| 1 |
1275 |
phoenix |
2002-11-29 Tim Waugh
|
| 2 |
|
|
|
| 3 |
|
|
* parport_pc.c: Fix ECP hang on Aladdin card.
|
| 4 |
|
|
|
| 5 |
|
|
2002-04-25 Tim Waugh
|
| 6 |
|
|
|
| 7 |
|
|
* parport_serial.c, parport_pc.c: Move some SIIG cards around.
|
| 8 |
|
|
Patch from Andrey Panin.
|
| 9 |
|
|
|
| 10 |
|
|
2001-12-07 Tim Waugh
|
| 11 |
|
|
|
| 12 |
|
|
* parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
|
| 13 |
|
|
and after probing for ports.
|
| 14 |
|
|
* parport_serial.c (parport_register): Likewise.
|
| 15 |
|
|
|
| 16 |
|
|
2002-01-20 Tim Waugh
|
| 17 |
|
|
|
| 18 |
|
|
* parport_pc.c (parport_pc_compat_write_block_pio,
|
| 19 |
|
|
parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
|
| 20 |
|
|
Use the default implementations if the caller wants to use
|
| 21 |
|
|
O_NONBLOCK.
|
| 22 |
|
|
|
| 23 |
|
|
2002-01-21 Tim Waugh
|
| 24 |
|
|
|
| 25 |
|
|
* daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
|
| 26 |
|
|
work for ECP/EPP modes.
|
| 27 |
|
|
|
| 28 |
|
|
2002-02-25 Tim Waugh
|
| 29 |
|
|
|
| 30 |
|
|
* parport_pc.c: Make sure that priv->ctr_writable includes IntEn
|
| 31 |
|
|
even if IRQ is given as a parameter.
|
| 32 |
|
|
|
| 33 |
|
|
2002-01-13 Niels Kristian Bech Jensen
|
| 34 |
|
|
|
| 35 |
|
|
* parport_pc.c: Change some occurrences of frob_set_mode to
|
| 36 |
|
|
ECR_WRITE. This fixes PLIP.
|
| 37 |
|
|
|
| 38 |
|
|
2002-01-04 Tim Waugh
|
| 39 |
|
|
|
| 40 |
|
|
* share.c (parport_claim_or_block): Sleep interruptibly to prevent
|
| 41 |
|
|
a possible deadlock.
|
| 42 |
|
|
|
| 43 |
|
|
2001-12-07 Damian Gruszka
|
| 44 |
|
|
|
| 45 |
|
|
* parport_pc.c (ECR_WRITE): Define. If there are forbidden bits
|
| 46 |
|
|
in the ECR register for some chips, this will be a useful place to
|
| 47 |
|
|
put that knowledge.
|
| 48 |
|
|
(change_mode): Use ECR_WRITE.
|
| 49 |
|
|
(parport_pc_restore_state): Likewise.
|
| 50 |
|
|
(parport_ECPPS2_supported): Likewise.
|
| 51 |
|
|
(parport_ECPEPP_supported): Likewise.
|
| 52 |
|
|
(irq_probe_EPP): Likewise.
|
| 53 |
|
|
(programmable_irq_support): Likewise.
|
| 54 |
|
|
(programmable_dma_support): Likewise.
|
| 55 |
|
|
(parport_pc_probe_port): Likewise.
|
| 56 |
|
|
|
| 57 |
|
|
(frob_set_mode): New function. Set the mode bits of the ECR.
|
| 58 |
|
|
(get_fifo_residue): Use frob_set_mode.
|
| 59 |
|
|
(parport_pc_ecpepp_read_data): Likewise.
|
| 60 |
|
|
(parport_pc_ecpepp_write_data): Likewise.
|
| 61 |
|
|
(parport_pc_ecpepp_read_addr): Likewise.
|
| 62 |
|
|
(parport_pc_ecpepp_write_addr): Likewise.
|
| 63 |
|
|
(parport_pc_compat_write_block_pio): Likewise.
|
| 64 |
|
|
(parport_pc_ecp_write_block_pio): Likewise.
|
| 65 |
|
|
(parport_ECR_present): Likewise.
|
| 66 |
|
|
(parport_ECP_supported): Likewise.
|
| 67 |
|
|
(parport_EPP_supported): Likewise.
|
| 68 |
|
|
(parport_ECPEPP_supported): Likewise.
|
| 69 |
|
|
(programmable_irq_support): Likewise.
|
| 70 |
|
|
(irq_probe_ECP): Likewise.
|
| 71 |
|
|
(programmable_dma_support): Likewise.
|
| 72 |
|
|
|
| 73 |
|
|
(parport_pc_enable_irq): Only enable interrupts if we know which
|
| 74 |
|
|
IRQ line they will come from.
|
| 75 |
|
|
(parport_pc_init_state): Set nErrIntrEn at initialisation.
|
| 76 |
|
|
(parport_pc_restore_state): Only write writable bits of CTR.
|
| 77 |
|
|
(parport_irq_probe): If no IRQ is found, take ackIntEn out of the
|
| 78 |
|
|
writable bit set.
|
| 79 |
|
|
|
| 80 |
|
|
2001-12-07 Tim Waugh
|
| 81 |
|
|
|
| 82 |
|
|
* parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
|
| 83 |
|
|
(parport_pc_init_state): Only set ackIntEn if we know which IRQ
|
| 84 |
|
|
line the interrupts will come from.
|
| 85 |
|
|
|
| 86 |
|
|
2001-12-07 Tim Waugh
|
| 87 |
|
|
|
| 88 |
|
|
* ieee1284_ops.c (parport_ieee1284_epp_write_addr,
|
| 89 |
|
|
parport_ieee1284_epp_read_addr): Actually do something useful.
|
| 90 |
|
|
|
| 91 |
|
|
2001-12-07 Tim Waugh
|
| 92 |
|
|
|
| 93 |
|
|
* parport_pc.c (dmaval): Don't use DMA by default. It seems to be
|
| 94 |
|
|
too buggy at the moment. Use 'dma=auto' to restore the previous
|
| 95 |
|
|
behaviour.
|
| 96 |
|
|
|
| 97 |
|
|
2001-12-03 Rich Liu
|
| 98 |
|
|
|
| 99 |
|
|
* parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
|
| 100 |
|
|
serial board, not a serial+parallel.
|
| 101 |
|
|
|
| 102 |
|
|
2001-11-30 Niels Kristian Bech Jensen
|
| 103 |
|
|
|
| 104 |
|
|
* parport_pc.c: Fix compiler warning.
|
| 105 |
|
|
|
| 106 |
|
|
2001-12-07 Tim Waugh
|
| 107 |
|
|
|
| 108 |
|
|
* daisy.c (DEBUG): Undefine.
|
| 109 |
|
|
|
| 110 |
|
|
2001-12-06 Tim Waugh
|
| 111 |
|
|
|
| 112 |
|
|
* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
|
| 113 |
|
|
PARPORT_CONTROL_AUTOFD as well. Bug spotted by Joe
|
| 114 |
|
|
.
|
| 115 |
|
|
|
| 116 |
|
|
2001-11-12 Tim Waugh
|
| 117 |
|
|
|
| 118 |
|
|
* parport_pc.c (init_module): Warn when parameters are ignored.
|
| 119 |
|
|
|
| 120 |
|
|
2001-11-01 Damian Gruszka
|
| 121 |
|
|
|
| 122 |
|
|
* parport_serial.c (serial_register): Set base_baud before
|
| 123 |
|
|
calling register_serial.
|
| 124 |
|
|
|
| 125 |
|
|
2001-10-26 Tim Waugh
|
| 126 |
|
|
|
| 127 |
|
|
* parport_pc.c (parport_irq_probe): When ECR programmable IRQ
|
| 128 |
|
|
support fails, generate interrupts using the FIFO even if we don't
|
| 129 |
|
|
want to use the FIFO for real data transfers.
|
| 130 |
|
|
(parport_pc_probe_port): Display the ECR address if we have an
|
| 131 |
|
|
ECR, not just if we will use the FIFO.
|
| 132 |
|
|
|
| 133 |
|
|
2001-10-24 Dave Strauss
|
| 134 |
|
|
|
| 135 |
|
|
* parport_pc.c (parport_pc_compat_write_block_pio,
|
| 136 |
|
|
parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
|
| 137 |
|
|
transfer to finish up.
|
| 138 |
|
|
|
| 139 |
|
|
2001-10-11 Tim Waugh
|
| 140 |
|
|
|
| 141 |
|
|
* parport_pc (sio_ite_8872_probe): New function, submitted by Rich
|
| 142 |
|
|
Liu from ITE. Cleaned up, removed bogus phys_to_virt calls.
|
| 143 |
|
|
|
| 144 |
|
|
2001-10-24 Tim Waugh
|
| 145 |
|
|
|
| 146 |
|
|
* parport_pc.c: Support for AKS AladdinCARD. Patch from
|
| 147 |
|
|
Aladdin Knowledge Systems (Christian Groessler).
|
| 148 |
|
|
|
| 149 |
|
|
2001-10-24 Tim Waugh
|
| 150 |
|
|
|
| 151 |
|
|
* ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
|
| 152 |
|
|
turnaround time.
|
| 153 |
|
|
|
| 154 |
|
|
* ieee1284.c (parport_poll_peripheral): Try a couple of times
|
| 155 |
|
|
first without delaying.
|
| 156 |
|
|
|
| 157 |
|
|
2001-10-10 Tim Waugh
|
| 158 |
|
|
|
| 159 |
|
|
* parport_pc.c: Support for OX16PCI954 PCI card.
|
| 160 |
|
|
|
| 161 |
|
|
2001-10-10 Tim Waugh
|
| 162 |
|
|
|
| 163 |
|
|
* parport_pc.c: Support for OX12PCI840 PCI card (reported by
|
| 164 |
|
|
mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we
|
| 165 |
|
|
just don't trust its ECR).
|
| 166 |
|
|
|
| 167 |
|
|
2001-10-10 Gunther Mayer
|
| 168 |
|
|
|
| 169 |
|
|
* parport_pc.c: Support for AVLAB cards.
|
| 170 |
|
|
|
| 171 |
|
|
2001-10-10 Tim Waugh
|
| 172 |
|
|
|
| 173 |
|
|
* ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
|
| 174 |
|
|
Remember to retry direction switch if it fails. Patch from David
|
| 175 |
|
|
Lambert.
|
| 176 |
|
|
|
| 177 |
|
|
2001-10-08 David C. Hansen
|
| 178 |
|
|
|
| 179 |
|
|
* share.c: Make driverlist_lock and parportlist_lock static.
|
| 180 |
|
|
|
| 181 |
|
|
2001-10-08 Philip Blundell
|
| 182 |
|
|
|
| 183 |
|
|
* parport_pc.c: New modular parameter verbose_logging.
|
| 184 |
|
|
Make port->modes indicate the modes that we are prepared to use,
|
| 185 |
|
|
rather than the modes that are available.
|
| 186 |
|
|
|
| 187 |
|
|
2001-10-07 Tim Waugh
|
| 188 |
|
|
|
| 189 |
|
|
* parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
|
| 190 |
|
|
Kipp Cannon.
|
| 191 |
|
|
|
| 192 |
|
|
2001-10-07 Tim Waugh
|
| 193 |
|
|
|
| 194 |
|
|
* parport_serial.c: Remove NetMos support, since it causes problems
|
| 195 |
|
|
for some people.
|
| 196 |
|
|
|
| 197 |
|
|
2001-08-30 Tim Waugh
|
| 198 |
|
|
|
| 199 |
|
|
* parport_serial.c (parport_serial_pci_probe): Clean-up on partial
|
| 200 |
|
|
registration failure.
|
| 201 |
|
|
|
| 202 |
|
|
2001-08-14 Tim Waugh
|
| 203 |
|
|
|
| 204 |
|
|
* parport_pc.c (parport_pc_init_superio): Allow for more than one
|
| 205 |
|
|
SuperIO device. Patch from Rich Lio (ITE).
|
| 206 |
|
|
|
| 207 |
|
|
2001-08-11 Tim Waugh
|
| 208 |
|
|
|
| 209 |
|
|
* parport_pc.c: Support for Titan Electronics cards.
|
| 210 |
|
|
|
| 211 |
|
|
2001-08-08 Tim Waugh
|
| 212 |
|
|
|
| 213 |
|
|
* share.c (parport_unregister_device): Remove device from wait list
|
| 214 |
|
|
too.
|
| 215 |
|
|
|
| 216 |
|
|
2001-06-20 Tim Waugh
|
| 217 |
|
|
|
| 218 |
|
|
* parport_pc.c: Make 'io_hi=0' work.
|
| 219 |
|
|
|
| 220 |
|
|
2001-05-31 Tim Waugh
|
| 221 |
|
|
|
| 222 |
|
|
* parport_serial.c: New file.
|
| 223 |
|
|
|
| 224 |
|
|
2001-06-05 Tim Waugh
|
| 225 |
|
|
|
| 226 |
|
|
* parport_pc.c (parport_pc_unregister_port): New exported function.
|
| 227 |
|
|
Do the opposite of parport_pc_probe_port.
|
| 228 |
|
|
(cleanup_module): Use it.
|
| 229 |
|
|
|
| 230 |
|
|
2001-05-22 Juan Quintela
|
| 231 |
|
|
|
| 232 |
|
|
* parport_amiga.c: Set printk levels.
|
| 233 |
|
|
* parport_gsc.c: Likewise.
|
| 234 |
|
|
* parport_mfc3.c: Likewise.
|
| 235 |
|
|
* parport_pc.c: Likewise.
|
| 236 |
|
|
* parport_sunbpp.c: Likewise.
|
| 237 |
|
|
* probe.c: Likewise.
|
| 238 |
|
|
* share.c: Likewise.
|
| 239 |
|
|
|
| 240 |
|
|
2001-05-10 Fred Barnes
|
| 241 |
|
|
|
| 242 |
|
|
* parport_pc.c (parport_pc_epp_read_data): added support for
|
| 243 |
|
|
reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
|
| 244 |
|
|
|
| 245 |
|
|
2001-05-07 Fred Barnes
|
| 246 |
|
|
|
| 247 |
|
|
* parport_pc.c (parport_pc_epp_read_data,
|
| 248 |
|
|
parport_pc_epp_write_data, parport_pc_epp_read_addr,
|
| 249 |
|
|
parport_pc_epp_write_addr): support for fast reads/writes using
|
| 250 |
|
|
the PARPORT_EPP_FAST flag.
|
| 251 |
|
|
|
| 252 |
|
|
* ieee1284.c (parport_read, parport_write): added code to handle
|
| 253 |
|
|
software EPP mode (IEEE1284_MODE_EPPSWE). Added code to allow
|
| 254 |
|
|
BYTE mode reverse transfers (previously always went for NIBBLE
|
| 255 |
|
|
mode).
|
| 256 |
|
|
|
| 257 |
|
|
* ieee1284_ops.c (parport_ieee1284_epp_read_data,
|
| 258 |
|
|
parport_ieee1284_epp_write_data): fixed various polarity problems.
|
| 259 |
|
|
Also (theoretically) fixed address versions (.._addr), but no
|
| 260 |
|
|
hardware to test this on.
|
| 261 |
|
|
|
| 262 |
|
|
* parport_pc.h: added parport_dump_state() function for debugging.
|
| 263 |
|
|
Needs to have DEBUG_PARPORT to be defined for it to be included.
|
| 264 |
|
|
|
| 265 |
|
|
2001-05-03 Tim Waugh
|
| 266 |
|
|
|
| 267 |
|
|
* parport_pc.c: Fix the compile problem I introduce from the last
|
| 268 |
|
|
change.
|
| 269 |
|
|
|
| 270 |
|
|
2001-04-20 Paul Gortmaker
|
| 271 |
|
|
|
| 272 |
|
|
* parport_pc.c: Cut down the size quite a bit (more than 4k off
|
| 273 |
|
|
the object, about 1k off the zImage) for the older non-PCI
|
| 274 |
|
|
machines which are typically resource starved anyway...
|
| 275 |
|
|
|
| 276 |
|
|
2001-03-26 R Horn
|
| 277 |
|
|
|
| 278 |
|
|
* parport_pc.c: Some commentary changes.
|
| 279 |
|
|
|
| 280 |
|
|
2001-04-19 Tim Waugh
|
| 281 |
|
|
|
| 282 |
|
|
* parport_pc.c (parport_pc_probe_port): Remove __devinit
|
| 283 |
|
|
attribute. Export unconditionally.
|
| 284 |
|
|
|
| 285 |
|
|
2001-04-14 Jeff Garzik
|
| 286 |
|
|
|
| 287 |
|
|
Merged: 2001-03-30 Tim Waugh
|
| 288 |
|
|
|
| 289 |
|
|
* drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
|
| 290 |
|
|
like everything else with respect to irq= and dma= parameters.
|
| 291 |
|
|
|
| 292 |
|
|
2001-04-08 Tim Waugh
|
| 293 |
|
|
|
| 294 |
|
|
* parport_pc.c (parport_pc_save_state): Read from the soft copy of
|
| 295 |
|
|
the control port.
|
| 296 |
|
|
(parport_pc_restore_state): Update the soft copy of the control
|
| 297 |
|
|
port.
|
| 298 |
|
|
|
| 299 |
|
|
2001-03-26 Tim Waugh
|
| 300 |
|
|
|
| 301 |
|
|
* share.c (parport_find_number, parport_find_base): Trigger
|
| 302 |
|
|
a lowlevel driver load if there are no ports yet.
|
| 303 |
|
|
|
| 304 |
|
|
2001-03-26 Tim Waugh
|
| 305 |
|
|
|
| 306 |
|
|
* parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
|
| 307 |
|
|
check since it seems totally unreliable.
|
| 308 |
|
|
|
| 309 |
|
|
2001-03-02 Tim Waugh
|
| 310 |
|
|
|
| 311 |
|
|
* ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
|
| 312 |
|
|
on timeout. Matches 2.2.x behaviour.
|
| 313 |
|
|
|
| 314 |
|
|
2001-03-02 Andrew Morton
|
| 315 |
|
|
|
| 316 |
|
|
* parport_pc.c (registered_parport): New static variable.
|
| 317 |
|
|
(parport_pc_find_ports): Set it when we register PCI driver.
|
| 318 |
|
|
(init_module): Unregister PCI driver if necessary when we
|
| 319 |
|
|
fail.
|
| 320 |
|
|
|
| 321 |
|
|
2001-03-02 Tim Waugh
|
| 322 |
|
|
|
| 323 |
|
|
* ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
|
| 324 |
|
|
down_trylock to reset the IRQ count. Don't even use sema_init,
|
| 325 |
|
|
because it's not even necessary to reset the count. I can't
|
| 326 |
|
|
remember why we ever did.
|
| 327 |
|
|
|
| 328 |
|
|
2001-01-04 Peter Osterlund
|
| 329 |
|
|
|
| 330 |
|
|
* ieee1284.c (parport_negotiate): Fix missing printk argument.
|
| 331 |
|
|
|
| 332 |
|
|
2001-01-03 Paul Schleger
|
| 333 |
|
|
|
| 334 |
|
|
* probe.c (parse_data): Get rid of trailing blanks in values.
|
| 335 |
|
|
Needed for XEROX XJ8C printer.
|
| 336 |
|
|
|
| 337 |
|
|
2001-01-03 Tim Waugh
|
| 338 |
|
|
|
| 339 |
|
|
* parport_pc.c (parport_pc_probe_port): Say something when probes
|
| 340 |
|
|
are omitted.
|
| 341 |
|
|
|
| 342 |
|
|
2001-01-03 Tim Waugh
|
| 343 |
|
|
|
| 344 |
|
|
* parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
|
| 345 |
|
|
|
| 346 |
|
|
2000-11-21 Tim Waugh
|
| 347 |
|
|
|
| 348 |
|
|
* parport_pc.c (parport_pc_ecp_write_block_pio): Fix
|
| 349 |
|
|
reverse-to-forward logic. Spotted by Roland Kuck
|
| 350 |
|
|
.
|
| 351 |
|
|
|
| 352 |
|
|
2000-09-16 Cesar Eduardo Barros
|
| 353 |
|
|
|
| 354 |
|
|
* parport_pc.c (sio_via_686a_probe): Handle case
|
| 355 |
|
|
where hardware returns 255 for IRQ or DMA.
|
| 356 |
|
|
|
| 357 |
|
|
2000-07-20 Eddie C. Dost
|
| 358 |
|
|
|
| 359 |
|
|
* share.c (attach_driver_chain): attach[i](port) needs to be
|
| 360 |
|
|
replaced by attach[count](port).
|
| 361 |
|
|
|
| 362 |
|
|
2000-07-20 Eddie C. Dost
|
| 363 |
|
|
|
| 364 |
|
|
* daisy.c (add_dev): kmalloc args are in wrong order.
|
| 365 |
|
|
|
| 366 |
|
|
2000-07-12 Tim Waugh
|
| 367 |
|
|
|
| 368 |
|
|
* share.c: Documentation for parport_{get,port}_port,
|
| 369 |
|
|
parport_find_{number,base}.
|
| 370 |
|
|
|
| 371 |
|
|
2000-07-12 Tim Waugh
|
| 372 |
|
|
|
| 373 |
|
|
* share.c (parport_unregister_device): Remove unneeded locking
|
| 374 |
|
|
(test cad==dev).
|
| 375 |
|
|
(parport_claim): Likewise.
|
| 376 |
|
|
(parport_find_number): New function.
|
| 377 |
|
|
|
| 378 |
|
|
2000-07-12 Tim Waugh
|
| 379 |
|
|
|
| 380 |
|
|
* share.c (parport_register_port): Hold the parportlist_lock while
|
| 381 |
|
|
looking for a free parport number.
|
| 382 |
|
|
(parport_register_driver): Make sure that attach can block.
|
| 383 |
|
|
(attach_driver_chain): Likewise.
|
| 384 |
|
|
|
| 385 |
|
|
2000-07-12 Tim Waugh
|
| 386 |
|
|
|
| 387 |
|
|
* share.c (call_driver_chain): Do reference counting things.
|
| 388 |
|
|
(parport_get_port): New function.
|
| 389 |
|
|
(parport_put_port): New function.
|
| 390 |
|
|
(parport_register_port): Initialise reference count to zero.
|
| 391 |
|
|
(parport_unregister_port): Check reference count rather than
|
| 392 |
|
|
driver list to see if we can free the port.
|
| 393 |
|
|
|
| 394 |
|
|
2000-07-12 Tim Waugh
|
| 395 |
|
|
|
| 396 |
|
|
* share.c: Clarifications in doc comments.
|
| 397 |
|
|
|
| 398 |
|
|
2000-07-12 Tim Waugh
|
| 399 |
|
|
|
| 400 |
|
|
* share.c (parport_unregister_port): Fix typo in comment.
|
| 401 |
|
|
|
| 402 |
|
|
2000-07-11 Gunther Mayer
|
| 403 |
|
|
|
| 404 |
|
|
* parport_pc.c: Support for the full range of Timedia cards.
|
| 405 |
|
|
|
| 406 |
|
|
2000-07-08 Tim Waugh
|
| 407 |
|
|
|
| 408 |
|
|
* daisy.c: License block comments as part of parportbook.
|
| 409 |
|
|
* ieee1284.c: Likewise.
|
| 410 |
|
|
* share.c: Likewise.
|
| 411 |
|
|
|
| 412 |
|
|
2000-06-30 Petr Vandrovec
|
| 413 |
|
|
|
| 414 |
|
|
* procfs.c (do_hardware_modes): Generated string can be up to 34
|
| 415 |
|
|
chars long.
|
| 416 |
|
|
|
| 417 |
|
|
2000-06-20 Gunther Mayer
|
| 418 |
|
|
|
| 419 |
|
|
* parport_pc.c (parport_pc_compat_write_block_pio): Warn about
|
| 420 |
|
|
change_mode failures.
|
| 421 |
|
|
(parport_pc_ecp_write_block_pio): Likewise.
|
| 422 |
|
|
(parport_pc_ecp_read_block_pio): Likewise.
|
| 423 |
|
|
|
| 424 |
|
|
2000-06-20 Gunther Mayer
|
| 425 |
|
|
|
| 426 |
|
|
* parport_pc.c (parport_SPP_supported): Warn more about possibly
|
| 427 |
|
|
incorrect parameters.
|
| 428 |
|
|
|
| 429 |
|
|
2000-06-15 Tim Waugh
|
| 430 |
|
|
|
| 431 |
|
|
* parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
|
| 432 |
|
|
for ECP ports, since they can all do hardware accelerated
|
| 433 |
|
|
compatibility mode (I assume).
|
| 434 |
|
|
|
| 435 |
|
|
2000-06-13 Tim Waugh
|
| 436 |
|
|
|
| 437 |
|
|
* parport_pc.c (cleanup_module): Remark about possible bugs.
|
| 438 |
|
|
|
| 439 |
|
|
2000-06-13 Tim Waugh
|
| 440 |
|
|
|
| 441 |
|
|
* procfs.c: Break 'hardware' out into separate files.
|
| 442 |
|
|
|
| 443 |
|
|
2000-05-28 Gunther Mayer
|
| 444 |
|
|
|
| 445 |
|
|
* Fix PCI ID printk for non-superio PCI cards.
|
| 446 |
|
|
|
| 447 |
|
|
2000-05-28 Tim Waugh
|
| 448 |
|
|
|
| 449 |
|
|
* share.c (call_driver_chain): Get the driverlist_lock.
|
| 450 |
|
|
(parport_register_device): Make sure that port->devices always
|
| 451 |
|
|
looks consistent.
|
| 452 |
|
|
(parport_register_driver): Ensure that parport drivers are given
|
| 453 |
|
|
parameters that are valid for the duration of the callback by
|
| 454 |
|
|
locking the portlist against changes.
|
| 455 |
|
|
(parport_unregister_driver): Likewise.
|
| 456 |
|
|
(parport_claim): Don't overwrite flags.
|
| 457 |
|
|
|
| 458 |
|
|
2000-05-28 Tim Waugh
|
| 459 |
|
|
|
| 460 |
|
|
* daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
|
| 461 |
|
|
if the first probe succeeds.
|
| 462 |
|
|
|
| 463 |
|
|
2000-05-16 Tim Waugh
|
| 464 |
|
|
|
| 465 |
|
|
* share.c (parport_claim): Fix SMP race.
|
| 466 |
|
|
|
| 467 |
|
|
2000-05-15 Gunther Mayer
|
| 468 |
|
|
|
| 469 |
|
|
* parport_pc.c (parport_pc_compat_write_block_pio): Check for
|
| 470 |
|
|
timeouts.
|
| 471 |
|
|
(parport_pc_ecp_write_block_pio): Likewise.
|
| 472 |
|
|
(parport_pc_ecp_read_block_pio): Likewise.
|
| 473 |
|
|
|
| 474 |
|
|
2000-05-02 Gunther Mayer
|
| 475 |
|
|
|
| 476 |
|
|
* parport_pc.c: PCI SYBA patch and verbose PCI detection.
|
| 477 |
|
|
|
| 478 |
|
|
2000-05-02 Gunther Mayer
|
| 479 |
|
|
|
| 480 |
|
|
* parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
|
| 481 |
|
|
|
| 482 |
|
|
2000-04-28 Tim Waugh
|
| 483 |
|
|
|
| 484 |
|
|
* ieee1284.c: Short function descriptions can't be multiline.
|
| 485 |
|
|
|
| 486 |
|
|
* daisy.c: Short function descriptions can't be multiline.
|
| 487 |
|
|
|
| 488 |
|
|
2000-04-19 Tim Waugh
|
| 489 |
|
|
|
| 490 |
|
|
* parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
|
| 491 |
|
|
calculation a bit clearer.
|
| 492 |
|
|
|
| 493 |
|
|
* ieee1284.c (parport_negotiate): Turn on data line drivers.
|
| 494 |
|
|
|
| 495 |
|
|
* ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
|
| 496 |
|
|
drivers.
|
| 497 |
|
|
(parport_ieee1284_write_compat): Turn on data line drivers.
|
| 498 |
|
|
|
| 499 |
|
|
* daisy.c (assign_addrs): Turn on data line drivers.
|
| 500 |
|
|
(cpp_mux): Likewise.
|
| 501 |
|
|
(cpp_daisy): Likewise.
|
| 502 |
|
|
|
| 503 |
|
|
2000-04-04 Tim Waugh
|
| 504 |
|
|
|
| 505 |
|
|
* parport_pc.c: Add support for another PCI card.
|
| 506 |
|
|
|
| 507 |
|
|
2000-04-04 Tim Waugh
|
| 508 |
|
|
|
| 509 |
|
|
* daisy.c: Documentation in kernel-doc format.
|
| 510 |
|
|
|
| 511 |
|
|
* ieee1284.c: Likewise.
|
| 512 |
|
|
|
| 513 |
|
|
* share.c: Likewise.
|
| 514 |
|
|
|
| 515 |
|
|
2000-04-01 Tim Waugh
|
| 516 |
|
|
|
| 517 |
|
|
* share.c (parport_register_device): Need to hold the module
|
| 518 |
|
|
reference counts before sleeping.
|
| 519 |
|
|
|
| 520 |
|
|
2000-03-27 Tim Waugh
|
| 521 |
|
|
|
| 522 |
|
|
* parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
|
| 523 |
|
|
when peripheral is trying to send data when we stop listening.
|
| 524 |
|
|
|
| 525 |
|
|
2000-03-22 Tim Waugh
|
| 526 |
|
|
|
| 527 |
|
|
* init.c (parport_setup): Fix return value.
|
| 528 |
|
|
|
| 529 |
|
|
2000-03-21 Tim Waugh
|
| 530 |
|
|
|
| 531 |
|
|
* parport_pc.c (parport_pc_pci_probe): Fix return value; call
|
| 532 |
|
|
pci_enable_device.
|
| 533 |
|
|
|
| 534 |
|
|
2000-03-16 Tim Waugh
|
| 535 |
|
|
|
| 536 |
|
|
* parport_pc.c (parport_ECP_supported): This seems to trigger on
|
| 537 |
|
|
machines that don't have an IRQ conflict; toned down the warning
|
| 538 |
|
|
message accordingly.
|
| 539 |
|
|
|
| 540 |
|
|
2000-03-16 Gunther Mayer
|
| 541 |
|
|
|
| 542 |
|
|
* parport_pc.c (show_parconfig_smsc37c669): Fix typo.
|
| 543 |
|
|
(decode_winbond): More IDs.
|
| 544 |
|
|
(winbond_check): Protect against false positives.
|
| 545 |
|
|
(winbond_check2): Likewise.
|
| 546 |
|
|
(smsc_check): Likewise.
|
| 547 |
|
|
|
| 548 |
|
|
2000-03-15 Tim Waugh
|
| 549 |
|
|
|
| 550 |
|
|
* parport_pc.c (cleanup_module): Don't call pci_unregister_driver
|
| 551 |
|
|
if we didn't call pci_register_driver first.
|
| 552 |
|
|
|
| 553 |
|
|
2000-03-13 Tim Waugh
|
| 554 |
|
|
|
| 555 |
|
|
* parport_pc.c (parport_pc_init): Moved from asm/parport.h.
|
| 556 |
|
|
|
| 557 |
|
|
* Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
|
| 558 |
|
|
|
| 559 |
|
|
* parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
|
| 560 |
|
|
(show_parconfig_winbond): Likewise.
|
| 561 |
|
|
(decode_winbond): Likewise.
|
| 562 |
|
|
(decode_smsc): Likewise.
|
| 563 |
|
|
(winbond_check): Likewise.
|
| 564 |
|
|
(winbond_check2): Likewise.
|
| 565 |
|
|
(smsc_check): Likewise.
|
| 566 |
|
|
(detect_and_report_winbond): Likewise.
|
| 567 |
|
|
(detect_and_report_smsc): Likewise.
|
| 568 |
|
|
(get_superio_dma): Likewise.
|
| 569 |
|
|
(get_superio_irq): Likewise.
|
| 570 |
|
|
(parport_pc_find_isa_ports): New function.
|
| 571 |
|
|
(parport_pc_find_ports): New function.
|
| 572 |
|
|
(init_module): Make superio a config option, not a parameter.
|
| 573 |
|
|
|
| 574 |
|
|
2000-03-10 Tim Waugh
|
| 575 |
|
|
|
| 576 |
|
|
* parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
|
| 577 |
|
|
(decode_winbond): Fix typo.
|
| 578 |
|
|
|
| 579 |
|
|
2000-03-09 Tim Waugh
|
| 580 |
|
|
|
| 581 |
|
|
* parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
|
| 582 |
|
|
probe, so that the MODULE_DEVICE_TABLE is complete.
|
| 583 |
|
|
|
