URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [include/] [asm-sparc/] [kdebug.h] - Blame information for rev 1633

Go to most recent revision | Details | Compare with Previous | View Log


/* $Id: kdebug.h,v 1.1 2005-12-20 11:32:11 jcastillo Exp $
 * kdebug.h:  Defines and definitions for debugging the Linux kernel
 *            under various kernel debuggers.
 *
 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
 */
#ifndef _SPARC_KDEBUG_H
#define _SPARC_KDEBUG_H
 
#include <asm/openprom.h>
 
/* The debugger lives in 1MB of virtual address space right underneath
 * the boot prom.
 */
 
#define DEBUG_FIRSTVADDR       0xffc00000
#define DEBUG_LASTVADDR        LINUX_OPPROM_BEGVM
 
/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
 * if you want to drop into the debugger you do:
 *
 * t DEBUG_BP_TRAP
 */
 
#define DEBUG_BP_TRAP     126
 
#ifndef __ASSEMBLY__
/* The debug vector is passed in %o1 at boot time.  It is a pointer to
 * a structure in the debuggers address space.  Here is its format.
 */
 
typedef unsigned int (*debugger_funct)(void);
 
struct kernel_debug {
        /* First the entry point into the debugger.  You jump here
         * to give control over to the debugger.
         */
        unsigned long kdebug_entry;
        unsigned long kdebug_trapme;   /* Figure out later... */
        /* The following is the number of pages that the debugger has
         * taken from to total pool.
         */
        unsigned long *kdebug_stolen_pages;
        /* Ok, after you remap yourself and/or change the trap table
         * from what you were left with at boot time you have to call
         * this synchronization function so the debugger can check out
         * what you have done.
         */
        debugger_funct teach_debugger;
}; /* I think that is it... */
 
extern struct kernel_debug *linux_dbvec;
 
/* Use this macro in C-code to enter the debugger. */
extern __inline__ void sp_enter_debugger(void)
{
        __asm__ __volatile__("jmpl %0, %%o7\n\t"
                             "nop\n\t" : :
                             "r" (linux_dbvec) : "o7", "memory");
}
 
#define SP_ENTER_DEBUGGER do { \
             if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
               sp_enter_debugger(); \
                       } while(0)
 
#endif /* !(__ASSEMBLY__) */
 
/* Some nice offset defines for assembler code. */
#define KDEBUG_ENTRY_OFF    0x0
#define KDEBUG_DUNNO_OFF    0x4
#define KDEBUG_DUNNO2_OFF   0x8
#define KDEBUG_TEACH_OFF    0xc
 
/* ugh... */
#define TRAP_TRACE(reg1, reg2) \
 
 
#endif /* !(_SPARC_KDEBUG_H) */

Line No.	Rev	Author	Line
1	1633	jcastillo	`/* $Id: kdebug.h,v 1.1 2005-12-20 11:32:11 jcastillo Exp $`
2			`* kdebug.h: Defines and definitions for debugging the Linux kernel`
3			`* under various kernel debuggers.`
4			`*`
5			`* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)`
6			`*/`
7			`#ifndef _SPARC_KDEBUG_H`
8			`#define _SPARC_KDEBUG_H`
9
10			`#include <asm/openprom.h>`
11
12			`/* The debugger lives in 1MB of virtual address space right underneath`
13			`* the boot prom.`
14			`*/`
15
16			`#define DEBUG_FIRSTVADDR 0xffc00000`
17			`#define DEBUG_LASTVADDR LINUX_OPPROM_BEGVM`
18
19			`/* Breakpoints are enter through trap table entry 126. So in sparc assembly`
20			`* if you want to drop into the debugger you do:`
21			`*`
22			`* t DEBUG_BP_TRAP`
23			`*/`
24
25			`#define DEBUG_BP_TRAP 126`
26
27			`#ifndef __ASSEMBLY__`
28			`/* The debug vector is passed in %o1 at boot time. It is a pointer to`
29			`* a structure in the debuggers address space. Here is its format.`
30			`*/`
31
32			`typedef unsigned int (*debugger_funct)(void);`
33
34			`struct kernel_debug {`
35			`/* First the entry point into the debugger. You jump here`
36			`* to give control over to the debugger.`
37			`*/`
38			`unsigned long kdebug_entry;`
39			`unsigned long kdebug_trapme; /* Figure out later... */`
40			`/* The following is the number of pages that the debugger has`
41			`* taken from to total pool.`
42			`*/`
43			`unsigned long *kdebug_stolen_pages;`
44			`/* Ok, after you remap yourself and/or change the trap table`
45			`* from what you were left with at boot time you have to call`
46			`* this synchronization function so the debugger can check out`
47			`* what you have done.`
48			`*/`
49			`debugger_funct teach_debugger;`
50			`}; /* I think that is it... */`
51
52			`extern struct kernel_debug *linux_dbvec;`
53
54			`/* Use this macro in C-code to enter the debugger. */`
55			`extern __inline__ void sp_enter_debugger(void)`
56			`{`
57			`__asm__ __volatile__("jmpl %0, %%o7\n\t"`
58			`"nop\n\t" : :`
59			`"r" (linux_dbvec) : "o7", "memory");`
60			`}`
61
62			`#define SP_ENTER_DEBUGGER do { \`
63			`if((linux_dbvec!=0) && (((short )linux_dbvec)!=-1)) \`
64			`sp_enter_debugger(); \`
65			`} while(0)`
66
67			`#endif /* !(__ASSEMBLY__) */`
68
69			`/* Some nice offset defines for assembler code. */`
70			`#define KDEBUG_ENTRY_OFF 0x0`
71			`#define KDEBUG_DUNNO_OFF 0x4`
72			`#define KDEBUG_DUNNO2_OFF 0x8`
73			`#define KDEBUG_TEACH_OFF 0xc`
74
75			`/* ugh... */`
76			`#define TRAP_TRACE(reg1, reg2) \`
77
78
79			`#endif /* !(_SPARC_KDEBUG_H) */`

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [include/] [asm-sparc/] [kdebug.h] - Blame information for rev 1633