OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [i91uscsi.h] - Blame information for rev 1777

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 1626 jcastillo 
/**************************************************************************
2 
 * Initio 9100 device driver for Linux.
3 
 *
4 
 * Copyright (c) 1994-1998 Initio Corporation
5 
 * All rights reserved.
6 
 *
7 
 * This program is free software; you can redistribute it and/or modify
8 
 * it under the terms of the GNU General Public License as published by
9 
 * the Free Software Foundation; either version 2, or (at your option)
10 
 * any later version.
11 
 *
12 
 * This program is distributed in the hope that it will be useful,
13 
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15 
 * GNU General Public License for more details.
16 
 *
17 
 * You should have received a copy of the GNU General Public License
18 
 * along with this program; see the file COPYING.  If not, write to
19 
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
20 
 *
21 
 * --------------------------------------------------------------------------
22 
 *
23 
 * Redistribution and use in source and binary forms, with or without
24 
 * modification, are permitted provided that the following conditions
25 
 * are met:
26 
 * 1. Redistributions of source code must retain the above copyright
27 
 *    notice, this list of conditions, and the following disclaimer,
28 
 *    without modification, immediately at the beginning of the file.
29 
 * 2. Redistributions in binary form must reproduce the above copyright
30 
 *    notice, this list of conditions and the following disclaimer in the
31 
 *    documentation and/or other materials provided with the distribution.
32 
 * 3. The name of the author may not be used to endorse or promote products
33 
 *    derived from this software without specific prior written permission.
34 
 *
35 
 * Where this Software is combined with software released under the terms of
36 
 * the GNU Public License ("GPL") and the terms of the GPL would require the
37 
 * combined work to also be released under the terms of the GPL, the terms
38 
 * and conditions of this License will apply in addition to those of the
39 
 * GPL with the exception of any terms or conditions of this License that
40 
 * conflict with, or are expressly prohibited by, the GPL.
41 
 *
42 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
43 
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
44 
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
45 
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
46 
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
47 
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
48 
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
49 
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
50 
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
51 
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
52 
 * SUCH DAMAGE.
53 
 *
54 
 **************************************************************************/
55 
 
56 
#include <linux/config.h>
57 
 
58 
#define ULONG   unsigned long
59 
#define USHORT  unsigned short
60 
#define UCHAR   unsigned char
61 
#define BYTE    unsigned char
62 
#define WORD    unsigned short
63 
#define DWORD   unsigned long
64 
#define UBYTE   unsigned char
65 
#define UWORD   unsigned short
66 
#define UDWORD  unsigned long
67 
#ifdef ALPHA
68 
#define U32     unsigned int
69 
#else
70 
#define U32     unsigned long
71 
#endif
72 
 
73 
#ifndef NULL
74 
#define NULL     0              /* zero          */
75 
#endif
76 
#ifndef TRUE
77 
#define TRUE     (1)            /* boolean true  */
78 
#endif
79 
#ifndef FALSE
80 
#define FALSE    (0)            /* boolean false */
81 
#endif
82 
#ifndef FAILURE
83 
#define FAILURE  (-1)
84 
#endif
85 
 
86 
#define TOTAL_SG_ENTRY          32
87 
#define MAX_SUPPORTED_ADAPTERS  8
88 
#define MAX_OFFSET              15
89 
#define MAX_TARGETS             16
90 
 
91 
#define INI_VENDOR_ID   0x1101  /* Initio's PCI vendor ID       */
92 
#define I950_DEVICE_ID  0x9500  /* Initio's inic-950 product ID   */
93 
#define I940_DEVICE_ID  0x9400  /* Initio's inic-940 product ID   */
94 
#define I935_DEVICE_ID  0x9401  /* Initio's inic-935 product ID   */
95 
 
96 
#define _I91USCSI_H
97 
 
98 
typedef struct {
99 
        unsigned short base;
100 
        unsigned short vec;
101 
} i91u_config;
102 
 
103 
/***************************************/
104 
/*  Tulip Configuration Register Set */
105 
/***************************************/
106 
#define TUL_PVID        0x00    /* Vendor ID                    */
107 
#define TUL_PDID        0x02    /* Device ID                    */
108 
#define TUL_PCMD        0x04    /* Command                      */
109 
#define TUL_PSTUS       0x06    /* Status                       */
110 
#define TUL_PRID        0x08    /* Revision number              */
111 
#define TUL_PPI         0x09    /* Programming interface        */
112 
#define TUL_PSC         0x0A    /* Sub Class                    */
113 
#define TUL_PBC         0x0B    /* Base Class                   */
114 
#define TUL_PCLS        0x0C    /* Cache line size              */
115 
#define TUL_PLTR        0x0D    /* Latency timer                */
116 
#define TUL_PHDT        0x0E    /* Header type                  */
117 
#define TUL_PBIST       0x0F    /* BIST                         */
118 
#define TUL_PBAD        0x10    /* Base address                 */
119 
#define TUL_PBAD1       0x14    /* Base address                 */
120 
#define TUL_PBAD2       0x18    /* Base address                 */
121 
#define TUL_PBAD3       0x1C    /* Base address                 */
122 
#define TUL_PBAD4       0x20    /* Base address                 */
123 
#define TUL_PBAD5       0x24    /* Base address                 */
124 
#define TUL_PRSVD       0x28    /* Reserved                     */
125 
#define TUL_PRSVD1      0x2C    /* Reserved                     */
126 
#define TUL_PRAD        0x30    /* Expansion ROM base address   */
127 
#define TUL_PRSVD2      0x34    /* Reserved                     */
128 
#define TUL_PRSVD3      0x38    /* Reserved                     */
129 
#define TUL_PINTL       0x3C    /* Interrupt line               */
130 
#define TUL_PINTP       0x3D    /* Interrupt pin                */
131 
#define TUL_PIGNT       0x3E    /* MIN_GNT                      */
132 
#define TUL_PMGNT       0x3F    /* MAX_GNT                      */
133 
 
134 
/************************/
135 
/*  Jasmin Register Set */
136 
/************************/
137 
#define TUL_HACFG0      0x40    /* H/A Configuration Register 0         */
138 
#define TUL_HACFG1      0x41    /* H/A Configuration Register 1         */
139 
#define TUL_HACFG2      0x42    /* H/A Configuration Register 2         */
140 
 
141 
#define TUL_SDCFG0      0x44    /* SCSI Device Configuration 0          */
142 
#define TUL_SDCFG1      0x45    /* SCSI Device Configuration 1          */
143 
#define TUL_SDCFG2      0x46    /* SCSI Device Configuration 2          */
144 
#define TUL_SDCFG3      0x47    /* SCSI Device Configuration 3          */
145 
 
146 
#define TUL_GINTS       0x50    /* Global Interrupt Status Register     */
147 
#define TUL_GIMSK       0x52    /* Global Interrupt MASK Register       */
148 
#define TUL_GCTRL       0x54    /* Global Control Register              */
149 
#define TUL_GCTRL_EEPROM_BIT    0x04
150 
#define TUL_GCTRL1      0x55    /* Global Control Register              */
151 
#define TUL_DMACFG      0x5B    /* DMA configuration                    */
152 
#define TUL_NVRAM       0x5D    /* Non-volatile RAM port                */
153 
 
154 
#define TUL_SCnt0       0x80    /* 00 R/W Transfer Counter Low          */
155 
#define TUL_SCnt1       0x81    /* 01 R/W Transfer Counter Mid          */
156 
#define TUL_SCnt2       0x82    /* 02 R/W Transfer Count High           */
157 
#define TUL_SFifoCnt    0x83    /* 03 R   FIFO counter                  */
158 
#define TUL_SIntEnable  0x84    /* 03 W   Interrupt enble               */
159 
#define TUL_SInt        0x84    /* 04 R   Interrupt Register            */
160 
#define TUL_SCtrl0      0x85    /* 05 W   Control 0                     */
161 
#define TUL_SStatus0    0x85    /* 05 R   Status 0                      */
162 
#define TUL_SCtrl1      0x86    /* 06 W   Control 1                     */
163 
#define TUL_SStatus1    0x86    /* 06 R   Status 1                      */
164 
#define TUL_SConfig     0x87    /* 07 W   Configuration                 */
165 
#define TUL_SStatus2    0x87    /* 07 R   Status 2                      */
166 
#define TUL_SPeriod     0x88    /* 08 W   Sync. Transfer Period & Offset */
167 
#define TUL_SOffset     0x88    /* 08 R   Offset                        */
168 
#define TUL_SScsiId     0x89    /* 09 W   SCSI ID                       */
169 
#define TUL_SBusId      0x89    /* 09 R   SCSI BUS ID                   */
170 
#define TUL_STimeOut    0x8A    /* 0A W   Sel/Resel Time Out Register   */
171 
#define TUL_SIdent      0x8A    /* 0A R   Identify Message Register     */
172 
#define TUL_SAvail      0x8A    /* 0A R   Availiable Counter Register   */
173 
#define TUL_SData       0x8B    /* 0B R/W SCSI data in/out              */
174 
#define TUL_SFifo       0x8C    /* 0C R/W FIFO                          */
175 
#define TUL_SSignal     0x90    /* 10 R/W SCSI signal in/out            */
176 
#define TUL_SCmd        0x91    /* 11 R/W Command                       */
177 
#define TUL_STest0      0x92    /* 12 R/W Test0                         */
178 
#define TUL_STest1      0x93    /* 13 R/W Test1                         */
179 
#define TUL_SCFG1       0x94    /* 14 R/W Configuration                 */
180 
 
181 
#define TUL_XAddH       0xC0    /*DMA Transfer Physical Address         */
182 
#define TUL_XAddW       0xC8    /*DMA Current Transfer Physical Address */
183 
#define TUL_XCntH       0xD0    /*DMA Transfer Counter                  */
184 
#define TUL_XCntW       0xD4    /*DMA Current Transfer Counter          */
185 
#define TUL_XCmd        0xD8    /*DMA Command Register                  */
186 
#define TUL_Int         0xDC    /*Interrupt Register                    */
187 
#define TUL_XStatus     0xDD    /*DMA status Register                   */
188 
#define TUL_Mask        0xE0    /*Interrupt Mask Register               */
189 
#define TUL_XCtrl       0xE4    /*DMA Control Register                  */
190 
#define TUL_XCtrl1      0xE5    /*DMA Control Register 1                */
191 
#define TUL_XFifo       0xE8    /*DMA FIFO                              */
192 
 
193 
#define TUL_WCtrl       0xF7    /*Bus master wait state control         */
194 
#define TUL_DCtrl       0xFB    /*DMA delay control                     */
195 
 
196 
/*----------------------------------------------------------------------*/
197 
/*   bit definition for Command register of Configuration Space Header  */
198 
/*----------------------------------------------------------------------*/
199 
#define BUSMS           0x04    /* BUS MASTER Enable                    */
200 
#define IOSPA           0x01    /* IO Space Enable                      */
201 
 
202 
/*----------------------------------------------------------------------*/
203 
/* Command Codes of Tulip SCSI Command register                         */
204 
/*----------------------------------------------------------------------*/
205 
#define TSC_EN_RESEL    0x80    /* Enable Reselection                   */
206 
#define TSC_CMD_COMP    0x84    /* Command Complete Sequence            */
207 
#define TSC_SEL         0x01    /* Select Without ATN Sequence          */
208 
#define TSC_SEL_ATN     0x11    /* Select With ATN Sequence             */
209 
#define TSC_SEL_ATN_DMA 0x51    /* Select With ATN Sequence with DMA    */
210 
#define TSC_SEL_ATN3    0x31    /* Select With ATN3 Sequence            */
211 
#define TSC_SEL_ATNSTOP 0x12    /* Select With ATN and Stop Sequence    */
212 
#define TSC_SELATNSTOP  0x1E    /* Select With ATN and Stop Sequence    */
213 
 
214 
#define TSC_SEL_ATN_DIRECT_IN   0x95    /* Select With ATN Sequence     */
215 
#define TSC_SEL_ATN_DIRECT_OUT  0x15    /* Select With ATN Sequence     */
216 
#define TSC_SEL_ATN3_DIRECT_IN  0xB5    /* Select With ATN3 Sequence    */
217 
#define TSC_SEL_ATN3_DIRECT_OUT 0x35    /* Select With ATN3 Sequence    */
218 
#define TSC_XF_DMA_OUT_DIRECT   0x06    /* DMA Xfer Infomation out      */
219 
#define TSC_XF_DMA_IN_DIRECT    0x86    /* DMA Xfer Infomation in       */
220 
 
221 
#define TSC_XF_DMA_OUT  0x43    /* DMA Xfer Infomation out              */
222 
#define TSC_XF_DMA_IN   0xC3    /* DMA Xfer Infomation in               */
223 
#define TSC_XF_FIFO_OUT 0x03    /* FIFO Xfer Infomation out             */
224 
#define TSC_XF_FIFO_IN  0x83    /* FIFO Xfer Infomation in              */
225 
 
226 
#define TSC_MSG_ACCEPT  0x0F    /* Message Accept                       */
227 
 
228 
/*----------------------------------------------------------------------*/
229 
/* bit definition for Tulip SCSI Control 0 Register                     */
230 
/*----------------------------------------------------------------------*/
231 
#define TSC_RST_SEQ     0x20    /* Reset sequence counter               */
232 
#define TSC_FLUSH_FIFO  0x10    /* Flush FIFO                           */
233 
#define TSC_ABT_CMD     0x04    /* Abort command (sequence)             */
234 
#define TSC_RST_CHIP    0x02    /* Reset SCSI Chip                      */
235 
#define TSC_RST_BUS     0x01    /* Reset SCSI Bus                       */
236 
 
237 
/*----------------------------------------------------------------------*/
238 
/* bit definition for Tulip SCSI Control 1 Register                     */
239 
/*----------------------------------------------------------------------*/
240 
#define TSC_EN_SCAM     0x80    /* Enable SCAM                          */
241 
#define TSC_TIMER       0x40    /* Select timeout unit                  */
242 
#define TSC_EN_SCSI2    0x20    /* SCSI-2 mode                          */
243 
#define TSC_PWDN        0x10    /* Power down mode                      */
244 
#define TSC_WIDE_CPU    0x08    /* Wide CPU                             */
245 
#define TSC_HW_RESELECT 0x04    /* Enable HW reselect                   */
246 
#define TSC_EN_BUS_OUT  0x02    /* Enable SCSI data bus out latch       */
247 
#define TSC_EN_BUS_IN   0x01    /* Enable SCSI data bus in latch        */
248 
 
249 
/*----------------------------------------------------------------------*/
250 
/* bit definition for Tulip SCSI Configuration Register                 */
251 
/*----------------------------------------------------------------------*/
252 
#define TSC_EN_LATCH    0x80    /* Enable phase latch                   */
253 
#define TSC_INITIATOR   0x40    /* Initiator mode                       */
254 
#define TSC_EN_SCSI_PAR 0x20    /* Enable SCSI parity                   */
255 
#define TSC_DMA_8BIT    0x10    /* Alternate dma 8-bits mode            */
256 
#define TSC_DMA_16BIT   0x08    /* Alternate dma 16-bits mode           */
257 
#define TSC_EN_WDACK    0x04    /* Enable DACK while wide SCSI xfer     */
258 
#define TSC_ALT_PERIOD  0x02    /* Alternate sync period mode           */
259 
#define TSC_DIS_SCSIRST 0x01    /* Disable SCSI bus reset us            */
260 
 
261 
#define TSC_INITDEFAULT (TSC_INITIATOR | TSC_EN_LATCH | TSC_ALT_PERIOD | TSC_DIS_SCSIRST)
262 
 
263 
#define TSC_WIDE_SCSI   0x80    /* Enable Wide SCSI                     */
264 
 
265 
/*----------------------------------------------------------------------*/
266 
/* bit definition for Tulip SCSI signal Register                        */
267 
/*----------------------------------------------------------------------*/
268 
#define TSC_RST_ACK     0x00    /* Release ACK signal                   */
269 
#define TSC_RST_ATN     0x00    /* Release ATN signal                   */
270 
#define TSC_RST_BSY     0x00    /* Release BSY signal                   */
271 
 
272 
#define TSC_SET_ACK     0x40    /* ACK signal                           */
273 
#define TSC_SET_ATN     0x08    /* ATN signal                           */
274 
 
275 
#define TSC_REQI        0x80    /* REQ signal                           */
276 
#define TSC_ACKI        0x40    /* ACK signal                           */
277 
#define TSC_BSYI        0x20    /* BSY signal                           */
278 
#define TSC_SELI        0x10    /* SEL signal                           */
279 
#define TSC_ATNI        0x08    /* ATN signal                           */
280 
#define TSC_MSGI        0x04    /* MSG signal                           */
281 
#define TSC_CDI         0x02    /* C/D signal                           */
282 
#define TSC_IOI         0x01    /* I/O signal                           */
283 
 
284 
 
285 
/*----------------------------------------------------------------------*/
286 
/* bit definition for Tulip SCSI Status 0 Register                      */
287 
/*----------------------------------------------------------------------*/
288 
#define TSS_INT_PENDING 0x80    /* Interrupt pending            */
289 
#define TSS_SEQ_ACTIVE  0x40    /* Sequencer active             */
290 
#define TSS_XFER_CNT    0x20    /* Transfer counter zero        */
291 
#define TSS_FIFO_EMPTY  0x10    /* FIFO empty                   */
292 
#define TSS_PAR_ERROR   0x08    /* SCSI parity error            */
293 
#define TSS_PH_MASK     0x07    /* SCSI phase mask              */
294 
 
295 
/*----------------------------------------------------------------------*/
296 
/* bit definition for Tulip SCSI Status 1 Register                      */
297 
/*----------------------------------------------------------------------*/
298 
#define TSS_STATUS_RCV  0x08    /* Status received              */
299 
#define TSS_MSG_SEND    0x40    /* Message sent                 */
300 
#define TSS_CMD_PH_CMP  0x20    /* command phase done              */
301 
#define TSS_DATA_PH_CMP 0x10    /* Data phase done              */
302 
#define TSS_STATUS_SEND 0x08    /* Status sent                  */
303 
#define TSS_XFER_CMP    0x04    /* Transfer completed           */
304 
#define TSS_SEL_CMP     0x02    /* Selection completed          */
305 
#define TSS_ARB_CMP     0x01    /* Arbitration completed        */
306 
 
307 
/*----------------------------------------------------------------------*/
308 
/* bit definition for Tulip SCSI Status 2 Register                      */
309 
/*----------------------------------------------------------------------*/
310 
#define TSS_CMD_ABTED   0x80    /* Command aborted              */
311 
#define TSS_OFFSET_0    0x40    /* Offset counter zero          */
312 
#define TSS_FIFO_FULL   0x20    /* FIFO full                    */
313 
#define TSS_TIMEOUT_0   0x10    /* Timeout counter zero         */
314 
#define TSS_BUSY_RLS    0x08    /* Busy release                 */
315 
#define TSS_PH_MISMATCH 0x04    /* Phase mismatch               */
316 
#define TSS_SCSI_BUS_EN 0x02    /* SCSI data bus enable         */
317 
#define TSS_SCSIRST     0x01    /* SCSI bus reset in progress   */
318 
 
319 
/*----------------------------------------------------------------------*/
320 
/* bit definition for Tulip SCSI Interrupt Register                     */
321 
/*----------------------------------------------------------------------*/
322 
#define TSS_RESEL_INT   0x80    /* Reselected interrupt         */
323 
#define TSS_SEL_TIMEOUT 0x40    /* Selected/reselected timeout  */
324 
#define TSS_BUS_SERV    0x20
325 
#define TSS_SCSIRST_INT 0x10    /* SCSI bus reset detected      */
326 
#define TSS_DISC_INT    0x08    /* Disconnected interrupt       */
327 
#define TSS_SEL_INT     0x04    /* Select interrupt             */
328 
#define TSS_SCAM_SEL    0x02    /* SCAM selected                */
329 
#define TSS_FUNC_COMP   0x01
330 
 
331 
/*----------------------------------------------------------------------*/
332 
/* SCSI Phase Codes.                                                    */
333 
/*----------------------------------------------------------------------*/
334 
#define DATA_OUT        0
335 
#define DATA_IN         1       /* 4                            */
336 
#define CMD_OUT         2
337 
#define STATUS_IN       3       /* 6                            */
338 
#define MSG_OUT         6       /* 3                            */
339 
#define MSG_IN          7
340 
 
341 
 
342 
 
343 
/*----------------------------------------------------------------------*/
344 
/* Command Codes of Tulip xfer Command register                         */
345 
/*----------------------------------------------------------------------*/
346 
#define TAX_X_FORC      0x02
347 
#define TAX_X_ABT       0x04
348 
#define TAX_X_CLR_FIFO  0x08
349 
 
350 
#define TAX_X_IN        0x21
351 
#define TAX_X_OUT       0x01
352 
#define TAX_SG_IN       0xA1
353 
#define TAX_SG_OUT      0x81
354 
 
355 
/*----------------------------------------------------------------------*/
356 
/* Tulip Interrupt Register                                             */
357 
/*----------------------------------------------------------------------*/
358 
#define XCMP            0x01
359 
#define FCMP            0x02
360 
#define XABT            0x04
361 
#define XERR            0x08
362 
#define SCMP            0x10
363 
#define IPEND           0x80
364 
 
365 
/*----------------------------------------------------------------------*/
366 
/* Tulip DMA Status Register                                            */
367 
/*----------------------------------------------------------------------*/
368 
#define XPEND           0x01    /* Transfer pending             */
369 
#define FEMPTY          0x02    /* FIFO empty                   */
370 
 
371 
 
372 
 
373 
/*----------------------------------------------------------------------*/
374 
/* bit definition for TUL_GCTRL                                         */
375 
/*----------------------------------------------------------------------*/
376 
#define EXTSG           0x80
377 
#define EXTAD           0x60
378 
#define SEG4K           0x08
379 
#define EEPRG           0x04
380 
#define MRMUL           0x02
381 
 
382 
/*----------------------------------------------------------------------*/
383 
/* bit definition for TUL_NVRAM                                         */
384 
/*----------------------------------------------------------------------*/
385 
#define SE2CS           0x08
386 
#define SE2CLK          0x04
387 
#define SE2DO           0x02
388 
#define SE2DI           0x01
389 
 
390 
 
391 
/************************************************************************/
392 
/*              Scatter-Gather Element Structure                        */
393 
/************************************************************************/
394 
typedef struct SG_Struc {
395 
        U32 SG_Ptr;             /* Data Pointer */
396 
        U32 SG_Len;             /* Data Length */
397 
} SG;
398 
 
399 
/***********************************************************************
400 
                SCSI Control Block
401 
************************************************************************/
402 
typedef struct Scsi_Ctrl_Blk {
403 
        struct Scsi_Ctrl_Blk *SCB_NxtScb;
404 
        UBYTE SCB_Status;       /*4 */
405 
        UBYTE SCB_NxtStat;      /*5 */
406 
        UBYTE SCB_Mode;         /*6 */
407 
        UBYTE SCB_Msgin;        /*7 SCB_Res0 */
408 
        UWORD SCB_SGIdx;        /*8 */
409 
        UWORD SCB_SGMax;        /*A */
410 
#ifdef ALPHA
411 
        U32 SCB_Reserved[2];    /*C */
412 
#else
413 
        U32 SCB_Reserved[3];    /*C */
414 
#endif
415 
 
416 
        U32 SCB_XferLen;        /*18 Current xfer len           */
417 
        U32 SCB_TotXLen;        /*1C Total xfer len             */
418 
        U32 SCB_PAddr;          /*20 SCB phy. Addr. */
419 
 
420 
        UBYTE SCB_Opcode;       /*24 SCB command code */
421 
        UBYTE SCB_Flags;        /*25 SCB Flags */
422 
        UBYTE SCB_Target;       /*26 Target Id */
423 
        UBYTE SCB_Lun;          /*27 Lun */
424 
        U32 SCB_BufPtr;         /*28 Data Buffer Pointer */
425 
        U32 SCB_BufLen;         /*2C Data Allocation Length */
426 
        UBYTE SCB_SGLen;        /*30 SG list # */
427 
        UBYTE SCB_SenseLen;     /*31 Sense Allocation Length */
428 
        UBYTE SCB_HaStat;       /*32 */
429 
        UBYTE SCB_TaStat;       /*33 */
430 
        UBYTE SCB_CDBLen;       /*34 CDB Length */
431 
        UBYTE SCB_Ident;        /*35 Identify */
432 
        UBYTE SCB_TagMsg;       /*36 Tag Message */
433 
        UBYTE SCB_TagId;        /*37 Queue Tag */
434 
        UBYTE SCB_CDB[12];      /*38 */
435 
        U32 SCB_SGPAddr;        /*44 SG List/Sense Buf phy. Addr. */
436 
        U32 SCB_SensePtr;       /*48 Sense data pointer */
437 
        void (*SCB_Post) (BYTE *, BYTE *);      /*4C POST routine */
438 
        unsigned char *SCB_Srb; /*50 SRB Pointer */
439 
        SG SCB_SGList[TOTAL_SG_ENTRY];  /*54 Start of SG list */
440 
} SCB;
441 
 
442 
/* Bit Definition for SCB_Status */
443 
#define SCB_RENT        0x01
444 
#define SCB_PEND        0x02
445 
#define SCB_CONTIG      0x04    /* Contigent Allegiance */
446 
#define SCB_SELECT      0x08
447 
#define SCB_BUSY        0x10
448 
#define SCB_DONE        0x20
449 
 
450 
 
451 
/* Opcodes of SCB_Opcode */
452 
#define ExecSCSI        0x1
453 
#define BusDevRst       0x2
454 
#define AbortCmd        0x3
455 
 
456 
 
457 
/* Bit Definition for SCB_Mode */
458 
#define SCM_RSENS       0x01    /* request sense mode */
459 
 
460 
 
461 
/* Bit Definition for SCB_Flags */
462 
#define SCF_DONE        0x01
463 
#define SCF_POST        0x02
464 
#define SCF_SENSE       0x04
465 
#define SCF_DIR         0x18
466 
#define SCF_NO_DCHK     0x00
467 
#define SCF_DIN         0x08
468 
#define SCF_DOUT        0x10
469 
#define SCF_NO_XF       0x18
470 
#define SCF_WR_VF       0x20    /* Write verify turn on         */
471 
#define SCF_POLL        0x40
472 
#define SCF_SG          0x80
473 
 
474 
/* Error Codes for SCB_HaStat */
475 
#define HOST_SEL_TOUT   0x11
476 
#define HOST_DO_DU      0x12
477 
#define HOST_BUS_FREE   0x13
478 
#define HOST_BAD_PHAS   0x14
479 
#define HOST_INV_CMD    0x16
480 
#define HOST_ABORTED    0x1A    /* 07/21/98 */
481 
#define HOST_SCSI_RST   0x1B
482 
#define HOST_DEV_RST    0x1C
483 
 
484 
/* Error Codes for SCB_TaStat */
485 
#define TARGET_CHKCOND  0x02
486 
#define TARGET_BUSY     0x08
487 
#define QUEUE_FULL      0x28
488 
 
489 
/* SCSI MESSAGE */
490 
#define MSG_COMP        0x00
491 
#define MSG_EXTEND      0x01
492 
#define MSG_SDP         0x02
493 
#define MSG_RESTORE     0x03
494 
#define MSG_DISC        0x04
495 
#define MSG_IDE         0x05
496 
#define MSG_ABORT       0x06
497 
#define MSG_REJ         0x07
498 
#define MSG_NOP         0x08
499 
#define MSG_PARITY      0x09
500 
#define MSG_LINK_COMP   0x0A
501 
#define MSG_LINK_FLAG   0x0B
502 
#define MSG_DEVRST      0x0C
503 
#define MSG_ABORT_TAG   0x0D
504 
 
505 
/* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */
506 
#define MSG_STAG        0x20
507 
#define MSG_HTAG        0x21
508 
#define MSG_OTAG        0x22
509 
 
510 
#define MSG_IGNOREWIDE  0x23
511 
 
512 
#define MSG_IDENT   0x80
513 
 
514 
/***********************************************************************
515 
                Target Device Control Structure
516 
**********************************************************************/
517 
 
518 
typedef struct Tar_Ctrl_Struc {
519 
        UWORD TCS_Flags;        /* 0 */
520 
        UBYTE TCS_JS_Period;    /* 2 */
521 
        UBYTE TCS_SConfig0;     /* 3 */
522 
 
523 
        UWORD TCS_DrvFlags;     /* 4 */
524 
        UBYTE TCS_DrvHead;      /* 6 */
525 
        UBYTE TCS_DrvSector;    /* 7 */
526 
} TCS;
527 
 
528 
/***********************************************************************
529 
                Target Device Control Structure
530 
**********************************************************************/
531 
 
532 
/* Bit Definition for TCF_Flags */
533 
#define TCF_SCSI_RATE           0x0007
534 
#define TCF_EN_DISC             0x0008
535 
#define TCF_NO_SYNC_NEGO        0x0010
536 
#define TCF_NO_WDTR             0x0020
537 
#define TCF_EN_255              0x0040
538 
#define TCF_EN_START            0x0080
539 
#define TCF_WDTR_DONE           0x0100
540 
#define TCF_SYNC_DONE           0x0200
541 
#define TCF_BUSY                0x0400
542 
 
543 
 
544 
/* Bit Definition for TCF_DrvFlags */
545 
#define TCF_DRV_BUSY            0x01    /* Indicate target busy(driver) */
546 
#define TCF_DRV_EN_TAG          0x0800
547 
#define TCF_DRV_255_63          0x0400
548 
 
549 
typedef struct I91u_Adpt_Struc {
550 
        UWORD ADPT_BIOS;        /* 0 */
551 
        UWORD ADPT_BASE;        /* 1 */
552 
        UBYTE ADPT_Bus;         /* 2 */
553 
        UBYTE ADPT_Device;      /* 3 */
554 
        UBYTE ADPT_INTR;        /* 4 */
555 
} INI_ADPT_STRUCT;
556 
 
557 
 
558 
/***********************************************************************
559 
              Host Adapter Control Structure
560 
************************************************************************/
561 
typedef struct Ha_Ctrl_Struc {
562 
        UWORD HCS_Base;         /* 00 */
563 
        UWORD HCS_BIOS;         /* 02 */
564 
        UBYTE HCS_Intr;         /* 04 */
565 
        UBYTE HCS_SCSI_ID;      /* 05 */
566 
        UBYTE HCS_MaxTar;       /* 06 */
567 
        UBYTE HCS_NumScbs;      /* 07 */
568 
 
569 
        UBYTE HCS_Flags;        /* 08 */
570 
        UBYTE HCS_Index;        /* 09 */
571 
        UBYTE HCS_HaId;         /* 0A */
572 
        UBYTE HCS_Config;       /* 0B */
573 
        UWORD HCS_IdMask;       /* 0C */
574 
        UBYTE HCS_Semaph;       /* 0E */
575 
        UBYTE HCS_Phase;        /* 0F */
576 
        UBYTE HCS_JSStatus0;    /* 10 */
577 
        UBYTE HCS_JSInt;        /* 11 */
578 
        UBYTE HCS_JSStatus1;    /* 12 */
579 
        UBYTE HCS_SConf1;       /* 13 */
580 
 
581 
        UBYTE HCS_Msg[8];       /* 14 */
582 
        SCB *HCS_NxtAvail;      /* 1C */
583 
        SCB *HCS_Scb;           /* 20 */
584 
        SCB *HCS_ScbEnd;        /* 24 */
585 
        SCB *HCS_NxtPend;       /* 28 */
586 
        SCB *HCS_NxtContig;     /* 2C */
587 
        SCB *HCS_ActScb;        /* 30 */
588 
        TCS *HCS_ActTcs;        /* 34 */
589 
 
590 
        SCB *HCS_FirstAvail;    /* 38 */
591 
        SCB *HCS_LastAvail;     /* 3C */
592 
        SCB *HCS_FirstPend;     /* 40 */
593 
        SCB *HCS_LastPend;      /* 44 */
594 
        SCB *HCS_FirstBusy;     /* 48 */
595 
        SCB *HCS_LastBusy;      /* 4C */
596 
        SCB *HCS_FirstDone;     /* 50 */
597 
        SCB *HCS_LastDone;      /* 54 */
598 
        UBYTE HCS_MaxTags[16];  /* 58 */
599 
        UBYTE HCS_ActTags[16];  /* 68 */
600 
        TCS HCS_Tcs[MAX_TARGETS];       /* 78 */
601 
        ULONG pSRB_head;        /* SRB save queue header     */
602 
        ULONG pSRB_tail;        /* SRB save queue tail       */
603 
#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)
604 
        spinlock_t HCS_AvailLock;
605 
        spinlock_t HCS_SemaphLock;
606 
        spinlock_t pSRB_lock;   /* SRB queue lock            */
607 
#endif
608 
} HCS;
609 
 
610 
/* Bit Definition for HCB_Config */
611 
#define HCC_SCSI_RESET          0x01
612 
#define HCC_EN_PAR              0x02
613 
#define HCC_ACT_TERM1           0x04
614 
#define HCC_ACT_TERM2           0x08
615 
#define HCC_AUTO_TERM           0x10
616 
#define HCC_EN_PWR              0x80
617 
 
618 
/* Bit Definition for HCB_Flags */
619 
#define HCF_EXPECT_DISC         0x01
620 
#define HCF_EXPECT_SELECT       0x02
621 
#define HCF_EXPECT_RESET        0x10
622 
#define HCF_EXPECT_DONE_DISC    0x20
623 
 
624 
/******************************************************************
625 
        Serial EEProm
626 
*******************************************************************/
627 
 
628 
typedef struct _NVRAM_SCSI {    /* SCSI channel configuration   */
629 
        UCHAR NVM_ChSCSIID;     /* 0Ch -> Channel SCSI ID       */
630 
        UCHAR NVM_ChConfig1;    /* 0Dh -> Channel config 1      */
631 
        UCHAR NVM_ChConfig2;    /* 0Eh -> Channel config 2      */
632 
        UCHAR NVM_NumOfTarg;    /* 0Fh -> Number of SCSI target */
633 
        /* SCSI target configuration    */
634 
        UCHAR NVM_Targ0Config;  /* 10h -> Target 0 configuration */
635 
        UCHAR NVM_Targ1Config;  /* 11h -> Target 1 configuration */
636 
        UCHAR NVM_Targ2Config;  /* 12h -> Target 2 configuration */
637 
        UCHAR NVM_Targ3Config;  /* 13h -> Target 3 configuration */
638 
        UCHAR NVM_Targ4Config;  /* 14h -> Target 4 configuration */
639 
        UCHAR NVM_Targ5Config;  /* 15h -> Target 5 configuration */
640 
        UCHAR NVM_Targ6Config;  /* 16h -> Target 6 configuration */
641 
        UCHAR NVM_Targ7Config;  /* 17h -> Target 7 configuration */
642 
        UCHAR NVM_Targ8Config;  /* 18h -> Target 8 configuration */
643 
        UCHAR NVM_Targ9Config;  /* 19h -> Target 9 configuration */
644 
        UCHAR NVM_TargAConfig;  /* 1Ah -> Target A configuration */
645 
        UCHAR NVM_TargBConfig;  /* 1Bh -> Target B configuration */
646 
        UCHAR NVM_TargCConfig;  /* 1Ch -> Target C configuration */
647 
        UCHAR NVM_TargDConfig;  /* 1Dh -> Target D configuration */
648 
        UCHAR NVM_TargEConfig;  /* 1Eh -> Target E configuration */
649 
        UCHAR NVM_TargFConfig;  /* 1Fh -> Target F configuration */
650 
} NVRAM_SCSI;
651 
 
652 
typedef struct _NVRAM {
653 
/*----------header ---------------*/
654 
        USHORT NVM_Signature;   /* 0,1: Signature */
655 
        UCHAR NVM_Size;         /* 2:   Size of data structure */
656 
        UCHAR NVM_Revision;     /* 3:   Revision of data structure */
657 
        /* ----Host Adapter Structure ---- */
658 
        UCHAR NVM_ModelByte0;   /* 4:   Model number (byte 0) */
659 
        UCHAR NVM_ModelByte1;   /* 5:   Model number (byte 1) */
660 
        UCHAR NVM_ModelInfo;    /* 6:   Model information         */
661 
        UCHAR NVM_NumOfCh;      /* 7:   Number of SCSI channel */
662 
        UCHAR NVM_BIOSConfig1;  /* 8:   BIOS configuration 1  */
663 
        UCHAR NVM_BIOSConfig2;  /* 9:   BIOS configuration 2  */
664 
        UCHAR NVM_HAConfig1;    /* A:   Hoat adapter configuration 1 */
665 
        UCHAR NVM_HAConfig2;    /* B:   Hoat adapter configuration 2 */
666 
        NVRAM_SCSI NVM_SCSIInfo[2];
667 
        UCHAR NVM_reserved[10];
668 
        /* ---------- CheckSum ----------       */
669 
        USHORT NVM_CheckSum;    /* 0x3E, 0x3F: Checksum of NVRam        */
670 
} NVRAM, *PNVRAM;
671 
 
672 
/* Bios Configuration for nvram->BIOSConfig1                            */
673 
#define NBC1_ENABLE             0x01    /* BIOS enable                  */
674 
#define NBC1_8DRIVE             0x02    /* Support more than 2 drives   */
675 
#define NBC1_REMOVABLE          0x04    /* Support removable drive      */
676 
#define NBC1_INT19              0x08    /* Intercept int 19h            */
677 
#define NBC1_BIOSSCAN           0x10    /* Dynamic BIOS scan            */
678 
#define NBC1_LUNSUPPORT         0x40    /* Support LUN                  */
679 
 
680 
/* HA Configuration Byte 1                                              */
681 
#define NHC1_BOOTIDMASK 0x0F    /* Boot ID number               */
682 
#define NHC1_LUNMASK    0x70    /* Boot LUN number              */
683 
#define NHC1_CHANMASK   0x80    /* Boot Channel number          */
684 
 
685 
/* Bit definition for nvram->SCSIconfig1                                */
686 
#define NCC1_BUSRESET           0x01    /* Reset SCSI bus at power up   */
687 
#define NCC1_PARITYCHK          0x02    /* SCSI parity enable           */
688 
#define NCC1_ACTTERM1           0x04    /* Enable active terminator 1   */
689 
#define NCC1_ACTTERM2           0x08    /* Enable active terminator 2   */
690 
#define NCC1_AUTOTERM           0x10    /* Enable auto terminator       */
691 
#define NCC1_PWRMGR             0x80    /* Enable power management      */
692 
 
693 
/* Bit definition for SCSI Target configuration byte                    */
694 
#define NTC_DISCONNECT          0x08    /* Enable SCSI disconnect       */
695 
#define NTC_SYNC                0x10    /* SYNC_NEGO                    */
696 
#define NTC_NO_WDTR             0x20    /* SYNC_NEGO                    */
697 
#define NTC_1GIGA               0x40    /* 255 head / 63 sectors (64/32) */
698 
#define NTC_SPINUP              0x80    /* Start disk drive             */
699 
 
700 
/*      Default NVRam values                                            */
701 
#define INI_SIGNATURE           0xC925
702 
#define NBC1_DEFAULT            (NBC1_ENABLE)
703 
#define NCC1_DEFAULT            (NCC1_BUSRESET | NCC1_AUTOTERM | NCC1_PARITYCHK)
704 
#define NTC_DEFAULT             (NTC_NO_WDTR | NTC_1GIGA | NTC_DISCONNECT)
705 
 
706 
/* SCSI related definition                                              */
707 
#define DISC_NOT_ALLOW          0x80    /* Disconnect is not allowed    */
708 
#define DISC_ALLOW              0xC0    /* Disconnect is allowed        */
709 
#define SCSICMD_RequestSense    0x03
710 
 
711 
 
712 
/*----------------------------------------------------------------------*/
713 
/*                              PCI                                     */
714 
/*----------------------------------------------------------------------*/
715 
#define PCI_FUNCTION_ID         0xB1
716 
#define PCI_BIOS_PRESENT        0x01
717 
#define FIND_PCI_DEVICE         0x02
718 
#define FIND_PCI_CLASS_CODE     0x03
719 
#define GENERATE_SPECIAL_CYCLE  0x06
720 
#define READ_CONFIG_BYTE        0x08
721 
#define READ_CONFIG_WORD        0x09
722 
#define READ_CONFIG_DWORD       0x0A
723 
#define WRITE_CONFIG_BYTE       0x0B
724 
#define WRITE_CONFIG_WORD       0x0C
725 
#define WRITE_CONFIG_DWORD      0x0D
726 
 
727 
#define SUCCESSFUL              0x00
728 
#define FUNC_NOT_SUPPORTED      0x81
729 
#define BAD_VENDOR_ID           0x83    /* Bad vendor ID                */
730 
#define DEVICE_NOT_FOUND        0x86    /* PCI device not found         */
731 
#define BAD_REGISTER_NUMBER     0x87
732 
 
733 
#define MAX_PCI_DEVICES         21      /* Maximum devices supportted   */
734 
 
735 
#define MAX_PCI_CHANL           4
736 
 
737 
typedef struct _BIOS32_ENTRY_STRUCTURE {
738 
        DWORD Signatures;       /* Should be "_32_"             */
739 
        DWORD BIOS32Entry;      /* 32-bit physical address      */
740 
        BYTE Revision;          /* Revision level, should be 0  */
741 
        BYTE Length;            /* Multiply of 16, should be 1  */
742 
        BYTE CheckSum;          /* Checksum of whole structure  */
743 
        BYTE Reserved[5];       /* Reserved                     */
744 
} BIOS32_ENTRY_STRUCTURE, *PBIOS32_ENTRY_STRUCTURE;
745 
 
746 
typedef struct {
747 
        union {
748 
                unsigned int eax;
749 
                struct {
750 
                        unsigned short ax;
751 
                } word;
752 
                struct {
753 
                        unsigned char al;
754 
                        unsigned char ah;
755 
                } byte;
756 
        } eax;
757 
        union {
758 
                unsigned int ebx;
759 
                struct {
760 
                        unsigned short bx;
761 
                } word;
762 
                struct {
763 
                        unsigned char bl;
764 
                        unsigned char bh;
765 
                } byte;
766 
        } ebx;
767 
        union {
768 
                unsigned int ecx;
769 
                struct {
770 
                        unsigned short cx;
771 
                } word;
772 
                struct {
773 
                        unsigned char cl;
774 
                        unsigned char ch;
775 
                } byte;
776 
        } ecx;
777 
        union {
778 
                unsigned int edx;
779 
                struct {
780 
                        unsigned short dx;
781 
                } word;
782 
                struct {
783 
                        unsigned char dl;
784 
                        unsigned char dh;
785 
                } byte;
786 
        } edx;
787 
        union {
788 
                unsigned int edi;
789 
                struct {
790 
                        unsigned short di;
791 
                } word;
792 
        } edi;
793 
        union {
794 
                unsigned int esi;
795 
                struct {
796 
                        unsigned short si;
797 
                } word;
798 
        } esi;
799 
} REGS;
800 
 
801 
typedef union {                 /* Union define for mechanism 1 */
802 
        struct {
803 
                unsigned char RegNum;
804 
                unsigned char FcnNum:3;
805 
                unsigned char DeviceNum:5;
806 
                unsigned char BusNum;
807 
                unsigned char Reserved:7;
808 
                unsigned char Enable:1;
809 
        } sConfigAdr;
810 
        unsigned long lConfigAdr;
811 
} CONFIG_ADR;
812 
 
813 
typedef union {                 /* Union define for mechanism 2 */
814 
        struct {
815 
                unsigned char RegNum;
816 
                unsigned char DeviceNum;
817 
                unsigned short Reserved;
818 
        } sHostAdr;
819 
        unsigned long lHostAdr;
820 
} HOST_ADR;
821 
 
822 
typedef struct _HCSinfo {
823 
        ULONG base;
824 
        UCHAR vec;
825 
        UCHAR bios;             /* High byte of BIOS address */
826 
        USHORT BaseAndBios;     /* high byte: pHcsInfo->bios,low byte:pHcsInfo->base */
827 
} HCSINFO;
828 
 
829 
#define TUL_RD(x,y)             (UCHAR)(inb(  (int)((ULONG)(x+y)) ))
830 
#define TUL_RDLONG(x,y)         (ULONG)(inl((int)((ULONG)(x+y)) ))
831 
#define TUL_WR(     adr,data)   outb( (UCHAR)(data), (int)(adr))
832 
#define TUL_WRSHORT(adr,data)   outw( (UWORD)(data), (int)(adr))
833 
#define TUL_WRLONG( adr,data)   outl( (ULONG)(data), (int)(adr))
834 
 
835 
#define SCSI_ABORT_SNOOZE 0
836 
#define SCSI_ABORT_SUCCESS 1
837 
#define SCSI_ABORT_PENDING 2
838 
#define SCSI_ABORT_BUSY 3
839 
#define SCSI_ABORT_NOT_RUNNING 4
840 
#define SCSI_ABORT_ERROR 5
841 
 
842 
#define SCSI_RESET_SNOOZE 0
843 
#define SCSI_RESET_PUNT 1
844 
#define SCSI_RESET_SUCCESS 2
845 
#define SCSI_RESET_PENDING 3
846 
#define SCSI_RESET_WAKEUP 4
847 
#define SCSI_RESET_NOT_RUNNING 5
848 
#define SCSI_RESET_ERROR 6
849 
 
850 
#define SCSI_RESET_SYNCHRONOUS          0x01
851 
#define SCSI_RESET_ASYNCHRONOUS         0x02
852 
#define SCSI_RESET_SUGGEST_BUS_RESET    0x04
853 
#define SCSI_RESET_SUGGEST_HOST_RESET   0x08
854 
 
855 
#define SCSI_RESET_BUS_RESET 0x100
856 
#define SCSI_RESET_HOST_RESET 0x200
857 
#define SCSI_RESET_ACTION   0xff

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.