| 1 |
1625 |
jcastillo |
-- Documentation/cdrom/sjcd
|
| 2 |
|
|
80% of the work takes 20% of the time,
|
| 3 |
|
|
20% of the work takes 80% of the time...
|
| 4 |
|
|
(Murphy law)
|
| 5 |
|
|
|
| 6 |
|
|
Once started, training can not be stopped...
|
| 7 |
|
|
(StarWars)
|
| 8 |
|
|
|
| 9 |
|
|
This is the README for the sjcd cdrom driver, version 1.6.
|
| 10 |
|
|
|
| 11 |
|
|
This file is meant as a tips & tricks edge for the usage of the SANYO CDR-H94A
|
| 12 |
|
|
cdrom drive. It will grow as the questions arise. ;-)
|
| 13 |
|
|
For info on configuring the ISP16 sound card look at Documentation/cdrom/isp16.
|
| 14 |
|
|
|
| 15 |
|
|
The driver should work with any of the Panasonic, Sony or Mitsumi style
|
| 16 |
|
|
CDROM interface.
|
| 17 |
|
|
The cdrom interface on Media Magic's soft configurable sound card ISP16,
|
| 18 |
|
|
which used to be included in the driver, is now supported in a separate module.
|
| 19 |
|
|
This initialisation module will probably also work with other interfaces
|
| 20 |
|
|
based on an OPTi 82C928 or 82C929 chip (like MAD16 and Mozart): see the
|
| 21 |
|
|
documentation Documentation/cdrom/isp16.
|
| 22 |
|
|
|
| 23 |
|
|
The device major for sjcd is 18, and minor is 0. Create a block special
|
| 24 |
|
|
file in your /dev directory (e.g., /dev/sjcd) with these numbers.
|
| 25 |
|
|
(For those who don't know, being root and doing the following should do
|
| 26 |
|
|
the trick:
|
| 27 |
|
|
mknod -m 644 /dev/sjcd b 18 0
|
| 28 |
|
|
and mount the cdrom by /dev/sjcd).
|
| 29 |
|
|
|
| 30 |
|
|
The default configuration parameters are:
|
| 31 |
|
|
base address 0x340
|
| 32 |
|
|
no irq
|
| 33 |
|
|
no dma
|
| 34 |
|
|
(Actually the CDR-H94A doesn't know how to use irq and dma.)
|
| 35 |
|
|
As of version 1.2, setting base address at boot time is supported
|
| 36 |
|
|
through the use of command line options: type at the "boot:" prompt:
|
| 37 |
|
|
linux sjcd=
|
| 38 |
|
|
(where you would use the kernel labeled "linux" in lilo's configuration
|
| 39 |
|
|
file /etc/lilo.conf). You could also use 'append="sjcd="'
|
| 40 |
|
|
in the appropriate section of /etc/lilo.conf
|
| 41 |
|
|
If you're building a kernel yourself you can set your default base
|
| 42 |
|
|
i/o address with SJCD_BASE_ADDR in include/linux/sjcd.h.
|
| 43 |
|
|
|
| 44 |
|
|
The sjcd driver supports being loaded as a module. The following
|
| 45 |
|
|
command will set the base i/o address on the fly (assuming you
|
| 46 |
|
|
have installed the module in an appropriate place).
|
| 47 |
|
|
insmod sjcd.o sjcd_base=
|
| 48 |
|
|
|
| 49 |
|
|
|
| 50 |
|
|
Have fun!
|
| 51 |
|
|
|
| 52 |
|
|
If something is wrong, please email to vadim@rbrf.ru
|
| 53 |
|
|
or vadim@ipsun.ras.ru
|
| 54 |
|
|
or model@cecmow.enet.dec.com
|
| 55 |
|
|
or H.T.M.v.d.Maarel@marin.nl
|
| 56 |
|
|
|
| 57 |
|
|
It happens sometimes that Vadim is not reachable by mail. For these
|
| 58 |
|
|
instances, Eric van der Maarel will help too.
|
| 59 |
|
|
|
| 60 |
|
|
Vadim V. Model, Eric van der Maarel, Eberhard Moenkeberg
|
