| 1 |
1626 |
jcastillo |
/*
|
| 2 |
|
|
* This file contains the driver for an XT hard disk controller
|
| 3 |
|
|
* (at least the DTC 5150X) for Linux.
|
| 4 |
|
|
*
|
| 5 |
|
|
* Author: Pat Mackinlay, pat@it.com.au
|
| 6 |
|
|
* Date: 29/09/92
|
| 7 |
|
|
*
|
| 8 |
|
|
* Revised: 01/01/93, ...
|
| 9 |
|
|
*
|
| 10 |
|
|
* Ref: DTC 5150X Controller Specification (thanks to Kevin Fowler,
|
| 11 |
|
|
* kevinf@agora.rain.com)
|
| 12 |
|
|
* Also thanks to: Salvador Abreu, Dave Thaler, Risto Kankkunen and
|
| 13 |
|
|
* Wim Van Dorst.
|
| 14 |
|
|
*
|
| 15 |
|
|
* Revised: 04/04/94 by Risto Kankkunen
|
| 16 |
|
|
* Moved the detection code from xd_init() to xd_geninit() as it needed
|
| 17 |
|
|
* interrupts enabled and Linus didn't want to enable them in that first
|
| 18 |
|
|
* phase. xd_geninit() is the place to do these kinds of things anyway,
|
| 19 |
|
|
* he says.
|
| 20 |
|
|
*
|
| 21 |
|
|
* Modularized: 04/10/96 by Todd Fries, tfries@umr.edu
|
| 22 |
|
|
*
|
| 23 |
|
|
* Revised: 13/12/97 by Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl
|
| 24 |
|
|
* Fixed some problems with disk initialization and module initiation.
|
| 25 |
|
|
* Recovered DMA access. Abridged messages. Added support for DTC5051CX,
|
| 26 |
|
|
* WD1002-27X & XEBEC controllers. Driver uses now some jumper settings.
|
| 27 |
|
|
* Added support for manual geometry setting (except Seagate controllers)
|
| 28 |
|
|
* in form:
|
| 29 |
|
|
* xd_geo=<cyl_xda>,<head_xda>,<sec_xda>[,<cyl_xdb>,<head_xdb>,<sec_xdb>]
|
| 30 |
|
|
* Extended ioctl() support.
|
| 31 |
|
|
*/
|
| 32 |
|
|
|
| 33 |
|
|
#include <linux/module.h>
|
| 34 |
|
|
#include <linux/errno.h>
|
| 35 |
|
|
#include <linux/sched.h>
|
| 36 |
|
|
#include <linux/mm.h>
|
| 37 |
|
|
#include <linux/fs.h>
|
| 38 |
|
|
#include <linux/kernel.h>
|
| 39 |
|
|
#include <linux/timer.h>
|
| 40 |
|
|
#include <linux/genhd.h>
|
| 41 |
|
|
#include <linux/ioport.h>
|
| 42 |
|
|
#include <linux/xd.h>
|
| 43 |
|
|
|
| 44 |
|
|
#include <asm/system.h>
|
| 45 |
|
|
#include <asm/io.h>
|
| 46 |
|
|
#include <asm/segment.h>
|
| 47 |
|
|
#include <asm/dma.h>
|
| 48 |
|
|
|
| 49 |
|
|
#define MAJOR_NR XT_DISK_MAJOR
|
| 50 |
|
|
#include <linux/blk.h>
|
| 51 |
|
|
|
| 52 |
|
|
#define XD_DONT_USE_DMA 0 /* Initial value. may be overriden using
|
| 53 |
|
|
"nodma" module option */
|
| 54 |
|
|
#define XD_INIT_DISK_DELAY 3 /* 30 ms delay during disk initialization */
|
| 55 |
|
|
|
| 56 |
|
|
/* Above may need to be increased if a problem with the 2nd drive detection
|
| 57 |
|
|
(ST11M controller) or resetting a controler (WD) appears */
|
| 58 |
|
|
|
| 59 |
|
|
XD_INFO xd_info[XD_MAXDRIVES];
|
| 60 |
|
|
|
| 61 |
|
|
/* If you try this driver and find that your card is not detected by the driver at bootup, you need to add your BIOS
|
| 62 |
|
|
signature and details to the following list of signatures. A BIOS signature is a string embedded into the first
|
| 63 |
|
|
few bytes of your controller's on-board ROM BIOS. To find out what yours is, use something like MS-DOS's DEBUG
|
| 64 |
|
|
command. Run DEBUG, and then you can examine your BIOS signature with:
|
| 65 |
|
|
|
| 66 |
|
|
d xxxx:0000
|
| 67 |
|
|
|
| 68 |
|
|
where xxxx is the segment of your controller (like C800 or D000 or something). On the ASCII dump at the right, you should
|
| 69 |
|
|
be able to see a string mentioning the manufacturer's copyright etc. Add this string into the table below. The parameters
|
| 70 |
|
|
in the table are, in order:
|
| 71 |
|
|
|
| 72 |
|
|
offset ; this is the offset (in bytes) from the start of your ROM where the signature starts
|
| 73 |
|
|
signature ; this is the actual text of the signature
|
| 74 |
|
|
xd_?_init_controller ; this is the controller init routine used by your controller
|
| 75 |
|
|
xd_?_init_drive ; this is the drive init routine used by your controller
|
| 76 |
|
|
|
| 77 |
|
|
The controllers directly supported at the moment are: DTC 5150x, WD 1004A27X, ST11M/R and override. If your controller is
|
| 78 |
|
|
made by the same manufacturer as one of these, try using the same init routines as they do. If that doesn't work, your
|
| 79 |
|
|
best bet is to use the "override" routines. These routines use a "portable" method of getting the disk's geometry, and
|
| 80 |
|
|
may work with your card. If none of these seem to work, try sending me some email and I'll see what I can do <grin>.
|
| 81 |
|
|
|
| 82 |
|
|
NOTE: You can now specify your XT controller's parameters from the command line in the form xd=TYPE,IRQ,IO,DMA. The driver
|
| 83 |
|
|
should be able to detect your drive's geometry from this info. (eg: xd=0,5,0x320,3 is the "standard"). */
|
| 84 |
|
|
|
| 85 |
|
|
#include <asm/page.h>
|
| 86 |
|
|
/* coppied from floppy.c */
|
| 87 |
|
|
static inline int __get_order(unsigned long size)
|
| 88 |
|
|
{
|
| 89 |
|
|
int order;
|
| 90 |
|
|
|
| 91 |
|
|
size = (size-1) >> (PAGE_SHIFT-1);
|
| 92 |
|
|
order = -1;
|
| 93 |
|
|
do {
|
| 94 |
|
|
size >>= 1;
|
| 95 |
|
|
order++;
|
| 96 |
|
|
} while (size);
|
| 97 |
|
|
return order;
|
| 98 |
|
|
}
|
| 99 |
|
|
#define xd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,__get_order(size))
|
| 100 |
|
|
#define xd_dma_mem_free(addr, size) free_pages(addr, __get_order(size))
|
| 101 |
|
|
static char *xd_dma_buffer = 0;
|
| 102 |
|
|
|
| 103 |
|
|
static XD_SIGNATURE xd_sigs[] = {
|
| 104 |
|
|
{ 0x0000,"Override geometry handler",NULL,xd_override_init_drive,"n unknown" }, /* Pat Mackinlay, pat@it.com.au */
|
| 105 |
|
|
{ 0x0008,"[BXD06 (C) DTC 17-MAY-1985]",xd_dtc_init_controller,xd_dtc5150cx_init_drive," DTC 5150CX" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
|
| 106 |
|
|
{ 0x000B,"CRD18A Not an IBM rom. (C) Copyright Data Technology Corp. 05/31/88",xd_dtc_init_controller,xd_dtc_init_drive," DTC 5150X" }, /* Todd Fries, tfries@umr.edu */
|
| 107 |
|
|
{ 0x000B,"CXD23A Not an IBM ROM (C)Copyright Data Technology Corp 12/03/88",xd_dtc_init_controller,xd_dtc_init_drive," DTC 5150X" }, /* Pat Mackinlay, pat@it.com.au */
|
| 108 |
|
|
{ 0x0008,"07/15/86 (C) Copyright 1986 Western Digital Corp",xd_wd_init_controller,xd_wd_init_drive," WD 1002AWX1" }, /* Ian Justman, citrus!ianj@csusac.ecs.csus.edu */
|
| 109 |
|
|
{ 0x0008,"07/15/86(C) Copyright 1986 Western Digital Corp.",xd_wd_init_controller,xd_wd_init_drive," WD 1002-27X" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
|
| 110 |
|
|
{ 0x0008,"06/24/88 (C) Copyright 1988 Western Digital Corp",xd_wd_init_controller,xd_wd_init_drive," WD 1004A27X" }, /* Dave Thaler, thalerd@engin.umich.edu */
|
| 111 |
|
|
{ 0x0008,"06/24/88(C) Copyright 1988 Western Digital Corp.",xd_wd_init_controller,xd_wd_init_drive," WDXT-GEN2" }, /* Dan Newcombe, newcombe@aa.csc.peachnet.edu */
|
| 112 |
|
|
{ 0x0015,"SEAGATE ST11 BIOS REVISION",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11M/R" }, /* Salvador Abreu, spa@fct.unl.pt */
|
| 113 |
|
|
{ 0x0010,"ST11R BIOS",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11M/R" }, /* Risto Kankkunen, risto.kankkunen@cs.helsinki.fi */
|
| 114 |
|
|
{ 0x0010,"ST11 BIOS v1.7",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11R" }, /* Alan Hourihane, alanh@fairlite.demon.co.uk */
|
| 115 |
|
|
{ 0x1000,"(c)Copyright 1987 SMS",xd_omti_init_controller,xd_omti_init_drive,"n OMTI 5520" }, /* Dirk Melchers, dirk@merlin.nbg.sub.org */
|
| 116 |
|
|
{ 0x0006,"COPYRIGHT XEBEC (C) 1984",xd_xebec_init_controller,xd_xebec_init_drive," XEBEC" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
|
| 117 |
|
|
};
|
| 118 |
|
|
static u_char *xd_bases[] =
|
| 119 |
|
|
{
|
| 120 |
|
|
(u_char *) 0xC8000,(u_char *) 0xCA000,(u_char *) 0xCC000,
|
| 121 |
|
|
(u_char *) 0xCE000,(u_char *) 0xD0000,(u_char *) 0xD2000,
|
| 122 |
|
|
(u_char *) 0xD4000,(u_char *) 0xD6000,(u_char *) 0xD8000,
|
| 123 |
|
|
(u_char *) 0xDA000,(u_char *) 0xDC000,(u_char *) 0xDE000,
|
| 124 |
|
|
(u_char *) 0xE0000
|
| 125 |
|
|
};
|
| 126 |
|
|
|
| 127 |
|
|
static struct hd_struct xd_struct[XD_MAXDRIVES << 6];
|
| 128 |
|
|
static int xd_sizes[XD_MAXDRIVES << 6], xd_access[XD_MAXDRIVES] = { 0, 0 };
|
| 129 |
|
|
static int xd_blocksizes[XD_MAXDRIVES << 6];
|
| 130 |
|
|
static struct gendisk xd_gendisk = {
|
| 131 |
|
|
MAJOR_NR, /* Major number */
|
| 132 |
|
|
"xd", /* Major name */
|
| 133 |
|
|
6, /* Bits to shift to get real from partition */
|
| 134 |
|
|
1 << 6, /* Number of partitions per real */
|
| 135 |
|
|
XD_MAXDRIVES, /* maximum number of real */
|
| 136 |
|
|
#ifdef MODULE
|
| 137 |
|
|
NULL, /* called from init_module */
|
| 138 |
|
|
#else
|
| 139 |
|
|
xd_geninit, /* init function */
|
| 140 |
|
|
#endif
|
| 141 |
|
|
xd_struct, /* hd struct */
|
| 142 |
|
|
xd_sizes, /* block sizes */
|
| 143 |
|
|
0, /* number */
|
| 144 |
|
|
(void *) xd_info, /* internal */
|
| 145 |
|
|
NULL /* next */
|
| 146 |
|
|
};
|
| 147 |
|
|
static struct file_operations xd_fops = {
|
| 148 |
|
|
NULL, /* lseek - default */
|
| 149 |
|
|
block_read, /* read - general block-dev read */
|
| 150 |
|
|
block_write, /* write - general block-dev write */
|
| 151 |
|
|
NULL, /* readdir - bad */
|
| 152 |
|
|
NULL, /* select */
|
| 153 |
|
|
xd_ioctl, /* ioctl */
|
| 154 |
|
|
NULL, /* mmap */
|
| 155 |
|
|
xd_open, /* open */
|
| 156 |
|
|
xd_release, /* release */
|
| 157 |
|
|
block_fsync /* fsync */
|
| 158 |
|
|
};
|
| 159 |
|
|
static struct wait_queue *xd_wait_int = NULL, *xd_wait_open = NULL;
|
| 160 |
|
|
static u_char xd_valid[XD_MAXDRIVES] = { 0,0 };
|
| 161 |
|
|
static u_char xd_drives = 0, xd_irq = 5, xd_dma = 3, xd_maxsectors;
|
| 162 |
|
|
static u_char xd_override = 0, xd_type = 0;
|
| 163 |
|
|
static u_short xd_iobase = 0x320;
|
| 164 |
|
|
static int xd_geo[XD_MAXDRIVES*3] = { 0,0,0,0,0,0 };
|
| 165 |
|
|
|
| 166 |
|
|
static int xd[5];
|
| 167 |
|
|
|
| 168 |
|
|
static volatile int xdc_busy = 0;
|
| 169 |
|
|
static struct wait_queue *xdc_wait = NULL;
|
| 170 |
|
|
|
| 171 |
|
|
typedef void (*timeout_fn)(unsigned long);
|
| 172 |
|
|
static struct timer_list xd_timer = { NULL, NULL, 0, 0, (timeout_fn) xd_wakeup },
|
| 173 |
|
|
xd_watchdog_int = { NULL, NULL, 0, 0, (timeout_fn) xd_watchdog };
|
| 174 |
|
|
|
| 175 |
|
|
static volatile u_char xd_error;
|
| 176 |
|
|
static int nodma = XD_DONT_USE_DMA;
|
| 177 |
|
|
|
| 178 |
|
|
/* xd_init: register the block device number and set up pointer tables */
|
| 179 |
|
|
int xd_init (void)
|
| 180 |
|
|
{
|
| 181 |
|
|
if (register_blkdev(MAJOR_NR,"xd",&xd_fops)) {
|
| 182 |
|
|
printk("xd_init: unable to get major number %d\n",MAJOR_NR);
|
| 183 |
|
|
return -1;
|
| 184 |
|
|
}
|
| 185 |
|
|
blk_dev[MAJOR_NR].request_fn = DEVICE_REQUEST;
|
| 186 |
|
|
read_ahead[MAJOR_NR] = 8; /* 8 sector (4kB) read ahead */
|
| 187 |
|
|
xd_gendisk.next = gendisk_head;
|
| 188 |
|
|
gendisk_head = &xd_gendisk;
|
| 189 |
|
|
|
| 190 |
|
|
return 0;
|
| 191 |
|
|
}
|
| 192 |
|
|
|
| 193 |
|
|
/* xd_detect: scan the possible BIOS ROM locations for the signature strings */
|
| 194 |
|
|
static u_char xd_detect (u_char *controller,u_char **address)
|
| 195 |
|
|
{
|
| 196 |
|
|
u_char i,j,found = 0;
|
| 197 |
|
|
|
| 198 |
|
|
if (xd_override)
|
| 199 |
|
|
{
|
| 200 |
|
|
*controller = xd_type;
|
| 201 |
|
|
*address = NULL;
|
| 202 |
|
|
return(1);
|
| 203 |
|
|
}
|
| 204 |
|
|
|
| 205 |
|
|
for (i = 0; i < (sizeof(xd_bases) / sizeof(xd_bases[0])) && !found; i++)
|
| 206 |
|
|
for (j = 1; j < (sizeof(xd_sigs) / sizeof(xd_sigs[0])) && !found; j++)
|
| 207 |
|
|
if (!memcmp(xd_bases[i] + xd_sigs[j].offset,xd_sigs[j].string,strlen(xd_sigs[j].string))) {
|
| 208 |
|
|
*controller = j;
|
| 209 |
|
|
xd_type = j;
|
| 210 |
|
|
*address = xd_bases[i];
|
| 211 |
|
|
found++;
|
| 212 |
|
|
}
|
| 213 |
|
|
return (found);
|
| 214 |
|
|
}
|
| 215 |
|
|
|
| 216 |
|
|
/* xd_geninit: grab the IRQ and DMA channel, initialise the drives */
|
| 217 |
|
|
/* and set up the "raw" device entries in the table */
|
| 218 |
|
|
static void xd_geninit (struct gendisk *ignored)
|
| 219 |
|
|
{
|
| 220 |
|
|
u_char i,controller,*address;
|
| 221 |
|
|
|
| 222 |
|
|
if (xd_detect(&controller,&address)) {
|
| 223 |
|
|
|
| 224 |
|
|
printk("xd_geninit: detected a%s controller (type %d) at address %p\n",xd_sigs[controller].name,controller,address);
|
| 225 |
|
|
if (check_region(xd_iobase,4)) {
|
| 226 |
|
|
printk("xd: Ports at 0x%x are not available\n",xd_iobase);
|
| 227 |
|
|
return;
|
| 228 |
|
|
}
|
| 229 |
|
|
request_region(xd_iobase,4,"xd");
|
| 230 |
|
|
if (controller)
|
| 231 |
|
|
xd_sigs[controller].init_controller(address);
|
| 232 |
|
|
xd_drives = xd_initdrives(xd_sigs[controller].init_drive);
|
| 233 |
|
|
|
| 234 |
|
|
printk("xd_geninit: detected %d hard drive%s (using IRQ%d & DMA%d)\n",xd_drives,xd_drives == 1 ? "" : "s",xd_irq,xd_dma);
|
| 235 |
|
|
for (i = 0; i < xd_drives; i++)
|
| 236 |
|
|
printk("xd_geninit: drive %d geometry - heads = %d, cylinders = %d, sectors = %d\n",i,xd_info[i].heads,xd_info[i].cylinders,xd_info[i].sectors);
|
| 237 |
|
|
|
| 238 |
|
|
}
|
| 239 |
|
|
if (xd_drives) {
|
| 240 |
|
|
if (!request_irq(xd_irq,xd_interrupt_handler, 0, "XT harddisk", NULL)) {
|
| 241 |
|
|
if (request_dma(xd_dma,"xd")) {
|
| 242 |
|
|
printk("xd_geninit: unable to get DMA%d\n",xd_dma);
|
| 243 |
|
|
free_irq(xd_irq, NULL);
|
| 244 |
|
|
}
|
| 245 |
|
|
}
|
| 246 |
|
|
else
|
| 247 |
|
|
printk("xd_geninit: unable to get IRQ%d\n",xd_irq);
|
| 248 |
|
|
}
|
| 249 |
|
|
|
| 250 |
|
|
for (i = 0; i < xd_drives; i++) {
|
| 251 |
|
|
xd_struct[i << 6].nr_sects = xd_info[i].heads * xd_info[i].cylinders * xd_info[i].sectors;
|
| 252 |
|
|
xd_valid[i] = 1;
|
| 253 |
|
|
}
|
| 254 |
|
|
|
| 255 |
|
|
xd_gendisk.nr_real = xd_drives;
|
| 256 |
|
|
|
| 257 |
|
|
for(i=0;i<(XD_MAXDRIVES << 6);i++) xd_blocksizes[i] = 1024;
|
| 258 |
|
|
blksize_size[MAJOR_NR] = xd_blocksizes;
|
| 259 |
|
|
}
|
| 260 |
|
|
|
| 261 |
|
|
/* xd_open: open a device */
|
| 262 |
|
|
static int xd_open (struct inode *inode,struct file *file)
|
| 263 |
|
|
{
|
| 264 |
|
|
int dev = DEVICE_NR(inode->i_rdev);
|
| 265 |
|
|
|
| 266 |
|
|
if (dev < xd_drives) {
|
| 267 |
|
|
while (!xd_valid[dev])
|
| 268 |
|
|
sleep_on(&xd_wait_open);
|
| 269 |
|
|
|
| 270 |
|
|
#ifdef MODULE
|
| 271 |
|
|
MOD_INC_USE_COUNT;
|
| 272 |
|
|
#endif /* MODULE */
|
| 273 |
|
|
|
| 274 |
|
|
xd_access[dev]++;
|
| 275 |
|
|
|
| 276 |
|
|
return (0);
|
| 277 |
|
|
}
|
| 278 |
|
|
else
|
| 279 |
|
|
return -ENXIO;
|
| 280 |
|
|
}
|
| 281 |
|
|
|
| 282 |
|
|
/* do_xd_request: handle an incoming request */
|
| 283 |
|
|
static void do_xd_request (void)
|
| 284 |
|
|
{
|
| 285 |
|
|
u_int block,count,retry;
|
| 286 |
|
|
int code;
|
| 287 |
|
|
|
| 288 |
|
|
sti();
|
| 289 |
|
|
if (xdc_busy)
|
| 290 |
|
|
return;
|
| 291 |
|
|
while (code = 0, CURRENT) {
|
| 292 |
|
|
INIT_REQUEST; /* do some checking on the request structure */
|
| 293 |
|
|
|
| 294 |
|
|
if (CURRENT_DEV < xd_drives
|
| 295 |
|
|
&& CURRENT->sector + CURRENT->nr_sectors
|
| 296 |
|
|
<= xd_struct[MINOR(CURRENT->rq_dev)].nr_sects) {
|
| 297 |
|
|
block = CURRENT->sector + xd_struct[MINOR(CURRENT->rq_dev)].start_sect;
|
| 298 |
|
|
count = CURRENT->nr_sectors;
|
| 299 |
|
|
|
| 300 |
|
|
switch (CURRENT->cmd) {
|
| 301 |
|
|
case READ:
|
| 302 |
|
|
case WRITE:
|
| 303 |
|
|
for (retry = 0; (retry < XD_RETRIES) && !code; retry++)
|
| 304 |
|
|
code = xd_readwrite(CURRENT->cmd,CURRENT_DEV,CURRENT->buffer,block,count);
|
| 305 |
|
|
break;
|
| 306 |
|
|
default:
|
| 307 |
|
|
printk("do_xd_request: unknown request\n"); break;
|
| 308 |
|
|
}
|
| 309 |
|
|
}
|
| 310 |
|
|
end_request(code); /* wrap up, 0 = fail, 1 = success */
|
| 311 |
|
|
}
|
| 312 |
|
|
}
|
| 313 |
|
|
|
| 314 |
|
|
static int write_fs_long (unsigned long useraddr, long value)
|
| 315 |
|
|
{
|
| 316 |
|
|
int err;
|
| 317 |
|
|
|
| 318 |
|
|
if (NULL == (long *)useraddr)
|
| 319 |
|
|
return -EINVAL;
|
| 320 |
|
|
if ((err = verify_area(VERIFY_WRITE, (long *)useraddr, sizeof(long))))
|
| 321 |
|
|
return err;
|
| 322 |
|
|
put_user((unsigned)value, (long *) useraddr);
|
| 323 |
|
|
return 0;
|
| 324 |
|
|
}
|
| 325 |
|
|
|
| 326 |
|
|
/* xd_ioctl: handle device ioctl's */
|
| 327 |
|
|
static int xd_ioctl (struct inode *inode,struct file *file,u_int cmd,u_long arg)
|
| 328 |
|
|
{
|
| 329 |
|
|
XD_GEOMETRY *geometry = (XD_GEOMETRY *) arg;
|
| 330 |
|
|
int dev = DEVICE_NR(inode->i_rdev),err;
|
| 331 |
|
|
|
| 332 |
|
|
if (inode && (dev < xd_drives))
|
| 333 |
|
|
switch (cmd) {
|
| 334 |
|
|
case HDIO_GETGEO:
|
| 335 |
|
|
if (arg) {
|
| 336 |
|
|
if ((err = verify_area(VERIFY_WRITE,geometry,sizeof(*geometry))))
|
| 337 |
|
|
return (err);
|
| 338 |
|
|
put_user(xd_info[dev].heads, &geometry->heads);
|
| 339 |
|
|
put_user(xd_info[dev].sectors, &geometry->sectors);
|
| 340 |
|
|
put_user(xd_info[dev].cylinders, &geometry->cylinders);
|
| 341 |
|
|
put_user(xd_struct[MINOR(inode->i_rdev)].start_sect,&geometry->start);
|
| 342 |
|
|
|
| 343 |
|
|
return (0);
|
| 344 |
|
|
}
|
| 345 |
|
|
break;
|
| 346 |
|
|
case BLKRASET:
|
| 347 |
|
|
if(!suser())
|
| 348 |
|
|
return -EACCES;
|
| 349 |
|
|
if(!(inode->i_rdev))
|
| 350 |
|
|
return -EINVAL;
|
| 351 |
|
|
if(arg > 0xff)
|
| 352 |
|
|
return -EINVAL;
|
| 353 |
|
|
read_ahead[MAJOR(inode->i_rdev)] = arg;
|
| 354 |
|
|
return 0;
|
| 355 |
|
|
case BLKRAGET:
|
| 356 |
|
|
return write_fs_long(arg, read_ahead[MAJOR(inode->i_rdev)]);
|
| 357 |
|
|
case BLKGETSIZE:
|
| 358 |
|
|
if (arg) {
|
| 359 |
|
|
if ((err = verify_area(VERIFY_WRITE,(long *) arg,sizeof(long))))
|
| 360 |
|
|
return (err);
|
| 361 |
|
|
put_user(xd_struct[MINOR(inode->i_rdev)].nr_sects,(long *) arg);
|
| 362 |
|
|
|
| 363 |
|
|
return (0);
|
| 364 |
|
|
}
|
| 365 |
|
|
break;
|
| 366 |
|
|
case BLKFLSBUF:
|
| 367 |
|
|
if(!suser()) return -EACCES;
|
| 368 |
|
|
if(!(inode->i_rdev))
|
| 369 |
|
|
return -EINVAL;
|
| 370 |
|
|
fsync_dev(inode->i_rdev);
|
| 371 |
|
|
invalidate_buffers(inode->i_rdev);
|
| 372 |
|
|
return 0;
|
| 373 |
|
|
case HDIO_SET_DMA:
|
| 374 |
|
|
if (!suser())
|
| 375 |
|
|
return -EACCES;
|
| 376 |
|
|
if (xdc_busy)
|
| 377 |
|
|
return -EBUSY;
|
| 378 |
|
|
nodma = !arg;
|
| 379 |
|
|
if (nodma && xd_dma_buffer) {
|
| 380 |
|
|
xd_dma_mem_free((unsigned long)xd_dma_buffer, xd_maxsectors * 0x200);
|
| 381 |
|
|
xd_dma_buffer = 0;
|
| 382 |
|
|
}
|
| 383 |
|
|
return 0;
|
| 384 |
|
|
case HDIO_GET_DMA:
|
| 385 |
|
|
return write_fs_long(arg, !nodma);
|
| 386 |
|
|
case HDIO_GET_MULTCOUNT:
|
| 387 |
|
|
return write_fs_long(arg, xd_maxsectors);
|
| 388 |
|
|
case BLKRRPART:
|
| 389 |
|
|
return (xd_reread_partitions(inode->i_rdev));
|
| 390 |
|
|
RO_IOCTLS(inode->i_rdev,arg);
|
| 391 |
|
|
}
|
| 392 |
|
|
return (-EINVAL);
|
| 393 |
|
|
}
|
| 394 |
|
|
|
| 395 |
|
|
/* xd_release: release the device */
|
| 396 |
|
|
static void xd_release (struct inode *inode, struct file *file)
|
| 397 |
|
|
{
|
| 398 |
|
|
int dev = DEVICE_NR(inode->i_rdev);
|
| 399 |
|
|
|
| 400 |
|
|
if (dev < xd_drives) {
|
| 401 |
|
|
sync_dev(inode->i_rdev);
|
| 402 |
|
|
xd_access[dev]--;
|
| 403 |
|
|
|
| 404 |
|
|
#ifdef MODULE
|
| 405 |
|
|
MOD_DEC_USE_COUNT;
|
| 406 |
|
|
#endif /* MODULE */
|
| 407 |
|
|
|
| 408 |
|
|
}
|
| 409 |
|
|
}
|
| 410 |
|
|
|
| 411 |
|
|
/* xd_reread_partitions: rereads the partition table from a drive */
|
| 412 |
|
|
static int xd_reread_partitions(kdev_t dev)
|
| 413 |
|
|
{
|
| 414 |
|
|
int target = DEVICE_NR(dev);
|
| 415 |
|
|
int start = target << xd_gendisk.minor_shift;
|
| 416 |
|
|
int partition;
|
| 417 |
|
|
|
| 418 |
|
|
cli(); xd_valid[target] = (xd_access[target] != 1); sti();
|
| 419 |
|
|
if (xd_valid[target])
|
| 420 |
|
|
return (-EBUSY);
|
| 421 |
|
|
|
| 422 |
|
|
for (partition = xd_gendisk.max_p - 1; partition >= 0; partition--) {
|
| 423 |
|
|
int minor = (start | partition);
|
| 424 |
|
|
kdev_t devp = MKDEV(MAJOR_NR, minor);
|
| 425 |
|
|
sync_dev(devp);
|
| 426 |
|
|
invalidate_inodes(devp);
|
| 427 |
|
|
invalidate_buffers(devp);
|
| 428 |
|
|
xd_gendisk.part[minor].start_sect = 0;
|
| 429 |
|
|
xd_gendisk.part[minor].nr_sects = 0;
|
| 430 |
|
|
};
|
| 431 |
|
|
|
| 432 |
|
|
xd_gendisk.part[start].nr_sects = xd_info[target].heads * xd_info[target].cylinders * xd_info[target].sectors;
|
| 433 |
|
|
resetup_one_dev(&xd_gendisk,target);
|
| 434 |
|
|
|
| 435 |
|
|
xd_valid[target] = 1;
|
| 436 |
|
|
wake_up(&xd_wait_open);
|
| 437 |
|
|
|
| 438 |
|
|
return (0);
|
| 439 |
|
|
}
|
| 440 |
|
|
|
| 441 |
|
|
/* xd_readwrite: handle a read/write request */
|
| 442 |
|
|
static int xd_readwrite (u_char operation,u_char drive,char *buffer,u_int block,u_int count)
|
| 443 |
|
|
{
|
| 444 |
|
|
u_char cmdblk[6],sense[4];
|
| 445 |
|
|
u_short track,cylinder;
|
| 446 |
|
|
u_char head,sector,control,mode = PIO_MODE,temp;
|
| 447 |
|
|
char **real_buffer;
|
| 448 |
|
|
register int i;
|
| 449 |
|
|
|
| 450 |
|
|
#ifdef DEBUG_READWRITE
|
| 451 |
|
|
printk("xd_readwrite: operation = %s, drive = %d, buffer = 0x%X, block = %d, count = %d\n",operation == READ ? "read" : "write",drive,buffer,block,count);
|
| 452 |
|
|
#endif /* DEBUG_READWRITE */
|
| 453 |
|
|
|
| 454 |
|
|
control = xd_info[drive].control;
|
| 455 |
|
|
if (!xd_dma_buffer)
|
| 456 |
|
|
xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
|
| 457 |
|
|
while (count) {
|
| 458 |
|
|
temp = count < xd_maxsectors ? count : xd_maxsectors;
|
| 459 |
|
|
|
| 460 |
|
|
track = block / xd_info[drive].sectors;
|
| 461 |
|
|
head = track % xd_info[drive].heads;
|
| 462 |
|
|
cylinder = track / xd_info[drive].heads;
|
| 463 |
|
|
sector = block % xd_info[drive].sectors;
|
| 464 |
|
|
|
| 465 |
|
|
#ifdef DEBUG_READWRITE
|
| 466 |
|
|
printk("xd_readwrite: drive = %d, head = %d, cylinder = %d, sector = %d, count = %d\n",drive,head,cylinder,sector,temp);
|
| 467 |
|
|
#endif /* DEBUG_READWRITE */
|
| 468 |
|
|
|
| 469 |
|
|
if (xd_dma_buffer) {
|
| 470 |
|
|
mode = xd_setup_dma(operation == READ ? DMA_MODE_READ : DMA_MODE_WRITE,(u_char *)(xd_dma_buffer),temp * 0x200);
|
| 471 |
|
|
real_buffer = &xd_dma_buffer;
|
| 472 |
|
|
for (i=0; i < (temp * 0x200); i++)
|
| 473 |
|
|
xd_dma_buffer[i] = buffer[i];
|
| 474 |
|
|
}
|
| 475 |
|
|
else
|
| 476 |
|
|
real_buffer = &buffer;
|
| 477 |
|
|
|
| 478 |
|
|
xd_build(cmdblk,operation == READ ? CMD_READ : CMD_WRITE,drive,head,cylinder,sector,temp & 0xFF,control);
|
| 479 |
|
|
|
| 480 |
|
|
switch (xd_command(cmdblk,mode,(u_char *)(*real_buffer),(u_char *)(*real_buffer),sense,XD_TIMEOUT)) {
|
| 481 |
|
|
case 1:
|
| 482 |
|
|
printk("xd_readwrite: timeout, recalibrating drive\n");
|
| 483 |
|
|
xd_recalibrate(drive);
|
| 484 |
|
|
return (0);
|
| 485 |
|
|
case 2:
|
| 486 |
|
|
switch ((sense[0] & 0x30) >> 4) {
|
| 487 |
|
|
case 0: printk("xd_readwrite: drive error, code = 0x%X",sense[0] & 0x0F); break;
|
| 488 |
|
|
case 1: printk("xd_readwrite: controller error, code = 0x%X",sense[0] & 0x0F); break;
|
| 489 |
|
|
case 2: printk("xd_readwrite: command error, code = 0x%X",sense[0] & 0x0F); break;
|
| 490 |
|
|
case 3: printk("xd_readwrite: miscellaneous error, code = 0x%X",sense[0] & 0x0F); break;
|
| 491 |
|
|
}
|
| 492 |
|
|
if (sense[0] & 0x80)
|
| 493 |
|
|
printk(" - drive = %d, head = %d, cylinder = %d, sector = %d\n",sense[1] & 0xE0,sense[1] & 0x1F,((sense[2] & 0xC0) << 2) | sense[3],sense[2] & 0x3F);
|
| 494 |
|
|
else
|
| 495 |
|
|
printk(" - no valid disk address\n");
|
| 496 |
|
|
return (0);
|
| 497 |
|
|
}
|
| 498 |
|
|
if (xd_dma_buffer)
|
| 499 |
|
|
for (i=0; i < (temp * 0x200); i++)
|
| 500 |
|
|
buffer[i] = xd_dma_buffer[i];
|
| 501 |
|
|
|
| 502 |
|
|
count -= temp, buffer += temp * 0x200, block += temp;
|
| 503 |
|
|
}
|
| 504 |
|
|
return (1);
|
| 505 |
|
|
}
|
| 506 |
|
|
|
| 507 |
|
|
/* xd_recalibrate: recalibrate a given drive and reset controller if necessary */
|
| 508 |
|
|
static void xd_recalibrate (u_char drive)
|
| 509 |
|
|
{
|
| 510 |
|
|
u_char cmdblk[6];
|
| 511 |
|
|
|
| 512 |
|
|
xd_build(cmdblk,CMD_RECALIBRATE,drive,0,0,0,0,0);
|
| 513 |
|
|
if (xd_command(cmdblk,PIO_MODE,0,0,0,XD_TIMEOUT * 8))
|
| 514 |
|
|
printk("xd_recalibrate: warning! error recalibrating, controller may be unstable\n");
|
| 515 |
|
|
}
|
| 516 |
|
|
|
| 517 |
|
|
/* xd_interrupt_handler: interrupt service routine */
|
| 518 |
|
|
static void xd_interrupt_handler(int irq, void *dev_id, struct pt_regs * regs)
|
| 519 |
|
|
{
|
| 520 |
|
|
if (inb(XD_STATUS) & STAT_INTERRUPT) { /* check if it was our device */
|
| 521 |
|
|
#ifdef DEBUG_OTHER
|
| 522 |
|
|
printk("xd_interrupt_handler: interrupt detected\n");
|
| 523 |
|
|
#endif /* DEBUG_OTHER */
|
| 524 |
|
|
outb(0,XD_CONTROL); /* acknowledge interrupt */
|
| 525 |
|
|
wake_up(&xd_wait_int); /* and wake up sleeping processes */
|
| 526 |
|
|
}
|
| 527 |
|
|
else
|
| 528 |
|
|
printk("xd_interrupt_handler: unexpected interrupt\n");
|
| 529 |
|
|
}
|
| 530 |
|
|
|
| 531 |
|
|
/* xd_setup_dma: set up the DMA controller for a data transfer */
|
| 532 |
|
|
static u_char xd_setup_dma (u_char mode,u_char *buffer,u_int count)
|
| 533 |
|
|
{
|
| 534 |
|
|
if (nodma)
|
| 535 |
|
|
return (PIO_MODE);
|
| 536 |
|
|
if (((u_int) buffer & 0xFFFF0000) != (((u_int) buffer + count) & 0xFFFF0000)) {
|
| 537 |
|
|
#ifdef DEBUG_OTHER
|
| 538 |
|
|
printk("xd_setup_dma: using PIO, transfer overlaps 64k boundary\n");
|
| 539 |
|
|
#endif /* DEBUG_OTHER */
|
| 540 |
|
|
return (PIO_MODE);
|
| 541 |
|
|
}
|
| 542 |
|
|
disable_dma(xd_dma);
|
| 543 |
|
|
clear_dma_ff(xd_dma);
|
| 544 |
|
|
set_dma_mode(xd_dma,mode);
|
| 545 |
|
|
set_dma_addr(xd_dma,(u_int) buffer);
|
| 546 |
|
|
set_dma_count(xd_dma,count);
|
| 547 |
|
|
|
| 548 |
|
|
return (DMA_MODE); /* use DMA and INT */
|
| 549 |
|
|
}
|
| 550 |
|
|
|
| 551 |
|
|
/* xd_build: put stuff into an array in a format suitable for the controller */
|
| 552 |
|
|
static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control)
|
| 553 |
|
|
{
|
| 554 |
|
|
cmdblk[0] = command;
|
| 555 |
|
|
cmdblk[1] = ((drive & 0x07) << 5) | (head & 0x1F);
|
| 556 |
|
|
cmdblk[2] = ((cylinder & 0x300) >> 2) | (sector & 0x3F);
|
| 557 |
|
|
cmdblk[3] = cylinder & 0xFF;
|
| 558 |
|
|
cmdblk[4] = count;
|
| 559 |
|
|
cmdblk[5] = control;
|
| 560 |
|
|
|
| 561 |
|
|
return (cmdblk);
|
| 562 |
|
|
}
|
| 563 |
|
|
|
| 564 |
|
|
/* xd_wakeup is called from timer interrupt */
|
| 565 |
|
|
static void xd_wakeup (void)
|
| 566 |
|
|
{
|
| 567 |
|
|
wake_up(&xdc_wait);
|
| 568 |
|
|
}
|
| 569 |
|
|
|
| 570 |
|
|
/* xd_wakeup is called from timer interrupt */
|
| 571 |
|
|
static void xd_watchdog (void)
|
| 572 |
|
|
{
|
| 573 |
|
|
xd_error = 1;
|
| 574 |
|
|
wake_up(&xd_wait_int);
|
| 575 |
|
|
}
|
| 576 |
|
|
|
| 577 |
|
|
/* xd_waitport: waits until port & mask == flags or a timeout occurs. return 1 for a timeout */
|
| 578 |
|
|
static inline u_char xd_waitport (u_short port,u_char flags,u_char mask,u_long timeout)
|
| 579 |
|
|
{
|
| 580 |
|
|
u_long expiry = jiffies + timeout;
|
| 581 |
|
|
int success;
|
| 582 |
|
|
|
| 583 |
|
|
xdc_busy = 1;
|
| 584 |
|
|
while ((success = ((inb(port) & mask) != flags)) && (jiffies < expiry)) {
|
| 585 |
|
|
xd_timer.expires = jiffies;
|
| 586 |
|
|
cli();
|
| 587 |
|
|
add_timer(&xd_timer);
|
| 588 |
|
|
sleep_on(&xdc_wait);
|
| 589 |
|
|
del_timer(&xd_timer);
|
| 590 |
|
|
sti();
|
| 591 |
|
|
}
|
| 592 |
|
|
xdc_busy = 0;
|
| 593 |
|
|
return (success);
|
| 594 |
|
|
}
|
| 595 |
|
|
|
| 596 |
|
|
static inline u_int xd_wait_for_IRQ (void)
|
| 597 |
|
|
{
|
| 598 |
|
|
xd_watchdog_int.expires = jiffies + 8 * HZ;
|
| 599 |
|
|
add_timer(&xd_watchdog_int);
|
| 600 |
|
|
enable_dma(xd_dma);
|
| 601 |
|
|
sleep_on(&xd_wait_int);
|
| 602 |
|
|
del_timer(&xd_watchdog_int);
|
| 603 |
|
|
xdc_busy = 0;
|
| 604 |
|
|
disable_dma(xd_dma);
|
| 605 |
|
|
if (xd_error) {
|
| 606 |
|
|
printk("xd: missed IRQ - command aborted\n");
|
| 607 |
|
|
xd_error = 0;
|
| 608 |
|
|
return (1);
|
| 609 |
|
|
}
|
| 610 |
|
|
return (0);
|
| 611 |
|
|
}
|
| 612 |
|
|
|
| 613 |
|
|
/* xd_command: handle all data transfers necessary for a single command */
|
| 614 |
|
|
static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout)
|
| 615 |
|
|
{
|
| 616 |
|
|
u_char cmdblk[6],csb,complete = 0;
|
| 617 |
|
|
|
| 618 |
|
|
#ifdef DEBUG_COMMAND
|
| 619 |
|
|
printk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense);
|
| 620 |
|
|
#endif /* DEBUG_COMMAND */
|
| 621 |
|
|
|
| 622 |
|
|
outb(0,XD_SELECT);
|
| 623 |
|
|
outb(mode,XD_CONTROL);
|
| 624 |
|
|
|
| 625 |
|
|
if (xd_waitport(XD_STATUS,STAT_SELECT,STAT_SELECT,timeout))
|
| 626 |
|
|
return (1);
|
| 627 |
|
|
|
| 628 |
|
|
while (!complete) {
|
| 629 |
|
|
if (xd_waitport(XD_STATUS,STAT_READY,STAT_READY,timeout))
|
| 630 |
|
|
return (1);
|
| 631 |
|
|
switch (inb(XD_STATUS) & (STAT_COMMAND | STAT_INPUT)) {
|
| 632 |
|
|
case 0:
|
| 633 |
|
|
if (mode == DMA_MODE) {
|
| 634 |
|
|
if (xd_wait_for_IRQ())
|
| 635 |
|
|
return (1);
|
| 636 |
|
|
} else
|
| 637 |
|
|
outb(outdata ? *outdata++ : 0,XD_DATA);
|
| 638 |
|
|
break;
|
| 639 |
|
|
case STAT_INPUT:
|
| 640 |
|
|
if (mode == DMA_MODE) {
|
| 641 |
|
|
if (xd_wait_for_IRQ())
|
| 642 |
|
|
return (1);
|
| 643 |
|
|
} else
|
| 644 |
|
|
if (indata)
|
| 645 |
|
|
*indata++ = inb(XD_DATA);
|
| 646 |
|
|
else
|
| 647 |
|
|
inb(XD_DATA);
|
| 648 |
|
|
break;
|
| 649 |
|
|
case STAT_COMMAND:
|
| 650 |
|
|
outb(command ? *command++ : 0,XD_DATA);
|
| 651 |
|
|
break;
|
| 652 |
|
|
case STAT_COMMAND | STAT_INPUT:
|
| 653 |
|
|
complete = 1;
|
| 654 |
|
|
break;
|
| 655 |
|
|
}
|
| 656 |
|
|
}
|
| 657 |
|
|
csb = inb(XD_DATA);
|
| 658 |
|
|
|
| 659 |
|
|
if (xd_waitport(XD_STATUS,0,STAT_SELECT,timeout)) /* wait until deselected */
|
| 660 |
|
|
return (1);
|
| 661 |
|
|
|
| 662 |
|
|
if (csb & CSB_ERROR) { /* read sense data if error */
|
| 663 |
|
|
xd_build(cmdblk,CMD_SENSE,(csb & CSB_LUN) >> 5,0,0,0,0,0);
|
| 664 |
|
|
if (xd_command(cmdblk,0,sense,0,0,XD_TIMEOUT))
|
| 665 |
|
|
printk("xd_command: warning! sense command failed!\n");
|
| 666 |
|
|
}
|
| 667 |
|
|
|
| 668 |
|
|
#ifdef DEBUG_COMMAND
|
| 669 |
|
|
printk("xd_command: completed with csb = 0x%X\n",csb);
|
| 670 |
|
|
#endif /* DEBUG_COMMAND */
|
| 671 |
|
|
|
| 672 |
|
|
return (csb & CSB_ERROR);
|
| 673 |
|
|
}
|
| 674 |
|
|
|
| 675 |
|
|
static u_char xd_initdrives (void (*init_drive)(u_char drive))
|
| 676 |
|
|
{
|
| 677 |
|
|
u_char cmdblk[6],i,count = 0;
|
| 678 |
|
|
|
| 679 |
|
|
for (i = 0; i < XD_MAXDRIVES; i++) {
|
| 680 |
|
|
xd_build(cmdblk,CMD_TESTREADY,i,0,0,0,0,0);
|
| 681 |
|
|
if (!xd_command(cmdblk,PIO_MODE,0,0,0,XD_TIMEOUT * 8)) {
|
| 682 |
|
|
xd_timer.expires = jiffies + XD_INIT_DISK_DELAY;
|
| 683 |
|
|
add_timer(&xd_timer);
|
| 684 |
|
|
sleep_on(&xdc_wait);
|
| 685 |
|
|
|
| 686 |
|
|
init_drive(count);
|
| 687 |
|
|
count++;
|
| 688 |
|
|
|
| 689 |
|
|
xd_timer.expires = jiffies + XD_INIT_DISK_DELAY;
|
| 690 |
|
|
add_timer(&xd_timer);
|
| 691 |
|
|
sleep_on(&xdc_wait);
|
| 692 |
|
|
}
|
| 693 |
|
|
}
|
| 694 |
|
|
return (count);
|
| 695 |
|
|
}
|
| 696 |
|
|
|
| 697 |
|
|
static void xd_manual_geo_set (u_char drive)
|
| 698 |
|
|
{
|
| 699 |
|
|
xd_info[drive].heads = (u_char)(xd_geo[3 * drive + 1]);
|
| 700 |
|
|
xd_info[drive].cylinders = (u_short)(xd_geo[3 * drive]);
|
| 701 |
|
|
xd_info[drive].sectors = (u_char)(xd_geo[3 * drive + 2]);
|
| 702 |
|
|
}
|
| 703 |
|
|
|
| 704 |
|
|
static void xd_dtc_init_controller (u_char *address)
|
| 705 |
|
|
{
|
| 706 |
|
|
switch ((u_long) address) {
|
| 707 |
|
|
case 0x00000:
|
| 708 |
|
|
case 0xC8000: break; /*initial: 0x320 */
|
| 709 |
|
|
case 0xCA000: xd_iobase = 0x324;
|
| 710 |
|
|
break;
|
| 711 |
|
|
case 0xD0000: /*5150CX*/
|
| 712 |
|
|
case 0xD8000: break; /*5150CX & 5150XL*/
|
| 713 |
|
|
default: printk("xd_dtc_init_controller: unsupported BIOS address %p\n",address);
|
| 714 |
|
|
break;
|
| 715 |
|
|
}
|
| 716 |
|
|
xd_maxsectors = 0x01; /* my card seems to have trouble doing multi-block transfers? */
|
| 717 |
|
|
|
| 718 |
|
|
outb(0,XD_RESET); /* reset the controller */
|
| 719 |
|
|
}
|
| 720 |
|
|
|
| 721 |
|
|
|
| 722 |
|
|
static void xd_dtc5150cx_init_drive (u_char drive)
|
| 723 |
|
|
{
|
| 724 |
|
|
/* values from controller's BIOS - BIOS chip may be removed */
|
| 725 |
|
|
static u_short geometry_table[][4] = {
|
| 726 |
|
|
{0x200,8,0x200,0x100},
|
| 727 |
|
|
{0x267,2,0x267,0x267},
|
| 728 |
|
|
{0x264,4,0x264,0x80},
|
| 729 |
|
|
{0x132,4,0x132,0x0},
|
| 730 |
|
|
{0x132,2,0x80, 0x132},
|
| 731 |
|
|
{0x177,8,0x177,0x0},
|
| 732 |
|
|
{0x132,8,0x84, 0x0},
|
| 733 |
|
|
{}, /* not used */
|
| 734 |
|
|
{0x132,6,0x80, 0x100},
|
| 735 |
|
|
{0x200,6,0x100,0x100},
|
| 736 |
|
|
{0x264,2,0x264,0x80},
|
| 737 |
|
|
{0x280,4,0x280,0x100},
|
| 738 |
|
|
{0x2B9,3,0x2B9,0x2B9},
|
| 739 |
|
|
{0x2B9,5,0x2B9,0x2B9},
|
| 740 |
|
|
{0x280,6,0x280,0x100},
|
| 741 |
|
|
{0x132,4,0x132,0x0}};
|
| 742 |
|
|
u_char n;
|
| 743 |
|
|
|
| 744 |
|
|
n = inb(XD_JUMPER);
|
| 745 |
|
|
n = (drive ? n : (n >> 2)) & 0x33;
|
| 746 |
|
|
n = (n | (n >> 2)) & 0x0F;
|
| 747 |
|
|
if (xd_geo[3*drive])
|
| 748 |
|
|
xd_manual_geo_set(drive);
|
| 749 |
|
|
else
|
| 750 |
|
|
if (n != 7) {
|
| 751 |
|
|
xd_info[drive].heads = (u_char)(geometry_table[n][1]); /* heads */
|
| 752 |
|
|
xd_info[drive].cylinders = geometry_table[n][0]; /* cylinders */
|
| 753 |
|
|
xd_info[drive].sectors = 17; /* sectors */
|
| 754 |
|
|
#if 0
|
| 755 |
|
|
xd_info[drive].rwrite = geometry_table[n][2]; /* reduced write */
|
| 756 |
|
|
xd_info[drive].precomp = geometry_table[n][3] /* write precomp */
|
| 757 |
|
|
xd_info[drive].ecc = 0x0B; /* ecc length */
|
| 758 |
|
|
#endif /* 0 */
|
| 759 |
|
|
}
|
| 760 |
|
|
else {
|
| 761 |
|
|
printk("xd%c: undetermined drive geometry\n",'a'+drive);
|
| 762 |
|
|
return;
|
| 763 |
|
|
}
|
| 764 |
|
|
xd_info[drive].control = 5; /* control byte */
|
| 765 |
|
|
xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,geometry_table[n][2],geometry_table[n][3],0x0B);
|
| 766 |
|
|
xd_recalibrate(drive);
|
| 767 |
|
|
}
|
| 768 |
|
|
|
| 769 |
|
|
static void xd_dtc_init_drive (u_char drive)
|
| 770 |
|
|
{
|
| 771 |
|
|
u_char cmdblk[6],buf[64];
|
| 772 |
|
|
|
| 773 |
|
|
xd_build(cmdblk,CMD_DTCGETGEOM,drive,0,0,0,0,0);
|
| 774 |
|
|
if (!xd_command(cmdblk,PIO_MODE,buf,0,0,XD_TIMEOUT * 2)) {
|
| 775 |
|
|
xd_info[drive].heads = buf[0x0A]; /* heads */
|
| 776 |
|
|
xd_info[drive].cylinders = ((u_short *) (buf))[0x04]; /* cylinders */
|
| 777 |
|
|
xd_info[drive].sectors = 17; /* sectors */
|
| 778 |
|
|
if (xd_geo[3*drive])
|
| 779 |
|
|
xd_manual_geo_set(drive);
|
| 780 |
|
|
#if 0
|
| 781 |
|
|
xd_info[drive].rwrite = ((u_short *) (buf + 1))[0x05]; /* reduced write */
|
| 782 |
|
|
xd_info[drive].precomp = ((u_short *) (buf + 1))[0x06]; /* write precomp */
|
| 783 |
|
|
xd_info[drive].ecc = buf[0x0F]; /* ecc length */
|
| 784 |
|
|
#endif /* 0 */
|
| 785 |
|
|
xd_info[drive].control = 0; /* control byte */
|
| 786 |
|
|
|
| 787 |
|
|
xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,((u_short *) (buf + 1))[0x05],((u_short *) (buf + 1))[0x06],buf[0x0F]);
|
| 788 |
|
|
xd_build(cmdblk,CMD_DTCSETSTEP,drive,0,0,0,0,7);
|
| 789 |
|
|
if (xd_command(cmdblk,PIO_MODE,0,0,0,XD_TIMEOUT * 2))
|
| 790 |
|
|
printk("xd_dtc_init_drive: error setting step rate for drive %d\n",drive);
|
| 791 |
|
|
}
|
| 792 |
|
|
else
|
| 793 |
|
|
printk("xd_dtc_init_drive: error reading geometry for drive %d\n",drive);
|
| 794 |
|
|
}
|
| 795 |
|
|
|
| 796 |
|
|
static void xd_wd_init_controller (u_char *address)
|
| 797 |
|
|
{
|
| 798 |
|
|
switch ((u_long) address) {
|
| 799 |
|
|
case 0x00000:
|
| 800 |
|
|
case 0xC8000: break; /*initial: 0x320 */
|
| 801 |
|
|
case 0xCA000: xd_iobase = 0x324; break;
|
| 802 |
|
|
case 0xCC000: xd_iobase = 0x328; break;
|
| 803 |
|
|
case 0xCE000: xd_iobase = 0x32C; break;
|
| 804 |
|
|
case 0xD0000: xd_iobase = 0x328; break;
|
| 805 |
|
|
case 0xD8000: xd_iobase = 0x32C; break;
|
| 806 |
|
|
default: printk("xd_wd_init_controller: unsupported BIOS address %p\n",address);
|
| 807 |
|
|
break;
|
| 808 |
|
|
}
|
| 809 |
|
|
xd_maxsectors = 0x01; /* this one doesn't wrap properly either... */
|
| 810 |
|
|
|
| 811 |
|
|
outb(0,XD_RESET); /* reset the controller */
|
| 812 |
|
|
|
| 813 |
|
|
xd_timer.expires = jiffies + XD_INIT_DISK_DELAY;
|
| 814 |
|
|
add_timer(&xd_timer);
|
| 815 |
|
|
sleep_on(&xdc_wait);
|
| 816 |
|
|
}
|
| 817 |
|
|
|
| 818 |
|
|
static void xd_wd_init_drive (u_char drive)
|
| 819 |
|
|
{
|
| 820 |
|
|
/* values from controller's BIOS - BIOS may be disabled */
|
| 821 |
|
|
static u_short geometry_table[][4] = {
|
| 822 |
|
|
{0x264,4,0x1C2,0x1C2}, /* common part */
|
| 823 |
|
|
{0x132,4,0x099,0x0},
|
| 824 |
|
|
{0x267,2,0x1C2,0x1C2},
|
| 825 |
|
|
{0x267,4,0x1C2,0x1C2},
|
| 826 |
|
|
|
| 827 |
|
|
{0x334,6,0x335,0x335}, /* 1004 series RLL */
|
| 828 |
|
|
{0x30E,4,0x30F,0x3DC},
|
| 829 |
|
|
{0x30E,2,0x30F,0x30F},
|
| 830 |
|
|
{0x267,4,0x268,0x268},
|
| 831 |
|
|
|
| 832 |
|
|
{0x3D5,5,0x3D6,0x3D6}, /* 1002 series RLL */
|
| 833 |
|
|
{0x3DB,7,0x3DC,0x3DC},
|
| 834 |
|
|
{0x264,4,0x265,0x265},
|
| 835 |
|
|
{0x267,4,0x268,0x268}};
|
| 836 |
|
|
|
| 837 |
|
|
u_char cmdblk[6],buf[0x200];
|
| 838 |
|
|
u_char n = 0,rll,jumper_state,use_jumper_geo;
|
| 839 |
|
|
u_char wd_1002 = (xd_sigs[xd_type].string[7] == '6');
|
| 840 |
|
|
|
| 841 |
|
|
jumper_state = ~(inb(0x322));
|
| 842 |
|
|
if (jumper_state & 0x40)
|
| 843 |
|
|
xd_irq = 9;
|
| 844 |
|
|
rll = (jumper_state & 0x30) ? (0x04 << wd_1002) : 0;
|
| 845 |
|
|
|
| 846 |
|
|
xd_build(cmdblk,CMD_READ,drive,0,0,0,1,0);
|
| 847 |
|
|
if (!xd_command(cmdblk,PIO_MODE,buf,0,0,XD_TIMEOUT * 2)) {
|
| 848 |
|
|
xd_info[drive].heads = buf[0x1AF]; /* heads */
|
| 849 |
|
|
xd_info[drive].cylinders = ((u_short *) (buf + 1))[0xD6]; /* cylinders */
|
| 850 |
|
|
xd_info[drive].sectors = 17; /* sectors */
|
| 851 |
|
|
if (xd_geo[3*drive])
|
| 852 |
|
|
xd_manual_geo_set(drive);
|
| 853 |
|
|
#if 0
|
| 854 |
|
|
xd_info[drive].rwrite = ((u_short *) (buf))[0xD8]; /* reduced write */
|
| 855 |
|
|
xd_info[drive].wprecomp = ((u_short *) (buf))[0xDA]; /* write precomp */
|
| 856 |
|
|
xd_info[drive].ecc = buf[0x1B4]; /* ecc length */
|
| 857 |
|
|
#endif /* 0 */
|
| 858 |
|
|
xd_info[drive].control = buf[0x1B5]; /* control byte */
|
| 859 |
|
|
|
| 860 |
|
|
use_jumper_geo = !(xd_info[drive].heads) || !(xd_info[drive].cylinders);
|
| 861 |
|
|
if (xd_geo[3*drive]) {
|
| 862 |
|
|
xd_manual_geo_set(drive);
|
| 863 |
|
|
xd_info[drive].control = rll ? 7 : 5;
|
| 864 |
|
|
}
|
| 865 |
|
|
else if (use_jumper_geo) {
|
| 866 |
|
|
n = (((jumper_state & 0x0F) >> (drive << 1)) & 0x03) | rll;
|
| 867 |
|
|
xd_info[drive].cylinders = geometry_table[n][0];
|
| 868 |
|
|
xd_info[drive].heads = (u_char)(geometry_table[n][1]);
|
| 869 |
|
|
xd_info[drive].control = rll ? 7 : 5;
|
| 870 |
|
|
#if 0
|
| 871 |
|
|
xd_info[drive].rwrite = geometry_table[n][2];
|
| 872 |
|
|
xd_info[drive].wprecomp = geometry_table[n][3];
|
| 873 |
|
|
xd_info[drive].ecc = 0x0B;
|
| 874 |
|
|
#endif /* 0 */
|
| 875 |
|
|
}
|
| 876 |
|
|
if (!wd_1002)
|
| 877 |
|
|
if (use_jumper_geo)
|
| 878 |
|
|
xd_setparam(CMD_WDSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,
|
| 879 |
|
|
geometry_table[n][2],geometry_table[n][3],0x0B);
|
| 880 |
|
|
else
|
| 881 |
|
|
xd_setparam(CMD_WDSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,
|
| 882 |
|
|
((u_short *) (buf))[0xD8],((u_short *) (buf))[0xDA],buf[0x1B4]);
|
| 883 |
|
|
/* 1002 based RLL controler requests converted adressing, but reports physical
|
| 884 |
|
|
(physical 26 sec., logical 17 sec.)
|
| 885 |
|
|
1004 based ???? */
|
| 886 |
|
|
if (rll & wd_1002) {
|
| 887 |
|
|
if ((xd_info[drive].cylinders *= 26,
|
| 888 |
|
|
xd_info[drive].cylinders /= 17) > 1023)
|
| 889 |
|
|
xd_info[drive].cylinders = 1023; /* 1024 ? */
|
| 890 |
|
|
#if 0
|
| 891 |
|
|
xd_info[drive].rwrite *= 26;
|
| 892 |
|
|
xd_info[drive].rwrite /= 17;
|
| 893 |
|
|
xd_info[drive].wprecomp *= 26
|
| 894 |
|
|
xd_info[drive].wprecomp /= 17;
|
| 895 |
|
|
#endif /* 0 */
|
| 896 |
|
|
}
|
| 897 |
|
|
}
|
| 898 |
|
|
else
|
| 899 |
|
|
printk("xd_wd_init_drive: error reading geometry for drive %d\n",drive);
|
| 900 |
|
|
}
|
| 901 |
|
|
|
| 902 |
|
|
static void xd_seagate_init_controller (u_char *address)
|
| 903 |
|
|
{
|
| 904 |
|
|
switch ((u_long) address) {
|
| 905 |
|
|
case 0x00000:
|
| 906 |
|
|
case 0xC8000: break; /*initial: 0x320 */
|
| 907 |
|
|
case 0xD0000: xd_iobase = 0x324; break;
|
| 908 |
|
|
case 0xD8000: xd_iobase = 0x328; break;
|
| 909 |
|
|
case 0xE0000: xd_iobase = 0x32C; break;
|
| 910 |
|
|
default: printk("xd_seagate_init_controller: unsupported BIOS address %p\n",address);
|
| 911 |
|
|
break;
|
| 912 |
|
|
}
|
| 913 |
|
|
xd_maxsectors = 0x40;
|
| 914 |
|
|
|
| 915 |
|
|
outb(0,XD_RESET); /* reset the controller */
|
| 916 |
|
|
}
|
| 917 |
|
|
|
| 918 |
|
|
static void xd_seagate_init_drive (u_char drive)
|
| 919 |
|
|
{
|
| 920 |
|
|
u_char cmdblk[6],buf[0x200];
|
| 921 |
|
|
|
| 922 |
|
|
xd_build(cmdblk,CMD_ST11GETGEOM,drive,0,0,0,1,0);
|
| 923 |
|
|
if (!xd_command(cmdblk,PIO_MODE,buf,0,0,XD_TIMEOUT * 2)) {
|
| 924 |
|
|
xd_info[drive].heads = buf[0x04]; /* heads */
|
| 925 |
|
|
xd_info[drive].cylinders = (buf[0x02] << 8) | buf[0x03]; /* cylinders */
|
| 926 |
|
|
xd_info[drive].sectors = buf[0x05]; /* sectors */
|
| 927 |
|
|
xd_info[drive].control = 0; /* control byte */
|
| 928 |
|
|
}
|
| 929 |
|
|
else
|
| 930 |
|
|
printk("xd_seagate_init_drive: error reading geometry from drive %d\n",drive);
|
| 931 |
|
|
}
|
| 932 |
|
|
|
| 933 |
|
|
/* Omti support courtesy Dirk Melchers */
|
| 934 |
|
|
static void xd_omti_init_controller (u_char *address)
|
| 935 |
|
|
{
|
| 936 |
|
|
switch ((u_long) address) {
|
| 937 |
|
|
case 0x00000:
|
| 938 |
|
|
case 0xC8000: break; /*initial: 0x320 */
|
| 939 |
|
|
case 0xD0000: xd_iobase = 0x324; break;
|
| 940 |
|
|
case 0xD8000: xd_iobase = 0x328; break;
|
| 941 |
|
|
case 0xE0000: xd_iobase = 0x32C; break;
|
| 942 |
|
|
default: printk("xd_omti_init_controller: unsupported BIOS address %p\n",address);
|
| 943 |
|
|
break;
|
| 944 |
|
|
}
|
| 945 |
|
|
|
| 946 |
|
|
xd_maxsectors = 0x40;
|
| 947 |
|
|
|
| 948 |
|
|
outb(0,XD_RESET); /* reset the controller */
|
| 949 |
|
|
}
|
| 950 |
|
|
|
| 951 |
|
|
static void xd_omti_init_drive (u_char drive)
|
| 952 |
|
|
{
|
| 953 |
|
|
/* gets infos from drive */
|
| 954 |
|
|
xd_override_init_drive(drive);
|
| 955 |
|
|
|
| 956 |
|
|
/* set other parameters, Hardcoded, not that nice :-) */
|
| 957 |
|
|
xd_info[drive].control = 2;
|
| 958 |
|
|
}
|
| 959 |
|
|
|
| 960 |
|
|
/* Xebec support (AK) */
|
| 961 |
|
|
static void xd_xebec_init_controller (u_char *address)
|
| 962 |
|
|
{
|
| 963 |
|
|
/* iobase may be set manually in range 0x300 - 0x33C
|
| 964 |
|
|
irq may be set manually to 2(9),3,4,5,6,7
|
| 965 |
|
|
dma may be set manually to 1,2,3
|
| 966 |
|
|
(How to detect them ???)
|
| 967 |
|
|
BIOS address may be set manually in range 0x0 - 0xF8000
|
| 968 |
|
|
If you need non-standard settings use the xd=... command */
|
| 969 |
|
|
|
| 970 |
|
|
switch ((u_long) address) {
|
| 971 |
|
|
case 0x00000:
|
| 972 |
|
|
case 0xC8000: /* initially: xd_iobase==0x320 */
|
| 973 |
|
|
case 0xD0000:
|
| 974 |
|
|
case 0xD2000:
|
| 975 |
|
|
case 0xD4000:
|
| 976 |
|
|
case 0xD6000:
|
| 977 |
|
|
case 0xD8000:
|
| 978 |
|
|
case 0xDA000:
|
| 979 |
|
|
case 0xDC000:
|
| 980 |
|
|
case 0xDE000:
|
| 981 |
|
|
case 0xE0000: break;
|
| 982 |
|
|
default: printk("xd_xebec_init_controller: unsupported BIOS address %p\n",address);
|
| 983 |
|
|
break;
|
| 984 |
|
|
}
|
| 985 |
|
|
|
| 986 |
|
|
xd_maxsectors = 0x01;
|
| 987 |
|
|
outb(0,XD_RESET); /* reset the controller */
|
| 988 |
|
|
|
| 989 |
|
|
xd_timer.expires = jiffies + XD_INIT_DISK_DELAY;
|
| 990 |
|
|
add_timer(&xd_timer);
|
| 991 |
|
|
sleep_on(&xdc_wait);
|
| 992 |
|
|
}
|
| 993 |
|
|
|
| 994 |
|
|
static void xd_xebec_init_drive (u_char drive)
|
| 995 |
|
|
{
|
| 996 |
|
|
/* values from controller's BIOS - BIOS chip may be removed */
|
| 997 |
|
|
static u_short geometry_table[][5] = {
|
| 998 |
|
|
{0x132,4,0x080,0x080,0x7},
|
| 999 |
|
|
{0x132,4,0x080,0x080,0x17},
|
| 1000 |
|
|
{0x264,2,0x100,0x100,0x7},
|
| 1001 |
|
|
{0x264,2,0x100,0x100,0x17},
|
| 1002 |
|
|
{0x132,8,0x080,0x080,0x7},
|
| 1003 |
|
|
{0x132,8,0x080,0x080,0x17},
|
| 1004 |
|
|
{0x264,4,0x100,0x100,0x6},
|
| 1005 |
|
|
{0x264,4,0x100,0x100,0x17},
|
| 1006 |
|
|
{0x2BC,5,0x2BC,0x12C,0x6},
|
| 1007 |
|
|
{0x3A5,4,0x3A5,0x3A5,0x7},
|
| 1008 |
|
|
{0x26C,6,0x26C,0x26C,0x7},
|
| 1009 |
|
|
{0x200,8,0x200,0x100,0x17},
|
| 1010 |
|
|
{0x400,5,0x400,0x400,0x7},
|
| 1011 |
|
|
{0x400,6,0x400,0x400,0x7},
|
| 1012 |
|
|
{0x264,8,0x264,0x200,0x17},
|
| 1013 |
|
|
{0x33E,7,0x33E,0x200,0x7}};
|
| 1014 |
|
|
u_char n;
|
| 1015 |
|
|
|
| 1016 |
|
|
n = inb(XD_JUMPER) & 0x0F; /* BIOS's drive number: same geometry
|
| 1017 |
|
|
is assumed for BOTH drives */
|
| 1018 |
|
|
if (xd_geo[3*drive])
|
| 1019 |
|
|
xd_manual_geo_set(drive);
|
| 1020 |
|
|
else {
|
| 1021 |
|
|
xd_info[drive].heads = (u_char)(geometry_table[n][1]); /* heads */
|
| 1022 |
|
|
xd_info[drive].cylinders = geometry_table[n][0]; /* cylinders */
|
| 1023 |
|
|
xd_info[drive].sectors = 17; /* sectors */
|
| 1024 |
|
|
#if 0
|
| 1025 |
|
|
xd_info[drive].rwrite = geometry_table[n][2]; /* reduced write */
|
| 1026 |
|
|
xd_info[drive].precomp = geometry_table[n][3] /* write precomp */
|
| 1027 |
|
|
xd_info[drive].ecc = 0x0B; /* ecc length */
|
| 1028 |
|
|
#endif /* 0 */
|
| 1029 |
|
|
}
|
| 1030 |
|
|
xd_info[drive].control = geometry_table[n][4]; /* control byte */
|
| 1031 |
|
|
xd_setparam(CMD_XBSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,geometry_table[n][2],geometry_table[n][3],0x0B);
|
| 1032 |
|
|
xd_recalibrate(drive);
|
| 1033 |
|
|
}
|
| 1034 |
|
|
|
| 1035 |
|
|
/* xd_override_init_drive: this finds disk geometry in a "binary search" style, narrowing in on the "correct" number of heads
|
| 1036 |
|
|
etc. by trying values until it gets the highest successful value. Idea courtesy Salvador Abreu (spa@fct.unl.pt). */
|
| 1037 |
|
|
static void xd_override_init_drive (u_char drive)
|
| 1038 |
|
|
{
|
| 1039 |
|
|
u_short min[] = { 0,0,0 },max[] = { 16,1024,64 },test[] = { 0,0,0 };
|
| 1040 |
|
|
u_char cmdblk[6],i;
|
| 1041 |
|
|
|
| 1042 |
|
|
if (xd_geo[3*drive])
|
| 1043 |
|
|
xd_manual_geo_set(drive);
|
| 1044 |
|
|
else {
|
| 1045 |
|
|
for (i = 0; i < 3; i++) {
|
| 1046 |
|
|
while (min[i] != max[i] - 1) {
|
| 1047 |
|
|
test[i] = (min[i] + max[i]) / 2;
|
| 1048 |
|
|
xd_build(cmdblk,CMD_SEEK,drive,(u_char) test[0],(u_short) test[1],(u_char) test[2],0,0);
|
| 1049 |
|
|
if (!xd_command(cmdblk,PIO_MODE,0,0,0,XD_TIMEOUT * 2))
|
| 1050 |
|
|
min[i] = test[i];
|
| 1051 |
|
|
else
|
| 1052 |
|
|
max[i] = test[i];
|
| 1053 |
|
|
}
|
| 1054 |
|
|
test[i] = min[i];
|
| 1055 |
|
|
}
|
| 1056 |
|
|
xd_info[drive].heads = (u_char) min[0] + 1;
|
| 1057 |
|
|
xd_info[drive].cylinders = (u_short) min[1] + 1;
|
| 1058 |
|
|
xd_info[drive].sectors = (u_char) min[2] + 1;
|
| 1059 |
|
|
}
|
| 1060 |
|
|
xd_info[drive].control = 0;
|
| 1061 |
|
|
}
|
| 1062 |
|
|
|
| 1063 |
|
|
/* xd_setup: initialise controler from command line parameters */
|
| 1064 |
|
|
void xd_setup (char *command,int *integers)
|
| 1065 |
|
|
{
|
| 1066 |
|
|
switch (integers[0]) {
|
| 1067 |
|
|
case 4: if (integers[4] < 0)
|
| 1068 |
|
|
nodma = 1;
|
| 1069 |
|
|
else if (integers[4] < 8)
|
| 1070 |
|
|
xd_dma = integers[4];
|
| 1071 |
|
|
case 3: if ((integers[3] > 0) && (integers[3] <= 0x3FC))
|
| 1072 |
|
|
xd_iobase = integers[3];
|
| 1073 |
|
|
case 2: if ((integers[2] > 0) && (integers[2] < 16))
|
| 1074 |
|
|
xd_irq = integers[2];
|
| 1075 |
|
|
case 1: xd_override = 1;
|
| 1076 |
|
|
if ((integers[1] >= 0) && (integers[1] < (sizeof(xd_sigs) / sizeof(xd_sigs[0]))))
|
| 1077 |
|
|
xd_type = integers[1];
|
| 1078 |
|
|
case 0: break;
|
| 1079 |
|
|
default:printk("xd: too many parameters for xd\n");
|
| 1080 |
|
|
}
|
| 1081 |
|
|
xd_maxsectors = 0x01;
|
| 1082 |
|
|
}
|
| 1083 |
|
|
|
| 1084 |
|
|
#ifndef MODULE
|
| 1085 |
|
|
/* xd_manual_geo_init: initialise drive geometry from command line parameters
|
| 1086 |
|
|
(used only for WD drives) */
|
| 1087 |
|
|
void xd_manual_geo_init (char *command,int *integers)
|
| 1088 |
|
|
{
|
| 1089 |
|
|
int i;
|
| 1090 |
|
|
if (integers[0]%3 != 0) {
|
| 1091 |
|
|
printk("xd: incorrect number of parameters for xd_geo\n");
|
| 1092 |
|
|
return;
|
| 1093 |
|
|
}
|
| 1094 |
|
|
for (i = 0; (i < integers[0]) && (i < 3*XD_MAXDRIVES); i++)
|
| 1095 |
|
|
xd_geo[i] = integers[i+1];
|
| 1096 |
|
|
}
|
| 1097 |
|
|
#endif /* MODULE */
|
| 1098 |
|
|
|
| 1099 |
|
|
/* xd_setparam: set the drive characteristics */
|
| 1100 |
|
|
static void xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc)
|
| 1101 |
|
|
{
|
| 1102 |
|
|
u_char cmdblk[14];
|
| 1103 |
|
|
|
| 1104 |
|
|
xd_build(cmdblk,command,drive,0,0,0,0,0);
|
| 1105 |
|
|
cmdblk[6] = (u_char) (cylinders >> 8) & 0x03;
|
| 1106 |
|
|
cmdblk[7] = (u_char) (cylinders & 0xFF);
|
| 1107 |
|
|
cmdblk[8] = heads & 0x1F;
|
| 1108 |
|
|
cmdblk[9] = (u_char) (rwrite >> 8) & 0x03;
|
| 1109 |
|
|
cmdblk[10] = (u_char) (rwrite & 0xFF);
|
| 1110 |
|
|
cmdblk[11] = (u_char) (wprecomp >> 8) & 0x03;
|
| 1111 |
|
|
cmdblk[12] = (u_char) (wprecomp & 0xFF);
|
| 1112 |
|
|
cmdblk[13] = ecc;
|
| 1113 |
|
|
|
| 1114 |
|
|
/* Some controllers require geometry info as data, not command */
|
| 1115 |
|
|
|
| 1116 |
|
|
if (xd_command(cmdblk,PIO_MODE,0,&cmdblk[6],0,XD_TIMEOUT * 2))
|
| 1117 |
|
|
printk("xd_setparam: error setting characteristics for drive %d\n",drive);
|
| 1118 |
|
|
}
|
| 1119 |
|
|
|
| 1120 |
|
|
|
| 1121 |
|
|
#ifdef MODULE
|
| 1122 |
|
|
static int xd[5] = { -1,-1,-1,-1, };
|
| 1123 |
|
|
|
| 1124 |
|
|
static void xd_done (void)
|
| 1125 |
|
|
{
|
| 1126 |
|
|
struct gendisk ** gdp;
|
| 1127 |
|
|
|
| 1128 |
|
|
blksize_size[MAJOR_NR] = NULL;
|
| 1129 |
|
|
blk_dev[MAJOR_NR].request_fn = NULL;
|
| 1130 |
|
|
blk_size[MAJOR_NR] = NULL;
|
| 1131 |
|
|
hardsect_size[MAJOR_NR] = NULL;
|
| 1132 |
|
|
read_ahead[MAJOR_NR] = 0;
|
| 1133 |
|
|
for (gdp = &gendisk_head; *gdp; gdp = &((*gdp)->next))
|
| 1134 |
|
|
if (*gdp == &xd_gendisk)
|
| 1135 |
|
|
break;
|
| 1136 |
|
|
if (*gdp)
|
| 1137 |
|
|
*gdp = (*gdp)->next;
|
| 1138 |
|
|
release_region(xd_iobase,4);
|
| 1139 |
|
|
}
|
| 1140 |
|
|
|
| 1141 |
|
|
int init_module(void)
|
| 1142 |
|
|
{
|
| 1143 |
|
|
int i,count = 0;
|
| 1144 |
|
|
int error = xd_init();
|
| 1145 |
|
|
|
| 1146 |
|
|
if (!error)
|
| 1147 |
|
|
{
|
| 1148 |
|
|
printk(KERN_INFO "XD: Loaded as a module.\n");
|
| 1149 |
|
|
for (i = 4; i > 0; i--)
|
| 1150 |
|
|
if(((xd[i] = xd[i-1]) >= 0) && !count)
|
| 1151 |
|
|
count = i;
|
| 1152 |
|
|
if((xd[0] = count));
|
| 1153 |
|
|
xd_setup(NULL, xd);
|
| 1154 |
|
|
xd_geninit(&(struct gendisk) { 0,0,0,0,0,0,0,0,0,0,0 });
|
| 1155 |
|
|
if (!xd_drives) {
|
| 1156 |
|
|
/* no drives detected - unload module */
|
| 1157 |
|
|
unregister_blkdev(MAJOR_NR, "xd");
|
| 1158 |
|
|
xd_done();
|
| 1159 |
|
|
return (-1);
|
| 1160 |
|
|
}
|
| 1161 |
|
|
for (i = 0; i < xd_drives; i++)
|
| 1162 |
|
|
resetup_one_dev(&xd_gendisk, i);
|
| 1163 |
|
|
}
|
| 1164 |
|
|
|
| 1165 |
|
|
return error;
|
| 1166 |
|
|
}
|
| 1167 |
|
|
|
| 1168 |
|
|
void cleanup_module(void)
|
| 1169 |
|
|
{
|
| 1170 |
|
|
int partition,dev,start;
|
| 1171 |
|
|
|
| 1172 |
|
|
unregister_blkdev(MAJOR_NR, "xd");
|
| 1173 |
|
|
for (dev = 0; dev < xd_drives; dev++) {
|
| 1174 |
|
|
start = dev << xd_gendisk.minor_shift;
|
| 1175 |
|
|
for (partition = xd_gendisk.max_p - 1; partition >= 0; partition--) {
|
| 1176 |
|
|
int minor = (start | partition);
|
| 1177 |
|
|
kdev_t devp = MKDEV(MAJOR_NR, minor);
|
| 1178 |
|
|
start = dev << xd_gendisk.minor_shift;
|
| 1179 |
|
|
sync_dev(devp);
|
| 1180 |
|
|
invalidate_buffers(devp);
|
| 1181 |
|
|
}
|
| 1182 |
|
|
}
|
| 1183 |
|
|
xd_done();
|
| 1184 |
|
|
if (xd_drives) {
|
| 1185 |
|
|
free_irq(xd_irq, NULL);
|
| 1186 |
|
|
free_dma(xd_dma);
|
| 1187 |
|
|
if (xd_dma_buffer)
|
| 1188 |
|
|
xd_dma_mem_free((unsigned long)xd_dma_buffer, xd_maxsectors * 0x200);
|
| 1189 |
|
|
}
|
| 1190 |
|
|
}
|
| 1191 |
|
|
#endif /* MODULE */
|
