Subversion Repositories or1k

/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */

/*

        Written 1994-1998 by Bao C. Ha.

        Copyright (C) 1994-1998 by Bao C. Ha.

        This software may be used and distributed

        according to the terms of the GNU Public License,

        incorporated herein by reference.

        The author may be reached at bao@hacom.net

        or Hacom, 2477 Wrightsboro Rd., Augusta, GA 30904.

        Things remaining to do:

        Better record keeping of errors.

        Eliminate transmit interrupt to reduce overhead.

        Implement "concurrent processing". I won't be doing it!

        Bugs:

        If you have a problem of not detecting the 82595 during a

        reboot (warm reset), disable the FLASH memory should fix it.

        This is a compatibility hardware problem.

        Versions:

        0.10c   Some cosmetic changes. (9/28/98, BCH)

        0.10b   Should work now with (some) Pro/10+. At least for

                me (and my two cards) it does. _No_ guarantee for

                function with non-Pro/10+ cards! (don't have any)

                (RMC, 9/11/96)

        0.10    Added support for the Etherexpress Pro/10+.  The

                IRQ map was changed significantly from the old

                pro/10.  The new interrupt map was provided by

                Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu).

                (BCH, 9/3/96)

        0.09    Fixed a race condition in the transmit algorithm,

                which causes crashes under heavy load with fast

                pentium computers.  The performance should also

                improve a bit.  The size of RX buffer, and hence

                TX buffer, can also be changed via lilo or insmod.

                (BCH, 7/31/96)

        0.08    Implement 32-bit I/O for the 82595TX and 82595FX

                based lan cards.  Disable full-duplex mode if TPE

                is not used.  (BCH, 4/8/96)

        0.07a   Fix a stat report which counts every packet as a

                heart-beat failure. (BCH, 6/3/95)

        0.07    Modified to support all other 82595-based lan cards.

                The IRQ vector of the EtherExpress Pro will be set

                according to the value saved in the EEPROM.  For other

                cards, I will do autoirq_request() to grab the next

                available interrupt vector. (BCH, 3/17/95)

        0.06a,b Interim released.  Minor changes in the comments and

                print out format. (BCH, 3/9/95 and 3/14/95)

        0.06    First stable release that I am comfortable with. (BCH,

                3/2/95)

        0.05    Complete testing of multicast. (BCH, 2/23/95)

        0.04    Adding multicast support. (BCH, 2/14/95)

        0.03    First widely alpha release for public testing.

                (BCH, 2/14/95)

*/

static const char *version =

        "eepro.c: v0.10c 9/28/98 Bao C. Ha (bao@hacom.net)\n";

#include <linux/module.h>

/*

  Sources:

        This driver wouldn't have been written without the availability

        of the Crynwr's Lan595 driver source code.  It helps me to

        familiarize with the 82595 chipset while waiting for the Intel

        documentation.  I also learned how to detect the 82595 using

        the packet driver's technique.

        This driver is written by cutting and pasting the skeleton.c driver

        provided by Donald Becker.  I also borrowed the EEPROM routine from

        Donald Becker's 82586 driver.

        Datasheet for the Intel 82595 (including the TX and FX version). It

        provides just enough info that the casual reader might think that it

        documents the i82595.

        The User Manual for the 82595.  It provides a lot of the missing

        information.

*/

#include <linux/kernel.h>

#include <linux/sched.h>

#include <linux/types.h>

#include <linux/fcntl.h>

#include <linux/interrupt.h>

#include <linux/ptrace.h>

#include <linux/ioport.h>

#include <linux/in.h>

#include <linux/malloc.h>

#include <linux/string.h>

#include <asm/system.h>

#include <asm/bitops.h>

#include <asm/io.h>

#include <asm/dma.h>

#include <linux/errno.h>

#include <linux/netdevice.h>

#include <linux/etherdevice.h>

#include <linux/skbuff.h>

/* First, a few definitions that the brave might change. */

/* A zero-terminated list of I/O addresses to be probed. */

static unsigned int eepro_portlist[] =

   { 0x300, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};

/* use 0 for production, 1 for verification, >2 for debug */

#ifndef NET_DEBUG

#define NET_DEBUG 1

#endif

static unsigned int net_debug = NET_DEBUG;

/* The number of low I/O ports used by the ethercard. */

#define EEPRO_IO_EXTENT 16

/* Different 82595 chips */

#define LAN595          0

#define LAN595TX        1

#define LAN595FX        2

/* Information that need to be kept for each board. */

struct eepro_local {

        struct enet_statistics stats;

        unsigned rx_start;

        unsigned tx_start; /* start of the transmit chain */

        int tx_last;  /* pointer to last packet in the transmit chain */

        unsigned tx_end;   /* end of the transmit chain (plus 1) */

        int eepro;      /* 1 for the EtherExpress Pro/10,

                           2 for the EtherExpress Pro/10+,

        int version;    /* a flag to indicate if this is a TX or FX

                                   version of the 82595 chip. */

        int stepping;

};

/* The station (ethernet) address prefix, used for IDing the board. */

#define SA_ADDR0 0x00   /* Etherexpress Pro/10 */

#define SA_ADDR1 0xaa

#define SA_ADDR2 0x00

#define SA2_ADDR0 0x00  /* Etherexpress Pro/10+ */

#define SA2_ADDR1 0xa0

#define SA2_ADDR2 0xc9

#define SA3_ADDR0 0x00  /* more Etherexpress Pro/10+ */

#define SA3_ADDR1 0xaa

#define SA3_ADDR2 0x00

#define SA3_ADDR3 0xc9

/* Index to functions, as function prototypes. */

extern int eepro_probe(struct device *dev);

static int      eepro_probe1(struct device *dev, short ioaddr);

static int      eepro_open(struct device *dev);

static int      eepro_send_packet(struct sk_buff *skb, struct device *dev);

static void     eepro_interrupt(int irq, void *dev_id, struct pt_regs *regs);

static void     eepro_rx(struct device *dev);

static void     eepro_transmit_interrupt(struct device *dev);

static int      eepro_close(struct device *dev);

static struct enet_statistics *eepro_get_stats(struct device *dev);

static void set_multicast_list(struct device *dev);

static int read_eeprom(int ioaddr, int location);

static void hardware_send_packet(struct device *dev, void *buf, short length);

static int      eepro_grab_irq(struct device *dev);

/*

                        Details of the i82595.

You will need either the datasheet or the user manual to understand what

is going on here.  The 82595 is very different from the 82586, 82593.

The receive algorithm in eepro_rx() is just an implementation of the

RCV ring structure that the Intel 82595 imposes at the hardware level.

The receive buffer is set at 24K, and the transmit buffer is 8K.  I

am assuming that the total buffer memory is 32K, which is true for the

Intel EtherExpress Pro/10.  If it is less than that on a generic card,

the driver will be broken.

The transmit algorithm in the hardware_send_packet() is similar to the

one in the eepro_rx().  The transmit buffer is a ring linked list.

I just queue the next available packet to the end of the list.  In my

system, the 82595 is so fast that the list seems to always contain a

single packet.  In other systems with faster computers and more congested

network traffics, the ring linked list should improve performance by

allowing up to 8K worth of packets to be queued.

The sizes of the receive and transmit buffers can now be changed via lilo

or insmod.  Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0"

where rx-buffer is in KB unit.  Modules uses the parameter mem which is

also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer."

The receive buffer has to be more than 3K or less than 29K.  Otherwise,

it is reset to the default of 24K, and, hence, 8K for the trasnmit

buffer (transmit-buffer = 32K - receive-buffer).

*/

#define RAM_SIZE        0x8000

#define RCV_HEADER      8

#define RCV_RAM         0x6000  /* 24KB default for RCV buffer */

#define RCV_LOWER_LIMIT 0x00    /* 0x0000 */

/* #define RCV_UPPER_LIMIT ((RCV_RAM - 2) >> 8) */    /* 0x5ffe */

#define RCV_UPPER_LIMIT (((rcv_ram) - 2) >> 8)   

/* #define XMT_RAM         (RAM_SIZE - RCV_RAM) */    /* 8KB for XMT buffer */

#define XMT_RAM         (RAM_SIZE - (rcv_ram))    /* 8KB for XMT buffer */

/* #define XMT_LOWER_LIMIT (RCV_RAM >> 8) */  /* 0x6000 */

#define XMT_LOWER_LIMIT ((rcv_ram) >> 8) 

#define XMT_UPPER_LIMIT ((RAM_SIZE - 2) >> 8)   /* 0x7ffe */

#define XMT_HEADER      8

#define RCV_DONE        0x0008

#define RX_OK           0x2000

#define RX_ERROR        0x0d81

#define TX_DONE_BIT     0x0080

#define CHAIN_BIT       0x8000

#define XMT_STATUS      0x02

#define XMT_CHAIN       0x04

#define XMT_COUNT       0x06

#define BANK0_SELECT    0x00            

#define BANK1_SELECT    0x40            

#define BANK2_SELECT    0x80            

/* Bank 0 registers */

#define COMMAND_REG     0x00    /* Register 0 */

#define MC_SETUP        0x03

#define XMT_CMD         0x04

#define DIAGNOSE_CMD    0x07

#define RCV_ENABLE_CMD  0x08

#define RCV_DISABLE_CMD 0x0a

#define STOP_RCV_CMD    0x0b

#define RESET_CMD       0x0e

#define POWER_DOWN_CMD  0x18

#define RESUME_XMT_CMD  0x1c

#define SEL_RESET_CMD   0x1e

#define STATUS_REG      0x01    /* Register 1 */

#define RX_INT          0x02

#define TX_INT          0x04

#define EXEC_STATUS     0x30

#define ID_REG          0x02    /* Register 2   */

#define R_ROBIN_BITS    0xc0    /* round robin counter */

#define ID_REG_MASK     0x2c

#define ID_REG_SIG      0x24

#define AUTO_ENABLE     0x10

#define INT_MASK_REG    0x03    /* Register 3   */

#define RX_STOP_MASK    0x01

#define RX_MASK         0x02

#define TX_MASK         0x04

#define EXEC_MASK       0x08

#define ALL_MASK        0x0f

#define IO_32_BIT       0x10

#define RCV_BAR         0x04    /* The following are word (16-bit) registers */

#define RCV_STOP        0x06

#define XMT_BAR         0x0a

#define HOST_ADDRESS_REG        0x0c

#define IO_PORT         0x0e

#define IO_PORT_32_BIT  0x0c

/* Bank 1 registers */

#define REG1    0x01

#define WORD_WIDTH      0x02

#define INT_ENABLE      0x80

#define INT_NO_REG      0x02

#define RCV_LOWER_LIMIT_REG     0x08

#define RCV_UPPER_LIMIT_REG     0x09

#define XMT_LOWER_LIMIT_REG     0x0a

#define XMT_UPPER_LIMIT_REG     0x0b

/* Bank 2 registers */

#define XMT_Chain_Int   0x20    /* Interrupt at the end of the transmit chain */

#define XMT_Chain_ErrStop       0x40 /* Interrupt at the end of the chain even if there are errors */

#define RCV_Discard_BadFrame    0x80 /* Throw bad frames away, and continue to receive others */

#define REG2            0x02

#define PRMSC_Mode      0x01

#define Multi_IA        0x20

#define REG3            0x03

#define TPE_BIT         0x04

#define BNC_BIT         0x20

#define REG13           0x0d

#define FDX             0x00

#define A_N_ENABLE      0x02

#define I_ADD_REG0      0x04

#define I_ADD_REG1      0x05

#define I_ADD_REG2      0x06

#define I_ADD_REG3      0x07

#define I_ADD_REG4      0x08

#define I_ADD_REG5      0x09

#define EEPROM_REG 0x0a

#define EESK 0x01

#define EECS 0x02

#define EEDI 0x04

#define EEDO 0x08

/* Check for a network adaptor of this type, and return '0' if one exists.

   If dev->base_addr == 0, probe all likely locations.

   If dev->base_addr == 1, always return failure.

   If dev->base_addr == 2, allocate space for the device and return success

   (detachable devices only).

   */

#ifdef HAVE_DEVLIST

/* Support for a alternate probe manager, which will eliminate the

   boilerplate below. */

struct netdev_entry netcard_drv =

{"eepro", eepro_probe1, EEPRO_IO_EXTENT, eepro_portlist};

#else

int

eepro_probe(struct device *dev)

{

        int i;

        int base_addr = dev ? dev->base_addr : 0;

        if (base_addr > 0x1ff)          /* Check a single specified location. */

                return eepro_probe1(dev, base_addr);

        else if (base_addr != 0) /* Don't probe at all. */

                return ENXIO;

        for (i = 0; eepro_portlist[i]; i++) {

                int ioaddr = eepro_portlist[i];

                if (check_region(ioaddr, EEPRO_IO_EXTENT))

                        continue;

                if (eepro_probe1(dev, ioaddr) == 0)

                        return 0;

        }

        return ENODEV;

}

#endif

/* This is the real probe routine.  Linux has a history of friendly device

   probes on the ISA bus.  A good device probes avoids doing writes, and

   verifies that the correct device exists and functions.  */

int

eepro_probe1(struct device *dev, short ioaddr)

{

        unsigned short station_addr[6], id, counter;

        int i;

        int eepro;

        const char *ifmap[] = {"AUI", "10Base2", "10BaseT"};

        enum iftype { AUI=0, BNC=1, TPE=2 };

        /* Now, we are going to check for the signature of the

           ID_REG (register 2 of bank 0) */

        if (((id=inb(ioaddr + ID_REG)) & ID_REG_MASK) == ID_REG_SIG) {

                /* We seem to have the 82595 signature, let's

                   play with its counter (last 2 bits of

                   register 2 of bank 0) to be sure. */

                counter = (id & R_ROBIN_BITS);

                if (((id=inb(ioaddr+ID_REG)) & R_ROBIN_BITS) ==

                        (counter + 0x40)) {

                        /* Yes, the 82595 has been found */

                        /* Now, get the ethernet hardware address from

                           the EEPROM */

                        station_addr[0] = read_eeprom(ioaddr, 2);

                        station_addr[1] = read_eeprom(ioaddr, 3);

                        station_addr[2] = read_eeprom(ioaddr, 4);

                        /* Check the station address for the manufacturer's code */

                        if ((station_addr[2] == 0x00aa) && (station_addr[1]!= 0x00c9)) {

                                eepro = 1;

                                printk("%s: Intel EtherExpress Pro/10 ISA at %#x,",

                                        dev->name, ioaddr);

                        } else

                        if ( (station_addr[2] == 0x00a0)

                             || ((station_addr[2] == 0x00aa) && (station_addr[1] == 0x00c9) )) {

                                eepro = 2;

                                printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",

                                        dev->name, ioaddr);

                        }

                        else {

                                eepro = 0;

                                printk("%s: Intel 82595-based lan card at %#x,",

                                        dev->name, ioaddr);

                        }

                        /* Fill in the 'dev' fields. */

                        dev->base_addr = ioaddr;

                        for (i=0; i < 6; i++) {

                                dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];

                                printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);

                        }

                        if ((dev->mem_end & 0x3f) < 3 ||        /* RX buffer must be more than 3K */

                                (dev->mem_end & 0x3f) > 29)     /* and less than 29K */

                                dev->mem_end = RCV_RAM;         /* or it will be set to 24K */

                        else dev->mem_end = 1024*dev->mem_end;  /* Maybe I should shift << 10 */

                        /* From now on, dev->mem_end contains the actual size of rx buffer */

                        if (net_debug > 3)

                                printk(", %dK RCV buffer", (int)(dev->mem_end)/1024);

                        outb(BANK2_SELECT, ioaddr); /* be CAREFUL, BANK 2 now */

                        id = inb(ioaddr + REG3);

                        if (id & TPE_BIT)

                                dev->if_port = TPE;

                        else dev->if_port = BNC;

                        if (net_debug>3)

                                printk("id: %x\n", id);

                        if (dev->irq < 2 && eepro) {

                                i = read_eeprom(ioaddr, 1);

                                if (eepro == 1)

                                   switch (i & 0x07) {

                                        case 0:  dev->irq = 9; break;

                                        case 1: dev->irq = 3; break;

                                        case 2: dev->irq = 5; break;

                                        case 3: dev->irq = 10; break;

                                        case 4: dev->irq = 11; break;

                                        default: /* should never get here !!!!! */

                                                printk(" illegal interrupt vector stored in EEPROM.\n");

                                                return ENODEV;

                                        }

                                else switch (i & 0x07) {

                                        case 0:  dev->irq = 3; break;

                                        case 1: dev->irq = 4; break;

                                        case 2: dev->irq = 5; break;

                                        case 3: dev->irq = 7; break;

                                        case 4: dev->irq = 9; break;

                                        case 5: dev->irq = 10; break;

                                        case 6: dev->irq = 11; break;

                                        case 7: dev->irq = 12; break;

                                        }

                                }

                        else if (dev->irq == 2)

                                dev->irq = 9;

                        if (dev->irq > 2) {

                                printk(", IRQ %d, %s.\n", dev->irq,

                                                ifmap[dev->if_port]);

                                if (request_irq(dev->irq, &eepro_interrupt, 0, "eepro", NULL)) {

                                        printk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);

                                        return -EAGAIN;

                                }

                        }

                        else printk(", %s.\n", ifmap[dev->if_port]);

                        if ((dev->mem_start & 0xf) > 0)  /* I don't know if this is */

                                net_debug = dev->mem_start & 7; /* still useful or not */

                        if (net_debug > 3) {

                                i = read_eeprom(ioaddr, 5);

                                if (i & 0x2000) /* bit 13 of EEPROM word 5 */

                                        printk("%s: Concurrent Processing is enabled but not used!\n",

                                                dev->name);

                        }

                        if (net_debug)

                                printk(version);

                        /* Grab the region so we can find another board if autoIRQ fails. */

                        request_region(ioaddr, EEPRO_IO_EXTENT, "eepro");

                        /* Initialize the device structure */

                        dev->priv = kmalloc(sizeof(struct eepro_local), GFP_KERNEL);

                        if (dev->priv == NULL)

                                return -ENOMEM;

                        memset(dev->priv, 0, sizeof(struct eepro_local));

                        dev->open = eepro_open;

                        dev->stop = eepro_close;

                        dev->hard_start_xmit = eepro_send_packet;

                        dev->get_stats = eepro_get_stats;

                        dev->set_multicast_list = &set_multicast_list;

                        /* Fill in the fields of the device structure with

                           ethernet generic values */

                        ether_setup(dev);

                        outb(RESET_CMD, ioaddr); /* RESET the 82595 */

                        return 0;

                        }

                else return ENODEV;

                }

        else if (net_debug > 3)

                printk ("EtherExpress Pro probed failed!\n");

        return ENODEV;

}

/* Open/initialize the board.  This is called (in the current kernel)

   sometime after booting when the 'ifconfig' program is run.

   This routine should set everything up anew at each open, even

   registers that "should" only need to be set once at boot, so that

   there is non-reboot way to recover if something goes wrong.

   */

static char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};

static char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};

static int

eepro_grab_irq(struct device *dev)

{

        int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12 };

        int *irqp = irqlist, temp_reg, ioaddr = dev->base_addr;

        outb(BANK1_SELECT, ioaddr); /* be CAREFUL, BANK 1 now */

        /* Enable the interrupt line. */

        temp_reg = inb(ioaddr + REG1);

        outb(temp_reg | INT_ENABLE, ioaddr + REG1);

        outb(BANK0_SELECT, ioaddr); /* be CAREFUL, BANK 0 now */

        /* clear all interrupts */

        outb(ALL_MASK, ioaddr + STATUS_REG);

        /* Let EXEC event to interrupt */

        outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG);

        do {

                outb(BANK1_SELECT, ioaddr); /* be CAREFUL, BANK 1 now */

                temp_reg = inb(ioaddr + INT_NO_REG);

                outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG);

                outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */

                if (request_irq (*irqp, NULL, 0, "bogus", NULL) != EBUSY) {

                        /* Twinkle the interrupt, and check if it's seen */

                        autoirq_setup(0);

                        outb(DIAGNOSE_CMD, ioaddr); /* RESET the 82595 */

                        if (*irqp == autoirq_report(2) &&  /* It's a good IRQ line */

                                (request_irq(dev->irq = *irqp, &eepro_interrupt, 0, "eepro", NULL) == 0))

                                        break;

                        /* clear all interrupts */

                        outb(ALL_MASK, ioaddr + STATUS_REG);

                }

        } while (*++irqp);

        outb(BANK1_SELECT, ioaddr); /* Switch back to Bank 1 */

        /* Disable the physical interrupt line. */

        temp_reg = inb(ioaddr + REG1);

        outb(temp_reg & 0x7f, ioaddr + REG1);

        outb(BANK0_SELECT, ioaddr); /* Switch back to Bank 0 */

        /* Mask all the interrupts. */

        outb(ALL_MASK, ioaddr + INT_MASK_REG);

        /* clear all interrupts */

        outb(ALL_MASK, ioaddr + STATUS_REG);

        return dev->irq;

}

static int

eepro_open(struct device *dev)

{

        unsigned short temp_reg, old8, old9;

        int i, ioaddr = dev->base_addr, rcv_ram = dev->mem_end;

        struct eepro_local *lp = (struct eepro_local *)dev->priv;

        if (net_debug > 3)

                printk("eepro: entering eepro_open routine.\n");

        if ((dev->dev_addr[0] == SA_ADDR0 &&

                        dev->dev_addr[1] == SA_ADDR1 &&

                        dev->dev_addr[2] == SA_ADDR2)&&

                        (dev->dev_addr[3] != SA3_ADDR3))

                {

                        lp->eepro = 1;

                        if (net_debug > 3) printk("p->eepro = 1;\n");

                }  /* Yes, an Intel EtherExpress Pro/10 */

        else if ((dev->dev_addr[0] == SA2_ADDR0 &&

                        dev->dev_addr[1] == SA2_ADDR1 &&

                        dev->dev_addr[2] == SA2_ADDR2)||

                (dev->dev_addr[0] == SA3_ADDR0 &&

                        dev->dev_addr[1] == SA3_ADDR1 &&

                        dev->dev_addr[2] == SA3_ADDR2 &&

                        dev->dev_addr[3] == SA3_ADDR3))

                {

                        lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */

                        if (net_debug > 3) printk("p->eepro = 2;\n");

                }

        else lp->eepro = 0; /* No, it is a generic 82585 lan card */

        /* Get the interrupt vector for the 82595 */

        if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {

                printk("%s: unable to get IRQ %d.\n", dev->name, dev->irq);

                return -EAGAIN;

        }

        if (irq2dev_map[dev->irq] != 0

                || (irq2dev_map[dev->irq] = dev) == 0)

                return -EAGAIN;

        /* Initialize the 82595. */

        outb(BANK2_SELECT, ioaddr); /* be CAREFUL, BANK 2 now */

        temp_reg = inb(ioaddr + EEPROM_REG);

        lp->stepping = temp_reg >> 5;   /* Get the stepping number of the 595 */

        if (net_debug > 3)

                printk("The stepping of the 82595 is %d\n", lp->stepping);

        if (temp_reg & 0x10) /* Check the TurnOff Enable bit */

                outb(temp_reg & 0xef, ioaddr + EEPROM_REG);

        for (i=0; i < 6; i++)

                outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i);

        temp_reg = inb(ioaddr + REG1);    /* Setup Transmit Chaining */

        outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */

                | RCV_Discard_BadFrame, ioaddr + REG1);

        temp_reg = inb(ioaddr + REG2); /* Match broadcast */

        outb(temp_reg | 0x14, ioaddr + REG2);

        temp_reg = inb(ioaddr + REG3);

        outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */

        /* Set the receiving mode */

        outb(BANK1_SELECT, ioaddr); /* be CAREFUL, BANK 1 now */

        /* Set the interrupt vector */

        temp_reg = inb(ioaddr + INT_NO_REG);

        if (lp->eepro == 2)

                outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG);

        else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);

        temp_reg = inb(ioaddr + INT_NO_REG);

        if (lp->eepro == 2)

                outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG);

        else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);

        if (net_debug > 3)

                printk("eepro_open: content of INT Reg is %x\n", temp_reg);

        /* Initialize the RCV and XMT upper and lower limits */

        outb(RCV_LOWER_LIMIT, ioaddr + RCV_LOWER_LIMIT_REG);