URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [sound/] [Config.in] - Blame information for rev 1765

Details | Compare with Previous | View Log


bool 'ProAudioSpectrum 16 support' CONFIG_PAS
bool 'Sound Blaster (SB, SBPro, SB16, clones) support' CONFIG_SB
bool 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_ADLIB
bool 'Gravis Ultrasound support' CONFIG_GUS
bool 'MPU-401 support (NOT for SB16)' CONFIG_MPU401
bool '6850 UART Midi support' CONFIG_UART6850
bool 'PSS (ECHO-ADI2111) support' CONFIG_PSS
bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16
bool 'GUS MAX support' CONFIG_GUSMAX
bool 'Microsoft Sound System support' CONFIG_MSS
bool 'Ensoniq SoundScape support' CONFIG_SSCAPE
bool 'MediaTrix AudioTrix Pro support' CONFIG_TRIX
bool 'Support for MAD16 and/or Mozart based cards' CONFIG_MAD16
bool 'Support for Crystal CS4232 based (PnP) cards' CONFIG_CS4232
bool 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_MAUI
bool '/dev/dsp and /dev/audio support' CONFIG_AUDIO
bool 'MIDI interface support' CONFIG_MIDI
bool 'FM synthesizer (YM3812/OPL-3) support' CONFIG_YM3812
 
if [ "$CONFIG_SB" = "y" ]; then
hex 'I/O base for SB Check from manual of the card' SBC_BASE 220
fi
 
if [ "$CONFIG_SB" = "y" ]; then
int 'Sound Blaster IRQ Check from manual of the card' SBC_IRQ 7
fi
 
if [ "$CONFIG_SB" = "y" ]; then
int 'Sound Blaster DMA 0, 1 or 3' SBC_DMA 1
fi
 
if [ "$CONFIG_SB" = "y" ]; then
int 'Sound Blaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)' SB_DMA2 5
fi
 
if [ "$CONFIG_SB" = "y" ]; then
hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' SB_MPU_BASE 0
fi
 
if [ "$CONFIG_SB" = "y" ]; then
int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Use -1 with SB16' SB_MPU_IRQ -1
fi
 
if [ "$CONFIG_PAS" = "y" ]; then
int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' PAS_IRQ 10
fi
 
if [ "$CONFIG_PAS" = "y" ]; then
int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' PAS_DMA 3
fi
 
if [ "$CONFIG_GUS" = "y" ]; then
hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' GUS_BASE 220
fi
 
if [ "$CONFIG_GUS" = "y" ]; then
int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' GUS_IRQ 15
fi
 
if [ "$CONFIG_GUS" = "y" ]; then
int 'GUS DMA 1, 3, 5, 6 or 7' GUS_DMA 6
fi
 
if [ "$CONFIG_GUS" = "y" ]; then
int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' GUS_DMA2 -1
fi
 
if [ "$CONFIG_GUS16" = "y" ]; then
hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' GUS16_BASE 530
fi
 
if [ "$CONFIG_GUS16" = "y" ]; then
int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' GUS16_IRQ 7
fi
 
if [ "$CONFIG_GUS16" = "y" ]; then
int 'GUS DMA 0, 1 or 3' GUS16_DMA 3
fi
 
if [ "$CONFIG_MPU401" = "y" ]; then
hex 'I/O base for MPU401 Check from manual of the card' MPU_BASE 330
fi
 
if [ "$CONFIG_MPU401" = "y" ]; then
int 'MPU401 IRQ Check from manual of the card' MPU_IRQ 9
fi
 
if [ "$CONFIG_MAUI" = "y" ]; then
hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' MAUI_BASE 330
fi
 
if [ "$CONFIG_MAUI" = "y" ]; then
int 'Maui IRQ 5, 9, 12 or 15' MAUI_IRQ 9
fi
 
if [ "$CONFIG_UART6850" = "y" ]; then
hex 'I/O base for UART 6850 MIDI port (Unknown)' U6850_BASE 0
fi
 
if [ "$CONFIG_UART6850" = "y" ]; then
int 'UART6850 IRQ (Unknown)' U6850_IRQ -1
fi
 
if [ "$CONFIG_PSS" = "y" ]; then
hex 'PSS I/O base 220 or 240' PSS_BASE 220
fi
 
if [ "$CONFIG_PSS" = "y" ]; then
hex 'PSS audio I/O base 530, 604, E80 or F40' PSS_MSS_BASE 530
fi
 
if [ "$CONFIG_PSS" = "y" ]; then
int 'PSS audio IRQ 7, 9, 10 or 11' PSS_MSS_IRQ 11
fi
 
if [ "$CONFIG_PSS" = "y" ]; then
int 'PSS audio DMA 0, 1 or 3' PSS_MSS_DMA 3
fi
 
if [ "$CONFIG_PSS" = "y" ]; then
hex 'PSS MIDI I/O base ' PSS_MPU_BASE 330
fi
 
if [ "$CONFIG_PSS" = "y" ]; then
int 'PSS MIDI IRQ 3, 4, 5, 7 or 9' PSS_MPU_IRQ 9
fi
 
if [ "$CONFIG_MSS" = "y" ]; then
hex 'MSS/WSS I/O base 530, 604, E80 or F40' MSS_BASE 530
fi
 
if [ "$CONFIG_MSS" = "y" ]; then
int 'MSS/WSS IRQ 7, 9, 10 or 11' MSS_IRQ 11
fi
 
if [ "$CONFIG_MSS" = "y" ]; then
int 'MSS/WSS DMA 0, 1 or 3' MSS_DMA 3
fi
 
if [ "$CONFIG_SSCAPE" = "y" ]; then
hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' SSCAPE_BASE 330
fi
 
if [ "$CONFIG_SSCAPE" = "y" ]; then
int 'SoundScape MIDI IRQ ' SSCAPE_IRQ 9
fi
 
if [ "$CONFIG_SSCAPE" = "y" ]; then
int 'SoundScape initialization DMA 0, 1 or 3' SSCAPE_DMA 3
fi
 
if [ "$CONFIG_SSCAPE" = "y" ]; then
hex 'SoundScape audio I/O base 534, 608, E84 or F44' SSCAPE_MSS_BASE 534
fi
 
if [ "$CONFIG_SSCAPE" = "y" ]; then
int 'SoundScape audio IRQ 7, 9, 10 or 11' SSCAPE_MSS_IRQ 11
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
hex 'AudioTrix audio I/O base 530, 604, E80 or F40' TRIX_BASE 530
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
int 'AudioTrix audio IRQ 7, 9, 10 or 11' TRIX_IRQ 11
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
int 'AudioTrix audio DMA 0, 1 or 3' TRIX_DMA 0
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
int 'AudioTrix second (duplex) DMA 0, 1 or 3' TRIX_DMA2 3
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
hex 'AudioTrix MIDI I/O base 330, 370, 3B0 or 3F0' TRIX_MPU_BASE 330
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
int 'AudioTrix MIDI IRQ 3, 4, 5, 7 or 9' TRIX_MPU_IRQ 9
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
hex 'AudioTrix SB I/O base 220, 210, 230, 240, 250, 260 or 270' TRIX_SB_BASE 220
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
int 'AudioTrix SB IRQ 3, 4, 5 or 7' TRIX_SB_IRQ 7
fi
 
if [ "$CONFIG_TRIX" = "y" ]; then
int 'AudioTrix SB DMA 1 or 3' TRIX_SB_DMA 1
fi
 
if [ "$CONFIG_CS4232" = "y" ]; then
hex 'CS4232 audio I/O base 530, 604, E80 or F40' CS4232_BASE 530
fi
 
if [ "$CONFIG_CS4232" = "y" ]; then
int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CS4232_IRQ 11
fi
 
if [ "$CONFIG_CS4232" = "y" ]; then
int 'CS4232 audio DMA 0, 1 or 3' CS4232_DMA 0
fi
 
if [ "$CONFIG_CS4232" = "y" ]; then
int 'CS4232 second (duplex) DMA 0, 1 or 3' CS4232_DMA2 3
fi
 
if [ "$CONFIG_CS4232" = "y" ]; then
hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CS4232_MPU_BASE 330
fi
 
if [ "$CONFIG_CS4232" = "y" ]; then
int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CS4232_MPU_IRQ 9
fi
 
if [ "$CONFIG_MAD16" = "y" ]; then
hex 'MAD16 audio I/O base 530, 604, E80 or F40' MAD16_BASE 530
fi
 
if [ "$CONFIG_MAD16" = "y" ]; then
int 'MAD16 audio IRQ 7, 9, 10 or 11' MAD16_IRQ 11
fi
 
if [ "$CONFIG_MAD16" = "y" ]; then
int 'MAD16 audio DMA 0, 1 or 3' MAD16_DMA 3
fi
 
if [ "$CONFIG_MAD16" = "y" ]; then
int 'MAD16 second (duplex) DMA 0, 1 or 3' MAD16_DMA2 0
fi
 
if [ "$CONFIG_MAD16" = "y" ]; then
hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' MAD16_MPU_BASE 330
fi
 
if [ "$CONFIG_MAD16" = "y" ]; then
int 'MAD16 MIDI IRQ 5, 7, 9 or 10' MAD16_MPU_IRQ 9
fi
 
if [ "$CONFIG_AUDIO" = "y" ]; then
int 'Audio DMA buffer size 4096, 16384, 32768 or 65536' DSP_BUFFSIZE 65536
fi
#
$MAKE -C drivers/sound kernelconfig || exit 1
bool 'Additional low level drivers' CONFIG_LOWLEVEL_SOUND
 
if [ "$CONFIG_LOWLEVEL_SOUND" = "y" ]; then
   bool 'ACI mixer (miroPCM12)' CONFIG_ACI_MIXER
fi

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [sound/] [Config.in] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1626	jcastillo	`bool 'ProAudioSpectrum 16 support' CONFIG_PAS`
2			`bool 'Sound Blaster (SB, SBPro, SB16, clones) support' CONFIG_SB`
3			`bool 'Generic OPL2/OPL3 FM synthesizer support' CONFIG_ADLIB`
4			`bool 'Gravis Ultrasound support' CONFIG_GUS`
5			`bool 'MPU-401 support (NOT for SB16)' CONFIG_MPU401`
6			`bool '6850 UART Midi support' CONFIG_UART6850`
7			`bool 'PSS (ECHO-ADI2111) support' CONFIG_PSS`
8			`bool '16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16`
9			`bool 'GUS MAX support' CONFIG_GUSMAX`
10			`bool 'Microsoft Sound System support' CONFIG_MSS`
11			`bool 'Ensoniq SoundScape support' CONFIG_SSCAPE`
12			`bool 'MediaTrix AudioTrix Pro support' CONFIG_TRIX`
13			`bool 'Support for MAD16 and/or Mozart based cards' CONFIG_MAD16`
14			`bool 'Support for Crystal CS4232 based (PnP) cards' CONFIG_CS4232`
15			`bool 'Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_MAUI`
16			`bool '/dev/dsp and /dev/audio support' CONFIG_AUDIO`
17			`bool 'MIDI interface support' CONFIG_MIDI`
18			`bool 'FM synthesizer (YM3812/OPL-3) support' CONFIG_YM3812`
19
20			`if [ "$CONFIG_SB" = "y" ]; then`
21			`hex 'I/O base for SB Check from manual of the card' SBC_BASE 220`
22			`fi`
23
24			`if [ "$CONFIG_SB" = "y" ]; then`
25			`int 'Sound Blaster IRQ Check from manual of the card' SBC_IRQ 7`
26			`fi`
27
28			`if [ "$CONFIG_SB" = "y" ]; then`
29			`int 'Sound Blaster DMA 0, 1 or 3' SBC_DMA 1`
30			`fi`
31
32			`if [ "$CONFIG_SB" = "y" ]; then`
33			`int 'Sound Blaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)' SB_DMA2 5`
34			`fi`
35
36			`if [ "$CONFIG_SB" = "y" ]; then`
37			`hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' SB_MPU_BASE 0`
38			`fi`
39
40			`if [ "$CONFIG_SB" = "y" ]; then`
41			`int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Use -1 with SB16' SB_MPU_IRQ -1`
42			`fi`
43
44			`if [ "$CONFIG_PAS" = "y" ]; then`
45			`int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' PAS_IRQ 10`
46			`fi`
47
48			`if [ "$CONFIG_PAS" = "y" ]; then`
49			`int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' PAS_DMA 3`
50			`fi`
51
52			`if [ "$CONFIG_GUS" = "y" ]; then`
53			`hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' GUS_BASE 220`
54			`fi`
55
56			`if [ "$CONFIG_GUS" = "y" ]; then`
57			`int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' GUS_IRQ 15`
58			`fi`
59
60			`if [ "$CONFIG_GUS" = "y" ]; then`
61			`int 'GUS DMA 1, 3, 5, 6 or 7' GUS_DMA 6`
62			`fi`
63
64			`if [ "$CONFIG_GUS" = "y" ]; then`
65			`int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' GUS_DMA2 -1`
66			`fi`
67
68			`if [ "$CONFIG_GUS16" = "y" ]; then`
69			`hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' GUS16_BASE 530`
70			`fi`
71
72			`if [ "$CONFIG_GUS16" = "y" ]; then`
73			`int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' GUS16_IRQ 7`
74			`fi`
75
76			`if [ "$CONFIG_GUS16" = "y" ]; then`
77			`int 'GUS DMA 0, 1 or 3' GUS16_DMA 3`
78			`fi`
79
80			`if [ "$CONFIG_MPU401" = "y" ]; then`
81			`hex 'I/O base for MPU401 Check from manual of the card' MPU_BASE 330`
82			`fi`
83
84			`if [ "$CONFIG_MPU401" = "y" ]; then`
85			`int 'MPU401 IRQ Check from manual of the card' MPU_IRQ 9`
86			`fi`
87
88			`if [ "$CONFIG_MAUI" = "y" ]; then`
89			`hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' MAUI_BASE 330`
90			`fi`
91
92			`if [ "$CONFIG_MAUI" = "y" ]; then`
93			`int 'Maui IRQ 5, 9, 12 or 15' MAUI_IRQ 9`
94			`fi`
95
96			`if [ "$CONFIG_UART6850" = "y" ]; then`
97			`hex 'I/O base for UART 6850 MIDI port (Unknown)' U6850_BASE 0`
98			`fi`
99
100			`if [ "$CONFIG_UART6850" = "y" ]; then`
101			`int 'UART6850 IRQ (Unknown)' U6850_IRQ -1`
102			`fi`
103
104			`if [ "$CONFIG_PSS" = "y" ]; then`
105			`hex 'PSS I/O base 220 or 240' PSS_BASE 220`
106			`fi`
107
108			`if [ "$CONFIG_PSS" = "y" ]; then`
109			`hex 'PSS audio I/O base 530, 604, E80 or F40' PSS_MSS_BASE 530`
110			`fi`
111
112			`if [ "$CONFIG_PSS" = "y" ]; then`
113			`int 'PSS audio IRQ 7, 9, 10 or 11' PSS_MSS_IRQ 11`
114			`fi`
115
116			`if [ "$CONFIG_PSS" = "y" ]; then`
117			`int 'PSS audio DMA 0, 1 or 3' PSS_MSS_DMA 3`
118			`fi`
119
120			`if [ "$CONFIG_PSS" = "y" ]; then`
121			`hex 'PSS MIDI I/O base ' PSS_MPU_BASE 330`
122			`fi`
123
124			`if [ "$CONFIG_PSS" = "y" ]; then`
125			`int 'PSS MIDI IRQ 3, 4, 5, 7 or 9' PSS_MPU_IRQ 9`
126			`fi`
127
128			`if [ "$CONFIG_MSS" = "y" ]; then`
129			`hex 'MSS/WSS I/O base 530, 604, E80 or F40' MSS_BASE 530`
130			`fi`
131
132			`if [ "$CONFIG_MSS" = "y" ]; then`
133			`int 'MSS/WSS IRQ 7, 9, 10 or 11' MSS_IRQ 11`
134			`fi`
135
136			`if [ "$CONFIG_MSS" = "y" ]; then`
137			`int 'MSS/WSS DMA 0, 1 or 3' MSS_DMA 3`
138			`fi`
139
140			`if [ "$CONFIG_SSCAPE" = "y" ]; then`
141			`hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' SSCAPE_BASE 330`
142			`fi`
143
144			`if [ "$CONFIG_SSCAPE" = "y" ]; then`
145			`int 'SoundScape MIDI IRQ ' SSCAPE_IRQ 9`
146			`fi`
147
148			`if [ "$CONFIG_SSCAPE" = "y" ]; then`
149			`int 'SoundScape initialization DMA 0, 1 or 3' SSCAPE_DMA 3`
150			`fi`
151
152			`if [ "$CONFIG_SSCAPE" = "y" ]; then`
153			`hex 'SoundScape audio I/O base 534, 608, E84 or F44' SSCAPE_MSS_BASE 534`
154			`fi`
155
156			`if [ "$CONFIG_SSCAPE" = "y" ]; then`
157			`int 'SoundScape audio IRQ 7, 9, 10 or 11' SSCAPE_MSS_IRQ 11`
158			`fi`
159
160			`if [ "$CONFIG_TRIX" = "y" ]; then`
161			`hex 'AudioTrix audio I/O base 530, 604, E80 or F40' TRIX_BASE 530`
162			`fi`
163
164			`if [ "$CONFIG_TRIX" = "y" ]; then`
165			`int 'AudioTrix audio IRQ 7, 9, 10 or 11' TRIX_IRQ 11`
166			`fi`
167
168			`if [ "$CONFIG_TRIX" = "y" ]; then`
169			`int 'AudioTrix audio DMA 0, 1 or 3' TRIX_DMA 0`
170			`fi`
171
172			`if [ "$CONFIG_TRIX" = "y" ]; then`
173			`int 'AudioTrix second (duplex) DMA 0, 1 or 3' TRIX_DMA2 3`
174			`fi`
175
176			`if [ "$CONFIG_TRIX" = "y" ]; then`
177			`hex 'AudioTrix MIDI I/O base 330, 370, 3B0 or 3F0' TRIX_MPU_BASE 330`
178			`fi`
179
180			`if [ "$CONFIG_TRIX" = "y" ]; then`
181			`int 'AudioTrix MIDI IRQ 3, 4, 5, 7 or 9' TRIX_MPU_IRQ 9`
182			`fi`
183
184			`if [ "$CONFIG_TRIX" = "y" ]; then`
185			`hex 'AudioTrix SB I/O base 220, 210, 230, 240, 250, 260 or 270' TRIX_SB_BASE 220`
186			`fi`
187
188			`if [ "$CONFIG_TRIX" = "y" ]; then`
189			`int 'AudioTrix SB IRQ 3, 4, 5 or 7' TRIX_SB_IRQ 7`
190			`fi`
191
192			`if [ "$CONFIG_TRIX" = "y" ]; then`
193			`int 'AudioTrix SB DMA 1 or 3' TRIX_SB_DMA 1`
194			`fi`
195
196			`if [ "$CONFIG_CS4232" = "y" ]; then`
197			`hex 'CS4232 audio I/O base 530, 604, E80 or F40' CS4232_BASE 530`
198			`fi`
199
200			`if [ "$CONFIG_CS4232" = "y" ]; then`
201			`int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CS4232_IRQ 11`
202			`fi`
203
204			`if [ "$CONFIG_CS4232" = "y" ]; then`
205			`int 'CS4232 audio DMA 0, 1 or 3' CS4232_DMA 0`
206			`fi`
207
208			`if [ "$CONFIG_CS4232" = "y" ]; then`
209			`int 'CS4232 second (duplex) DMA 0, 1 or 3' CS4232_DMA2 3`
210			`fi`
211
212			`if [ "$CONFIG_CS4232" = "y" ]; then`
213			`hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CS4232_MPU_BASE 330`
214			`fi`
215
216			`if [ "$CONFIG_CS4232" = "y" ]; then`
217			`int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CS4232_MPU_IRQ 9`
218			`fi`
219
220			`if [ "$CONFIG_MAD16" = "y" ]; then`
221			`hex 'MAD16 audio I/O base 530, 604, E80 or F40' MAD16_BASE 530`
222			`fi`
223
224			`if [ "$CONFIG_MAD16" = "y" ]; then`
225			`int 'MAD16 audio IRQ 7, 9, 10 or 11' MAD16_IRQ 11`
226			`fi`
227
228			`if [ "$CONFIG_MAD16" = "y" ]; then`
229			`int 'MAD16 audio DMA 0, 1 or 3' MAD16_DMA 3`
230			`fi`
231
232			`if [ "$CONFIG_MAD16" = "y" ]; then`
233			`int 'MAD16 second (duplex) DMA 0, 1 or 3' MAD16_DMA2 0`
234			`fi`
235
236			`if [ "$CONFIG_MAD16" = "y" ]; then`
237			`hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' MAD16_MPU_BASE 330`
238			`fi`
239
240			`if [ "$CONFIG_MAD16" = "y" ]; then`
241			`int 'MAD16 MIDI IRQ 5, 7, 9 or 10' MAD16_MPU_IRQ 9`
242			`fi`
243
244			`if [ "$CONFIG_AUDIO" = "y" ]; then`
245			`int 'Audio DMA buffer size 4096, 16384, 32768 or 65536' DSP_BUFFSIZE 65536`
246			`fi`
247			`#`
248			`$MAKE -C drivers/sound kernelconfig \|\| exit 1`
249			`bool 'Additional low level drivers' CONFIG_LOWLEVEL_SOUND`
250
251			`if [ "$CONFIG_LOWLEVEL_SOUND" = "y" ]; then`
252			`bool 'ACI mixer (miroPCM12)' CONFIG_ACI_MIXER`
253			`fi`