Subversion Repositories or1k

# Makefile.in generated by automake 1.10.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile -- Makefile for OR32 dependent simulation

#

# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org

# Copyright (C) 2008 Embecosm Limited

#

# Contributor Jeremy Bennett 

#

# This file is part of OpenRISC 1000 Architectural Simulator.

#

# This program is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License as published by the Free

# Software Foundation; either version 3 of the License, or (at your option)

# any later version.

#

# This program is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for

# more details.

#

# You should have received a copy of the GNU General Public License along

# with this program.  If not, see .

VPATH = @srcdir@

pkgdatadir = $(datadir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

target_triplet = @target@

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@noinst_PROGRAMS = generate$(EXEEXT)

@DYNAMIC_EXECUTION_TRUE@noinst_PROGRAMS = dyngen$(EXEEXT)

subdir = cpu/or32

DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/configure.in

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

        $(ACLOCAL_M4)

mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

LIBRARIES = $(noinst_LIBRARIES)

libarch_a_AR = $(AR) $(ARFLAGS)

libarch_a_LIBADD =

am__libarch_a_SOURCES_DIST = execute.c or32.c common_i386.h \

        dyn32_defs.h dyngen.h dyn_rec.h i386_regs.h op_arith_op.h \

        op_comp_op.h op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

        op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

        op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h op.c \

        dyn_rec.c op_support.c gen_ops.c gen_ops_gen.c gen_ops_rel.c

@DYNAMIC_EXECUTION_FALSE@am_libarch_a_OBJECTS = execute.$(OBJEXT) \

@DYNAMIC_EXECUTION_FALSE@       or32.$(OBJEXT)

@DYNAMIC_EXECUTION_TRUE@am_libarch_a_OBJECTS = execute.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        or32.$(OBJEXT) op.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        dyn_rec.$(OBJEXT) op_support.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        gen_ops.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        gen_ops_gen.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        gen_ops_rel.$(OBJEXT)

libarch_a_OBJECTS = $(am_libarch_a_OBJECTS)

PROGRAMS = $(noinst_PROGRAMS)

am__dyngen_SOURCES_DIST = dyngen.c dyngen_i386.c dyngen_elf.c \

        common_i386.h dyn32_defs.h dyngen.h dyn_rec.h i386_regs.h \

        op_arith_op.h op_comp_op.h op_extend_op.h op_ff1_op.h \

        op_i386.h op_lwhb_op.h op_mac_op.h op_mftspr_op.h op_support.h \

        op_swhb_op.h op_t_reg_mov_op.h rec_i386.h sched_i386.h \

        simpl32_defs.h

@DYNAMIC_EXECUTION_TRUE@am_dyngen_OBJECTS = dyngen.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        dyngen_i386.$(OBJEXT) \

@DYNAMIC_EXECUTION_TRUE@        dyngen_elf.$(OBJEXT)

dyngen_OBJECTS = $(am_dyngen_OBJECTS)

dyngen_LDADD = $(LDADD)

am__generate_SOURCES_DIST = or32.c generate.c common_i386.h \

        dyn32_defs.h dyngen.h dyn_rec.h i386_regs.h op_arith_op.h \

        op_comp_op.h op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

        op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

        op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@am_generate_OBJECTS =  \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ or32.$(OBJEXT) \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ generate.$(OBJEXT)

generate_OBJECTS = $(am_generate_OBJECTS)

generate_LDADD = $(LDADD)

DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)

depcomp = $(SHELL) $(top_srcdir)/depcomp

am__depfiles_maybe = depfiles

COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

CCLD = $(CC)

LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@

SOURCES = $(libarch_a_SOURCES) $(dyngen_SOURCES) $(generate_SOURCES)

DIST_SOURCES = $(am__libarch_a_SOURCES_DIST) \

        $(am__dyngen_SOURCES_DIST) $(am__generate_SOURCES_DIST)

ETAGS = etags

CTAGS = ctags

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AR = @AR@

ARFLAGS = @ARFLAGS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BUILD_DIR = @BUILD_DIR@

CC = @CC@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CPU_ARCH = @CPU_ARCH@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

GREP = @GREP@

INCLUDES = @INCLUDES@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LDFLAGS = @LDFLAGS@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LOCAL_CFLAGS = @LOCAL_CFLAGS@

LOCAL_DEFS = @LOCAL_DEFS@

LOCAL_LDFLAGS = @LOCAL_LDFLAGS@

LTLIBOBJS = @LTLIBOBJS@

MAKEINFO = @MAKEINFO@

MAKE_SHELL = @MAKE_SHELL@

MKDIR_P = @MKDIR_P@

OBJEXT = @OBJEXT@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

RANLIB = @RANLIB@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

SUMVERSION = @SUMVERSION@

TERMCAP_LIB = @TERMCAP_LIB@

VERSION = @VERSION@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_CC = @ac_ct_CC@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target = @target@

target_alias = @target_alias@

target_cpu = @target_cpu@

target_os = @target_os@

target_vendor = @target_vendor@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

noinst_LIBRARIES = libarch.a

@DYNAMIC_EXECUTION_TRUE@dyngen_SOURCES = dyngen.c dyngen_i386.c dyngen_elf.c \

@DYNAMIC_EXECUTION_TRUE@                 common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \

@DYNAMIC_EXECUTION_TRUE@                 i386_regs.h op_arith_op.h op_comp_op.h \

@DYNAMIC_EXECUTION_TRUE@                 op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

@DYNAMIC_EXECUTION_TRUE@                 op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

@DYNAMIC_EXECUTION_TRUE@                 op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h

@DYNAMIC_EXECUTION_FALSE@libarch_a_SOURCES = execute.c or32.c \

@DYNAMIC_EXECUTION_FALSE@                   common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \

@DYNAMIC_EXECUTION_FALSE@                   i386_regs.h op_arith_op.h op_comp_op.h \

@DYNAMIC_EXECUTION_FALSE@                   op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

@DYNAMIC_EXECUTION_FALSE@                   op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

@DYNAMIC_EXECUTION_FALSE@                   op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h

@DYNAMIC_EXECUTION_TRUE@libarch_a_SOURCES = execute.c or32.c op.c dyn_rec.c op_support.c gen_ops.c \

@DYNAMIC_EXECUTION_TRUE@                    gen_ops_gen.c gen_ops_rel.c \

@DYNAMIC_EXECUTION_TRUE@                    common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \

@DYNAMIC_EXECUTION_TRUE@                    i386_regs.h op_arith_op.h op_comp_op.h \

@DYNAMIC_EXECUTION_TRUE@                    op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

@DYNAMIC_EXECUTION_TRUE@                    op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

@DYNAMIC_EXECUTION_TRUE@                    op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h

@DYNAMIC_EXECUTION_TRUE@OP_CFLAGS = -Wall -fomit-frame-pointer -fno-reorder-blocks -O2

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@generate_SOURCES = or32.c generate.c \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@            common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@            i386_regs.h op_arith_op.h op_comp_op.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@            op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@            op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@            op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@BUILT_SOURCES = execgen.c \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@         common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@         i386_regs.h op_arith_op.h op_comp_op.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@         op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@         op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@         op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h

# If the simulator was first built without --enable-simple and then with it,

# then also remove these two files

CLEANFILES = execgen.c generate gen_ops.c gen_ops.h gen_ops_rel.c gen_ops_gen.c

all: $(BUILT_SOURCES)

        $(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:

.SUFFIXES: .c .o .obj

$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)

        @for dep in $?; do \

          case '$(am__configure_deps)' in \

            *$$dep*) \

              cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \

                && exit 0; \

              exit 1;; \

          esac; \

        done; \

        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  cpu/or32/Makefile'; \

        cd $(top_srcdir) && \

          $(AUTOMAKE) --gnu  cpu/or32/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

        @case '$?' in \

          *config.status*) \

            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

          *) \

            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-noinstLIBRARIES:

        -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)

libarch.a: $(libarch_a_OBJECTS) $(libarch_a_DEPENDENCIES)

        -rm -f libarch.a

        $(libarch_a_AR) libarch.a $(libarch_a_OBJECTS) $(libarch_a_LIBADD)

        $(RANLIB) libarch.a

clean-noinstPROGRAMS:

        -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)

dyngen$(EXEEXT): $(dyngen_OBJECTS) $(dyngen_DEPENDENCIES)

        @rm -f dyngen$(EXEEXT)

        $(LINK) $(dyngen_OBJECTS) $(dyngen_LDADD) $(LIBS)

generate$(EXEEXT): $(generate_OBJECTS) $(generate_DEPENDENCIES)

        @rm -f generate$(EXEEXT)

        $(LINK) $(generate_OBJECTS) $(generate_LDADD) $(LIBS)

mostlyclean-compile:

        -rm -f *.$(OBJEXT)

distclean-compile:

        -rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_rec.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyngen.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyngen_elf.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyngen_i386.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/execute.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_ops.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_ops_gen.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen_ops_rel.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/generate.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/op.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/op_support.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/or32.Po@am__quote@

.c.o:

@am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

@am__fastdepCC_TRUE@    mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@   $(COMPILE) -c $<

.c.obj:

@am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`

@am__fastdepCC_TRUE@    mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        mkid -fID $$unique

tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        tags=; \

        here=`pwd`; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \

          test -n "$$unique" || unique=$$empty_fix; \

          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

            $$tags $$unique; \

        fi

ctags: CTAGS

CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        tags=; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

              END { if (nonempty) { for (i in files) print i; }; }'`; \

        test -z "$(CTAGS_ARGS)$$tags$$unique" \

          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

             $$tags $$unique

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && cd $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        list='$(DISTFILES)'; \

          dist_files=`for file in $$list; do echo $$file; done | \

          sed -e "s|^$$srcdirstrip/||;t" \

              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

        case $$dist_files in \

          */*) $(MKDIR_P) `echo "$$dist_files" | \

                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

                           sort -u` ;; \

        esac; \

        for file in $$dist_files; do \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          if test -d $$d/$$file; then \

            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \

            fi; \

            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \

          else \

            test -f $(distdir)/$$file \

            || cp -p $$d/$$file $(distdir)/$$file \

            || exit 1; \

          fi; \

        done

check-am: all-am

check: $(BUILT_SOURCES)

        $(MAKE) $(AM_MAKEFLAGS) check-am

all-am: Makefile $(LIBRARIES) $(PROGRAMS)

installdirs:

install: $(BUILT_SOURCES)

        $(MAKE) $(AM_MAKEFLAGS) install-am

install-exec: install-exec-am

install-data: install-data-am

uninstall: uninstall-am

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am

install-strip:

        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

          `test -z '$(STRIP)' || \

            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:

        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

        -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)

clean: clean-am

clean-am: clean-generic clean-noinstLIBRARIES clean-noinstPROGRAMS \

        mostlyclean-am

distclean: distclean-am

        -rm -rf ./$(DEPDIR)

        -rm -f Makefile

distclean-am: clean-am distclean-compile distclean-generic \

        distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am

        -rm -rf ./$(DEPDIR)

        -rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \

        clean-noinstLIBRARIES clean-noinstPROGRAMS ctags distclean \

        distclean-compile distclean-generic distclean-tags distdir dvi \

        dvi-am html html-am info info-am install install-am \

        install-data install-data-am install-dvi install-dvi-am \

        install-exec install-exec-am install-html install-html-am \

        install-info install-info-am install-man install-pdf \

        install-pdf-am install-ps install-ps-am install-strip \

        installcheck installcheck-am installdirs maintainer-clean \

        maintainer-clean-generic mostlyclean mostlyclean-compile \

        mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \

        uninstall-am

@DYNAMIC_EXECUTION_TRUE@dyn_rec.o: gen_ops.h

@DYNAMIC_EXECUTION_TRUE@op.S: op.c op_t_reg_mov_op.h op_i386.h op_arith_op.h op_comp_op.h op_extend_op.h op_mac_op.h op_mftspr_op.h op_lwhb_op.h op_swhb_op.h

@DYNAMIC_EXECUTION_TRUE@        $(CC) $(INCLUDES) $(OP_CFLAGS) -o $@ -S $<

@DYNAMIC_EXECUTION_TRUE@gen_ops.h gen_ops.c gen_ops_gen.c gen_ops_rel.c: dyngen op.o

@DYNAMIC_EXECUTION_TRUE@op.o: op.c op_t_reg_mov_op.h op_i386.h op_arith_op.h op_comp_op.h op_extend_op.h op_mac_op.h op_mftspr_op.h op_lwhb_op.h op_swhb_op.h

@DYNAMIC_EXECUTION_TRUE@        $(CC) $(INCLUDES) $(OP_CFLAGS) -o $@ -c $<

@DYNAMIC_EXECUTION_TRUE@gen_ops.h gen_ops.c gen_ops_gen.c gen_ops_rel.c: dyngen$(EXEEXT) op.o

@DYNAMIC_EXECUTION_TRUE@        ./dyngen$(EXEEXT) op.o gen_ops.c gen_ops_gen.c gen_ops_rel.c gen_ops.h

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@execgen.c: generate$(EXEEXT) $(srcdir)/insnset.c

@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ ./generate$(EXEEXT) $(srcdir)/insnset.c execgen.c

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: