Subversion Repositories or1k

#ifndef _IDE_MODES_H

#define _IDE_MODES_H

/*

 *  linux/drivers/block/ide_modes.h

 *

 *  Copyright (C) 1996  Linus Torvalds, Igor Abramov, and Mark Lord

 */

#include <linux/config.h>

/*

 * Shared data/functions for determining best PIO mode for an IDE drive.

 * Most of this stuff originally lived in cmd640.c, and changes to the

 * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid

 * breaking the fragile cmd640.c support.

 */

#if defined(CONFIG_BLK_DEV_CMD640) || defined(CONFIG_IDE_CHIPSETS)

/*

 * Standard (generic) timings for PIO modes, from ATA2 specification.

 * These timings are for access to the IDE data port register *only*.

 * Some drives may specify a mode, while also specifying a different

 * value for cycle_time (from drive identification data).

 */

typedef struct ide_pio_timings_s {

        int     setup_time;     /* Address setup (ns) minimum */

        int     active_time;    /* Active pulse (ns) minimum */

        int     cycle_time;     /* Cycle time (ns) minimum = (setup + active + recovery) */

} ide_pio_timings_t;

typedef struct ide_pio_data_s {

        byte pio_mode;

        byte use_iordy;

        byte overridden;

        byte blacklisted;

        unsigned int cycle_time;

} ide_pio_data_t;

#ifndef _IDE_C

int ide_scan_pio_blacklist (char *model);

byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d);

extern const ide_pio_timings_t ide_pio_timings[6];

#else /* _IDE_C */

const ide_pio_timings_t ide_pio_timings[6] = {

        { 70,   165,    600 },  /* PIO Mode 0 */

        { 50,   125,    383 },  /* PIO Mode 1 */

        { 30,   100,    240 },  /* PIO Mode 2 */

        { 30,   80,     180 },  /* PIO Mode 3 with IORDY */

        { 25,   70,     120 },  /* PIO Mode 4 with IORDY */

        { 20,   50,     100 }   /* PIO Mode 5 with IORDY (nonstandard) */

};

/*

 * Black list. Some drives incorrectly report their maximal PIO mode,

 * at least in respect to CMD640. Here we keep info on some known drives.

 */

static struct ide_pio_info {

        const char      *name;

        int             pio;

} ide_pio_blacklist [] = {

/*      { "Conner Peripherals 1275MB - CFS1275A", 4 }, */

        { "Conner Peripherals 540MB - CFS540A", 3 },

        { "WDC AC2700",  3 },

        { "WDC AC2540",  3 },

        { "WDC AC2420",  3 },

        { "WDC AC2340",  3 },

        { "WDC AC2250",  0 },

        { "WDC AC2200",  0 },

        { "WDC AC21200", 4 },

        { "WDC AC2120",  0 },

        { "WDC AC2850",  3 },

        { "WDC AC1270",  3 },

        { "WDC AC1170",  1 },

        { "WDC AC1210",  1 },

        { "WDC AC280",   0 },

/*      { "WDC AC21000", 4 }, */

        { "WDC AC31000", 3 },

        { "WDC AC31200", 3 },

/*      { "WDC AC31600", 4 }, */

        { "Maxtor 7131 AT", 1 },

        { "Maxtor 7171 AT", 1 },

        { "Maxtor 7213 AT", 1 },

        { "Maxtor 7245 AT", 1 },

        { "Maxtor 7345 AT", 1 },

        { "Maxtor 7546 AT", 3 },

        { "Maxtor 7540 AV", 3 },

        { "SAMSUNG SHD-3121A", 1 },

        { "SAMSUNG SHD-3122A", 1 },

        { "SAMSUNG SHD-3172A", 1 },

/*      { "ST51080A", 4 },

 *      { "ST51270A", 4 },

 *      { "ST31220A", 4 },

 *      { "ST31640A", 4 },

 *      { "ST32140A", 4 },

 *      { "ST3780A",  4 },

 */

        { "ST5660A",  3 },

        { "ST3660A",  3 },

        { "ST3630A",  3 },

        { "ST3655A",  3 },

        { "ST3391A",  3 },

        { "ST3390A",  1 },

        { "ST3600A",  1 },

        { "ST3290A",  0 },

        { "ST3144A",  0 },

        { "QUANTUM ELS127A", 0 },

        { "QUANTUM ELS170A", 0 },

        { "QUANTUM LPS240A", 0 },

        { "QUANTUM LPS210A", 3 },

        { "QUANTUM LPS270A", 3 },

        { "QUANTUM LPS365A", 3 },

        { "QUANTUM LPS540A", 3 },

        { "QUANTUM LIGHTNING 540A", 3 },

        { "QUANTUM LIGHTNING 730A", 3 },

        { "QUANTUM FIREBALL", 3 }, /* For models 540/640/1080/1280 */

                                   /* 1080A works fine in mode4 with triton */

        { NULL, 0 }

};

/*

 * This routine searches the ide_pio_blacklist for an entry

 * matching the start/whole of the supplied model name.

 *

 * Returns -1 if no match found.

 * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].

 */

int ide_scan_pio_blacklist (char *model)

{

        struct ide_pio_info *p;

        for (p = ide_pio_blacklist; p->name != NULL; p++) {

                if (strncmp(p->name, model, strlen(p->name)) == 0)

                        return p->pio;

        }

        return -1;

}

/*

 * This routine returns the recommended PIO settings for a given drive,

 * based on the drive->id information and the ide_pio_blacklist[].

 * This is used by most chipset support modules when "auto-tuning".

 */

/*

 * Drive PIO mode auto selection

 */

byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d)

{

        int pio_mode;

        int cycle_time = 0;

        int use_iordy = 0;

        struct hd_driveid* id = drive->id;

        int overridden  = 0;

        int blacklisted = 0;

        if (mode_wanted != 255) {

                pio_mode = mode_wanted;

        } else if (!drive->id) {

                pio_mode = 0;

        } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {

                overridden = 1;

                blacklisted = 1;

                use_iordy = (pio_mode > 2);

        } else {

                pio_mode = id->tPIO;

                if (pio_mode > 2) {     /* 2 is maximum allowed tPIO value */

                        pio_mode = 2;

                        overridden = 1;

                }

                if (id->field_valid & 2) {        /* drive implements ATA2? */

                        if (id->capability & 8) { /* drive supports use_iordy? */

                                use_iordy = 1;

                                cycle_time = id->eide_pio_iordy;

                                if (id->eide_pio_modes & 7) {

                                        overridden = 0;

                                        if (id->eide_pio_modes & 4)

                                                pio_mode = 5;

                                        else if (id->eide_pio_modes & 2)

                                                pio_mode = 4;

                                        else

                                                pio_mode = 3;

                                }

                        } else {

                                cycle_time = id->eide_pio;

                        }

                }

                /*

                 * Conservative "downgrade" for all pre-ATA2 drives

                 */

                if (pio_mode && pio_mode < 4) {

                        pio_mode--;

                        overridden = 1;

#if 0

                        use_iordy = (pio_mode > 2);

#endif

                        if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)

                                cycle_time = 0; /* use standard timing */

                }

        }

        if (pio_mode > max_mode) {

                pio_mode = max_mode;

                cycle_time = 0;

        }

        if (d) {

                d->pio_mode = pio_mode;

                d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;

                d->use_iordy = use_iordy;

                d->overridden = overridden;

                d->blacklisted = blacklisted;

        }

        return pio_mode;

}

#endif /* _IDE_C */

#endif /* defined(CONFIG_BLK_DEV_CMD640) || defined(CONFIG_IDE_CHIPSETS) */

#endif /* _IDE_MODES_H */