Subversion Repositories or1k

/*

 *    wd33c93.h -  Linux device driver definitions for the

 *                 Commodore Amiga A2091/590 SCSI controller card

 *

 *    IMPORTANT: This file is for version 1.21 - 20/Mar/1996

 *

 * Copyright (c) 1996 John Shifflett, GeoLog Consulting

 *    john@geolog.com

 *    jshiffle@netcom.com

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2, or (at your option)

 * any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 */

#ifndef WD33C93_H

#define WD33C93_H

#define uchar unsigned char

/* wd register names */

#define WD_OWN_ID    0x00

#define WD_CONTROL      0x01

#define WD_TIMEOUT_PERIOD  0x02

#define WD_CDB_1     0x03

#define WD_CDB_2     0x04

#define WD_CDB_3     0x05

#define WD_CDB_4     0x06

#define WD_CDB_5     0x07

#define WD_CDB_6     0x08

#define WD_CDB_7     0x09

#define WD_CDB_8     0x0a

#define WD_CDB_9     0x0b

#define WD_CDB_10    0x0c

#define WD_CDB_11    0x0d

#define WD_CDB_12    0x0e

#define WD_TARGET_LUN      0x0f

#define WD_COMMAND_PHASE   0x10

#define WD_SYNCHRONOUS_TRANSFER 0x11

#define WD_TRANSFER_COUNT_MSB 0x12

#define WD_TRANSFER_COUNT  0x13

#define WD_TRANSFER_COUNT_LSB 0x14

#define WD_DESTINATION_ID  0x15

#define WD_SOURCE_ID    0x16

#define WD_SCSI_STATUS     0x17

#define WD_COMMAND      0x18

#define WD_DATA      0x19

#define WD_QUEUE_TAG    0x1a

#define WD_AUXILIARY_STATUS   0x1f

/* WD commands */

#define WD_CMD_RESET    0x00

#define WD_CMD_ABORT    0x01

#define WD_CMD_ASSERT_ATN  0x02

#define WD_CMD_NEGATE_ACK  0x03

#define WD_CMD_DISCONNECT  0x04

#define WD_CMD_RESELECT    0x05

#define WD_CMD_SEL_ATN     0x06

#define WD_CMD_SEL      0x07

#define WD_CMD_SEL_ATN_XFER   0x08

#define WD_CMD_SEL_XFER    0x09

#define WD_CMD_RESEL_RECEIVE  0x0a

#define WD_CMD_RESEL_SEND  0x0b

#define WD_CMD_WAIT_SEL_RECEIVE 0x0c

#define WD_CMD_TRANS_ADDR  0x18

#define WD_CMD_TRANS_INFO  0x20

#define WD_CMD_TRANSFER_PAD   0x21

#define WD_CMD_SBT_MODE    0x80

/* ASR register */

#define ASR_INT         (0x80)

#define ASR_LCI         (0x40)

#define ASR_BSY         (0x20)

#define ASR_CIP         (0x10)

#define ASR_PE          (0x02)

#define ASR_DBR         (0x01)

/* SCSI Bus Phases */

#define PHS_DATA_OUT    0x00

#define PHS_DATA_IN     0x01

#define PHS_COMMAND     0x02

#define PHS_STATUS      0x03

#define PHS_MESS_OUT    0x06

#define PHS_MESS_IN     0x07

/* Command Status Register definitions */

  /* reset state interrupts */

#define CSR_RESET    0x00

#define CSR_RESET_AF    0x01

  /* successful completion interrupts */

#define CSR_RESELECT    0x10

#define CSR_SELECT      0x11

#define CSR_SEL_XFER_DONE  0x16

#define CSR_XFER_DONE      0x18

  /* paused or aborted interrupts */

#define CSR_MSGIN    0x20

#define CSR_SDP         0x21

#define CSR_SEL_ABORT      0x22

#define CSR_RESEL_ABORT    0x25

#define CSR_RESEL_ABORT_AM 0x27

#define CSR_ABORT    0x28

  /* terminated interrupts */

#define CSR_INVALID     0x40

#define CSR_UNEXP_DISC     0x41

#define CSR_TIMEOUT     0x42

#define CSR_PARITY      0x43

#define CSR_PARITY_ATN     0x44

#define CSR_BAD_STATUS     0x45

#define CSR_UNEXP    0x48

  /* service required interrupts */

#define CSR_RESEL    0x80

#define CSR_RESEL_AM    0x81

#define CSR_DISC     0x85

#define CSR_SRV_REQ     0x88

   /* Own ID/CDB Size register */

#define OWNID_EAF    0x08

#define OWNID_EHP    0x10

#define OWNID_RAF    0x20

#define OWNID_FS_8   0x00

#define OWNID_FS_12  0x40

#define OWNID_FS_16  0x80

   /* define these so we don't have to change a2091.c, etc. */

#define WD33C93_FS_8_10  OWNID_FS_8

#define WD33C93_FS_12_15 OWNID_FS_12

#define WD33C93_FS_16_20 OWNID_FS_16

   /* Control register */

#define CTRL_HSP     0x01

#define CTRL_HA      0x02

#define CTRL_IDI     0x04

#define CTRL_EDI     0x08

#define CTRL_HHP     0x10

#define CTRL_POLLED  0x00

#define CTRL_BURST   0x20

#define CTRL_BUS     0x40

#define CTRL_DMA     0x80

   /* Timeout Period register */

#define TIMEOUT_PERIOD_VALUE  20    /* 20 = 200 ms */

   /* Synchronous Transfer Register */

#define STR_FSS      0x80

   /* Destination ID register */

#define DSTID_DPD    0x40

#define DATA_OUT_DIR 0

#define DATA_IN_DIR  1

#define DSTID_SCC    0x80

   /* Source ID register */

#define SRCID_MASK   0x07

#define SRCID_SIV    0x08

#define SRCID_DSP    0x20

#define SRCID_ES     0x40

#define SRCID_ER     0x80

   /* This is what the 3393 chip looks like to us */

typedef struct {

   volatile unsigned char   SASR;

   char                     pad;

   volatile unsigned char   SCMD;

} wd33c93_regs;

typedef int (*dma_setup_t) (Scsi_Cmnd *SCpnt, int dir_in);

typedef void (*dma_stop_t) (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,

             int status);

#define DEFAULT_SX_PER   500     /* (ns) fairly safe */

#define DEFAULT_SX_OFF   0       /* aka async */

#define OPTIMUM_SX_PER   252     /* (ns) best we can do (mult-of-4) */

#define OPTIMUM_SX_OFF   12      /* size of wd3393 fifo */

struct sx_period {

   unsigned int   period_ns;

   uchar          reg_value;

   };

/* FEF: defines for hostdata->dma_buffer_pool */

#define BUF_CHIP_ALLOCED 0

#define BUF_SCSI_ALLOCED 1

struct WD33C93_hostdata {

    struct Scsi_Host *next;

    wd33c93_regs     *regp;

    uchar            clock_freq;

    uchar            chip;             /* what kind of wd33c93? */

    uchar            microcode;        /* microcode rev */

    int              dma_dir;          /* data transfer dir. */

    dma_setup_t      dma_setup;

    dma_stop_t       dma_stop;

    uchar            *dma_bounce_buffer;

    unsigned int     dma_bounce_len;

    uchar            dma_buffer_pool;  /* FEF: buffer from chip_ram? */

    volatile uchar   busy[8];          /* index = target, bit = lun */

    volatile Scsi_Cmnd *input_Q;       /* commands waiting to be started */

    volatile Scsi_Cmnd *selecting;     /* trying to select this command */

    volatile Scsi_Cmnd *connected;     /* currently connected command */

    volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */

    uchar            state;            /* what we are currently doing */

    uchar            dma;              /* current state of DMA (on/off) */

    uchar            level2;           /* extent to which Level-2 commands are used */

    uchar            disconnect;       /* disconnect/reselect policy */

    unsigned int     args;             /* set from command-line argument */

    uchar            incoming_msg[8];  /* filled during message_in phase */

    int              incoming_ptr;     /* mainly used with EXTENDED messages */

    uchar            outgoing_msg[8];  /* send this during next message_out */

    int              outgoing_len;     /* length of outgoing message */

    unsigned int     default_sx_per;   /* default transfer period for SCSI bus */

    uchar            sync_xfer[8];     /* sync_xfer reg settings per target */

    uchar            sync_stat[8];     /* status of sync negotiation per target */

    uchar            no_sync;          /* bitmask: don't do sync on these targets */

#if 0

    uchar            proc;             /* bitmask: what's in proc output */

#endif

    };

/* defines for hostdata->chip */

#define C_WD33C93       0

#define C_WD33C93A      1

#define C_WD33C93B      2

#define C_UNKNOWN_CHIP  100

/* defines for hostdata->state */

#define S_UNCONNECTED         0

#define S_SELECTING           1

#define S_RUNNING_LEVEL2      2

#define S_CONNECTED           3

#define S_PRE_TMP_DISC        4

#define S_PRE_CMP_DISC        5

/* defines for hostdata->dma */

#define D_DMA_OFF          0

#define D_DMA_RUNNING      1

/* defines for hostdata->level2 */

/* NOTE: only the first 3 are implemented so far */

#define L2_NONE      1  /* no combination commands - we get lots of ints */

#define L2_SELECT    2  /* start with SEL_ATN_XFER, but never resume it */

#define L2_BASIC     3  /* resume after STATUS ints & RDP messages */

#define L2_DATA      4  /* resume after DATA_IN/OUT ints */

#define L2_MOST      5  /* resume after anything except a RESELECT int */

#define L2_RESELECT  6  /* resume after everything, including RESELECT ints */

#define L2_ALL       7  /* always resume */

/* defines for hostdata->disconnect */

#define DIS_NEVER    0

#define DIS_ADAPTIVE 1

#define DIS_ALWAYS   2

/* defines for hostdata->args */

#define DB_TEST1              1<<0

#define DB_TEST2              1<<1

#define DB_QUEUE_COMMAND      1<<2

#define DB_EXECUTE            1<<3

#define DB_INTR               1<<4

#define DB_TRANSFER           1<<5

#define DB_MASK               0x3f

/* defines for hostdata->sync_stat[] */

#define SS_UNSET     0

#define SS_FIRST     1

#define SS_WAITING   2

#define SS_SET       3

/* defines for hostdata->proc */

#define PR_VERSION   1<<0

#define PR_INFO      1<<1

#define PR_TOTALS    1<<2

#define PR_CONNECTED 1<<3

#define PR_INPUTQ    1<<4

#define PR_DISCQ     1<<5

#define PR_TEST      1<<6

#define PR_STOP      1<<7

void wd33c93_init (struct Scsi_Host *instance, wd33c93_regs *regs,

         dma_setup_t setup, dma_stop_t stop, int clock_freq);

int wd33c93_abort (Scsi_Cmnd *cmd);

int wd33c93_queuecommand (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *));

void wd33c93_intr (struct Scsi_Host *instance);

int wd33c93_proc_info(char *, char **, off_t, int, int, int);

#if LINUX_VERSION_CODE >= 0x010300

int wd33c93_reset (Scsi_Cmnd *, unsigned int);

#else

int wd33c93_reset (Scsi_Cmnd *);

#endif

#if 0

struct proc_dir_entry proc_scsi_wd33c93;

#endif

#endif /* WD33C93_H */