Subversion Repositories or1k

/*

 * ASCII values for a number of symbolic constants, printing functions,

 * etc.

 */

/*

 * Don't import our own symbols, as this would severely mess up our

 * symbol tables.

 */

#define _SCSI_SYMS_VER_

#define __NO_VERSION__

#include <linux/module.h>

#include <linux/config.h>

#include <linux/blk.h>

#include <linux/kernel.h>

#include "scsi.h"

#include "hosts.h"

#define CONST_COMMAND   0x01

#define CONST_STATUS    0x02

#define CONST_SENSE     0x04

#define CONST_XSENSE    0x08

#define CONST_CMND      0x10

#define CONST_MSG       0x20

#define CONST_HOST      0x40

#define CONST_DRIVER    0x80

static const char unknown[] = "UNKNOWN";

#ifdef CONFIG_SCSI_CONSTANTS

#ifdef CONSTANTS

#undef CONSTANTS

#endif

#define CONSTANTS (CONST_COMMAND | CONST_STATUS | CONST_SENSE | CONST_XSENSE \

                   | CONST_CMND | CONST_MSG | CONST_HOST | CONST_DRIVER)

#endif

#if (CONSTANTS & CONST_COMMAND)

static const char * group_0_commands[] = {

/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",

/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",

/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,

/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",

/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",

/* 17-1b */ "Release", "Copy", "Erase", "Mode Sense", "Start/Stop Unit",

/* 1c-1d */ "Receive Diagnostic", "Send Diagnostic",

/* 1e-1f */ "Prevent/Allow Medium Removal", unknown,

};

static const char *group_1_commands[] = {

/* 20-22 */  unknown, unknown, unknown,

/* 23-28 */ unknown, unknown, "Read Capacity", unknown, unknown, "Read (10)",

/* 29-2d */ unknown, "Write (10)", "Seek (10)", unknown, unknown,

/* 2e-31 */ "Write Verify","Verify", "Search High", "Search Equal",

/* 32-34 */ "Search Low", "Set Limits", "Prefetch or Read Position",

/* 35-37 */ "Synchronize Cache","Lock/Unlock Cache", "Read Defect Data",

/* 38-3c */ "Medium Scan", "Compare","Copy Verify", "Write Buffer", "Read Buffer",

/* 3d-3f */ "Update Block", "Read Long",  "Write Long",

};

static const char *group_2_commands[] = {

/* 40-41 */ "Change Definition", "Write Same",

/* 42-48 */ unknown, "Read TOC", unknown, unknown, unknown, unknown, unknown,

/* 49-4f */ unknown, unknown, unknown, "Log Select", "Log Sense", unknown, unknown,

/* 50-55 */ unknown, unknown, unknown, unknown, unknown, "Mode Select (10)",

/* 56-5b */ unknown, unknown, unknown, unknown, "Mode Sense (10)", unknown,

/* 5c-5f */ unknown, unknown, unknown,

};

#define group(opcode) (((opcode) >> 5) & 7)

#define RESERVED_GROUP  0

#define VENDOR_GROUP    1

#define NOTEXT_GROUP    2

static const char **commands[] = {

    group_0_commands, group_1_commands, group_2_commands,

    (const char **) RESERVED_GROUP, (const char **) RESERVED_GROUP,

    (const char **) NOTEXT_GROUP, (const char **) VENDOR_GROUP,

    (const char **) VENDOR_GROUP

};

static const char reserved[] = "RESERVED";

static const char vendor[] = "VENDOR SPECIFIC";

static void print_opcode(int opcode) {

    const char **table = commands[ group(opcode) ];

    switch ((unsigned long) table) {

    case RESERVED_GROUP:

        printk("%s(0x%02x) ", reserved, opcode);

        break;

    case NOTEXT_GROUP:

        printk("%s(0x%02x) ", unknown, opcode);

        break;

    case VENDOR_GROUP:

        printk("%s(0x%02x) ", vendor, opcode);

        break;

    default:

        if (table[opcode & 0x1f] != unknown)

            printk("%s ",table[opcode & 0x1f]);

        else

            printk("%s(0x%02x) ", unknown, opcode);

        break;

    }

}

#else /* CONST & CONST_COMMAND */

static void print_opcode(int opcode) {

    printk("0x%02x ", opcode);

}

#endif  

void print_command (unsigned char *command) {

    int i,s;

    print_opcode(command[0]);

    for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)

        printk("%02x ", command[i]);

    printk("\n");

}

#if (CONSTANTS & CONST_STATUS)

static const char * statuses[] = {

/* 0-4 */ "Good", "Check Condition", "Condition Good", unknown, "Busy",

/* 5-9 */ unknown, unknown, unknown, "Intermediate Good", unknown,

/* a-d */ "Intermediate Good", unknown, "Reservation Conflict", unknown,

/* e-f */ unknown, unknown,

};

#endif

void print_status (int status) {

    status = (status >> 1) & 0xf;

#if (CONSTANTS & CONST_STATUS)

    printk("%s ",statuses[status]);

#else

    printk("0x%0x ", status);

#endif 

}

#if (CONSTANTS & CONST_XSENSE)

#define D 0x001  /* DIRECT ACCESS DEVICE (disk) */

#define T 0x002  /* SEQUENTIAL ACCESS DEVICE (tape) */

#define L 0x004  /* PRINTER DEVICE */

#define P 0x008  /* PROCESSOR DEVICE */

#define W 0x010  /* WRITE ONCE READ MULTIPLE DEVICE */

#define R 0x020  /* READ ONLY (CD-ROM) DEVICE */

#define S 0x040  /* SCANNER DEVICE */

#define O 0x080  /* OPTICAL MEMORY DEVICE */

#define M 0x100  /* MEDIA CHANGER DEVICE */

#define C 0x200  /* COMMUNICATION DEVICE */

struct error_info{

    unsigned char code1, code2;

    unsigned short int devices;

    const char * text;

};

struct error_info2{

    unsigned char code1, code2_min, code2_max;

    unsigned short int devices;

    const char * text;

};

static struct error_info2 additional2[] =

{

  {0x40,0x00,0x7f,D,"Ram failure (%x)"},

  {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"},

  {0x41,0x00,0xff,D,"Data path failure (%x)"},

  {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"},

  {0, 0, 0, 0, NULL}

};

static struct error_info additional[] =

{

  {0x00,0x01,T,"Filemark detected"},

  {0x00,0x02,T|S,"End-of-partition/medium detected"},

  {0x00,0x03,T,"Setmark detected"},

  {0x00,0x04,T|S,"Beginning-of-partition/medium detected"},

  {0x00,0x05,T|S,"End-of-data detected"},

  {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"},

  {0x00,0x11,R,"Audio play operation in progress"},

  {0x00,0x12,R,"Audio play operation paused"},

  {0x00,0x13,R,"Audio play operation successfully completed"},

  {0x00,0x14,R,"Audio play operation stopped due to error"},

  {0x00,0x15,R,"No current audio status to return"},

  {0x01,0x00,D|W|O,"No index/sector signal"},

  {0x02,0x00,D|W|R|O|M,"No seek complete"},

  {0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"},

  {0x03,0x01,T,"No write current"},

  {0x03,0x02,T,"Excessive write errors"},

  {0x04,0x00,D|T|L|P|W|R|S|O|M|C,

     "Logical unit not ready, cause not reportable"},

  {0x04,0x01,D|T|L|P|W|R|S|O|M|C,

     "Logical unit is in process of becoming ready"},

  {0x04,0x02,D|T|L|P|W|R|S|O|M|C,

     "Logical unit not ready, initializing command required"},

  {0x04,0x03,D|T|L|P|W|R|S|O|M|C,

     "Logical unit not ready, manual intervention required"},

  {0x04,0x04,D|T|L|O,"Logical unit not ready, format in progress"},

  {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"},

  {0x06,0x00,D|W|R|O|M,"No reference position found"},

  {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"},

  {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"},

  {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"},

  {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"},

  {0x09,0x00,D|T|W|R|O,"Track following error"},

  {0x09,0x01,W|R|O,"Tracking servo failure"},

  {0x09,0x02,W|R|O,"Focus servo failure"},

  {0x09,0x03,W|R|O,"Spindle servo failure"},

  {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"},

  {0x0C,0x00,T|S,"Write error"},

  {0x0C,0x01,D|W|O,"Write error recovered with auto reallocation"},

  {0x0C,0x02,D|W|O,"Write error - auto reallocation failed"},

  {0x10,0x00,D|W|O,"Id crc or ecc error"},

  {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"},

  {0x11,0x01,D|T|W|S|O,"Read retries exhausted"},

  {0x11,0x02,D|T|W|S|O,"Error too long to correct"},

  {0x11,0x03,D|T|W|S|O,"Multiple read errors"},

  {0x11,0x04,D|W|O,"Unrecovered read error - auto reallocate failed"},

  {0x11,0x05,W|R|O,"L-ec uncorrectable error"},

  {0x11,0x06,W|R|O,"Circ unrecovered error"},

  {0x11,0x07,W|O,"Data resynchronization error"},

  {0x11,0x08,T,"Incomplete block read"},

  {0x11,0x09,T,"No gap found"},

  {0x11,0x0A,D|T|O,"Miscorrected error"},

  {0x11,0x0B,D|W|O,"Unrecovered read error - recommend reassignment"},

  {0x11,0x0C,D|W|O,"Unrecovered read error - recommend rewrite the data"},

  {0x12,0x00,D|W|O,"Address mark not found for id field"},

  {0x13,0x00,D|W|O,"Address mark not found for data field"},

  {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"},

  {0x14,0x01,D|T|W|R|O,"Record not found"},

  {0x14,0x02,T,"Filemark or setmark not found"},

  {0x14,0x03,T,"End-of-data not found"},

  {0x14,0x04,T,"Block sequence error"},

  {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"},

  {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"},

  {0x15,0x02,D|T|W|R|O,"Positioning error detected by read of medium"},

  {0x16,0x00,D|W|O,"Data synchronization mark error"},

  {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"},

  {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"},

  {0x17,0x02,D|T|W|R|O,"Recovered data with positive head offset"},

  {0x17,0x03,D|T|W|R|O,"Recovered data with negative head offset"},

  {0x17,0x04,W|R|O,"Recovered data with retries and/or circ applied"},

  {0x17,0x05,D|W|R|O,"Recovered data using previous sector id"},

  {0x17,0x06,D|W|O,"Recovered data without ecc - data auto-reallocated"},

  {0x17,0x07,D|W|O,"Recovered data without ecc - recommend reassignment"},

  {0x18,0x00,D|T|W|R|O,"Recovered data with error correction applied"},

  {0x18,0x01,D|W|R|O,"Recovered data with error correction and retries applied"},

  {0x18,0x02,D|W|R|O,"Recovered data - data auto-reallocated"},

  {0x18,0x03,R,"Recovered data with circ"},

  {0x18,0x04,R,"Recovered data with lec"},

  {0x18,0x05,D|W|R|O,"Recovered data - recommend reassignment"},

  {0x19,0x00,D|O,"Defect list error"},

  {0x19,0x01,D|O,"Defect list not available"},

  {0x19,0x02,D|O,"Defect list error in primary list"},

  {0x19,0x03,D|O,"Defect list error in grown list"},

  {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"},

  {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"},

  {0x1C,0x00,D|O,"Defect list not found"},

  {0x1C,0x01,D|O,"Primary defect list not found"},

  {0x1C,0x02,D|O,"Grown defect list not found"},

  {0x1D,0x00,D|W|O,"Miscompare during verify operation"},

  {0x1E,0x00,D|W|O,"Recovered id with ecc correction"},

  {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"},

  {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"},

  {0x21,0x01,M,"Invalid element address"},

  {0x22,0x00,D,"Illegal function (should use 20 00, 24 00, or 26 00)"},

  {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"},

  {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"},

  {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"},

  {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"},

  {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"},

  {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"},

  {0x27,0x00,D|T|W|O,"Write protected"},

  {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"},

  {0x28,0x01,M,"Import or export element accessed"},

  {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"},

  {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"},

  {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"},

  {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"},

  {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"},

  {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"},

  {0x2C,0x01,S,"Too many windows specified"},

  {0x2C,0x02,S,"Invalid combination of windows specified"},

  {0x2D,0x00,T,"Overwrite error on update in place"},

  {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"},

  {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"},

  {0x30,0x01,D|T|W|R|O,"Cannot read medium - unknown format"},

  {0x30,0x02,D|T|W|R|O,"Cannot read medium - incompatible format"},

  {0x30,0x03,D|T,"Cleaning cartridge installed"},

  {0x31,0x00,D|T|W|O,"Medium format corrupted"},

  {0x31,0x01,D|L|O,"Format command failed"},

  {0x32,0x00,D|W|O,"No defect spare location available"},

  {0x32,0x01,D|W|O,"Defect list update failure"},

  {0x33,0x00,T,"Tape length error"},

  {0x36,0x00,L,"Ribbon, ink, or toner failure"},

  {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"},

  {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"},

  {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"},

  {0x3B,0x00,T|L,"Sequential positioning error"},

  {0x3B,0x01,T,"Tape position error at beginning-of-medium"},

  {0x3B,0x02,T,"Tape position error at end-of-medium"},

  {0x3B,0x03,L,"Tape or electronic vertical forms unit not ready"},

  {0x3B,0x04,L,"Slew failure"},

  {0x3B,0x05,L,"Paper jam"},

  {0x3B,0x06,L,"Failed to sense top-of-form"},

  {0x3B,0x07,L,"Failed to sense bottom-of-form"},

  {0x3B,0x08,T,"Reposition error"},

  {0x3B,0x09,S,"Read past end of medium"},

  {0x3B,0x0A,S,"Read past beginning of medium"},

  {0x3B,0x0B,S,"Position past end of medium"},

  {0x3B,0x0C,S,"Position past beginning of medium"},

  {0x3B,0x0D,M,"Medium destination element full"},

  {0x3B,0x0E,M,"Medium source element empty"},

  {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"},

  {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"},

  {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"},

  {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"},

  {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"},

  {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"},

  {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"},

  {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"},

  {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"},

  {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"},

  {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"},

  {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"},

  {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"},

  {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"},

  {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"},

  {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"},

  {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"},

  {0x50,0x00,T,"Write append error"},

  {0x50,0x01,T,"Write append position error"},

  {0x50,0x02,T,"Position error related to timing"},

  {0x51,0x00,T|O,"Erase failure"},

  {0x52,0x00,T,"Cartridge fault"},

  {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"},

  {0x53,0x01,T,"Unload tape failure"},

  {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"},

  {0x54,0x00,P,"Scsi to host system interface failure"},

  {0x55,0x00,P,"System resource failure"},

  {0x57,0x00,R,"Unable to recover table-of-contents"},

  {0x58,0x00,O,"Generation does not exist"},

  {0x59,0x00,O,"Updated block read"},

  {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"},

  {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"},

  {0x5A,0x02,D|T|W|O,"Operator selected write protect"},

  {0x5A,0x03,D|T|W|O,"Operator selected write permit"},

  {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"},

  {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"},

  {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"},

  {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"},

  {0x5C,0x00,D|O,"Rpl status change"},

  {0x5C,0x01,D|O,"Spindles synchronized"},

  {0x5C,0x02,D|O,"Spindles not synchronized"},

  {0x60,0x00,S,"Lamp failure"},

  {0x61,0x00,S,"Video acquisition error"},

  {0x61,0x01,S,"Unable to acquire video"},

  {0x61,0x02,S,"Out of focus"},

  {0x62,0x00,S,"Scan head positioning error"},

  {0x63,0x00,R,"End of user area encountered on this track"},

  {0x64,0x00,R,"Illegal mode for this track"},

  {0, 0, 0, NULL}

};

#endif

#if (CONSTANTS & CONST_SENSE)

static const char *snstext[] = {

    "None",                     /* There is no sense information */

    "Recovered Error",          /* The last command completed successfully

                                   but used error correction */

    "Not Ready",                /* The addressed target is not ready */

    "Medium Error",             /* Data error detected on the medium */

    "Hardware Error",           /* Controller or device failure */

    "Illegal Request",

    "Unit Attention",           /* Removable medium was changed, or

                                   the target has been reset */

    "Data Protect",             /* Access to the data is blocked */

    "Blank Check",              /* Reached unexpected written or unwritten

                                   region of the medium */

    "Key=9",                    /* Vendor specific */

    "Copy Aborted",             /* COPY or COMPARE was aborted */

    "Aborted Command",          /* The target aborted the command */

    "Equal",                    /* A SEARCH DATA command found data equal */

    "Volume Overflow",          /* Medium full with still data to be written */

    "Miscompare",               /* Source data and data on the medium

                                   do not agree */

    "Key=15"                    /* Reserved */

};

#endif

/* Print sense information */

void print_sense(const char * devclass, Scsi_Cmnd * SCpnt)

{

    int i, s;

    int sense_class, valid, code;

    unsigned char * sense_buffer = SCpnt->sense_buffer;

    const char * error = NULL;

    sense_class = (sense_buffer[0] >> 4) & 0x07;

    code = sense_buffer[0] & 0xf;

    valid = sense_buffer[0] & 0x80;

    if (sense_class == 7) {     /* extended sense data */

        s = sense_buffer[7] + 8;

        if(s > sizeof(SCpnt->sense_buffer))

           s = sizeof(SCpnt->sense_buffer);

        if (!valid)

            printk("extra data not valid ");

        if (sense_buffer[2] & 0x80)

           printk( "FMK ");     /* current command has read a filemark */

        if (sense_buffer[2] & 0x40)

           printk( "EOM ");     /* end-of-medium condition exists */

        if (sense_buffer[2] & 0x20)

           printk( "ILI ");     /* incorrect block length requested */

        switch (code) {

        case 0x0:

            error = "Current";  /* error concerns current command */

            break;

        case 0x1:

            error = "Deferred"; /* error concerns some earlier command */

                /* e.g., an earlier write to disk cache succeeded, but

                   now the disk discovers that it cannot write the data */

            break;

        default:

            error = "Invalid";

        }

        printk("%s error ", error);

#if (CONSTANTS & CONST_SENSE)

        printk( "%s%s: sense key %s\n", devclass,

               kdevname(SCpnt->request.rq_dev), snstext[sense_buffer[2] & 0x0f]);

#else

        printk("%s%s: sns = %2x %2x\n", devclass,

               kdevname(SCpnt->request.rq_dev), sense_buffer[0], sense_buffer[2]);

#endif

        /* Check to see if additional sense information is available */

        if(sense_buffer[7] + 7 < 13 ||

           (sense_buffer[12] == 0  && sense_buffer[13] ==  0)) goto done;

#if (CONSTANTS & CONST_XSENSE)

        for(i=0; additional[i].text; i++)

            if(additional[i].code1 == sense_buffer[12] &&

               additional[i].code2 == sense_buffer[13])

                printk("Additional sense indicates %s\n", additional[i].text);

        for(i=0; additional2[i].text; i++)

            if(additional2[i].code1 == sense_buffer[12] &&

               additional2[i].code2_min >= sense_buffer[13]  &&

               additional2[i].code2_max <= sense_buffer[13]) {

                printk("Additional sense indicates ");

                printk(additional2[i].text, sense_buffer[13]);