~WINVIEW_PT2254_DATA;
|
| 3105 |
|
|
btwrite(data, BT848_GPIO_DATA);
|
| 3106 |
|
|
udelay(10);
|
| 3107 |
|
|
data &= ~WINVIEW_PT2254_STROBE;
|
| 3108 |
|
|
btwrite(data, BT848_GPIO_DATA);
|
| 3109 |
|
|
}
|
| 3110 |
|
|
|
| 3111 |
|
|
/* ----------------------------------------------------------------------- */
|
| 3112 |
|
|
/* mono/stereo control for various cards (which don't use i2c chips but */
|
| 3113 |
|
|
/* connect something to the GPIO pins */
|
| 3114 |
|
|
|
| 3115 |
|
|
static void
|
| 3116 |
|
|
gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3117 |
|
|
{
|
| 3118 |
|
|
unsigned int con = 0;
|
| 3119 |
|
|
|
| 3120 |
|
|
if (set) {
|
| 3121 |
|
|
btor(0x300, BT848_GPIO_OUT_EN);
|
| 3122 |
|
|
if (v->mode & VIDEO_SOUND_LANG1)
|
| 3123 |
|
|
con = 0x000;
|
| 3124 |
|
|
if (v->mode & VIDEO_SOUND_LANG2)
|
| 3125 |
|
|
con = 0x300;
|
| 3126 |
|
|
if (v->mode & VIDEO_SOUND_STEREO)
|
| 3127 |
|
|
con = 0x200;
|
| 3128 |
|
|
// if (v->mode & VIDEO_SOUND_MONO)
|
| 3129 |
|
|
// con = 0x100;
|
| 3130 |
|
|
btaor(con, ~0x300, BT848_GPIO_DATA);
|
| 3131 |
|
|
} else {
|
| 3132 |
|
|
v->mode = VIDEO_SOUND_STEREO |
|
| 3133 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3134 |
|
|
}
|
| 3135 |
|
|
}
|
| 3136 |
|
|
|
| 3137 |
|
|
/*
|
| 3138 |
|
|
* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
|
| 3139 |
|
|
* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
|
| 3140 |
|
|
* 0xdde enables mono and 0xccd enables sap
|
| 3141 |
|
|
*
|
| 3142 |
|
|
* Petr Vandrovec <VANDROVE@vc.cvut.cz>
|
| 3143 |
|
|
* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
|
| 3144 |
|
|
* input/output sound connection, so both must be set for output mode.
|
| 3145 |
|
|
*
|
| 3146 |
|
|
* Looks like it's needed only for the "tvphone", the "tvphone 98"
|
| 3147 |
|
|
* handles this with a tda9840
|
| 3148 |
|
|
*
|
| 3149 |
|
|
*/
|
| 3150 |
|
|
static void
|
| 3151 |
|
|
avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3152 |
|
|
{
|
| 3153 |
|
|
int val = 0;
|
| 3154 |
|
|
|
| 3155 |
|
|
if (set) {
|
| 3156 |
|
|
if (v->mode & VIDEO_SOUND_LANG1) /* SAP */
|
| 3157 |
|
|
val = 0x02;
|
| 3158 |
|
|
if (v->mode & VIDEO_SOUND_STEREO)
|
| 3159 |
|
|
val = 0x01;
|
| 3160 |
|
|
if (val) {
|
| 3161 |
|
|
btaor(val, ~0x03, BT848_GPIO_DATA);
|
| 3162 |
|
|
if (bttv_gpio)
|
| 3163 |
|
|
bttv_gpio_tracking(btv,"avermedia");
|
| 3164 |
|
|
}
|
| 3165 |
|
|
} else {
|
| 3166 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3167 |
|
|
VIDEO_SOUND_LANG1;
|
| 3168 |
|
|
return;
|
| 3169 |
|
|
}
|
| 3170 |
|
|
}
|
| 3171 |
|
|
|
| 3172 |
|
|
/* Lifetec 9415 handling */
|
| 3173 |
|
|
static void
|
| 3174 |
|
|
lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3175 |
|
|
{
|
| 3176 |
|
|
int val = 0;
|
| 3177 |
|
|
|
| 3178 |
|
|
if (btread(BT848_GPIO_DATA) & 0x4000) {
|
| 3179 |
|
|
v->mode = VIDEO_SOUND_MONO;
|
| 3180 |
|
|
return;
|
| 3181 |
|
|
}
|
| 3182 |
|
|
|
| 3183 |
|
|
if (set) {
|
| 3184 |
|
|
if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
|
| 3185 |
|
|
val = 0x0080;
|
| 3186 |
|
|
if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
|
| 3187 |
|
|
val = 0x0880;
|
| 3188 |
|
|
if ((v->mode & VIDEO_SOUND_LANG1) ||
|
| 3189 |
|
|
(v->mode & VIDEO_SOUND_MONO))
|
| 3190 |
|
|
val = 0;
|
| 3191 |
|
|
btaor(val, ~0x0880, BT848_GPIO_DATA);
|
| 3192 |
|
|
if (bttv_gpio)
|
| 3193 |
|
|
bttv_gpio_tracking(btv,"lt9415");
|
| 3194 |
|
|
} else {
|
| 3195 |
|
|
/* autodetect doesn't work with this card :-( */
|
| 3196 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3197 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3198 |
|
|
return;
|
| 3199 |
|
|
}
|
| 3200 |
|
|
}
|
| 3201 |
|
|
|
| 3202 |
|
|
// TDA9821 on TerraTV+ Bt848, Bt878
|
| 3203 |
|
|
static void
|
| 3204 |
|
|
terratv_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3205 |
|
|
{
|
| 3206 |
|
|
unsigned int con = 0;
|
| 3207 |
|
|
|
| 3208 |
|
|
if (set) {
|
| 3209 |
|
|
btor(0x180000, BT848_GPIO_OUT_EN);
|
| 3210 |
|
|
if (v->mode & VIDEO_SOUND_LANG2)
|
| 3211 |
|
|
con = 0x080000;
|
| 3212 |
|
|
if (v->mode & VIDEO_SOUND_STEREO)
|
| 3213 |
|
|
con = 0x180000;
|
| 3214 |
|
|
btaor(con, ~0x180000, BT848_GPIO_DATA);
|
| 3215 |
|
|
if (bttv_gpio)
|
| 3216 |
|
|
bttv_gpio_tracking(btv,"terratv");
|
| 3217 |
|
|
} else {
|
| 3218 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3219 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3220 |
|
|
}
|
| 3221 |
|
|
}
|
| 3222 |
|
|
|
| 3223 |
|
|
static void
|
| 3224 |
|
|
winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3225 |
|
|
{
|
| 3226 |
|
|
unsigned long val = 0;
|
| 3227 |
|
|
|
| 3228 |
|
|
if (set) {
|
| 3229 |
|
|
/*btor (0xc32000, BT848_GPIO_OUT_EN);*/
|
| 3230 |
|
|
if (v->mode & VIDEO_SOUND_MONO) /* Mono */
|
| 3231 |
|
|
val = 0x420000;
|
| 3232 |
|
|
if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
|
| 3233 |
|
|
val = 0x420000;
|
| 3234 |
|
|
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
|
| 3235 |
|
|
val = 0x410000;
|
| 3236 |
|
|
if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
|
| 3237 |
|
|
val = 0x020000;
|
| 3238 |
|
|
if (val) {
|
| 3239 |
|
|
btaor(val, ~0x430000, BT848_GPIO_DATA);
|
| 3240 |
|
|
if (bttv_gpio)
|
| 3241 |
|
|
bttv_gpio_tracking(btv,"winfast2000");
|
| 3242 |
|
|
}
|
| 3243 |
|
|
} else {
|
| 3244 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3245 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3246 |
|
|
}
|
| 3247 |
|
|
}
|
| 3248 |
|
|
|
| 3249 |
|
|
/*
|
| 3250 |
|
|
* Dariusz Kowalewski <darekk@automex.pl>
|
| 3251 |
|
|
* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
|
| 3252 |
|
|
* revision 9B has on-board TDA9874A sound decoder).
|
| 3253 |
|
|
*
|
| 3254 |
|
|
* Note: There are card variants without tda9874a. Forcing the "stereo sound route"
|
| 3255 |
|
|
* will mute this cards.
|
| 3256 |
|
|
*/
|
| 3257 |
|
|
static void
|
| 3258 |
|
|
pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3259 |
|
|
{
|
| 3260 |
|
|
unsigned int val = 0;
|
| 3261 |
|
|
|
| 3262 |
|
|
#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
|
| 3263 |
|
|
if (btv->radio_user)
|
| 3264 |
|
|
return;
|
| 3265 |
|
|
#else
|
| 3266 |
|
|
if (btv->radio)
|
| 3267 |
|
|
return;
|
| 3268 |
|
|
#endif
|
| 3269 |
|
|
|
| 3270 |
|
|
if (set) {
|
| 3271 |
|
|
if (v->mode & VIDEO_SOUND_MONO) {
|
| 3272 |
|
|
val = 0x01;
|
| 3273 |
|
|
}
|
| 3274 |
|
|
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|
| 3275 |
|
|
|| (v->mode & VIDEO_SOUND_STEREO)) {
|
| 3276 |
|
|
val = 0x02;
|
| 3277 |
|
|
}
|
| 3278 |
|
|
if (val) {
|
| 3279 |
|
|
btaor(val, ~0x03, BT848_GPIO_DATA);
|
| 3280 |
|
|
if (bttv_gpio)
|
| 3281 |
|
|
bttv_gpio_tracking(btv,"pvbt878p9b");
|
| 3282 |
|
|
}
|
| 3283 |
|
|
} else {
|
| 3284 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3285 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3286 |
|
|
}
|
| 3287 |
|
|
}
|
| 3288 |
|
|
|
| 3289 |
|
|
/*
|
| 3290 |
|
|
* Dariusz Kowalewski <darekk@automex.pl>
|
| 3291 |
|
|
* sound control for FlyVideo 2000S (with tda9874 decoder)
|
| 3292 |
|
|
* based on pvbt878p9b_audio() - this is not tested, please fix!!!
|
| 3293 |
|
|
*/
|
| 3294 |
|
|
static void
|
| 3295 |
|
|
fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3296 |
|
|
{
|
| 3297 |
|
|
unsigned int val = 0xffff;
|
| 3298 |
|
|
|
| 3299 |
|
|
#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
|
| 3300 |
|
|
if (btv->radio_user)
|
| 3301 |
|
|
return;
|
| 3302 |
|
|
#else
|
| 3303 |
|
|
if (btv->radio)
|
| 3304 |
|
|
return;
|
| 3305 |
|
|
#endif
|
| 3306 |
|
|
if (set) {
|
| 3307 |
|
|
if (v->mode & VIDEO_SOUND_MONO) {
|
| 3308 |
|
|
val = 0x0000;
|
| 3309 |
|
|
}
|
| 3310 |
|
|
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|
| 3311 |
|
|
|| (v->mode & VIDEO_SOUND_STEREO)) {
|
| 3312 |
|
|
val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
|
| 3313 |
|
|
}
|
| 3314 |
|
|
if (val != 0xffff) {
|
| 3315 |
|
|
btaor(val, ~0x1800, BT848_GPIO_DATA);
|
| 3316 |
|
|
if (bttv_gpio)
|
| 3317 |
|
|
bttv_gpio_tracking(btv,"fv2000s");
|
| 3318 |
|
|
}
|
| 3319 |
|
|
} else {
|
| 3320 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3321 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3322 |
|
|
}
|
| 3323 |
|
|
}
|
| 3324 |
|
|
|
| 3325 |
|
|
/*
|
| 3326 |
|
|
* sound control for Canopus WinDVR PCI
|
| 3327 |
|
|
* Masaki Suzuki <masaki@btree.org>
|
| 3328 |
|
|
*/
|
| 3329 |
|
|
static void
|
| 3330 |
|
|
windvr_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3331 |
|
|
{
|
| 3332 |
|
|
unsigned long val = 0;
|
| 3333 |
|
|
|
| 3334 |
|
|
if (set) {
|
| 3335 |
|
|
if (v->mode & VIDEO_SOUND_MONO)
|
| 3336 |
|
|
val = 0x040000;
|
| 3337 |
|
|
if (v->mode & VIDEO_SOUND_LANG1)
|
| 3338 |
|
|
val = 0;
|
| 3339 |
|
|
if (v->mode & VIDEO_SOUND_LANG2)
|
| 3340 |
|
|
val = 0x100000;
|
| 3341 |
|
|
if (v->mode & VIDEO_SOUND_STEREO)
|
| 3342 |
|
|
val = 0;
|
| 3343 |
|
|
if (val) {
|
| 3344 |
|
|
btaor(val, ~0x140000, BT848_GPIO_DATA);
|
| 3345 |
|
|
if (bttv_gpio)
|
| 3346 |
|
|
bttv_gpio_tracking(btv,"windvr");
|
| 3347 |
|
|
}
|
| 3348 |
|
|
} else {
|
| 3349 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3350 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3351 |
|
|
}
|
| 3352 |
|
|
}
|
| 3353 |
|
|
|
| 3354 |
|
|
/*
|
| 3355 |
|
|
* sound control for AD-TVK503
|
| 3356 |
|
|
* Hiroshi Takekawa <sian@big.or.jp>
|
| 3357 |
|
|
*/
|
| 3358 |
|
|
static void
|
| 3359 |
|
|
adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
|
| 3360 |
|
|
{
|
| 3361 |
|
|
unsigned int con = 0xffffff;
|
| 3362 |
|
|
|
| 3363 |
|
|
//btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
|
| 3364 |
|
|
|
| 3365 |
|
|
if (set) {
|
| 3366 |
|
|
//btor(***, BT848_GPIO_OUT_EN);
|
| 3367 |
|
|
if (v->mode & VIDEO_SOUND_LANG1)
|
| 3368 |
|
|
con = 0x00000000;
|
| 3369 |
|
|
if (v->mode & VIDEO_SOUND_LANG2)
|
| 3370 |
|
|
con = 0x00180000;
|
| 3371 |
|
|
if (v->mode & VIDEO_SOUND_STEREO)
|
| 3372 |
|
|
con = 0x00000000;
|
| 3373 |
|
|
if (v->mode & VIDEO_SOUND_MONO)
|
| 3374 |
|
|
con = 0x00060000;
|
| 3375 |
|
|
if (con != 0xffffff) {
|
| 3376 |
|
|
btaor(con, ~0x1e0000, BT848_GPIO_DATA);
|
| 3377 |
|
|
if (bttv_gpio)
|
| 3378 |
|
|
bttv_gpio_tracking(btv, "adtvk503");
|
| 3379 |
|
|
}
|
| 3380 |
|
|
} else {
|
| 3381 |
|
|
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
| 3382 |
|
|
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
| 3383 |
|
|
}
|
| 3384 |
|
|
}
|
| 3385 |
|
|
|
| 3386 |
|
|
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
|
| 3387 |
|
|
*
|
| 3388 |
|
|
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
|
| 3389 |
|
|
* switch instead (CD22M3494E). This IC can have multiple active connections
|
| 3390 |
|
|
* between Xn (input) and Yn (output) pins. We need to clear any existing
|
| 3391 |
|
|
* connection prior to establish a new one, pulsing the STROBE pin.
|
| 3392 |
|
|
*
|
| 3393 |
|
|
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
|
| 3394 |
|
|
* GPIO pins are wired as:
|
| 3395 |
|
|
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
|
| 3396 |
|
|
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
|
| 3397 |
|
|
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
|
| 3398 |
|
|
* GPIO[8] - - P3[5] (microcontroler)
|
| 3399 |
|
|
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
|
| 3400 |
|
|
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
|
| 3401 |
|
|
* GPINTR - - P3[4] (microcontroler)
|
| 3402 |
|
|
*
|
| 3403 |
|
|
* The microcontroler is a 80C32 like. It should be possible to change xpoint
|
| 3404 |
|
|
* configuration either directly (as we are doing) or using the microcontroler
|
| 3405 |
|
|
* which is also wired to I2C interface. I have no further info on the
|
| 3406 |
|
|
* microcontroler features, one would need to disassembly the firmware.
|
| 3407 |
|
|
* note: the vendor refused to give any information on this product, all
|
| 3408 |
|
|
* that stuff was found using a multimeter! :)
|
| 3409 |
|
|
*/
|
| 3410 |
|
|
static void rv605_muxsel(struct bttv *btv, unsigned int input)
|
| 3411 |
|
|
{
|
| 3412 |
|
|
/* reset all conections */
|
| 3413 |
|
|
btaor(0x200,~0x200, BT848_GPIO_DATA);
|
| 3414 |
|
|
mdelay(1);
|
| 3415 |
|
|
btaor(0x000,~0x200, BT848_GPIO_DATA);
|
| 3416 |
|
|
mdelay(1);
|
| 3417 |
|
|
|
| 3418 |
|
|
/* create a new conection */
|
| 3419 |
|
|
btaor(0x080,~0x480, BT848_GPIO_DATA);
|
| 3420 |
|
|
btaor(0x480,~0x480, BT848_GPIO_DATA);
|
| 3421 |
|
|
mdelay(1);
|
| 3422 |
|
|
btaor(0x080,~0x480, BT848_GPIO_DATA);
|
| 3423 |
|
|
mdelay(1);
|
| 3424 |
|
|
}
|
| 3425 |
|
|
|
| 3426 |
|
|
// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
|
| 3427 |
|
|
// video multiplexers to provide up to 16 video inputs. These
|
| 3428 |
|
|
// multiplexers are controlled by the lower 8 GPIO pins of the
|
| 3429 |
|
|
// bt878. The multiplexers probably Pericom PI5V331Q or similar.
|
| 3430 |
|
|
|
| 3431 |
|
|
// xxx0 is pin xxx of multiplexer U5,
|
| 3432 |
|
|
// yyy1 is pin yyy of multiplexer U2
|
| 3433 |
|
|
|
| 3434 |
|
|
#define ENA0 0x01
|
| 3435 |
|
|
#define ENB0 0x02
|
| 3436 |
|
|
#define ENA1 0x04
|
| 3437 |
|
|
#define ENB1 0x08
|
| 3438 |
|
|
|
| 3439 |
|
|
#define IN10 0x10
|
| 3440 |
|
|
#define IN00 0x20
|
| 3441 |
|
|
#define IN11 0x40
|
| 3442 |
|
|
#define IN01 0x80
|
| 3443 |
|
|
|
| 3444 |
|
|
static void xguard_muxsel(struct bttv *btv, unsigned int input)
|
| 3445 |
|
|
{
|
| 3446 |
|
|
static const int masks[] = {
|
| 3447 |
|
|
ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
|
| 3448 |
|
|
ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
|
| 3449 |
|
|
ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
|
| 3450 |
|
|
ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
|
| 3451 |
|
|
};
|
| 3452 |
|
|
btwrite(masks[input%16], BT848_GPIO_DATA);
|
| 3453 |
|
|
}
|
| 3454 |
|
|
|
| 3455 |
|
|
/* ----------------------------------------------------------------------- */
|
| 3456 |
|
|
/* motherboard chipset specific stuff */
|
| 3457 |
|
|
|
| 3458 |
|
|
void __devinit bttv_check_chipset(void)
|
| 3459 |
|
|
{
|
| 3460 |
|
|
int pcipci_fail = 0;
|
| 3461 |
|
|
struct pci_dev *dev = NULL;
|
| 3462 |
|
|
|
| 3463 |
|
|
if (pci_pci_problems & PCIPCI_FAIL)
|
| 3464 |
|
|
pcipci_fail = 1;
|
| 3465 |
|
|
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
|
| 3466 |
|
|
triton1 = 1;
|
| 3467 |
|
|
if (pci_pci_problems & PCIPCI_VSFX)
|
| 3468 |
|
|
vsfx = 1;
|
| 3469 |
|
|
#ifdef PCIPCI_ALIMAGIK
|
| 3470 |
|
|
if (pci_pci_problems & PCIPCI_ALIMAGIK)
|
| 3471 |
|
|
latency = 0x0A;
|
| 3472 |
|
|
#endif
|
| 3473 |
|
|
|
| 3474 |
|
|
#if 0
|
| 3475 |
|
|
/* print which chipset we have */
|
| 3476 |
|
|
while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
|
| 3477 |
|
|
printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
|
| 3478 |
|
|
#endif
|
| 3479 |
|
|
|
| 3480 |
|
|
/* print warnings about any quirks found */
|
| 3481 |
|
|
if (triton1)
|
| 3482 |
|
|
printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
|
| 3483 |
|
|
if (vsfx)
|
| 3484 |
|
|
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
|
| 3485 |
|
|
if (pcipci_fail) {
|
| 3486 |
|
|
printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
|
| 3487 |
|
|
if (UNSET == no_overlay) {
|
| 3488 |
|
|
printk(KERN_WARNING "bttv: going to disable overlay.\n");
|
| 3489 |
|
|
no_overlay = 1;
|
| 3490 |
|
|
}
|
| 3491 |
|
|
}
|
| 3492 |
|
|
if (UNSET != latency)
|
| 3493 |
|
|
printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
|
| 3494 |
|
|
|
| 3495 |
|
|
while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
|
| 3496 |
|
|
PCI_DEVICE_ID_INTEL_82441, dev))) {
|
| 3497 |
|
|
unsigned char b;
|
| 3498 |
|
|
pci_read_config_byte(dev, 0x53, &b);
|
| 3499 |
|
|
if (bttv_debug)
|
| 3500 |
|
|
printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
|
| 3501 |
|
|
"bufcon=0x%02x\n",b);
|
| 3502 |
|
|
}
|
| 3503 |
|
|
}
|
| 3504 |
|
|
|
| 3505 |
|
|
int __devinit bttv_handle_chipset(struct bttv *btv)
|
| 3506 |
|
|
{
|
| 3507 |
|
|
unsigned char command;
|
| 3508 |
|
|
|
| 3509 |
|
|
if (!triton1 && !vsfx && UNSET == latency)
|
| 3510 |
|
|
return 0;
|
| 3511 |
|
|
|
| 3512 |
|
|
if (bttv_verbose) {
|
| 3513 |
|
|
if (triton1)
|
| 3514 |
|
|
printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
|
| 3515 |
|
|
if (vsfx && btv->id >= 878)
|
| 3516 |
|
|
printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
|
| 3517 |
|
|
if (UNSET != latency)
|
| 3518 |
|
|
printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
|
| 3519 |
|
|
btv->nr,latency);
|
| 3520 |
|
|
}
|
| 3521 |
|
|
|
| 3522 |
|
|
if (btv->id < 878) {
|
| 3523 |
|
|
/* bt848 (mis)uses a bit in the irq mask for etbf */
|
| 3524 |
|
|
if (triton1)
|
| 3525 |
|
|
btv->triton1 = BT848_INT_ETBF;
|
| 3526 |
|
|
} else {
|
| 3527 |
|
|
/* bt878 has a bit in the pci config space for it */
|
| 3528 |
|
|
pci_read_config_byte(btv->dev, BT878_DEVCTRL, &command);
|
| 3529 |
|
|
if (triton1)
|
| 3530 |
|
|
command |= BT878_EN_TBFX;
|
| 3531 |
|
|
if (vsfx)
|
| 3532 |
|
|
command |= BT878_EN_VSFX;
|
| 3533 |
|
|
pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
|
| 3534 |
|
|
}
|
| 3535 |
|
|
if (UNSET != latency)
|
| 3536 |
|
|
pci_write_config_byte(btv->dev, PCI_LATENCY_TIMER, latency);
|
| 3537 |
|
|
return 0;
|
| 3538 |
|
|
}
|
| 3539 |
|
|
|
| 3540 |
|
|
|
| 3541 |
|
|
/*
|
| 3542 |
|
|
* Local variables:
|
| 3543 |
|
|
* c-basic-offset: 8
|
| 3544 |
|
|
* End:
|
| 3545 |
|
|
*/
|
