OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [gvp11.h] - Blame information for rev 1772

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 1626 jcastillo
#ifndef GVP11_H
2
 
3
/* $Id: gvp11.h,v 1.1 2005-12-20 10:17:45 jcastillo Exp $
4
 *
5
 * Header file for the GVP Series II SCSI controller for Linux
6
 *
7
 * Written and (C) 1993, Ralf Baechle, see gvp11.c for more info
8
 * based on a2091.h (C) 1993 by Hamish Macdonald
9
 *
10
 */
11
 
12
#include <linux/types.h>
13
 
14
int gvp11_detect(Scsi_Host_Template *);
15
const char *wd33c93_info(void);
16
int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
17
int wd33c93_abort(Scsi_Cmnd *);
18
int wd33c93_reset(Scsi_Cmnd *, unsigned int);
19
 
20
#ifndef NULL
21
#define NULL 0
22
#endif
23
 
24
#ifndef CMD_PER_LUN
25
#define CMD_PER_LUN 2
26
#endif
27
 
28
#ifndef CAN_QUEUE
29
#define CAN_QUEUE 16
30
#endif
31
 
32
#ifdef HOSTS_C
33
 
34
extern struct proc_dir_entry proc_scsi_gvp11;
35
 
36
#define GVP11_SCSI {  /* next */                NULL,            \
37
                      /* usage_count */         NULL,            \
38
                      /* proc_dir_entry */      &proc_scsi_gvp11, \
39
                      /* proc_info */           NULL,            \
40
                      /* name */                "GVP Series II SCSI", \
41
                      /* detect */              gvp11_detect,    \
42
                      /* release */             NULL,            \
43
                      /* info */                NULL,            \
44
                      /* command */             NULL,            \
45
                      /* queuecommand */        wd33c93_queuecommand, \
46
                      /* abort */               wd33c93_abort,   \
47
                      /* reset */               wd33c93_reset,   \
48
                      /* slave_attach */        NULL,            \
49
                      /* bios_param */          NULL,            \
50
                      /* can_queue */           CAN_QUEUE,       \
51
                      /* this_id */             7,               \
52
                      /* sg_tablesize */        SG_ALL,          \
53
                      /* cmd_per_lun */         CMD_PER_LUN,     \
54
                      /* present */             0,               \
55
                      /* unchecked_isa_dma */   0,               \
56
                      /* use_clustering */      DISABLE_CLUSTERING }
57
#else
58
 
59
/*
60
 * if the transfer address ANDed with this results in a non-zero
61
 * result, then we can't use DMA.
62
 */
63
#define GVP11_XFER_MASK  (0xff000001)
64
 
65
typedef struct {
66
             unsigned char      pad1[64];
67
    volatile unsigned short     CNTR;
68
             unsigned char      pad2[31];
69
    volatile unsigned char      SASR;
70
             unsigned char      pad3;
71
    volatile unsigned char      SCMD;
72
             unsigned char      pad4[4];
73
    volatile unsigned short     BANK;
74
             unsigned char      pad5[6];
75
    volatile unsigned long      ACR;
76
    volatile unsigned short     secret1; /* store 0 here */
77
    volatile unsigned short     ST_DMA;
78
    volatile unsigned short     SP_DMA;
79
    volatile unsigned short     secret2; /* store 1 here */
80
    volatile unsigned short     secret3; /* store 15 here */
81
} gvp11_scsiregs;
82
 
83
/* bits in CNTR */
84
#define GVP11_DMAC_BUSY         (1<<0)
85
#define GVP11_DMAC_INT_PENDING  (1<<1)
86
#define GVP11_DMAC_INT_ENABLE   (1<<3)
87
#define GVP11_DMAC_DIR_WRITE    (1<<4)
88
 
89
#endif /* else def HOSTS_C */
90
 
91
#endif /* GVP11_H */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.