Subversion Repositories or1k

/*------------------------------------------------------------------------

 . smc91111.h

 . This is a driver for SMSC's 91C111 single-chip Ethernet device.

 .

 . (C) Copyright 2005

 .

 . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)

 .       Developed by Simple Network Magic Corporation (SNMC)

 . Copyright (C) 1996 by Erik Stahlman (ES)

 .

 . This program is free software; you can redistribute it and/or modify

 . it under the terms of the GNU General Public License as published by

 . the Free Software Foundation; either version 2 of the License, or

 . (at your option) any later version.

 .

 . This program is distributed in the hope that it will be useful,

 . but WITHOUT ANY WARRANTY; without even the implied warranty of

 . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 . GNU General Public License for more details.

 .

 . You should have received a copy of the GNU General Public License

 . along with this program; if not, write to the Free Software

 . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 .

 . Information contained in this file was obtained from the LAN91C111

 . manual from SMC.  To get a copy, if you really want one, you can find

 . information under www.smsc.com.

 .

 .

 . "Features" of the SMC chip:

 .   Integrated PHY/MAC for 10/100BaseT Operation

 .   Supports internal and external MII

 .   Integrated 8K packet memory

 .   EEPROM interface for configuration

 .

 .

 . author:

 .      Javier Castillo                 ( javier.castillo@urjc.es )

 .

 . Sources:

 .    o   smc91111.c by Erik Stahlman

 .

 . History:

 . 06/05/05  Javier Castillo  Modified smc91111.h to work with OR1200

 ----------------------------------------------------------------------------*/

#ifndef _SMC91111_H_

#define _SMC91111_H_

/*

 * This function may be called by the board specific initialisation code

 * in order to override the default mac address.

 */

extern void eth_init (void (*rec)(volatile unsigned char *, int));

extern void eth_send(void *buf, unsigned long len);

extern unsigned long eth_rx (void);

extern void eth_halt(void);

#define BANK_SELECT     14

#define SMC_SELECT_BANK(bank) REG16(ETH_BASE+BANK_SELECT)=bank

#define SMC_PHY_ADDR    0x0000

/* Transmit Control Register */

/* BANK 0  */

#define TCR_REG         0x0000 

#define TCR_ENABLE      0x0001  /* When 1 we can transmit */

#define TCR_LOOP        0x0002  /* Controls output pin LBK */

#define TCR_FORCOL      0x0004  /* When 1 will force a collision */

#define TCR_PAD_EN      0x0080  /* When 1 will pad tx frames < 64 bytes w/0 */

#define TCR_NOCRC       0x0100  /* When 1 will not append CRC to tx frames */

#define TCR_MON_CSN     0x0400  /* When 1 tx monitors carrier */

#define TCR_FDUPLX      0x0800  /* When 1 enables full duplex operation */

#define TCR_STP_SQET    0x1000  /* When 1 stops tx if Signal Quality Error */

#define TCR_EPH_LOOP    0x2000  /* When 1 enables EPH block loopback */

#define TCR_SWFDUP      0x8000  /* When 1 enables Switched Full Duplex mode */

#define TCR_CLEAR       0

#define TCR_DEFAULT     TCR_ENABLE | TCR_SWFDUP

/* EPH Status Register */

/* BANK 0  */

#define EPH_STATUS_REG  0x0002

#define ES_TX_SUC       0x0001  /* Last TX was successful */

#define ES_SNGL_COL     0x0002  /* Single collision detected for last tx */

#define ES_MUL_COL      0x0004  /* Multiple collisions detected for last tx */

#define ES_LTX_MULT     0x0008  /* Last tx was a multicast */

#define ES_16COL        0x0010  /* 16 Collisions Reached */

#define ES_SQET         0x0020  /* Signal Quality Error Test */

#define ES_LTXBRD       0x0040  /* Last tx was a broadcast */

#define ES_TXDEFR       0x0080  /* Transmit Deferred */

#define ES_LATCOL       0x0200  /* Late collision detected on last tx */

#define ES_LOSTCARR     0x0400  /* Lost Carrier Sense */

#define ES_EXC_DEF      0x0800  /* Excessive Deferral */

#define ES_CTR_ROL      0x1000  /* Counter Roll Over indication */

#define ES_LINK_OK      0x4000  /* Driven by inverted value of nLNK pin */

#define ES_TXUNRN       0x8000  /* Tx Underrun */

/* Receive Control Register */

/* BANK 0  */

#define RCR_REG         0x0004

#define RCR_RX_ABORT    0x0001  /* Set if a rx frame was aborted */

#define RCR_PRMS        0x0002  /* Enable promiscuous mode */

#define RCR_ALMUL       0x0004  /* When set accepts all multicast frames */

#define RCR_RXEN        0x0100  /* IFF this is set, we can receive packets */

#define RCR_STRIP_CRC   0x0200  /* When set strips CRC from rx packets */

#define RCR_ABORT_ENB   0x0200  /* When set will abort rx on collision */

#define RCR_FILT_CAR    0x0400  /* When set filters leading 12 bit s of carrier */

#define RCR_SOFTRST     0x8000  /* resets the chip */

#define RCR_CLEAR       0x0

#define RCR_DEFAULT     RCR_RXEN

/* Counter Register */

/* BANK 0  */

#define COUNTER_REG     0x0006

/* Memory Information Register */

/* BANK 0  */

#define MIR_REG         0x0008

/* Receive/Phy Control Register */

/* BANK 0  */

#define RPC_REG         0x000A

#define RPC_SPEED       0x2000  /* When 1 PHY is in 100Mbps mode. */

#define RPC_DPLX        0x1000  /* When 1 PHY is in Full-Duplex Mode */

#define RPC_ANEG        0x0800  /* When 1 PHY is in Auto-Negotiate Mode */

#define RPC_LSXA_SHFT   5       /* Bits to shift LS2A,LS1A,LS0A to lsb */

#define RPC_LSXB_SHFT   2       /* Bits to get LS2B,LS1B,LS0B to lsb */

#define RPC_LED_100_10  (0x00)  /* LED = 100Mbps OR's with 10Mbps link detect */

#define RPC_LED_RES     (0x01)  /* LED = Reserved */

#define RPC_LED_10      (0x02)  /* LED = 10Mbps link detect */

#define RPC_LED_FD      (0x03)  /* LED = Full Duplex Mode */

#define RPC_LED_TX_RX   (0x04)  /* LED = TX or RX packet occurred */

#define RPC_LED_100     (0x05)  /* LED = 100Mbps link dectect */

#define RPC_LED_TX      (0x06)  /* LED = TX packet occurred */

#define RPC_LED_RX      (0x07)  /* LED = RX packet occurred */

#define RPC_DEFAULT     RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX

/* Bank 0 0x000C is reserved */

/* Bank Select Register */

/* All Banks */

#define BSR_REG 0x000E

/* Configuration Reg */

/* BANK 1 */

#define CONFIG_REG      0x0000

#define CONFIG_EXT_PHY  0x0200  /* 1=external MII, 0=internal Phy */

#define CONFIG_GPCNTRL  0x0400  /* Inverse value drives pin nCNTRL */

#define CONFIG_NO_WAIT  0x1000  /* When 1 no extra wait states on ISA bus */

#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */

/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */

#define CONFIG_DEFAULT  (CONFIG_EPH_POWER_EN)

/* Base Address Register */

/* BANK 1 */

#define BASE_REG        0x0002

/* Individual Address Registers */

/* BANK 1 */

#define ADDR0_REG       0x0004

#define ADDR1_REG       0x0006

#define ADDR2_REG       0x0008

/* General Purpose Register */

/* BANK 1 */

#define GP_REG          0x000A

/* Control Register */

/* BANK 1 */

#define CTL_REG         0x000C

#define CTL_RCV_BAD     0x4000 /* When 1 bad CRC packets are received */

#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */

#define CTL_LE_ENABLE   0x0080 /* When 1 enables Link Error interrupt */

#define CTL_CR_ENABLE   0x0040 /* When 1 enables Counter Rollover interrupt */

#define CTL_TE_ENABLE   0x0020 /* When 1 enables Transmit Error interrupt */

#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */

#define CTL_RELOAD      0x0002 /* When set reads EEPROM into registers */

#define CTL_STORE       0x0001 /* When set stores registers into EEPROM */

#define CTL_DEFAULT     (0x1A10) /* Autorelease enabled*/

/* MMU Command Register */

/* BANK 2 */

#define MMU_CMD_REG     0x0000

#define MC_BUSY         1       /* When 1 the last release has not completed */

#define MC_NOP          (0<<5)  /* No Op */

#define MC_ALLOC        (1<<5)  /* OR with number of 256 byte packets */

#define MC_RESET        (2<<5)  /* Reset MMU to initial state */

#define MC_REMOVE       (3<<5)  /* Remove the current rx packet */

#define MC_RELEASE      (4<<5)  /* Remove and release the current rx packet */

#define MC_FREEPKT      (5<<5)  /* Release packet in PNR register */

#define MC_ENQUEUE      (6<<5)  /* Enqueue the packet for transmit */

#define MC_RSTTXFIFO    (7<<5)  /* Reset the TX FIFOs */

/* Packet Number Register */

/* BANK 2 */

#define PN_REG          0x0002

/* Allocation Result Register */

/* BANK 2 */

#define AR_REG          0x0003

#define AR_FAILED       0x80    /* Alocation Failed */

/* RX FIFO Ports Register */

/* BANK 2 */

#define RXFIFO_REG      0x0004  /* Must be read as a word */

#define RXFIFO_REMPTY   0x8000  /* RX FIFO Empty */

/* TX FIFO Ports Register */

/* BANK 2 */

#define TXFIFO_REG      RXFIFO_REG      /* Must be read as a word */

#define TXFIFO_TEMPTY   0x80    /* TX FIFO Empty */

/* Pointer Register */

/* BANK 2 */

#define PTR_REG         0x0006

#define PTR_RCV         0x8000 /* 1=Receive area, 0=Transmit area */

#define PTR_AUTOINC     0x4000 /* Auto increment the pointer on each access */

#define PTR_READ        0x2000 /* When 1 the operation is a read */

#define PTR_NOTEMPTY    0x0800 /* When 1 _do not_ write fifo DATA REG */

/* Data Register */

/* BANK 2 */

#define SMC91111_DATA_REG       0x0008

/* Interrupt Status/Acknowledge Register */

/* BANK 2 */

#define SMC91111_INT_REG        0x000C

/* Interrupt Mask Register */

/* BANK 2 */

#define IM_REG          0x000D

#define IM_MDINT        0x80 /* PHY MI Register 18 Interrupt */

#define IM_ERCV_INT     0x40 /* Early Receive Interrupt */

#define IM_EPH_INT      0x20 /* Set by Etheret Protocol Handler section */

#define IM_RX_OVRN_INT  0x10 /* Set by Receiver Overruns */

#define IM_ALLOC_INT    0x08 /* Set when allocation request is completed */

#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */

#define IM_TX_INT       0x02 /* Transmit Interrrupt */

#define IM_RCV_INT      0x01 /* Receive Interrupt */

/* Multicast Table Registers */

/* BANK 3 */

#define MCAST_REG1      0x0000

#define MCAST_REG2      0x0002

#define MCAST_REG3      0x0004

#define MCAST_REG4      0x0006

/* Management Interface Register (MII) */

/* BANK 3 */

#define MII_REG         0x0008

#define MII_MSK_CRS100  0x4000 /* Disables CRS100 detection during tx half dup */

#define MII_MDOE        0x0008 /* MII Output Enable */

#define MII_MCLK        0x0004 /* MII Clock, pin MDCLK */

#define MII_MDI         0x0002 /* MII Input, pin MDI */

#define MII_MDO         0x0001 /* MII Output, pin MDO */

/* Revision Register */

/* BANK 3 */

#define REV_REG         0x000A /* ( hi: chip id   low: rev # ) */

/* Early RCV Register */

/* BANK 3 */

/* this is NOT on SMC9192 */

#define ERCV_REG        0x000C

#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */

#define ERCV_THRESHOLD  0x001F /* ERCV Threshold Mask */

/* External Register */

/* BANK 7 */

#define EXT_REG         0x0000

/*

 . Transmit status bits

*/

#define TS_SUCCESS 0x0001

#define TS_LOSTCAR 0x0400

#define TS_LATCOL  0x0200

#define TS_16COL   0x0010

/*

 . Receive status bits

*/

#define RS_ALGNERR      0x8000

#define RS_BRODCAST     0x4000

#define RS_BADCRC       0x2000

#define RS_ODDFRAME     0x1000  /* bug: the LAN91C111 never sets this on receive */

#define RS_TOOLONG      0x0800

#define RS_TOOSHORT     0x0400

#define RS_MULTICAST    0x0001

#define RS_ERRORS       (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)

/* PHY Register Addresses (LAN91C111 Internal PHY) */

/* PHY Control Register */

#define PHY_CNTL_REG            0x00

#define PHY_CNTL_RST            0x8000  /* 1=PHY Reset */

#define PHY_CNTL_LPBK           0x4000  /* 1=PHY Loopback */

#define PHY_CNTL_SPEED          0x2000  /* 1=100Mbps, 0=10Mpbs */

#define PHY_CNTL_ANEG_EN        0x1000 /* 1=Enable Auto negotiation */

#define PHY_CNTL_PDN            0x0800  /* 1=PHY Power Down mode */

#define PHY_CNTL_MII_DIS        0x0400  /* 1=MII 4 bit interface disabled */

#define PHY_CNTL_ANEG_RST       0x0200 /* 1=Reset Auto negotiate */

#define PHY_CNTL_DPLX           0x0100  /* 1=Full Duplex, 0=Half Duplex */

#define PHY_CNTL_COLTST         0x0080  /* 1= MII Colision Test */

/* PHY Status Register */

#define PHY_STAT_REG            0x01

#define PHY_STAT_CAP_T4         0x8000  /* 1=100Base-T4 capable */

#define PHY_STAT_CAP_TXF        0x4000  /* 1=100Base-X full duplex capable */

#define PHY_STAT_CAP_TXH        0x2000  /* 1=100Base-X half duplex capable */

#define PHY_STAT_CAP_TF         0x1000  /* 1=10Mbps full duplex capable */

#define PHY_STAT_CAP_TH         0x0800  /* 1=10Mbps half duplex capable */

#define PHY_STAT_CAP_SUPR       0x0040  /* 1=recv mgmt frames with not preamble */

#define PHY_STAT_ANEG_ACK       0x0020  /* 1=ANEG has completed */

#define PHY_STAT_REM_FLT        0x0010  /* 1=Remote Fault detected */

#define PHY_STAT_CAP_ANEG       0x0008  /* 1=Auto negotiate capable */

#define PHY_STAT_LINK           0x0004  /* 1=valid link */

#define PHY_STAT_JAB            0x0002  /* 1=10Mbps jabber condition */

#define PHY_STAT_EXREG          0x0001  /* 1=extended registers implemented */

/* PHY Identifier Registers */

#define PHY_ID1_REG             0x02    /* PHY Identifier 1 */

#define PHY_ID2_REG             0x03    /* PHY Identifier 2 */

/* PHY Auto-Negotiation Advertisement Register */

#define PHY_AD_REG              0x04

#define PHY_AD_NP               0x8000  /* 1=PHY requests exchange of Next Page */

#define PHY_AD_ACK              0x4000  /* 1=got link code word from remote */

#define PHY_AD_RF               0x2000  /* 1=advertise remote fault */

#define PHY_AD_T4               0x0200  /* 1=PHY is capable of 100Base-T4 */

#define PHY_AD_TX_FDX           0x0100  /* 1=PHY is capable of 100Base-TX FDPLX */

#define PHY_AD_TX_HDX           0x0080  /* 1=PHY is capable of 100Base-TX HDPLX */

#define PHY_AD_10_FDX           0x0040  /* 1=PHY is capable of 10Base-T FDPLX */

#define PHY_AD_10_HDX           0x0020  /* 1=PHY is capable of 10Base-T HDPLX */

#define PHY_AD_CSMA             0x0001  /* 1=PHY is capable of 802.3 CMSA */

/* PHY Auto-negotiation Remote End Capability Register */

#define PHY_RMT_REG             0x05

/* Uses same bit definitions as PHY_AD_REG */

/* PHY Configuration Register 1 */

#define PHY_CFG1_REG            0x10

#define PHY_CFG1_LNKDIS         0x8000  /* 1=Rx Link Detect Function disabled */

#define PHY_CFG1_XMTDIS         0x4000  /* 1=TP Transmitter Disabled */

#define PHY_CFG1_XMTPDN         0x2000  /* 1=TP Transmitter Powered Down */

#define PHY_CFG1_BYPSCR         0x0400  /* 1=Bypass scrambler/descrambler */

#define PHY_CFG1_UNSCDS         0x0200  /* 1=Unscramble Idle Reception Disable */

#define PHY_CFG1_EQLZR          0x0100  /* 1=Rx Equalizer Disabled */

#define PHY_CFG1_CABLE          0x0080  /* 1=STP(150ohm), 0=UTP(100ohm) */

#define PHY_CFG1_RLVL0          0x0040  /* 1=Rx Squelch level reduced by 4.5db */

#define PHY_CFG1_TLVL_SHIFT     2       /* Transmit Output Level Adjust */

#define PHY_CFG1_TLVL_MASK      0x003C

#define PHY_CFG1_TRF_MASK       0x0003  /* Transmitter Rise/Fall time */

/* PHY Configuration Register 2 */

#define PHY_CFG2_REG            0x11

#define PHY_CFG2_APOLDIS        0x0020  /* 1=Auto Polarity Correction disabled */

#define PHY_CFG2_JABDIS         0x0010  /* 1=Jabber disabled */

#define PHY_CFG2_MREG           0x0008  /* 1=Multiple register access (MII mgt) */

#define PHY_CFG2_INTMDIO        0x0004  /* 1=Interrupt signaled with MDIO pulseo */

/* PHY Status Output (and Interrupt status) Register */

#define PHY_INT_REG             0x12    /* Status Output (Interrupt Status) */

#define PHY_INT_INT             0x8000  /* 1=bits have changed since last read */

#define PHY_INT_LNKFAIL         0x4000  /* 1=Link Not detected */

#define PHY_INT_LOSSSYNC        0x2000  /* 1=Descrambler has lost sync */

#define PHY_INT_CWRD            0x1000  /* 1=Invalid 4B5B code detected on rx */

#define PHY_INT_SSD             0x0800  /* 1=No Start Of Stream detected on rx */

#define PHY_INT_ESD             0x0400  /* 1=No End Of Stream detected on rx */

#define PHY_INT_RPOL            0x0200  /* 1=Reverse Polarity detected */

#define PHY_INT_JAB             0x0100  /* 1=Jabber detected */

#define PHY_INT_SPDDET          0x0080  /* 1=100Base-TX mode, 0=10Base-T mode */

#define PHY_INT_DPLXDET         0x0040  /* 1=Device in Full Duplex */

/* PHY Interrupt/Status Mask Register */

#define PHY_MASK_REG            0x13    /* Interrupt Mask */

/* Uses the same bit definitions as PHY_INT_REG */

#endif  /* _SMC_91111_H_ */