Subversion Repositories or1k

/*

 * Trantor T128/T128F/T228 defines

 *      Note : architecturally, the T100 and T128 are different and won't work

 *

 * Copyright 1993, Drew Eckhardt

 *      Visionary Computing

 *      (Unix and Linux consulting and custom programming)

 *      drew@colorado.edu

 *      +1 (303) 440-4894

 *

 * DISTRIBUTION RELEASE 3.

 *

 * For more information, please consult

 *

 * Trantor Systems, Ltd.

 * T128/T128F/T228 SCSI Host Adapter

 * Hardware Specifications

 *

 * Trantor Systems, Ltd.

 * 5415 Randall Place

 * Fremont, CA 94538

 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910

 *

 * and

 *

 * NCR 5380 Family

 * SCSI Protocol Controller

 * Databook

 *

 * NCR Microelectronics

 * 1635 Aeroplaza Drive

 * Colorado Springs, CO 80916

 * 1+ (719) 578-3400

 * 1+ (800) 334-5454

 */

/*

 * $Log: not supported by cvs2svn $

 * Revision 1.1.1.1  2001/09/10 07:44:35  simons

 * Initial import

 *

 * Revision 1.1.1.1  2001/07/02 17:58:27  simons

 * Initial revision

 *

 */

#ifndef T128_H

#define T128_H

#define T128_PUBLIC_RELEASE 3

#define TDEBUG_INIT     0x1

#define TDEBUG_TRANSFER 0x2

/*

 * The trantor boards are memory mapped. They use an NCR5380 or

 * equivalent (my sample board had part second sourced from ZILOG).

 * NCR's recommended "Pseudo-DMA" architecture is used, where

 * a PAL drives the DMA signals on the 5380 allowing fast, blind

 * transfers with proper handshaking.

 */

/*

 * Note : a boot switch is provided for the purpose of informing the

 * firmware to boot or not boot from attached SCSI devices.  So, I imagine

 * there are fewer people who've yanked the ROM like they do on the Seagate

 * to make bootup faster, and I'll probably use this for autodetection.

 */

#define T_ROM_OFFSET            0

/*

 * Note : my sample board *WAS NOT* populated with the SRAM, so this

 * can't be used for autodetection without a ROM present.

 */

#define T_RAM_OFFSET            0x1800

/*

 * All of the registers are allocated 32 bytes of address space, except

 * for the data register (read/write to/from the 5380 in pseudo-DMA mode)

 */

#define T_CONTROL_REG_OFFSET    0x1c00  /* rw */

#define T_CR_INT                0x10    /* Enable interrupts */

#define T_CR_CT                 0x02    /* Reset watchdog timer */

#define T_STATUS_REG_OFFSET     0x1c20  /* ro */

#define T_ST_BOOT               0x80    /* Boot switch */

#define T_ST_S3                 0x40    /* User settable switches, */

#define T_ST_S2                 0x20    /* read 0 when switch is on, 1 off */

#define T_ST_S1                 0x10

#define T_ST_PS2                0x08    /* Set for Microchannel 228 */

#define T_ST_RDY                0x04    /* 5380 DRQ */

#define T_ST_TIM                0x02    /* indicates 40us watchdog timer fired */

#define T_ST_ZERO               0x01    /* Always zero */

#define T_5380_OFFSET           0x1d00  /* 8 registers here, see NCR5380.h */

#define T_DATA_REG_OFFSET       0x1e00  /* rw 512 bytes long */

#ifndef ASM

int t128_abort(Scsi_Cmnd *);

int t128_biosparam(Disk *, kdev_t, int*);

int t128_detect(Scsi_Host_Template *);

int t128_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));

int t128_reset(Scsi_Cmnd *, unsigned int reset_flags);

int t128_proc_info (char *buffer, char **start, off_t offset,

                   int length, int hostno, int inout);

#ifndef NULL

#define NULL 0

#endif

#ifndef CMD_PER_LUN

#define CMD_PER_LUN 2

#endif

#ifndef CAN_QUEUE

#define CAN_QUEUE 32 

#endif

/*

 * I hadn't thought of this with the earlier drivers - but to prevent

 * macro definition conflicts, we shouldn't define all of the internal

 * macros when this is being used solely for the host stub.

 */

#if defined(HOSTS_C) || defined(MODULE)

#define TRANTOR_T128 {NULL, NULL, NULL, NULL, \

        "Trantor T128/T128F/T228", t128_detect, NULL,  \

        NULL,                                                   \

        NULL, t128_queue_command, t128_abort, t128_reset, NULL,         \

        t128_biosparam,                                                 \

        /* can queue */ CAN_QUEUE, /* id */ 7, SG_ALL,                  \

        /* cmd per lun */ CMD_PER_LUN , 0, 0, DISABLE_CLUSTERING}

#endif

#ifndef HOSTS_C

#define NCR5380_implementation_fields \

    volatile unsigned char *base

#define NCR5380_local_declare() \

    volatile unsigned char *base

#define NCR5380_setup(instance) \

    base = (volatile unsigned char *) (instance)->base

#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))

#if !(TDEBUG & TDEBUG_TRANSFER) 

#define NCR5380_read(reg) (*(T128_address(reg)))

#define NCR5380_write(reg, value) (*(T128_address(reg)) = (value))

#else

#define NCR5380_read(reg)                                               \

    (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\

    , instance->hostno, (reg), T128_address(reg))), *(T128_address(reg)))

#define NCR5380_write(reg, value) {                                     \

    printk("scsi%d : write %02x to register %d at address %08x\n",      \

            instance->hostno, (value), (reg), T128_address(reg));       \

    *(T128_address(reg)) = (value);                                     \

}

#endif

#define NCR5380_intr t128_intr

#define NCR5380_queue_command t128_queue_command

#define NCR5380_abort t128_abort

#define NCR5380_reset t128_reset

#define NCR5380_proc_info t128_proc_info

/* 15 14 12 10 7 5 3

   1101 0100 1010 1000 */

#define T128_IRQS 0xc4a8 

#endif /* else def HOSTS_C */

#endif /* ndef ASM */

#endif /* T128_H */