URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [Makefile] - Blame information for rev 1765

Details | Compare with Previous | View Log


 
# Makefile for linux/drivers/scsi
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
 
ifdef CONFIG_KERNEL_ELF
# This is used for ELF - it needs to migrate or be moved.
LD_RFLAG = -m elf_i386
endif
 
L_TARGET := scsi.a
L_OBJS   :=
M_OBJS   :=
MX_OBJS  :=
MOD_LIST_NAME := SCSI_MODULES
SCSI_SRCS = $(wildcard $(L_OBJS:%.o=%.c))
 
AHA152X = -DDEBUG_AHA152X -DAUTOCONF
GDTH = #-DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
 
.SUFFIXES:
.SUFFIXES: .c .o .h .a
 
ifeq (${CFLAGS},)
CFLAGS = -D__KERNEL__=1 \
        -DMODULE -Wall -Wstrict-prototypes -I. -I../../include \
        -O2 -fomit-frame-pointer -m486
 
include ../../.config
 
TOPDIR = ../..
 
endif
 
ifeq ($(CONFIG_SCSI),y)
L_OBJS += hosts.o scsi.o scsi_ioctl.o constants.o scsicam.o
  ifeq ($(CONFIG_PROC_FS),y)
    L_OBJS += scsi_proc.o
  endif
LX_OBJS += scsi_syms.o
else
  ifeq ($(CONFIG_SCSI),m)
    MX_OBJS += scsi_syms.o
    M_OBJS += scsi_mod.o
  endif
endif
 
ifeq ($(CONFIG_CHR_DEV_ST),y)
L_OBJS += st.o
else
  ifeq ($(CONFIG_CHR_DEV_ST),m)
  M_OBJS += st.o
  endif
endif
 
ifeq ($(CONFIG_BLK_DEV_SD),y)
L_OBJS += sd.o sd_ioctl.o
else
  ifeq ($(CONFIG_BLK_DEV_SD),m)
  M_OBJS += sd_mod.o
  endif
endif
 
ifeq ($(CONFIG_BLK_DEV_SR),y)
L_OBJS += sr.o sr_ioctl.o
else
  ifeq ($(CONFIG_BLK_DEV_SR),m)
  M_OBJS += sr_mod.o
  endif
endif
 
ifeq ($(CONFIG_CHR_DEV_SG),y)
L_OBJS += sg.o
else
  ifeq ($(CONFIG_CHR_DEV_SG),m)
  M_OBJS += sg.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_ADVANSYS),y)
L_OBJS += advansys.o
else
  ifeq ($(CONFIG_SCSI_ADVANSYS),m)
  M_OBJS += advansys.o
  endif
endif
 
ifeq ($(CONFIG_A3000_SCSI),y)
L_OBJS += a3000.o wd33c93.o
else
  ifeq ($(CONFIG_A3000_SCSI),m)
  M_OBJS += a3000.o wd33c93.o
  endif
endif
 
ifeq ($(CONFIG_A2091_SCSI),y)
L_OBJS += a2091.o wd33c93.o
else
  ifeq ($(CONFIG_A2091_SCSI),m)
  M_OBJS += a2091.o wd33c93.o
  endif
endif
 
ifeq ($(CONFIG_GVP11_SCSI),y)
L_OBJS += gvp11.o wd33c93.o
else
  ifeq ($(CONFIG_GVP11_SCSI),m)
  M_OBJS += gvp11.o wd33c93.o
  endif
endif
 
ifeq ($(CONFIG_ATARI_SCSI),y)
L_OBJS += atari_scsi.o
else
  ifeq ($(CONFIG_ATARI_SCSI),m)
  M_OBJS += atari_scsi.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_PPA),y)
L_OBJS += ppa.o
else
  ifeq ($(CONFIG_SCSI_PPA),m)
  M_OBJS += ppa.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_QLOGIC_FAS),y)
L_OBJS += qlogicfas.o
else
  ifeq ($(CONFIG_SCSI_QLOGIC_FAS),m)
  M_OBJS += qlogicfas.o
  endif
endif
 
 
ifeq ($(CONFIG_SCSI_QLOGIC_ISP),y)
L_OBJS += qlogicisp.o
else
  ifeq ($(CONFIG_SCSI_QLOGIC_ISP),m)
  M_OBJS += qlogicisp.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_ACARD),y)
L_OBJS += atp870u.o
else
  ifeq ($(CONFIG_SCSI_ACARD),m)
  M_OBJS += atp870u.o
  endif
endif
 
 
ifeq ($(CONFIG_SCSI_INITIO),y)
L_OBJS += initio.o
else
  ifeq ($(CONFIG_SCSI_INITIO),m)
  M_OBJS += initio.o
  endif
endif
 
 
ifeq ($(CONFIG_SCSI_AHA152X),y)
L_OBJS += aha152x.o
else
  ifeq ($(CONFIG_SCSI_AHA152X),m)
  M_OBJS += aha152x.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_AHA1542),y)
L_OBJS += aha1542.o
else
  ifeq ($(CONFIG_SCSI_AHA1542),m)
  M_OBJS += aha1542.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_AHA1740),y)
L_OBJS += aha1740.o
else
  ifeq ($(CONFIG_SCSI_AHA1740),m)
  M_OBJS += aha1740.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_AIC7XXX),y)
L_OBJS += aic7xxx.o
else
  ifeq ($(CONFIG_SCSI_AIC7XXX),m)
  M_OBJS += aic7xxx.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_DC390T),y)
L_OBJS += tmscsim.o
else
  ifeq ($(CONFIG_SCSI_DC390T),m)
  M_OBJS += tmscsim.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_AM53C974),y)
L_OBJS += AM53C974.o
else
  ifeq ($(CONFIG_SCSI_AM53C974),m)
  M_OBJS += AM53C974.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_BUSLOGIC),y)
L_OBJS += BusLogic.o
else
  ifeq ($(CONFIG_SCSI_BUSLOGIC),m)
  M_OBJS += BusLogic.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_EATA_DMA),y)
L_OBJS += eata_dma.o
else
  ifeq ($(CONFIG_SCSI_EATA_DMA),m)
  M_OBJS += eata_dma.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_EATA_PIO),y)
L_OBJS += eata_pio.o
else
  ifeq ($(CONFIG_SCSI_EATA_PIO),m)
  M_OBJS += eata_pio.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_U14_34F),y)
L_OBJS += u14-34f.o
else
  ifeq ($(CONFIG_SCSI_U14_34F),m)
  M_OBJS += u14-34f.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_SUNESP),y)
L_OBJS += esp.o
else
  ifeq ($(CONFIG_SCSI_SUNESP),m)
  M_OBJS += esp.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_GDTH),y)
L_OBJS += gdth.o
else
  ifeq ($(CONFIG_SCSI_GDTH),m)
  M_OBJS += gdth.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_DEBUG),y)
L_OBJS += scsi_debug.o
else
  ifeq ($(CONFIG_SCSI_DEBUG),m)
  M_OBJS += scsi_debug.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_FUTURE_DOMAIN),y)
L_OBJS += fdomain.o
else
  ifeq ($(CONFIG_SCSI_FUTURE_DOMAIN),m)
  M_OBJS += fdomain.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_IN2000),y)
L_OBJS += in2000.o
else
  ifeq ($(CONFIG_SCSI_IN2000),m)
  M_OBJS += in2000.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_GENERIC_NCR5380),y)
L_OBJS += g_NCR5380.o
else
  ifeq ($(CONFIG_SCSI_GENERIC_NCR5380),m)
  M_OBJS += g_NCR5380.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_NCR53C7xx),y)
L_OBJS += 53c7,8xx.o
else
  ifeq ($(CONFIG_SCSI_NCR53C7xx),m)
  M_OBJS += 53c7,8xx.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_NCR53C8XX),y)
L_OBJS += ncr53c8xx.o
else
  ifeq ($(CONFIG_SCSI_NCR53C8XX),m)
  M_OBJS += ncr53c8xx.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_PAS16),y)
L_OBJS += pas16.o
else
  ifeq ($(CONFIG_SCSI_PAS16),m)
  M_OBJS += pas16.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_SEAGATE),y)
L_OBJS += seagate.o
else
  ifeq ($(CONFIG_SCSI_SEAGATE),m)
  M_OBJS += seagate.o
  endif
endif
ifndef CONFIG_SCSI_SEAGATE
  ifeq ($(CONFIG_SCSI_FD_8xx),y)
  L_OBJS += seagate.o
  else
    ifeq ($(CONFIG_SCSI_FD_8xx),m)
    M_OBJS += seagate.o
    endif
  endif
endif
 
ifeq ($(CONFIG_SCSI_7000FASST),y)
L_OBJS += wd7000.o
else
  ifeq ($(CONFIG_SCSI_7000FASST),m)
  M_OBJS += wd7000.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_T128),y)
L_OBJS += t128.o
else
  ifeq ($(CONFIG_SCSI_T128),m)
  M_OBJS += t128.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_DTC3280),y)
L_OBJS += dtc.o
else
  ifeq ($(CONFIG_SCSI_DTC3280),m)
  M_OBJS += dtc.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_ULTRASTOR),y)
L_OBJS += ultrastor.o
else
  ifeq ($(CONFIG_SCSI_ULTRASTOR),m)
  M_OBJS += ultrastor.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_EATA),y)
L_OBJS += eata.o
else
  ifeq ($(CONFIG_SCSI_EATA),m)
  M_OBJS += eata.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_NCR53C406A),y)
L_OBJS += NCR53c406a.o
else
  ifeq ($(CONFIG_SCSI_NCR53C406A),m)
  M_OBJS += NCR53c406a.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_SYM53C416),y)
L_OBJS += sym53c416.o
else
  ifeq ($(CONFIG_SCSI_SYM53C416),m)
  M_OBJS += sym53c416.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_TC2550),y)
L_OBJS += tripace.o
else
  ifeq ($(CONFIG_SCSI_TC2550),m)
  M_OBJS += tripace.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_MEGARAID),y)
L_OBJS += megaraid.o
else
  ifeq ($(CONFIG_SCSI_MEGARAID),m)
  M_OBJS += megaraid.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_INIA100),y)
L_OBJS += a100u2w.o
else
  ifeq ($(CONFIG_SCSI_INIA100),m)
  M_OBJS += a100u2w.o
  endif
endif
 
ifeq ($(CONFIG_SCSI_PCI2000),y)
L_OBJS += pci2000.o
else
    ifeq ($(CONFIG_SCSI_PCI2000),m)
    M_OBJS += pci2000.o
    endif
endif
 
ifeq ($(CONFIG_SCSI_PCI2220I),y)
L_OBJS += pci2220i.o
else
    ifeq ($(CONFIG_SCSI_PCI2220I),m)
    M_OBJS += pci2220i.o
    endif
endif
 
ifeq ($(CONFIG_SCSI_PSI240I),y)
L_OBJS += psi240i.o
else
    ifeq ($(CONFIG_SCSI_PSI240I),m)
    M_OBJS += psi240i.o
    endif
endif
 
ifeq ($(CONFIG_BLK_DEV_IDESCSI),y)
L_OBJS += ide-scsi.o
endif
 
include $(TOPDIR)/Rules.make
 
aha152x.o: aha152x.c
        $(CC) $(CFLAGS) $(AHA152X) -c aha152x.c
 
gdth.o: gdth.c gdth.h gdth_proc.c gdth_proc.h
        $(CC) $(CFLAGS) $(GDTH) -c gdth.c
 
aic7xxx.o: aic7xxx.c aic7xxx_seq.c aic7xxx_reg.h
        $(CC) $(CFLAGS) -c -o $@ aic7xxx.c
 
seagate.o: seagate.c
        $(CC) $(CFLAGS) -DARBITRATE -DSLOW_HANDSHAKE -DFAST32 -c seagate.c
 
tmscsim.o : tmscsim.c
        $(CC) $(CFLAGS) -c tmscsim.c
 
53c8xx_d.h 53c8xx_u.h : 53c7,8xx.scr script_asm.pl
        ln -sf 53c7,8xx.scr fake.c
        $(CPP) -traditional -DCHIP=810 fake.c | grep -v '^#' | perl script_asm.pl
        mv script.h 53c8xx_d.h
        mv scriptu.h 53c8xx_u.h
        rm fake.c
 
g_NCR5380.o: g_NCR5380.c
        $(CC) $(CFLAGS) -DGENERIC_NCR5380_OVERRIDE="{{(NCR5380_map_type)0x350,5,0, BOARD_NCR53C400}};" -c g_NCR5380.c
 
initio.o: ini9100u.o i91uscsi.o
        $(LD) -r -o initio.o ini9100u.o i91uscsi.o
 
megaraid.o: megaraid.c
        $(CC) $(CFLAGS) -c megaraid.c
 
a100u2w.o: inia100.o i60uscsi.o
        $(LD) -r -o a100u2w.o inia100.o i60uscsi.o
 
scsi_mod.o: $(MX_OBJS) hosts.o scsi.o scsi_ioctl.o constants.o \
                scsicam.o scsi_proc.o
        $(LD) $(LD_RFLAG) -r -o $@ $(MX_OBJS) hosts.o scsi.o scsi_ioctl.o constants.o scsicam.o scsi_proc.o
 
sr_mod.o: sr.o sr_ioctl.o
        $(LD) $(LD_RFLAG) -r -o $@ sr.o sr_ioctl.o
 
sd_mod.o: sd.o sd_ioctl.o
        $(LD) $(LD_RFLAG) -r -o $@ sd.o sd_ioctl.o

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [Makefile] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1626	jcastillo
2			`# Makefile for linux/drivers/scsi`
3			`#`
4			`# Note! Dependencies are done automagically by 'make dep', which also`
5			`# removes any old dependencies. DON'T put your own dependencies here`
6			`# unless it's something special (ie not a .c file).`
7			`#`
8
9			`ifdef CONFIG_KERNEL_ELF`
10			`# This is used for ELF - it needs to migrate or be moved.`
11			`LD_RFLAG = -m elf_i386`
12			`endif`
13
14			`L_TARGET := scsi.a`
15			`L_OBJS :=`
16			`M_OBJS :=`
17			`MX_OBJS :=`
18			`MOD_LIST_NAME := SCSI_MODULES`
19			`SCSI_SRCS = $(wildcard $(L_OBJS:%.o=%.c))`
20
21			`AHA152X = -DDEBUG_AHA152X -DAUTOCONF`
22			`GDTH = #-DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS`
23
24			`.SUFFIXES:`
25			`.SUFFIXES: .c .o .h .a`
26
27			`ifeq (${CFLAGS},)`
28			`CFLAGS = -D__KERNEL__=1 \`
29			`-DMODULE -Wall -Wstrict-prototypes -I. -I../../include \`
30			`-O2 -fomit-frame-pointer -m486`
31
32			`include ../../.config`
33
34			`TOPDIR = ../..`
35
36			`endif`
37
38			`ifeq ($(CONFIG_SCSI),y)`
39			`L_OBJS += hosts.o scsi.o scsi_ioctl.o constants.o scsicam.o`
40			`ifeq ($(CONFIG_PROC_FS),y)`
41			`L_OBJS += scsi_proc.o`
42			`endif`
43			`LX_OBJS += scsi_syms.o`
44			`else`
45			`ifeq ($(CONFIG_SCSI),m)`
46			`MX_OBJS += scsi_syms.o`
47			`M_OBJS += scsi_mod.o`
48			`endif`
49			`endif`
50
51			`ifeq ($(CONFIG_CHR_DEV_ST),y)`
52			`L_OBJS += st.o`
53			`else`
54			`ifeq ($(CONFIG_CHR_DEV_ST),m)`
55			`M_OBJS += st.o`
56			`endif`
57			`endif`
58
59			`ifeq ($(CONFIG_BLK_DEV_SD),y)`
60			`L_OBJS += sd.o sd_ioctl.o`
61			`else`
62			`ifeq ($(CONFIG_BLK_DEV_SD),m)`
63			`M_OBJS += sd_mod.o`
64			`endif`
65			`endif`
66
67			`ifeq ($(CONFIG_BLK_DEV_SR),y)`
68			`L_OBJS += sr.o sr_ioctl.o`
69			`else`
70			`ifeq ($(CONFIG_BLK_DEV_SR),m)`
71			`M_OBJS += sr_mod.o`
72			`endif`
73			`endif`
74
75			`ifeq ($(CONFIG_CHR_DEV_SG),y)`
76			`L_OBJS += sg.o`
77			`else`
78			`ifeq ($(CONFIG_CHR_DEV_SG),m)`
79			`M_OBJS += sg.o`
80			`endif`
81			`endif`
82
83			`ifeq ($(CONFIG_SCSI_ADVANSYS),y)`
84			`L_OBJS += advansys.o`
85			`else`
86			`ifeq ($(CONFIG_SCSI_ADVANSYS),m)`
87			`M_OBJS += advansys.o`
88			`endif`
89			`endif`
90
91			`ifeq ($(CONFIG_A3000_SCSI),y)`
92			`L_OBJS += a3000.o wd33c93.o`
93			`else`
94			`ifeq ($(CONFIG_A3000_SCSI),m)`
95			`M_OBJS += a3000.o wd33c93.o`
96			`endif`
97			`endif`
98
99			`ifeq ($(CONFIG_A2091_SCSI),y)`
100			`L_OBJS += a2091.o wd33c93.o`
101			`else`
102			`ifeq ($(CONFIG_A2091_SCSI),m)`
103			`M_OBJS += a2091.o wd33c93.o`
104			`endif`
105			`endif`
106
107			`ifeq ($(CONFIG_GVP11_SCSI),y)`
108			`L_OBJS += gvp11.o wd33c93.o`
109			`else`
110			`ifeq ($(CONFIG_GVP11_SCSI),m)`
111			`M_OBJS += gvp11.o wd33c93.o`
112			`endif`
113			`endif`
114
115			`ifeq ($(CONFIG_ATARI_SCSI),y)`
116			`L_OBJS += atari_scsi.o`
117			`else`
118			`ifeq ($(CONFIG_ATARI_SCSI),m)`
119			`M_OBJS += atari_scsi.o`
120			`endif`
121			`endif`
122
123			`ifeq ($(CONFIG_SCSI_PPA),y)`
124			`L_OBJS += ppa.o`
125			`else`
126			`ifeq ($(CONFIG_SCSI_PPA),m)`
127			`M_OBJS += ppa.o`
128			`endif`
129			`endif`
130
131			`ifeq ($(CONFIG_SCSI_QLOGIC_FAS),y)`
132			`L_OBJS += qlogicfas.o`
133			`else`
134			`ifeq ($(CONFIG_SCSI_QLOGIC_FAS),m)`
135			`M_OBJS += qlogicfas.o`
136			`endif`
137			`endif`
138
139
140			`ifeq ($(CONFIG_SCSI_QLOGIC_ISP),y)`
141			`L_OBJS += qlogicisp.o`
142			`else`
143			`ifeq ($(CONFIG_SCSI_QLOGIC_ISP),m)`
144			`M_OBJS += qlogicisp.o`
145			`endif`
146			`endif`
147
148			`ifeq ($(CONFIG_SCSI_ACARD),y)`
149			`L_OBJS += atp870u.o`
150			`else`
151			`ifeq ($(CONFIG_SCSI_ACARD),m)`
152			`M_OBJS += atp870u.o`
153			`endif`
154			`endif`
155
156
157			`ifeq ($(CONFIG_SCSI_INITIO),y)`
158			`L_OBJS += initio.o`
159			`else`
160			`ifeq ($(CONFIG_SCSI_INITIO),m)`
161			`M_OBJS += initio.o`
162			`endif`
163			`endif`
164
165
166			`ifeq ($(CONFIG_SCSI_AHA152X),y)`
167			`L_OBJS += aha152x.o`
168			`else`
169			`ifeq ($(CONFIG_SCSI_AHA152X),m)`
170			`M_OBJS += aha152x.o`
171			`endif`
172			`endif`
173
174			`ifeq ($(CONFIG_SCSI_AHA1542),y)`
175			`L_OBJS += aha1542.o`
176			`else`
177			`ifeq ($(CONFIG_SCSI_AHA1542),m)`
178			`M_OBJS += aha1542.o`
179			`endif`
180			`endif`
181
182			`ifeq ($(CONFIG_SCSI_AHA1740),y)`
183			`L_OBJS += aha1740.o`
184			`else`
185			`ifeq ($(CONFIG_SCSI_AHA1740),m)`
186			`M_OBJS += aha1740.o`
187			`endif`
188			`endif`
189
190			`ifeq ($(CONFIG_SCSI_AIC7XXX),y)`
191			`L_OBJS += aic7xxx.o`
192			`else`
193			`ifeq ($(CONFIG_SCSI_AIC7XXX),m)`
194			`M_OBJS += aic7xxx.o`
195			`endif`
196			`endif`
197
198			`ifeq ($(CONFIG_SCSI_DC390T),y)`
199			`L_OBJS += tmscsim.o`
200			`else`
201			`ifeq ($(CONFIG_SCSI_DC390T),m)`
202			`M_OBJS += tmscsim.o`
203			`endif`
204			`endif`
205
206			`ifeq ($(CONFIG_SCSI_AM53C974),y)`
207			`L_OBJS += AM53C974.o`
208			`else`
209			`ifeq ($(CONFIG_SCSI_AM53C974),m)`
210			`M_OBJS += AM53C974.o`
211			`endif`
212			`endif`
213
214			`ifeq ($(CONFIG_SCSI_BUSLOGIC),y)`
215			`L_OBJS += BusLogic.o`
216			`else`
217			`ifeq ($(CONFIG_SCSI_BUSLOGIC),m)`
218			`M_OBJS += BusLogic.o`
219			`endif`
220			`endif`
221
222			`ifeq ($(CONFIG_SCSI_EATA_DMA),y)`
223			`L_OBJS += eata_dma.o`
224			`else`
225			`ifeq ($(CONFIG_SCSI_EATA_DMA),m)`
226			`M_OBJS += eata_dma.o`
227			`endif`
228			`endif`
229
230			`ifeq ($(CONFIG_SCSI_EATA_PIO),y)`
231			`L_OBJS += eata_pio.o`
232			`else`
233			`ifeq ($(CONFIG_SCSI_EATA_PIO),m)`
234			`M_OBJS += eata_pio.o`
235			`endif`
236			`endif`
237
238			`ifeq ($(CONFIG_SCSI_U14_34F),y)`
239			`L_OBJS += u14-34f.o`
240			`else`
241			`ifeq ($(CONFIG_SCSI_U14_34F),m)`
242			`M_OBJS += u14-34f.o`
243			`endif`
244			`endif`
245
246			`ifeq ($(CONFIG_SCSI_SUNESP),y)`
247			`L_OBJS += esp.o`
248			`else`
249			`ifeq ($(CONFIG_SCSI_SUNESP),m)`
250			`M_OBJS += esp.o`
251			`endif`
252			`endif`
253
254			`ifeq ($(CONFIG_SCSI_GDTH),y)`
255			`L_OBJS += gdth.o`
256			`else`
257			`ifeq ($(CONFIG_SCSI_GDTH),m)`
258			`M_OBJS += gdth.o`
259			`endif`
260			`endif`
261
262			`ifeq ($(CONFIG_SCSI_DEBUG),y)`
263			`L_OBJS += scsi_debug.o`
264			`else`
265			`ifeq ($(CONFIG_SCSI_DEBUG),m)`
266			`M_OBJS += scsi_debug.o`
267			`endif`
268			`endif`
269
270			`ifeq ($(CONFIG_SCSI_FUTURE_DOMAIN),y)`
271			`L_OBJS += fdomain.o`
272			`else`
273			`ifeq ($(CONFIG_SCSI_FUTURE_DOMAIN),m)`
274			`M_OBJS += fdomain.o`
275			`endif`
276			`endif`
277
278			`ifeq ($(CONFIG_SCSI_IN2000),y)`
279			`L_OBJS += in2000.o`
280			`else`
281			`ifeq ($(CONFIG_SCSI_IN2000),m)`
282			`M_OBJS += in2000.o`
283			`endif`
284			`endif`
285
286			`ifeq ($(CONFIG_SCSI_GENERIC_NCR5380),y)`
287			`L_OBJS += g_NCR5380.o`
288			`else`
289			`ifeq ($(CONFIG_SCSI_GENERIC_NCR5380),m)`
290			`M_OBJS += g_NCR5380.o`
291			`endif`
292			`endif`
293
294			`ifeq ($(CONFIG_SCSI_NCR53C7xx),y)`
295			`L_OBJS += 53c7,8xx.o`
296			`else`
297			`ifeq ($(CONFIG_SCSI_NCR53C7xx),m)`
298			`M_OBJS += 53c7,8xx.o`
299			`endif`
300			`endif`
301
302			`ifeq ($(CONFIG_SCSI_NCR53C8XX),y)`
303			`L_OBJS += ncr53c8xx.o`
304			`else`
305			`ifeq ($(CONFIG_SCSI_NCR53C8XX),m)`
306			`M_OBJS += ncr53c8xx.o`
307			`endif`
308			`endif`
309
310			`ifeq ($(CONFIG_SCSI_PAS16),y)`
311			`L_OBJS += pas16.o`
312			`else`
313			`ifeq ($(CONFIG_SCSI_PAS16),m)`
314			`M_OBJS += pas16.o`
315			`endif`
316			`endif`
317
318			`ifeq ($(CONFIG_SCSI_SEAGATE),y)`
319			`L_OBJS += seagate.o`
320			`else`
321			`ifeq ($(CONFIG_SCSI_SEAGATE),m)`
322			`M_OBJS += seagate.o`
323			`endif`
324			`endif`
325			`ifndef CONFIG_SCSI_SEAGATE`
326			`ifeq ($(CONFIG_SCSI_FD_8xx),y)`
327			`L_OBJS += seagate.o`
328			`else`
329			`ifeq ($(CONFIG_SCSI_FD_8xx),m)`
330			`M_OBJS += seagate.o`
331			`endif`
332			`endif`
333			`endif`
334
335			`ifeq ($(CONFIG_SCSI_7000FASST),y)`
336			`L_OBJS += wd7000.o`
337			`else`
338			`ifeq ($(CONFIG_SCSI_7000FASST),m)`
339			`M_OBJS += wd7000.o`
340			`endif`
341			`endif`
342
343			`ifeq ($(CONFIG_SCSI_T128),y)`
344			`L_OBJS += t128.o`
345			`else`
346			`ifeq ($(CONFIG_SCSI_T128),m)`
347			`M_OBJS += t128.o`
348			`endif`
349			`endif`
350
351			`ifeq ($(CONFIG_SCSI_DTC3280),y)`
352			`L_OBJS += dtc.o`
353			`else`
354			`ifeq ($(CONFIG_SCSI_DTC3280),m)`
355			`M_OBJS += dtc.o`
356			`endif`
357			`endif`
358
359			`ifeq ($(CONFIG_SCSI_ULTRASTOR),y)`
360			`L_OBJS += ultrastor.o`
361			`else`
362			`ifeq ($(CONFIG_SCSI_ULTRASTOR),m)`
363			`M_OBJS += ultrastor.o`
364			`endif`
365			`endif`
366
367			`ifeq ($(CONFIG_SCSI_EATA),y)`
368			`L_OBJS += eata.o`
369			`else`
370			`ifeq ($(CONFIG_SCSI_EATA),m)`
371			`M_OBJS += eata.o`
372			`endif`
373			`endif`
374
375			`ifeq ($(CONFIG_SCSI_NCR53C406A),y)`
376			`L_OBJS += NCR53c406a.o`
377			`else`
378			`ifeq ($(CONFIG_SCSI_NCR53C406A),m)`
379			`M_OBJS += NCR53c406a.o`
380			`endif`
381			`endif`
382
383			`ifeq ($(CONFIG_SCSI_SYM53C416),y)`
384			`L_OBJS += sym53c416.o`
385			`else`
386			`ifeq ($(CONFIG_SCSI_SYM53C416),m)`
387			`M_OBJS += sym53c416.o`
388			`endif`
389			`endif`
390
391			`ifeq ($(CONFIG_SCSI_TC2550),y)`
392			`L_OBJS += tripace.o`
393			`else`
394			`ifeq ($(CONFIG_SCSI_TC2550),m)`
395			`M_OBJS += tripace.o`
396			`endif`
397			`endif`
398
399			`ifeq ($(CONFIG_SCSI_MEGARAID),y)`
400			`L_OBJS += megaraid.o`
401			`else`
402			`ifeq ($(CONFIG_SCSI_MEGARAID),m)`
403			`M_OBJS += megaraid.o`
404			`endif`
405			`endif`
406
407			`ifeq ($(CONFIG_SCSI_INIA100),y)`
408			`L_OBJS += a100u2w.o`
409			`else`
410			`ifeq ($(CONFIG_SCSI_INIA100),m)`
411			`M_OBJS += a100u2w.o`
412			`endif`
413			`endif`
414
415			`ifeq ($(CONFIG_SCSI_PCI2000),y)`
416			`L_OBJS += pci2000.o`
417			`else`
418			`ifeq ($(CONFIG_SCSI_PCI2000),m)`
419			`M_OBJS += pci2000.o`
420			`endif`
421			`endif`
422
423			`ifeq ($(CONFIG_SCSI_PCI2220I),y)`
424			`L_OBJS += pci2220i.o`
425			`else`
426			`ifeq ($(CONFIG_SCSI_PCI2220I),m)`
427			`M_OBJS += pci2220i.o`
428			`endif`
429			`endif`
430
431			`ifeq ($(CONFIG_SCSI_PSI240I),y)`
432			`L_OBJS += psi240i.o`
433			`else`
434			`ifeq ($(CONFIG_SCSI_PSI240I),m)`
435			`M_OBJS += psi240i.o`
436			`endif`
437			`endif`
438
439			`ifeq ($(CONFIG_BLK_DEV_IDESCSI),y)`
440			`L_OBJS += ide-scsi.o`
441			`endif`
442
443			`include $(TOPDIR)/Rules.make`
444
445			`aha152x.o: aha152x.c`
446			`$(CC) $(CFLAGS) $(AHA152X) -c aha152x.c`
447
448			`gdth.o: gdth.c gdth.h gdth_proc.c gdth_proc.h`
449			`$(CC) $(CFLAGS) $(GDTH) -c gdth.c`
450
451			`aic7xxx.o: aic7xxx.c aic7xxx_seq.c aic7xxx_reg.h`
452			`$(CC) $(CFLAGS) -c -o $@ aic7xxx.c`
453
454			`seagate.o: seagate.c`
455			`$(CC) $(CFLAGS) -DARBITRATE -DSLOW_HANDSHAKE -DFAST32 -c seagate.c`
456
457			`tmscsim.o : tmscsim.c`
458			`$(CC) $(CFLAGS) -c tmscsim.c`
459
460			`53c8xx_d.h 53c8xx_u.h : 53c7,8xx.scr script_asm.pl`
461			`ln -sf 53c7,8xx.scr fake.c`
462			`$(CPP) -traditional -DCHIP=810 fake.c \| grep -v '^#' \| perl script_asm.pl`
463			`mv script.h 53c8xx_d.h`
464			`mv scriptu.h 53c8xx_u.h`
465			`rm fake.c`
466
467			`g_NCR5380.o: g_NCR5380.c`
468			`$(CC) $(CFLAGS) -DGENERIC_NCR5380_OVERRIDE="{{(NCR5380_map_type)0x350,5,0, BOARD_NCR53C400}};" -c g_NCR5380.c`
469
470			`initio.o: ini9100u.o i91uscsi.o`
471			`$(LD) -r -o initio.o ini9100u.o i91uscsi.o`
472
473			`megaraid.o: megaraid.c`
474			`$(CC) $(CFLAGS) -c megaraid.c`
475
476			`a100u2w.o: inia100.o i60uscsi.o`
477			`$(LD) -r -o a100u2w.o inia100.o i60uscsi.o`
478
479			`scsi_mod.o: $(MX_OBJS) hosts.o scsi.o scsi_ioctl.o constants.o \`
480			`scsicam.o scsi_proc.o`
481			`$(LD) $(LD_RFLAG) -r -o $@ $(MX_OBJS) hosts.o scsi.o scsi_ioctl.o constants.o scsicam.o scsi_proc.o`
482
483			`sr_mod.o: sr.o sr_ioctl.o`
484			`$(LD) $(LD_RFLAG) -r -o $@ sr.o sr_ioctl.o`
485
486			`sd_mod.o: sd.o sd_ioctl.o`
487			`$(LD) $(LD_RFLAG) -r -o $@ sd.o sd_ioctl.o`