Subversion Repositories or1k

/*      ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard.

 *

 *      Copyright 1996,1997 Jan-Pascal van Best and Andreas Mohr.

 *

 *      This software may be used and distributed according to the terms

 *      of the GNU General Public License, incorporated herein by reference.

 *

 *      The authors may be reached as:

 *              jvbest@wi.leidenuniv.nl         a.mohr@mailto.de

 *      or by snail mail as

 *              Jan-Pascal van Best             Andreas Mohr

 *              Klikspaanweg 58-4               Stauferstr. 6

 *              2324 LZ  Leiden                 D-71272 Renningen

 *              The Netherlands                 Germany

 *

 *      Sources:

 *              Donald Becker's "skeleton.c"

 *              Crynwr ni5010 packet driver

 *

 *      Changes:

 *              v0.0: First test version

 *              v0.1: First working version

 *              v0.2:

 *              v0.3->v0.90: Now demand setting io and irq when loading as module

 *      970430  v0.91: modified for Linux 2.1.14

 *              v0.92: Implemented Andreas' (better) NI5010 probe

 *      970503  v0.93: Fixed auto-irq failure on warm reboot (JB)

 *      970623  v1.00: First kernel version (AM)

 *      970814  v1.01: Added detection of onboard receive buffer size (AM)

 *      Bugs:

 *              - None known...

 *              - Note that you have to patch ifconfig for the new /proc/net/dev

 *              format. It gives incorrect stats otherwise.

 *

 *      To do:

 *              Fix all bugs :-)

 *              Move some stuff to chipset_init()

 *              Handle xmt errors other than collisions

 *              Complete merge with Andreas' driver

 *              Implement ring buffers (Is this useful? You can't squeeze

 *                      too many packet in a 2k buffer!)

 *              Implement DMA (Again, is this useful? Some docs says DMA is

 *                      slower than programmed I/O)

 *

 *      Compile with:

 *              gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ \

 *                      -DMODULE -c ni5010.c

 *

 *      Insert with e.g.:

 *              insmod ni5010.o io=0x300 irq=5

 */

#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/string.h>

#include <linux/errno.h>

#include <linux/ioport.h>

#include <linux/slab.h>

#include <linux/interrupt.h>

#include <linux/delay.h>

#include <linux/init.h>

#include <asm/bitops.h>

#include <asm/io.h>

#include <asm/dma.h>

#include <linux/netdevice.h>

#include <linux/etherdevice.h>

#include <linux/skbuff.h>

#include "ni5010.h"

static const char *boardname = "NI5010";

static char *version =

        "ni5010.c: v1.00 06/23/97 Jan-Pascal van Best and Andreas Mohr\n";

/* bufsize_rcv == 0 means autoprobing */

static unsigned int bufsize_rcv;

#define jumpered_interrupts     /* IRQ line jumpered on board */

#undef jumpered_dma             /* No DMA used */

#undef FULL_IODETECT            /* Only detect in portlist */

#ifndef FULL_IODETECT

/* A zero-terminated list of I/O addresses to be probed. */

static unsigned int ni5010_portlist[] __initdata =

        { 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0 };

#endif

/* Use 0 for production, 1 for verification, >2 for debug */

#ifndef NI5010_DEBUG

#define NI5010_DEBUG 0

#endif

/* Information that needs to be kept for each board. */

struct ni5010_local {

        struct net_device_stats stats;

        int o_pkt_size;

        int i_pkt_size;

};

/* Index to functions, as function prototypes. */

extern int      ni5010_probe(struct net_device *dev);

static int      ni5010_probe1(struct net_device *dev, int ioaddr);

static int      ni5010_open(struct net_device *dev);

static int      ni5010_send_packet(struct sk_buff *skb, struct net_device *dev);

static void     ni5010_interrupt(int irq, void *dev_id, struct pt_regs *regs);

static void     ni5010_rx(struct net_device *dev);

static void     ni5010_timeout(struct net_device *dev);

static int      ni5010_close(struct net_device *dev);

static struct net_device_stats *ni5010_get_stats(struct net_device *dev);

static void     ni5010_set_multicast_list(struct net_device *dev);

static void     reset_receiver(struct net_device *dev);

static int      process_xmt_interrupt(struct net_device *dev);

#define tx_done(dev) 1

static void     hardware_send_packet(struct net_device *dev, char *buf, int length, int pad);

static void     chipset_init(struct net_device *dev, int startp);

static void     dump_packet(void *buf, int len);

static void     ni5010_show_registers(struct net_device *dev);

int __init ni5010_probe(struct net_device *dev)

{

        int *port;

        int base_addr = dev->base_addr;

        PRINTK2((KERN_DEBUG "%s: Entering ni5010_probe\n", dev->name));

        SET_MODULE_OWNER(dev);

        if (base_addr > 0x1ff)          /* Check a single specified location. */

                return ni5010_probe1(dev, base_addr);

        else if (base_addr != 0) /* Don't probe at all. */

                return -ENXIO;

#ifdef FULL_IODETECT

                for (int ioaddr=0x200; ioaddr<0x400; ioaddr+=0x20) {

                        if (check_region(ioaddr, NI5010_IO_EXTENT))

                                continue;

                        if (ni5010_probe1(dev, ioaddr) == 0)

                                return 0;

                }

#else

                for (port = ni5010_portlist; *port; port++) {

                        int ioaddr = *port;

                        if (check_region(ioaddr, NI5010_IO_EXTENT))

                                continue;

                        if (ni5010_probe1(dev, ioaddr) == 0)

                                return 0;

                }

#endif  /* FULL_IODETECT */

        return -ENODEV;

}

static inline int rd_port(int ioaddr)

{

        inb(IE_RBUF);

        return inb(IE_SAPROM);

}

static void __init trigger_irq(int ioaddr)

{

                outb(0x00, EDLC_RESET); /* Clear EDLC hold RESET state */

                outb(0x00, IE_RESET);   /* Board reset */

                outb(0x00, EDLC_XMASK); /* Disable all Xmt interrupts */

                outb(0x00, EDLC_RMASK); /* Disable all Rcv interrupt */

                outb(0xff, EDLC_XCLR);  /* Clear all pending Xmt interrupts */

                outb(0xff, EDLC_RCLR);  /* Clear all pending Rcv interrupts */

                /*

                 * Transmit packet mode: Ignore parity, Power xcvr,

                 *      Enable loopback

                 */

                outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE);

                outb(RMD_BROADCAST, EDLC_RMODE); /* Receive normal&broadcast */

                outb(XM_ALL, EDLC_XMASK);       /* Enable all Xmt interrupts */

                udelay(50);                     /* FIXME: Necessary? */

                outb(MM_EN_XMT|MM_MUX, IE_MMODE); /* Start transmission */

}

/*

 *      This is the real probe routine.  Linux has a history of friendly device

 *      probes on the ISA bus.  A good device probes avoids doing writes, and

 *      verifies that the correct device exists and functions.

 */

static int __init ni5010_probe1(struct net_device *dev, int ioaddr)

{

        static unsigned version_printed;

        int i;

        unsigned int data = 0;

        int boguscount = 40;

        /*

         * This is no "official" probe method, I've rather tested which

         * probe works best with my seven NI5010 cards

         * (they have very different serial numbers)

         * Suggestions or failure reports are very, very welcome !

         * But I think it is a relatively good probe method

         * since it doesn't use any "outb"

         * It should be nearly 100% reliable !

         * well-known WARNING: this probe method (like many others)

         * will hang the system if a NE2000 card region is probed !

         *

         *   - Andreas

         */

        PRINTK2((KERN_DEBUG "%s: entering ni5010_probe1(%#3x)\n",

                dev->name, ioaddr));

        if (inb(ioaddr+0) == 0xff) return -ENODEV;

        while ( (rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr) &

                 rd_port(ioaddr) & rd_port(ioaddr) & rd_port(ioaddr)) != 0xff)

        {

                if (boguscount-- == 0) return -ENODEV;

        }

        PRINTK2((KERN_DEBUG "%s: I/O #1 passed!\n", dev->name));

        for (i=0; i<32; i++)

                if ( (data = rd_port(ioaddr)) != 0xff) break;

        if (data==0xff) return -ENODEV;

        PRINTK2((KERN_DEBUG "%s: I/O #2 passed!\n", dev->name));

        if (            (data == SA_ADDR0) &&

             (rd_port(ioaddr) == SA_ADDR1) &&

             (rd_port(ioaddr) == SA_ADDR2) ) {

                for (i=0; i<4; i++) rd_port(ioaddr);

                if ( (rd_port(ioaddr) != NI5010_MAGICVAL1) ||

                     (rd_port(ioaddr) != NI5010_MAGICVAL2) ) {

                        return -ENODEV;

                }

        } else return -ENODEV;

        PRINTK2((KERN_DEBUG "%s: I/O #3 passed!\n", dev->name));

        if (NI5010_DEBUG && version_printed++ == 0)

                printk(KERN_INFO "%s", version);

        printk("NI5010 ethercard probe at 0x%x: ", ioaddr);

        dev->base_addr = ioaddr;

        for (i=0; i<6; i++) {

                outw(i, IE_GP);

                printk("%2.2x ", dev->dev_addr[i] = inb(IE_SAPROM));

        }

        PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name));

#ifdef jumpered_interrupts

        if (dev->irq == 0xff)

                ;

        else if (dev->irq < 2) {

                PRINTK2((KERN_DEBUG "%s: I/O #5 passed!\n", dev->name));

                autoirq_setup(0);

                trigger_irq(ioaddr);

                dev->irq = autoirq_report(2);

                PRINTK2((KERN_DEBUG "%s: I/O #6 passed!\n", dev->name));

                if (dev->irq == 0) {

                        printk(KERN_WARNING "%s: no IRQ found!\n", dev->name);

                        return -EAGAIN;

                }

                PRINTK2((KERN_DEBUG "%s: I/O #7 passed!\n", dev->name));

        } else if (dev->irq == 2) {

                dev->irq = 9;

        }

#endif  /* jumpered_irq */

        PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name));

        /* DMA is not supported (yet?), so no use detecting it */

        if (dev->priv == NULL) {

                dev->priv = kmalloc(sizeof(struct ni5010_local), GFP_KERNEL|GFP_DMA);

                if (dev->priv == NULL) {

                        printk(KERN_WARNING "%s: Failed to allocate private memory\n", dev->name);

                        return -ENOMEM;

                }

        }

        PRINTK2((KERN_DEBUG "%s: I/O #10 passed!\n", dev->name));

/* get the size of the onboard receive buffer

 * higher addresses than bufsize are wrapped into real buffer

 * i.e. data for offs. 0x801 is written to 0x1 with a 2K onboard buffer

 */

        if (!bufsize_rcv) {

                outb(1, IE_MMODE);      /* Put Rcv buffer on system bus */

                outw(0, IE_GP);          /* Point GP at start of packet */

                outb(0, IE_RBUF);        /* set buffer byte 0 to 0 */

                for (i = 1; i < 0xff; i++) {

                        outw(i << 8, IE_GP); /* Point GP at packet size to be tested */

                        outb(i, IE_RBUF);

                        outw(0x0, IE_GP); /* Point GP at start of packet */

                        data = inb(IE_RBUF);

                        if (data == i) break;

                }

                bufsize_rcv = i << 8;

                outw(0, IE_GP);          /* Point GP at start of packet */

                outb(0, IE_RBUF);        /* set buffer byte 0 to 0 again */

        }

        printk("// bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);

        memset(dev->priv, 0, sizeof(struct ni5010_local));

        /* Grab the region so we can find another board if autoIRQ fails. */

        request_region(ioaddr, NI5010_IO_EXTENT, boardname);

        dev->open               = ni5010_open;

        dev->stop               = ni5010_close;

        dev->hard_start_xmit    = ni5010_send_packet;

        dev->get_stats          = ni5010_get_stats;

        dev->set_multicast_list = ni5010_set_multicast_list;

        dev->tx_timeout         = ni5010_timeout;

        dev->watchdog_timeo     = HZ/20;

        /* Fill in the fields of the device structure with ethernet values. */

        ether_setup(dev);

        dev->flags &= ~IFF_MULTICAST;   /* Multicast doesn't work */

        /* Shut up the ni5010 */

        outb(0, EDLC_RMASK);     /* Mask all receive interrupts */

        outb(0, EDLC_XMASK);     /* Mask all xmit interrupts */

        outb(0xff, EDLC_RCLR);  /* Kill all pending rcv interrupts */

        outb(0xff, EDLC_XCLR);  /* Kill all pending xmt interrupts */

        printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq);

        if (dev->dma) printk(" & DMA %d", dev->dma);

        printk(".\n");

        printk(KERN_INFO "Join the NI5010 driver development team!\n");

        printk(KERN_INFO "Mail to a.mohr@mailto.de or jvbest@wi.leidenuniv.nl\n");

        return 0;

}

/*

 * Open/initialize the board.  This is called (in the current kernel)

 * sometime after booting when the 'ifconfig' program is run.

 *

 * This routine should set everything up anew at each open, even

 * registers that "should" only need to be set once at boot, so that

 * there is non-reboot way to recover if something goes wrong.

 */

static int ni5010_open(struct net_device *dev)

{

        int ioaddr = dev->base_addr;

        int i;

        PRINTK2((KERN_DEBUG "%s: entering ni5010_open()\n", dev->name));

        if (request_irq(dev->irq, &ni5010_interrupt, 0, boardname, dev)) {

                printk(KERN_WARNING "%s: Cannot get irq %#2x\n", dev->name, dev->irq);

                return -EAGAIN;

        }

        PRINTK3((KERN_DEBUG "%s: passed open() #1\n", dev->name));

        /*

         * Always allocate the DMA channel after the IRQ,

         * and clean up on failure.

         */

#ifdef jumpered_dma

        if (request_dma(dev->dma, cardname)) {

                printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma);

                free_irq(dev->irq, NULL);

                return -EAGAIN;

        }

#endif  /* jumpered_dma */

        PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name));

        /* Reset the hardware here.  Don't forget to set the station address. */

        outb(RS_RESET, EDLC_RESET);     /* Hold up EDLC_RESET while configing board */

        outb(0, IE_RESET);               /* Hardware reset of ni5010 board */

        outb(XMD_LBC, EDLC_XMODE);      /* Only loopback xmits */

        PRINTK3((KERN_DEBUG "%s: passed open() #3\n", dev->name));

        /* Set the station address */

        for(i = 0;i < 6; i++) {

                outb(dev->dev_addr[i], EDLC_ADDR + i);

        }

        PRINTK3((KERN_DEBUG "%s: Initialising ni5010\n", dev->name));

        outb(0, EDLC_XMASK);     /* No xmit interrupts for now */

        outb(XMD_IG_PAR | XMD_T_MODE | XMD_LBC, EDLC_XMODE);

                                /* Normal packet xmit mode */

        outb(0xff, EDLC_XCLR);  /* Clear all pending xmit interrupts */

        outb(RMD_BROADCAST, EDLC_RMODE);

                                /* Receive broadcast and normal packets */

        reset_receiver(dev);    /* Ready ni5010 for receiving packets */

        outb(0, EDLC_RESET);     /* Un-reset the ni5010 */

        netif_start_queue(dev);

        if (NI5010_DEBUG) ni5010_show_registers(dev);

        PRINTK((KERN_DEBUG "%s: open successful\n", dev->name));

        return 0;

}

static void reset_receiver(struct net_device *dev)

{

        int ioaddr = dev->base_addr;

        PRINTK3((KERN_DEBUG "%s: resetting receiver\n", dev->name));

        outw(0, IE_GP);          /* Receive packet at start of buffer */

        outb(0xff, EDLC_RCLR);  /* Clear all pending rcv interrupts */

        outb(0, IE_MMODE);       /* Put EDLC to rcv buffer */

        outb(MM_EN_RCV, IE_MMODE); /* Enable rcv */

        outb(0xff, EDLC_RMASK); /* Enable all rcv interrupts */

}

static void ni5010_timeout(struct net_device *dev)

{

        printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,

                   tx_done(dev) ? "IRQ conflict" : "network cable problem");

        /* Try to restart the adaptor. */

        /* FIXME: Give it a real kick here */

        chipset_init(dev, 1);

        dev->trans_start = jiffies;

        netif_wake_queue(dev);

}

static int ni5010_send_packet(struct sk_buff *skb, struct net_device *dev)

{

        int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;

        PRINTK2((KERN_DEBUG "%s: entering ni5010_send_packet\n", dev->name));

        /*

         * Block sending

         */

        netif_stop_queue(dev);

        hardware_send_packet(dev, (unsigned char *)skb->data, skb->len, length-skb->len);

        dev->trans_start = jiffies;

        dev_kfree_skb (skb);

        return 0;

}

/*

 * The typical workload of the driver:

 * Handle the network interface interrupts.

 */

static void  ni5010_interrupt(int irq, void *dev_id, struct pt_regs *regs)

{

        struct net_device *dev = dev_id;

        struct ni5010_local *lp;

        int ioaddr, status;

        int xmit_was_error = 0;

        PRINTK2((KERN_DEBUG "%s: entering ni5010_interrupt\n", dev->name));

        ioaddr = dev->base_addr;

        lp = (struct ni5010_local *)dev->priv;

        status = inb(IE_ISTAT);

        PRINTK3((KERN_DEBUG "%s: IE_ISTAT = %#02x\n", dev->name, status));

        if ((status & IS_R_INT) == 0) ni5010_rx(dev);

        if ((status & IS_X_INT) == 0) {

                xmit_was_error = process_xmt_interrupt(dev);

        }

        if ((status & IS_DMA_INT) == 0) {

                PRINTK((KERN_DEBUG "%s: DMA complete (?)\n", dev->name));

                outb(0, IE_DMA_RST); /* Reset DMA int */

        }

        if (!xmit_was_error)

                reset_receiver(dev);

        return;

}

static void dump_packet(void *buf, int len)

{

        int i;

        printk(KERN_DEBUG "Packet length = %#4x\n", len);

        for (i = 0; i < len; i++){

                if (i % 16 == 0) printk(KERN_DEBUG "%#4.4x", i);

                if (i % 2 == 0) printk(" ");

                printk("%2.2x", ((unsigned char *)buf)[i]);

                if (i % 16 == 15) printk("\n");

        }

        printk("\n");

        return;

}

/* We have a good packet, get it out of the buffer. */

static void ni5010_rx(struct net_device *dev)

{

        struct ni5010_local *lp = (struct ni5010_local *)dev->priv;

        int ioaddr = dev->base_addr;

        unsigned char rcv_stat;

        struct sk_buff *skb;

        PRINTK2((KERN_DEBUG "%s: entering ni5010_rx()\n", dev->name));

        rcv_stat = inb(EDLC_RSTAT);

        PRINTK3((KERN_DEBUG "%s: EDLC_RSTAT = %#2x\n", dev->name, rcv_stat));

        if ( (rcv_stat & RS_VALID_BITS) != RS_PKT_OK) {

                PRINTK((KERN_INFO "%s: receive error.\n", dev->name));

                lp->stats.rx_errors++;

                if (rcv_stat & RS_RUNT) lp->stats.rx_length_errors++;

                if (rcv_stat & RS_ALIGN) lp->stats.rx_frame_errors++;

                if (rcv_stat & RS_CRC_ERR) lp->stats.rx_crc_errors++;

                if (rcv_stat & RS_OFLW) lp->stats.rx_fifo_errors++;

                outb(0xff, EDLC_RCLR); /* Clear the interrupt */

                return;

        }

        outb(0xff, EDLC_RCLR);  /* Clear the interrupt */

        lp->i_pkt_size = inw(IE_RCNT);

        if (lp->i_pkt_size > ETH_FRAME_LEN || lp->i_pkt_size < 10 ) {

                PRINTK((KERN_DEBUG "%s: Packet size error, packet size = %#4.4x\n",

                        dev->name, lp->i_pkt_size));

                lp->stats.rx_errors++;

                lp->stats.rx_length_errors++;

                return;

        }

        /* Malloc up new buffer. */

        skb = dev_alloc_skb(lp->i_pkt_size + 3);

        if (skb == NULL) {

                printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);

                lp->stats.rx_dropped++;

                return;

        }

        skb->dev = dev;

        skb_reserve(skb, 2);

        /* Read packet into buffer */

        outb(MM_MUX, IE_MMODE); /* Rcv buffer to system bus */

        outw(0, IE_GP);  /* Seek to beginning of packet */

        insb(IE_RBUF, skb_put(skb, lp->i_pkt_size), lp->i_pkt_size);

        if (NI5010_DEBUG >= 4)

                dump_packet(skb->data, skb->len);

        skb->protocol = eth_type_trans(skb,dev);

        netif_rx(skb);

        dev->last_rx = jiffies;

        lp->stats.rx_packets++;

        lp->stats.rx_bytes += lp->i_pkt_size;

        PRINTK2((KERN_DEBUG "%s: Received packet, size=%#4.4x\n",

                dev->name, lp->i_pkt_size));

}

static int process_xmt_interrupt(struct net_device *dev)

{

        struct ni5010_local *lp = (struct ni5010_local *)dev->priv;

        int ioaddr = dev->base_addr;

        int xmit_stat;

        PRINTK2((KERN_DEBUG "%s: entering process_xmt_interrupt\n", dev->name));

        xmit_stat = inb(EDLC_XSTAT);

        PRINTK3((KERN_DEBUG "%s: EDLC_XSTAT = %2.2x\n", dev->name, xmit_stat));

        outb(0, EDLC_XMASK);     /* Disable xmit IRQ's */

        outb(0xff, EDLC_XCLR);  /* Clear all pending xmit IRQ's */

        if (xmit_stat & XS_COLL){

                PRINTK((KERN_DEBUG "%s: collision detected, retransmitting\n",

                        dev->name));

                outw(NI5010_BUFSIZE - lp->o_pkt_size, IE_GP);

                /* outb(0, IE_MMODE); */ /* xmt buf on sysbus FIXME: needed ? */

                outb(MM_EN_XMT | MM_MUX, IE_MMODE);

                outb(XM_ALL, EDLC_XMASK); /* Enable xmt IRQ's */

                lp->stats.collisions++;

                return 1;

        }

        /* FIXME: handle other xmt error conditions */

        lp->stats.tx_packets++;

        lp->stats.tx_bytes += lp->o_pkt_size;

        netif_wake_queue(dev);

        PRINTK2((KERN_DEBUG "%s: sent packet, size=%#4.4x\n",

                dev->name, lp->o_pkt_size));

        return 0;

}

/* The inverse routine to ni5010_open(). */

static int ni5010_close(struct net_device *dev)

{

        int ioaddr = dev->base_addr;

        PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name));

#ifdef jumpered_interrupts      

        free_irq(dev->irq, NULL);

#endif

        /* Put card in held-RESET state */

        outb(0, IE_MMODE);

        outb(RS_RESET, EDLC_RESET);

        netif_stop_queue(dev);

        PRINTK((KERN_DEBUG "%s: %s closed down\n", dev->name, boardname));

        return 0;

}

/* Get the current statistics.  This may be called with the card open or

   closed. */

static struct net_device_stats *ni5010_get_stats(struct net_device *dev)

{

        struct ni5010_local *lp = (struct ni5010_local *)dev->priv;

        PRINTK2((KERN_DEBUG "%s: entering ni5010_get_stats\n", dev->name));

        if (NI5010_DEBUG) ni5010_show_registers(dev);

        /* cli(); */

        /* Update the statistics from the device registers. */

        /* We do this in the interrupt handler */

        /* sti(); */

        return &lp->stats;

}

/* Set or clear the multicast filter for this adaptor.

   num_addrs == -1      Promiscuous mode, receive all packets

   num_addrs == 0       Normal mode, clear multicast list

   num_addrs > 0        Multicast mode, receive normal and MC packets, and do

                        best-effort filtering.

*/

static void ni5010_set_multicast_list(struct net_device *dev)

{

        short ioaddr = dev->base_addr;