URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [i960/] [init_cyjx.ld] - Blame information for rev 1777

Go to most recent revision | Details | Compare with Previous | View Log


/*
 *   This is the linker directive file to link an application to run
 *   under mon960 on the CY board with a Cx, Jx, or Hx processor.
 *   Programs linked with this file are downloaded to DRAM after the
 *   data area used by mon960.
 *   malloc() uses the symbols _heap_base and _heap_end to manage the heap.
 *   _heap_base is located at the end of program memory (.text + .data +.bss).
 *   _heap_size is defined as 0x20000.
 *   The C runtime stack starts at _heap_end and grows up.
 *   There must be enough room after the program memory in the dram for
 *   the program's heap and stack.
 */
 
MEMORY
   {
      dram  :  org = 0xA3C08000, len = 0x1ff8000   /* 4M less monitor */
      isram :  org = 0x00000100, len = 0x300
   }
 
 
SECTIONS
   {
      .text :
         {
         } >dram
 
      .data :
         {
         } >dram
 
      .bss :
         {
         } >dram
 
 
/* For R4.0 of the compiler & libraries, the following lines */
/* should not be enclosed in comments. */
/*
        SFP_AC :
        {
           fpem_CA_AC = .;
        } >isram
*/
   }
 
/* Bounds of heap: */
/* The heap may be placed in a separate memory region, if desired. */
 
/* _stackbase marks the base of the kernel's initial stack. We put it way at
 * the top of memory. */
__stext = __Btext;
__etext = __Etext;
__sdata = __Bdata;
__edata = __Edata;
__end = _end;
_stackbase = 0xa3ff0000;
 
ENTRY(_main)
/* Don't use low-level libs anymore */
/*
STARTUP ("crt960*")
HLL ()
SYSLIB ("libmn*")
SYSLIB ("libll*")
*/
FLOAT

Line No.	Rev	Author	Line
1	1625	jcastillo	`/*`
2			`* This is the linker directive file to link an application to run`
3			`* under mon960 on the CY board with a Cx, Jx, or Hx processor.`
4			`* Programs linked with this file are downloaded to DRAM after the`
5			`* data area used by mon960.`
6			`* malloc() uses the symbols _heap_base and _heap_end to manage the heap.`
7			`* _heap_base is located at the end of program memory (.text + .data +.bss).`
8			`* _heap_size is defined as 0x20000.`
9			`* The C runtime stack starts at _heap_end and grows up.`
10			`* There must be enough room after the program memory in the dram for`
11			`* the program's heap and stack.`
12			`*/`
13
14			`MEMORY`
15			`{`
16			`dram : org = 0xA3C08000, len = 0x1ff8000 /* 4M less monitor */`
17			`isram : org = 0x00000100, len = 0x300`
18			`}`
19
20
21			`SECTIONS`
22			`{`
23			`.text :`
24			`{`
25			`} >dram`
26
27			`.data :`
28			`{`
29			`} >dram`
30
31			`.bss :`
32			`{`
33			`} >dram`
34
35
36			`/* For R4.0 of the compiler & libraries, the following lines */`
37			`/* should not be enclosed in comments. */`
38			`/*`
39			`SFP_AC :`
40			`{`
41			`fpem_CA_AC = .;`
42			`} >isram`
43			`*/`
44			`}`
45
46			`/* Bounds of heap: */`
47			`/* The heap may be placed in a separate memory region, if desired. */`
48
49			`/* _stackbase marks the base of the kernel's initial stack. We put it way at`
50			`* the top of memory. */`
51			`__stext = __Btext;`
52			`__etext = __Etext;`
53			`__sdata = __Bdata;`
54			`__edata = __Edata;`
55			`__end = _end;`
56			`_stackbase = 0xa3ff0000;`
57
58			`ENTRY(_main)`
59			`/* Don't use low-level libs anymore */`
60			`/*`
61			`STARTUP ("crt960*")`
62			`HLL ()`
63			`SYSLIB ("libmn*")`
64			`SYSLIB ("libll*")`
65			`*/`
66			`FLOAT`

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [i960/] [init_cyjx.ld] - Blame information for rev 1777