Subversion Repositories or1k

/*

 * This file is subject to the terms and conditions of the GNU General Public

 * License. See the file "COPYING" in the main directory of this archive

 * for more details.

 *

 * mc.h: Definitions for SGI Memory Controller

 *

 * Copyright (C) 1996 David S. Miller

 * Copyright (C) 1999 Ralf Baechle

 * Copyright (C) 1999 Silicon Graphics, Inc.

 */

#ifndef _SGI_MC_H

#define _SGI_MC_H

struct sgimc_regs {

        u32 _unused0;

        volatile u32 cpuctrl0;  /* CPU control register 0, readwrite */

#define SGIMC_CCTRL0_REFS       0x0000000f /* REFS mask */

#define SGIMC_CCTRL0_EREFRESH   0x00000010 /* Memory refresh enable */

#define SGIMC_CCTRL0_EPERRGIO   0x00000020 /* GIO parity error enable */

#define SGIMC_CCTRL0_EPERRMEM   0x00000040 /* Main mem parity error enable */

#define SGIMC_CCTRL0_EPERRCPU   0x00000080 /* CPU bus parity error enable */

#define SGIMC_CCTRL0_WDOG       0x00000100 /* Watchdog timer enable */

#define SGIMC_CCTRL0_SYSINIT    0x00000200 /* System init bit */

#define SGIMC_CCTRL0_GFXRESET   0x00000400 /* Graphics interface reset */

#define SGIMC_CCTRL0_EISALOCK   0x00000800 /* Lock CPU from memory for EISA */

#define SGIMC_CCTRL0_EPERRSCMD  0x00001000 /* SysCMD bus parity error enable */

#define SGIMC_CCTRL0_IENAB      0x00002000 /* Allow interrupts from MC */

#define SGIMC_CCTRL0_ESNOOP     0x00004000 /* Snooping I/O enable */

#define SGIMC_CCTRL0_EPROMWR    0x00008000 /* Prom writes from cpu enable */

#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */

#define SGIMC_CCTRL0_LENDIAN    0x00020000 /* Put MC in little-endian mode */

#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */

#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */

#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */

#define SGIMC_CCTRL0_GIOBTOB    0x08000000 /* Allow GIO back to back writes */

        u32 _unused1;

        volatile u32 cpuctrl1;  /* CPU control register 1, readwrite */

#define SGIMC_CCTRL1_EGIOTIMEO  0x00000010 /* GIO bus timeout enable */

#define SGIMC_CCTRL1_FIXEDEHPC  0x00001000 /* Fixed HPC endianness */

#define SGIMC_CCTRL1_LITTLEHPC  0x00002000 /* Little endian HPC */

#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */

#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */

#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */

#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */

        u32 _unused2;

        volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */

        u32 _unused3;

        volatile u32 systemid;  /* MC system ID register, readonly */

#define SGIMC_SYSID_MASKREV     0x0000000f /* Revision of MC controller */

#define SGIMC_SYSID_EPRESENT    0x00000010 /* Indicates presence of EISA bus */

        u32 _unused4[3];

        volatile u32 divider;   /* Divider reg for RPSS */

        u32 _unused5;

        volatile u32 eeprom;    /* EEPROM byte reg for r4k */

#define SGIMC_EEPROM_PRE        0x00000001 /* eeprom chip PRE pin assertion */

#define SGIMC_EEPROM_CSEL       0x00000002 /* Active high, eeprom chip select */

#define SGIMC_EEPROM_SECLOCK    0x00000004 /* EEPROM serial clock */

#define SGIMC_EEPROM_SDATAO     0x00000008 /* Serial EEPROM data-out */

#define SGIMC_EEPROM_SDATAI     0x00000010 /* Serial EEPROM data-in */

        u32 _unused6[3];

        volatile u32 rcntpre;   /* Preload refresh counter */

        u32 _unused7;

        volatile u32 rcounter;  /* Readonly refresh counter */

        u32 _unused8[13];

        volatile u32 giopar;    /* Parameter word for GIO64 */

#define SGIMC_GIOPAR_HPC64      0x00000001 /* HPC talks to GIO using 64-bits */

#define SGIMC_GIOPAR_GFX64      0x00000002 /* GFX talks to GIO using 64-bits */

#define SGIMC_GIOPAR_EXP064     0x00000004 /* EXP(slot0) talks using 64-bits */

#define SGIMC_GIOPAR_EXP164     0x00000008 /* EXP(slot1) talks using 64-bits */

#define SGIMC_GIOPAR_EISA64     0x00000010 /* EISA bus talks 64-bits to GIO */

#define SGIMC_GIOPAR_HPC264     0x00000020 /* 2nd HPX talks 64-bits to GIO */

#define SGIMC_GIOPAR_RTIMEGFX   0x00000040 /* GFX device has realtime attr */

#define SGIMC_GIOPAR_RTIMEEXP0  0x00000080 /* EXP(slot0) has realtime attr */

#define SGIMC_GIOPAR_RTIMEEXP1  0x00000100 /* EXP(slot1) has realtime attr */

#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */

#define SGIMC_GIOPAR_ONEBUS     0x00000400 /* Exists one GIO64 pipelined bus */

#define SGIMC_GIOPAR_MASTERGFX  0x00000800 /* GFX can act as a bus master */

#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */

#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */

#define SGIMC_GIOPAR_PLINEEXP0  0x00004000 /* EXP(slot0) has pipeline attr */

#define SGIMC_GIOPAR_PLINEEXP1  0x00008000 /* EXP(slot1) has pipeline attr */

        u32 _unused9;

        volatile u32 cputp;     /* CPU bus arb time period */

        u32 _unused10[3];

        volatile u32 lbursttp;  /* Time period for long bursts */

        /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must

         * be the same size. The size encoding for supported SIMMs is bellow */

        u32 _unused11[9];

        volatile u32 mconfig0;  /* Memory config register zero */

        u32 _unused12;

        volatile u32 mconfig1;  /* Memory config register one */

#define SGIMC_MCONFIG_BASEADDR  0x000000ff /* Base address of bank*/

#define SGIMC_MCONFIG_RMASK     0x00001f00 /* Ram config bitmask */

#define SGIMC_MCONFIG_BVALID    0x00002000 /* Bank is valid */

#define SGIMC_MCONFIG_SBANKS    0x00004000 /* Number of subbanks */

        u32 _unused13;

        volatile u32 cmacc;        /* Mem access config for CPU */

        u32 _unused14;

        volatile u32 gmacc;        /* Mem access config for GIO */

        /* This define applies to both cmacc and gmacc registers above. */

#define SGIMC_MACC_ALIASBIG     0x20000000 /* 512MB home for alias */

        /* Error address/status regs from GIO and CPU perspectives. */

        u32 _unused15;

        volatile u32 cerr;      /* Error address reg for CPU */

        u32 _unused16;

        volatile u32 cstat;     /* Status reg for CPU */

#define SGIMC_CSTAT_RD          0x00000100 /* read parity error */

#define SGIMC_CSTAT_PAR         0x00000200 /* CPU parity error */

#define SGIMC_CSTAT_ADDR        0x00000400 /* memory bus error bad addr */

#define SGIMC_CSTAT_SYSAD_PAR   0x00000800 /* sysad parity error */

#define SGIMC_CSTAT_SYSCMD_PAR  0x00001000 /* syscmd parity error */

#define SGIMC_CSTAT_BAD_DATA    0x00002000 /* bad data identifier */

#define SGIMC_CSTAT_PAR_MASK    0x00001f00 /* parity error mask */

#define SGIMC_CSTAT_RD_PAR      (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)

        u32 _unused17;

        volatile u32 gerr;      /* Error address reg for GIO */

        u32 _unused18;

        volatile u32 gstat;     /* Status reg for GIO */

#define SGIMC_GSTAT_RD          0x00000100 /* read parity error */

#define SGIMC_GSTAT_WR          0x00000200 /* write parity error */

#define SGIMC_GSTAT_TIME        0x00000400 /* GIO bus timed out */

#define SGIMC_GSTAT_PROM        0x00000800 /* write to PROM when PROM_EN not set */

#define SGIMC_GSTAT_ADDR        0x00001000 /* parity error on addr cycle */

#define SGIMC_GSTAT_BC          0x00002000 /* parity error on byte count cycle */

#define SGIMC_GSTAT_PIO_RD      0x00004000 /* read data parity on pio */

#define SGIMC_GSTAT_PIO_WR      0x00008000 /* write data parity on pio */

        /* Special hard bus locking registers. */

        u32 _unused19;

        volatile u32 syssembit;         /* Uni-bit system semaphore */

        u32 _unused20;

        volatile u32 mlock;             /* Global GIO memory access lock */

        u32 _unused21;

        volatile u32 elock;             /* Locks EISA from GIO accesses */

        /* GIO dma control registers. */

        u32 _unused22[15];

        volatile u32 gio_dma_trans;     /* DMA mask to translation GIO addrs */

        u32 _unused23;

        volatile u32 gio_dma_sbits;     /* DMA GIO addr substitution bits */

        u32 _unused24;

        volatile u32 dma_intr_cause;    /* DMA IRQ cause indicator bits */

        u32 _unused25;

        volatile u32 dma_ctrl;          /* Main DMA control reg */

        /* DMA TLB entry 0 */

        u32 _unused26[5];

        volatile u32 dtlb_hi0;

        u32 _unused27;

        volatile u32 dtlb_lo0;

        /* DMA TLB entry 1 */

        u32 _unused28;

        volatile u32 dtlb_hi1;

        u32 _unused29;

        volatile u32 dtlb_lo1;

        /* DMA TLB entry 2 */

        u32 _unused30;

        volatile u32 dtlb_hi2;

        u32 _unused31;

        volatile u32 dtlb_lo2;

        /* DMA TLB entry 3 */

        u32 _unused32;

        volatile u32 dtlb_hi3;

        u32 _unused33;

        volatile u32 dtlb_lo3;

        u32 _unused34[0x0392];

        u32 _unused35;

        volatile u32 rpsscounter;       /* Chirps at 100ns */

        u32 _unused36[0x1000/4-2*4];

        u32 _unused37;

        volatile u32 maddronly;         /* Address DMA goes at */

        u32 _unused38;

        volatile u32 maddrpdeflts;      /* Same as above, plus set defaults */

        u32 _unused39;

        volatile u32 dmasz;             /* DMA count */

        u32 _unused40;

        volatile u32 ssize;             /* DMA stride size */

        u32 _unused41;

        volatile u32 gmaddronly;        /* Set GIO DMA but don't start trans */

        u32 _unused42;

        volatile u32 dmaddnpgo;         /* Set GIO DMA addr + start transfer */

        u32 _unused43;

        volatile u32 dmamode;           /* DMA mode config bit settings */

        u32 _unused44;

        volatile u32 dmaccount;         /* Zoom and byte count for DMA */

        u32 _unused45;

        volatile u32 dmastart;          /* Pedal to the metal. */

        u32 _unused46;

        volatile u32 dmarunning;        /* DMA op is in progress */

        u32 _unused47;

        volatile u32 maddrdefstart;     /* Set dma addr, defaults, and kick it */

};

extern struct sgimc_regs *sgimc;

#define SGIMC_BASE              0x1fa00000      /* physical */

/* Base location of the two ram banks found in IP2[0268] machines. */

#define SGIMC_SEG0_BADDR        0x08000000

#define SGIMC_SEG1_BADDR        0x20000000

/* Maximum size of the above banks are per machine. */

#define SGIMC_SEG0_SIZE_ALL             0x10000000 /* 256MB */

#define SGIMC_SEG1_SIZE_IP20_IP22       0x08000000 /* 128MB */

#define SGIMC_SEG1_SIZE_IP26_IP28       0x20000000 /* 512MB */

extern void sgimc_init(void);

#endif /* _SGI_MC_H */