Subversion Repositories or1k

/* wd.c: A WD80x3 ethernet driver for linux. */

/*

        Written 1993-94 by Donald Becker.

        Copyright 1993 United States Government as represented by the

        Director, National Security Agency.

        This software may be used and distributed according to the terms

        of the GNU Public License, incorporated herein by reference.

        The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O

        Center of Excellence in Space Data and Information Sciences

           Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771

        This is a driver for WD8003 and WD8013 "compatible" ethercards.

        Thanks to Russ Nelson (nelson@crnwyr.com) for loaning me a WD8013.

        Changelog:

        Paul Gortmaker  : multiple card support for module users, support

                          for non-standard memory sizes.

*/

static const char *version =

        "wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";

#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/sched.h>

#include <linux/errno.h>

#include <linux/string.h>

#include <asm/io.h>

#include <asm/system.h>

#include <linux/netdevice.h>

#include <linux/etherdevice.h>

#include "8390.h"

/* A zero-terminated list of I/O addresses to be probed. */

static unsigned int wd_portlist[] =

{0x300, 0x280, 0x380, 0x240, 0};

int wd_probe(struct device *dev);

int wd_probe1(struct device *dev, int ioaddr);

static int wd_open(struct device *dev);

static void wd_reset_8390(struct device *dev);

static void wd_get_8390_hdr(struct device *dev, struct e8390_pkt_hdr *hdr,

                                                int ring_page);

static void wd_block_input(struct device *dev, int count,

                                                  struct sk_buff *skb, int ring_offset);

static void wd_block_output(struct device *dev, int count,

                                                        const unsigned char *buf, const int start_page);

static int wd_close_card(struct device *dev);

#define WD_START_PG             0x00    /* First page of TX buffer */

#define WD03_STOP_PG    0x20    /* Last page +1 of RX ring */

#define WD13_STOP_PG    0x40    /* Last page +1 of RX ring */

#define WD_CMDREG               0                /* Offset to ASIC command register. */

#define  WD_RESET               0x80    /* Board reset, in WD_CMDREG. */

#define  WD_MEMENB              0x40    /* Enable the shared memory. */

#define WD_CMDREG5              5               /* Offset to 16-bit-only ASIC register 5. */

#define  ISA16                  0x80    /* Enable 16 bit access from the ISA bus. */

#define  NIC16                  0x40    /* Enable 16 bit access from the 8390. */

#define WD_NIC_OFFSET   16              /* Offset to the 8390 from the base_addr. */

#define WD_IO_EXTENT    32

/*      Probe for the WD8003 and WD8013.  These cards have the station

        address PROM at I/O ports <base>+8 to <base>+13, with a checksum

        following. A Soundblaster can have the same checksum as an WDethercard,

        so we have an extra exclusionary check for it.

        The wd_probe1() routine initializes the card and fills the

        station address field. */

#ifdef HAVE_DEVLIST

struct netdev_entry wd_drv =

{"wd", wd_probe1, WD_IO_EXTENT, wd_portlist};

#else

int wd_probe(struct device *dev)

{

        int i;

        int base_addr = dev ? dev->base_addr : 0;

        if (base_addr > 0x1ff)          /* Check a single specified location. */

                return wd_probe1(dev, base_addr);

        else if (base_addr != 0) /* Don't probe at all. */

                return ENXIO;

        for (i = 0; wd_portlist[i]; i++) {

                int ioaddr = wd_portlist[i];

                if (check_region(ioaddr, WD_IO_EXTENT))

                        continue;

                if (wd_probe1(dev, ioaddr) == 0)

                        return 0;

        }

        return ENODEV;

}

#endif

int wd_probe1(struct device *dev, int ioaddr)

{

        int i;

        int checksum = 0;

        int ancient = 0;                 /* An old card without config registers. */

        int word16 = 0;                          /* 0 = 8 bit, 1 = 16 bit */

        const char *model_name;

        static unsigned version_printed = 0;

        for (i = 0; i < 8; i++)

                checksum += inb(ioaddr + 8 + i);

        if (inb(ioaddr + 8) == 0xff     /* Extra check to avoid soundcard. */

                || inb(ioaddr + 9) == 0xff

                || (checksum & 0xff) != 0xFF)

                return ENODEV;

        /* We should have a "dev" from Space.c or the static module table. */

        if (dev == NULL) {

                printk("wd.c: Passed a NULL device.\n");

                dev = init_etherdev(0, 0);

        }

        /* Check for semi-valid mem_start/end values if supplied. */

        if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) {

                printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n");

                dev->mem_start = 0;

                dev->mem_end = 0;

        }

        if (ei_debug  &&  version_printed++ == 0)

                printk(version);

        printk("%s: WD80x3 at %#3x, ", dev->name, ioaddr);

        for (i = 0; i < 6; i++)

                printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));

        /* The following PureData probe code was contributed by

           Mike Jagdis <jaggy@purplet.demon.co.uk>. Puredata does software

           configuration differently from others so we have to check for them.

           This detects an 8 bit, 16 bit or dumb (Toshiba, jumpered) card.

           */

        if (inb(ioaddr+0) == 'P' && inb(ioaddr+1) == 'D') {

                unsigned char reg5 = inb(ioaddr+5);

                switch (inb(ioaddr+2)) {

                case 0x03: word16 = 0; model_name = "PDI8023-8"; break;

                case 0x05: word16 = 0; model_name = "PDUC8023";  break;

                case 0x0a: word16 = 1; model_name = "PDI8023-16"; break;

                        /* Either 0x01 (dumb) or they've released a new version. */

                default:         word16 = 0; model_name = "PDI8023";     break;

                }

                dev->mem_start = ((reg5 & 0x1c) + 0xc0) << 12;

                dev->irq = (reg5 & 0xe0) == 0xe0 ? 10 : (reg5 >> 5) + 1;

        } else {                                                                /* End of PureData probe */

                /* This method of checking for a 16-bit board is borrowed from the

                   we.c driver.  A simpler method is just to look in ASIC reg. 0x03.

                   I'm comparing the two method in alpha test to make certain they

                   return the same result. */

                /* Check for the old 8 bit board - it has register 0/8 aliasing.

                   Do NOT check i>=6 here -- it hangs the old 8003 boards! */

                for (i = 0; i < 6; i++)

                        if (inb(ioaddr+i) != inb(ioaddr+8+i))

                                break;

                if (i >= 6) {

                        ancient = 1;

                        model_name = "WD8003-old";

                        word16 = 0;

                } else {

                        int tmp = inb(ioaddr+1); /* fiddle with 16bit bit */

                        outb( tmp ^ 0x01, ioaddr+1 ); /* attempt to clear 16bit bit */

                        if (((inb( ioaddr+1) & 0x01) == 0x01) /* A 16 bit card */

                                && (tmp & 0x01) == 0x01 ) {                             /* In a 16 slot. */

                                int asic_reg5 = inb(ioaddr+WD_CMDREG5);

                                /* Magic to set ASIC to word-wide mode. */

                                outb( NIC16 | (asic_reg5&0x1f), ioaddr+WD_CMDREG5);

                                outb(tmp, ioaddr+1);

                                model_name = "WD8013";

                                word16 = 1;             /* We have a 16bit board here! */

                        } else {

                                model_name = "WD8003";

                                word16 = 0;

                        }

                        outb(tmp, ioaddr+1);                    /* Restore original reg1 value. */

                }

#ifndef final_version

                if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01))

                        printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).",

                                   word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8);

#endif

        }

#if defined(WD_SHMEM) && WD_SHMEM > 0x80000

        /* Allow a compile-time override.        */

        dev->mem_start = WD_SHMEM;

#else

        if (dev->mem_start == 0) {

                /* Sanity and old 8003 check */

                int reg0 = inb(ioaddr);

                if (reg0 == 0xff || reg0 == 0) {

                        /* Future plan: this could check a few likely locations first. */

                        dev->mem_start = 0xd0000;

                        printk(" assigning address %#lx", dev->mem_start);

                } else {

                        int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f;

                        /* Some boards don't have the register 5 -- it returns 0xff. */

                        if (high_addr_bits == 0x1f || word16 == 0)

                                high_addr_bits = 0x01;

                        dev->mem_start = ((reg0&0x3f) << 13) + (high_addr_bits << 19);

                }

        }

#endif

        /* The 8390 isn't at the base address -- the ASIC regs are there! */

        dev->base_addr = ioaddr+WD_NIC_OFFSET;

        if (dev->irq < 2) {

                int irqmap[] = {9,3,5,7,10,11,15,4};

                int reg1 = inb(ioaddr+1);

                int reg4 = inb(ioaddr+4);

                if (ancient || reg1 == 0xff) {  /* Ack!! No way to read the IRQ! */

                        short nic_addr = ioaddr+WD_NIC_OFFSET;

                        /* We have an old-style ethercard that doesn't report its IRQ

                           line.  Do autoirq to find the IRQ line. Note that this IS NOT

                           a reliable way to trigger an interrupt. */

                        outb_p(E8390_NODMA + E8390_STOP, nic_addr);

                        outb(0x00, nic_addr+EN0_IMR);   /* Disable all intrs. */

                        autoirq_setup(0);

                        outb_p(0xff, nic_addr + EN0_IMR);       /* Enable all interrupts. */

                        outb_p(0x00, nic_addr + EN0_RCNTLO);

                        outb_p(0x00, nic_addr + EN0_RCNTHI);

                        outb(E8390_RREAD+E8390_START, nic_addr); /* Trigger it... */

                        dev->irq = autoirq_report(2);

                        outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */

                        if (ei_debug > 2)

                                printk(" autoirq is %d", dev->irq);

                        if (dev->irq < 2)

                                dev->irq = word16 ? 10 : 5;

                } else

                        dev->irq = irqmap[((reg4 >> 5) & 0x03) + (reg1 & 0x04)];

        } else if (dev->irq == 2)               /* Fixup bogosity: IRQ2 is really IRQ9 */

                dev->irq = 9;

        /* Snarf the interrupt now.  There's no point in waiting since we cannot

           share and the board will usually be enabled. */

        if (request_irq(dev->irq, ei_interrupt, 0, model_name, NULL)) {

                printk (" unable to get IRQ %d.\n", dev->irq);

                return EAGAIN;

        }

        /* Allocate dev->priv and fill in 8390 specific dev fields. */

        if (ethdev_init(dev)) {

                printk (" unable to get memory for dev->priv.\n");

                free_irq(dev->irq, NULL);

                return -ENOMEM;

        }

        /* OK, were are certain this is going to work.  Setup the device. */

        request_region(ioaddr, WD_IO_EXTENT, model_name);

        ei_status.name = model_name;

        ei_status.word16 = word16;

        ei_status.tx_start_page = WD_START_PG;

        ei_status.rx_start_page = WD_START_PG + TX_PAGES;

        /* Don't map in the shared memory until the board is actually opened. */

        dev->rmem_start = dev->mem_start + TX_PAGES*256;

        /* Some cards (eg WD8003EBT) can be jumpered for more (32k!) memory. */

        if (dev->mem_end != 0) {

                ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;

        } else {

                ei_status.stop_page = word16 ? WD13_STOP_PG : WD03_STOP_PG;

                dev->mem_end = dev->mem_start + (ei_status.stop_page - WD_START_PG)*256;

        }

        dev->rmem_end = dev->mem_end;

        printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n",

                   model_name, dev->irq, dev->mem_start, dev->mem_end-1);

        ei_status.reset_8390 = &wd_reset_8390;

        ei_status.block_input = &wd_block_input;

        ei_status.block_output = &wd_block_output;

        ei_status.get_8390_hdr = &wd_get_8390_hdr;

        dev->open = &wd_open;

        dev->stop = &wd_close_card;

        NS8390_init(dev, 0);

#if 1

        /* Enable interrupt generation on softconfig cards -- M.U */

        /* .. but possibly potentially unsafe - Donald */

        if (inb(ioaddr+14) & 0x20)

                outb(inb(ioaddr+4)|0x80, ioaddr+4);

#endif

        return 0;

}

static int

wd_open(struct device *dev)

{

  int ioaddr = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */

  /* Map in the shared memory. Always set register 0 last to remain

         compatible with very old boards. */

  ei_status.reg0 = ((dev->mem_start>>13) & 0x3f) | WD_MEMENB;

  ei_status.reg5 = ((dev->mem_start>>19) & 0x1f) | NIC16;

  if (ei_status.word16)

          outb(ei_status.reg5, ioaddr+WD_CMDREG5);

  outb(ei_status.reg0, ioaddr); /* WD_CMDREG */

  ei_open(dev);

  MOD_INC_USE_COUNT;

  return 0;

}

static void

wd_reset_8390(struct device *dev)

{

        int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */

        outb(WD_RESET, wd_cmd_port);

        if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies);

        ei_status.txing = 0;

        /* Set up the ASIC registers, just in case something changed them. */

        outb((((dev->mem_start>>13) & 0x3f)|WD_MEMENB), wd_cmd_port);

        if (ei_status.word16)

                outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5);

        if (ei_debug > 1) printk("reset done\n");

        return;

}

/* Grab the 8390 specific header. Similar to the block_input routine, but

   we don't need to be concerned with ring wrap as the header will be at

   the start of a page, so we optimize accordingly. */

static void

wd_get_8390_hdr(struct device *dev, struct e8390_pkt_hdr *hdr, int ring_page)

{

        int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */

        unsigned long hdr_start = dev->mem_start + ((ring_page - WD_START_PG)<<8);

        /* We'll always get a 4 byte header read followed by a packet read, so

           we enable 16 bit mode before the header, and disable after the body. */

        if (ei_status.word16)

                outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5);

#ifdef notdef

        /* Officially this is what we are doing, but the readl() is faster */

        memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));

#else

        ((unsigned int*)hdr)[0] = readl(hdr_start);

#endif

}

/* Block input and output are easy on shared memory ethercards, and trivial

   on the Western digital card where there is no choice of how to do it.

   The only complications are that the ring buffer wraps, and need to map

   switch between 8- and 16-bit modes. */

static void

wd_block_input(struct device *dev, int count, struct sk_buff *skb, int ring_offset)

{

        int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */

        unsigned long xfer_start = dev->mem_start + ring_offset - (WD_START_PG<<8);

        if (xfer_start + count > dev->rmem_end) {

                /* We must wrap the input move. */

                int semi_count = dev->rmem_end - xfer_start;

                memcpy_fromio(skb->data, xfer_start, semi_count);

                count -= semi_count;

                memcpy_fromio(skb->data + semi_count, dev->rmem_start, count);

        } else {

                /* Packet is in one chunk -- we can copy + cksum. */

                eth_io_copy_and_sum(skb, xfer_start, count, 0);

        }

        /* Turn off 16 bit access so that reboot works.  ISA brain-damage */

        if (ei_status.word16)

                outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5);

}

static void

wd_block_output(struct device *dev, int count, const unsigned char *buf,

                                int start_page)

{

        int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */

        long shmem = dev->mem_start + ((start_page - WD_START_PG)<<8);

        if (ei_status.word16) {

                /* Turn on and off 16 bit access so that reboot works. */

                outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5);

                memcpy_toio(shmem, buf, count);

                outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5);

        } else

                memcpy_toio(shmem, buf, count);

}

static int

wd_close_card(struct device *dev)

{

        int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */

        if (ei_debug > 1)

                printk("%s: Shutting down ethercard.\n", dev->name);

        ei_close(dev);

        /* Change from 16-bit to 8-bit shared memory so reboot works. */

        if (ei_status.word16)

                outb(ei_status.reg5, wd_cmdreg + WD_CMDREG5 );

        /* And disable the shared memory. */

        outb(ei_status.reg0 & ~WD_MEMENB, wd_cmdreg);

        MOD_DEC_USE_COUNT;

        return 0;

}

#ifdef MODULE

#define MAX_WD_CARDS    4       /* Max number of wd cards per module */

#define NAMELEN         8       /* # of chars for storing dev->name */

static char namelist[NAMELEN * MAX_WD_CARDS] = { 0, };

static struct device dev_wd[MAX_WD_CARDS] = {

        {

                NULL,           /* assign a chunk of namelist[] below */

                0, 0, 0, 0,

                0, 0,

                0, 0, 0, NULL, NULL

        },

};

static int io[MAX_WD_CARDS] = { 0, };

static int irq[MAX_WD_CARDS]  = { 0, };

static int mem[MAX_WD_CARDS] = { 0, };

static int mem_end[MAX_WD_CARDS] = { 0, };       /* for non std. mem size */

/* This is set up so that only a single autoprobe takes place per call.

ISA device autoprobes on a running machine are not recommended. */

int

init_module(void)

{

        int this_dev, found = 0;

        for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {

                struct device *dev = &dev_wd[this_dev];

                dev->name = namelist+(NAMELEN*this_dev);

                dev->irq = irq[this_dev];

                dev->base_addr = io[this_dev];

                dev->mem_start = mem[this_dev];

                dev->mem_end = mem_end[this_dev];

                dev->init = wd_probe;

                if (io[this_dev] == 0)  {

                        if (this_dev != 0) break; /* only autoprobe 1st one */

                        printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n");

                }

                if (register_netdev(dev) != 0) {

                        printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]);

                        if (found != 0) return 0; /* Got at least one. */

                        return -ENXIO;

                }

                found++;

        }

        return 0;

}

void

cleanup_module(void)

{

        int this_dev;

        for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {

                struct device *dev = &dev_wd[this_dev];

                if (dev->priv != NULL) {

                        int ioaddr = dev->base_addr - WD_NIC_OFFSET;

                        kfree(dev->priv);

                        dev->priv = NULL;

                        free_irq(dev->irq, NULL);

                        irq2dev_map[dev->irq] = NULL;

                        release_region(ioaddr, WD_IO_EXTENT);

                        unregister_netdev(dev);

                }

        }

}

#endif /* MODULE */

/*

 * Local variables:

 *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c wd.c"

 *  version-control: t

 *  tab-width: 4

 *  kept-new-versions: 5

 * End:

 */