Subversion Repositories or1k

void swap_statistics(u8 *p)

{

    u32 y;

    u32 *lp, h_lp;

    u16 *sp, h_sp;

    u8 *bp;

    lp = (u32 *)p;

    sp = ((short *)lp) + 1;         /* Convert Header */

    h_sp = *sp = ntohs(*sp);

    lp++;

    do {

        sp = (u16 *)lp;           /* Convert SubHeader */

        *sp = ntohs(*sp);

        bp = (u8 *) lp;

        y = *(bp + 3);

        lp++;

        for (h_lp = (u32)lp; (u32)lp < h_lp + ((u32)*(bp + 3)); lp++)

            *lp = ntohl(*lp);

    }while ((u32)lp < ((u32)p) + 4 + h_sp);

}

/*

 * eata_set_info

 * buffer : pointer to the data that has been written to the hostfile

 * length : number of bytes written to the hostfile

 * HBA_ptr: pointer to the Scsi_Host struct

 */

int eata_set_info(char *buffer, int length, struct Scsi_Host *HBA_ptr)

{

    int orig_length = length;

    if (length >= 8 && strncmp(buffer, "eata_dma", 8) == 0) {

        buffer += 9;

        length -= 9;

        if(length >= 8 && strncmp(buffer, "latency", 7) == 0) {

            SD(HBA_ptr)->do_latency = TRUE;

            return(orig_length);

        }

        if(length >=10 && strncmp(buffer, "nolatency", 9) == 0) {

            SD(HBA_ptr)->do_latency = FALSE;

            return(orig_length);

        }

        printk("Unknown command:%s length: %d\n", buffer, length);

    } else

        printk("Wrong Signature:%10s\n", buffer);

    return(-EINVAL);

}

/*

 * eata_proc_info

 * inout : decides on the direction of the dataflow and the meaning of the

 *         variables

 * buffer: If inout==FALSE data is being written to it else read from it

 * *start: If inout==FALSE start of the valid data in the buffer

 * offset: If inout==FALSE offset from the beginning of the imaginary file

 *         from which we start writing into the buffer

 * length: If inout==FALSE max number of bytes to be written into the buffer

 *         else number of bytes in the buffer

 */

int eata_proc_info(char *buffer, char **start, off_t offset, int length,

                   int hostno, int inout)

{

    Scsi_Device *scd, *SDev;

    struct Scsi_Host *HBA_ptr;

    Scsi_Request  * scmd;

    char cmnd[MAX_COMMAND_SIZE];

    static u8 buff[512];

    static u8 buff2[512];

    hst_cmd_stat *rhcs, *whcs;

    coco         *cc;

    scsitrans    *st;

    scsimod      *sm;

    hobu         *hb;

    scbu         *sb;

    boty         *bt;

    memco        *mc;

    firm         *fm;

    subinf       *si;

    pcinf        *pi;

    arrlim       *al;

    int i, x;

    int   size, len = 0;

    off_t begin = 0;

    off_t pos = 0;

    scd = NULL;

    HBA_ptr = first_HBA;

    for (i = 1; i <= registered_HBAs; i++) {

        if (HBA_ptr->host_no == hostno)

            break;

        HBA_ptr = SD(HBA_ptr)->next;

    }

    if(inout == TRUE) /* Has data been written to the file ? */

        return(eata_set_info(buffer, length, HBA_ptr));

    if (offset == 0)

        memset(buff, 0, sizeof(buff));

    cc = (coco *)     (buff + 0x148);

    st = (scsitrans *)(buff + 0x164);

    sm = (scsimod *)  (buff + 0x16c);

    hb = (hobu *)     (buff + 0x172);

    sb = (scbu *)     (buff + 0x178);

    bt = (boty *)     (buff + 0x17e);

    mc = (memco *)    (buff + 0x186);

    fm = (firm *)     (buff + 0x18e);

    si = (subinf *)   (buff + 0x196);

    pi = (pcinf *)    (buff + 0x19c);

    al = (arrlim *)   (buff + 0x1a2);

    size = sprintf(buffer+len, "EATA (Extended Attachment) driver version: "

                   "%d.%d%s\n",VER_MAJOR, VER_MINOR, VER_SUB);

    len += size; pos = begin + len;

    size = sprintf(buffer + len, "queued commands:     %10ld\n"

                   "processed interrupts:%10ld\n", queue_counter, int_counter);

    len += size; pos = begin + len;

    size = sprintf(buffer + len, "\nscsi%-2d: HBA %.10s\n",

                   HBA_ptr->host_no, SD(HBA_ptr)->name);

    len += size;

    pos = begin + len;

    size = sprintf(buffer + len, "Firmware revision: v%s\n",

                   SD(HBA_ptr)->revision);

    len += size;

    pos = begin + len;

    size = sprintf(buffer + len, "Hardware Configuration:\n");

    len += size;

    pos = begin + len;

    if(SD(HBA_ptr)->broken_INQUIRY == TRUE) {

        if (HBA_ptr->dma_channel == BUSMASTER)

            size = sprintf(buffer + len, "DMA: BUSMASTER\n");

        else

            size = sprintf(buffer + len, "DMA: %d\n", HBA_ptr->dma_channel);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "Base IO : %#.4x\n", (u32) HBA_ptr->base);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "Host Bus: EISA\n");

        len += size;

        pos = begin + len;

    } else {

        SDev = scsi_get_host_dev(HBA_ptr);

        if(SDev == NULL)

            return -ENOMEM;

        scmd  = scsi_allocate_request(SDev);

        if(scmd == NULL)

        {

            scsi_free_host_dev(SDev);

            return -ENOMEM;

        }

        cmnd[0] = LOG_SENSE;

        cmnd[1] = 0;

        cmnd[2] = 0x33 + (3<<6);

        cmnd[3] = 0;

        cmnd[4] = 0;

        cmnd[5] = 0;

        cmnd[6] = 0;

        cmnd[7] = 0x00;

        cmnd[8] = 0x66;

        cmnd[9] = 0;

        scmd->sr_cmd_len = 10;

        scmd->sr_data_direction = SCSI_DATA_READ;

        /*

         * Do the command and wait for it to finish.

         */

        scsi_wait_req (scmd, cmnd, buff + 0x144, 0x66,

                       1 * HZ, 1);

        size = sprintf(buffer + len, "IRQ: %2d, %s triggered\n", cc->interrupt,

                       (cc->intt == TRUE)?"level":"edge");

        len += size;

        pos = begin + len;

        if (HBA_ptr->dma_channel == 0xff)

            size = sprintf(buffer + len, "DMA: BUSMASTER\n");

        else

            size = sprintf(buffer + len, "DMA: %d\n", HBA_ptr->dma_channel);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "CPU: MC680%02d %dMHz\n", bt->cpu_type,

                       bt->cpu_speed);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "Base IO : %#.4x\n", (u32) HBA_ptr->base);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "Host Bus: %s\n",

                       (SD(HBA_ptr)->bustype == IS_PCI)?"PCI ":

                       (SD(HBA_ptr)->bustype == IS_EISA)?"EISA":"ISA ");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "SCSI Bus:%s%s Speed: %sMB/sec. %s\n",

                       (sb->wide == TRUE)?" WIDE":"",

                       (sb->dif == TRUE)?" DIFFERENTIAL":"",

                       (sb->speed == 0)?"5":(sb->speed == 1)?"10":"20",

                       (sb->ext == TRUE)?"With external cable detection":"");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "SCSI channel expansion Module: %s present\n",

                       (bt->sx1 == TRUE)?"SX1 (one channel)":

                       ((bt->sx2 == TRUE)?"SX2 (two channels)":"not"));

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "SmartRAID hardware: %spresent.\n",

                       (cc->srs == TRUE)?"":"not ");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "    Type: %s\n",

                       ((cc->key == TRUE)?((bt->dmi == TRUE)?"integrated"

                                           :((bt->dm4 == TRUE)?"DM401X"

                                           :(bt->dm4k == TRUE)?"DM4000"

                                           :"-"))

                                           :"-"));

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "    Max array groups:              %d\n",

                       (al->code == 0x0e)?al->max_groups:7);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "    Max drives per RAID 0 array:   %d\n",

                       (al->code == 0x0e)?al->raid0_drv:7);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "    Max drives per RAID 3/5 array: %d\n",

                       (al->code == 0x0e)?al->raid35_drv:7);

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "Cache Module: %spresent.\n",

                       (cc->csh)?"":"not ");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "    Type: %s\n",

                       ((cc->csh == TRUE)?((bt->cmi == TRUE)?"integrated"

                                         :((bt->cm4 == TRUE)?"CM401X"

                                         :((bt->cm4k == TRUE)?"CM4000"

                                         :"-")))

                                         :"-"));

        len += size;

        pos = begin + len;

        for (x = 0; x <= 3; x++) {

            size = sprintf(buffer + len, "    Bank%d: %dMB with%s ECC\n",x,

                           mc->banksize[x] & 0x7f,

                           (mc->banksize[x] & 0x80)?"":"out");

            len += size;

            pos = begin + len;

        }

        size = sprintf(buffer + len, "Timer Mod.: %spresent\n",

                       (cc->tmr == TRUE)?"":"not ");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "NVRAM     : %spresent\n",

                       (cc->nvr == TRUE)?"":"not ");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "SmartROM  : %sabled\n",

                       (bt->srom == TRUE)?"dis":"en");

        len += size;

        pos = begin + len;

        size = sprintf(buffer + len, "Alarm     : %s\n",

                       (bt->alrm == TRUE)?"on":"off");

        len += size;

        pos = begin + len;

        if (pos < offset) {

            len = 0;

            begin = pos;

        }

        if (pos > offset + length)

            goto stop_output;

        if(SD(HBA_ptr)->do_latency == FALSE) {

            cmnd[0] = LOG_SENSE;

            cmnd[1] = 0;

            cmnd[2] = 0x32 + (3<<6);

            cmnd[3] = 0;

            cmnd[4] = 0;

            cmnd[5] = 0;

            cmnd[6] = 0;

            cmnd[7] = 0x01;

            cmnd[8] = 0x44;

            cmnd[9] = 0;

            scmd->sr_cmd_len = 10;

            scmd->sr_data_direction = SCSI_DATA_READ;

            /*

             * Do the command and wait for it to finish.

             */

            scsi_wait_req (scmd, cmnd, buff2, 0x144,

                           1 * HZ, 1);

            swap_statistics(buff2);

            rhcs = (hst_cmd_stat *)(buff2 + 0x2c);

            whcs = (hst_cmd_stat *)(buff2 + 0x8c);

            for (x = 0; x <= 11; x++) {

                SD(HBA_ptr)->reads[x] += rhcs->sizes[x];

                SD(HBA_ptr)->writes[x] += whcs->sizes[x];

                SD(HBA_ptr)->reads[12] += rhcs->sizes[x];

                SD(HBA_ptr)->writes[12] += whcs->sizes[x];

            }

            size = sprintf(buffer + len, "Host<->Disk command statistics:\n"

                           "         Reads:          Writes:\n");

            len += size;

            pos = begin + len;

            for (x = 0; x <= 10; x++) {

                size = sprintf(buffer+len,"%5dk:%12u %12u\n", 1 << x,

                               SD(HBA_ptr)->reads[x],

                               SD(HBA_ptr)->writes[x]);

                len += size;

                pos = begin + len;

            }

            size = sprintf(buffer+len,">1024k:%12u %12u\n",

                           SD(HBA_ptr)->reads[11],

                           SD(HBA_ptr)->writes[11]);

            len += size;

            pos = begin + len;

            size = sprintf(buffer+len,"Sum   :%12u %12u\n",

                           SD(HBA_ptr)->reads[12],

                           SD(HBA_ptr)->writes[12]);

            len += size;

            pos = begin + len;

        }

        scsi_release_request(scmd);

        scsi_free_host_dev(SDev);

    }

    if (pos < offset) {

        len = 0;

        begin = pos;

    }

    if (pos > offset + length)

        goto stop_output;

    if(SD(HBA_ptr)->do_latency == TRUE) {

        int factor = 1024/HZ;

        size = sprintf(buffer + len, "Host Latency Command Statistics:\n"

                       "Current timer resolution: %2dms\n"

                       "         Reads:       Min:(ms)     Max:(ms)     Ave:(ms)\n",

                       factor);

        len += size;

        pos = begin + len;

        for (x = 0; x <= 10; x++) {

            size = sprintf(buffer+len,"%5dk:%12u %12u %12u %12u\n",

                           1 << x,

                           SD(HBA_ptr)->reads_lat[x][0],

                           (SD(HBA_ptr)->reads_lat[x][1] == 0xffffffff)

                           ? 0:(SD(HBA_ptr)->reads_lat[x][1] * factor),

                           SD(HBA_ptr)->reads_lat[x][2] * factor,

                           SD(HBA_ptr)->reads_lat[x][3] * factor /

                           ((SD(HBA_ptr)->reads_lat[x][0])

                            ? SD(HBA_ptr)->reads_lat[x][0]:1));

            len += size;

            pos = begin + len;

        }

        size = sprintf(buffer+len,">1024k:%12u %12u %12u %12u\n",

                           SD(HBA_ptr)->reads_lat[11][0],

                           (SD(HBA_ptr)->reads_lat[11][1] == 0xffffffff)

                           ? 0:(SD(HBA_ptr)->reads_lat[11][1] * factor),

                           SD(HBA_ptr)->reads_lat[11][2] * factor,

                           SD(HBA_ptr)->reads_lat[11][3] * factor /

                           ((SD(HBA_ptr)->reads_lat[x][0])

                            ? SD(HBA_ptr)->reads_lat[x][0]:1));

        len += size;

        pos = begin + len;

        if (pos < offset) {

            len = 0;

            begin = pos;

        }

        if (pos > offset + length)

            goto stop_output;

        size = sprintf(buffer + len,

                       "         Writes:      Min:(ms)     Max:(ms)     Ave:(ms)\n");

        len += size;

        pos = begin + len;

        for (x = 0; x <= 10; x++) {

            size = sprintf(buffer+len,"%5dk:%12u %12u %12u %12u\n",

                           1 << x,

                           SD(HBA_ptr)->writes_lat[x][0],

                           (SD(HBA_ptr)->writes_lat[x][1] == 0xffffffff)

                           ? 0:(SD(HBA_ptr)->writes_lat[x][1] * factor),

                           SD(HBA_ptr)->writes_lat[x][2] * factor,

                           SD(HBA_ptr)->writes_lat[x][3] * factor /

                           ((SD(HBA_ptr)->writes_lat[x][0])

                            ? SD(HBA_ptr)->writes_lat[x][0]:1));

            len += size;

            pos = begin + len;

        }

        size = sprintf(buffer+len,">1024k:%12u %12u %12u %12u\n",

                           SD(HBA_ptr)->writes_lat[11][0],

                           (SD(HBA_ptr)->writes_lat[11][1] == 0xffffffff)

                           ? 0:(SD(HBA_ptr)->writes_lat[x][1] * factor),

                           SD(HBA_ptr)->writes_lat[11][2] * factor,

                           SD(HBA_ptr)->writes_lat[11][3] * factor /

                           ((SD(HBA_ptr)->writes_lat[x][0])

                            ? SD(HBA_ptr)->writes_lat[x][0]:1));

        len += size;

        pos = begin + len;

        if (pos < offset) {

            len = 0;

            begin = pos;

        }

        if (pos > offset + length)

            goto stop_output;

    }

    size = sprintf(buffer+len,"Attached devices: %s\n",

                   (HBA_ptr->host_queue)?"":"none");

    len += size;

    pos = begin + len;

    for(scd = HBA_ptr->host_queue; scd; scd = scd->next) {

            proc_print_scsidevice(scd, buffer, &size, len);

            len += size;

            pos = begin + len;

            if (pos < offset) {

                len = 0;

                begin = pos;

            }

            if (pos > offset + length)

                goto stop_output;

    }

 stop_output:

    DBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len));

    *start=buffer+(offset-begin);   /* Start of wanted data */

    len-=(offset-begin);            /* Start slop */

    if(len>length)

        len = length;               /* Ending slop */

    DBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len));

    return (len);

}

/*

 * Overrides for Emacs so that we follow Linus's tabbing style.

 * Emacs will notice this stuff at the end of the file and automatically

 * adjust the settings for this buffer only.  This must remain at the end

 * of the file.

 * ---------------------------------------------------------------------------

 * Local variables:

 * c-indent-level: 4

 * c-brace-imaginary-offset: 0

 * c-brace-offset: -4

 * c-argdecl-indent: 4

 * c-label-offset: -4

 * c-continued-statement-offset: 4

 * c-continued-brace-offset: 0

 * tab-width: 8

 * End:

 */