Subversion Repositories or1k

#ifndef _AHA152X_H

#define _AHA152X_H

/*

 * $Id: aha152x.h,v 1.1.1.1 2004-04-15 02:09:45 phoenix Exp $

 */

#if defined(__KERNEL__)

#include <linux/blk.h>

#include "scsi.h"

#include <asm/io.h>

#include <linux/version.h>

int aha152x_detect(Scsi_Host_Template *);

int aha152x_command(Scsi_Cmnd *);

int aha152x_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));

int aha152x_abort(Scsi_Cmnd *);

int aha152x_release(struct Scsi_Host *shpnt);

int aha152x_device_reset(Scsi_Cmnd *);

int aha152x_bus_reset(Scsi_Cmnd *);

int aha152x_host_reset(Scsi_Cmnd *);

int aha152x_biosparam(Disk *, kdev_t, int*);

int aha152x_proc_info(char *buffer, char **start, off_t offset, int length, int hostno, int inout);

/* number of queueable commands

   (unless we support more than 1 cmd_per_lun this should do) */

#define AHA152X_MAXQUEUE 7

#define AHA152X_REVID "Adaptec 152x SCSI driver; $Revision: 1.1.1.1 $"

/* Initial value of Scsi_Host entry */

#define AHA152X { proc_name:                    "aha152x",              \

                  proc_info:                    aha152x_proc_info,      \

                  name:                         AHA152X_REVID,          \

                  detect:                       aha152x_detect,         \

                  command:                      aha152x_command,        \

                  queuecommand:                 aha152x_queue,          \

                  eh_abort_handler:             aha152x_abort,          \

                  eh_device_reset_handler:      aha152x_device_reset,   \

                  eh_bus_reset_handler:         aha152x_bus_reset,      \

                  eh_host_reset_handler:        aha152x_host_reset,     \

                  release:                      aha152x_release,        \

                  slave_attach:                 0,                       \

                  bios_param:                   aha152x_biosparam,      \

                  can_queue:                    1,                      \

                  this_id:                      7,                      \

                  sg_tablesize:                 SG_ALL,                 \

                  cmd_per_lun:                  1,                      \

                  present:                      0,                       \

                  unchecked_isa_dma:            0,                       \

                  use_clustering:               DISABLE_CLUSTERING,     \

                  use_new_eh_code:              1 }

#endif

/* port addresses */

#define SCSISEQ      (HOSTIOPORT0+0x00)    /* SCSI sequence control */

#define SXFRCTL0     (HOSTIOPORT0+0x01)    /* SCSI transfer control 0 */

#define SXFRCTL1     (HOSTIOPORT0+0x02)    /* SCSI transfer control 1 */

#define SCSISIG      (HOSTIOPORT0+0x03)    /* SCSI signal in/out */

#define SCSIRATE     (HOSTIOPORT0+0x04)    /* SCSI rate control */

#define SELID        (HOSTIOPORT0+0x05)    /* selection/reselection ID */

#define SCSIID       SELID                 /* SCSI ID */

#define SCSIDAT      (HOSTIOPORT0+0x06)    /* SCSI latched data */

#define SCSIBUS      (HOSTIOPORT0+0x07)    /* SCSI data bus */

#define STCNT0       (HOSTIOPORT0+0x08)    /* SCSI transfer count 0 */

#define STCNT1       (HOSTIOPORT0+0x09)    /* SCSI transfer count 1 */

#define STCNT2       (HOSTIOPORT0+0x0a)    /* SCSI transfer count 2 */

#define SSTAT0       (HOSTIOPORT0+0x0b)    /* SCSI interrupt status 0 */

#define SSTAT1       (HOSTIOPORT0+0x0c)    /* SCSI interrupt status 1 */

#define SSTAT2       (HOSTIOPORT0+0x0d)    /* SCSI interrupt status 2 */

#define SCSITEST     (HOSTIOPORT0+0x0e)    /* SCSI test control */

#define SSTAT3       SCSITEST              /* SCSI interrupt status 3 */

#define SSTAT4       (HOSTIOPORT0+0x0f)    /* SCSI status 4 */

#define SIMODE0      (HOSTIOPORT1+0x10)    /* SCSI interrupt mode 0 */

#define SIMODE1      (HOSTIOPORT1+0x11)    /* SCSI interrupt mode 1 */

#define DMACNTRL0    (HOSTIOPORT1+0x12)    /* DMA control 0 */

#define DMACNTRL1    (HOSTIOPORT1+0x13)    /* DMA control 1 */

#define DMASTAT      (HOSTIOPORT1+0x14)    /* DMA status */

#define FIFOSTAT     (HOSTIOPORT1+0x15)    /* FIFO status */

#define DATAPORT     (HOSTIOPORT1+0x16)    /* DATA port */

#define BRSTCNTRL    (HOSTIOPORT1+0x18)    /* burst control */

#define PORTA        (HOSTIOPORT1+0x1a)    /* PORT A */

#define PORTB        (HOSTIOPORT1+0x1b)    /* PORT B */

#define REV          (HOSTIOPORT1+0x1c)    /* revision */

#define STACK        (HOSTIOPORT1+0x1d)    /* stack */

#define TEST         (HOSTIOPORT1+0x1e)    /* test register */

#define IO_RANGE        0x20

/* used in aha152x_porttest */

#define O_PORTA         0x1a               /* PORT A */

#define O_PORTB         0x1b               /* PORT B */

#define O_DMACNTRL1     0x13               /* DMA control 1 */

#define O_STACK         0x1d               /* stack */

/* used in tc1550_porttest */

#define O_TC_PORTA      0x0a               /* PORT A */

#define O_TC_PORTB      0x0b               /* PORT B */

#define O_TC_DMACNTRL1  0x03               /* DMA control 1 */

#define O_TC_STACK      0x0d               /* stack */

/* bits and bitmasks to ports */

/* SCSI sequence control */

#define TEMODEO      0x80

#define ENSELO       0x40

#define ENSELI       0x20

#define ENRESELI     0x10

#define ENAUTOATNO   0x08

#define ENAUTOATNI   0x04

#define ENAUTOATNP   0x02

#define SCSIRSTO     0x01

/* SCSI transfer control 0 */

#define SCSIEN       0x80

#define DMAEN        0x40

#define CH1          0x20

#define CLRSTCNT     0x10

#define SPIOEN       0x08

#define CLRCH1       0x02

/* SCSI transfer control 1 */

#define BITBUCKET    0x80

#define SWRAPEN      0x40

#define ENSPCHK      0x20

#define STIMESEL     0x18    /* mask */

#define STIMESEL_    3

#define ENSTIMER     0x04

#define BYTEALIGN    0x02

/* SCSI signal IN */

#define SIG_CDI          0x80

#define SIG_IOI          0x40

#define SIG_MSGI         0x20

#define SIG_ATNI         0x10

#define SIG_SELI         0x08

#define SIG_BSYI         0x04

#define SIG_REQI         0x02

#define SIG_ACKI         0x01

/* SCSI Phases */

#define P_MASK       (SIG_MSGI|SIG_CDI|SIG_IOI)

#define P_DATAO      (0)

#define P_DATAI      (SIG_IOI)

#define P_CMD        (SIG_CDI)

#define P_STATUS     (SIG_CDI|SIG_IOI)

#define P_MSGO       (SIG_MSGI|SIG_CDI)

#define P_MSGI       (SIG_MSGI|SIG_CDI|SIG_IOI)

/* SCSI signal OUT */

#define SIG_CDO          0x80

#define SIG_IOO          0x40

#define SIG_MSGO         0x20

#define SIG_ATNO         0x10

#define SIG_SELO         0x08

#define SIG_BSYO         0x04

#define SIG_REQO         0x02

#define SIG_ACKO         0x01

/* SCSI rate control */

#define SXFR         0x70    /* mask */

#define SXFR_        4

#define SOFS         0x0f    /* mask */

/* SCSI ID */

#define OID          0x70

#define OID_         4

#define TID          0x07

/* SCSI transfer count */

#define GETSTCNT() ( (GETPORT(STCNT2)<<16) \

                   + (GETPORT(STCNT1)<< 8) \

                   + GETPORT(STCNT0) )

#define SETSTCNT(X) { SETPORT(STCNT2, ((X) & 0xFF0000) >> 16); \

                      SETPORT(STCNT1, ((X) & 0x00FF00) >>  8); \

                      SETPORT(STCNT0, ((X) & 0x0000FF) ); }

/* SCSI interrupt status */

#define TARGET       0x80

#define SELDO        0x40

#define SELDI        0x20

#define SELINGO      0x10

#define SWRAP        0x08

#define SDONE        0x04

#define SPIORDY      0x02

#define DMADONE      0x01

#define SETSDONE     0x80

#define CLRSELDO     0x40

#define CLRSELDI     0x20

#define CLRSELINGO   0x10

#define CLRSWRAP     0x08

#define CLRSDONE     0x04

#define CLRSPIORDY   0x02

#define CLRDMADONE   0x01

/* SCSI status 1 */

#define SELTO        0x80

#define ATNTARG      0x40

#define SCSIRSTI     0x20

#define PHASEMIS     0x10

#define BUSFREE      0x08

#define SCSIPERR     0x04

#define PHASECHG     0x02

#define REQINIT      0x01

#define CLRSELTIMO   0x80

#define CLRATNO      0x40

#define CLRSCSIRSTI  0x20

#define CLRBUSFREE   0x08

#define CLRSCSIPERR  0x04

#define CLRPHASECHG  0x02

#define CLRREQINIT   0x01

/* SCSI status 2 */

#define SOFFSET      0x20

#define SEMPTY       0x10

#define SFULL        0x08

#define SFCNT        0x07    /* mask */

/* SCSI status 3 */

#define SCSICNT      0xf0    /* mask */

#define SCSICNT_     4

#define OFFCNT       0x0f    /* mask */

/* SCSI TEST control */

#define SCTESTU      0x08

#define SCTESTD      0x04

#define STCTEST      0x01

/* SCSI status 4 */

#define SYNCERR      0x04

#define FWERR        0x02

#define FRERR        0x01

#define CLRSYNCERR   0x04

#define CLRFWERR     0x02

#define CLRFRERR     0x01

/* SCSI interrupt mode 0 */

#define ENSELDO      0x40

#define ENSELDI      0x20

#define ENSELINGO    0x10

#define ENSWRAP      0x08

#define ENSDONE      0x04

#define ENSPIORDY    0x02

#define ENDMADONE    0x01

/* SCSI interrupt mode 1 */

#define ENSELTIMO    0x80

#define ENATNTARG    0x40

#define ENSCSIRST    0x20

#define ENPHASEMIS   0x10

#define ENBUSFREE    0x08

#define ENSCSIPERR   0x04

#define ENPHASECHG   0x02

#define ENREQINIT    0x01

/* DMA control 0 */

#define ENDMA        0x80

#define _8BIT        0x40

#define DMA          0x20

#define WRITE_READ   0x08

#define INTEN        0x04

#define RSTFIFO      0x02

#define SWINT        0x01

/* DMA control 1 */

#define PWRDWN       0x80

#define STK          0x07    /* mask */

/* DMA status */

#define ATDONE       0x80

#define WORDRDY      0x40

#define INTSTAT      0x20

#define DFIFOFULL    0x10

#define DFIFOEMP     0x08

/* BURST control */

#define BON          0xf0

#define BOFF         0x0f

/* TEST REGISTER */

#define BOFFTMR      0x40

#define BONTMR       0x20

#define STCNTH       0x10

#define STCNTM       0x08

#define STCNTL       0x04

#define SCSIBLK      0x02

#define DMABLK       0x01

/* On the AHA-152x board PORTA and PORTB contain

   some information about the board's configuration. */

typedef union {

  struct {

    unsigned reserved:2;    /* reserved */

    unsigned tardisc:1;     /* Target disconnect: 0=disabled, 1=enabled */

    unsigned syncneg:1;     /* Initial sync neg: 0=disabled, 1=enabled */

    unsigned msgclasses:2;  /* Message classes

                                 0=#4

                                 1=#0, #1, #2, #3, #4

                                 2=#0, #3, #4

                                 3=#0, #4

                             */

    unsigned boot:1;        /* boot: 0=disabled, 1=enabled */

    unsigned dma:1;         /* Transfer mode: 0=PIO; 1=DMA */

    unsigned id:3;          /* SCSI-id */

    unsigned irq:2;         /* IRQ-Channel: 0,3=12, 1=10, 2=11 */

    unsigned dmachan:2;     /* DMA-Channel: 0=0, 1=5, 2=6, 3=7 */

    unsigned parity:1;      /* SCSI-parity: 1=enabled 0=disabled */

  } fields;

  unsigned short port;

} aha152x_config ;

#define cf_parity     fields.parity

#define cf_dmachan    fields.dmachan

#define cf_irq        fields.irq

#define cf_id         fields.id

#define cf_dma        fields.dma

#define cf_boot       fields.boot

#define cf_msgclasses fields.msgclasses

#define cf_syncneg    fields.syncneg

#define cf_tardisc    fields.tardisc

#define cf_port       port

/* Some macros to manipulate ports and their bits */

#define SETPORT(PORT, VAL)      outb( (VAL), (PORT) )

#define GETPORT(PORT)           inb( PORT )

#define SETBITS(PORT, BITS)     outb( (inb(PORT) | (BITS)), (PORT) )

#define CLRBITS(PORT, BITS)     outb( (inb(PORT) & ~(BITS)), (PORT) )

#define TESTHI(PORT, BITS)      ((inb(PORT) & (BITS)) == (BITS))

#define TESTLO(PORT, BITS)      ((inb(PORT) & (BITS)) == 0)

#define SETRATE(RATE)           SETPORT(SCSIRATE,(RATE) & 0x7f)

#if defined(AHA152X_DEBUG)

enum {

  debug_procinfo  = 0x0001,

  debug_queue     = 0x0002,

  debug_locks     = 0x0004,

  debug_intr      = 0x0008,

  debug_selection = 0x0010,

  debug_msgo      = 0x0020,

  debug_msgi      = 0x0040,

  debug_status    = 0x0080,

  debug_cmd       = 0x0100,

  debug_datai     = 0x0200,

  debug_datao     = 0x0400,

  debug_eh        = 0x0800,

  debug_done      = 0x1000,

  debug_phases    = 0x2000,

};

#endif

#endif /* _AHA152X_H */