OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [net/] [soundmodem/] [sm.c] - Blame information for rev 1777

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 1626 jcastillo 
/*****************************************************************************/
2 
 
3 
/*
4 
 *      sm.c  -- soundcard radio modem driver.
5 
 *
6 
 *      Copyright (C) 1996-1998  Thomas Sailer (sailer@ife.ee.ethz.ch)
7 
 *
8 
 *      This program is free software; you can redistribute it and/or modify
9 
 *      it under the terms of the GNU General Public License as published by
10 
 *      the Free Software Foundation; either version 2 of the License, or
11 
 *      (at your option) any later version.
12 
 *
13 
 *      This program is distributed in the hope that it will be useful,
14 
 *      but WITHOUT ANY WARRANTY; without even the implied warranty of
15 
 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 
 *      GNU General Public License for more details.
17 
 *
18 
 *      You should have received a copy of the GNU General Public License
19 
 *      along with this program; if not, write to the Free Software
20 
 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 
 *
22 
 *  Please note that the GPL allows you to use the driver, NOT the radio.
23 
 *  In order to use the radio, you need a license from the communications
24 
 *  authority of your country.
25 
 *
26 
 *
27 
 *  Command line options (insmod command line)
28 
 *
29 
 *  mode     mode string; eg. "wss:afsk1200"
30 
 *  iobase   base address of the soundcard; common values are 0x220 for sbc,
31 
 *           0x530 for wss
32 
 *  irq      interrupt number; common values are 7 or 5 for sbc, 11 for wss
33 
 *  dma      dma number; common values are 0 or 1
34 
 *
35 
 *
36 
 *  History:
37 
 *   0.1  21.09.96  Started
38 
 *        18.10.96  Changed to new user space access routines (copy_{to,from}_user)
39 
 *   0.4  21.01.97  Separately compileable soundcard/modem modules
40 
 *   0.5  03.03.97  fixed LPT probing (check_lpt result was interpreted the wrong way round)
41 
 *   0.6  16.04.97  init code/data tagged
42 
 *   0.7  30.07.97  fixed halfduplex interrupt handlers/hotfix for CS423X
43 
 *   0.8  14.04.98  cleanups
44 
 */
45 
 
46 
/*****************************************************************************/
47 
 
48 
#include <linux/config.h>
49 
#include <linux/module.h>
50 
#include <linux/ptrace.h>
51 
#include <linux/types.h>
52 
#include <linux/fcntl.h>
53 
#include <linux/ioport.h>
54 
#include <linux/net.h>
55 
#include <linux/in.h>
56 
#include <linux/string.h>
57 
#include <asm/system.h>
58 
#include <asm/io.h>
59 
#include <asm/bitops.h>
60 
#include <linux/delay.h>
61 
#include <linux/errno.h>
62 
#include "sm.h"
63 
 
64 
/* --------------------------------------------------------------------- */
65 
 
66 
/*
67 
 * currently this module is supposed to support both module styles, i.e.
68 
 * the old one present up to about 2.1.9, and the new one functioning
69 
 * starting with 2.1.21. The reason is I have a kit allowing to compile
70 
 * this module also under 2.0.x which was requested by several people.
71 
 * This will go in 2.2
72 
 */
73 
#include <linux/version.h>
74 
 
75 
#if LINUX_VERSION_CODE >= 0x20100
76 
#include <asm/uaccess.h>
77 
#else
78 
#include <asm/segment.h>
79 
#include <linux/mm.h>
80 
 
81 
#undef put_user
82 
#undef get_user
83 
 
84 
#define put_user(x,ptr) ({ __put_user((unsigned long)(x),(ptr),sizeof(*(ptr))); 0; })
85 
#define get_user(x,ptr) ({ x = ((__typeof__(*(ptr)))__get_user((ptr),sizeof(*(ptr)))); 0; })
86 
 
87 
extern inline int copy_from_user(void *to, const void *from, unsigned long n)
88 
{
89 
        int i = verify_area(VERIFY_READ, from, n);
90 
        if (i)
91 
                return i;
92 
        memcpy_fromfs(to, from, n);
93 
        return 0;
94 
}
95 
 
96 
extern inline int copy_to_user(void *to, const void *from, unsigned long n)
97 
{
98 
        int i = verify_area(VERIFY_WRITE, to, n);
99 
        if (i)
100 
                return i;
101 
        memcpy_tofs(to, from, n);
102 
        return 0;
103 
}
104 
#endif
105 
 
106 
#if LINUX_VERSION_CODE >= 0x20123
107 
#include <linux/init.h>
108 
#else
109 
#define __init
110 
#define __initdata
111 
#define __initfunc(x) x
112 
#endif
113 
 
114 
/* --------------------------------------------------------------------- */
115 
 
116 
/*static*/ const char sm_drvname[] = "soundmodem";
117 
static const char sm_drvinfo[] = KERN_INFO "soundmodem: (C) 1996-1998 Thomas Sailer, HB9JNX/AE4WA\n"
118 
KERN_INFO "soundmodem: version 0.8 compiled " __TIME__ " " __DATE__ "\n";
119 
 
120 
/* --------------------------------------------------------------------- */
121 
 
122 
/*static*/ const struct modem_tx_info *sm_modem_tx_table[] = {
123 
#ifdef CONFIG_SOUNDMODEM_AFSK1200
124 
        &sm_afsk1200_tx,
125 
#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
126 
#ifdef CONFIG_SOUNDMODEM_AFSK2400_7
127 
        &sm_afsk2400_7_tx,
128 
#endif /* CONFIG_SOUNDMODEM_AFSK2400_7 */
129 
#ifdef CONFIG_SOUNDMODEM_AFSK2400_8
130 
        &sm_afsk2400_8_tx,
131 
#endif /* CONFIG_SOUNDMODEM_AFSK2400_8 */
132 
#ifdef CONFIG_SOUNDMODEM_AFSK2666
133 
        &sm_afsk2666_tx,
134 
#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
135 
#ifdef CONFIG_SOUNDMODEM_PSK4800
136 
        &sm_psk4800_tx,
137 
#endif /* CONFIG_SOUNDMODEM_PSK4800 */
138 
#ifdef CONFIG_SOUNDMODEM_HAPN4800
139 
        &sm_hapn4800_8_tx,
140 
        &sm_hapn4800_10_tx,
141 
        &sm_hapn4800_pm8_tx,
142 
        &sm_hapn4800_pm10_tx,
143 
#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
144 
#ifdef CONFIG_SOUNDMODEM_FSK9600
145 
        &sm_fsk9600_4_tx,
146 
        &sm_fsk9600_5_tx,
147 
#endif /* CONFIG_SOUNDMODEM_FSK9600 */
148 
        NULL
149 
};
150 
 
151 
/*static*/ const struct modem_rx_info *sm_modem_rx_table[] = {
152 
#ifdef CONFIG_SOUNDMODEM_AFSK1200
153 
        &sm_afsk1200_rx,
154 
#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
155 
#ifdef CONFIG_SOUNDMODEM_AFSK2400_7
156 
        &sm_afsk2400_7_rx,
157 
#endif /* CONFIG_SOUNDMODEM_AFSK2400_7 */
158 
#ifdef CONFIG_SOUNDMODEM_AFSK2400_8
159 
        &sm_afsk2400_8_rx,
160 
#endif /* CONFIG_SOUNDMODEM_AFSK2400_8 */
161 
#ifdef CONFIG_SOUNDMODEM_AFSK2666
162 
        &sm_afsk2666_rx,
163 
#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
164 
#ifdef CONFIG_SOUNDMODEM_PSK4800
165 
        &sm_psk4800_rx,
166 
#endif /* CONFIG_SOUNDMODEM_PSK4800 */
167 
#ifdef CONFIG_SOUNDMODEM_HAPN4800
168 
        &sm_hapn4800_8_rx,
169 
        &sm_hapn4800_10_rx,
170 
        &sm_hapn4800_pm8_rx,
171 
        &sm_hapn4800_pm10_rx,
172 
#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
173 
#ifdef CONFIG_SOUNDMODEM_FSK9600
174 
        &sm_fsk9600_4_rx,
175 
        &sm_fsk9600_5_rx,
176 
#endif /* CONFIG_SOUNDMODEM_FSK9600 */
177 
        NULL
178 
};
179 
 
180 
static const struct hardware_info *sm_hardware_table[] = {
181 
#ifdef CONFIG_SOUNDMODEM_SBC
182 
        &sm_hw_sbc,
183 
        &sm_hw_sbcfdx,
184 
#endif /* CONFIG_SOUNDMODEM_SBC */
185 
#ifdef CONFIG_SOUNDMODEM_WSS
186 
        &sm_hw_wss,
187 
        &sm_hw_wssfdx,
188 
#endif /* CONFIG_SOUNDMODEM_WSS */
189 
        NULL
190 
};
191 
 
192 
/* --------------------------------------------------------------------- */
193 
 
194 
#define NR_PORTS 4
195 
 
196 
/* --------------------------------------------------------------------- */
197 
 
198 
static struct device sm_device[NR_PORTS];
199 
 
200 
static struct {
201 
        char *mode;
202 
        int iobase, irq, dma, dma2, seriobase, pariobase, midiiobase;
203 
} sm_ports[NR_PORTS] = {
204 
        { NULL, -1, 0, 0, 0, -1, -1, -1 },
205 
};
206 
 
207 
/* --------------------------------------------------------------------- */
208 
 
209 
#define UART_RBR(iobase) (iobase+0)
210 
#define UART_THR(iobase) (iobase+0)
211 
#define UART_IER(iobase) (iobase+1)
212 
#define UART_IIR(iobase) (iobase+2)
213 
#define UART_FCR(iobase) (iobase+2)
214 
#define UART_LCR(iobase) (iobase+3)
215 
#define UART_MCR(iobase) (iobase+4)
216 
#define UART_LSR(iobase) (iobase+5)
217 
#define UART_MSR(iobase) (iobase+6)
218 
#define UART_SCR(iobase) (iobase+7)
219 
#define UART_DLL(iobase) (iobase+0)
220 
#define UART_DLM(iobase) (iobase+1)
221 
 
222 
#define SER_EXTENT 8
223 
 
224 
#define LPT_DATA(iobase)    (iobase+0)
225 
#define LPT_STATUS(iobase)  (iobase+1)
226 
#define LPT_CONTROL(iobase) (iobase+2)
227 
#define LPT_IRQ_ENABLE      0x10
228 
 
229 
#define LPT_EXTENT 3
230 
 
231 
#define MIDI_DATA(iobase)     (iobase)
232 
#define MIDI_STATUS(iobase)   (iobase+1)
233 
#define MIDI_READ_FULL 0x80   /* attention: negative logic!! */
234 
#define MIDI_WRITE_EMPTY 0x40 /* attention: negative logic!! */
235 
 
236 
#define MIDI_EXTENT 2
237 
 
238 
/* ---------------------------------------------------------------------- */
239 
 
240 
#define PARAM_TXDELAY   1
241 
#define PARAM_PERSIST   2
242 
#define PARAM_SLOTTIME  3
243 
#define PARAM_TXTAIL    4
244 
#define PARAM_FULLDUP   5
245 
#define PARAM_HARDWARE  6
246 
#define PARAM_RETURN    255
247 
 
248 
#define SP_SER  1
249 
#define SP_PAR  2
250 
#define SP_MIDI 4
251 
 
252 
/* --------------------------------------------------------------------- */
253 
/*
254 
 * ===================== port checking routines ========================
255 
 */
256 
 
257 
/*
258 
 * returns 0 if ok and != 0 on error;
259 
 * the same behaviour as par96_check_lpt in baycom.c
260 
 */
261 
 
262 
/*
263 
 * returns 0 if ok and != 0 on error;
264 
 * the same behaviour as par96_check_lpt in baycom.c
265 
 */
266 
 
267 
static int check_lpt(unsigned int iobase)
268 
{
269 
        unsigned char b1,b2;
270 
        int i;
271 
 
272 
        if (iobase <= 0 || iobase > 0x1000-LPT_EXTENT)
273 
                return 0;
274 
        if (check_region(iobase, LPT_EXTENT))
275 
                return 0;
276 
        b1 = inb(LPT_DATA(iobase));
277 
        b2 = inb(LPT_CONTROL(iobase));
278 
        outb(0xaa, LPT_DATA(iobase));
279 
        i = inb(LPT_DATA(iobase)) == 0xaa;
280 
        outb(0x55, LPT_DATA(iobase));
281 
        i &= inb(LPT_DATA(iobase)) == 0x55;
282 
        outb(0x0a, LPT_CONTROL(iobase));
283 
        i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x0a;
284 
        outb(0x05, LPT_CONTROL(iobase));
285 
        i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x05;
286 
        outb(b1, LPT_DATA(iobase));
287 
        outb(b2, LPT_CONTROL(iobase));
288 
        return !i;
289 
}
290 
 
291 
/* --------------------------------------------------------------------- */
292 
 
293 
enum uart { c_uart_unknown, c_uart_8250,
294 
        c_uart_16450, c_uart_16550, c_uart_16550A};
295 
static const char *uart_str[] =
296 
        { "unknown", "8250", "16450", "16550", "16550A" };
297 
 
298 
static enum uart check_uart(unsigned int iobase)
299 
{
300 
        unsigned char b1,b2,b3;
301 
        enum uart u;
302 
        enum uart uart_tab[] =
303 
                { c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A };
304 
 
305 
        if (iobase <= 0 || iobase > 0x1000-SER_EXTENT)
306 
                return c_uart_unknown;
307 
        if (check_region(iobase, SER_EXTENT))
308 
                return c_uart_unknown;
309 
        b1 = inb(UART_MCR(iobase));
310 
        outb(b1 | 0x10, UART_MCR(iobase));      /* loopback mode */
311 
        b2 = inb(UART_MSR(iobase));
312 
        outb(0x1a, UART_MCR(iobase));
313 
        b3 = inb(UART_MSR(iobase)) & 0xf0;
314 
        outb(b1, UART_MCR(iobase));        /* restore old values */
315 
        outb(b2, UART_MSR(iobase));
316 
        if (b3 != 0x90)
317 
                return c_uart_unknown;
318 
        inb(UART_RBR(iobase));
319 
        inb(UART_RBR(iobase));
320 
        outb(0x01, UART_FCR(iobase));           /* enable FIFOs */
321 
        u = uart_tab[(inb(UART_IIR(iobase)) >> 6) & 3];
322 
        if (u == c_uart_16450) {
323 
                outb(0x5a, UART_SCR(iobase));
324 
                b1 = inb(UART_SCR(iobase));
325 
                outb(0xa5, UART_SCR(iobase));
326 
                b2 = inb(UART_SCR(iobase));
327 
                if ((b1 != 0x5a) || (b2 != 0xa5))
328 
                        u = c_uart_8250;
329 
        }
330 
        return u;
331 
}
332 
 
333 
/* --------------------------------------------------------------------- */
334 
 
335 
static int check_midi(unsigned int iobase)
336 
{
337 
        unsigned long timeout;
338 
        unsigned long flags;
339 
        unsigned char b;
340 
 
341 
        if (iobase <= 0 || iobase > 0x1000-MIDI_EXTENT)
342 
                return 0;
343 
        if (check_region(iobase, MIDI_EXTENT))
344 
                return 0;
345 
        timeout = jiffies + (HZ / 100);
346 
        while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
347 
                if ((signed)(jiffies - timeout) > 0)
348 
                        return 0;
349 
        save_flags(flags);
350 
        cli();
351 
        outb(0xff, MIDI_DATA(iobase));
352 
        b = inb(MIDI_STATUS(iobase));
353 
        restore_flags(flags);
354 
        if (!(b & MIDI_WRITE_EMPTY))
355 
                return 0;
356 
        while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
357 
                if ((signed)(jiffies - timeout) > 0)
358 
                        return 0;
359 
        return 1;
360 
}
361 
 
362 
/* --------------------------------------------------------------------- */
363 
 
364 
void sm_output_status(struct sm_state *sm)
365 
{
366 
        int invert_dcd = 0;
367 
        int invert_ptt = 0;
368 
 
369 
        int ptt = /*hdlcdrv_ptt(&sm->hdrv)*/(sm->dma.ptt_cnt > 0) ^ invert_ptt;
370 
        int dcd = (!!sm->hdrv.hdlcrx.dcd) ^ invert_dcd;
371 
 
372 
        if (sm->hdrv.ptt_out.flags & SP_SER) {
373 
                outb(dcd | (ptt << 1), UART_MCR(sm->hdrv.ptt_out.seriobase));
374 
                outb(0x40 & (-ptt), UART_LCR(sm->hdrv.ptt_out.seriobase));
375 
        }
376 
        if (sm->hdrv.ptt_out.flags & SP_PAR) {
377 
                outb(ptt | (dcd << 1), LPT_DATA(sm->hdrv.ptt_out.pariobase));
378 
        }
379 
        if (sm->hdrv.ptt_out.flags & SP_MIDI && hdlcdrv_ptt(&sm->hdrv)) {
380 
                outb(0, MIDI_DATA(sm->hdrv.ptt_out.midiiobase));
381 
        }
382 
}
383 
 
384 
/* --------------------------------------------------------------------- */
385 
 
386 
static void sm_output_open(struct sm_state *sm)
387 
{
388 
        enum uart u = c_uart_unknown;
389 
 
390 
        sm->hdrv.ptt_out.flags = 0;
391 
        if (sm->hdrv.ptt_out.seriobase > 0 &&
392 
            sm->hdrv.ptt_out.seriobase <= 0x1000-SER_EXTENT &&
393 
            ((u = check_uart(sm->hdrv.ptt_out.seriobase))) != c_uart_unknown) {
394 
                sm->hdrv.ptt_out.flags |= SP_SER;
395 
                request_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT, "sm ser ptt");
396 
                outb(0, UART_IER(sm->hdrv.ptt_out.seriobase));
397 
                /* 5 bits, 1 stop, no parity, no break, Div latch access */
398 
                outb(0x80, UART_LCR(sm->hdrv.ptt_out.seriobase));
399 
                outb(0, UART_DLM(sm->hdrv.ptt_out.seriobase));
400 
                outb(1, UART_DLL(sm->hdrv.ptt_out.seriobase)); /* as fast as possible */
401 
                /* LCR and MCR set by output_status */
402 
        }
403 
        if (sm->hdrv.ptt_out.pariobase > 0 &&
404 
            sm->hdrv.ptt_out.pariobase <= 0x1000-LPT_EXTENT &&
405 
            !check_lpt(sm->hdrv.ptt_out.pariobase)) {
406 
                sm->hdrv.ptt_out.flags |= SP_PAR;
407 
                request_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT, "sm par ptt");
408 
        }
409 
        if (sm->hdrv.ptt_out.midiiobase > 0 &&
410 
            sm->hdrv.ptt_out.midiiobase <= 0x1000-MIDI_EXTENT &&
411 
            check_midi(sm->hdrv.ptt_out.midiiobase)) {
412 
                sm->hdrv.ptt_out.flags |= SP_MIDI;
413 
                request_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT,
414 
                               "sm midi ptt");
415 
        }
416 
        sm_output_status(sm);
417 
 
418 
        printk(KERN_INFO "%s: ptt output:", sm_drvname);
419 
        if (sm->hdrv.ptt_out.flags & SP_SER)
420 
                printk(" serial interface at 0x%x, uart %s", sm->hdrv.ptt_out.seriobase,
421 
                       uart_str[u]);
422 
        if (sm->hdrv.ptt_out.flags & SP_PAR)
423 
                printk(" parallel interface at 0x%x", sm->hdrv.ptt_out.pariobase);
424 
        if (sm->hdrv.ptt_out.flags & SP_MIDI)
425 
                printk(" mpu401 (midi) interface at 0x%x", sm->hdrv.ptt_out.midiiobase);
426 
        if (!sm->hdrv.ptt_out.flags)
427 
                printk(" none");
428 
        printk("\n");
429 
}
430 
 
431 
/* --------------------------------------------------------------------- */
432 
 
433 
static void sm_output_close(struct sm_state *sm)
434 
{
435 
        /* release regions used for PTT output */
436 
        sm->hdrv.hdlctx.ptt = sm->hdrv.hdlctx.calibrate = 0;
437 
        sm_output_status(sm);
438 
        if (sm->hdrv.ptt_out.flags & SP_SER)
439 
                release_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT);
440 
        if (sm->hdrv.ptt_out.flags & SP_PAR)
441 
                release_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT);
442 
        if (sm->hdrv.ptt_out.flags & SP_MIDI)
443 
                release_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT);
444 
        sm->hdrv.ptt_out.flags = 0;
445 
}
446 
 
447 
/* --------------------------------------------------------------------- */
448 
 
449 
static int sm_open(struct device *dev);
450 
static int sm_close(struct device *dev);
451 
static int sm_ioctl(struct device *dev, struct ifreq *ifr,
452 
                    struct hdlcdrv_ioctl *hi, int cmd);
453 
 
454 
/* --------------------------------------------------------------------- */
455 
 
456 
static const struct hdlcdrv_ops sm_ops = {
457 
        sm_drvname, sm_drvinfo, sm_open, sm_close, sm_ioctl
458 
};
459 
 
460 
/* --------------------------------------------------------------------- */
461 
 
462 
static int sm_open(struct device *dev)
463 
{
464 
        struct sm_state *sm;
465 
        int err;
466 
 
467 
        if (!dev || !dev->priv ||
468 
            ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
469 
                printk(KERN_ERR "sm_open: invalid device struct\n");
470 
                return -EINVAL;
471 
        }
472 
        sm = (struct sm_state *)dev->priv;
473 
 
474 
        if (!sm->mode_tx || !sm->mode_rx || !sm->hwdrv || !sm->hwdrv->open)
475 
                return -ENODEV;
476 
        sm->hdrv.par.bitrate = sm->mode_rx->bitrate;
477 
        err = sm->hwdrv->open(dev, sm);
478 
        if (err)
479 
                return err;
480 
        sm_output_open(sm);
481 
        MOD_INC_USE_COUNT;
482 
        printk(KERN_INFO "%s: %s mode %s.%s at iobase 0x%lx irq %u dma %u dma2 %u\n",
483 
               sm_drvname, sm->hwdrv->hw_name, sm->mode_tx->name,
484 
               sm->mode_rx->name, dev->base_addr, dev->irq, dev->dma, sm->hdrv.ptt_out.dma2);
485 
        return 0;
486 
}
487 
 
488 
/* --------------------------------------------------------------------- */
489 
 
490 
static int sm_close(struct device *dev)
491 
{
492 
        struct sm_state *sm;
493 
        int err = -ENODEV;
494 
 
495 
        if (!dev || !dev->priv ||
496 
            ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
497 
                printk(KERN_ERR "sm_close: invalid device struct\n");
498 
                return -EINVAL;
499 
        }
500 
        sm = (struct sm_state *)dev->priv;
501 
 
502 
 
503 
        if (sm->hwdrv && sm->hwdrv->close)
504 
                err = sm->hwdrv && sm->hwdrv->close(dev, sm);
505 
        sm_output_close(sm);
506 
        MOD_DEC_USE_COUNT;
507 
        printk(KERN_INFO "%s: close %s at iobase 0x%lx irq %u dma %u\n",
508 
               sm_drvname, sm->hwdrv->hw_name, dev->base_addr, dev->irq, dev->dma);
509 
        return err;
510 
}
511 
 
512 
/* --------------------------------------------------------------------- */
513 
 
514 
static int sethw(struct device *dev, struct sm_state *sm, char *mode)
515 
{
516 
        char *cp = strchr(mode, ':');
517 
        const struct hardware_info **hwp = sm_hardware_table;
518 
 
519 
        if (!cp)
520 
                cp = mode;
521 
        else {
522 
                *cp++ = '\0';
523 
                while (hwp && (*hwp) && (*hwp)->hw_name && strcmp((*hwp)->hw_name, mode))
524 
                        hwp++;
525 
                if (!hwp || !*hwp || !(*hwp)->hw_name)
526 
                        return -EINVAL;
527 
                if ((*hwp)->loc_storage > sizeof(sm->hw)) {
528 
                        printk(KERN_ERR "%s: insufficient storage for hw driver %s (%d)\n",
529 
                               sm_drvname, (*hwp)->hw_name, (*hwp)->loc_storage);
530 
                        return -EINVAL;
531 
                }
532 
                sm->hwdrv = *hwp;
533 
        }
534 
        if (!*cp)
535 
                return 0;
536 
        if (sm->hwdrv && sm->hwdrv->sethw)
537 
                return sm->hwdrv->sethw(dev, sm, cp);
538 
        return -EINVAL;
539 
}
540 
 
541 
/* --------------------------------------------------------------------- */
542 
 
543 
static int sm_ioctl(struct device *dev, struct ifreq *ifr,
544 
                    struct hdlcdrv_ioctl *hi, int cmd)
545 
{
546 
        struct sm_state *sm;
547 
        struct sm_ioctl bi;
548 
        unsigned long flags;
549 
        unsigned int newdiagmode;
550 
        unsigned int newdiagflags;
551 
        char *cp;
552 
        const struct modem_tx_info **mtp = sm_modem_tx_table;
553 
        const struct modem_rx_info **mrp = sm_modem_rx_table;
554 
        const struct hardware_info **hwp = sm_hardware_table;
555 
 
556 
        if (!dev || !dev->priv ||
557 
            ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
558 
                printk(KERN_ERR "sm_ioctl: invalid device struct\n");
559 
                return -EINVAL;
560 
        }
561 
        sm = (struct sm_state *)dev->priv;
562 
 
563 
        if (cmd != SIOCDEVPRIVATE) {
564 
                if (!sm->hwdrv || !sm->hwdrv->ioctl)
565 
                        return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
566 
                return -ENOIOCTLCMD;
567 
        }
568 
        switch (hi->cmd) {
569 
        default:
570 
                if (sm->hwdrv && sm->hwdrv->ioctl)
571 
                        return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
572 
                return -ENOIOCTLCMD;
573 
 
574 
        case HDLCDRVCTL_GETMODE:
575 
                cp = hi->data.modename;
576 
                if (sm->hwdrv && sm->hwdrv->hw_name)
577 
                        cp += sprintf(cp, "%s:", sm->hwdrv->hw_name);
578 
                else
579 
                        cp += sprintf(cp, "<unspec>:");
580 
                if (sm->mode_tx && sm->mode_tx->name)
581 
                        cp += sprintf(cp, "%s", sm->mode_tx->name);
582 
                else
583 
                        cp += sprintf(cp, "<unspec>");
584 
                if (!sm->mode_rx || !sm->mode_rx ||
585 
                    strcmp(sm->mode_rx->name, sm->mode_tx->name)) {
586 
                        if (sm->mode_rx && sm->mode_rx->name)
587 
                                cp += sprintf(cp, ",%s", sm->mode_rx->name);
588 
                        else
589 
                                cp += sprintf(cp, ",<unspec>");
590 
                }
591 
                if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
592 
                        return -EFAULT;
593 
                return 0;
594 
 
595 
        case HDLCDRVCTL_SETMODE:
596 
                if (dev->start || !suser())
597 
                        return -EACCES;
598 
                hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
599 
                return sethw(dev, sm, hi->data.modename);
600 
 
601 
        case HDLCDRVCTL_MODELIST:
602 
                cp = hi->data.modename;
603 
                while (*hwp) {
604 
                        if ((*hwp)->hw_name)
605 
                                cp += sprintf("%s:,", (*hwp)->hw_name);
606 
                        hwp++;
607 
                }
608 
                while (*mtp) {
609 
                        if ((*mtp)->name)
610 
                                cp += sprintf(">%s,", (*mtp)->name);
611 
                        mtp++;
612 
                }
613 
                while (*mrp) {
614 
                        if ((*mrp)->name)
615 
                                cp += sprintf("<%s,", (*mrp)->name);
616 
                        mrp++;
617 
                }
618 
                cp[-1] = '\0';
619 
                if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
620 
                        return -EFAULT;
621 
                return 0;
622 
 
623 
#ifdef SM_DEBUG
624 
        case SMCTL_GETDEBUG:
625 
                if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
626 
                        return -EFAULT;
627 
                bi.data.dbg.int_rate = sm->debug_vals.last_intcnt;
628 
                bi.data.dbg.mod_cycles = sm->debug_vals.mod_cyc;
629 
                bi.data.dbg.demod_cycles = sm->debug_vals.demod_cyc;
630 
                bi.data.dbg.dma_residue = sm->debug_vals.dma_residue;
631 
                sm->debug_vals.mod_cyc = sm->debug_vals.demod_cyc =
632 
                        sm->debug_vals.dma_residue = 0;
633 
                if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
634 
                        return -EFAULT;
635 
                return 0;
636 
#endif /* SM_DEBUG */
637 
 
638 
        case SMCTL_DIAGNOSE:
639 
                if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
640 
                        return -EFAULT;
641 
                newdiagmode = bi.data.diag.mode;
642 
                newdiagflags = bi.data.diag.flags;
643 
                if (newdiagmode > SM_DIAGMODE_CONSTELLATION)
644 
                        return -EINVAL;
645 
                bi.data.diag.mode = sm->diag.mode;
646 
                bi.data.diag.flags = sm->diag.flags;
647 
                bi.data.diag.samplesperbit = sm->mode_rx->sperbit;
648 
                if (sm->diag.mode != newdiagmode) {
649 
                        save_flags(flags);
650 
                        cli();
651 
                        sm->diag.ptr = -1;
652 
                        sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
653 
                        sm->diag.mode = newdiagmode;
654 
                        restore_flags(flags);
655 
                        if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
656 
                                return -EFAULT;
657 
                        return 0;
658 
                }
659 
                if (sm->diag.ptr < 0 || sm->diag.mode == SM_DIAGMODE_OFF) {
660 
                        if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
661 
                                return -EFAULT;
662 
                        return 0;
663 
                }
664 
                if (bi.data.diag.datalen > DIAGDATALEN)
665 
                        bi.data.diag.datalen = DIAGDATALEN;
666 
                if (sm->diag.ptr < bi.data.diag.datalen) {
667 
                        if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
668 
                                return -EFAULT;
669 
                        return 0;
670 
                }
671 
                if (copy_to_user(bi.data.diag.data, sm->diag.data,
672 
                                 bi.data.diag.datalen * sizeof(short)))
673 
                        return -EFAULT;
674 
                bi.data.diag.flags |= SM_DIAGFLAG_VALID;
675 
                save_flags(flags);
676 
                cli();
677 
                sm->diag.ptr = -1;
678 
                sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
679 
                sm->diag.mode = newdiagmode;
680 
                restore_flags(flags);
681 
                if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
682 
                        return -EFAULT;
683 
                return 0;
684 
        }
685 
}
686 
 
687 
/* --------------------------------------------------------------------- */
688 
 
689 
#ifdef __i386__
690 
 
691 
int sm_x86_capability = 0;
692 
 
693 
__initfunc(static void i386_capability(void))
694 
{
695 
       unsigned long flags;
696 
       unsigned long fl1;
697 
       union {
698 
               struct {
699 
                       unsigned int ebx, edx, ecx;
700 
               } r;
701 
               unsigned char s[13];
702 
       } id;
703 
       unsigned int eax;
704 
 
705 
       save_flags(flags);
706 
       flags |= 0x200000;
707 
       restore_flags(flags);
708 
       save_flags(flags);
709 
       fl1 = flags;
710 
       flags &= ~0x200000;
711 
       restore_flags(flags);
712 
       save_flags(flags);
713 
       if (!(fl1 & 0x200000) || (flags & 0x200000)) {
714 
               printk(KERN_WARNING "%s: cpu does not support CPUID\n", sm_drvname);
715 
               return;
716 
       }
717 
       __asm__ ("cpuid" : "=a" (eax), "=b" (id.r.ebx), "=c" (id.r.ecx), "=d" (id.r.edx) :
718 
                "0" (0));
719 
       id.s[12] = 0;
720 
       if (eax < 1) {
721 
               printk(KERN_WARNING "%s: cpu (vendor string %s) does not support capability "
722 
                      "list\n", sm_drvname, id.s);
723 
               return;
724 
       }
725 
       printk(KERN_INFO "%s: cpu: vendor string %s ", sm_drvname, id.s);
726 
       __asm__ ("cpuid" : "=a" (eax), "=d" (sm_x86_capability) : "0" (1) : "ebx", "ecx");
727 
       printk("fam %d mdl %d step %d cap 0x%x\n", (eax >> 8) & 15, (eax >> 4) & 15,
728 
              eax & 15, sm_x86_capability);
729 
}
730 
#endif /* __i386__ */
731 
 
732 
/* --------------------------------------------------------------------- */
733 
 
734 
#ifdef MODULE
735 
__initfunc(static int sm_init(void))
736 
#else /* MODULE */
737 
__initfunc(int sm_init(void))
738 
#endif /* MODULE */
739 
{
740 
        int i, j, found = 0;
741 
        char set_hw = 1;
742 
        struct sm_state *sm;
743 
        char ifname[HDLCDRV_IFNAMELEN];
744 
 
745 
        printk(sm_drvinfo);
746 
#ifdef __i386__
747 
       i386_capability();
748 
#endif /* __i386__ */
749 
        /*
750 
         * register net devices
751 
         */
752 
        for (i = 0; i < NR_PORTS; i++) {
753 
                struct device *dev = sm_device+i;
754 
                sprintf(ifname, "sm%d", i);
755 
 
756 
                if (!sm_ports[i].mode)
757 
                        set_hw = 0;
758 
                if (!set_hw)
759 
                        sm_ports[i].iobase = sm_ports[i].irq = 0;
760 
                j = hdlcdrv_register_hdlcdrv(dev, &sm_ops, sizeof(struct sm_state),
761 
                                             ifname, sm_ports[i].iobase,
762 
                                             sm_ports[i].irq, sm_ports[i].dma);
763 
                if (!j) {
764 
                        sm = (struct sm_state *)dev->priv;
765 
                        sm->hdrv.ptt_out.dma2 = sm_ports[i].dma2;
766 
                        sm->hdrv.ptt_out.seriobase = sm_ports[i].seriobase;
767 
                        sm->hdrv.ptt_out.pariobase = sm_ports[i].pariobase;
768 
                        sm->hdrv.ptt_out.midiiobase = sm_ports[i].midiiobase;
769 
                        if (set_hw && sethw(dev, sm, sm_ports[i].mode))
770 
                                set_hw = 0;
771 
                        found++;
772 
                } else {
773 
                        printk(KERN_WARNING "%s: cannot register net device\n",
774 
                               sm_drvname);
775 
                }
776 
        }
777 
        if (!found)
778 
                return -ENXIO;
779 
        return 0;
780 
}
781 
 
782 
/* --------------------------------------------------------------------- */
783 
 
784 
#ifdef MODULE
785 
 
786 
/*
787 
 * command line settable parameters
788 
 */
789 
static char *mode = NULL;
790 
static int iobase = -1;
791 
static int irq = -1;
792 
static int dma = -1;
793 
static int dma2 = -1;
794 
static int serio = 0;
795 
static int pario = 0;
796 
static int midiio = 0;
797 
 
798 
#if LINUX_VERSION_CODE >= 0x20115
799 
 
800 
MODULE_PARM(mode, "s");
801 
MODULE_PARM_DESC(mode, "soundmodem operating mode; eg. sbc:afsk1200 or wss:fsk9600");
802 
MODULE_PARM(iobase, "i");
803 
MODULE_PARM_DESC(iobase, "soundmodem base address");
804 
MODULE_PARM(irq, "i");
805 
MODULE_PARM_DESC(irq, "soundmodem interrupt");
806 
MODULE_PARM(dma, "i");
807 
MODULE_PARM_DESC(dma, "soundmodem dma channel");
808 
MODULE_PARM(dma2, "i");
809 
MODULE_PARM_DESC(dma2, "soundmodem 2nd dma channel; full duplex only");
810 
MODULE_PARM(serio, "i");
811 
MODULE_PARM_DESC(serio, "soundmodem PTT output on serial port");
812 
MODULE_PARM(pario, "i");
813 
MODULE_PARM_DESC(pario, "soundmodem PTT output on parallel port");
814 
MODULE_PARM(midiio, "i");
815 
MODULE_PARM_DESC(midiio, "soundmodem PTT output on midi port");
816 
 
817 
MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
818 
MODULE_DESCRIPTION("Soundcard amateur radio modem driver");
819 
 
820 
#endif
821 
 
822 
__initfunc(int init_module(void))
823 
{
824 
        if (mode) {
825 
                if (iobase == -1)
826 
                        iobase = (!strncmp(mode, "sbc", 3)) ? 0x220 : 0x530;
827 
                if (irq == -1)
828 
                        irq = (!strncmp(mode, "sbc", 3)) ? 5 : 11;
829 
                if (dma == -1)
830 
                        dma = 1;
831 
        }
832 
        sm_ports[0].mode = mode;
833 
        sm_ports[0].iobase = iobase;
834 
        sm_ports[0].irq = irq;
835 
        sm_ports[0].dma = dma;
836 
        sm_ports[0].dma2 = dma2;
837 
        sm_ports[0].seriobase = serio;
838 
        sm_ports[0].pariobase = pario;
839 
        sm_ports[0].midiiobase = midiio;
840 
        sm_ports[1].mode = NULL;
841 
 
842 
        return sm_init();
843 
}
844 
 
845 
/* --------------------------------------------------------------------- */
846 
 
847 
void cleanup_module(void)
848 
{
849 
        int i;
850 
 
851 
        printk(KERN_INFO "sm: cleanup_module called\n");
852 
 
853 
        for(i = 0; i < NR_PORTS; i++) {
854 
                struct device *dev = sm_device+i;
855 
                struct sm_state *sm = (struct sm_state *)dev->priv;
856 
 
857 
                if (sm) {
858 
                        if (sm->hdrv.magic != HDLCDRV_MAGIC)
859 
                                printk(KERN_ERR "sm: invalid magic in "
860 
                                       "cleanup_module\n");
861 
                        else
862 
                                hdlcdrv_unregister_hdlcdrv(dev);
863 
                }
864 
        }
865 
}
866 
 
867 
#else /* MODULE */
868 
/* --------------------------------------------------------------------- */
869 
/*
870 
 * format: sm=io,irq,dma[,dma2[,serio[,pario]]],mode
871 
 * mode: hw:modem
872 
 * hw: sbc, wss, wssfdx
873 
 * modem: afsk1200, fsk9600
874 
 */
875 
 
876 
__initfunc(void sm_setup(char *str, int *ints))
877 
{
878 
        int i;
879 
 
880 
        for (i = 0; (i < NR_PORTS) && (sm_ports[i].mode); i++);
881 
        if ((i >= NR_PORTS) || (ints[0] < 3)) {
882 
                printk(KERN_INFO "%s: too many or invalid interface "
883 
                       "specifications\n", sm_drvname);
884 
                return;
885 
        }
886 
        sm_ports[i].mode = str;
887 
        sm_ports[i].iobase = ints[1];
888 
        sm_ports[i].irq = ints[2];
889 
        sm_ports[i].dma = ints[3];
890 
        sm_ports[i].dma2 = (ints[0] >= 4) ? ints[4] : 0;
891 
        sm_ports[i].seriobase = (ints[0] >= 5) ? ints[5] : 0;
892 
        sm_ports[i].pariobase = (ints[0] >= 6) ? ints[6] : 0;
893 
        sm_ports[i].midiiobase = (ints[0] >= 7) ? ints[7] : 0;
894 
        if (i < NR_PORTS-1)
895 
                sm_ports[i+1].mode = NULL;
896 
}
897 
 
898 
#endif /* MODULE */
899 
/* --------------------------------------------------------------------- */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.