URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rtems-20020807/] [scripts/] [buildalltar.in] - Blame information for rev 1774

Go to most recent revision | Details | Compare with Previous | View Log


#! /bin/sh
#
#  Generate all the specs and then cycle through building them.
#
 
RTEMS_DIR=`dirname $0`
CFG=./setup.cache
#dst=/usr/src/redhat/SPECS
dst=`pwd`
target=@target@
rpm_cpu=i386
 
usage()
{
  echo "$0 [options] "
  echo "  options:"
  echo "    -b                  -- build binutils"
  echo "    -g                  -- build gcc/newlib"
  echo "    -d                  -- build gdb"
  echo "    -C HOST             -- build canadian cross for HOST "
  echo "    -t                  -- enable test/debug mode"
  echo "    -cfg "
  echo "    -o "
  exit 1 ;
}
 
#
#  Checks the status returned by executables and exits if it is non-zero.
#
check_fatal()
{
  if [ $1 -ne 0 ] ; then
    shift
    echo "ERROR: $*" >&2
    exit 1
  fi
  #echo
  #echo "End of $*"
  #echo -n "Press return to continue> "
  #echo
  #read line
}
 
testing=no
do_binutils=no
do_gccnewlib=no
do_gdb=no
cdn_cross=no
 
while test $# -ge 1; do
  case $1 in
    -b) do_binutils=yes  ; shift;;
    -g) do_gccnewlib=yes ; shift;;
    -d) do_gdb=yes       ; shift;;
    -t) do_test=yes      ; shift;;
    -cfg)
      test $# -ge 2 || usage
      shift
      CFG=$1
      shift
      ;;
    -o)
      test $# -ge 2 || usage
      shift
      dst=$1
      shift
      ;;
    -C)
      test $# -ge 2 || usage
      shift
      build=$1
      shift
      if ! test -x ${RTEMS_DIR}/../config.guess ; then
        echo "Missing ${RTEMS_DIR}/../config.guess!"
        exit 1
      fi
      CDN_ARGS="--build=`${RTEMS_DIR}/../config.guess` --host=${build}"
      cdn_cross=yes
      ;;
    -*)
      echo "invalid option $1";
      usage
      ;;
    *)
      TARGETS="${TARGETS} $1"
      shift
      ;;
  esac
done
 
if test ${do_binutils} = no -a ${do_gccnewlib} = no -a ${do_gdb} = no ; then
  echo "You must request building binutils, gcc/newlib, or gdb."
  usage
fi
 
 
# This is the full list .. hppa1.1 does not build now.
#ALL_TARGETS="hppa1.1-rtems i386-rtems i960-rtems m68k-rtems \
#  m68k-rtemself mips-rtems mips64orion-rtems \
#  powerpc-rtems sh-rtems sh-rtemself sparc-rtems"
 
# This is the full buildable set.
if [ "X${TARGETS}" = "X" ] ; then
  # do not include c4x or hppa primary targets
  # do not include sh-elf or i960-elf secondary targets
  TARGETS="arm-rtems h8300-rtems i386-rtems i960-rtems m68k-rtems \
    mips-rtems mips64orion-rtems powerpc-rtems sh-rtems sparc-rtems"
fi
 
. $CFG
 
binutils=${binutils_version}
gcc=${gcc_version}
gdb=${gdb_version}
newlib=${newlib_version}
# also use binutils_rpm_release
buildroot=/tmp
 
#
#  Now get started
#
start=`date`
 
echo PATH=$PATH
 
if [ ${testing} = yes ] ; then
  ECHO=echo
fi
 
#installed_count=`rpm -q -g rtems | wc -l`
#if [ ${installed_count} -ne 0 ] ; then
#  echo This script should be run with NO rtems RPMs installed.
#  echo It appears that the following rtems RPMs are installed:
#  echo
#  rpm -qa | grep rtems
#  echo
#  echo Please remove these and restart this script.
#  exit 1
#fi
 
#echo Copying specs files.
#if [ ${testing} = no ] ; then
#  cd ${RTEMS_DIR}
#
#  # ./configure || exit 1
#  make        || exit 1
#
#  #  Now generate all the specs
#  for target in ${TARGETS}
#  do
#    tspecs=`find . -name "${target}*"`
#    if [ "X${tspecs}" = "X" ] ; then
#      echo RPM specifications were not generated for ${tspec}.
#      exit 1
#    fi
#    ${ECHO} cp -r ${tspecs} ${dst}
#  done
#fi
 
# clean up a bit before we start
cd ${dst}
test -d log || mkdir log
 
if [ "X${rpm_build_root}" = "X" ] ; then
  echo rpm_build_root NOT set!
  exit 1
fi
 
CWD=`pwd`
test -d tarballs || mkdir tarballs
 
OUT=${CWD}/tarballs
 
#  do all the tools
for target in ${TARGETS}
do
  bintarfile=${OUT}/${target}-binutils-${binutils}-${binutils_rpm_release}.tar
  if [ ${do_binutils} = yes ] ; then
    logfile=${CWD}/log/${target}-binutils
    # this part is for tar.bz2
    cd ${CWD}
    if [ ! -d binutils-${binutils} ] ; then
      echo Could not find binutils-${binutils}!
      exit 1
    fi
    rm -rf b-${target}-bin
    mkdir b-${target}-bin
    cd b-${target}-bin
    echo "Building binutils-${binutils} for ${target}"
    ../binutils-${binutils}/configure ${CDN_ARGS} --target=${target} \
      --verbose --prefix=/opt/rtems   >${logfile} 2>&1
    check_fatal $? "binutils configure"
 
    make all >>${logfile} 2>&1
    check_fatal $? "make all"
 
    make info >>${logfile} 2>&1
    check_fatal $? "make info"
 
    make prefix=${rpm_build_root}/opt/rtems install >>${logfile} 2>&1
    check_fatal $? "make install"
 
    make prefix=${rpm_build_root}/opt/rtems install-info >>${logfile} 2>&1
    check_fatal $? "make install-info"
 
    cd ${buildroot}
    tar cjf ${bintarfile}.bz2 opt
    cd ${CWD}
    rm -rf b-${target}-bin
    ${ECHO} rm -rf ${rpm_build_root}/opt
    #rm -rf ${rpm_build_root}/opt
  else
    echo Skipping binutils for ${target}
  fi
 
  #
  #  build gcc/newlib
  #
 
  if [ ${do_gccnewlib} = yes ] ; then
    logfile=${CWD}/log/${target}-gccnewlib
    # now build gcc/newlib
    # this part is for tar.bz2
 
    gcctarfile=${OUT}/${target}-gcc-${gcc}-newlib-${newlib}-${gccnewlib_rpm_release}.tar
    if [ ${cdn_cross} = "no" ] ; then
      bintarfile=${dst}/binaries/binutils-${binutils}-${binutils_rpm_release}/${target}-binutils-${binutils}-${binutils_rpm_release}.tar
      cd /
      rm -rf /opt/*
      tar xjf ${bintarfile}.bz2
    fi
 
    cd ${CWD}
    if [ ! -d gcc-${gcc} ] ; then
      echo Could not find gcc-${gcc}!
      exit 1
    fi
    if [ ! -d gcc-${gcc}/newlib ] ; then
      echo Could not find gcc-${gcc}/newlib!
      exit 1
    fi
    rm -rf b-${target}-gccnewlib
    mkdir b-${target}-gccnewlib
    cd b-${target}-gccnewlib
    echo "Building gcc-${gcc} for ${target}"
    ../gcc-${gcc}/configure ${CDN_ARGS} --target=${target} \
      --with-gnu-as --with-gnu-ld --with-newlib --verbose --enable-threads \
      --prefix=/opt/rtems '--enable-languages=c,c++' >${logfile} 2>&1
    check_fatal $? "gcc configure"
 
    make all >>${logfile} 2>&1
    check_fatal $? "make all"
 
    make info >>${logfile} 2>&1
    check_fatal $? "make info"
 
    make prefix=${rpm_build_root}/opt/rtems install >>${logfile} 2>&1
    check_fatal $? "make install"
 
    cd ${target}/newlib
    make prefix=${rpm_build_root}/opt/rtems install-info  >>${logfile} 2>&1
    check_fatal $? "newlib make install-info"
 
    cd ${buildroot}
    tar cjf ${gcctarfile}.bz2 opt
    cd ${CWD}
    rm -rf ${rpm_build_root}/opt
    rm -rf ${rpm_build_root}/opt/rtems
    rm -rf b-${target}-gccnewlib
  else
    echo Skipping gcc/newlib for ${target}
  fi
 
  #
  # build gdb
  #
 
  if [ ${do_gdb} = yes ] ; then
    # now build gdb
    gdbtarfile=${OUT}/${target}-gdb-${gdb}-${gdb_rpm_release}.tar
    logfile=${CWD}/log/${target}-gdb
 
    # this part is for tar.bz2
 
    if [ ! -d gdb-${gdb} ] ; then
      echo Could not find gdb-${gdb}!
      exit 1
    fi
    mkdir b-${target}-gdb
    cd b-${target}-gdb
    case ${target} in
      arm* | d10v* | d30v* | erc32* | fr30* | h8300* | h8500* | i960* | \
      m32r* | mcore* | mips* | mn10200* | mn10300* | sh* | sparc*| v850* | \
      w65* | z8k*)
        extra_configure_arguments="--enable-sim"
        ;;
     powerpc*)
        extra_configure_arguments="--enable-sim --enable-sim-powerpc --enable-sim-timebase --enable-sim-hardware"
        #  Enabling this causes the program image to be huge and causes
        #  some gcc/hosts combinations to run out of memory.
        #          --enable-sim-inline
        ;;
      *)
        ;;
esac
    echo "Building gdb-${gdb}/configure ${CDN_ARGS} --target=${target}"
    ../gdb-${gdb}/configure ${CDN_ARGS} --target=${target} \
      ${extra_configure_arguments} --verbose --prefix=/opt/rtems >${logfile} 2>&1
    check_fatal $? "make info"
 
    make all >>${logfile} 2>&1
    check_fatal $? "make all"
 
    make info >>${logfile} 2>&1
    check_fatal $? "make info"
 
    make prefix=${rpm_build_root}/opt/rtems install >>${logfile} 2>&1
    check_fatal $? "make install"
 
    make prefix=${rpm_build_root}/opt/rtems install-info >>${logfile} 2>&1
    check_fatal $? "make install-info"
 
    cd ${buildroot}
    tar cjf ${gdbtarfile}.bz2 opt
    cd ${CWD}
    ${ECHO} rm -rf ${rpm_build_root}/opt
    rm -rf ${rpm_build_root}/opt/rtems
    rm -rf b-${target}-gdb
  else
    echo Skipping gdb for ${target}
  fi
 
done
 
# Now we are done
 
stop=`date`
 
echo
echo "Started:  " $start
echo "Finished: " $stop
exit 0

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rtems-20020807/] [scripts/] [buildalltar.in] - Blame information for rev 1774

Line No.	Rev	Author	Line
1	1026	ivang	`#! /bin/sh`
2			`#`
3			`# Generate all the specs and then cycle through building them.`
4			`#`
5
6			RTEMS_DIR=`dirname $0`
7			`CFG=./setup.cache`
8			`#dst=/usr/src/redhat/SPECS`
9			dst=`pwd`
10			`target=@target@`
11			`rpm_cpu=i386`
12
13			`usage()`
14			`{`
15			`echo "$0 [options] "`
16			`echo " options:"`
17			`echo " -b -- build binutils"`
18			`echo " -g -- build gcc/newlib"`
19			`echo " -d -- build gdb"`
20			`echo " -C HOST -- build canadian cross for HOST "`
21			`echo " -t -- enable test/debug mode"`
22			`echo " -cfg "`
23			`echo " -o "`
24			`exit 1 ;`
25			`}`
26
27			`#`
28			`# Checks the status returned by executables and exits if it is non-zero.`
29			`#`
30			`check_fatal()`
31			`{`
32			`if [ $1 -ne 0 ] ; then`
33			`shift`
34			`echo "ERROR: $*" >&2`
35			`exit 1`
36			`fi`
37			`#echo`
38			`#echo "End of $*"`
39			`#echo -n "Press return to continue> "`
40			`#echo`
41			`#read line`
42			`}`
43
44			`testing=no`
45			`do_binutils=no`
46			`do_gccnewlib=no`
47			`do_gdb=no`
48			`cdn_cross=no`
49
50			`while test $# -ge 1; do`
51			`case $1 in`
52			`-b) do_binutils=yes ; shift;;`
53			`-g) do_gccnewlib=yes ; shift;;`
54			`-d) do_gdb=yes ; shift;;`
55			`-t) do_test=yes ; shift;;`
56			`-cfg)`
57			`test $# -ge 2 \|\| usage`
58			`shift`
59			`CFG=$1`
60			`shift`
61			`;;`
62			`-o)`
63			`test $# -ge 2 \|\| usage`
64			`shift`
65			`dst=$1`
66			`shift`
67			`;;`
68			`-C)`
69			`test $# -ge 2 \|\| usage`
70			`shift`
71			`build=$1`
72			`shift`
73			`if ! test -x ${RTEMS_DIR}/../config.guess ; then`
74			`echo "Missing ${RTEMS_DIR}/../config.guess!"`
75			`exit 1`
76			`fi`
77			CDN_ARGS="--build=`${RTEMS_DIR}/../config.guess` --host=${build}"
78			`cdn_cross=yes`
79			`;;`
80			`-*)`
81			`echo "invalid option $1";`
82			`usage`
83			`;;`
84			`*)`
85			`TARGETS="${TARGETS} $1"`
86			`shift`
87			`;;`
88			`esac`
89			`done`
90
91			`if test ${do_binutils} = no -a ${do_gccnewlib} = no -a ${do_gdb} = no ; then`
92			`echo "You must request building binutils, gcc/newlib, or gdb."`
93			`usage`
94			`fi`
95
96
97			`# This is the full list .. hppa1.1 does not build now.`
98			`#ALL_TARGETS="hppa1.1-rtems i386-rtems i960-rtems m68k-rtems \`
99			`# m68k-rtemself mips-rtems mips64orion-rtems \`
100			`# powerpc-rtems sh-rtems sh-rtemself sparc-rtems"`
101
102			`# This is the full buildable set.`
103			`if [ "X${TARGETS}" = "X" ] ; then`
104			`# do not include c4x or hppa primary targets`
105			`# do not include sh-elf or i960-elf secondary targets`
106			`TARGETS="arm-rtems h8300-rtems i386-rtems i960-rtems m68k-rtems \`
107			`mips-rtems mips64orion-rtems powerpc-rtems sh-rtems sparc-rtems"`
108			`fi`
109
110			`. $CFG`
111
112			`binutils=${binutils_version}`
113			`gcc=${gcc_version}`
114			`gdb=${gdb_version}`
115			`newlib=${newlib_version}`
116			`# also use binutils_rpm_release`
117			`buildroot=/tmp`
118
119			`#`
120			`# Now get started`
121			`#`
122			start=`date`
123
124			`echo PATH=$PATH`
125
126			`if [ ${testing} = yes ] ; then`
127			`ECHO=echo`
128			`fi`
129
130			#installed_count=`rpm -q -g rtems \| wc -l`
131			`#if [ ${installed_count} -ne 0 ] ; then`
132			`# echo This script should be run with NO rtems RPMs installed.`
133			`# echo It appears that the following rtems RPMs are installed:`
134			`# echo`
135			`# rpm -qa \| grep rtems`
136			`# echo`
137			`# echo Please remove these and restart this script.`
138			`# exit 1`
139			`#fi`
140
141			`#echo Copying specs files.`
142			`#if [ ${testing} = no ] ; then`
143			`# cd ${RTEMS_DIR}`
144			`#`
145			`# # ./configure \|\| exit 1`
146			`# make \|\| exit 1`
147			`#`
148			`# # Now generate all the specs`
149			`# for target in ${TARGETS}`
150			`# do`
151			# tspecs=`find . -name "${target}*"`
152			`# if [ "X${tspecs}" = "X" ] ; then`
153			`# echo RPM specifications were not generated for ${tspec}.`
154			`# exit 1`
155			`# fi`
156			`# ${ECHO} cp -r ${tspecs} ${dst}`
157			`# done`
158			`#fi`
159
160			`# clean up a bit before we start`
161			`cd ${dst}`
162			`test -d log \|\| mkdir log`
163
164			`if [ "X${rpm_build_root}" = "X" ] ; then`
165			`echo rpm_build_root NOT set!`
166			`exit 1`
167			`fi`
168
169			CWD=`pwd`
170			`test -d tarballs \|\| mkdir tarballs`
171
172			`OUT=${CWD}/tarballs`
173
174			`# do all the tools`
175			`for target in ${TARGETS}`
176			`do`
177			`bintarfile=${OUT}/${target}-binutils-${binutils}-${binutils_rpm_release}.tar`
178			`if [ ${do_binutils} = yes ] ; then`
179			`logfile=${CWD}/log/${target}-binutils`
180			`# this part is for tar.bz2`
181			`cd ${CWD}`
182			`if [ ! -d binutils-${binutils} ] ; then`
183			`echo Could not find binutils-${binutils}!`
184			`exit 1`
185			`fi`
186			`rm -rf b-${target}-bin`
187			`mkdir b-${target}-bin`
188			`cd b-${target}-bin`
189			`echo "Building binutils-${binutils} for ${target}"`
190			`../binutils-${binutils}/configure ${CDN_ARGS} --target=${target} \`
191			`--verbose --prefix=/opt/rtems >${logfile} 2>&1`
192			`check_fatal $? "binutils configure"`
193
194			`make all >>${logfile} 2>&1`
195			`check_fatal $? "make all"`
196
197			`make info >>${logfile} 2>&1`
198			`check_fatal $? "make info"`
199
200			`make prefix=${rpm_build_root}/opt/rtems install >>${logfile} 2>&1`
201			`check_fatal $? "make install"`
202
203			`make prefix=${rpm_build_root}/opt/rtems install-info >>${logfile} 2>&1`
204			`check_fatal $? "make install-info"`
205
206			`cd ${buildroot}`
207			`tar cjf ${bintarfile}.bz2 opt`
208			`cd ${CWD}`
209			`rm -rf b-${target}-bin`
210			`${ECHO} rm -rf ${rpm_build_root}/opt`
211			`#rm -rf ${rpm_build_root}/opt`
212			`else`
213			`echo Skipping binutils for ${target}`
214			`fi`
215
216			`#`
217			`# build gcc/newlib`
218			`#`
219
220			`if [ ${do_gccnewlib} = yes ] ; then`
221			`logfile=${CWD}/log/${target}-gccnewlib`
222			`# now build gcc/newlib`
223			`# this part is for tar.bz2`
224
225			`gcctarfile=${OUT}/${target}-gcc-${gcc}-newlib-${newlib}-${gccnewlib_rpm_release}.tar`
226			`if [ ${cdn_cross} = "no" ] ; then`
227			`bintarfile=${dst}/binaries/binutils-${binutils}-${binutils_rpm_release}/${target}-binutils-${binutils}-${binutils_rpm_release}.tar`
228			`cd /`
229			`rm -rf /opt/*`
230			`tar xjf ${bintarfile}.bz2`
231			`fi`
232
233			`cd ${CWD}`
234			`if [ ! -d gcc-${gcc} ] ; then`
235			`echo Could not find gcc-${gcc}!`
236			`exit 1`
237			`fi`
238			`if [ ! -d gcc-${gcc}/newlib ] ; then`
239			`echo Could not find gcc-${gcc}/newlib!`
240			`exit 1`
241			`fi`
242			`rm -rf b-${target}-gccnewlib`
243			`mkdir b-${target}-gccnewlib`
244			`cd b-${target}-gccnewlib`
245			`echo "Building gcc-${gcc} for ${target}"`
246			`../gcc-${gcc}/configure ${CDN_ARGS} --target=${target} \`
247			`--with-gnu-as --with-gnu-ld --with-newlib --verbose --enable-threads \`
248			`--prefix=/opt/rtems '--enable-languages=c,c++' >${logfile} 2>&1`
249			`check_fatal $? "gcc configure"`
250
251			`make all >>${logfile} 2>&1`
252			`check_fatal $? "make all"`
253
254			`make info >>${logfile} 2>&1`
255			`check_fatal $? "make info"`
256
257			`make prefix=${rpm_build_root}/opt/rtems install >>${logfile} 2>&1`
258			`check_fatal $? "make install"`
259
260			`cd ${target}/newlib`
261			`make prefix=${rpm_build_root}/opt/rtems install-info >>${logfile} 2>&1`
262			`check_fatal $? "newlib make install-info"`
263
264			`cd ${buildroot}`
265			`tar cjf ${gcctarfile}.bz2 opt`
266			`cd ${CWD}`
267			`rm -rf ${rpm_build_root}/opt`
268			`rm -rf ${rpm_build_root}/opt/rtems`
269			`rm -rf b-${target}-gccnewlib`
270			`else`
271			`echo Skipping gcc/newlib for ${target}`
272			`fi`
273
274			`#`
275			`# build gdb`
276			`#`
277
278			`if [ ${do_gdb} = yes ] ; then`
279			`# now build gdb`
280			`gdbtarfile=${OUT}/${target}-gdb-${gdb}-${gdb_rpm_release}.tar`
281			`logfile=${CWD}/log/${target}-gdb`
282
283			`# this part is for tar.bz2`
284
285			`if [ ! -d gdb-${gdb} ] ; then`
286			`echo Could not find gdb-${gdb}!`
287			`exit 1`
288			`fi`
289			`mkdir b-${target}-gdb`
290			`cd b-${target}-gdb`
291			`case ${target} in`
292			`arm* \| d10v* \| d30v* \| erc32* \| fr30* \| h8300* \| h8500* \| i960* \| \`
293			`m32r* \| mcore* \| mips* \| mn10200* \| mn10300* \| sh* \| sparc\| v850 \| \`
294			`w65* \| z8k*)`
295			`extra_configure_arguments="--enable-sim"`
296			`;;`
297			`powerpc*)`
298			`extra_configure_arguments="--enable-sim --enable-sim-powerpc --enable-sim-timebase --enable-sim-hardware"`
299			`# Enabling this causes the program image to be huge and causes`
300			`# some gcc/hosts combinations to run out of memory.`
301			`# --enable-sim-inline`
302			`;;`
303			`*)`
304			`;;`
305			`esac`
306			`echo "Building gdb-${gdb}/configure ${CDN_ARGS} --target=${target}"`
307			`../gdb-${gdb}/configure ${CDN_ARGS} --target=${target} \`
308			`${extra_configure_arguments} --verbose --prefix=/opt/rtems >${logfile} 2>&1`
309			`check_fatal $? "make info"`
310
311			`make all >>${logfile} 2>&1`
312			`check_fatal $? "make all"`
313
314			`make info >>${logfile} 2>&1`
315			`check_fatal $? "make info"`
316
317			`make prefix=${rpm_build_root}/opt/rtems install >>${logfile} 2>&1`
318			`check_fatal $? "make install"`
319
320			`make prefix=${rpm_build_root}/opt/rtems install-info >>${logfile} 2>&1`
321			`check_fatal $? "make install-info"`
322
323			`cd ${buildroot}`
324			`tar cjf ${gdbtarfile}.bz2 opt`
325			`cd ${CWD}`
326			`${ECHO} rm -rf ${rpm_build_root}/opt`
327			`rm -rf ${rpm_build_root}/opt/rtems`
328			`rm -rf b-${target}-gdb`
329			`else`
330			`echo Skipping gdb for ${target}`
331			`fi`
332
333			`done`
334
335			`# Now we are done`
336
337			stop=`date`
338
339			`echo`
340			`echo "Started: " $start`
341			`echo "Finished: " $stop`
342			`exit 0`