| 1 |
1275 |
phoenix |
/*
|
| 2 |
|
|
* include/asm-x86_64/serial.h
|
| 3 |
|
|
*/
|
| 4 |
|
|
|
| 5 |
|
|
#include <linux/config.h>
|
| 6 |
|
|
|
| 7 |
|
|
/*
|
| 8 |
|
|
* This assumes you have a 1.8432 MHz clock for your UART.
|
| 9 |
|
|
*
|
| 10 |
|
|
* It'd be nice if someone built a serial card with a 24.576 MHz
|
| 11 |
|
|
* clock, since the 16550A is capable of handling a top speed of 1.5
|
| 12 |
|
|
* megabits/second; but this requires the faster clock.
|
| 13 |
|
|
*/
|
| 14 |
|
|
#define BASE_BAUD ( 1843200 / 16 )
|
| 15 |
|
|
|
| 16 |
|
|
/* Standard COM flags (except for COM4, because of the 8514 problem) */
|
| 17 |
|
|
#ifdef CONFIG_SERIAL_DETECT_IRQ
|
| 18 |
|
|
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
|
| 19 |
|
|
#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
|
| 20 |
|
|
#else
|
| 21 |
|
|
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
|
| 22 |
|
|
#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
|
| 23 |
|
|
#endif
|
| 24 |
|
|
|
| 25 |
|
|
#ifdef CONFIG_SERIAL_MANY_PORTS
|
| 26 |
|
|
#define FOURPORT_FLAGS ASYNC_FOURPORT
|
| 27 |
|
|
#define ACCENT_FLAGS 0
|
| 28 |
|
|
#define BOCA_FLAGS 0
|
| 29 |
|
|
#define HUB6_FLAGS 0
|
| 30 |
|
|
#define RS_TABLE_SIZE 64
|
| 31 |
|
|
#else
|
| 32 |
|
|
#define RS_TABLE_SIZE
|
| 33 |
|
|
#endif
|
| 34 |
|
|
|
| 35 |
|
|
#define MCA_COM_FLAGS (STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
|
| 36 |
|
|
|
| 37 |
|
|
/*
|
| 38 |
|
|
* The following define the access methods for the HUB6 card. All
|
| 39 |
|
|
* access is through two ports for all 24 possible chips. The card is
|
| 40 |
|
|
* selected through the high 2 bits, the port on that card with the
|
| 41 |
|
|
* "middle" 3 bits, and the register on that port with the bottom
|
| 42 |
|
|
* 3 bits.
|
| 43 |
|
|
*
|
| 44 |
|
|
* While the access port and interrupt is configurable, the default
|
| 45 |
|
|
* port locations are 0x302 for the port control register, and 0x303
|
| 46 |
|
|
* for the data read/write register. Normally, the interrupt is at irq3
|
| 47 |
|
|
* but can be anything from 3 to 7 inclusive. Note that using 3 will
|
| 48 |
|
|
* require disabling com2.
|
| 49 |
|
|
*/
|
| 50 |
|
|
|
| 51 |
|
|
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
|
| 52 |
|
|
|
| 53 |
|
|
#define STD_SERIAL_PORT_DEFNS \
|
| 54 |
|
|
/* UART CLK PORT IRQ FLAGS */ \
|
| 55 |
|
|
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
|
| 56 |
|
|
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
|
| 57 |
|
|
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
|
| 58 |
|
|
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
|
| 59 |
|
|
|
| 60 |
|
|
/*
|
| 61 |
|
|
* HCDP_SERIAL_PORT_DEFNS should be placed in exactly the same slot
|
| 62 |
|
|
* in rs_table as defined by HCDP_SERIAL_CONSOLE_PORT in
|
| 63 |
|
|
* include/linux/serial.h
|
| 64 |
|
|
*/
|
| 65 |
|
|
#define HCDP_SERIAL_PORT_DEFNS \
|
| 66 |
|
|
{ 0, BASE_BAUD, -1, 0, STD_COM_FLAGS}, /* ttySx device
|
| 67 |
|
|
in comments sucks.
|
| 68 |
|
|
You add an entry
|
| 69 |
|
|
and you get to edit
|
| 70 |
|
|
boatloads of these
|
| 71 |
|
|
comments. Not worth
|
| 72 |
|
|
it */
|
| 73 |
|
|
|
| 74 |
|
|
|
| 75 |
|
|
#ifdef CONFIG_SERIAL_MANY_PORTS
|
| 76 |
|
|
#define EXTRA_SERIAL_PORT_DEFNS \
|
| 77 |
|
|
{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
|
| 78 |
|
|
{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \
|
| 79 |
|
|
{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \
|
| 80 |
|
|
{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \
|
| 81 |
|
|
{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \
|
| 82 |
|
|
{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \
|
| 83 |
|
|
{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \
|
| 84 |
|
|
{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \
|
| 85 |
|
|
{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \
|
| 86 |
|
|
{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \
|
| 87 |
|
|
{ 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \
|
| 88 |
|
|
{ 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \
|
| 89 |
|
|
{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \
|
| 90 |
|
|
{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \
|
| 91 |
|
|
{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \
|
| 92 |
|
|
{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \
|
| 93 |
|
|
{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \
|
| 94 |
|
|
{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \
|
| 95 |
|
|
{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \
|
| 96 |
|
|
{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \
|
| 97 |
|
|
{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \
|
| 98 |
|
|
{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \
|
| 99 |
|
|
{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \
|
| 100 |
|
|
{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \
|
| 101 |
|
|
{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \
|
| 102 |
|
|
{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \
|
| 103 |
|
|
{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \
|
| 104 |
|
|
{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */
|
| 105 |
|
|
#else
|
| 106 |
|
|
#define EXTRA_SERIAL_PORT_DEFNS
|
| 107 |
|
|
#endif
|
| 108 |
|
|
|
| 109 |
|
|
/* You can have up to four HUB6's in the system, but I've only
|
| 110 |
|
|
* included two cards here for a total of twelve ports.
|
| 111 |
|
|
*/
|
| 112 |
|
|
#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
|
| 113 |
|
|
#define HUB6_SERIAL_PORT_DFNS \
|
| 114 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \
|
| 115 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \
|
| 116 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \
|
| 117 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \
|
| 118 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \
|
| 119 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \
|
| 120 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \
|
| 121 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \
|
| 122 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \
|
| 123 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \
|
| 124 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \
|
| 125 |
|
|
{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */
|
| 126 |
|
|
#else
|
| 127 |
|
|
#define HUB6_SERIAL_PORT_DFNS
|
| 128 |
|
|
#endif
|
| 129 |
|
|
|
| 130 |
|
|
#ifdef CONFIG_MCA
|
| 131 |
|
|
#define MCA_SERIAL_PORT_DFNS \
|
| 132 |
|
|
{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS }, \
|
| 133 |
|
|
{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS }, \
|
| 134 |
|
|
{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS }, \
|
| 135 |
|
|
{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS }, \
|
| 136 |
|
|
{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS }, \
|
| 137 |
|
|
{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
|
| 138 |
|
|
#else
|
| 139 |
|
|
#define MCA_SERIAL_PORT_DFNS
|
| 140 |
|
|
#endif
|
| 141 |
|
|
|
| 142 |
|
|
#define SERIAL_PORT_DFNS \
|
| 143 |
|
|
STD_SERIAL_PORT_DEFNS \
|
| 144 |
|
|
EXTRA_SERIAL_PORT_DEFNS \
|
| 145 |
|
|
HUB6_SERIAL_PORT_DFNS \
|
| 146 |
|
|
MCA_SERIAL_PORT_DFNS \
|
| 147 |
|
|
HCDP_SERIAL_PORT_DEFNS
|
