URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [char/] [keyboard.c] - Blame information for rev 1765

Details | Compare with Previous | View Log

/*
 * linux/drivers/char/keyboard.c
 *
 * Keyboard driver for Linux v0.99 using Latin-1.
 *
 * Written for linux by Johan Myreen as a translation from
 * the assembly version by Linus (with diacriticals added)
 *
 * Some additional features added by Christoph Niemann (ChN), March 1993
 *
 * Loadable keymaps by Risto Kankkunen, May 1993
 *
 * Diacriticals redone & other small changes, aeb@cwi.nl, June 1993
 * Added decr/incr_console, dynamic keymaps, Unicode support,
 * dynamic function/string keys, led setting,  Sept 1994
 * `Sticky' modifier keys, 951006.
 *
 */
 
#define KEYBOARD_IRQ IRQ_PS2_0
#define DISABLE_KBD_DURING_INTERRUPTS 0
 
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/random.h>
 
#include <asm/bitops.h>
#ifdef CONFIG_OR32
#include <asm/irq.h>
#endif
 
#include "kbd_kern.h"
#include "diacr.h"
#include "vt_kern.h"
 
/*
 * On non-x86 hardware we do a full keyboard controller
 * initialization, in case the bootup software hasn't done
 * it. On a x86, the BIOS will already have initialized the
 * keyboard.
 */
#ifndef __i386__
#define INIT_KBD
static int initialize_kbd(void);
#endif
 
#define SIZE(x) (sizeof(x)/sizeof((x)[0]))
 
#define KBD_REPORT_ERR
#define KBD_REPORT_UNKN
/* #define KBD_IS_FOCUS_9000 */
 
#ifndef KBD_DEFMODE
#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
#endif
 
#ifndef KBD_DEFLEDS
/*
 * Some laptops take the 789uiojklm,. keys as number pad when NumLock
 * is on. This seems a good reason to start with NumLock off.
 */
#define KBD_DEFLEDS 0
#endif
 
#ifndef KBD_DEFLOCK
#define KBD_DEFLOCK 0
#endif
 
#include <asm/io.h>
#include <asm/system.h>
 
extern void poke_blanked_console(void);
extern void ctrl_alt_del(void);
extern void reset_vc(unsigned int new_console);
extern void scrollback(int);
extern void scrollfront(int);
 
unsigned char kbd_read_mask = 0x01;     /* modified by psaux.c */
 
/*
 * global state includes the following, and various static variables
 * in this module: prev_scancode, shift_state, diacr, npadch, dead_key_next.
 * (last_console is now a global variable)
 */
 
/* shift state counters.. */
static unsigned char k_down[NR_SHIFT] = {0, };
/* keyboard key bitmap */
#define BITS_PER_LONG (8*sizeof(unsigned long))
static unsigned long key_down[256/BITS_PER_LONG] = { 0, };
 
static int dead_key_next = 0;
/*
 * In order to retrieve the shift_state (for the mouse server), either
 * the variable must be global, or a new procedure must be created to
 * return the value. I chose the former way.
 */
/*static*/ int shift_state = 0;
static int npadch = -1;                 /* -1 or number assembled on pad */
static unsigned char diacr = 0;
static char rep = 0;                     /* flag telling character repeat */
struct kbd_struct kbd_table[MAX_NR_CONSOLES];
static struct tty_struct **ttytab;
static struct kbd_struct * kbd = kbd_table;
static struct tty_struct * tty = NULL;
 
/* used only by send_data - set by keyboard_interrupt */
static volatile unsigned char reply_expected = 0;
static volatile unsigned char acknowledge = 0;
static volatile unsigned char resend = 0;
 
extern void compute_shiftstate(void);
 
typedef void (*k_hand)(unsigned char value, char up_flag);
typedef void (k_handfn)(unsigned char value, char up_flag);
 
static k_handfn
        do_self, do_fn, do_spec, do_pad, do_dead, do_cons, do_cur, do_shift,
        do_meta, do_ascii, do_lock, do_lowercase, do_slock, do_ignore;
 
static k_hand key_handler[16] = {
        do_self, do_fn, do_spec, do_pad, do_dead, do_cons, do_cur, do_shift,
        do_meta, do_ascii, do_lock, do_lowercase, do_slock,
        do_ignore, do_ignore, do_ignore
};
 
typedef void (*void_fnp)(void);
typedef void (void_fn)(void);
 
static void_fn do_null, enter, show_ptregs, send_intr, lastcons, caps_toggle,
        num, hold, scroll_forw, scroll_back, boot_it, caps_on, compose,
        SAK, decr_console, incr_console, spawn_console, bare_num;
 
static void_fnp spec_fn_table[] = {
        do_null,        enter,          show_ptregs,    show_mem,
        show_state,     send_intr,      lastcons,       caps_toggle,
        num,            hold,           scroll_forw,    scroll_back,
        boot_it,        caps_on,        compose,        SAK,
        decr_console,   incr_console,   spawn_console,  bare_num
};
 
/* maximum values each key_handler can handle */
const int max_vals[] = {
        255, SIZE(func_table) - 1, SIZE(spec_fn_table) - 1, NR_PAD - 1,
        NR_DEAD - 1, 255, 3, NR_SHIFT - 1,
        255, NR_ASCII - 1, NR_LOCK - 1, 255,
        NR_LOCK - 1
};
 
const int NR_TYPES = SIZE(max_vals);
 
static void put_queue(int);
static unsigned char handle_diacr(unsigned char);
 
/* pt_regs - set by keyboard_interrupt(), used by show_ptregs() */
static struct pt_regs * pt_regs;
 
static inline void kb_wait(void)
{
        int i;
 
        for (i=0; i<0x100000; i++)
                if ((inb_p(KBD_BASE_ADD+0x4) & 0x02) == 0)
                        return;
        printk(KERN_WARNING "Keyboard timed out\n");
}
 
static inline void send_cmd(unsigned char c)
{
        kb_wait();
        outb(c,KBD_BASE_ADD+0x4);
}
 
/*
 * Many other routines do put_queue, but I think either
 * they produce ASCII, or they produce some user-assigned
 * string, and in both cases we might assume that it is
 * in utf-8 already.
 */
void to_utf8(ushort c) {
    if (c < 0x80)
        put_queue(c);                   /*  0*******  */
    else if (c < 0x800) {
        put_queue(0xc0 | (c >> 6));     /*  110***** 10******  */
        put_queue(0x80 | (c & 0x3f));
    } else {
        put_queue(0xe0 | (c >> 12));    /*  1110**** 10****** 10******  */
        put_queue(0x80 | ((c >> 6) & 0x3f));
        put_queue(0x80 | (c & 0x3f));
    }
    /* UTF-8 is defined for words of up to 31 bits,
       but we need only 16 bits here */
}
 
/*
 * Translation of escaped scancodes to keycodes.
 * This is now user-settable.
 * The keycodes 1-88,96-111,119 are fairly standard, and
 * should probably not be changed - changing might confuse X.
 * X also interprets scancode 0x5d (KEY_Begin).
 *
 * For 1-88 keycode equals scancode.
 */
 
#define E0_KPENTER 96
#define E0_RCTRL   97
#define E0_KPSLASH 98
#define E0_PRSCR   99
#define E0_RALT    100
#define E0_BREAK   101  /* (control-pause) */
#define E0_HOME    102
#define E0_UP      103
#define E0_PGUP    104
#define E0_LEFT    105
#define E0_RIGHT   106
#define E0_END     107
#define E0_DOWN    108
#define E0_PGDN    109
#define E0_INS     110
#define E0_DEL     111
 
#define E1_PAUSE   119
 
/*
 * The keycodes below are randomly located in 89-95,112-118,120-127.
 * They could be thrown away (and all occurrences below replaced by 0),
 * but that would force many users to use the `setkeycodes' utility, where
 * they needed not before. It does not matter that there are duplicates, as
 * long as no duplication occurs for any single keyboard.
 */
#define SC_LIM 89
 
#define FOCUS_PF1 85           /* actual code! */
#define FOCUS_PF2 89
#define FOCUS_PF3 90
#define FOCUS_PF4 91
#define FOCUS_PF5 92
#define FOCUS_PF6 93
#define FOCUS_PF7 94
#define FOCUS_PF8 95
#define FOCUS_PF9 120
#define FOCUS_PF10 121
#define FOCUS_PF11 122
#define FOCUS_PF12 123
 
#define JAP_86     124
/* tfj@olivia.ping.dk:
 * The four keys are located over the numeric keypad, and are
 * labelled A1-A4. It's an rc930 keyboard, from
 * Regnecentralen/RC International, Now ICL.
 * Scancodes: 59, 5a, 5b, 5c.
 */
#define RGN1 124
#define RGN2 125
#define RGN3 126
#define RGN4 127
 
static unsigned char high_keys[128 - SC_LIM] = {
  RGN1, RGN2, RGN3, RGN4, 0, 0, 0,                   /* 0x59-0x5f */
  0, 0, 0, 0, 0, 0, 0, 0,                            /* 0x60-0x67 */
  0, 0, 0, 0, 0, FOCUS_PF11, 0, FOCUS_PF12,          /* 0x68-0x6f */
  0, 0, 0, FOCUS_PF2, FOCUS_PF9, 0, 0, FOCUS_PF3,    /* 0x70-0x77 */
  FOCUS_PF4, FOCUS_PF5, FOCUS_PF6, FOCUS_PF7,        /* 0x78-0x7b */
  FOCUS_PF8, JAP_86, FOCUS_PF10, 0                   /* 0x7c-0x7f */
};
 
/* BTC */
#define E0_MACRO   112
/* LK450 */
#define E0_F13     113
#define E0_F14     114
#define E0_HELP    115
#define E0_DO      116
#define E0_F17     117
#define E0_KPMINPLUS 118
/*
 * My OmniKey generates e0 4c for  the "OMNI" key and the
 * right alt key does nada. [kkoller@nyx10.cs.du.edu]
 */
#define E0_OK   124
/*
 * New microsoft keyboard is rumoured to have
 * e0 5b (left window button), e0 5c (right window button),
 * e0 5d (menu button). [or: LBANNER, RBANNER, RMENU]
 * [or: Windows_L, Windows_R, TaskMan]
 */
#define E0_MSLW 125
#define E0_MSRW 126
#define E0_MSTM 127
 
static unsigned char e0_keys[128] = {
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x00-0x07 */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x08-0x0f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x10-0x17 */
  0, 0, 0, 0, E0_KPENTER, E0_RCTRL, 0, 0,           /* 0x18-0x1f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x20-0x27 */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x28-0x2f */
  0, 0, 0, 0, 0, E0_KPSLASH, 0, E0_PRSCR,           /* 0x30-0x37 */
  E0_RALT, 0, 0, 0, 0, E0_F13, E0_F14, E0_HELP,           /* 0x38-0x3f */
  E0_DO, E0_F17, 0, 0, 0, 0, E0_BREAK, E0_HOME,           /* 0x40-0x47 */
  E0_UP, E0_PGUP, 0, E0_LEFT, E0_OK, E0_RIGHT, E0_KPMINPLUS, E0_END,/* 0x48-0x4f */
  E0_DOWN, E0_PGDN, E0_INS, E0_DEL, 0, 0, 0, 0,           /* 0x50-0x57 */
  0, 0, 0, E0_MSLW, E0_MSRW, E0_MSTM, 0, 0,        /* 0x58-0x5f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x60-0x67 */
  0, 0, 0, 0, 0, 0, 0, E0_MACRO,                     /* 0x68-0x6f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x70-0x77 */
  0, 0, 0, 0, 0, 0, 0, 0                              /* 0x78-0x7f */
};
 
int setkeycode(unsigned int scancode, unsigned int keycode)
{
        if (scancode < SC_LIM || scancode > 255 || keycode > 127)
          return -EINVAL;
        if (scancode < 128)
          high_keys[scancode - SC_LIM] = keycode;
        else
          e0_keys[scancode - 128] = keycode;
        return 0;
}
 
int getkeycode(unsigned int scancode)
{
        return
          (scancode < SC_LIM || scancode > 255) ? -EINVAL :
          (scancode < 128) ? high_keys[scancode - SC_LIM] :
            e0_keys[scancode - 128];
}
 
#if DISABLE_KBD_DURING_INTERRUPTS
#define disable_keyboard()      do { send_cmd(0xAD); kb_wait(); } while (0)
#define enable_keyboard()       send_cmd(0xAE)
#else
#define disable_keyboard()      /* nothing */
#define enable_keyboard()       /* nothing */
#endif
 
static void handle_scancode(unsigned char scancode)
{
        unsigned char keycode;
        static unsigned int prev_scancode = 0;   /* remember E0, E1 */
        char up_flag;                            /* 0 or 0200 */
        char raw_mode;
 
        if (reply_expected) {
          /* 0xfa, 0xfe only mean "acknowledge", "resend" for most keyboards */
          /* but they are the key-up scancodes for PF6, PF10 on a FOCUS 9000 */
                reply_expected = 0;
                if (scancode == 0xfa) {
                        acknowledge = 1;
                        return;
                } else if (scancode == 0xfe) {
                        resend = 1;
                        return;
                }
                /* strange ... */
                reply_expected = 1;
#if 0
                printk(KERN_DEBUG "keyboard reply expected - got %02x\n",
                       scancode);
#endif
        }
        if (scancode == 0) {
#ifdef KBD_REPORT_ERR
                printk(KERN_INFO "keyboard buffer overflow\n");
#endif
                prev_scancode = 0;
                return;
        }
        do_poke_blanked_console = 1;
        mark_bh(CONSOLE_BH);
        add_keyboard_randomness(scancode);
 
        tty = ttytab? ttytab[fg_console]: NULL;
        if (tty && (!tty->driver_data)) {
                /* This is to workaround ugly bug in tty_io.c, which
                   does not do locking when it should */
                tty = NULL;
        }
        kbd = kbd_table + fg_console;
        if ((raw_mode = (kbd->kbdmode == VC_RAW))) {
                put_queue(scancode);
                /* we do not return yet, because we want to maintain
                   the key_down array, so that we have the correct
                   values when finishing RAW mode or when changing VT's */
        }
 
        if (scancode == 0xff) {
                /* in scancode mode 1, my ESC key generates 0xff */
                /* the calculator keys on a FOCUS 9000 generate 0xff */
#ifndef KBD_IS_FOCUS_9000
#ifdef KBD_REPORT_ERR
                if (!raw_mode)
                  printk(KERN_DEBUG "keyboard error\n");
#endif
#endif
                prev_scancode = 0;
                return;
        }
 
        if (scancode == 0xe0 || scancode == 0xe1) {
                prev_scancode = scancode;
                return;
        }
 
        /*
         *  Convert scancode to keycode, using prev_scancode.
         */
        up_flag = (scancode & 0200);
        scancode &= 0x7f;
 
        if (prev_scancode) {
          /*
           * usually it will be 0xe0, but a Pause key generates
           * e1 1d 45 e1 9d c5 when pressed, and nothing when released
           */
          if (prev_scancode != 0xe0) {
              if (prev_scancode == 0xe1 && scancode == 0x1d) {
                  prev_scancode = 0x100;
                  return;
              } else if (prev_scancode == 0x100 && scancode == 0x45) {
                  keycode = E1_PAUSE;
                  prev_scancode = 0;
              } else {
#ifdef KBD_REPORT_UNKN
                  if (!raw_mode)
                    printk(KERN_INFO "keyboard: unknown e1 escape sequence\n");
#endif
                  prev_scancode = 0;
                  return;
              }
          } else {
              prev_scancode = 0;
              /*
               *  The keyboard maintains its own internal caps lock and
               *  num lock statuses. In caps lock mode E0 AA precedes make
               *  code and E0 2A follows break code. In num lock mode,
               *  E0 2A precedes make code and E0 AA follows break code.
               *  We do our own book-keeping, so we will just ignore these.
               */
              /*
               *  For my keyboard there is no caps lock mode, but there are
               *  both Shift-L and Shift-R modes. The former mode generates
               *  E0 2A / E0 AA pairs, the latter E0 B6 / E0 36 pairs.
               *  So, we should also ignore the latter. - aeb@cwi.nl
               */
              if (scancode == 0x2a || scancode == 0x36)
                return;
 
              if (e0_keys[scancode])
                keycode = e0_keys[scancode];
              else {
#ifdef KBD_REPORT_UNKN
                  if (!raw_mode)
                    printk(KERN_INFO "keyboard: unknown scancode e0 %02x\n",
                           scancode);
#endif
                  return;
              }
          }
        } else if (scancode >= SC_LIM) {
            /* This happens with the FOCUS 9000 keyboard
               Its keys PF1..PF12 are reported to generate
               55 73 77 78 79 7a 7b 7c 74 7e 6d 6f
               Moreover, unless repeated, they do not generate
               key-down events, so we have to zero up_flag below */
            /* Also, Japanese 86/106 keyboards are reported to
               generate 0x73 and 0x7d for \ - and \ | respectively. */
            /* Also, some Brazilian keyboard is reported to produce
               0x73 and 0x7e for \ ? and KP-dot, respectively. */
 
          keycode = high_keys[scancode - SC_LIM];
 
          if (!keycode) {
              if (!raw_mode) {
#ifdef KBD_REPORT_UNKN
                  printk(KERN_INFO "keyboard: unrecognized scancode (%02x)"
                         " - ignored\n", scancode);
#endif
              }
              return;
          }
        } else
          keycode = scancode;
 
        /*
         * At this point the variable `keycode' contains the keycode.
         * Note: the keycode must not be 0.
         * We keep track of the up/down status of the key, and
         * return the keycode if in MEDIUMRAW mode.
         */
 
        if (up_flag) {
                rep = 0;
                if(!clear_bit(keycode, key_down)) {
                    /* unexpected, but this can happen:
                       maybe this was a key release for a FOCUS 9000
                       PF key; if we want to see it, we have to clear
                       up_flag */
                    if (keycode >= SC_LIM || keycode == 85)
                      up_flag = 0;
                }
        } else
                rep = set_bit(keycode, key_down);
 
        if (raw_mode)
                return;
 
        if (kbd->kbdmode == VC_MEDIUMRAW) {
                /* soon keycodes will require more than one byte */
                put_queue(keycode + up_flag);
                return;
        }
 
        /*
         * Small change in philosophy: earlier we defined repetition by
         *       rep = keycode == prev_keycode;
         *       prev_keycode = keycode;
         * but now by the fact that the depressed key was down already.
         * Does this ever make a difference? Yes.
         */
 
        /*
         *  Repeat a key only if the input buffers are empty or the
         *  characters get echoed locally. This makes key repeat usable
         *  with slow applications and under heavy loads.
         */
        if (!rep ||
            (vc_kbd_mode(kbd,VC_REPEAT) && tty &&
             (L_ECHO(tty) || (tty->driver.chars_in_buffer(tty) == 0)))) {
                u_short keysym;
                u_char type;
 
                /* the XOR below used to be an OR */
                int shift_final = shift_state ^ kbd->lockstate ^ kbd->slockstate;
                ushort *key_map = key_maps[shift_final];
 
                if (key_map != NULL) {
                        keysym = key_map[keycode];
                        type = KTYP(keysym);
 
                        if (type >= 0xf0) {
                            type -= 0xf0;
                            if (type == KT_LETTER) {
                                type = KT_LATIN;
                                if (vc_kbd_led(kbd, VC_CAPSLOCK)) {
                                    key_map = key_maps[shift_final ^ (1<<KG_SHIFT)];
                                    if (key_map)
                                      keysym = key_map[keycode];
                                }
                            }
                            (*key_handler[type])(keysym & 0xff, up_flag);
                            if (type != KT_SLOCK)
                              kbd->slockstate = 0;
                        } else {
                            /* maybe only if (kbd->kbdmode == VC_UNICODE) ? */
                            if (!up_flag)
                              to_utf8(keysym);
                        }
                } else {
                        /* maybe beep? */
                        /* we have at least to update shift_state */
#if 1                   /* how? two almost equivalent choices follow */
                        compute_shiftstate();
#else
                        keysym = U(plain_map[keycode]);
                        type = KTYP(keysym);
                        if (type == KT_SHIFT)
                          (*key_handler[type])(keysym & 0xff, up_flag);
#endif
                }
        }
}
 
static void keyboard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
        unsigned char status;
 
        pt_regs = regs;
        disable_keyboard();
 
        status = inb_p(KBD_BASE_ADD+0x4);
        do {
                unsigned char scancode;
 
                /* mouse data? */
                if (status & kbd_read_mask & 0x20)
                        break;
 
                scancode = inb(KBD_BASE_ADD+0x0);
                if (status & 0x01)
                        handle_scancode(scancode);
 
                status = inb(KBD_BASE_ADD+0x4);
        } while (status & 0x01);
 
        mark_bh(KEYBOARD_BH);
        enable_keyboard();
}
 
static void put_queue(int ch)
{
        wake_up(&keypress_wait);
        if (tty) {
                tty_insert_flip_char(tty, ch, 0);
                tty_schedule_flip(tty);
        }
}
 
static void puts_queue(char *cp)
{
        wake_up(&keypress_wait);
        if (!tty)
                return;
 
        while (*cp) {
                tty_insert_flip_char(tty, *cp, 0);
                cp++;
        }
        tty_schedule_flip(tty);
}
 
static void applkey(int key, char mode)
{
        static char buf[] = { 0x1b, 'O', 0x00, 0x00 };
 
        buf[1] = (mode ? 'O' : '[');
        buf[2] = key;
        puts_queue(buf);
}
 
static void enter(void)
{
        put_queue(13);
        if (vc_kbd_mode(kbd,VC_CRLF))
                put_queue(10);
}
 
static void caps_toggle(void)
{
        if (rep)
                return;
        chg_vc_kbd_led(kbd, VC_CAPSLOCK);
}
 
static void caps_on(void)
{
        if (rep)
                return;
        set_vc_kbd_led(kbd, VC_CAPSLOCK);
}
 
static void show_ptregs(void)
{
        if (pt_regs)
                show_regs(pt_regs);
}
 
static void hold(void)
{
        if (rep || !tty)
                return;
 
        /*
         * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty);
         * these routines are also activated by ^S/^Q.
         * (And SCROLLOCK can also be set by the ioctl KDSKBLED.)
         */
        if (tty->stopped)
                start_tty(tty);
        else
                stop_tty(tty);
}
 
static void num(void)
{
        if (vc_kbd_mode(kbd,VC_APPLIC))
                applkey('P', 1);
        else
                bare_num();
}
 
/*
 * Bind this to Shift-NumLock if you work in application keypad mode
 * but want to be able to change the NumLock flag.
 * Bind this to NumLock if you prefer that the NumLock key always
 * changes the NumLock flag.
 */
static void bare_num(void)
{
        if (!rep)
                chg_vc_kbd_led(kbd,VC_NUMLOCK);
}
 
static void lastcons(void)
{
        /* switch to the last used console, ChN */
        set_console(last_console);
}
 
static void decr_console(void)
{
        int i;
 
        for (i = fg_console-1; i != fg_console; i--) {
                if (i == -1)
                        i = MAX_NR_CONSOLES-1;
                if (vc_cons_allocated(i))
                        break;
        }
        set_console(i);
}
 
static void incr_console(void)
{
        int i;
 
        for (i = fg_console+1; i != fg_console; i++) {
                if (i == MAX_NR_CONSOLES)
                        i = 0;
                if (vc_cons_allocated(i))
                        break;
        }
        set_console(i);
}
 
static void send_intr(void)
{
        if (!tty)
                return;
        tty_insert_flip_char(tty, 0, TTY_BREAK);
        tty_schedule_flip(tty);
}
 
static void scroll_forw(void)
{
        scrollfront(0);
}
 
static void scroll_back(void)
{
        scrollback(0);
}
 
static void boot_it(void)
{
        ctrl_alt_del();
}
 
static void compose(void)
{
        dead_key_next = 1;
}
 
int spawnpid, spawnsig;
 
static void spawn_console(void)
{
        if (spawnpid)
           if(kill_proc(spawnpid, spawnsig, 1))
             spawnpid = 0;
}
 
static void SAK(void)
{
        do_SAK(tty);
#if 0
        /*
         * Need to fix SAK handling to fix up RAW/MEDIUM_RAW and
         * vt_cons modes before we can enable RAW/MEDIUM_RAW SAK
         * handling.
         *
         * We should do this some day --- the whole point of a secure
         * attention key is that it should be guaranteed to always
         * work.
         */
        reset_vc(fg_console);
        do_unblank_screen();    /* not in interrupt routine? */
#endif
}
 
static void do_ignore(unsigned char value, char up_flag)
{
}
 
static void do_null()
{
        compute_shiftstate();
}
 
static void do_spec(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
        if (value >= SIZE(spec_fn_table))
                return;
        spec_fn_table[value]();
}
 
static void do_lowercase(unsigned char value, char up_flag)
{
        printk(KERN_ERR "keyboard.c: do_lowercase was called - impossible\n");
}
 
static void do_self(unsigned char value, char up_flag)
{
        if (up_flag)
                return;         /* no action, if this is a key release */
 
        if (diacr)
                value = handle_diacr(value);
 
        if (dead_key_next) {
                dead_key_next = 0;
                diacr = value;
                return;
        }
 
        put_queue(value);
}
 
#define A_GRAVE  '`'
#define A_ACUTE  '\''
#define A_CFLEX  '^'
#define A_TILDE  '~'
#define A_DIAER  '"'
#define A_CEDIL  ','
static unsigned char ret_diacr[NR_DEAD] =
        {A_GRAVE, A_ACUTE, A_CFLEX, A_TILDE, A_DIAER, A_CEDIL };
 
/* If a dead key pressed twice, output a character corresponding to it, */
/* otherwise just remember the dead key.                                */
 
static void do_dead(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
 
        value = ret_diacr[value];
        if (diacr == value) {   /* pressed twice */
                diacr = 0;
                put_queue(value);
                return;
        }
        diacr = value;
}
 
 
/* If space is pressed, return the character corresponding the pending  */
/* dead key, otherwise try to combine the two.                          */
 
unsigned char handle_diacr(unsigned char ch)
{
        int d = diacr;
        int i;
 
        diacr = 0;
        if (ch == ' ')
                return d;
 
        for (i = 0; i < accent_table_size; i++) {
                if (accent_table[i].diacr == d && accent_table[i].base == ch)
                        return accent_table[i].result;
        }
 
        put_queue(d);
        return ch;
}
 
static void do_cons(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
        set_console(value);
}
 
static void do_fn(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
        if (value < SIZE(func_table)) {
                if (func_table[value])
                        puts_queue(func_table[value]);
        } else
                printk(KERN_ERR "do_fn called with value=%d\n", value);
}
 
static void do_pad(unsigned char value, char up_flag)
{
        static const char *pad_chars = "0123456789+-*/\015,.?";
        static const char *app_map = "pqrstuvwxylSRQMnn?";
 
        if (up_flag)
                return;         /* no action, if this is a key release */
 
        /* kludge... shift forces cursor/number keys */
        if (vc_kbd_mode(kbd,VC_APPLIC) && !k_down[KG_SHIFT]) {
                applkey(app_map[value], 1);
                return;
        }
 
        if (!vc_kbd_led(kbd,VC_NUMLOCK))
                switch (value) {
                        case KVAL(K_PCOMMA):
                        case KVAL(K_PDOT):
                                do_fn(KVAL(K_REMOVE), 0);
                                return;
                        case KVAL(K_P0):
                                do_fn(KVAL(K_INSERT), 0);
                                return;
                        case KVAL(K_P1):
                                do_fn(KVAL(K_SELECT), 0);
                                return;
                        case KVAL(K_P2):
                                do_cur(KVAL(K_DOWN), 0);
                                return;
                        case KVAL(K_P3):
                                do_fn(KVAL(K_PGDN), 0);
                                return;
                        case KVAL(K_P4):
                                do_cur(KVAL(K_LEFT), 0);
                                return;
                        case KVAL(K_P6):
                                do_cur(KVAL(K_RIGHT), 0);
                                return;
                        case KVAL(K_P7):
                                do_fn(KVAL(K_FIND), 0);
                                return;
                        case KVAL(K_P8):
                                do_cur(KVAL(K_UP), 0);
                                return;
                        case KVAL(K_P9):
                                do_fn(KVAL(K_PGUP), 0);
                                return;
                        case KVAL(K_P5):
                                applkey('G', vc_kbd_mode(kbd, VC_APPLIC));
                                return;
                }
 
        put_queue(pad_chars[value]);
        if (value == KVAL(K_PENTER) && vc_kbd_mode(kbd, VC_CRLF))
                put_queue(10);
}
 
static void do_cur(unsigned char value, char up_flag)
{
        static const char *cur_chars = "BDCA";
        if (up_flag)
                return;
 
        applkey(cur_chars[value], vc_kbd_mode(kbd,VC_CKMODE));
}
 
static void do_shift(unsigned char value, char up_flag)
{
        int old_state = shift_state;
 
        if (rep)
                return;
 
        /* Mimic typewriter:
           a CapsShift key acts like Shift but undoes CapsLock */
        if (value == KVAL(K_CAPSSHIFT)) {
                value = KVAL(K_SHIFT);
                if (!up_flag)
                        clr_vc_kbd_led(kbd, VC_CAPSLOCK);
        }
 
        if (up_flag) {
                /* handle the case that two shift or control
                   keys are depressed simultaneously */
                if (k_down[value])
                        k_down[value]--;
        } else
                k_down[value]++;
 
        if (k_down[value])
                shift_state |= (1 << value);
        else
                shift_state &= ~ (1 << value);
 
        /* kludge */
        if (up_flag && shift_state != old_state && npadch != -1) {
                if (kbd->kbdmode == VC_UNICODE)
                  to_utf8(npadch & 0xffff);
                else
                  put_queue(npadch & 0xff);
                npadch = -1;
        }
}
 
/* called after returning from RAW mode or when changing consoles -
   recompute k_down[] and shift_state from key_down[] */
/* maybe called when keymap is undefined, so that shiftkey release is seen */
void compute_shiftstate(void)
{
        int i, j, k, sym, val;
 
        shift_state = 0;
        for(i=0; i < SIZE(k_down); i++)
          k_down[i] = 0;
 
        for(i=0; i < SIZE(key_down); i++)
          if(key_down[i]) {     /* skip this word if not a single bit on */
            k = i*BITS_PER_LONG;
            for(j=0; j<BITS_PER_LONG; j++,k++)
              if(test_bit(k, key_down)) {
                sym = U(plain_map[k]);
                if(KTYP(sym) == KT_SHIFT) {
                  val = KVAL(sym);
                  if (val == KVAL(K_CAPSSHIFT))
                    val = KVAL(K_SHIFT);
                  k_down[val]++;
                  shift_state |= (1<<val);
                }
              }
          }
}
 
static void do_meta(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
 
        if (vc_kbd_mode(kbd, VC_META)) {
                put_queue('\033');
                put_queue(value);
        } else
                put_queue(value | 0x80);
}
 
static void do_ascii(unsigned char value, char up_flag)
{
        int base;
 
        if (up_flag)
                return;
 
        if (value < 10)    /* decimal input of code, while Alt depressed */
            base = 10;
        else {       /* hexadecimal input of code, while AltGr depressed */
            value -= 10;
            base = 16;
        }
 
        if (npadch == -1)
          npadch = value;
        else
          npadch = npadch * base + value;
}
 
static void do_lock(unsigned char value, char up_flag)
{
        if (up_flag || rep)
                return;
        chg_vc_kbd_lock(kbd, value);
}
 
static void do_slock(unsigned char value, char up_flag)
{
        if (up_flag || rep)
                return;
        chg_vc_kbd_slock(kbd, value);
}
 
/*
 * send_data sends a character to the keyboard and waits
 * for a acknowledge, possibly retrying if asked to. Returns
 * the success status.
 */
static int send_data(unsigned char data)
{
        int retries = 3;
        int i;
 
        do {
                kb_wait();
                acknowledge = 0;
                resend = 0;
                reply_expected = 1;
 
                outb_p(data, KBD_BASE_ADD+0x0);
                for(i=0; i<0x200000; i++) {
                        extern void allow_interrupts(void);
                        allow_interrupts();
                        inb_p(KBD_BASE_ADD+0x4);                /* just as a delay */
                        if (acknowledge)
                                return 1;
                        if (resend)
                                break;
                }
                if (!resend)
                        return 0;
        } while (retries-- > 0);
        return 0;
}
 
/*
 * The leds display either (i) the status of NumLock, CapsLock, ScrollLock,
 * or (ii) whatever pattern of lights people want to show using KDSETLED,
 * or (iii) specified bits of specified words in kernel memory.
 */
 
static unsigned char ledstate = 0xff; /* undefined */
static unsigned char ledioctl;
 
unsigned char getledstate(void) {
    return ledstate;
}
 
void setledstate(struct kbd_struct *kbd, unsigned int led) {
    if (!(led & ~7)) {
        ledioctl = led;
        kbd->ledmode = LED_SHOW_IOCTL;
    } else
        kbd->ledmode = LED_SHOW_FLAGS;
    set_leds();
}
 
static struct ledptr {
    unsigned int *addr;
    unsigned int mask;
    unsigned char valid:1;
} ledptrs[3];
 
void register_leds(int console, unsigned int led,
                   unsigned int *addr, unsigned int mask) {
    struct kbd_struct *kbd = kbd_table + console;
    if (led < 3) {
        ledptrs[led].addr = addr;
        ledptrs[led].mask = mask;
        ledptrs[led].valid = 1;
        kbd->ledmode = LED_SHOW_MEM;
    } else
        kbd->ledmode = LED_SHOW_FLAGS;
}
 
static inline unsigned char getleds(void){
    struct kbd_struct *kbd = kbd_table + fg_console;
    unsigned char leds;
 
    if (kbd->ledmode == LED_SHOW_IOCTL)
      return ledioctl;
    leds = kbd->ledflagstate;
    if (kbd->ledmode == LED_SHOW_MEM) {
        if (ledptrs[0].valid) {
            if (*ledptrs[0].addr & ledptrs[0].mask)
              leds |= 1;
            else
              leds &= ~1;
        }
        if (ledptrs[1].valid) {
            if (*ledptrs[1].addr & ledptrs[1].mask)
              leds |= 2;
            else
              leds &= ~2;
        }
        if (ledptrs[2].valid) {
            if (*ledptrs[2].addr & ledptrs[2].mask)
              leds |= 4;
            else
              leds &= ~4;
        }
    }
    return leds;
}
 
/*
 * This routine is the bottom half of the keyboard interrupt
 * routine, and runs with all interrupts enabled. It does
 * console changing, led setting and copy_to_cooked, which can
 * take a reasonably long time.
 *
 * Aside from timing (which isn't really that important for
 * keyboard interrupts as they happen often), using the software
 * interrupt routines for this thing allows us to easily mask
 * this when we don't want any of the above to happen. Not yet
 * used, but this allows for easy and efficient race-condition
 * prevention later on.
 */
static void kbd_bh(void)
{
        unsigned char leds = getleds();
 
        if (leds != ledstate) {
                ledstate = leds;
                if (!send_data(0xed) || !send_data(leds))
                        send_data(0xf4);        /* re-enable kbd if any errors */
        }
}
 
int kbd_init(void)
{
        int i;
        struct kbd_struct kbd0;
        extern struct tty_driver console_driver;
 
        kbd0.ledflagstate = kbd0.default_ledflagstate = KBD_DEFLEDS;
        kbd0.ledmode = LED_SHOW_FLAGS;
        kbd0.lockstate = KBD_DEFLOCK;
        kbd0.slockstate = 0;
        kbd0.modeflags = KBD_DEFMODE;
        kbd0.kbdmode = VC_XLATE;
 
        for (i = 0 ; i < MAX_NR_CONSOLES ; i++)
                kbd_table[i] = kbd0;
 
        ttytab = console_driver.table;
 
        request_irq(KEYBOARD_IRQ, keyboard_interrupt, 0, "keyboard", NULL);
        request_region(KBD_BASE_ADD+0x0,16,"keyboard");
#ifdef INIT_KBD
        initialize_kbd();
#endif
        init_bh(KEYBOARD_BH, kbd_bh);
        mark_bh(KEYBOARD_BH);
        return 0;
}
 
#ifdef INIT_KBD
/*
 * keyboard controller registers
 */
#define KBD_STATUS_REG      (unsigned int) KBD_BASE_ADD+0x4
#define KBD_CNTL_REG        (unsigned int) KBD_BASE_ADD+0x4
#define KBD_DATA_REG        (unsigned int) KBD_BASE_ADD+0x0
/*
 * controller commands
 */
#define KBD_READ_MODE       (unsigned int) 0x20
#define KBD_WRITE_MODE      (unsigned int) 0x60
#define KBD_SELF_TEST       (unsigned int) 0xAA
#define KBD_SELF_TEST2      (unsigned int) 0xAB
#define KBD_CNTL_ENABLE     (unsigned int) 0xAE
/*
 * keyboard commands
 */
#define KBD_ENABLE          (unsigned int) 0xF4
#define KBD_DISABLE         (unsigned int) 0xF5
#define KBD_RESET           (unsigned int) 0xFF
/*
 * keyboard replies
 */
#define KBD_ACK             (unsigned int) 0xFA
#define KBD_POR             (unsigned int) 0xAA
/*
 * status register bits
 */
#define KBD_OBF             (unsigned int) 0x01
#define KBD_IBF             (unsigned int) 0x02
#define KBD_GTO             (unsigned int) 0x40
#define KBD_PERR            (unsigned int) 0x80
/*
 * keyboard controller mode register bits
 */
#define KBD_EKI             (unsigned int) 0x01
#define KBD_SYS             (unsigned int) 0x04
#define KBD_DMS             (unsigned int) 0x20
#define KBD_KCC             (unsigned int) 0x40
 
#define TIMEOUT_CONST   5000000
 
static int kbd_wait_for_input(void)
{
        int     n;
        int     status, data;
 
        n = TIMEOUT_CONST;
        do {
                status = inb(KBD_STATUS_REG);
                /*
                 * Wait for input data to become available.  This bit will
                 * then be cleared by the following read of the DATA
                 * register.
                 */
 
                if (!(status & KBD_OBF))
                        continue;
 
                data = inb(KBD_DATA_REG);
 
                /*
                 * Check to see if a timeout error has occurred.  This means
                 * that transmission was started but did not complete in the
                 * normal time cycle.  PERR is set when a parity error occurred
                 * in the last transmission.
                 */
                if (status & (KBD_GTO | KBD_PERR)) {
                        continue;
                }
                return (data & 0xff);
        } while (--n);
        return (-1);    /* timed-out if fell through to here... */
}
 
static void kbd_write(int address, int data)
{
        int status;
 
        do {
                status = inb(KBD_STATUS_REG);  /* spin until input buffer empty*/
        } while (status & KBD_IBF);
        outb(data, address);               /* write out the data*/
}
 
static int initialize_kbd(void)
{
        unsigned long flags;
 
        save_flags(flags); cli();
 
        /* Flush any pending input. */
        while (kbd_wait_for_input() != -1)
                continue;
 
        /*
         * Test the keyboard interface.
         * This seems to be the only way to get it going.
         * If the test is successful a x55 is placed in the input buffer.
         */
        kbd_write(KBD_CNTL_REG, KBD_SELF_TEST);
        if (kbd_wait_for_input() != 0x55) {
                printk(KERN_WARNING "initialize_kbd: "
                       "keyboard failed self test.\n");
                restore_flags(flags);
                return(-1);
        }
 
        /*
         * Perform a keyboard interface test.  This causes the controller
         * to test the keyboard clock and data lines.  The results of the
         * test are placed in the input buffer.
         */
        kbd_write(KBD_CNTL_REG, KBD_SELF_TEST2);
        if (kbd_wait_for_input() != 0x00) {
                printk(KERN_WARNING "initialize_kbd: "
                       "keyboard failed self test 2.\n");
                restore_flags(flags);
                return(-1);
        }
 
        /* Enable the keyboard by allowing the keyboard clock to run. */
        kbd_write(KBD_CNTL_REG, KBD_CNTL_ENABLE);
 
        /*
         * Reset keyboard. If the read times out
         * then the assumption is that no keyboard is
         * plugged into the machine.
         * This defaults the keyboard to scan-code set 2.
         */
        kbd_write(KBD_DATA_REG, KBD_RESET);
        if (kbd_wait_for_input() != KBD_ACK) {
                printk(KERN_WARNING "initialize_kbd: "
                       "reset kbd failed, no ACK.\n");
                restore_flags(flags);
                return(-1);
        }
 
        if (kbd_wait_for_input() != KBD_POR) {
                printk(KERN_WARNING "initialize_kbd: "
                       "reset kbd failed, not POR.\n");
                restore_flags(flags);
                return(-1);
        }
 
        /*
         * now do a DEFAULTS_DISABLE always
         */
        kbd_write(KBD_DATA_REG, KBD_DISABLE);
        if (kbd_wait_for_input() != KBD_ACK) {
                printk(KERN_WARNING "initialize_kbd: "
                       "disable kbd failed, no ACK.\n");
                restore_flags(flags);
                return(-1);
        }
 
        /*
         * Enable keyboard interrupt, operate in "sys" mode,
         *  enable keyboard (by clearing the disable keyboard bit),
         *  disable mouse, do conversion of keycodes.
         */
        kbd_write(KBD_CNTL_REG, KBD_WRITE_MODE);
        kbd_write(KBD_DATA_REG, KBD_EKI|KBD_SYS|KBD_DMS|KBD_KCC);
 
        /*
         * now ENABLE the keyboard to set it scanning...
         */
        kbd_write(KBD_DATA_REG, KBD_ENABLE);
        if (kbd_wait_for_input() != KBD_ACK) {
                printk(KERN_WARNING "initialize_kbd: "
                       "keyboard enable failed.\n");
                restore_flags(flags);
                return(-1);
        }
 
        restore_flags(flags);
 
        printk("PS/2 keyboard initialized at 0x%x (irq = %d).\n", KBD_BASE_ADD, KEYBOARD_IRQ);
        return (1);
}
#endif /* INIT_KBD */
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [char/] [keyboard.c] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1626	jcastillo	`/*`
2			`* linux/drivers/char/keyboard.c`
3			`*`
4			`* Keyboard driver for Linux v0.99 using Latin-1.`
5			`*`
6			`* Written for linux by Johan Myreen as a translation from`
7			`* the assembly version by Linus (with diacriticals added)`
8			`*`
9			`* Some additional features added by Christoph Niemann (ChN), March 1993`
10			`*`
11			`* Loadable keymaps by Risto Kankkunen, May 1993`
12			`*`
13			`* Diacriticals redone & other small changes, aeb@cwi.nl, June 1993`
14			`* Added decr/incr_console, dynamic keymaps, Unicode support,`
15			`* dynamic function/string keys, led setting, Sept 1994`
16			* `Sticky' modifier keys, 951006.
17			`*`
18			`*/`
19
20			`#define KEYBOARD_IRQ IRQ_PS2_0`
21			`#define DISABLE_KBD_DURING_INTERRUPTS 0`
22
23			`#include <linux/sched.h>`
24			`#include <linux/interrupt.h>`
25			`#include <linux/tty.h>`
26			`#include <linux/tty_flip.h>`
27			`#include <linux/mm.h>`
28			`#include <linux/ptrace.h>`
29			`#include <linux/signal.h>`
30			`#include <linux/string.h>`
31			`#include <linux/ioport.h>`
32			`#include <linux/random.h>`
33
34			`#include <asm/bitops.h>`
35			`#ifdef CONFIG_OR32`
36			`#include <asm/irq.h>`
37			`#endif`
38
39			`#include "kbd_kern.h"`
40			`#include "diacr.h"`