URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [net/] [pt.c] - Blame information for rev 1777

Go to most recent revision | Details | Compare with Previous | View Log

#undef PT_DEBUG 1
/*
 * pt.c: Linux device driver for the Gracilis PackeTwin.
 * Copyright (c) 1995 Craig Small VK2XLZ (vk2xlz@vk2xlz.ampr.org.)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2, as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge MA 02139, USA.
 *
 * This driver is largely based upon the PI driver by David Perry.
 *
 * Revision History
 * 23/02/95 cs  Started again on driver, last one scrapped
 * 27/02/95 cs  Program works, we have chan A only.  Tx stays on
 * 28/02/95 cs  Fix Tx problem (& TxUIE instead of | )
 *              Fix Chan B Tx timer problem, used TMR2 instead of TMR1
 * 03/03/95 cs  Painfully found out (after 3 days) SERIAL_CFG is write only
 *              created image of it and DMA_CFG
 * 21/06/95 cs  Upgraded to suit PI driver 0.8 ALPHA
 * 22/08/95     cs      Changed it all around to make it like pi driver
 * 23/08/95 cs  It now works, got caught again by TMR2 and we must have
 *                              auto-enables for daughter boards.
 * 07/10/95 cs  Fixed for 1.3.30 (hopefully)
 * 26/11/95 cs  Fixed for 1.3.43, ala 29/10 for pi2.c by ac
 * 21/12/95 cs  Got rid of those nasty warnings when compiling, for 1.3.48
 * 08/08/96 jsn Convert to use as a module. Removed send_kiss, empty_scc and
 *              pt_loopback functions - they were unused.
 */
 
/*
 * default configuration of the PackeTwin,
 * ie What Craig uses his PT for.
 */
#define PT_DMA 3
 
#define DEF_A_SPEED     4800            /* 4800 baud */
#define DEF_A_TXDELAY   350             /* 350 mS */
#define DEF_A_PERSIST   64              /* 25% persistence */
#define DEF_A_SLOTIME   10              /* 10 mS */
#define DEF_A_SQUELDELAY 30             /* 30 mS */
#define DEF_A_CLOCKMODE 0                /* Normal clock mode */
#define DEF_A_NRZI              1               /* NRZI mode */
 
#define DEF_B_SPEED     0                /* 0 means external clock */
#define DEF_B_TXDELAY   250             /* 250 mS */
#define DEF_B_PERSIST   64              /* 25% */
#define DEF_B_SLOTIME   10              /* 10 mS */
#define DEF_B_SQUELDELAY 30             /* 30 mS */
#define DEF_B_CLOCKMODE 0               /* Normal clock mode ?!? */
#define DEF_B_NRZI              1               /* NRZI mode */
 
 
#define PARAM_TXDELAY   1
#define PARAM_PERSIST   2
#define PARAM_SLOTTIME  3
#define PARAM_FULLDUP   5
#define PARAM_HARDWARE  6
#define PARAM_RETURN    255
 
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/malloc.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/segment.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/timer.h>
#include <linux/if_arp.h>
#include <linux/pt.h>
#include "z8530.h"
#include <net/ax25.h>
 
struct mbuf {
    struct mbuf *next;
    int cnt;
    char data[0];
};
 
/*
 * The actual PT devices we will use
 */
static int pt0_preprobe(struct device *dev) {return 0;} /* Dummy probe function */
static struct device pt0a = { "pt0a", 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, pt0_preprobe };
static struct device pt0b = { "pt0b", 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, pt0_preprobe };
 
/* Ok, they shouldn't be here, but both channels share them */
/* The Images of the Serial and DMA config registers */
static unsigned char pt_sercfg = 0;
static unsigned char pt_dmacfg = 0;
 
/* The number of IO ports used by the card */
#define PT_TOTAL_SIZE   16
 
/* Index to functions, as function prototypes. */
 
static int pt_probe(struct device *dev);
static int pt_open(struct device *dev);
static int pt_send_packet(struct sk_buff *skb, struct device *dev);
static void pt_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int pt_close(struct device *dev);
static int pt_ioctl(struct device *dev, struct ifreq *ifr, int cmd);
static struct enet_statistics *pt_get_stats(struct device *dev);
static void pt_rts(struct pt_local *lp, int x);
static void pt_rxisr(struct device *dev);
static void pt_txisr(struct pt_local *lp);
static void pt_exisr(struct pt_local *lp);
static void pt_tmrisr(struct pt_local *lp);
static char *get_dma_buffer(unsigned long *mem_ptr);
static int valid_dma_page(unsigned long addr, unsigned long dev_buffsize);
static int hw_probe(int ioaddr);
static void tdelay(struct pt_local *lp, int time);
static void chipset_init(struct device *dev);
 
static char ax25_bcast[7] =
{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
static char ax25_test[7] =
{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
 
 
 
static int ext2_secrm_seed = 152;
 
static inline unsigned char random(void)
{
    return (unsigned char) (ext2_secrm_seed = ext2_secrm_seed * 60691 + 1);
}
 
static inline void wrtscc(int cbase, int ctl, int sccreg, unsigned char val)
{
    outb_p(sccreg, ctl);        /* Select register */
    outb_p(val, ctl);           /* Output value */
}
 
static inline unsigned char rdscc(int cbase, int ctl, int sccreg)
{
    unsigned char retval;
 
    outb_p(sccreg, ctl);        /* Select register */
    retval = inb_p(ctl);
    return retval;
}
 
static void switchbuffers(struct pt_local *lp)
{
    if (lp->rcvbuf == lp->rxdmabuf1)
        lp->rcvbuf = lp->rxdmabuf2;
    else
        lp->rcvbuf = lp->rxdmabuf1;
}
 
static void hardware_send_packet(struct pt_local *lp, struct sk_buff *skb)
{
    char kickflag;
    unsigned long flags;
    char *ptr;
    struct device *dev;
 
        /* First, let's see if this packet is actually a KISS packet */
        ptr = skb->data;
        if (ptr[0] != 0 && skb->len >= 2)
        {
#ifdef PT_DEBUG
                printk(KERN_DEBUG "PT: Rx KISS... Control = %d, value = %d.\n", ptr[0], (skb->len > 1? ptr[1] : -1));
#endif
                /* Kludge to get device */
                if ((struct pt_local*)(&pt0b.priv) == lp)
                        dev = &pt0b;
                else
                        dev = &pt0a;
                switch(ptr[0])
                {
 
                        case PARAM_TXDELAY:
                                /*TxDelay is in 10mS increments */
                                lp->txdelay = ptr[1] * 10;
                                break;
                        case PARAM_PERSIST:
                                lp->persist = ptr[1];
                                break;
                        case PARAM_SLOTTIME:
                                lp->slotime = ptr[1];
                                break;
                        case PARAM_FULLDUP:
                                /* Yeah right, you wish!  Fullduplex is a little while to
                                 * go folks, but this is how you fire it up
                                 */
                                break;
                        /* Perhaps we should have txtail here?? */
                } /*switch */
                return;
        }
 
    lp->stats.tx_packets++;
 
    save_flags(flags);
    cli();
    kickflag = (skb_peek(&lp->sndq) == NULL) && (lp->sndbuf == NULL);
    restore_flags(flags);
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: hardware_send_packet(): kickflag = %d (%d).\n", kickflag, lp->base & CHANA);
#endif  
    skb_queue_tail(&lp->sndq, skb);
    if (kickflag) {
        /* Simulate interrupt to transmit */
            if (lp->dmachan)
            {
                pt_txisr(lp);
            } else {
                save_flags(flags);
                        cli();
                if (lp->tstate == IDLE)
                        pt_txisr(lp);
                restore_flags(flags);
            }
    }
} /* hardware_send_packet() */
 
static void setup_rx_dma(struct pt_local *lp)
{
    unsigned long flags;
    int cmd;
    unsigned long dma_abs;
    unsigned char dmachan;
 
    save_flags(flags);
    cli();
 
    dma_abs = (unsigned long) (lp->rcvbuf->data);
    dmachan = lp->dmachan;
    cmd = lp->base + CTL;
 
    if(!valid_dma_page(dma_abs, DMA_BUFF_SIZE + sizeof(struct mbuf)))
        panic("PI: RX buffer violates DMA boundary!");
 
    /* Get ready for RX DMA */
    wrtscc(lp->cardbase, cmd, R1, WT_FN_RDYFN | WT_RDY_RT | INT_ERR_Rx | EXT_INT_ENAB);
 
    disable_dma(dmachan);
    clear_dma_ff(dmachan);
 
    /* Set DMA mode register to single transfers, incrementing address,
     *  auto init, writes
     */
    set_dma_mode(dmachan, DMA_MODE_READ | 0x10);
    set_dma_addr(dmachan, dma_abs);
    set_dma_count(dmachan, lp->bufsiz);
    enable_dma(dmachan);
 
    /* If a packet is already coming in, this line is supposed to
           avoid receiving a partial packet.
     */
    wrtscc(lp->cardbase, cmd, R0, RES_Rx_CRC);
 
    /* Enable RX dma */
    wrtscc(lp->cardbase, cmd, R1,
      WT_RDY_ENAB | WT_FN_RDYFN | WT_RDY_RT | INT_ERR_Rx | EXT_INT_ENAB);
 
    restore_flags(flags);
}
 
static void setup_tx_dma(struct pt_local *lp, int length)
{
    unsigned long dma_abs;
    unsigned long flags;
    unsigned long dmachan;
 
    save_flags(flags);
    cli();
 
    dmachan = lp->dmachan;
    dma_abs = (unsigned long) (lp->txdmabuf);
 
    if(!valid_dma_page(dma_abs, DMA_BUFF_SIZE + sizeof(struct mbuf)))
        panic("PT: TX buffer violates DMA boundary!");
 
    disable_dma(dmachan);
    /* Set DMA mode register to single transfers, incrementing address,
     *  no auto init, reads
     */
    set_dma_mode(dmachan, DMA_MODE_WRITE);
    clear_dma_ff(dmachan);
    set_dma_addr(dmachan, dma_abs);
    /* output byte count */
    set_dma_count(dmachan, length);
 
    restore_flags(flags);
}
 
static void free_p(struct sk_buff *skb)
{
    dev_kfree_skb(skb, FREE_WRITE);
}
 
/* Fill in the MAC-level header */
static int pt_header (struct sk_buff *skb, struct device *dev, unsigned short type,
                void *daddr, void *saddr, unsigned len)
{
        return ax25_encapsulate(skb, dev, type, daddr, saddr, len);
}
 
 
/* Rebuild the MAC-level header */
static int pt_rebuild_header(void *buff, struct device *dev, unsigned long raddr,
                                struct sk_buff *skb)
{
        return ax25_rebuild_header(buff, dev, raddr, skb);
}
 
 
 
 
 
/*
 * This sets up all the registers in the SCC for the given channel
 * based upon tsync_hwint()
 */
static void scc_init(struct device *dev)
{
    unsigned long flags;
    struct pt_local *lp = (struct pt_local*) dev->priv;
    register int cmd = lp->base + CTL;
    int tc, br;
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: scc_init(): (%d).\n", lp->base & CHANA);
#endif  
    save_flags(flags);
    cli();
 
    /* We may put something here to enable_escc */
 
    if (cmd & CHANA)
    {
        wrtscc(lp->cardbase, cmd, R9, CHRA);            /* Reset channel A */
        wrtscc(lp->cardbase, cmd, R2, 0xff);            /* Initialise interrupt vector */
    } else {
        wrtscc(lp->cardbase, cmd, R9, CHRB);            /* Reset channel B */
    }
 
    /* Deselect all Rx and Tx interrupts */
    wrtscc(lp->cardbase, cmd, R1, 0);
 
    /* Turn off external interrupts (like CTS/CD) */
    wrtscc(lp->cardbase, cmd, R15, 0);
 
    /* X1 clock, SDLC mode */
    wrtscc(lp->cardbase, cmd, R4, SDLC | X1CLK);
 
        /* Preset CRC and set mode */
        if (lp->nrzi)
        {
        /* Preset Tx CRC, put into NRZI mode */
       wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZI);
    } else {
        /* Preset Tx CRC, put into NRZ mode */
       wrtscc(lp->cardbase, cmd, R10, CRCPS);
    }
 
    /* Tx/Rx parameters */
    if (lp->speed)              /* Use internal clocking */
    {
       /* Tx Clk from BRG. Rx Clk form DPLL, TRxC pin outputs DPLL */
       wrtscc(lp->cardbase, cmd, R11, TCBR | RCDPLL | TRxCDP | TRxCOI);
 
    } else {                    /* Use external clocking */
           /* Tx Clk from TRxCL. Rx Clk from RTxCL, TRxC pin if input */
           wrtscc(lp->cardbase, cmd, R11, TCTRxCP | RCRTxCP | TRxCBR);
           wrtscc(lp->cardbase,cmd, R14, 0);     /* wiz1 */
    }
 
    /* Null out SDLC start address */
    wrtscc(lp->cardbase, cmd, R6, 0);
 
    /* SDLC flag */
    wrtscc(lp->cardbase, cmd, R7, FLAG);
 
    /* Setup Tx but don't enable it */
    wrtscc(lp->cardbase, cmd, R5, Tx8 | DTR);
 
    /* Setup Rx */
    wrtscc(lp->cardbase, cmd, R3, AUTO_ENAB | Rx8);
 
    /* Setup the BRG, turn it off first */
    wrtscc(lp->cardbase, cmd, R14, BRSRC);
 
    /* set the 32x time constant for the BRG in Rx mode */
        if (lp->speed)
        {
                br = lp->speed;
                tc = ((lp->xtal / 32) / (br * 2)) - 2;
            wrtscc(lp->cardbase, cmd, R12, tc & 0xff);          /* lower byte */
                wrtscc(lp->cardbase, cmd, R13, (tc >> 8) & 0xff);       /* upper byte */
        }
 
        /* Turn transmitter off, to setup stuff */
        pt_rts(lp, OFF);
 
        /* External clocking */
        if (lp->speed)
        {
                /* DPLL frm BRG, BRG src PCLK */
                wrtscc(lp->cardbase, cmd, R14, BRSRC | SSBR);
                wrtscc(lp->cardbase, cmd, R14, BRSRC | SEARCH); /* SEARCH mode, keep BRG src */
            wrtscc(lp->cardbase, cmd, R14, BRSRC | BRENABL);    /* Enable the BRG */
 
            /* Turn off external clock port */
        if (lp->base & CHANA)
            outb_p( (pt_sercfg &= ~PT_EXTCLKA), (lp->cardbase + SERIAL_CFG) );
        else
            outb_p( (pt_sercfg &= ~PT_EXTCLKB), (lp->cardbase + SERIAL_CFG) );
    } else {
                /* DPLL frm rtxc,BRG src PCLK */
/*              wrtscc(lp->cardbase, cmd, R14, BRSRC | SSRTxC);*/
        /* Turn on external clock port */
        if (lp->base & CHANA)
            outb_p( (pt_sercfg |= PT_EXTCLKA), (lp->cardbase + SERIAL_CFG) );
        else
            outb_p( (pt_sercfg |= PT_EXTCLKB), (lp->cardbase + SERIAL_CFG) );
    }
 
    if (!lp->dmachan)
                wrtscc(lp->cardbase, cmd, R1, (INT_ALL_Rx | EXT_INT_ENAB));
 
    wrtscc(lp->cardbase, cmd, R15, BRKIE);      /* ABORT int */
 
        /* Turn on the DTR to tell modem we're alive */
        if (lp->base & CHANA)
            outb_p( (pt_sercfg |= PT_DTRA_ON), (lp->cardbase + SERIAL_CFG) );
        else
        outb_p( (pt_sercfg |= PT_DTRB_ON), (lp->cardbase + SERIAL_CFG) );
 
    /* Now, turn on the receiver and hunt for a flag */
    wrtscc(lp->cardbase, cmd, R3, RxENABLE | RxCRC_ENAB | AUTO_ENAB | Rx8 );
 
        restore_flags(flags);
 
} /* scc_init() */
 
/* Resets the given channel and whole SCC if both channels off */
static void chipset_init(struct device *dev)
{
 
        struct pt_local *lp = (struct pt_local*) dev->priv;
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: chipset_init(): pt0a tstate = %d.\n", ((struct pt_local*)pt0a.priv)->tstate);
        printk(KERN_DEBUG "PT: chipset_init(): pt0b tstate = %d.\n", ((struct pt_local*)pt0b.priv)->tstate);
#endif
        /* Reset SCC if both channels are to be canned */
        if ( ((lp->base & CHANA) && !(pt_sercfg & PT_DTRB_ON)) ||
                        (!(lp->base & CHANA) && !(pt_sercfg & PT_DTRA_ON)) )
        {
                wrtscc(lp->cardbase, lp->base + CTL, R9, FHWRES);
                /* Reset int and dma registers */
                outb_p((pt_sercfg = 0), lp->cardbase + SERIAL_CFG);
                outb_p((pt_dmacfg = 0), lp->cardbase + DMA_CFG);
#ifdef PT_DEBUG
                printk(KERN_DEBUG "PT: chipset_init() Resetting SCC, called by ch (%d).\n", lp->base & CHANA);
#endif                          
        }
        /* Reset individual channel */
        if (lp->base & CHANA) {
                wrtscc(lp->cardbase, lp->base + CTL, R9, MIE | DLC | NV | CHRA);
                outb_p( (pt_sercfg &= ~PT_DTRA_ON), lp->cardbase + SERIAL_CFG);
        } else {
                wrtscc(lp->cardbase, lp->base + CTL, R9, MIE | DLC | NV | CHRB);
                        outb_p( (pt_sercfg &= ~PT_DTRB_ON), lp->cardbase + SERIAL_CFG);
        }
} /* chipset_init() */
 
 
 
int pt_init(void)
{
    int *port;
    int ioaddr = 0;
    int card_type = 0;
    int ports[] =
    { 0x230, 0x240, 0x250, 0x260, 0x270, 0x280, 0x290, 0x2a0,
      0x2b0, 0x300, 0x330, 0x3f0,  0};
 
    printk(KERN_INFO "PT: 0.41 ALPHA 07 October 1995 Craig Small (vk2xlz@vk2xlz.ampr.org)\n");
 
    for (port = &ports[0]; *port && !card_type; port++) {
        ioaddr = *port;
 
        if (check_region(ioaddr, PT_TOTAL_SIZE) == 0) {
            printk(KERN_INFO "PT: Probing for card at address %#3x\n", ioaddr);
            card_type = hw_probe(ioaddr);
        }
    }
    if (card_type) {
        printk(KERN_INFO "PT: Found a PT at address %#3x\n",ioaddr);
    } else {
        printk(KERN_ERR "PT: ERROR: No card found.\n");
        return -EIO;
    }
 
    /*
     * Link a couple of device structures into the chain
     *
     * For the A port
     * Allocate space for 4 buffers even though we only need 3,
     * because one of them may cross a DMA page boundary and
     * be rejected by get_dma_buffer().
     */
    register_netdev(&pt0a);
 
    pt0a.priv= kmalloc(sizeof(struct pt_local) + (DMA_BUFF_SIZE + sizeof(struct mbuf)) * 4, GFP_KERNEL | GFP_DMA);
 
    pt0a.dma = 0;        /* wizzer - no dma yet */
    pt0a.base_addr = ioaddr + CHANA;
    pt0a.irq = 0;
 
    /* And B port */
    register_netdev(&pt0b);
 
    pt0b.priv= kmalloc(sizeof(struct pt_local) + (DMA_BUFF_SIZE + sizeof(struct mbuf)) * 4, GFP_KERNEL | GFP_DMA);
 
    pt0b.base_addr = ioaddr + CHANB;
    pt0b.irq = 0;
 
    /* Now initialise them */
    pt_probe(&pt0a);
    pt_probe(&pt0b);
 
    pt0b.irq = pt0a.irq;        /* IRQ is shared */
 
    return 0;
} /* pt_init() */
 
/*
 * Probe for PT card.  Also initialises the timers
 */
static int hw_probe(int ioaddr)
{
    int time = 1000;            /* Number of milliseconds to test */
    int a = 1;
    int b = 1;
    unsigned long start_time, end_time;
 
    inb_p(ioaddr + TMR1CLR);
    inb_p(ioaddr + TMR2CLR);
 
    /* Timer counter channel 0, 1mS period */
    outb_p(SC0 | LSB_MSB | MODE3, ioaddr + TMRCMD);
    outb_p(0x00, ioaddr + TMR0);
    outb_p(0x18, ioaddr + TMR0);
 
    /* Setup timer control word for timer 1 */
    outb_p(SC1 | LSB_MSB | MODE0, ioaddr + TMRCMD);
    outb_p((time << 1) & 0xff, ioaddr + TMR1);
    outb_p((time >> 7) & 0xff, ioaddr + TMR1);
 
    /* wait until counter reg is loaded */
    do {
        /* Latch count for reading */
        outb_p(SC1, ioaddr + TMRCMD);
        a = inb_p(ioaddr + TMR1);
        b = inb_p(ioaddr + TMR1);
    } while (b == 0);
    start_time = jiffies;
    while(b != 0)
    {
        /* Latch count for reading */
        outb_p(SC1, ioaddr + TMRCMD);
        a = inb_p(ioaddr + TMR1);
        b = inb_p(ioaddr + TMR1);
        end_time = jiffies;
        /* Don't wait forever - there may be no card here */
        if ((end_time - start_time) > 200)
        {
                inb_p(ioaddr + TMR1CLR);
            return 0;
        }
    }
 
    /* Now fix the timers up for general operation */
 
    /* Clear the timers */
    inb_p(ioaddr + TMR1CLR);
    inb_p(ioaddr + TMR2CLR);
 
    outb_p(SC1 | LSB_MSB | MODE0, ioaddr + TMRCMD);
    inb_p(ioaddr + TMR1CLR);
 
    outb_p(SC2 | LSB_MSB | MODE0, ioaddr + TMRCMD);
    /* Should this be tmr1 or tmr2? wiz3*/
    inb_p(ioaddr + TMR1CLR);
 
    return 1;
} /* hw_probe() */
 
 
static void pt_rts(struct pt_local *lp, int x)
{
        int tc;
        long br;
        int cmd = lp->base + CTL;
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_rts(): Transmitter status will be %d (%d).\n", x, lp->base & CHANA);
#endif                  
        if (x == ON) {
            /* Ex ints off to avoid int */
            wrtscc(lp->cardbase, cmd, R15, 0);
            wrtscc(lp->cardbase, cmd, R3, AUTO_ENAB | Rx8);     /* Rx off */
            lp->rstate = IDLE;
 
            if(lp->dmachan)
            {
                /* Setup for Tx DMA */
                wrtscc(lp->cardbase, cmd, R1, WT_FN_RDYFN | EXT_INT_ENAB);
            } else {
                /* No interrupts */
                wrtscc(lp->cardbase, cmd, R1, 0);
            }
 
            if (!lp->clockmode)
            {
                if (lp->speed)
                {
                    br = lp->speed;
                    tc = (lp->xtal / (br * 2)) - 2;
                    wrtscc(lp->cardbase, cmd, R12, tc & 0xff);
                    wrtscc(lp->cardbase, cmd, R13, (tc >> 8) & 0xff);
                }
            }
            /* Turn on Tx by raising RTS */
            wrtscc(lp->cardbase, cmd, R5, TxCRC_ENAB | RTS | TxENAB | Tx8 | DTR);
            /* Transmitter on now */
        } else {                /* turning off Tx */
            lp->tstate = IDLE;
 
            /* Turn off Tx by dropping RTS */
            wrtscc(lp->cardbase, cmd, R5, Tx8 | DTR);
            if (!lp->clockmode)
            {
                if (lp->speed)          /* internally clocked */
                {
                    /* Reprogram BRG from 32x clock for Rx DPLL */
                    /* BRG off, keep PClk source */
                    wrtscc(lp->cardbase, cmd, R14, BRSRC);
                    br = lp->speed;
                    tc = ((lp->xtal / 32) / (br * 2)) - 2;
                    wrtscc(lp->cardbase, cmd, R12, tc & 0xff);
                    wrtscc(lp->cardbase, cmd, R13, (tc >> 8) & 0xff);
 
                    /* SEARCH mode, BRG source */
                    wrtscc(lp->cardbase, cmd, R14, BRSRC | SEARCH);
                    /* Enable the BRG */
                    wrtscc(lp->cardbase, cmd, R14, BRSRC | BRENABL);
                }
            }
            /* Flush Rx fifo */
            /* Turn Rx off */
            wrtscc(lp->cardbase, cmd, R3, AUTO_ENAB | Rx8);
 
            /* Reset error latch */
            wrtscc(lp->cardbase, cmd, R0, ERR_RES);
 
            /* get status byte from R1 */
            (void) rdscc(lp->cardbase, cmd, R1);
 
            /* Read and dump data in queue */
            (void) rdscc(lp->cardbase, cmd, R8);
            (void) rdscc(lp->cardbase, cmd, R8);
            (void) rdscc(lp->cardbase, cmd, R8);
 
            /* Now, turn on Rx and hunt for a flag */
              wrtscc(lp->cardbase, cmd, R3, RxENABLE | AUTO_ENAB | Rx8 );
 
            lp->rstate = ACTIVE;
 
            if (lp->dmachan)
            {
                setup_rx_dma(lp);
            } else {
                /* Reset buffer pointers */
                lp->rcp = lp->rcvbuf->data;
                lp->rcvbuf->cnt = 0;
                /* Allow aborts to interrupt us */
                wrtscc(lp->cardbase, cmd, R1, INT_ALL_Rx | EXT_INT_ENAB);
 
        }
        wrtscc(lp->cardbase, cmd, R15, BRKIE );
    }
} /* pt_rts() */
 
 
static int valid_dma_page(unsigned long addr, unsigned long dev_bufsize)
{
    if (((addr & 0xffff) + dev_bufsize) <= 0x10000)
        return 1;
    else
        return 0;
}
 
static int pt_set_mac_address(struct device *dev, void *addr)
{
        struct sockaddr *sa = (struct sockaddr *)addr;
        memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);              /* addr is an AX.25 shifted ASCII */
        return 0;                /* mac address */
}
 
 
/* Allocate a buffer which does not cross a DMA page boundary */
static char * get_dma_buffer(unsigned long *mem_ptr)
{
    char *ret;
 
    ret = (char *) *mem_ptr;
 
    if (!valid_dma_page(*mem_ptr, DMA_BUFF_SIZE + sizeof(struct mbuf))) {
        *mem_ptr += (DMA_BUFF_SIZE + sizeof(struct mbuf));
        ret = (char *) *mem_ptr;
    }
    *mem_ptr += (DMA_BUFF_SIZE + sizeof(struct mbuf));
    return (ret);
} /* get_dma_buffer() */
 
 
/*
 * Sets up all the structures for the PT device
 */
static int pt_probe(struct device *dev)
{
    short ioaddr;
    struct pt_local *lp;
    int i;
    unsigned long flags;
    unsigned long mem_ptr;
 
    ioaddr = dev->base_addr;
 
    /*
     * Initialise the device structure.
     * Must be done before chipset_init()
     * Make sure data structures used by  the PT are aligned
     */
    dev->priv = (void *) (((int) dev->priv + 7) & ~7);
    lp = (struct pt_local*) dev->priv;
 
    memset(dev->priv, 0, sizeof(struct pt_local));
 
    /* Allocate some buffers which do not cross DMA boundaries */
    mem_ptr = (unsigned long) dev->priv + sizeof(struct pt_local);
    lp->txdmabuf = get_dma_buffer(&mem_ptr);
    lp->rxdmabuf1 = (struct mbuf *) get_dma_buffer(&mem_ptr);
    lp->rxdmabuf2 = (struct mbuf *) get_dma_buffer(&mem_ptr);
 
    /* Initialise the Rx buffer */
    lp->rcvbuf = lp->rxdmabuf1;
    lp->rcp = lp->rcvbuf->data;
    lp->rcvbuf->cnt = 0;
 
    /* Initialise the transmit queue head structure */
    skb_queue_head_init(&lp->sndq);
 
    lp->base = dev->base_addr;
    lp->cardbase = dev->base_addr & 0x3f0;
 
    /* These need to be initialised before scc_init() is called.
     */
    lp->xtal = XTAL;
 
    if (dev->base_addr & CHANA) {
        lp->speed = DEF_A_SPEED;
        lp->txdelay = DEF_A_TXDELAY;
        lp->persist = DEF_A_PERSIST;
        lp->slotime = DEF_A_SLOTIME;
        lp->squeldelay = DEF_A_SQUELDELAY;
        lp->clockmode = DEF_A_CLOCKMODE;
        lp->nrzi = DEF_A_NRZI;
    } else {
        lp->speed = DEF_B_SPEED;
        lp->txdelay = DEF_B_TXDELAY;
        lp->persist = DEF_B_PERSIST;
        lp->slotime = DEF_B_SLOTIME;
        lp->squeldelay = DEF_B_SQUELDELAY;
        lp->clockmode = DEF_B_CLOCKMODE;
        lp->nrzi = DEF_B_NRZI;
    }
    lp->bufsiz = DMA_BUFF_SIZE;
    lp->tstate = IDLE;
 
    chipset_init(dev);
 
    if (dev->base_addr & CHANA) {
        /* Note that a single IRQ services 2 devices (A and B channels)
        */
 
        /*
         * We disable the dma for a while, we have to get ints working
         * properly first!!
         */
        lp->dmachan = 0;
 
        if (dev->irq < 2) {
            autoirq_setup(0);
 
            /* Turn on PT interrupts */
            save_flags(flags);
            cli();
            outb_p( pt_sercfg |= PT_EI, lp->cardbase + INT_CFG);
            restore_flags(flags);
 
            /* Set a timer interrupt */
            tdelay(lp, 1);
            dev->irq = autoirq_report(20);
 
            /* Turn off PT interrupts */
            save_flags(flags);
            cli();
            outb_p( (pt_sercfg  &= ~ PT_EI), lp->cardbase + INT_CFG);
            restore_flags(flags);
 
            if (!dev->irq) {
                printk(KERN_ERR "PT: ERROR: Failed to detect IRQ line, assuming IRQ7.\n");
            }
        }
 
        printk(KERN_INFO "PT: Autodetected IRQ %d, assuming DMA %d\n", dev->irq, dev->dma);
 
        /* This board has jumpered interrupts. Snarf the interrupt vector
         * now.  There is no point in waiting since no other device can use
         * the interrupt, and this marks the 'irqaction' as busy.
         */
        {
            int irqval = request_irq(dev->irq, &pt_interrupt,0, "pt", NULL);
            if (irqval) {
                printk(KERN_ERR "PT: ERROR: Unable to get IRQ %d (irqval = %d).\n",
                    dev->irq, irqval);
                return EAGAIN;
            }
        }
 
        /* Grab the region */
        request_region(ioaddr & 0x3f0, PT_TOTAL_SIZE, "pt" );
    } /* A port */
    dev->open = pt_open;
    dev->stop = pt_close;
    dev->do_ioctl = pt_ioctl;
    dev->hard_start_xmit = pt_send_packet;
    dev->get_stats = pt_get_stats;
 
    /* Fill in the fields of the device structure */
    for (i=0; i < DEV_NUMBUFFS; i++)
        skb_queue_head_init(&dev->buffs[i]);
 
    dev->hard_header = pt_header;
    dev->rebuild_header = pt_rebuild_header;
    dev->set_mac_address = pt_set_mac_address;
 
    dev->type = ARPHRD_AX25;            /* AF_AX25 device */
    dev->hard_header_len = 73;      /* We do digipeaters now */
    dev->mtu = 1500;                /* eth_mtu is default */
    dev->addr_len = 7;               /* sizeof an ax.25 address */
    memcpy(dev->broadcast, ax25_bcast, 7);
    memcpy(dev->dev_addr, ax25_test, 7);
 
    /* New style flags */
    dev->flags = 0;
    dev->family = AF_INET;
 
#ifdef CONFIG_INET
    dev->pa_addr    = in_aton("192.168.0.1");
    dev->pa_brdaddr = in_aton("192.168.0.255");
    dev->pa_mask    = in_aton("255.255.255.0");
    dev->pa_alen    = 4;
#endif
 
    return 0;
} /* pt_probe() */
 
 
/* Open/initialise the board.  This is called (in the current kernel)
 * sometime after booting when the 'ifconfig' program is run.
 *
 * This routine should set everything up anew at each open, even
 * registers that 'should' only be set once at boot, so that there is
 * a non-reboot way to recover if something goes wrong.
 * derived from last half of tsync_attach()
 */
static int pt_open(struct device *dev)
{
    unsigned long flags;
    struct pt_local *lp = dev->priv;
    static int first_time = 1;
 
    if (dev->base_addr & CHANA)
    {
        if (first_time)
        {
            if (request_dma(dev->dma, "pt"))
            {
                free_irq(dev->irq, NULL);
                return -EAGAIN;
            }
        }
        irq2dev_map[dev->irq] = dev;
 
         /* Reset hardware */
         chipset_init(dev);
     }
     lp->tstate = IDLE;
 
     if (dev->base_addr & CHANA)
     {
         scc_init(dev);
         scc_init(dev->next);
     }
     /* Save a copy of register RR0 for comparing with later on */
     /* We always put 0 in zero count */
     lp->saved_RR0 = rdscc(lp->cardbase, lp->base + CTL, R0) & ~ZCOUNT;
 
    /* master interrupt enable */
    save_flags(flags);
    cli();
    wrtscc(lp->cardbase, lp->base + CTL, R9, MIE | NV);
    outb_p( pt_sercfg |= PT_EI, lp->cardbase + INT_CFG);
    restore_flags(flags);
 
    lp->open_time = jiffies;
 
    dev->tbusy = 0;
    dev->interrupt = 0;
    dev->start = 1;
    first_time = 0;
 
    MOD_INC_USE_COUNT;
 
    return 0;
} /* pt_open() */
 
static int pt_send_packet(struct sk_buff *skb, struct device *dev)
{
        struct pt_local *lp = (struct pt_local *) dev->priv;
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_send_packet(): (%d)\n", lp->base & CHANA);
#endif                  
        /* If some higher layer thinks we've missed an tx-done interrupt
           we are passed NULL. Caution: dev_tint() handles the cli()/sti()
           itself.*/
        if (skb == NULL) {
                dev_tint(dev);
                return 0;
        }
        hardware_send_packet(lp, skb);
        dev->trans_start = jiffies;
 
        return 0;
}
 
 
 
/* The inverse routine to pt_open() */
static int pt_close(struct device *dev)
{
        unsigned long flags;
        struct pt_local *lp = dev->priv;
        struct sk_buff *ptr = NULL;
        int cmd;
 
        cmd = lp->base + CTL;
 
        save_flags(flags);
        cli();
 
        /* Reset SCC or channel */
        chipset_init(dev);
        disable_dma(lp->dmachan);
 
        lp->open_time = 0;
        dev->tbusy = 1;
        dev->start = 0;
 
        /* Free any buffers left in the hardware transmit queue */
        while ((ptr = skb_dequeue(&lp->sndq)) != NULL)
                free_p(ptr);
 
        restore_flags(flags);
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_close(): Closing down channel (%d).\n", lp->base & CHANA);
#endif  
 
        MOD_DEC_USE_COUNT;
 
        return 0;
} /* pt_close() */
 
 
static int pt_ioctl(struct device *dev, struct ifreq *ifr, int cmd)
{
    unsigned long flags;
    struct pt_req rq;
    struct pt_local *lp = (struct pt_local *) dev->priv;
 
    int ret = verify_area(VERIFY_WRITE, ifr->ifr_data, sizeof(struct pt_req));
    if (ret)
        return ret;
 
    if (cmd != SIOCDEVPRIVATE)
        return -EINVAL;
 
    memcpy_fromfs(&rq, ifr->ifr_data, sizeof(struct pt_req));
 
    switch (rq.cmd) {
    case SIOCSPIPARAM:
 
        if (!suser())
            return -EPERM;
        save_flags(flags);
        cli();
        lp->txdelay = rq.txdelay;
        lp->persist = rq.persist;
        lp->slotime = rq.slotime;
        lp->squeldelay = rq.squeldelay;
        lp->clockmode = rq.clockmode;
        lp->speed = rq.speed;
        pt_open(&pt0a);
        restore_flags(flags);
        ret = 0;
        break;
 
    case SIOCSPIDMA:
 
        if (!suser())
            return -EPERM;
        ret = 0;
        if (dev->base_addr & CHANA) {   /* if A channel */
           if (rq.dmachan < 1 || rq.dmachan > 3)
                return -EINVAL;
           save_flags(flags);
           cli();
           pt_close(dev);
           free_dma(lp->dmachan);
           dev->dma = lp->dmachan = rq.dmachan;
           if (request_dma(lp->dmachan,"pt"))
                ret = -EAGAIN;
           pt_open(dev);
           restore_flags(flags);
        }
        break;
 
    case SIOCSPIIRQ:
        ret = -EINVAL;      /* add this later */
        break;
 
    case SIOCGPIPARAM:
    case SIOCGPIDMA:
    case SIOCGPIIRQ:
 
        rq.speed = lp->speed;
        rq.txdelay = lp->txdelay;
        rq.persist = lp->persist;
        rq.slotime = lp->slotime;
        rq.squeldelay = lp->squeldelay;
        rq.clockmode = lp->clockmode;
        rq.dmachan = lp->dmachan;
        rq.irq = dev->irq;
        memcpy_tofs(ifr->ifr_data, &rq, sizeof(struct pt_req));
        ret = 0;
        break;
 
    default:
        ret = -EINVAL;
    }
    return ret;
}
 
/* Get the current statistics.  This may be called with the card open or
   closed. */
static struct netstats *
 pt_get_stats(struct device *dev)
{
    struct pt_local *lp = (struct pt_local *) dev->priv;
 
    return &lp->stats;
}
 
 
/*
 * Local variables:
 *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c skeleton.c"
 *  version-control: t
 *  kept-new-versions: 5
 *  tab-width: 4
 * End:
 */
 
 
static void tdelay(struct pt_local *lp, int time)
{
        /* For some reason, we turn off the Tx interrupts here! */
        if (!lp->dmachan)
                wrtscc(lp->cardbase, lp->base + CTL, R1, INT_ALL_Rx | EXT_INT_ENAB);
 
    if (lp->base & CHANA) {
        outb_p(time & 0xff, lp->cardbase + TMR1);
        outb_p((time >> 8)&0xff, lp->cardbase + TMR1);
    } else {
        outb_p(time & 0xff, lp->cardbase + TMR2);
        outb_p((time >> 8)&0xff, lp->cardbase + TMR2);
    }
} /* tdelay */
 
 
static void pt_txisr(struct pt_local *lp)
{
        unsigned long flags;
        int cmd;
        unsigned char c;
 
        save_flags(flags);
        cli();
        cmd = lp->base + CTL;
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_txisr(): tstate = %d (%d).\n", lp->tstate, lp->base & CHANA);
#endif  
 
        switch (lp->tstate)
        {
        case CRCOUT:
            lp->tstate = FLAGOUT;
            tdelay(lp, lp->squeldelay);
            restore_flags(flags);
            return;
 
        case IDLE:
            /* Transmitter idle. Find a frame for transmission */
            if ((lp->sndbuf = skb_dequeue(&lp->sndq)) == NULL)
            {
                /* Nothing to send - return to receive mode
                 * Tx off now - flag should have gone
                 */
                pt_rts(lp, OFF);
 
                restore_flags(flags);
                return;
            }
            if (!lp->dmachan)
            {
                    lp->txptr = lp->sndbuf->data;
                    lp->txptr++;                /* Ignore KISS control byte */
                    lp->txcnt = (int) lp->sndbuf->len - 1;
                }
            /* If a buffer to send, drop though here */
 
        case DEFER:
            /* Check DCD - debounce it */
            /* See Intel Microcommunications Handbook p2-308 */
            wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT);
            wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT);
            if ((rdscc(lp->cardbase, cmd, R0) & DCD) != 0)
            {
                lp->tstate = DEFER;
                tdelay(lp, 100);
                /* DEFER until DCD transition or timeout */
                wrtscc(lp->cardbase, cmd, R15, DCDIE);
                restore_flags(flags);
                return;
            }
            if (random() > lp->persist)
            {
                lp->tstate = DEFER;
                tdelay(lp, lp->slotime);
                restore_flags(flags);
                return;
            }
            pt_rts(lp, ON);             /* Tx on */
            if (lp->dmachan)
                wrtscc(lp->cardbase, cmd, R5, TxCRC_ENAB | RTS | Tx8);
            lp->tstate = ST_TXDELAY;
            tdelay(lp, lp->txdelay);
            restore_flags(flags);
            return;
 
        case ACTIVE:
            /* Here we are actively sending a frame */
            if (lp->txcnt--)
            {
                /* XLZ - checkout Gracilis PT code to see if the while
                 * loop is better or not.
                 */
                c = *lp->txptr++;
                /* next char is gone */
                wrtscc(lp->cardbase, cmd, R8, c);
                /* stuffing a char satisfies interrupt condition */
            } else {
                /* No more to send */
                free_p(lp->sndbuf);
                lp->sndbuf = NULL;
                if ((rdscc(lp->cardbase, cmd, R0) & TxEOM))
                {
                    /* Did we underrun */
                    lp->stats.tx_errors++;
                    lp->stats.tx_fifo_errors++;
                    wrtscc(lp->cardbase, cmd, R0, SEND_ABORT);
                    lp->tstate = FLAGOUT;
                    tdelay(lp, lp->squeldelay);
                    restore_flags(flags);
                    return;
                }
                lp->tstate = UNDERRUN;
                /* Send flags on underrun */
               if (lp->nrzi)
               {
                   wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZI);
               } else {
                   wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZ);
               }
               /* Reset Tx interrupt pending */
               wrtscc(lp->cardbase, cmd, R0, RES_Tx_P);
           }
           restore_flags(flags);
           return;
        default:
                printk(KERN_ERR "PT: pt_txisr(): Invalid tstate (%d) for chan %s.\n", lp->tstate, (cmd & CHANA? "A": "B") );
                pt_rts(lp, OFF);
                lp->tstate = IDLE;
                break;
    }                           /*switch */
    restore_flags(flags);
}
 
static void pt_rxisr(struct device *dev)
{
    struct pt_local *lp = (struct pt_local*) dev->priv;
    int cmd = lp->base + CTL;
    int bytecount;
    unsigned long flags;
    char rse;
    struct sk_buff *skb;
    int sksize, pkt_len;
    struct mbuf *cur_buf = NULL;
    unsigned char *cfix;
 
    save_flags(flags);
    cli();
 
    /* Get status byte from R1 */
    rse = rdscc(lp->cardbase, cmd, R1);
 
#ifdef PT_DEBUG
    printk(KERN_DEBUG "PT: pt_rxisr(): R1 = %#3x. (%d)\n", rse, lp->base & CHANA);
#endif        
 
        if (lp->dmachan && (rse & Rx_OVR))
                lp->rstate = RXERROR;
 
    if (rdscc(lp->cardbase, cmd, R0) & Rx_CH_AV && !lp->dmachan)
    {
        /* There is a char to be stored
         * Read special condition bits before reading the data char
         */
        if (rse & Rx_OVR)
        {
             /* Rx overrun - toss buffer */
             /* wind back the pointers */
             lp->rcp = lp->rcvbuf->data;
             lp->rcvbuf->cnt = 0;
             lp->rstate = RXERROR;
             lp->stats.rx_errors++;
             lp->stats.rx_fifo_errors++;
         } else if (lp->rcvbuf->cnt >= lp->bufsiz)
             {
                 /* Too large packet
                  * wind back Rx buffer pointers
                  */
                 lp->rcp = lp->rcvbuf->data;
                 lp->rcvbuf->cnt = 0;
                 lp->rstate = TOOBIG;
             }
         /* ok, we can store the Rx char if no errors */
         if (lp->rstate == ACTIVE)
         {
             *lp->rcp++ = rdscc(lp->cardbase, cmd, R8);
             lp->rcvbuf->cnt++;
         } else {
             /* we got an error, dump the FIFO */
             (void) rdscc(lp->cardbase, cmd, R8);
             (void) rdscc(lp->cardbase, cmd, R8);
             (void) rdscc(lp->cardbase, cmd, R8);
 
             /* Reset error latch */
             wrtscc(lp->cardbase, cmd, R0, ERR_RES);
             lp->rstate = ACTIVE;
 
             /* Resync the SCC */
             wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8);
 
         }
     }
 
     if (rse & END_FR)
     {
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_rxisr() Got end of a %u byte frame.\n", lp->rcvbuf->cnt);
#endif       
                if (lp->dmachan)
                {
                        clear_dma_ff(lp->dmachan);
                        bytecount = lp->bufsiz - get_dma_residue(lp->dmachan);
                } else {
                        bytecount = lp->rcvbuf->cnt;
                }
 
         /* END OF FRAME - Make sure Rx was active */
         if (lp->rcvbuf->cnt > 0 || lp->dmachan)
         {
             if ((rse & CRC_ERR) || (lp->rstate > ACTIVE) || (bytecount < 10))
             {
                 if ((bytecount >= 10) && (rse & CRC_ERR))
                 {
                     lp->stats.rx_crc_errors++;
                 }
                 if (lp->dmachan)
                 {
                        if (lp->rstate == RXERROR)
                        {
                                lp->stats.rx_errors++;
                                lp->stats.rx_over_errors++;
                        }
                        lp->rstate = ACTIVE;
                        setup_rx_dma(lp);
                 } else {
                         /* wind back Rx buffer pointers */
                     lp->rcp = lp->rcvbuf->data;
                         lp->rcvbuf->cnt = 0;
 
                                        /* Re-sync the SCC */
                                        wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8);
 
                     }
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_rxisr() %s error.\n", (rse & CRC_ERR)? "CRC" : "state");
#endif                 
             } else {
                 /* We have a valid frame */
                 if (lp->dmachan)
                 {
                        pkt_len = lp->rcvbuf->cnt = bytecount - 2 +1;
                                        /* Get buffer for next frame */
                        cur_buf = lp->rcvbuf;
                        switchbuffers(lp);
                        setup_rx_dma(lp);
                 } else {
                         pkt_len = lp->rcvbuf->cnt -= 2;  /* Toss 2 CRC bytes */
                     pkt_len += 1;      /* make room for KISS control byte */
                        }
 
                 /* Malloc up new buffer */
                 sksize = pkt_len;
                 skb = dev_alloc_skb(sksize);
                 if (skb == NULL)
                 {
                     printk(KERN_ERR "PT: %s: Memory squeeze, dropping packet.\n", dev->name);
                     lp->stats.rx_dropped++;
                     restore_flags(flags);
                     return;
                 }
                 skb->dev = dev;
 
                 /* KISS kludge = prefix with a 0 byte */
                 cfix=skb_put(skb,pkt_len);
                 *cfix++=0;
                 /* skb->data points to the start of sk_buff area */
                 if (lp->dmachan)
                        memcpy(cfix, (char*)cur_buf->data, pkt_len - 1);
                 else
                    memcpy(cfix, lp->rcvbuf->data, pkt_len - 1);
                 skb->protocol = ntohs(ETH_P_AX25);
                 skb->mac.raw=skb->data;
                 IS_SKB(skb);
                 netif_rx(skb);
                 lp->stats.rx_packets++;
                 if (!lp->dmachan)
                 {
                         /* packet queued - wind back buffer for next frame */
                     lp->rcp = lp->rcvbuf->data;
                         lp->rcvbuf->cnt = 0;
                     }
             } /* good frame */
         } /* check active Rx */
         /* Clear error status */
         lp->rstate = ACTIVE;
         /* Reset error latch */
     } /* end EOF check */
     wrtscc(lp->cardbase, cmd, R0, ERR_RES);
     restore_flags(flags);
} /* pt_rxisr() */
 
/*
 * This handles the two timer interrupts.
 * This is a real bugger, cause you have to rip it out of the pi's
 * external status code.  They use the CTS line or something.
 */
static void pt_tmrisr(struct pt_local *lp)
{
    unsigned long flags;
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: pt_tmrisr(): tstate = %d (%d).\n", lp->tstate, lp->base & CHANA);
#endif          
 
    save_flags(flags);
    cli();
 
 
    switch (lp->tstate)
    {
    /* Most of this stuff is in pt_exisr() */
    case FLAGOUT:
    case ST_TXDELAY:
    case DEFER:
/*    case ACTIVE:
    case UNDERRUN:*/
        pt_exisr(lp);
        break;
 
    default:
        if (lp->base & CHANA)
            printk(KERN_ERR "PT: pt_tmrisr(): Invalid tstate %d for Channel A\n", lp->tstate);
        else
            printk(KERN_ERR "PT: pt_tmrisr(): Invalid tstate %d for Channel B\n", lp->tstate);
        break;
    } /* end switch */
    restore_flags(flags);
} /* pt_tmrisr() */
 
 
/*
 * This routine is called by the kernel when there is an interrupt for the
 * PT.
 */
static void pt_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
    /* It's a tad dodgy here, but we assume pt0a until proven otherwise */
    struct device *dev = &pt0a;
    struct pt_local *lp = dev->priv;
    unsigned char intreg;
    unsigned char st;
    register int cbase = dev->base_addr & 0x3f0;
    unsigned long flags;
 
    /* Read the PT's interrupt register, this is not the SCC one! */
    intreg = inb_p(cbase + INT_REG);
    while(( intreg & 0x07) != 0x07) {
        /* Read interrupt register pending from Channel A */
        while ((st = rdscc(cbase, cbase + CHANA + CTL, R3)) != 0)
        {
                /* Read interrupt vector from R2, channel B */
#ifdef PT_DEBUG
                printk(KERN_DEBUG "PT: pt_interrupt(): R3 = %#3x", st);
#endif                  
/*              st = rdscc(lp->cardbase, cbase + CHANB + CTL, R2) & 0x0e;*/
#ifdef PT_DEBUG
                printk(KERN_DEBUG "PI: R2 = %#3x.\n", st);
#endif  
                        if (st & CHARxIP) {
                            /* Channel A Rx */
                    lp = (struct pt_local*)pt0a.priv;
                    pt_rxisr(&pt0a);
                } else if (st & CHATxIP) {
                    /* Channel A Tx */
                    lp = (struct pt_local*)pt0a.priv;
                    pt_txisr(lp);
                } else if (st & CHAEXT) {
                        /* Channel A External Status */
                        lp = (struct pt_local*)pt0a.priv;
                        pt_exisr(lp);
                } else if (st & CHBRxIP) {
                        /* Channel B Rx */
                    lp= (struct pt_local*)pt0b.priv;
                    pt_rxisr(&pt0b);
                } else if (st & CHBTxIP) {
                /* Channel B Tx */
                    lp = (struct pt_local*)pt0b.priv;
                    pt_txisr(lp);
                        } else if (st & CHBEXT) {
                        /* Channel B External Status */
                        lp = (struct pt_local*)pt0b.priv;
                        pt_exisr(lp);
                }
            /* Reset highest interrupt under service */
            save_flags(flags);
            cli();
            wrtscc(lp->cardbase, lp->base + CTL, R0, RES_H_IUS);
            restore_flags(flags);
        }  /* end of SCC ints */
 
        if (!(intreg & PT_TMR1_MSK))
        {
            /* Clear timer 1 */
            inb_p(cbase + TMR1CLR);
 
            pt_tmrisr( (struct pt_local*)pt0a.priv);
        }
 
        if (!(intreg & PT_TMR2_MSK))
        {
            /* Clear timer 2 */
            inb_p(cbase + TMR2CLR);
 
            pt_tmrisr( (struct pt_local*)pt0b.priv);
        }
 
        /* Get the next PT interrupt vector */
        intreg = inb_p(cbase + INT_REG);
    } /* while (intreg) */
} /* pt_interrupt() */
 
 
static void pt_exisr(struct pt_local *lp)
{
    unsigned long flags;
    int cmd = lp->base + CTL;
    unsigned char st;
    char c;
    int length;
 
    save_flags(flags);
    cli();
 
    /* Get external status */
    st = rdscc(lp->cardbase, cmd, R0);
 
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: exisr(): R0 = %#3x tstate = %d (%d).\n", st, lp->tstate, lp->base & CHANA);
#endif  
    /* Reset external status latch */
    wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT);
 
    if ((lp->rstate >= ACTIVE) && (st & BRK_ABRT) && lp->dmachan)
    {
        setup_rx_dma(lp);
        lp->rstate = ACTIVE;
    }
 
    switch (lp->tstate)
    {
    case ACTIVE:                /* Unexpected underrun */
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: exisr(): unexpected underrun detected.\n");
#endif      
        free_p(lp->sndbuf);
        lp->sndbuf = NULL;
        if (!lp->dmachan)
        {
                wrtscc(lp->cardbase, cmd, R0, SEND_ABORT);
                lp->stats.tx_errors++;
                lp->stats.tx_fifo_errors++;
            }
        lp->tstate = FLAGOUT;
        tdelay(lp, lp->squeldelay);
        restore_flags(flags);
        return;
    case UNDERRUN:
        lp->tstate = CRCOUT;
        restore_flags(flags);
        return;
    case FLAGOUT:
        /* squeldelay has timed out */
        /* Find a frame for transmission */
        if ((lp->sndbuf = skb_dequeue(&lp->sndq)) == NULL)
        {
            /* Nothing to send - return to Rx mode */
            pt_rts(lp, OFF);
            lp->tstate = IDLE;
            restore_flags(flags);
            return;
        }
        if (!lp->dmachan)
        {
                lp->txptr = lp->sndbuf->data;
            lp->txptr++;                /* Ignore KISS control byte */
                lp->txcnt = (int) lp->sndbuf->len - 1;
            }
        /* Fall through if we have a packet */
 
    case ST_TXDELAY:
        if (lp->dmachan)
        {
                /* Disable DMA chan */
                disable_dma(lp->dmachan);
 
                /* Set up for TX dma */
                wrtscc(lp->cardbase, cmd, R1, WT_FN_RDYFN | EXT_INT_ENAB);
 
                length = lp->sndbuf->len - 1;
                memcpy(lp->txdmabuf, &lp->sndbuf->data[1], length);
 
                /* Setup DMA controller for Tx */
                setup_tx_dma(lp, length);
 
                enable_dma(lp->dmachan);
 
                /* Reset CRC, Txint pending */
                wrtscc(lp->cardbase, cmd, R0, RES_Tx_CRC | RES_Tx_P);
 
                /* Allow underrun only */
                wrtscc(lp->cardbase, cmd, R15, TxUIE);
 
                /* Enable TX DMA */
                wrtscc(lp->cardbase, cmd, R1, WT_RDY_ENAB | WT_FN_RDYFN | EXT_INT_ENAB);
 
                /* Send CRC on underrun */
                wrtscc(lp->cardbase, cmd, R0, RES_EOM_L);
 
                lp->tstate = ACTIVE;
                break;
        }
        /* Get first char to send */
        lp->txcnt--;
        c = *lp->txptr++;
        /* Reset CRC for next frame */
        wrtscc(lp->cardbase, cmd, R0, RES_Tx_CRC);
 
        /* send abort on underrun */
        if (lp->nrzi)
        {
            wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZI | ABUNDER);
        } else {
            wrtscc(lp->cardbase, cmd, R10, CRCPS | NRZ | ABUNDER);
        }
        /* send first char */
        wrtscc(lp->cardbase, cmd, R8, c);
 
        /* Reset end of message latch */
        wrtscc(lp->cardbase, cmd, R0, RES_EOM_L);
 
        /* stuff an extra one in */
/*        while ((rdscc(lp->cardbase, cmd, R0) & Tx_BUF_EMP) && lp->txcnt)
        {
            lp->txcnt--;
            c = *lp->txptr++;
            wrtscc(lp->cardbase, cmd, R8, c);
        }*/
 
        /* select Tx interrupts to enable */
        /* Allow underrun int only */
        wrtscc(lp->cardbase, cmd, R15, TxUIE);
 
        /* Reset external interrupts */
        wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT);
 
        /* Tx and Rx ints enabled */
        wrtscc(lp->cardbase, cmd, R1, TxINT_ENAB | EXT_INT_ENAB);
 
        lp->tstate = ACTIVE;
        restore_flags(flags);
        return;
 
        /* slotime has timed out */
    case DEFER:
        /* Check DCD - debounce it
         * see Intel Microcommunications Handbook, p2-308
         */
        wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT);
        wrtscc(lp->cardbase, cmd, R0, RES_EXT_INT);
        if ((rdscc(lp->cardbase, cmd, R0) & DCD) != 0)
        {
            lp->tstate = DEFER;
            tdelay(lp, 100);
            /* DEFER until DCD transition or timeout */
            wrtscc(lp->cardbase, cmd, R15, DCDIE);
            restore_flags(flags);
            return;
        }
        if (random() > lp->persist)
        {
            lp->tstate = DEFER;
            tdelay(lp, lp->slotime);
            restore_flags(flags);
            return;
        }
        if (lp->dmachan)
                wrtscc(lp->cardbase, cmd, R5, TxCRC_ENAB | RTS | Tx8);
        pt_rts(lp, ON);                 /* Tx on */
        lp->tstate = ST_TXDELAY;
        tdelay(lp, lp->txdelay);
        restore_flags(flags);
        return;
 
        /* Only for int driven parts */
        if (lp->dmachan)
        {
                restore_flags(flags);
                return;
        }
 
    } /* end switch */
    /*
     * Rx mode only
     * This triggers when hunt mode is entered, & since an ABORT
     * automatically enters hunt mode, we use that to clean up
     * any waiting garbage
     */
    if ((lp->rstate == ACTIVE) && (st & BRK_ABRT) )
    {
#ifdef PT_DEBUG
        printk(KERN_DEBUG "PT: exisr(): abort detected.\n");
#endif        
                /* read and dump all of SCC Rx FIFO */
        (void) rdscc(lp->cardbase, cmd, R8);
        (void) rdscc(lp->cardbase, cmd, R8);
        (void) rdscc(lp->cardbase, cmd, R8);
 
        lp->rcp = lp->rcvbuf->data;
        lp->rcvbuf->cnt = 0;
 
                /* Re-sync the SCC */
                wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8);
 
    }
 
    /* Check for DCD transitions */
    if ( (st & DCD) != (lp->saved_RR0 & DCD))
    {
#ifdef PT_DEBUG    
        printk(KERN_DEBUG "PT: pt_exisr(): DCD is now %s.\n", (st & DCD)? "ON" : "OFF" );
#endif
                if (st & DCD)
                {
                        /* Check that we don't already have some data */
                        if (lp->rcvbuf->cnt > 0)
                        {
#ifdef PT_DEBUG
                                printk(KERN_DEBUG "PT: pt_exisr() dumping %u bytes from buffer.\n", lp->rcvbuf->cnt);
#endif                                  
                                /* wind back buffers */
                                lp->rcp = lp->rcvbuf->data;
                                lp->rcvbuf->cnt = 0;
                        }
                } else {  /* DCD off */
 
                        /* read and dump al SCC FIFO */
                        (void)rdscc(lp->cardbase, cmd, R8);
                        (void)rdscc(lp->cardbase, cmd, R8);
                        (void)rdscc(lp->cardbase, cmd, R8);
 
                        /* wind back buffers */
                        lp->rcp = lp->rcvbuf->data;
                        lp->rcvbuf->cnt = 0;
 
                        /* Re-sync the SCC */
                        wrtscc(lp->cardbase, cmd, R3, RxENABLE | ENT_HM | AUTO_ENAB | Rx8);
                }
 
    }
    /* Update the saved version of register RR) */
    lp->saved_RR0 = st &~ ZCOUNT;
    restore_flags(flags);
 
} /* pt_exisr() */
 
#ifdef MODULE
int init_module(void)
{
    register_symtab(NULL);
    return pt_init();
}
 
void cleanup_module(void)
{
    free_irq(pt0a.irq, NULL);   /* IRQs and IO Ports are shared */
    release_region(pt0a.base_addr & 0x3f0, PT_TOTAL_SIZE);
    irq2dev_map[pt0a.irq] = NULL;
 
    kfree(pt0a.priv);
    pt0a.priv = NULL;
    unregister_netdev(&pt0a);
 
    kfree(pt0b.priv);
    pt0b.priv = NULL;
    unregister_netdev(&pt0b);
}
#endif
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [net/] [pt.c] - Blame information for rev 1777

Line No.	Rev	Author	Line
1	1626	jcastillo	`#undef PT_DEBUG 1`
2			`/*`
3			`* pt.c: Linux device driver for the Gracilis PackeTwin.`
4			`* Copyright (c) 1995 Craig Small VK2XLZ (vk2xlz@vk2xlz.ampr.org.)`
5			`*`
6			`* This program is free software; you can redistribute it and/or modify`
7			`* it under the terms of the GNU General Public License version 2, as`
8			`* published by the Free Software Foundation.`
9			`*`
10			`* This program is distributed in the hope that it will be useful, but`
11			`* WITHOUT ANY WARRANTY; without even the implied warranty of`
12			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU`
13			`* General Public License for more details.`
14			`*`
15			`* You should have received a copy of the GNU General Public License`
16			`* along with this program; if not, write to the Free Software Foundation,`
17			`* Inc., 675 Mass Ave, Cambridge MA 02139, USA.`
18			`*`
19			`* This driver is largely based upon the PI driver by David Perry.`
20			`*`
21			`* Revision History`
22			`* 23/02/95 cs Started again on driver, last one scrapped`
23			`* 27/02/95 cs Program works, we have chan A only. Tx stays on`
24			`* 28/02/95 cs Fix Tx problem (& TxUIE instead of \| )`
25			`* Fix Chan B Tx timer problem, used TMR2 instead of TMR1`
26			`* 03/03/95 cs Painfully found out (after 3 days) SERIAL_CFG is write only`
27			`* created image of it and DMA_CFG`
28			`* 21/06/95 cs Upgraded to suit PI driver 0.8 ALPHA`
29			`* 22/08/95 cs Changed it all around to make it like pi driver`
30			`* 23/08/95 cs It now works, got caught again by TMR2 and we must have`
31			`* auto-enables for daughter boards.`
32			`* 07/10/95 cs Fixed for 1.3.30 (hopefully)`
33			`* 26/11/95 cs Fixed for 1.3.43, ala 29/10 for pi2.c by ac`
34			`* 21/12/95 cs Got rid of those nasty warnings when compiling, for 1.3.48`
35			`* 08/08/96 jsn Convert to use as a module. Removed send_kiss, empty_scc and`
36			`* pt_loopback functions - they were unused.`
37			`*/`
38
39			`/*`
40			`* default configuration of the PackeTwin,`