URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [sbus/] [char/] [sunkbd.c] - Blame information for rev 1765

Details | Compare with Previous | View Log

/* keyboard.c: Sun keyboard driver.
 *
 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
 * Added vuid event generation and /dev/kbd device for SunOS
 * compatibility - Miguel (miguel@nuclecu.unam.mx)
 */
 
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <asm/kbio.h>
#include <asm/vuid_event.h>
#include <asm/delay.h>
#include <asm/bitops.h>
#include <asm/oplib.h>
 
#include "../../char/kbd_kern.h"
#include "../../char/diacr.h"
#include "../../char/vt_kern.h"
 
#define SIZE(x) (sizeof(x)/sizeof((x)[0]))
 
/* Define this one if you are making a new frame buffer driver */
/* it will not block the keyboard */
/* #define CODING_NEW_DRIVER */
 
/* KBD device number, temporal */
#define KBD_MAJOR 11
 
#define KBD_REPORT_ERR
#define KBD_REPORT_UNKN
 
#ifndef KBD_DEFMODE
#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
#endif
 
#ifndef KBD_DEFLEDS
/*
 * Some laptops take the 789uiojklm,. keys as number pad when NumLock
 * is on. This seems a good reason to start with NumLock off.
 */
#define KBD_DEFLEDS 0
#endif
 
#ifndef KBD_DEFLOCK
#define KBD_DEFLOCK 0
#endif
 
extern void poke_blanked_console(void);
extern void ctrl_alt_del(void);
extern void reset_vc(unsigned int new_console);
extern void scrollback(int);
extern void scrollfront(int);
 
unsigned char kbd_read_mask = 0x01;     /* modified by psaux.c */
 
/*
 * global state includes the following, and various static variables
 * in this module: prev_scancode, shift_state, diacr, npadch, dead_key_next.
 * (last_console is now a global variable)
 */
 
/* shift state counters.. */
static unsigned char k_down[NR_SHIFT] = {0, };
/* keyboard key bitmap */
#define BITS_PER_LONG (8*sizeof(unsigned long))
static unsigned long key_down[256/BITS_PER_LONG] = { 0, };
 
void push_kbd (int scan);
int kbd_redirected = 0;
 
static int dead_key_next = 0;
/*
 * In order to retrieve the shift_state (for the mouse server), either
 * the variable must be global, or a new procedure must be created to
 * return the value. I chose the former way.
 */
/*static*/ int shift_state = 0;
static int npadch = -1;                 /* -1 or number assembled on pad */
static unsigned char diacr = 0;
static char rep = 0;                     /* flag telling character repeat */
struct kbd_struct kbd_table[MAX_NR_CONSOLES];
static struct tty_struct **ttytab;
static struct kbd_struct * kbd = kbd_table;
static struct tty_struct * tty = NULL;
 
extern void compute_shiftstate(void);
 
typedef void (*k_hand)(unsigned char value, char up_flag);
typedef void (k_handfn)(unsigned char value, char up_flag);
 
static k_handfn
        do_self, do_fn, do_spec, do_pad, do_dead, do_cons, do_cur, do_shift,
        do_meta, do_ascii, do_lock, do_lowercase, do_ignore;
 
static k_hand key_handler[16] = {
        do_self, do_fn, do_spec, do_pad, do_dead, do_cons, do_cur, do_shift,
        do_meta, do_ascii, do_lock, do_lowercase,
        do_ignore, do_ignore, do_ignore, do_ignore
};
 
typedef void (*void_fnp)(void);
typedef void (void_fn)(void);
 
static void_fn do_null, enter, show_ptregs, send_intr, lastcons, caps_toggle,
        num, hold, scroll_forw, scroll_back, boot_it, caps_on, compose,
        SAK, decr_console, incr_console, spawn_console, bare_num;
 
static void_fnp spec_fn_table[] = {
        do_null,        enter,          show_ptregs,    show_mem,
        show_state,     send_intr,      lastcons,       caps_toggle,
        num,            hold,           scroll_forw,    scroll_back,
        boot_it,        caps_on,        compose,        SAK,
        decr_console,   incr_console,   spawn_console,  bare_num
};
 
/* maximum values each key_handler can handle */
const int max_vals[] = {
        255, SIZE(func_table) - 1, SIZE(spec_fn_table) - 1, NR_PAD - 1,
        NR_DEAD - 1, 255, 3, NR_SHIFT - 1,
        255, NR_ASCII - 1, NR_LOCK - 1, 255
};
 
const int NR_TYPES = SIZE(max_vals);
 
static void put_queue(int);
static unsigned char handle_diacr(unsigned char);
 
/* pt_regs - set by keyboard_interrupt(), used by show_ptregs() */
static struct pt_regs * pt_regs;
 
volatile unsigned char sunkbd_layout;
volatile unsigned char sunkbd_type;
#define SUNKBD_TYPE2        0x02
#define SUNKBD_TYPE3        0x03
#define SUNKBD_TYPE4        0x04
 
#define SUNKBD_LOUT_TYP4    0x00
#define SUNKBD_LOUT_TYP5    0x22
 
volatile int kbd_reset_pending;
volatile int kbd_layout_pending;
 
/* commands */
#define SKBDCMD_RESET       0x1
#define SKBDCMD_GLAYOUT     0xf
#define SKBDCMD_BELLON      0x2
#define SKBDCMD_BELLOFF     0x3
#define SKBDCMD_SETLED      0xe
#define SKBDCMD_NOCLICK     0xb
#define SKBDCMD_CLICK       0xa
 
static unsigned char sunkbd_clickp;
 
/* The led set commands require sending the SETLED byte then
 * a byte encoding which led's to have set.  Here are the bit
 * values, a bit set = led-on.
 */
#define LED_NLOCK           0x1   /* Num-lock */
#define LED_CMPOSE          0x2   /* Compose */
#define LED_SCRLCK          0x4   /* Scroll-lock */
#define LED_CLOCK           0x8   /* Caps-lock */
 
/* Special state characters */
#define SKBD_RESET          0xff
#define SKBD_ALLUP          0x7f
#define SKBD_LYOUT          0xfe
 
/* On the Sparc the keyboard could be one of two things.
 * It could be a real keyboard speaking over one of the
 * channels of the second zs8530 chip (other channel is
 * used by the Sun mouse).  Else we have serial console
 * going, and thus the other zs8530 chip is who we speak
 * to.  Either way, we communicate through the zs8530
 * driver for all our I/O.
 */
 
#define SUNKBD_UBIT     0x80      /* If set, key went up */
#define SUNKBD_KMASK    0x7f      /* Other bits are the keycode */
 
#define KEY_LSHIFT      0x81
#define KEY_RSHIFT      0x82
#define KEY_CONTROL     0x83
#define KEY_NILL        0x84
#define KEY_CAPSLOCK    0x85
#define KEY_ALT         0x86
#define KEY_L1          0x87
 
extern void kbd_put_char(unsigned char ch);
static inline void send_cmd(unsigned char c)
{
        kbd_put_char(c);
}
 
/* kbd_bh() calls this to send the SKBDCMD_SETLED to the sun keyboard
 * with the proper bit pattern for the leds to be set.  It basically
 * converts the kbd->ledflagstate values to corresponding sun kbd led
 * bit value.
 */
static inline unsigned char vcleds_to_sunkbd(unsigned char vcleds)
{
        unsigned char retval = 0;
 
        if(vcleds & (1<<VC_SCROLLOCK))
                retval |= LED_SCRLCK;
        if(vcleds & (1<<VC_NUMLOCK))
                retval |= LED_NLOCK;
        if(vcleds & (1<<VC_CAPSLOCK))
                retval |= LED_CLOCK;
        return retval;
}
 
/*
 * Translation of escaped scancodes to keycodes.
 * This is now user-settable.
 * The keycodes 1-88,96-111,119 are fairly standard, and
 * should probably not be changed - changing might confuse X.
 * X also interprets scancode 0x5d (KEY_Begin).
 *
 * For 1-88 keycode equals scancode.
 */
 
#define E0_KPENTER 96
#define E0_RCTRL   97
#define E0_KPSLASH 98
#define E0_PRSCR   99
#define E0_RALT    100
#define E0_BREAK   101  /* (control-pause) */
#define E0_HOME    102
#define E0_UP      103
#define E0_PGUP    104
#define E0_LEFT    105
#define E0_RIGHT   106
#define E0_END     107
#define E0_DOWN    108
#define E0_PGDN    109
#define E0_INS     110
#define E0_DEL     111
 
#define E1_PAUSE   119
 
/*
 * The keycodes below are randomly located in 89-95,112-118,120-127.
 * They could be thrown away (and all occurrences below replaced by 0),
 * but that would force many users to use the `setkeycodes' utility, where
 * they needed not before. It does not matter that there are duplicates, as
 * long as no duplication occurs for any single keyboard.
 */
#define SC_LIM 89
 
#define FOCUS_PF1 85           /* actual code! */
#define FOCUS_PF2 89
#define FOCUS_PF3 90
#define FOCUS_PF4 91
#define FOCUS_PF5 92
#define FOCUS_PF6 93
#define FOCUS_PF7 94
#define FOCUS_PF8 95
#define FOCUS_PF9 120
#define FOCUS_PF10 121
#define FOCUS_PF11 122
#define FOCUS_PF12 123
 
#define JAP_86     124
/* tfj@olivia.ping.dk:
 * The four keys are located over the numeric keypad, and are
 * labelled A1-A4. It's an rc930 keyboard, from
 * Regnecentralen/RC International, Now ICL.
 * Scancodes: 59, 5a, 5b, 5c.
 */
#define RGN1 124
#define RGN2 125
#define RGN3 126
#define RGN4 127
 
static unsigned char high_keys[128 - SC_LIM] = {
  RGN1, RGN2, RGN3, RGN4, 0, 0, 0,                   /* 0x59-0x5f */
  0, 0, 0, 0, 0, 0, 0, 0,                            /* 0x60-0x67 */
  0, 0, 0, 0, 0, FOCUS_PF11, 0, FOCUS_PF12,          /* 0x68-0x6f */
  0, 0, 0, FOCUS_PF2, FOCUS_PF9, 0, 0, FOCUS_PF3,    /* 0x70-0x77 */
  FOCUS_PF4, FOCUS_PF5, FOCUS_PF6, FOCUS_PF7,        /* 0x78-0x7b */
  FOCUS_PF8, JAP_86, FOCUS_PF10, 0                   /* 0x7c-0x7f */
};
 
/* BTC */
#define E0_MACRO   112
/* LK450 */
#define E0_F13     113
#define E0_F14     114
#define E0_HELP    115
#define E0_DO      116
#define E0_F17     117
#define E0_KPMINPLUS 118
/*
 * My OmniKey generates e0 4c for  the "OMNI" key and the
 * right alt key does nada. [kkoller@nyx10.cs.du.edu]
 */
#define E0_OK   124
/*
 * New microsoft keyboard is rumoured to have
 * e0 5b (left window button), e0 5c (right window button),
 * e0 5d (menu button). [or: LBANNER, RBANNER, RMENU]
 * [or: Windows_L, Windows_R, TaskMan]
 */
#define E0_MSLW 125
#define E0_MSRW 126
#define E0_MSTM 127
 
static unsigned char e0_keys[128] = {
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x00-0x07 */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x08-0x0f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x10-0x17 */
  0, 0, 0, 0, E0_KPENTER, E0_RCTRL, 0, 0,           /* 0x18-0x1f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x20-0x27 */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x28-0x2f */
  0, 0, 0, 0, 0, E0_KPSLASH, 0, E0_PRSCR,           /* 0x30-0x37 */
  E0_RALT, 0, 0, 0, 0, E0_F13, E0_F14, E0_HELP,           /* 0x38-0x3f */
  E0_DO, E0_F17, 0, 0, 0, 0, E0_BREAK, E0_HOME,           /* 0x40-0x47 */
  E0_UP, E0_PGUP, 0, E0_LEFT, E0_OK, E0_RIGHT, E0_KPMINPLUS, E0_END,/* 0x48-0x4f */
  E0_DOWN, E0_PGDN, E0_INS, E0_DEL, 0, 0, 0, 0,           /* 0x50-0x57 */
  0, 0, 0, E0_MSLW, E0_MSRW, E0_MSTM, 0, 0,        /* 0x58-0x5f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x60-0x67 */
  0, 0, 0, 0, 0, 0, 0, E0_MACRO,                     /* 0x68-0x6f */
  0, 0, 0, 0, 0, 0, 0, 0,                             /* 0x70-0x77 */
  0, 0, 0, 0, 0, 0, 0, 0                              /* 0x78-0x7f */
};
 
int setkeycode(unsigned int scancode, unsigned int keycode)
{
        if (scancode < SC_LIM || scancode > 255 || keycode > 127)
          return -EINVAL;
        if (scancode < 128)
          high_keys[scancode - SC_LIM] = keycode;
        else
          e0_keys[scancode - 128] = keycode;
        return 0;
}
 
int getkeycode(unsigned int scancode)
{
        return
          (scancode < SC_LIM || scancode > 255) ? -EINVAL :
          (scancode < 128) ? high_keys[scancode - SC_LIM] :
            e0_keys[scancode - 128];
}
 
void sunkbd_inchar(unsigned char ch, unsigned char status, struct pt_regs *regs);
static void keyboard_timer (unsigned long ignored);
 
static struct timer_list
auto_repeat_timer = { NULL, NULL, 0, 0, keyboard_timer };
 
/* Keeps track of the last pressed key */
static unsigned char last_keycode;
 
static void
keyboard_timer (unsigned long ignored)
{
        unsigned long flags;
 
        save_flags(flags); cli();
 
        /* Auto repeat: send regs = 0 to indicate autorepeat */
        sunkbd_inchar (last_keycode, 0, 0);
        del_timer (&auto_repeat_timer);
        auto_repeat_timer.expires = jiffies + HZ/20;
        add_timer (&auto_repeat_timer);
        restore_flags(flags);
}
 
/* #define SKBD_DEBUG */
/* This is our keyboard 'interrupt' routine. */
void sunkbd_inchar(unsigned char ch, unsigned char status, struct pt_regs *regs)
{
        unsigned char keycode;
        char up_flag;                          /* 0 or SUNKBD_UBIT */
        char raw_mode;
 
        if(ch == SKBD_RESET) {
                kbd_reset_pending = 1;
                return;
        }
        if(ch == SKBD_LYOUT) {
                kbd_layout_pending = 1;
                return;
        }
        if(kbd_reset_pending) {
                sunkbd_type = ch;
                kbd_reset_pending = 0;
                if(ch == SUNKBD_TYPE4)
                        send_cmd(SKBDCMD_GLAYOUT);
                return;
        } else if(kbd_layout_pending) {
                sunkbd_layout = ch;
                kbd_layout_pending = 0;
                return;
        } else if(ch == SKBD_ALLUP) {
                /* eat it */
                return;
        }
#ifdef SKBD_DEBUG
        if(ch == 0x7f)
                printk("KBD<ALL KEYS UP>");
        else
                printk("KBD<%x %s>", ch,
                       ((ch&0x80) ? "UP" : "DOWN"));
#endif
 
        /* Whee, a real character. */
        if (regs){
                pt_regs = regs;
                last_keycode = keycode = ch;
        } else
                keycode = ch;
 
        mark_bh(KEYBOARD_BH);
        do_poke_blanked_console = 1;
        mark_bh(CONSOLE_BH);
        kbd = kbd_table + fg_console;
        tty = ttytab[fg_console];
        if((raw_mode = (kbd->kbdmode == VC_RAW))) {
                if (kbd_redirected == fg_console+1)
                        push_kbd (keycode);
                else
                        put_queue(keycode);
                /* we do not return yet, because we want to maintain
                 * the key_down array, so that we have the correct
                 * values  when finishing RAW mode or when changing VT's.
                 */
        }
        up_flag = (keycode & SUNKBD_UBIT);  /* The 'up' bit */
        keycode &= SUNKBD_KMASK;            /* all the rest */
        del_timer (&auto_repeat_timer);
        if(up_flag) {
                rep = 0;
                clear_bit(keycode, key_down);
        } else {
                auto_repeat_timer.expires = jiffies+HZ/5;
                add_timer (&auto_repeat_timer);
                rep = set_bit(keycode, key_down);
        }
 
        if(raw_mode)
                return;
 
        if(kbd->kbdmode == VC_MEDIUMRAW) {
                put_queue(keycode + up_flag);
                return;
        }
 
        /*
         * Small change in philosophy: earlier we defined repetition by
         *       rep = keycode == prev_keycode;
         *       prev_keycode = keycode;
         * but now by the fact that the depressed key was down already.
         * Does this ever make a difference? Yes.
         */
 
        /*
         *  Repeat a key only if the input buffers are empty or the
         *  characters get echoed locally. This makes key repeat usable
         *  with slow applications and under heavy loads.
         */
        if (!rep ||
            (vc_kbd_mode(kbd,VC_REPEAT) && tty &&
             (L_ECHO(tty) || (tty->driver.chars_in_buffer(tty) == 0)))) {
                u_short keysym;
                u_char type;
 
                /* the XOR below used to be an OR */
                int shift_final = shift_state ^ kbd->lockstate;
                ushort *key_map = key_maps[shift_final];
 
                if (key_map != NULL) {
                        keysym = key_map[keycode];
                        type = KTYP(keysym);
 
                        if (type >= 0xf0) {
                            type -= 0xf0;
                            if (type == KT_LETTER) {
                                type = KT_LATIN;
                                if (vc_kbd_led(kbd, VC_CAPSLOCK)) {
                                    key_map = key_maps[shift_final ^ (1<<KG_SHIFT)];
                                    if (key_map)
                                      keysym = key_map[keycode];
                                }
                            }
                            (*key_handler[type])(keysym & 0xff, up_flag);
                            if (type != KT_SLOCK)
                              kbd->slockstate = 0;
                        }
                } else {
                        /* maybe beep? */
                        /* we have at least to update shift_state */
                        compute_shiftstate();
                }
        }
}
 
static void put_queue(int ch)
{
        wake_up(&keypress_wait);
        if (tty) {
                tty_insert_flip_char(tty, ch, 0);
                tty_schedule_flip(tty);
        }
}
 
static void puts_queue(char *cp)
{
        wake_up(&keypress_wait);
        if (!tty)
                return;
 
        while (*cp) {
                tty_insert_flip_char(tty, *cp, 0);
                cp++;
        }
        tty_schedule_flip(tty);
}
 
static void applkey(int key, char mode)
{
        static char buf[] = { 0x1b, 'O', 0x00, 0x00 };
 
        buf[1] = (mode ? 'O' : '[');
        buf[2] = key;
        puts_queue(buf);
}
 
static void enter(void)
{
        put_queue(13);
        if (vc_kbd_mode(kbd,VC_CRLF))
                put_queue(10);
}
 
static void caps_toggle(void)
{
        if (rep)
                return;
        chg_vc_kbd_led(kbd, VC_CAPSLOCK);
}
 
static void caps_on(void)
{
        if (rep)
                return;
        set_vc_kbd_led(kbd, VC_CAPSLOCK);
}
 
static void show_ptregs(void)
{
        if (pt_regs)
                show_regs(pt_regs);
}
 
static void hold(void)
{
        if (rep || !tty)
                return;
 
        /*
         * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty);
         * these routines are also activated by ^S/^Q.
         * (And SCROLLOCK can also be set by the ioctl KDSKBLED.)
         */
        if (tty->stopped)
                start_tty(tty);
        else
                stop_tty(tty);
}
 
static void num(void)
{
        if (vc_kbd_mode(kbd,VC_APPLIC))
                applkey('P', 1);
        else
                bare_num();
}
 
/*
 * Bind this to Shift-NumLock if you work in application keypad mode
 * but want to be able to change the NumLock flag.
 * Bind this to NumLock if you prefer that the NumLock key always
 * changes the NumLock flag.
 */
static void bare_num(void)
{
        if (!rep)
                chg_vc_kbd_led(kbd,VC_NUMLOCK);
}
 
static void lastcons(void)
{
        /* switch to the last used console, ChN */
        set_console(last_console);
}
 
static void decr_console(void)
{
        int i;
 
        for (i = fg_console-1; i != fg_console; i--) {
                if (i == -1)
                        i = MAX_NR_CONSOLES-1;
                if (vc_cons_allocated(i))
                        break;
        }
        set_console(i);
}
 
static void incr_console(void)
{
        int i;
 
        for (i = fg_console+1; i != fg_console; i++) {
                if (i == MAX_NR_CONSOLES)
                        i = 0;
                if (vc_cons_allocated(i))
                        break;
        }
        set_console(i);
}
 
static void send_intr(void)
{
        if (!tty)
                return;
        tty_insert_flip_char(tty, 0, TTY_BREAK);
        tty_schedule_flip(tty);
}
 
static void scroll_forw(void)
{
        scrollfront(0);
}
 
static void scroll_back(void)
{
        scrollback(0);
}
 
static void boot_it(void)
{
        extern int obp_system_intr(void);
 
        if (!obp_system_intr())
                ctrl_alt_del();
        /* sigh.. attempt to prevent multiple entry */
        last_keycode=1;
        rep = 0;
}
 
static void compose(void)
{
        dead_key_next = 1;
}
 
int spawnpid, spawnsig;
 
static void spawn_console(void)
{
        if (spawnpid)
           if(kill_proc(spawnpid, spawnsig, 1))
             spawnpid = 0;
}
 
static void SAK(void)
{
        do_SAK(tty);
#if 0
        /*
         * Need to fix SAK handling to fix up RAW/MEDIUM_RAW and
         * vt_cons modes before we can enable RAW/MEDIUM_RAW SAK
         * handling.
         *
         * We should do this some day --- the whole point of a secure
         * attention key is that it should be guaranteed to always
         * work.
         */
        reset_vc(fg_console);
        do_unblank_screen();    /* not in interrupt routine? */
#endif
}
 
static void do_ignore(unsigned char value, char up_flag)
{
}
 
static void do_null()
{
        compute_shiftstate();
}
 
static void do_spec(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
        if (value >= SIZE(spec_fn_table))
                return;
        spec_fn_table[value]();
}
 
static void do_lowercase(unsigned char value, char up_flag)
{
        printk("keyboard.c: do_lowercase was called - impossible\n");
}
 
static void do_self(unsigned char value, char up_flag)
{
        if (up_flag)
                return;         /* no action, if this is a key release */
 
        if (diacr)
                value = handle_diacr(value);
 
        if (dead_key_next) {
                dead_key_next = 0;
                diacr = value;
                return;
        }
 
        put_queue(value);
}
 
#define A_GRAVE  '`'
#define A_ACUTE  '\''
#define A_CFLEX  '^'
#define A_TILDE  '~'
#define A_DIAER  '"'
#define A_CEDIL  ','
static unsigned char ret_diacr[NR_DEAD] =
        {A_GRAVE, A_ACUTE, A_CFLEX, A_TILDE, A_DIAER, A_CEDIL };
 
/* If a dead key pressed twice, output a character corresponding to it, */
/* otherwise just remember the dead key.                                */
 
static void do_dead(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
 
        value = ret_diacr[value];
        if (diacr == value) {   /* pressed twice */
                diacr = 0;
                put_queue(value);
                return;
        }
        diacr = value;
}
 
 
/* If space is pressed, return the character corresponding the pending  */
/* dead key, otherwise try to combine the two.                          */
 
unsigned char handle_diacr(unsigned char ch)
{
        int d = diacr;
        int i;
 
        diacr = 0;
        if (ch == ' ')
                return d;
 
        for (i = 0; i < accent_table_size; i++) {
                if (accent_table[i].diacr == d && accent_table[i].base == ch)
                        return accent_table[i].result;
        }
 
        put_queue(d);
        return ch;
}
 
static void do_cons(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
        want_console = value;
}
 
static void do_fn(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
        if (value < SIZE(func_table)) {
                if (func_table[value])
                        puts_queue(func_table[value]);
        } else
                printk("do_fn called with value=%d\n", value);
}
 
static void do_pad(unsigned char value, char up_flag)
{
        static const char *pad_chars = "0123456789+-*/\015,.?";
        static const char *app_map = "pqrstuvwxylSRQMnn?";
 
        if (up_flag)
                return;         /* no action, if this is a key release */
 
        /* kludge... shift forces cursor/number keys */
        if (vc_kbd_mode(kbd,VC_APPLIC) && !k_down[KG_SHIFT]) {
                applkey(app_map[value], 1);
                return;
        }
 
        if (!vc_kbd_led(kbd,VC_NUMLOCK))
                switch (value) {
                        case KVAL(K_PCOMMA):
                        case KVAL(K_PDOT):
                                do_fn(KVAL(K_REMOVE), 0);
                                return;
                        case KVAL(K_P0):
                                do_fn(KVAL(K_INSERT), 0);
                                return;
                        case KVAL(K_P1):
                                do_fn(KVAL(K_SELECT), 0);
                                return;
                        case KVAL(K_P2):
                                do_cur(KVAL(K_DOWN), 0);
                                return;
                        case KVAL(K_P3):
                                do_fn(KVAL(K_PGDN), 0);
                                return;
                        case KVAL(K_P4):
                                do_cur(KVAL(K_LEFT), 0);
                                return;
                        case KVAL(K_P6):
                                do_cur(KVAL(K_RIGHT), 0);
                                return;
                        case KVAL(K_P7):
                                do_fn(KVAL(K_FIND), 0);
                                return;
                        case KVAL(K_P8):
                                do_cur(KVAL(K_UP), 0);
                                return;
                        case KVAL(K_P9):
                                do_fn(KVAL(K_PGUP), 0);
                                return;
                        case KVAL(K_P5):
                                applkey('G', vc_kbd_mode(kbd, VC_APPLIC));
                                return;
                }
 
        put_queue(pad_chars[value]);
        if (value == KVAL(K_PENTER) && vc_kbd_mode(kbd, VC_CRLF))
                put_queue(10);
}
 
static void do_cur(unsigned char value, char up_flag)
{
        static const char *cur_chars = "BDCA";
        if (up_flag)
                return;
 
        applkey(cur_chars[value], vc_kbd_mode(kbd,VC_CKMODE));
}
 
static void do_shift(unsigned char value, char up_flag)
{
        int old_state = shift_state;
 
        if (rep)
                return;
 
        /* Mimic typewriter:
           a CapsShift key acts like Shift but undoes CapsLock */
        if (value == KVAL(K_CAPSSHIFT)) {
                value = KVAL(K_SHIFT);
                if (!up_flag)
                        clr_vc_kbd_led(kbd, VC_CAPSLOCK);
        }
 
        if (up_flag) {
                /* handle the case that two shift or control
                   keys are depressed simultaneously */
                if (k_down[value])
                        k_down[value]--;
        } else
                k_down[value]++;
 
        if (k_down[value])
                shift_state |= (1 << value);
        else
                shift_state &= ~ (1 << value);
 
        /* kludge, no joke... */
        if (up_flag && shift_state != old_state && npadch != -1) {
                put_queue(npadch & 0xff);
                npadch = -1;
        }
}
 
/* called after returning from RAW mode or when changing consoles -
   recompute k_down[] and shift_state from key_down[] */
/* maybe called when keymap is undefined, so that shiftkey release is seen */
void compute_shiftstate(void)
{
        int i, j, k, sym, val;
 
        shift_state = 0;
        for(i=0; i < SIZE(k_down); i++)
          k_down[i] = 0;
 
        for(i=0; i < SIZE(key_down); i++)
          if(key_down[i]) {     /* skip this word if not a single bit on */
            k = i*BITS_PER_LONG;
            for(j=0; j<BITS_PER_LONG; j++,k++)
              if(test_bit(k, key_down)) {
                sym = U(plain_map[k]);
                if(KTYP(sym) == KT_SHIFT) {
                  val = KVAL(sym);
                  if (val == KVAL(K_CAPSSHIFT))
                    val = KVAL(K_SHIFT);
                  k_down[val]++;
                  shift_state |= (1<<val);
                }
              }
          }
}
 
static void do_meta(unsigned char value, char up_flag)
{
        if (up_flag)
                return;
 
        if (vc_kbd_mode(kbd, VC_META)) {
                put_queue('\033');
                put_queue(value);
        } else
                put_queue(value | 0x80);
}
 
static void do_ascii(unsigned char value, char up_flag)
{
        int base;
 
        if (up_flag)
                return;
 
        if (value < 10)    /* decimal input of code, while Alt depressed */
            base = 10;
        else {       /* hexadecimal input of code, while AltGr depressed */
            value -= 10;
            base = 16;
        }
 
        if (npadch == -1)
          npadch = value;
        else
          npadch = npadch * base + value;
}
 
static void do_lock(unsigned char value, char up_flag)
{
        if (up_flag || rep)
                return;
        chg_vc_kbd_lock(kbd, value);
}
 
/*
 * The leds display either (i) the status of NumLock, CapsLock, ScrollLock,
 * or (ii) whatever pattern of lights people want to show using KDSETLED,
 * or (iii) specified bits of specified words in kernel memory.
 */
 
static unsigned char ledstate = 0xff; /* undefined */
static unsigned char ledioctl;
 
unsigned char getledstate(void) {
    return ledstate;
}
 
void setledstate(struct kbd_struct *kbd, unsigned int led) {
    if (!(led & ~7)) {
        ledioctl = led;
        kbd->ledmode = LED_SHOW_IOCTL;
    } else
        kbd->ledmode = LED_SHOW_FLAGS;
    set_leds();
}
 
static struct ledptr {
    unsigned int *addr;
    unsigned int mask;
    unsigned char valid:1;
} ledptrs[3];
 
void register_leds(int console, unsigned int led,
                   unsigned int *addr, unsigned int mask) {
    struct kbd_struct *kbd = kbd_table + console;
    if (led < 3) {
        ledptrs[led].addr = addr;
        ledptrs[led].mask = mask;
        ledptrs[led].valid = 1;
        kbd->ledmode = LED_SHOW_MEM;
    } else
        kbd->ledmode = LED_SHOW_FLAGS;
}
 
static inline unsigned char getleds(void){
    struct kbd_struct *kbd = kbd_table + fg_console;
    unsigned char leds;
 
    if (kbd->ledmode == LED_SHOW_IOCTL)
      return ledioctl;
    leds = kbd->ledflagstate;
    if (kbd->ledmode == LED_SHOW_MEM) {
        if (ledptrs[0].valid) {
            if (*ledptrs[0].addr & ledptrs[0].mask)
              leds |= 1;
            else
              leds &= ~1;
        }
        if (ledptrs[1].valid) {
            if (*ledptrs[1].addr & ledptrs[1].mask)
              leds |= 2;
            else
              leds &= ~2;
        }
        if (ledptrs[2].valid) {
            if (*ledptrs[2].addr & ledptrs[2].mask)
              leds |= 4;
            else
              leds &= ~4;
        }
    }
    return leds;
}
 
/*
 * This routine is the bottom half of the keyboard interrupt
 * routine, and runs with all interrupts enabled. It does
 * console changing, led setting and copy_to_cooked, which can
 * take a reasonably long time.
 *
 * Aside from timing (which isn't really that important for
 * keyboard interrupts as they happen often), using the software
 * interrupt routines for this thing allows us to easily mask
 * this when we don't want any of the above to happen. Not yet
 * used, but this allows for easy and efficient race-condition
 * prevention later on.
 */
static void kbd_bh(void)
{
        unsigned char leds = getleds();
 
        if (leds != ledstate) {
                ledstate = leds;
                send_cmd(SKBDCMD_SETLED);
                send_cmd(vcleds_to_sunkbd(leds));
        }
}
 
int kbd_init(void)
{
        int i, opt_node;
        struct kbd_struct kbd0;
        extern struct tty_driver console_driver;
 
        kbd0.ledflagstate = kbd0.default_ledflagstate = KBD_DEFLEDS;
        kbd0.ledmode = LED_SHOW_FLAGS;
        kbd0.lockstate = KBD_DEFLOCK;
        kbd0.modeflags = KBD_DEFMODE;
        kbd0.kbdmode = VC_XLATE;
 
        for (i = 0 ; i < MAX_NR_CONSOLES ; i++)
                kbd_table[i] = kbd0;
 
        ttytab = console_driver.table;
 
        /* XXX Check keyboard-click? property in 'options' PROM node XXX */
        if(sparc_cpu_model != sun4) {
                opt_node = prom_getchild(prom_root_node);
                opt_node = prom_searchsiblings(opt_node, "options");
                i = prom_getintdefault(opt_node, "keyboard-click?", -1);
                if(i != -1)
                        sunkbd_clickp = 1;
                else
                        sunkbd_clickp = 0;
        } else {
                sunkbd_clickp = 0;
        }
        init_bh(KEYBOARD_BH, kbd_bh);
        mark_bh(KEYBOARD_BH);
        return 0;
}
 
/* /dev/kbd support */
 
#define KBD_QSIZE 32
static Firm_event kbd_queue [KBD_QSIZE];
static int kbd_head, kbd_tail;
char kbd_opened;
static struct wait_queue *kbd_wait;
static struct fasync_struct *kb_fasync;
 
void
push_kbd (int scan)
{
        int next = (kbd_head + 1) % KBD_QSIZE;
 
        if (scan == KBD_IDLE)
                return;
        if (next != kbd_tail){
                kbd_queue [kbd_head].id = scan & KBD_KEYMASK;
                kbd_queue [kbd_head].value=scan & KBD_UP ? VKEY_UP : VKEY_DOWN;
                kbd_queue [kbd_head].time = xtime;
                kbd_head = next;
        }
        if (kb_fasync)
                kill_fasync (kb_fasync, SIGIO);
        wake_up_interruptible (&kbd_wait);
}
 
static int
kbd_read (struct inode *inode, struct file *f, char *buffer, int count)
{
        struct wait_queue wait = { current, NULL };
        char *end, *p;
 
        /* Return EWOULDBLOCK, because this is what the X server expects */
        if (kbd_head == kbd_tail){
                if (f->f_flags & O_NONBLOCK)
                        return -EWOULDBLOCK;
                add_wait_queue (&kbd_wait, &wait);
                while (kbd_head == kbd_tail && !(current->signal & ~current->blocked)){
                        current->state = TASK_INTERRUPTIBLE;
                        schedule ();
                }
                current->state = TASK_RUNNING;
                remove_wait_queue (&kbd_wait, &wait);
        }
        /* There is data in the keyboard, fill the user buffer */
        end = buffer+count;
        p = buffer;
        for (; p < end && kbd_head != kbd_tail; p += sizeof (Firm_event)){
                *(Firm_event *)p = kbd_queue [kbd_tail];
#ifdef KBD_DEBUG
                printk ("[%s]", kbd_queue [kbd_tail].value == VKEY_UP ? "UP" : "DOWN");
#endif
                kbd_tail++;
                kbd_tail %= KBD_QSIZE;
        }
        return p-buffer;
}
 
/* Needed by X */
static int
kbd_fasync (struct inode *inode, struct file *filp, int on)
{
        int retval;
 
        retval = fasync_helper (inode, filp, on, &kb_fasync);
        if (retval < 0)
                return retval;
        return 0;
}
 
static int
kbd_select (struct inode *i, struct file *f, int sel_type, select_table *wait)
{
        if (sel_type != SEL_IN)
                return 0;
        if (kbd_head != kbd_tail)
                return 1;
        select_wait (&kbd_wait, wait);
        return 0;
}
 
static int
kbd_ioctl (struct inode *i, struct file *f, unsigned int cmd, unsigned long arg)
{
        switch (cmd){
        case KIOCTYPE:            /* return keyboard type */
                if (verify_area (VERIFY_WRITE, (void *)arg, sizeof (int)))
                        return -EFAULT;
                *(int *) arg = sunkbd_type;
                break;
        case KIOCGTRANS:
                if (verify_area (VERIFY_WRITE, (void *) arg, sizeof (int)))
                        return -EFAULT;
                *(int *) arg = TR_UNTRANS_EVENT;
                break;
        case KIOCTRANS:
                if (verify_area (VERIFY_READ, (void *) arg, sizeof (int)))
                        return -EFAULT;
                if (*(int *) arg != TR_UNTRANS_EVENT)
                        return -EINVAL;
                break;
        case KIOCLAYOUT:
                if (verify_area (VERIFY_WRITE, (void *) arg, sizeof (int)))
                        return -EFAULT;
                *(int *) arg = sunkbd_layout;
                break;
        case KIOCSDIRECT:
                if (verify_area (VERIFY_WRITE, (void *) arg, sizeof (int)))
                        return -EFAULT;
#ifndef CODING_NEW_DRIVER
                if (*(int *) arg)
                        kbd_redirected = fg_console + 1;
                else
                        kbd_redirected = 0;
                kbd_table [fg_console].kbdmode = kbd_redirected ? VC_RAW : VC_XLATE;
#endif
                break;
        case KIOCCMD:
                /* Need to support beep on/off, keyclick on/off */
                return 0;
        case FIONREAD:          /* return number of bytes in kbd queue */
        {
                int count;
 
                if (verify_area (VERIFY_WRITE, (void *) arg, sizeof (int)))
                        return -EFAULT;
                count = kbd_head - kbd_tail;
                * (int *)arg = (count < 0) ? KBD_QSIZE - count : count;
                return 0;
        }
        default:
                printk ("Unknown Keyboard ioctl: %8.8x\n", cmd);
                return -EINVAL;
        }
        return 0;
}
 
static int
kbd_open (struct inode *i, struct file *f)
{
        if (kbd_opened)
                return 0;
        kbd_opened = fg_console + 1;
        kbd_head = kbd_tail = 0;
        return 0;
}
 
static void
kbd_close (struct inode *i, struct file *f)
{
        if (kbd_redirected)
                kbd_table [kbd_opened-1].kbdmode = VC_XLATE;
        kbd_redirected = 0;
        kbd_opened = 0;
 
        kbd_fasync (i, f, 0);
}
 
static struct
file_operations kbd_fops =
{
        NULL,                   /* seek */
        kbd_read,               /* read */
        NULL,                   /* write */
        NULL,                   /* readdir */
        kbd_select,             /* select */
        kbd_ioctl,              /* ioctl */
        NULL,                   /* mmap */
        kbd_open,               /* open */
        kbd_close,              /* close */
        NULL,                   /* fsync */
        kbd_fasync,             /* fasync */
        NULL,                   /* check_media_change */
        NULL,                   /* revalidate */
};
 
void
keyboard_zsinit(void)
{
        int timeout = 0;
 
        /* Test out the leds */
        sunkbd_type = 255;
        send_cmd(SKBDCMD_RESET);
        while((sunkbd_type==255) && timeout < 500000) {
                udelay(100);
                timeout += 20;
        }
 
        if(timeout>=500000) {
                printk("keyboard: not present\n");
                return;
        }
 
        if(sunkbd_type != SUNKBD_TYPE4) {
                printk("Sun TYPE %d keyboard detected ", sunkbd_type);
        } else {
                udelay(200);
                timeout=0;
                while(timeout++ < 500000)
                        barrier();
                printk("Sun TYPE %d keyboard detected ",
                       ((sunkbd_layout==SUNKBD_LOUT_TYP5) ? 5 : 4));
        }
        if(sunkbd_type == SUNKBD_TYPE2)
                sunkbd_clickp = 0;
 
        if(sunkbd_clickp)
                printk("with keyclick\n");
        else
                printk("without keyclick\n");
 
        /* Dork with led lights, then turn them all off */
        send_cmd(SKBDCMD_SETLED); send_cmd(0xf); /* All on */
        send_cmd(SKBDCMD_SETLED); send_cmd(0x0); /* All off */
 
        /* Register the /dev/kbd interface */
        if (register_chrdev (KBD_MAJOR, "kbd", &kbd_fops)){
                printk ("Could not register /dev/kbd device\n");
                return;
        }
        return;
}
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [sbus/] [char/] [sunkbd.c] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1626	jcastillo	`/* keyboard.c: Sun keyboard driver.`
2			`*`
3			`* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)`
4			`* Added vuid event generation and /dev/kbd device for SunOS`
5			`* compatibility - Miguel (miguel@nuclecu.unam.mx)`
6			`*/`
7
8			`#include <linux/kernel.h>`
9			`#include <linux/sched.h>`
10			`#include <linux/tty.h>`
11			`#include <linux/tty_flip.h>`
12			`#include <linux/mm.h>`
13			`#include <linux/ptrace.h>`
14			`#include <linux/signal.h>`
15			`#include <linux/string.h>`
16			`#include <linux/fcntl.h>`
17			`#include <asm/kbio.h>`
18			`#include <asm/vuid_event.h>`
19			`#include <asm/delay.h>`
20			`#include <asm/bitops.h>`
21			`#include <asm/oplib.h>`
22
23			`#include "../../char/kbd_kern.h"`
24			`#include "../../char/diacr.h"`
25			`#include "../../char/vt_kern.h"`
26
27			`#define SIZE(x) (sizeof(x)/sizeof((x)[0]))`
28
29			`/* Define this one if you are making a new frame buffer driver */`
30			`/* it will not block the keyboard */`
31			`/* #define CODING_NEW_DRIVER */`
32
33			`/* KBD device number, temporal */`
34			`#define KBD_MAJOR 11`
35
36			`#define KBD_REPORT_ERR`
37			`#define KBD_REPORT_UNKN`
38
39			`#ifndef KBD_DEFMODE`
40			`#define KBD_DEFMODE ((1 << VC_REPEAT) \| (1 << VC_META))`