Subversion Repositories or1k

/**************************************************************************

 * Initio 9100 device driver for Linux.

 *

 * Copyright (c) 1994-1998 Initio Corporation

 * All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2, or (at your option)

 * any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; see the file COPYING.  If not, write to

 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

 *

 * --------------------------------------------------------------------------

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions

 * are met:

 * 1. Redistributions of source code must retain the above copyright

 *    notice, this list of conditions, and the following disclaimer,

 *    without modification, immediately at the beginning of the file.

 * 2. Redistributions in binary form must reproduce the above copyright

 *    notice, this list of conditions and the following disclaimer in the

 *    documentation and/or other materials provided with the distribution.

 * 3. The name of the author may not be used to endorse or promote products

 *    derived from this software without specific prior written permission.

 *

 * Where this Software is combined with software released under the terms of

 * the GNU General Public License ("GPL") and the terms of the GPL would require the

 * combined work to also be released under the terms of the GPL, the terms

 * and conditions of this License will apply in addition to those of the

 * GPL with the exception of any terms or conditions of this License that

 * conflict with, or are expressly prohibited by, the GPL.

 *

 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND

 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR

 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

 * SUCH DAMAGE.

 *

 *************************************************************************

 *

 * Module: ini9100u.h

 * Description: INI-9100U/UW LINUX device driver header

 * Revision History:

 * 06/18/96 Harry Chen, Initial Version 1.00A (Beta)

 * 06/23/98 hc  - v1.01k

 *              - Get it work for kernel version >= 2.1.75

 * 12/09/98 bv  - v1.03a

 *              - Removed unused code

 * 12/13/98 bv  - v1.03b

 *              - Add spinlocks to HCS structure.

 * 21/01/99 bv  - v1.03e

 *              - Added PCI_ID structure

 **************************************************************************/

#ifndef CVT_LINUX_VERSION

#define CVT_LINUX_VERSION(V,P,S)        (((V) * 65536) + ((P) * 256) + (S))

#endif

#ifndef LINUX_VERSION_CODE

#include <linux/version.h>

#endif

#include <linux/types.h>

#include "sd.h"

extern int i91u_detect(Scsi_Host_Template *);

extern int i91u_release(struct Scsi_Host *);

extern int i91u_command(Scsi_Cmnd *);

extern int i91u_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));

extern int i91u_abort(Scsi_Cmnd *);

extern int i91u_reset(Scsi_Cmnd *, unsigned int);

extern int i91u_biosparam(Scsi_Disk *, kdev_t, int *);  /*for linux v2.0 */

#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g"

#define INI9100U        { \

        next:           NULL,                                           \

        module:         NULL,                                           \

        proc_name:      "INI9100U", \

        proc_info:      NULL,                           \

        name:           i91u_REVID, \

        detect:         i91u_detect, \

        release:        i91u_release, \

        info:           NULL,                                   \

        command:        i91u_command, \

        queuecommand:   i91u_queue, \

        eh_strategy_handler: NULL, \

        eh_abort_handler: NULL, \

        eh_device_reset_handler: NULL, \

        eh_bus_reset_handler: NULL, \

        eh_host_reset_handler: NULL, \

        abort:          i91u_abort, \

        reset:          i91u_reset, \

        slave_attach:   NULL, \

        bios_param:     i91u_biosparam, \

        can_queue:      1, \

        this_id:        1, \

        sg_tablesize:   SG_ALL, \

        cmd_per_lun:    1, \

        present:        0, \

        unchecked_isa_dma: 0, \

        use_clustering: ENABLE_CLUSTERING, \

 use_new_eh_code: 0 \

}

#define VIRT_TO_BUS(i)  (unsigned int) virt_to_bus((void *)(i))

#define ULONG   unsigned long

#define USHORT  unsigned short

#define UCHAR   unsigned char

#define BYTE    u8

#define WORD    unsigned short

#define DWORD   unsigned long

#define UBYTE   u8

#define UWORD   unsigned short

#define UDWORD  unsigned long

#define U32   u32

#ifndef NULL

#define NULL     0              /* zero          */

#endif

#ifndef TRUE

#define TRUE     (1)            /* boolean true  */

#endif

#ifndef FALSE

#define FALSE    (0)            /* boolean false */

#endif

#ifndef FAILURE

#define FAILURE  (-1)

#endif

#define i91u_MAXQUEUE           2

#define TOTAL_SG_ENTRY          32

#define MAX_TARGETS             16

#define SENSE_SIZE              14

#define INI_VENDOR_ID   0x1101  /* Initio's PCI vendor ID       */

#define DMX_VENDOR_ID   0x134a  /* Domex's PCI vendor ID        */

#define I950_DEVICE_ID  0x9500  /* Initio's inic-950 product ID   */

#define I940_DEVICE_ID  0x9400  /* Initio's inic-940 product ID   */

#define I935_DEVICE_ID  0x9401  /* Initio's inic-935 product ID   */

#define I920_DEVICE_ID  0x0002  /* Initio's other product ID      */

/************************************************************************/

/*              Vendor ID/Device ID Pair Structure                      */

/************************************************************************/

typedef struct PCI_ID_Struc {

        unsigned short vendor_id;

        unsigned short device_id;

} PCI_ID;

/************************************************************************/

/*              Scatter-Gather Element Structure                        */

/************************************************************************/

typedef struct SG_Struc {

        U32 SG_Ptr;             /* Data Pointer */

        U32 SG_Len;             /* Data Length */

} SG;

/***********************************************************************

                SCSI Control Block

************************************************************************/

typedef struct Scsi_Ctrl_Blk {

        U32 SCB_InitioReserved[9];      /* 0 */

        UBYTE SCB_Opcode;       /*24 SCB command code */

        UBYTE SCB_Flags;        /*25 SCB Flags */

        UBYTE SCB_Target;       /*26 Target Id */

        UBYTE SCB_Lun;          /*27 Lun */

        U32 SCB_BufPtr;         /*28 Data Buffer Pointer */

        U32 SCB_BufLen;         /*2C Data Allocation Length */

        UBYTE SCB_SGLen;        /*30 SG list # */

        UBYTE SCB_SenseLen;     /*31 Sense Allocation Length */

        UBYTE SCB_HaStat;       /*32 */

        UBYTE SCB_TaStat;       /*33 */

        UBYTE SCB_CDBLen;       /*34 CDB Length */

        UBYTE SCB_Ident;        /*35 Identify */

        UBYTE SCB_TagMsg;       /*36 Tag Message */

        UBYTE SCB_TagId;        /*37 Queue Tag */

        UBYTE SCB_CDB[12];      /*38 */

        U32 SCB_SGPAddr;        /*44 SG List/Sense Buf phy. Addr. */

        U32 SCB_SensePtr;       /*48 Sense data pointer */

        void (*SCB_Post) (BYTE *, BYTE *);      /*4C POST routine */

        Scsi_Cmnd *SCB_Srb;     /*50 SRB Pointer */

        SG SCB_SGList[TOTAL_SG_ENTRY];  /*54 Start of SG list */

} SCB;

/* Opcodes of SCB_Opcode */

#define ExecSCSI        0x1

#define BusDevRst       0x2

#define AbortCmd        0x3

/* Bit Definition for SCB_Flags */

#define SCF_DONE        0x01

#define SCF_POST        0x02

#define SCF_SENSE       0x04

#define SCF_DIR         0x18

#define SCF_NO_DCHK     0x00

#define SCF_DIN         0x08

#define SCF_DOUT        0x10

#define SCF_NO_XF       0x18

#define SCF_POLL        0x40

#define SCF_SG          0x80

/* Error Codes for SCB_HaStat */

#define HOST_SEL_TOUT   0x11

#define HOST_DO_DU      0x12

#define HOST_BUS_FREE   0x13

#define HOST_BAD_PHAS   0x14

#define HOST_INV_CMD    0x16

#define HOST_SCSI_RST   0x1B

#define HOST_DEV_RST    0x1C

/* Error Codes for SCB_TaStat */

#define TARGET_CHKCOND  0x02

#define TARGET_BUSY     0x08

/* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */

#define MSG_STAG        0x20

#define MSG_HTAG        0x21

#define MSG_OTAG        0x22

/***********************************************************************

                Target Device Control Structure

**********************************************************************/

typedef struct Tar_Ctrl_Struc {

        ULONG TCS_InitioReserved;       /* 0 */

        UWORD TCS_DrvFlags;     /* 4 */

        UBYTE TCS_DrvHead;      /* 6 */

        UBYTE TCS_DrvSector;    /* 7 */

} TCS;

/***********************************************************************

                Target Device Control Structure

**********************************************************************/

/* Bit Definition for TCF_DrvFlags */

#define TCF_DRV_255_63          0x0400

/***********************************************************************

              Host Adapter Control Structure

************************************************************************/

typedef struct Ha_Ctrl_Struc {

        UWORD HCS_Base;         /* 00 */

        UWORD HCS_BIOS;         /* 02 */

        UBYTE HCS_Intr;         /* 04 */

        UBYTE HCS_SCSI_ID;      /* 05 */

        UBYTE HCS_MaxTar;       /* 06 */

        UBYTE HCS_NumScbs;      /* 07 */

        UBYTE HCS_Flags;        /* 08 */

        UBYTE HCS_Index;        /* 09 */

        UBYTE HCS_Reserved[2];  /* 0a */

        ULONG HCS_InitioReserved[27];   /* 0C */

        TCS HCS_Tcs[16];        /* 78 -> 16 Targets */

        Scsi_Cmnd *pSRB_head;   /* SRB save queue header     */

        Scsi_Cmnd *pSRB_tail;   /* SRB save queue tail       */

        spinlock_t HCS_AvailLock;

        spinlock_t HCS_SemaphLock;

        spinlock_t pSRB_lock;

        struct pci_dev *pci_dev;

} HCS;

/* Bit Definition for HCB_Flags */

#define HCF_EXPECT_RESET        0x10

/* SCSI related definition                                              */

#define DISC_NOT_ALLOW          0x80    /* Disconnect is not allowed    */

#define DISC_ALLOW              0xC0    /* Disconnect is allowed        */