Subversion Repositories or1k

/*

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file "COPYING" in the main directory of this archive

 * for more details.

 *

 * Copyright (C) 1994, 1995 Waldorf GmbH

 * Copyright (C) 1994 - 2000, 03 Ralf Baechle

 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.

 */

#ifndef _ASM_IO_H

#define _ASM_IO_H

#include <linux/config.h>

#include <asm/addrspace.h>

#include <asm/page.h>

#include <asm/byteorder.h>

#ifdef CONFIG_MIPS_COBALT

#include <asm/cobalt/io.h>

#endif

#ifdef CONFIG_DECSTATION

#include <asm/dec/io.h>

#endif

#ifdef CONFIG_MIPS_ATLAS

#include <asm/mips-boards/io.h>

#endif

#ifdef CONFIG_MIPS_MALTA

#include <asm/mips-boards/io.h>

#endif

#ifdef CONFIG_MIPS_SEAD

#include <asm/mips-boards/io.h>

#endif

#ifdef CONFIG_SGI_IP22

#include <asm/sgi/io.h>

#endif

#ifdef CONFIG_SGI_IP27

#include <asm/sn/io.h>

#endif

#ifdef CONFIG_SIBYTE_SB1xxx_SOC

#include <asm/sibyte/io.h>

#endif

#ifdef CONFIG_SGI_IP27

extern unsigned long bus_to_baddr[256];

#define bus_to_baddr(bus, addr) (bus_to_baddr[(bus)->number] + (addr))

#define baddr_to_bus(bus, addr) ((addr) - bus_to_baddr[(bus)->number])

#define __swizzle_addr_w(port)  ((port) ^ 2)

#else

#define bus_to_baddr(bus, addr) (addr)

#define baddr_to_bus(bus, addr) (addr)

#define __swizzle_addr_w(port)  (port)

#endif

/*

 * Slowdown I/O port space accesses for antique hardware.

 */

#undef CONF_SLOWDOWN_IO

/*

 * Sane hardware offers swapping of I/O space accesses in hardware; less

 * sane hardware forces software to fiddle with this.  Totally insane hardware

 * introduces special cases like:

 *

 * IP22 seems braindead enough to swap 16-bits values in hardware, but not

 * 32-bits.  Go figure... Can't tell without documentation.

 *

 * We only do the swapping to keep the kernel config bits of bi-endian

 * machines a bit saner.

 */

#if defined(CONFIG_SWAP_IO_SPACE_W) && defined(__MIPSEB__)

#define __ioswab16(x) swab16(x)

#else

#define __ioswab16(x) (x)

#endif

#if defined(CONFIG_SWAP_IO_SPACE_L) && defined(__MIPSEB__)

#define __ioswab32(x) swab32(x)

#else

#define __ioswab32(x) (x)

#endif

/*

 * Change "struct page" to physical address.

 */

#define page_to_phys(page)      PAGE_TO_PA(page)

/*

 *     ioremap         -       map bus memory into CPU space

 *     @offset:        bus address of the memory

 *     @size:          size of the resource to map

 *

 *     ioremap performs a platform specific sequence of operations to

 *     make bus memory CPU accessible via the readb/readw/readl/writeb/

 *     writew/writel functions and the other mmio helpers. The returned

 *     address is not guaranteed to be usable directly as a virtual

 *     address.

 */

static inline void * ioremap(unsigned long offset, unsigned long size)

{

        return (void *) (IO_SPACE_BASE | offset);

}

/*

 *     ioremap_nocache         -       map bus memory into CPU space

 *     @offset:        bus address of the memory

 *     @size:          size of the resource to map

 *

 *     ioremap_nocache performs a platform specific sequence of operations to

 *     make bus memory CPU accessible via the readb/readw/readl/writeb/

 *     writew/writel functions and the other mmio helpers. The returned

 *     address is not guaranteed to be usable directly as a virtual

 *     address.

 *

 *     This version of ioremap ensures that the memory is marked uncachable

 *     on the CPU as well as honouring existing caching rules from things like

 *     the PCI bus. Note that there are other caches and buffers on many

 *     busses. In paticular driver authors should read up on PCI writes

 *

 *     It's useful if some control registers are in such an area and

 *     write combining or read caching is not desirable:

 */

static inline void * ioremap_nocache (unsigned long offset, unsigned long size)

{

        return (void *) (IO_SPACE_BASE | offset);

}

static inline void iounmap(void *addr)

{

}

/*

 * XXX We need system specific versions of these to handle EISA address bits

 * 24-31 on SNI.

 * XXX more SNI hacks.

 */

#define readb(addr)             (*(volatile unsigned char *)(addr))

#define readw(addr)             __ioswab16((*(volatile unsigned short *)(addr)))

#define readl(addr)             __ioswab32((*(volatile unsigned int *)(addr)))

#define __raw_readb(addr)       (*(volatile unsigned char *)(addr))

#define __raw_readw(addr)       (*(volatile unsigned short *)(addr))

#define __raw_readl(addr)       (*(volatile unsigned int *)(addr))

#define writeb(b,addr) ((*(volatile unsigned char *)(addr)) = (b))

#define writew(b,addr) ((*(volatile unsigned short *)(addr)) = (__ioswab16(b)))

#define writel(b,addr) ((*(volatile unsigned int *)(addr)) = (__ioswab32(b)))

#define __raw_writeb(b,addr)    ((*(volatile unsigned char *)(addr)) = (b))

#define __raw_writew(w,addr)    ((*(volatile unsigned short *)(addr)) = (w))

#define __raw_writel(l,addr)    ((*(volatile unsigned int *)(addr)) = (l))

/*

 * TODO: Should use variants that don't do prefetching.

 */

#define memset_io(a,b,c)        memset((void *)(a),(b),(c))

#define memcpy_fromio(a,b,c)    memcpy((a),(void *)(b),(c))

#define memcpy_toio(a,b,c)      memcpy((void *)(a),(b),(c))

/*

 * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped

 * for the processor.  This implies the assumption that there is only

 * one of these busses.

 */

extern unsigned long isa_slot_offset;

/*

 * ISA space is 'always mapped' on currently supported MIPS systems, no need

 * to explicitly ioremap() it. The fact that the ISA IO space is mapped

 * to PAGE_OFFSET is pure coincidence - it does not mean ISA values

 * are physical addresses. The following constant pointer can be

 * used as the IO-area pointer (it can be iounmapped as well, so the

 * analogy with PCI is quite large):

 */

#define __ISA_IO_base ((char *)(isa_slot_offset))

#define isa_readb(a) readb(__ISA_IO_base + (a))

#define isa_readw(a) readw(__ISA_IO_base + (a))

#define isa_readl(a) readl(__ISA_IO_base + (a))

#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a))

#define isa_writew(w,a) writew(w,__ISA_IO_base + (a))

#define isa_writel(l,a) writel(l,__ISA_IO_base + (a))

#define isa_memset_io(a,b,c)            memset_io(__ISA_IO_base + (a),(b),(c))

#define isa_memcpy_fromio(a,b,c)        memcpy_fromio((a),__ISA_IO_base + (b),(c))

#define isa_memcpy_toio(a,b,c)          memcpy_toio(__ISA_IO_base + (a),(b),(c))

/*

 * We don't have csum_partial_copy_fromio() yet, so we cheat here and

 * just copy it. The net code will then do the checksum later.

 */

#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len))

#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d))

/*

 *     check_signature         -       find BIOS signatures

 *     @io_addr: mmio address to check

 *     @signature:  signature block

 *     @length: length of signature

 *

 *     Perform a signature comparison with the mmio address io_addr. This

 *     address should have been obtained by ioremap.

 *     Returns 1 on a match.

 */

static inline int check_signature(unsigned long io_addr,

        const unsigned char *signature, int length)

{

        int retval = 0;

        do {

                if (readb(io_addr) != *signature)

                        goto out;

                io_addr++;

                signature++;

                length--;

        } while (length);

        retval = 1;

out:

        return retval;

}

/*

 *     isa_check_signature             -       find BIOS signatures

 *     @io_addr: mmio address to check

 *     @signature:  signature block

 *     @length: length of signature

 *

 *     Perform a signature comparison with the ISA mmio address io_addr.

 *     Returns 1 on a match.

 *

 *     This function is deprecated. New drivers should use ioremap and

 *     check_signature.

 */

static inline int isa_check_signature(unsigned long io_addr,

        const unsigned char *signature, int length)

{

        int retval = 0;

        do {

                if (isa_readb(io_addr) != *signature)

                        goto out;

                io_addr++;

                signature++;

                length--;

        } while (length);

        retval = 1;

out:

        return retval;

}

/*

 *     virt_to_phys    -       map virtual addresses to physical

 *     @address: address to remap

 *

 *     The returned physical address is the physical (CPU) mapping for

 *     the memory address given. It is only valid to use this function on

 *     addresses directly mapped or allocated via kmalloc.

 *

 *     This function does not give bus mappings for DMA transfers. In

 *     almost all conceivable cases a device driver should not be using

 *     this function

 */

static inline unsigned long virt_to_phys(volatile void * address)

{

        return (unsigned long)address - PAGE_OFFSET;

}

/*

 *     phys_to_virt    -       map physical address to virtual

 *     @address: address to remap

 *

 *     The returned virtual address is a current CPU mapping for

 *     the memory address given. It is only valid to use this function on

 *     addresses that have a kernel mapping

 *

 *     This function does not handle bus mappings for DMA transfers. In

 *     almost all conceivable cases a device driver should not be using

 *     this function

 */

static inline void * phys_to_virt(unsigned long address)

{

        return (void *)(address + PAGE_OFFSET);

}

/*

 * IO bus memory addresses are also 1:1 with the physical address

 */

static inline unsigned long virt_to_bus(volatile void * address)

{

        return (unsigned long)address - PAGE_OFFSET;

}

static inline void * bus_to_virt(unsigned long address)

{

        return (void *)(address + PAGE_OFFSET);

}

/* This is too simpleminded for more sophisticated than dumb hardware ...  */

#define page_to_bus page_to_phys

/*

 * On MIPS I/O ports are memory mapped, so we access them using normal

 * load/store instructions. mips_io_port_base is the virtual address to

 * which all ports are being mapped.  For sake of efficiency some code

 * assumes that this is an address that can be loaded with a single lui

 * instruction, so the lower 16 bits must be zero.  Should be true on

 * on any sane architecture; generic code does not use this assumption.

 */

extern const unsigned long mips_io_port_base;

#define set_io_port_base(base) \

        do { * (unsigned long *) &mips_io_port_base = (base); } while (0)

#define __SLOW_DOWN_IO \

        __asm__ __volatile__( \

                "sb\t$0,0x80(%0)" \

                : : "r" (mips_io_port_base));

#ifdef CONF_SLOWDOWN_IO

#ifdef REALLY_SLOW_IO

#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }

#else

#define SLOW_DOWN_IO __SLOW_DOWN_IO

#endif

#else

#define SLOW_DOWN_IO

#endif

#define outb(val,port)                                                  \

do {                                                                    \

        *(volatile u8 *)(mips_io_port_base + (port)) = (val);           \

} while(0)

#define outw(val,port)                                                  \

do {                                                                    \

        *(volatile u16 *)(mips_io_port_base + __swizzle_addr_w(port)) = \

                __ioswab16(val);                                        \

} while(0)

#define outl(val,port)                                                  \

do {                                                                    \

        *(volatile u32 *)(mips_io_port_base + (port)) = __ioswab32(val);\

} while(0)

#define outb_p(val,port)                                                \

do {                                                                    \

        *(volatile u8 *)(mips_io_port_base + (port)) = (val);           \

        SLOW_DOWN_IO;                                                   \

} while(0)

#define outw_p(val,port)                                                \

do {                                                                    \

        *(volatile u16 *)(mips_io_port_base + __swizzle_addr_w(port)) = \

                __ioswab16(val);                                        \

        SLOW_DOWN_IO;                                                   \

} while(0)

#define outl_p(val,port)                                                \

do {                                                                    \

        *(volatile u32 *)(mips_io_port_base + (port)) = __ioswab32(val);\

        SLOW_DOWN_IO;                                                   \

} while(0)

static inline unsigned char inb(unsigned long port)

{

        return *(volatile u8 *)(mips_io_port_base + port);

}

static inline unsigned short inw(unsigned long port)

{

        port = __swizzle_addr_w(port);

        return __ioswab16(*(volatile u16 *)(mips_io_port_base + port));

}

static inline unsigned int inl(unsigned long port)

{

        return __ioswab32(*(volatile u32 *)(mips_io_port_base + port));

}

static inline unsigned char inb_p(unsigned long port)

{

        u8 __val;

        __val = *(volatile u8 *)(mips_io_port_base + port);

        SLOW_DOWN_IO;

        return __val;

}

static inline unsigned short inw_p(unsigned long port)

{

        u16 __val;

        port = __swizzle_addr_w(port);

        __val = *(volatile u16 *)(mips_io_port_base + port);

        SLOW_DOWN_IO;

        return __ioswab16(__val);

}

static inline unsigned int inl_p(unsigned long port)

{

        u32 __val;

        __val = *(volatile u32 *)(mips_io_port_base + port);

        SLOW_DOWN_IO;

        return __ioswab32(__val);

}

static inline void __outsb(unsigned long port, void *addr, unsigned int count)

{

        while (count--) {

                outb(*(u8 *)addr, port);

                addr++;

        }

}

static inline void __insb(unsigned long port, void *addr, unsigned int count)

{

        while (count--) {

                *(u8 *)addr = inb(port);

                addr++;

        }

}

static inline void __outsw(unsigned long port, void *addr, unsigned int count)

{

        while (count--) {

                outw(*(u16 *)addr, port);

                addr += 2;

        }

}

static inline void __insw(unsigned long port, void *addr, unsigned int count)

{

        while (count--) {

                *(u16 *)addr = inw(port);

                addr += 2;

        }

}

static inline void __outsl(unsigned long port, void *addr, unsigned int count)

{

        while (count--) {

                outl(*(u32 *)addr, port);

                addr += 4;

        }

}

static inline void __insl(unsigned long port, void *addr, unsigned int count)

{

        while (count--) {

                *(u32 *)addr = inl(port);

                addr += 4;

        }

}

#define outsb(port, addr, count) __outsb(port, addr, count)

#define insb(port, addr, count) __insb(port, addr, count)

#define outsw(port, addr, count) __outsw(port, addr, count)

#define insw(port, addr, count) __insw(port, addr, count)

#define outsl(port, addr, count) __outsl(port, addr, count)

#define insl(port, addr, count) __insl(port, addr, count)

/*

 * The caches on some architectures aren't dma-coherent and have need to

 * handle this in software.  There are three types of operations that

 * can be applied to dma buffers.

 *

 *  - dma_cache_wback_inv(start, size) makes caches and coherent by

 *    writing the content of the caches back to memory, if necessary.

 *    The function also invalidates the affected part of the caches as

 *    necessary before DMA transfers from outside to memory.

 *  - dma_cache_wback(start, size) makes caches and coherent by

 *    writing the content of the caches back to memory, if necessary.

 *    The function also invalidates the affected part of the caches as

 *    necessary before DMA transfers from outside to memory.

 *  - dma_cache_inv(start, size) invalidates the affected parts of the

 *    caches.  Dirty lines of the caches may be written back or simply

 *    be discarded.  This operation is necessary before dma operations

 *    to the memory.

 */

#ifdef CONFIG_NONCOHERENT_IO

extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);

extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);

extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);

#define dma_cache_wback_inv(start,size) _dma_cache_wback_inv(start,size)

#define dma_cache_wback(start,size)     _dma_cache_wback(start,size)

#define dma_cache_inv(start,size)       _dma_cache_inv(start,size)

#else /* Sane hardware */

#define dma_cache_wback_inv(start,size) \

        do { (void) (start); (void) (size); } while (0)

#define dma_cache_wback(start,size)     \

        do { (void) (start); (void) (size); } while (0)

#define dma_cache_inv(start,size)       \

        do { (void) (start); (void) (size); } while (0)

#endif /* CONFIG_NONCOHERENT_IO */

#endif /* _ASM_IO_H */