Subversion Repositories or1k

/*

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file "COPYING" in the main directory of this archive

 * for more details.

 *

 * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle

 */

#ifndef __ASM_JAZZ_H

#define __ASM_JAZZ_H

/*

 * The addresses below are virtual address. The mappings are

 * created on startup via wired entries in the tlb. The Mips

 * Magnum R3000 and R4000 machines are similar in many aspects,

 * but many hardware register are accessible at 0xb9000000 in

 * instead of 0xe0000000.

 */

#define JAZZ_LOCAL_IO_SPACE     0xe0000000

/*

 * Revision numbers in PICA_ASIC_REVISION

 *

 * 0xf0000000 - Rev1

 * 0xf0000001 - Rev2

 * 0xf0000002 - Rev3

 */

#define PICA_ASIC_REVISION      0xe0000008

/*

 * The segments of the seven segment LED are mapped

 * to the control bits as follows:

 *

 *         (7)

 *      ---------

 *      |       |

 *  (2) |       | (6)

 *      |  (1)  |

 *      ---------

 *      |       |

 *  (3) |       | (5)

 *      |  (4)  |

 *      --------- . (0)

 */

#define PICA_LED                0xe000f000

/*

 * Some characters for the LED control registers

 * The original Mips machines seem to have a LED display

 * with integrated decoder while the Acer machines can

 * control each of the seven segments and the dot independently.

 * It's only a toy, anyway...

 */

#define LED_DOT                 0x01

#define LED_SPACE               0x00

#define LED_0                   0xfc

#define LED_1                   0x60

#define LED_2                   0xda

#define LED_3                   0xf2

#define LED_4                   0x66

#define LED_5                   0xb6

#define LED_6                   0xbe

#define LED_7                   0xe0

#define LED_8                   0xfe

#define LED_9                   0xf6

#define LED_A                   0xee

#define LED_b                   0x3e

#define LED_C                   0x9c

#define LED_d                   0x7a

#define LED_E                   0x9e

#define LED_F                   0x8e

#ifndef __ASSEMBLY__

static __inline__ void pica_set_led(unsigned int bits)

{

        volatile unsigned int *led_register = (unsigned int *) PICA_LED;

        *led_register = bits;

}

#endif /* !__ASSEMBLY__ */

/*

 * Base address of the Sonic Ethernet adapter in Jazz machines.

 */

#define JAZZ_ETHERNET_BASE  0xe0001000

/*

 * Base address of the 53C94 SCSI hostadapter in Jazz machines.

 */

#define JAZZ_SCSI_BASE          0xe0002000

/*

 * i8042 keyboard controller for JAZZ and PICA chipsets.

 * This address is just a guess and seems to differ from

 * other mips machines such as RC3xxx...

 */

#define JAZZ_KEYBOARD_ADDRESS   0xe0005000

#define JAZZ_KEYBOARD_DATA      0xe0005000

#define JAZZ_KEYBOARD_COMMAND   0xe0005001

#ifndef __ASSEMBLY__

typedef struct {

        unsigned char data;

        unsigned char command;

} jazz_keyboard_hardware;

typedef struct {

        unsigned char pad0[3];

        unsigned char data;

        unsigned char pad1[3];

        unsigned char command;

} mips_keyboard_hardware;

/*

 * For now. Needs to be changed for RC3xxx support. See below.

 */

#define keyboard_hardware       jazz_keyboard_hardware

#endif /* !__ASSEMBLY__ */

/*

 * i8042 keyboard controller for most other Mips machines.

 */

#define MIPS_KEYBOARD_ADDRESS   0xb9005000

#define MIPS_KEYBOARD_DATA      0xb9005003

#define MIPS_KEYBOARD_COMMAND   0xb9005007

/*

 * Serial and parallel ports (WD 16C552) on the Mips JAZZ

 */

#define JAZZ_SERIAL1_BASE       (unsigned int)0xe0006000

#define JAZZ_SERIAL2_BASE       (unsigned int)0xe0007000

#define JAZZ_PARALLEL_BASE      (unsigned int)0xe0008000

/*

 * Dummy Device Address. Used in jazzdma.c

 */

#define JAZZ_DUMMY_DEVICE       0xe000d000

/*

 * JAZZ timer registers and interrupt no.

 * Note that the hardware timer interrupt is actually on

 * cpu level 6, but to keep compatibility with PC stuff

 * it is remapped to vector 0. See arch/mips/kernel/entry.S.

 */

#define JAZZ_TIMER_INTERVAL     0xe0000228

#define JAZZ_TIMER_REGISTER     0xe0000230

/*

 * DRAM configuration register

 */

#ifndef __ASSEMBLY__

#ifdef __MIPSEL__

typedef struct {

        unsigned int bank2 : 3;

        unsigned int bank1 : 3;

        unsigned int mem_bus_width : 1;

        unsigned int reserved2 : 1;

        unsigned int page_mode : 1;

        unsigned int reserved1 : 23;

} dram_configuration;

#else /* defined (__MIPSEB__) */

typedef struct {

        unsigned int reserved1 : 23;

        unsigned int page_mode : 1;

        unsigned int reserved2 : 1;

        unsigned int mem_bus_width : 1;

        unsigned int bank1 : 3;

        unsigned int bank2 : 3;

} dram_configuration;

#endif

#endif /* !__ASSEMBLY__ */

#define PICA_DRAM_CONFIG        0xe00fffe0

/*

 * JAZZ interrupt control registers

 */

#define JAZZ_IO_IRQ_SOURCE      0xe0010000

#define JAZZ_IO_IRQ_ENABLE      0xe0010002

/*

 * JAZZ interrupt enable bits

 */

#define JAZZ_IE_PARALLEL            (1 << 0)

#define JAZZ_IE_FLOPPY              (1 << 1)

#define JAZZ_IE_SOUND               (1 << 2)

#define JAZZ_IE_VIDEO               (1 << 3)

#define JAZZ_IE_ETHERNET            (1 << 4)

#define JAZZ_IE_SCSI                (1 << 5)

#define JAZZ_IE_KEYBOARD            (1 << 6)

#define JAZZ_IE_MOUSE               (1 << 7)

#define JAZZ_IE_SERIAL1             (1 << 8)

#define JAZZ_IE_SERIAL2             (1 << 9)

/*

 * JAZZ Interrupt Level definitions

 *

 * This is somewhat broken.  For reasons which nobody can remember anymore

 * we remap the Jazz interrupts to the usual ISA style interrupt numbers.

 */

#define JAZZ_PARALLEL_IRQ       16

#define JAZZ_FLOPPY_IRQ          6 /* needs to be consistent with floppy driver! */

#define JAZZ_SOUND_IRQ          18

#define JAZZ_VIDEO_IRQ          19

#define JAZZ_ETHERNET_IRQ       20

#define JAZZ_SCSI_IRQ           21

#define JAZZ_KEYBOARD_IRQ       22

#define JAZZ_MOUSE_IRQ          23

#define JAZZ_SERIAL1_IRQ        24

#define JAZZ_SERIAL2_IRQ        25

#define JAZZ_TIMER_IRQ          31

/*

 * JAZZ DMA Channels

 * Note: Channels 4...7 are not used with respect to the Acer PICA-61

 * chipset which does not provide these DMA channels.

 */

#define JAZZ_SCSI_DMA           0              /* SCSI */

#define JAZZ_FLOPPY_DMA         1              /* FLOPPY */

#define JAZZ_AUDIOL_DMA         2              /* AUDIO L */

#define JAZZ_AUDIOR_DMA         3              /* AUDIO R */

/*

 * JAZZ R4030 MCT_ADR chip (DMA controller)

 * Note: Virtual Addresses !

 */

#define JAZZ_R4030_CONFIG       0xE0000000      /* R4030 config register */

#define JAZZ_R4030_REVISION     0xE0000008      /* same as PICA_ASIC_REVISION */

#define JAZZ_R4030_INV_ADDR     0xE0000010      /* Invalid Address register */

#define JAZZ_R4030_TRSTBL_BASE  0xE0000018      /* Translation Table Base */

#define JAZZ_R4030_TRSTBL_LIM   0xE0000020      /* Translation Table Limit */

#define JAZZ_R4030_TRSTBL_INV   0xE0000028      /* Translation Table Invalidate */

#define JAZZ_R4030_CACHE_MTNC   0xE0000030      /* Cache Maintenance */

#define JAZZ_R4030_R_FAIL_ADDR  0xE0000038      /* Remote Failed Address */

#define JAZZ_R4030_M_FAIL_ADDR  0xE0000040      /* Memory Failed Address */

#define JAZZ_R4030_CACHE_PTAG   0xE0000048      /* I/O Cache Physical Tag */

#define JAZZ_R4030_CACHE_LTAG   0xE0000050      /* I/O Cache Logical Tag */

#define JAZZ_R4030_CACHE_BMASK  0xE0000058      /* I/O Cache Byte Mask */

#define JAZZ_R4030_CACHE_BWIN   0xE0000060      /* I/O Cache Buffer Window */

/*

 * Remote Speed Registers.

 *

 *  0: free,      1: Ethernet,  2: SCSI,      3: Floppy,

 *  4: RTC,       5: Kb./Mouse  6: serial 1,  7: serial 2,

 *  8: parallel,  9: NVRAM,    10: CPU,      11: PROM,

 * 12: reserved, 13: free,     14: 7seg LED, 15: ???

 */

#define JAZZ_R4030_REM_SPEED    0xE0000070      /* 16 Remote Speed Registers */

                                                /* 0xE0000070,78,80... 0xE00000E8 */

#define JAZZ_R4030_IRQ_ENABLE   0xE00000E8      /* Internal Interrupt Enable */

#define JAZZ_R4030_INVAL_ADDR   0xE0000010      /* Invalid address Register */

#define JAZZ_R4030_IRQ_SOURCE   0xE0000200      /* Interrupt Source Register */

#define JAZZ_R4030_I386_ERROR   0xE0000208      /* i386/EISA Bus Error */

/*

 * Virtual (E)ISA controller address

 */

#define JAZZ_EISA_IRQ_ACK       0xE0000238      /* EISA interrupt acknowledge */

/*

 * Access the R4030 DMA and I/O Controller

 */

#ifndef __ASSEMBLY__

static inline void r4030_delay(void)

{

__asm__ __volatile__(

        ".set\tnoreorder\n\t"

        "nop\n\t"

        "nop\n\t"

        "nop\n\t"

        "nop\n\t"

        ".set\treorder");

}

static inline unsigned short r4030_read_reg16(unsigned addr)

{

        unsigned short ret = *((volatile unsigned short *)addr);

        r4030_delay();

        return ret;

}

static inline unsigned int r4030_read_reg32(unsigned addr)

{

        unsigned int ret = *((volatile unsigned int *)addr);

        r4030_delay();

        return ret;

}

static inline void r4030_write_reg16(unsigned addr, unsigned val)

{

        *((volatile unsigned short *)addr) = val;

        r4030_delay();

}

static inline void r4030_write_reg32(unsigned addr, unsigned val)

{

        *((volatile unsigned int *)addr) = val;

        r4030_delay();

}

#endif /* !__ASSEMBLY__ */

#define JAZZ_FDC_BASE   0xe0003000

#define JAZZ_RTC_BASE   0xe0004000

#define JAZZ_PORT_BASE  0xe2000000

#define JAZZ_EISA_BASE  0xe3000000

#endif /* __ASM_JAZZ_H */