| 1 |
1626 |
jcastillo |
/********************************************************
|
| 2 |
|
|
* Header file for eata_dma.c and eata_pio.c *
|
| 3 |
|
|
* Linux EATA SCSI drivers *
|
| 4 |
|
|
* (c) 1993-96 Michael Neuffer *
|
| 5 |
|
|
* mike@i-Connect.Net *
|
| 6 |
|
|
* neuffer@mail.uni-mainz.de *
|
| 7 |
|
|
*********************************************************
|
| 8 |
|
|
* last change: 96/08/14 *
|
| 9 |
|
|
********************************************************/
|
| 10 |
|
|
|
| 11 |
|
|
|
| 12 |
|
|
#ifndef _EATA_GENERIC_H
|
| 13 |
|
|
#define _EATA_GENERIC_H
|
| 14 |
|
|
|
| 15 |
|
|
|
| 16 |
|
|
|
| 17 |
|
|
/*********************************************
|
| 18 |
|
|
* Misc. definitions *
|
| 19 |
|
|
*********************************************/
|
| 20 |
|
|
|
| 21 |
|
|
#ifndef TRUE
|
| 22 |
|
|
#define TRUE 1
|
| 23 |
|
|
#endif
|
| 24 |
|
|
#ifndef FALSE
|
| 25 |
|
|
#define FALSE 0
|
| 26 |
|
|
#endif
|
| 27 |
|
|
|
| 28 |
|
|
#define min(a,b) ((a<b)?(a):(b))
|
| 29 |
|
|
|
| 30 |
|
|
#define R_LIMIT 0x20000
|
| 31 |
|
|
|
| 32 |
|
|
#define MAXISA 4
|
| 33 |
|
|
#define MAXEISA 16
|
| 34 |
|
|
#define MAXPCI 16
|
| 35 |
|
|
#define MAXIRQ 16
|
| 36 |
|
|
#define MAXTARGET 16
|
| 37 |
|
|
#define MAXCHANNEL 3
|
| 38 |
|
|
|
| 39 |
|
|
#define IS_ISA 'I'
|
| 40 |
|
|
#define IS_EISA 'E'
|
| 41 |
|
|
#define IS_PCI 'P'
|
| 42 |
|
|
|
| 43 |
|
|
#define BROKEN_INQUIRY 1
|
| 44 |
|
|
|
| 45 |
|
|
#define BUSMASTER 0xff
|
| 46 |
|
|
#define PIO 0xfe
|
| 47 |
|
|
|
| 48 |
|
|
#define EATA_SIGNATURE 0x45415441 /* BIG ENDIAN coded "EATA" sig. */
|
| 49 |
|
|
|
| 50 |
|
|
#define DPT_ID1 0x12
|
| 51 |
|
|
#define DPT_ID2 0x14
|
| 52 |
|
|
|
| 53 |
|
|
#define ATT_ID1 0x06
|
| 54 |
|
|
#define ATT_ID2 0x94
|
| 55 |
|
|
#define ATT_ID3 0x0
|
| 56 |
|
|
|
| 57 |
|
|
#define NEC_ID1 0x38
|
| 58 |
|
|
#define NEC_ID2 0xa3
|
| 59 |
|
|
#define NEC_ID3 0x82
|
| 60 |
|
|
|
| 61 |
|
|
|
| 62 |
|
|
#define EATA_CP_SIZE 44
|
| 63 |
|
|
|
| 64 |
|
|
#define MAX_PCI_DEVICES 32 /* Maximum # Of Devices Per Bus */
|
| 65 |
|
|
#define MAX_METHOD_2 16 /* Max Devices For Method 2 */
|
| 66 |
|
|
#define MAX_PCI_BUS 16 /* Maximum # Of Busses Allowed */
|
| 67 |
|
|
|
| 68 |
|
|
#define SG_SIZE 64
|
| 69 |
|
|
#define SG_SIZE_BIG 252 /* max. 8096 elements, 64k */
|
| 70 |
|
|
|
| 71 |
|
|
#define UPPER_DEVICE_QUEUE_LIMIT 64 /* The limit we have to set for the
|
| 72 |
|
|
* device queue to keep the broken
|
| 73 |
|
|
* midlevel SCSI code from producing
|
| 74 |
|
|
* bogus timeouts
|
| 75 |
|
|
*/
|
| 76 |
|
|
|
| 77 |
|
|
#define TYPE_DISK_QUEUE 16
|
| 78 |
|
|
#define TYPE_TAPE_QUEUE 4
|
| 79 |
|
|
#define TYPE_ROM_QUEUE 4
|
| 80 |
|
|
#define TYPE_OTHER_QUEUE 2
|
| 81 |
|
|
|
| 82 |
|
|
#define FREE 0
|
| 83 |
|
|
#define OK 0
|
| 84 |
|
|
#define NO_TIMEOUT 0
|
| 85 |
|
|
#define USED 1
|
| 86 |
|
|
#define TIMEOUT 2
|
| 87 |
|
|
#define RESET 4
|
| 88 |
|
|
#define LOCKED 8
|
| 89 |
|
|
#define ABORTED 16
|
| 90 |
|
|
|
| 91 |
|
|
#define READ 0
|
| 92 |
|
|
#define WRITE 1
|
| 93 |
|
|
#define OTHER 2
|
| 94 |
|
|
|
| 95 |
|
|
#define HD(cmd) ((hostdata *)&(cmd->host->hostdata))
|
| 96 |
|
|
#define CD(cmd) ((struct eata_ccb *)(cmd->host_scribble))
|
| 97 |
|
|
#define SD(host) ((hostdata *)&(host->hostdata))
|
| 98 |
|
|
|
| 99 |
|
|
#define DELAY(x) { ulong flags, i; \
|
| 100 |
|
|
save_flags(flags); sti(); \
|
| 101 |
|
|
i = jiffies + (x * HZ); \
|
| 102 |
|
|
while (jiffies < i); \
|
| 103 |
|
|
restore_flags(flags); }
|
| 104 |
|
|
|
| 105 |
|
|
/***********************************************
|
| 106 |
|
|
* EATA Command & Register definitions *
|
| 107 |
|
|
***********************************************/
|
| 108 |
|
|
#define PCI_REG_DPTconfig 0x40
|
| 109 |
|
|
#define PCI_REG_PumpModeAddress 0x44
|
| 110 |
|
|
#define PCI_REG_PumpModeData 0x48
|
| 111 |
|
|
#define PCI_REG_ConfigParam1 0x50
|
| 112 |
|
|
#define PCI_REG_ConfigParam2 0x54
|
| 113 |
|
|
|
| 114 |
|
|
|
| 115 |
|
|
#define EATA_CMD_PIO_SETUPTEST 0xc6
|
| 116 |
|
|
#define EATA_CMD_PIO_READ_CONFIG 0xf0
|
| 117 |
|
|
#define EATA_CMD_PIO_SET_CONFIG 0xf1
|
| 118 |
|
|
#define EATA_CMD_PIO_SEND_CP 0xf2
|
| 119 |
|
|
#define EATA_CMD_PIO_RECEIVE_SP 0xf3
|
| 120 |
|
|
#define EATA_CMD_PIO_TRUNC 0xf4
|
| 121 |
|
|
|
| 122 |
|
|
#define EATA_CMD_RESET 0xf9
|
| 123 |
|
|
#define EATA_CMD_IMMEDIATE 0xfa
|
| 124 |
|
|
|
| 125 |
|
|
#define EATA_CMD_DMA_READ_CONFIG 0xfd
|
| 126 |
|
|
#define EATA_CMD_DMA_SET_CONFIG 0xfe
|
| 127 |
|
|
#define EATA_CMD_DMA_SEND_CP 0xff
|
| 128 |
|
|
|
| 129 |
|
|
#define ECS_EMULATE_SENSE 0xd4
|
| 130 |
|
|
|
| 131 |
|
|
#define EATA_GENERIC_ABORT 0x00
|
| 132 |
|
|
#define EATA_SPECIFIC_RESET 0x01
|
| 133 |
|
|
#define EATA_BUS_RESET 0x02
|
| 134 |
|
|
#define EATA_SPECIFIC_ABORT 0x03
|
| 135 |
|
|
#define EATA_QUIET_INTR 0x04
|
| 136 |
|
|
#define EATA_COLD_BOOT_HBA 0x06 /* Only as a last resort */
|
| 137 |
|
|
#define EATA_FORCE_IO 0x07
|
| 138 |
|
|
|
| 139 |
|
|
#define HA_CTRLREG 0x206 /* control register for HBA */
|
| 140 |
|
|
#define HA_CTRL_DISINT 0x02 /* CTRLREG: disable interrupts */
|
| 141 |
|
|
#define HA_CTRL_RESCPU 0x04 /* CTRLREG: reset processor */
|
| 142 |
|
|
#define HA_CTRL_8HEADS 0x08 /* CTRLREG: set for drives with*
|
| 143 |
|
|
* >=8 heads (WD1003 rudimentary :-) */
|
| 144 |
|
|
|
| 145 |
|
|
#define HA_WCOMMAND 0x07 /* command register offset */
|
| 146 |
|
|
#define HA_WIFC 0x06 /* immediate command offset */
|
| 147 |
|
|
#define HA_WCODE 0x05
|
| 148 |
|
|
#define HA_WCODE2 0x04
|
| 149 |
|
|
#define HA_WDMAADDR 0x02 /* DMA address LSB offset */
|
| 150 |
|
|
#define HA_RAUXSTAT 0x08 /* aux status register offset*/
|
| 151 |
|
|
#define HA_RSTATUS 0x07 /* status register offset */
|
| 152 |
|
|
#define HA_RDATA 0x00 /* data register (16bit) */
|
| 153 |
|
|
#define HA_WDATA 0x00 /* data register (16bit) */
|
| 154 |
|
|
|
| 155 |
|
|
#define HA_ABUSY 0x01 /* aux busy bit */
|
| 156 |
|
|
#define HA_AIRQ 0x02 /* aux IRQ pending bit */
|
| 157 |
|
|
#define HA_SERROR 0x01 /* pr. command ended in error*/
|
| 158 |
|
|
#define HA_SMORE 0x02 /* more data soon to come */
|
| 159 |
|
|
#define HA_SCORR 0x04 /* data corrected */
|
| 160 |
|
|
#define HA_SDRQ 0x08 /* data request active */
|
| 161 |
|
|
#define HA_SSC 0x10 /* seek complete */
|
| 162 |
|
|
#define HA_SFAULT 0x20 /* write fault */
|
| 163 |
|
|
#define HA_SREADY 0x40 /* drive ready */
|
| 164 |
|
|
#define HA_SBUSY 0x80 /* drive busy */
|
| 165 |
|
|
#define HA_SDRDY HA_SSC+HA_SREADY+HA_SDRQ
|
| 166 |
|
|
|
| 167 |
|
|
/**********************************************
|
| 168 |
|
|
* Message definitions *
|
| 169 |
|
|
**********************************************/
|
| 170 |
|
|
|
| 171 |
|
|
#define HA_NO_ERROR 0x00 /* No Error */
|
| 172 |
|
|
#define HA_ERR_SEL_TO 0x01 /* Selection Timeout */
|
| 173 |
|
|
#define HA_ERR_CMD_TO 0x02 /* Command Timeout */
|
| 174 |
|
|
#define HA_BUS_RESET 0x03 /* SCSI Bus Reset Received */
|
| 175 |
|
|
#define HA_INIT_POWERUP 0x04 /* Initial Controller Power-up */
|
| 176 |
|
|
#define HA_UNX_BUSPHASE 0x05 /* Unexpected Bus Phase */
|
| 177 |
|
|
#define HA_UNX_BUS_FREE 0x06 /* Unexpected Bus Free */
|
| 178 |
|
|
#define HA_BUS_PARITY 0x07 /* Bus Parity Error */
|
| 179 |
|
|
#define HA_SCSI_HUNG 0x08 /* SCSI Hung */
|
| 180 |
|
|
#define HA_UNX_MSGRJCT 0x09 /* Unexpected Message Rejected */
|
| 181 |
|
|
#define HA_RESET_STUCK 0x0a /* SCSI Bus Reset Stuck */
|
| 182 |
|
|
#define HA_RSENSE_FAIL 0x0b /* Auto Request-Sense Failed */
|
| 183 |
|
|
#define HA_PARITY_ERR 0x0c /* Controller Ram Parity Error */
|
| 184 |
|
|
#define HA_CP_ABORT_NA 0x0d /* Abort Message sent to non-active cmd */
|
| 185 |
|
|
#define HA_CP_ABORTED 0x0e /* Abort Message sent to active cmd */
|
| 186 |
|
|
#define HA_CP_RESET_NA 0x0f /* Reset Message sent to non-active cmd */
|
| 187 |
|
|
#define HA_CP_RESET 0x10 /* Reset Message sent to active cmd */
|
| 188 |
|
|
#define HA_ECC_ERR 0x11 /* Controller Ram ECC Error */
|
| 189 |
|
|
#define HA_PCI_PARITY 0x12 /* PCI Parity Error */
|
| 190 |
|
|
#define HA_PCI_MABORT 0x13 /* PCI Master Abort */
|
| 191 |
|
|
#define HA_PCI_TABORT 0x14 /* PCI Target Abort */
|
| 192 |
|
|
#define HA_PCI_STABORT 0x15 /* PCI Signaled Target Abort */
|
| 193 |
|
|
|
| 194 |
|
|
/**********************************************
|
| 195 |
|
|
* Other definitions *
|
| 196 |
|
|
**********************************************/
|
| 197 |
|
|
|
| 198 |
|
|
struct reg_bit { /* reading this one will clear the interrupt */
|
| 199 |
|
|
__u8 error:1; /* previous command ended in an error */
|
| 200 |
|
|
__u8 more:1; /* more DATA coming soon, poll BSY & DRQ (PIO) */
|
| 201 |
|
|
__u8 corr:1; /* data read was successfully corrected with ECC*/
|
| 202 |
|
|
__u8 drq:1; /* data request active */
|
| 203 |
|
|
__u8 sc:1; /* seek complete */
|
| 204 |
|
|
__u8 fault:1; /* write fault */
|
| 205 |
|
|
__u8 ready:1; /* drive ready */
|
| 206 |
|
|
__u8 busy:1; /* controller busy */
|
| 207 |
|
|
};
|
| 208 |
|
|
|
| 209 |
|
|
struct reg_abit { /* reading this won't clear the interrupt */
|
| 210 |
|
|
__u8 abusy:1; /* auxiliary busy */
|
| 211 |
|
|
__u8 irq:1; /* set when drive interrupt is asserted */
|
| 212 |
|
|
__u8 dummy:6;
|
| 213 |
|
|
};
|
| 214 |
|
|
|
| 215 |
|
|
struct eata_register { /* EATA register set */
|
| 216 |
|
|
__u8 data_reg[2]; /* R, couldn't figure this one out */
|
| 217 |
|
|
__u8 cp_addr[4]; /* W, CP address register */
|
| 218 |
|
|
union {
|
| 219 |
|
|
__u8 command; /* W, command code: [read|set] conf, send CP*/
|
| 220 |
|
|
struct reg_bit status; /* R, see register_bit1 */
|
| 221 |
|
|
__u8 statusbyte;
|
| 222 |
|
|
} ovr;
|
| 223 |
|
|
struct reg_abit aux_stat; /* R, see register_bit2 */
|
| 224 |
|
|
};
|
| 225 |
|
|
|
| 226 |
|
|
struct get_conf { /* Read Configuration Array */
|
| 227 |
|
|
__u32 len; /* Should return 0x22, 0x24, etc */
|
| 228 |
|
|
__u32 signature; /* Signature MUST be "EATA" */
|
| 229 |
|
|
__u8 version2:4,
|
| 230 |
|
|
version:4; /* EATA Version level */
|
| 231 |
|
|
__u8 OCS_enabled:1, /* Overlap Command Support enabled */
|
| 232 |
|
|
TAR_support:1, /* SCSI Target Mode supported */
|
| 233 |
|
|
TRNXFR:1, /* Truncate Transfer Cmd not necessary *
|
| 234 |
|
|
* Only used in PIO Mode */
|
| 235 |
|
|
MORE_support:1, /* MORE supported (only PIO Mode) */
|
| 236 |
|
|
DMA_support:1, /* DMA supported Driver uses only *
|
| 237 |
|
|
* this mode */
|
| 238 |
|
|
DMA_valid:1, /* DRQ value in Byte 30 is valid */
|
| 239 |
|
|
ATA:1, /* ATA device connected (not supported) */
|
| 240 |
|
|
HAA_valid:1; /* Hostadapter Address is valid */
|
| 241 |
|
|
|
| 242 |
|
|
__u16 cppadlen; /* Number of pad bytes send after CD data *
|
| 243 |
|
|
* set to zero for DMA commands */
|
| 244 |
|
|
__u8 scsi_id[4]; /* SCSI ID of controller 2-0 Byte 0 res. *
|
| 245 |
|
|
* if not, zero is returned */
|
| 246 |
|
|
__u32 cplen; /* CP length: number of valid cp bytes */
|
| 247 |
|
|
__u32 splen; /* Number of bytes returned after *
|
| 248 |
|
|
* Receive SP command */
|
| 249 |
|
|
__u16 queuesiz; /* max number of queueable CPs */
|
| 250 |
|
|
__u16 dummy;
|
| 251 |
|
|
__u16 SGsiz; /* max number of SG table entries */
|
| 252 |
|
|
__u8 IRQ:4, /* IRQ used this HA */
|
| 253 |
|
|
IRQ_TR:1, /* IRQ Trigger: 0=edge, 1=level */
|
| 254 |
|
|
SECOND:1, /* This is a secondary controller */
|
| 255 |
|
|
DMA_channel:2; /* DRQ index, DRQ is 2comp of DRQX */
|
| 256 |
|
|
__u8 sync; /* device at ID 7 tru 0 is running in *
|
| 257 |
|
|
* synchronous mode, this will disappear */
|
| 258 |
|
|
__u8 DSBLE:1, /* ISA i/o addressing is disabled */
|
| 259 |
|
|
FORCADR:1, /* i/o address has been forced */
|
| 260 |
|
|
SG_64K:1,
|
| 261 |
|
|
SG_UAE:1,
|
| 262 |
|
|
:4;
|
| 263 |
|
|
__u8 MAX_ID:5, /* Max number of SCSI target IDs */
|
| 264 |
|
|
MAX_CHAN:3; /* Number of SCSI busses on HBA */
|
| 265 |
|
|
__u8 MAX_LUN; /* Max number of LUNs */
|
| 266 |
|
|
__u8 :3,
|
| 267 |
|
|
AUTOTRM:1,
|
| 268 |
|
|
M1_inst:1,
|
| 269 |
|
|
ID_qest:1, /* Raidnum ID is questionable */
|
| 270 |
|
|
is_PCI:1, /* HBA is PCI */
|
| 271 |
|
|
is_EISA:1; /* HBA is EISA */
|
| 272 |
|
|
__u8 RAIDNUM; /* unique HBA identifier */
|
| 273 |
|
|
__u8 unused[474];
|
| 274 |
|
|
};
|
| 275 |
|
|
|
| 276 |
|
|
struct eata_sg_list
|
| 277 |
|
|
{
|
| 278 |
|
|
__u32 data;
|
| 279 |
|
|
__u32 len;
|
| 280 |
|
|
};
|
| 281 |
|
|
|
| 282 |
|
|
struct eata_ccb { /* Send Command Packet structure */
|
| 283 |
|
|
|
| 284 |
|
|
__u8 SCSI_Reset:1, /* Cause a SCSI Bus reset on the cmd */
|
| 285 |
|
|
HBA_Init:1, /* Cause Controller to reinitialize */
|
| 286 |
|
|
Auto_Req_Sen:1, /* Do Auto Request Sense on errors */
|
| 287 |
|
|
scatter:1, /* Data Ptr points to a SG Packet */
|
| 288 |
|
|
Resrvd:1, /* RFU */
|
| 289 |
|
|
Interpret:1, /* Interpret the SCSI cdb of own use */
|
| 290 |
|
|
DataOut:1, /* Data Out phase with command */
|
| 291 |
|
|
DataIn:1; /* Data In phase with command */
|
| 292 |
|
|
__u8 reqlen; /* Request Sense Length *
|
| 293 |
|
|
* Valid if Auto_Req_Sen=1 */
|
| 294 |
|
|
__u8 unused[3];
|
| 295 |
|
|
__u8 FWNEST:1, /* send cmd to phys RAID component */
|
| 296 |
|
|
unused2:7;
|
| 297 |
|
|
__u8 Phsunit:1, /* physical unit on mirrored pair */
|
| 298 |
|
|
I_AT:1, /* inhibit address translation */
|
| 299 |
|
|
I_HBA_C:1, /* HBA inhibit caching */
|
| 300 |
|
|
unused3:5;
|
| 301 |
|
|
|
| 302 |
|
|
__u8 cp_id:5, /* SCSI Device ID of target */
|
| 303 |
|
|
cp_channel:3; /* SCSI Channel # of HBA */
|
| 304 |
|
|
__u8 cp_lun:3,
|
| 305 |
|
|
:2,
|
| 306 |
|
|
cp_luntar:1, /* CP is for target ROUTINE */
|
| 307 |
|
|
cp_dispri:1, /* Grant disconnect privilege */
|
| 308 |
|
|
cp_identify:1; /* Always TRUE */
|
| 309 |
|
|
__u8 cp_msg1; /* Message bytes 0-3 */
|
| 310 |
|
|
__u8 cp_msg2;
|
| 311 |
|
|
__u8 cp_msg3;
|
| 312 |
|
|
__u8 cp_cdb[12]; /* Command Descriptor Block */
|
| 313 |
|
|
__u32 cp_datalen; /* Data Transfer Length *
|
| 314 |
|
|
* If scatter=1 len of sg package */
|
| 315 |
|
|
void *cp_viraddr; /* address of this ccb */
|
| 316 |
|
|
__u32 cp_dataDMA; /* Data Address, if scatter=1 *
|
| 317 |
|
|
* address of scatter packet */
|
| 318 |
|
|
__u32 cp_statDMA; /* address for Status Packet */
|
| 319 |
|
|
__u32 cp_reqDMA; /* Request Sense Address, used if *
|
| 320 |
|
|
* CP command ends with error */
|
| 321 |
|
|
/* Additional CP info begins here */
|
| 322 |
|
|
__u32 timestamp; /* Needed to measure command latency */
|
| 323 |
|
|
__u32 timeout;
|
| 324 |
|
|
__u8 sizeindex;
|
| 325 |
|
|
__u8 rw_latency;
|
| 326 |
|
|
__u8 retries;
|
| 327 |
|
|
__u8 status; /* status of this queueslot */
|
| 328 |
|
|
Scsi_Cmnd *cmd; /* address of cmd */
|
| 329 |
|
|
struct eata_sg_list *sg_list;
|
| 330 |
|
|
};
|
| 331 |
|
|
|
| 332 |
|
|
|
| 333 |
|
|
struct eata_sp {
|
| 334 |
|
|
__u8 hba_stat:7, /* HBA status */
|
| 335 |
|
|
EOC:1; /* True if command finished */
|
| 336 |
|
|
__u8 scsi_stat; /* Target SCSI status */
|
| 337 |
|
|
__u8 reserved[2];
|
| 338 |
|
|
__u32 residue_len; /* Number of bytes not transferred */
|
| 339 |
|
|
struct eata_ccb *ccb; /* Address set in COMMAND PACKET */
|
| 340 |
|
|
__u8 msg[12];
|
| 341 |
|
|
};
|
| 342 |
|
|
|
| 343 |
|
|
typedef struct hstd {
|
| 344 |
|
|
__u8 vendor[9];
|
| 345 |
|
|
__u8 name[18];
|
| 346 |
|
|
__u8 revision[6];
|
| 347 |
|
|
__u8 EATA_revision;
|
| 348 |
|
|
__u32 firmware_revision;
|
| 349 |
|
|
__u8 HBA_number;
|
| 350 |
|
|
__u8 bustype; /* bustype of HBA */
|
| 351 |
|
|
__u8 channel; /* # of avail. scsi channels */
|
| 352 |
|
|
__u8 state; /* state of HBA */
|
| 353 |
|
|
__u8 primary; /* true if primary */
|
| 354 |
|
|
__u8 more_support:1, /* HBA supports MORE flag */
|
| 355 |
|
|
immediate_support:1, /* HBA supports IMMEDIATE CMDs*/
|
| 356 |
|
|
broken_INQUIRY:1; /* This is an EISA HBA with *
|
| 357 |
|
|
* broken INQUIRY */
|
| 358 |
|
|
__u8 do_latency; /* Latency measurement flag */
|
| 359 |
|
|
__u32 reads[13];
|
| 360 |
|
|
__u32 writes[13];
|
| 361 |
|
|
__u32 reads_lat[12][4];
|
| 362 |
|
|
__u32 writes_lat[12][4];
|
| 363 |
|
|
__u32 all_lat[4];
|
| 364 |
|
|
__u8 resetlevel[MAXCHANNEL];
|
| 365 |
|
|
__u32 last_ccb; /* Last used ccb */
|
| 366 |
|
|
__u32 cplen; /* size of CP in words */
|
| 367 |
|
|
__u16 cppadlen; /* pad length of cp in words */
|
| 368 |
|
|
__u16 queuesize;
|
| 369 |
|
|
__u16 sgsize; /* # of entries in the SG list*/
|
| 370 |
|
|
__u16 devflags; /* bits set for detected devices */
|
| 371 |
|
|
__u8 hostid; /* SCSI ID of HBA */
|
| 372 |
|
|
__u8 moresupport; /* HBA supports MORE flag */
|
| 373 |
|
|
struct Scsi_Host *next;
|
| 374 |
|
|
struct Scsi_Host *prev;
|
| 375 |
|
|
struct eata_sp sp; /* status packet */
|
| 376 |
|
|
struct eata_ccb ccb[0]; /* ccb array begins here */
|
| 377 |
|
|
}hostdata;
|
| 378 |
|
|
|
| 379 |
|
|
/* structure for max. 2 emulated drives */
|
| 380 |
|
|
struct drive_geom_emul {
|
| 381 |
|
|
__u8 trans; /* translation flag 1=transl */
|
| 382 |
|
|
__u8 channel; /* SCSI channel number */
|
| 383 |
|
|
__u8 HBA; /* HBA number (prim/sec) */
|
| 384 |
|
|
__u8 id; /* drive id */
|
| 385 |
|
|
__u8 lun; /* drive lun */
|
| 386 |
|
|
__u32 heads; /* number of heads */
|
| 387 |
|
|
__u32 sectors; /* number of sectors */
|
| 388 |
|
|
__u32 cylinder; /* number of cylinders */
|
| 389 |
|
|
};
|
| 390 |
|
|
|
| 391 |
|
|
struct geom_emul {
|
| 392 |
|
|
__u8 bios_drives; /* number of emulated drives */
|
| 393 |
|
|
struct drive_geom_emul drv[2]; /* drive structures */
|
| 394 |
|
|
};
|
| 395 |
|
|
|
| 396 |
|
|
#endif /* _EATA_GENERIC_H */
|
| 397 |
|
|
|
| 398 |
|
|
/*
|
| 399 |
|
|
* Overrides for Emacs so that we almost follow Linus's tabbing style.
|
| 400 |
|
|
* Emacs will notice this stuff at the end of the file and automatically
|
| 401 |
|
|
* adjust the settings for this buffer only. This must remain at the end
|
| 402 |
|
|
* of the file.
|
| 403 |
|
|
* ---------------------------------------------------------------------------
|
| 404 |
|
|
* Local variables:
|
| 405 |
|
|
* c-indent-level: 4
|
| 406 |
|
|
* c-brace-imaginary-offset: 0
|
| 407 |
|
|
* c-brace-offset: -4
|
| 408 |
|
|
* c-argdecl-indent: 4
|
| 409 |
|
|
* c-label-offset: -4
|
| 410 |
|
|
* c-continued-statement-offset: 4
|
| 411 |
|
|
* c-continued-brace-offset: 0
|
| 412 |
|
|
* tab-width: 8
|
| 413 |
|
|
* End:
|
| 414 |
|
|
*/
|
