URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [armnommu/] [drivers/] [net/] [ether1.c] - Blame information for rev 1775

Go to most recent revision | Details | Compare with Previous | View Log

/*
 * linux/arch/arm/drivers/net/ether1.c
 *
 * Acorn ether1 driver (82586 chip)
 *
 * (c) 1996 Russell King
 */
 
/*
 * We basically keep two queues in the cards memory - one for transmit
 * and one for receive.  Each has a head and a tail.  The head is where
 * we/the chip adds packets to be transmitted/received, and the tail
 * is where the transmitter has got to/where the receiver will stop.
 * Both of these queues are circular, and since the chip is running
 * all the time, we have to be careful when we modify the pointers etc
 * so that the buffer memory is valid all the time.
 */
 
/*
 * Change log:
 * 1.00 RMK                     Released
 * 1.01 RMK     19/03/96        Transfers the last odd byte onto/off of the card now.
 * 1.02 RMK     25/05/97        Added code to restart RU if it goes not ready
 * 1.03 RMK     14/09/97        Cleaned up the handling of a reset during the TX interrupt.
 *                              Should prevent lockup.
 * 1.04 RMK     17/09/97        Added more info when initialsation of chip goes wrong.
 *                              TDR now only reports failure when chip reports non-zero
 *                              TDR time-distance.
 */
 
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/malloc.h>
#include <linux/string.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/errno.h>
 
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
 
#include <asm/ecard.h>
 
#define __ETHER1_C
#include "ether1.h"
 
static unsigned int net_debug = NET_DEBUG;
 
#define FUNC_PROLOGUE \
        struct ether1_priv *priv = (struct ether1_priv *)dev->priv
 
#define BUFFER_SIZE     0x10000
#define TX_AREA_START   0x00100
#define TX_AREA_END     0x05000
#define RX_AREA_START   0x05000
#define RX_AREA_END     0x0fc00
 
#define tx_done(dev) 0
/* ------------------------------------------------------------------------- */
static char *version = "ether1 ethernet driver (c) 1995 Russell King v1.04\n";
 
#define BUS_16 16
#define BUS_8  8
 
static const card_ids ether1_cids[] = {
        { MANU_ACORN, PROD_ACORN_ETHER1 },
        { 0xffff, 0xffff }
};
 
/* ------------------------------------------------------------------------- */
 
#define DISABLEIRQS 1
#define NORMALIRQS  0
 
#define ether1_inw(dev, addr, type, offset, svflgs) ether1_inw_p(dev, addr + (int)(&((type *)0)->offset), svflgs)
#define ether1_outw(dev, val, addr, type, offset, svflgs) ether1_outw_p(dev, val, addr + (int)(&((type *)0)->offset), svflgs)
 
static inline unsigned short
ether1_inw_p(const struct device *dev, int addr, const int svflgs)
{
    unsigned long flags;
    unsigned short ret;
 
    if (svflgs) {
        save_flags_cli(flags);
    }
    outb(addr >> 12, REG_PAGE);
    ret = inw(ETHER1_RAM + ((addr & 4095) >> 1));
    if (svflgs)
        restore_flags(flags);
    return ret;
}
 
static inline void
ether1_outw_p(const struct device *dev, unsigned short val, int addr, const int svflgs)
{
    unsigned long flags;
 
    if (svflgs) {
        save_flags_cli(flags);
    }
    outb(addr >> 12, REG_PAGE);
    outw(val, ETHER1_RAM + ((addr & 4095) >> 1));
    if (svflgs)
        restore_flags(flags);
}
 
static inline void *
ether1_inswb(unsigned int addr, void *data, unsigned int len)
{
    int used;
 
    addr = IO_BASE + (addr << 2);
 
    __asm__ __volatile__(
        "subs   %3, %3, #2
        bmi     2f
1:      ldr     %0, [%1], #4
        strb    %0, [%2], #1
        mov     %0, %0, lsr #8
        strb    %0, [%2], #1
        subs    %3, %3, #2
        bmi     2f
        ldr     %0, [%1], #4
        strb    %0, [%2], #1
        mov     %0, %0, lsr #8
        strb    %0, [%2], #1
        subs    %3, %3, #2
        bmi     2f
        ldr     %0, [%1], #4
        strb    %0, [%2], #1
        mov     %0, %0, lsr #8
        strb    %0, [%2], #1
        subs    %3, %3, #2
        bmi     2f
        ldr     %0, [%1], #4
        strb    %0, [%2], #1
        mov     %0, %0, lsr #8
        strb    %0, [%2], #1
        subs    %3, %3, #2
        bpl     1b
2:      adds    %3, %3, #1
        ldreqb  %0, [%1]
        streqb  %0, [%2]"
    : "=&r" (used), "=&r" (addr), "=&r" (data), "=&r" (len)
    :                "1"  (addr), "2"   (data), "3"   (len));
 
    return data;
}
 
static inline void *
ether1_outswb(unsigned int addr, void *data, unsigned int len)
{
    int used;
 
    addr = IO_BASE + (addr << 2);
 
    __asm__ __volatile__(
        "subs   %3, %3, #2
        bmi     2f
1:      ldr     %0, [%2], #2
        mov     %0, %0, lsl #16
        orr     %0, %0, %0, lsr #16
        str     %0, [%1], #4
        subs    %3, %3, #2
        bmi     2f
        ldr     %0, [%2], #2
        mov     %0, %0, lsl #16
        orr     %0, %0, %0, lsr #16
        str     %0, [%1], #4
        subs    %3, %3, #2
        bmi     2f
        ldr     %0, [%2], #2
        mov     %0, %0, lsl #16
        orr     %0, %0, %0, lsr #16
        str     %0, [%1], #4
        subs    %3, %3, #2
        bmi     2f
        ldr     %0, [%2], #2
        mov     %0, %0, lsl #16
        orr     %0, %0, %0, lsr #16
        str     %0, [%1], #4
        subs    %3, %3, #2
        bpl     1b
2:      adds    %3, %3, #1
        ldreqb  %0, [%2]
        streqb  %0, [%1]"
    : "=&r" (used), "=&r" (addr), "=&r" (data), "=&r" (len)
    :                "1"  (addr), "2"   (data), "3"   (len));
 
    return data;
}
 
 
static void
ether1_writebuffer(struct device *dev, void *data, unsigned int start, unsigned int length)
{
    unsigned int page, thislen, offset;
 
    offset = start & 4095;
 
    for (page = start >> 12; length; page++) {
        outb(page, REG_PAGE);
        if (offset + length > 4096) {
            length -= 4096 - offset;
            thislen = 4096 - offset;
        } else {
            thislen = length;
            length = 0;
        }
 
        data = ether1_outswb(ETHER1_RAM + (offset >> 1), data, thislen);
        offset = 0;
    }
}
 
static void
ether1_readbuffer(struct device *dev, void *data, unsigned int start, unsigned int length)
{
    unsigned int page, thislen, offset;
 
    offset = start & 4095;
 
    for (page = start >> 12; length; page++) {
        outb(page, REG_PAGE);
        if (offset + length > 4096) {
            length -= 4096 - offset;
            thislen = 4096 - offset;
        } else {
            thislen = length;
            length = 0;
        }
 
        data = ether1_inswb(ETHER1_RAM + (offset >> 1), data, thislen);
        offset = 0;
    }
}
 
static int
ether1_ramtest(struct device *dev, unsigned char byte)
{
    unsigned char *buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL);
    int i, ret = BUFFER_SIZE;
    int max_errors = 15;
    int bad = -1;
    int bad_start = 0;
 
    if (!buffer)
        return 1;
 
    memset(buffer, byte, BUFFER_SIZE);
    ether1_writebuffer(dev, buffer, 0, BUFFER_SIZE);
    memset(buffer, byte ^ 0xff, BUFFER_SIZE);
    ether1_readbuffer(dev, buffer, 0, BUFFER_SIZE);
 
    for (i = 0; i < BUFFER_SIZE; i++) {
        if (buffer[i] != byte) {
            if (max_errors >= 0 && bad != buffer[i]) {
                if (bad != -1)
                    printk("\n");
                printk(KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X",
                        dev->name, buffer[i], byte, i);
                ret = -ENODEV;
                max_errors --;
                bad = buffer[i];
                bad_start = i;
            }
        } else {
            if (bad != -1) {
                if (bad_start == i - 1)
                    printk("\n");
                else
                    printk(" - 0x%04X\n", i - 1);
                bad = -1;
            }
        }
    }
 
    if (bad != -1)
        printk(" - 0x%04X\n", BUFFER_SIZE);
    kfree(buffer);
 
    return ret;
}
 
static int
ether1_reset(struct device *dev)
{
    outb(CTRL_RST|CTRL_ACK, REG_CONTROL);
    return BUS_16;
}
 
static int
ether1_init_2(struct device *dev)
{
    int i;
    dev->mem_start = 0;
 
    i = ether1_ramtest(dev, 0x5a);
 
    if (i > 0)
        i = ether1_ramtest(dev, 0x1e);
 
    if (i <= 0)
        return -ENODEV;
 
    dev->mem_end = i;
    return 0;
}
 
/*
 * These are the structures that are loaded into the ether RAM card to
 * initialise the 82586
 */
 
/* at 0x0100 */
#define NOP_ADDR        (TX_AREA_START)
#define NOP_SIZE        (0x06)
static nop_t  init_nop  = {
        { 0, CMD_NOP },
        NOP_ADDR
};
 
/* at 0x003a */
#define TDR_ADDR        (0x003a)
#define TDR_SIZE        (0x08)
static tdr_t  init_tdr  = {
        { 0, CMD_TDR | CMD_INTR },
        NOP_ADDR, 0
};
 
/* at 0x002e */
#define MC_ADDR         (0x002e)
#define MC_SIZE         (0x0c)
static mc_t   init_mc   = {
        { 0, CMD_SETMULTICAST },
        TDR_ADDR, 0, { { 0, } }
};
 
/* at 0x0022 */
#define SA_ADDR         (0x0022)
#define SA_SIZE         (0x0c)
static sa_t   init_sa   = {
        { 0, CMD_SETADDRESS },
        MC_ADDR, { 0, }
};
 
/* at 0x0010 */
#define CFG_ADDR        (0x0010)
#define CFG_SIZE        (0x12)
static cfg_t  init_cfg  = {
        { 0, CMD_CONFIG },
        SA_ADDR,
        8,
        8,
        CFG8_SRDY,
        CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6),
        0,
        0x60,
        0,
        CFG13_RETRY(15) | CFG13_SLOTH(2),
        0,
};
 
/* at 0x0000 */
#define SCB_ADDR        (0x0000)
#define SCB_SIZE        (0x10)
static scb_t  init_scb  = {
        0,
        SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX,
        CFG_ADDR,
        RX_AREA_START,
        0,
        0,
        0,
 
};
 
/* at 0xffee */
#define ISCP_ADDR       (0xffee)
#define ISCP_SIZE       (0x08)
static iscp_t init_iscp = {
        1,
        SCB_ADDR,
        0x0000,
        0x0000
};
 
/* at 0xfff6 */
#define SCP_ADDR        (0xfff6)
#define SCP_SIZE        (0x0a)
static scp_t  init_scp  = {
        SCP_SY_16BBUS,
        { 0, 0 },
        ISCP_ADDR,
 
};
 
#define RFD_SIZE        (0x16)
#define RBD_SIZE        (0x0a)
#define TX_SIZE         (0x08)
#define TBD_SIZE        (0x08)
 
static void
ether1_setup_rx_buffer(struct device *dev)
{
        struct ether1_priv *priv = (struct ether1_priv *)dev->priv;
        unsigned int addr, next, next2;
        rfd_t rfd;
        rbd_t rbd;
 
        memset(&rfd, 0, sizeof(rfd));
        memset(&rbd, 0, sizeof(rbd));
 
        rbd.rbd_len = ETH_FRAME_LEN + 8;
 
        /*
         * setup circularly linked list of { rfd, rbd, buffer }, with
         * all rfds circularly linked, rbds circularly linked.
         * First rfd is linked to scp, first rbd is linked to first
         * rfd.  Last rbd has a suspend command.
         */
        addr = RX_AREA_START;
        do {
                next  = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
                next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
 
                if (next2 >= RX_AREA_END) {
                        next = RX_AREA_START;
                        rfd.hdr.command = RFD_CMDEL | RFD_CMDSUSPEND;
                        priv->rx_tail = addr;
                } else
                        rfd.hdr.command = 0;
 
                if (addr == RX_AREA_START)
                        rfd.rfd_rbdoffset = RX_AREA_START + RFD_SIZE;
                else
                        rfd.rfd_rbdoffset = 0;
 
                rfd.rfd_link = next;
                rbd.rbd_link = next + RFD_SIZE;
                rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE;
 
                ether1_writebuffer(dev, &rfd, addr, RFD_SIZE);
                ether1_writebuffer(dev, &rbd, addr + RFD_SIZE, RBD_SIZE);
                addr = next;
        } while (next2 < RX_AREA_END);
}
 
static int
ether1_init_for_open(struct device *dev)
{
    FUNC_PROLOGUE;
    int i, status;
    int failures = 0;
 
    outb(CTRL_RST|CTRL_ACK, REG_CONTROL);
 
    for (i = 0; i < 6; i++)
        init_sa.sa_addr[i] = dev->dev_addr[i];
 
    /* load data structures into ether1 RAM */
    ether1_writebuffer(dev, &init_scp,  SCP_ADDR,  SCP_SIZE);
    ether1_writebuffer(dev, &init_iscp, ISCP_ADDR, ISCP_SIZE);
    ether1_writebuffer(dev, &init_scb,  SCB_ADDR,  SCB_SIZE);
    ether1_writebuffer(dev, &init_cfg,  CFG_ADDR,  CFG_SIZE);
    ether1_writebuffer(dev, &init_sa,   SA_ADDR,   SA_SIZE);
    ether1_writebuffer(dev, &init_mc,   MC_ADDR,   MC_SIZE);
    ether1_writebuffer(dev, &init_tdr,  TDR_ADDR,  TDR_SIZE);
    ether1_writebuffer(dev, &init_nop,  NOP_ADDR,  NOP_SIZE);
 
    if (ether1_inw(dev, CFG_ADDR, cfg_t, hdr.command, NORMALIRQS) != CMD_CONFIG) {
        printk(KERN_ERR "%s: detected either RAM fault or compiler bug\n",
                dev->name);
        return 1;
    }
 
        ether1_setup_rx_buffer(dev);
 
    priv->tx_link = NOP_ADDR;
    priv->tx_head = NOP_ADDR + NOP_SIZE;
    priv->tx_tail = TDR_ADDR;
    priv->rx_head = RX_AREA_START;
 
    /* release reset & give 586 a prod */
    priv->resetting = 1;
    priv->initialising = 1;
    outb(CTRL_RST, REG_CONTROL);
    outb(0, REG_CONTROL);
    outb(CTRL_CA, REG_CONTROL);
 
    /* 586 should now unset iscp.busy */
    i = jiffies + HZ/2;
    while (ether1_inw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) {
        if (jiffies > i) {
            printk(KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name);
            return 1;
        }
    }
 
    /* check status of commands that we issued */
    i += HZ/10;
    while (((status = ether1_inw(dev, CFG_ADDR, cfg_t, hdr.status, DISABLEIRQS))
                & STAT_COMPLETE) == 0) {
        if (jiffies > i)
            break;
    }
 
    if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
        printk(KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status);
        printk(KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
                ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
        failures += 1;
    }
 
    i += HZ/10;
    while (((status = ether1_inw(dev, SA_ADDR, sa_t, hdr.status, DISABLEIRQS))
                & STAT_COMPLETE) == 0) {
        if (jiffies > i)
            break;
    }
 
    if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
        printk(KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status);
        printk(KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
                ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
        failures += 1;
    }
 
    i += HZ/10;
    while (((status = ether1_inw(dev, MC_ADDR, mc_t, hdr.status, DISABLEIRQS))
                & STAT_COMPLETE) == 0) {
        if (jiffies > i)
            break;
    }
 
    if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
        printk(KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status);
        printk(KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
                ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
        failures += 1;
    }
 
    i += HZ;
    while (((status = ether1_inw(dev, TDR_ADDR, tdr_t, hdr.status, DISABLEIRQS))
                & STAT_COMPLETE) == 0) {
        if (jiffies > i)
            break;
    }
 
    if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
        printk(KERN_WARNING "%s: can't tdr (ignored)\n", dev->name);
        printk(KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
                ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
                ether1_inw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
    } else {
        status = ether1_inw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS);
        if (status & TDR_XCVRPROB)
            printk(KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name);
        else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) {
#ifdef FANCY
            printk(KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name,
                    status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10,
                    (status & TDR_TIME) % 10);
#else
            printk(KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name,
                    status & TDR_SHORT ? "short" : "open", (status & TDR_TIME));
#endif
        }
    }
 
    if (failures)
        ether1_reset(dev);
    return failures ? 1 : 0;
}
 
static int
ether1_probe1(struct device *dev)
{
    static unsigned int version_printed = 0;
    struct ether1_priv *priv;
    int i;
 
    if (!dev->priv)
        dev->priv = kmalloc(sizeof (struct ether1_priv), GFP_KERNEL);
 
    if (!dev->priv)
        return 1;
 
    priv = (struct ether1_priv *)dev->priv;
    memset(priv, 0, sizeof (struct ether1_priv));
 
    if ((priv->bus_type = ether1_reset(dev)) == 0) {
        kfree(dev->priv);
        return 1;
    }
 
    if (net_debug && version_printed++ == 0)
        printk(KERN_INFO "%s", version);
 
    printk(KERN_INFO "%s: ether1 found at %08lX, IRQ%d, ether address", dev->name,
                dev->base_addr, dev->irq);
 
    request_region(dev->base_addr, 16, "ether1");
    request_region(dev->base_addr + 0x800, 4096, "ether1(ram)");
 
    for (i = 0; i < 6; i++)
        printk(i==0?" %02x":i==5?":%02x\n":":%02x", dev->dev_addr[i]);
 
    if (ether1_init_2(dev)) {
        kfree(dev->priv);
        return 1;
    }
 
    dev->open               = ether1_open;
    dev->stop               = ether1_close;
    dev->hard_start_xmit    = ether1_sendpacket;
    dev->get_stats          = ether1_getstats;
    dev->set_multicast_list = ether1_setmulticastlist;
 
    /* Fill in the fields of the device structure with ethernet values */
    ether_setup(dev);
 
    return 0;
}
 
/* ------------------------------------------------------------------------- */
 
static void
ether1_addr(struct device *dev)
{
    int i;
 
    for (i = 0; i < 6; i++)
        dev->dev_addr[i] = inb(IDPROM_ADDRESS + i);
}
 
int
ether1_probe(struct device *dev)
{
#ifndef MODULE
    struct expansion_card *ec;
 
    if (!dev)
        return ENODEV;
 
    ecard_startfind();
    if ((ec = ecard_find(0, ether1_cids)) == NULL)
        return ENODEV;
 
    dev->base_addr = ecard_address(ec, ECARD_IOC, ECARD_FAST);
    dev->irq       = ec->irq;
 
    ecard_claim(ec);
 
#endif
    ether1_addr(dev);
 
    if (ether1_probe1(dev) == 0)
        return 0;
    return ENODEV;
}
 
/* ------------------------------------------------------------------------- */
 
static int
ether1_txalloc(struct device *dev, int size)
{
    FUNC_PROLOGUE;
    int start, tail;
 
    size = (size + 1) & ~1;
    tail = priv->tx_tail;
 
    if (priv->tx_head + size > TX_AREA_END) {
        if (tail > priv->tx_head)
            return -1;
        start = TX_AREA_START;
        if (start + size > tail)
            return -1;
        priv->tx_head = start + size;
    } else {
        if (priv->tx_head < tail && (priv->tx_head + size) > tail)
            return -1;
        start = priv->tx_head;
        priv->tx_head += size;
    }
 
    return start;
}
 
static void
ether1_restart(struct device *dev, char *reason)
{
    FUNC_PROLOGUE;
    priv->stats.tx_errors ++;
 
    if (reason)
        printk(KERN_WARNING "%s: %s - resetting device\n", dev->name, reason);
    else
        printk(" - resetting device\n");
 
    ether1_reset(dev);
 
    dev->start = 0;
    dev->tbusy = 0;
 
    if (ether1_init_for_open(dev))
        printk(KERN_ERR "%s: unable to restart interface\n", dev->name);
 
    dev->start = 1;
}
 
static int
ether1_sendpacket(struct sk_buff *skb, struct device *dev)
{
    FUNC_PROLOGUE;
 
    if (priv->restart)
        ether1_restart(dev, NULL);
 
    if (dev->tbusy) {
        /*
         * If we get here, some higher level has decided that we are broken.
         * There should really be a "kick me" function call instead.
         */
        int tickssofar = jiffies - dev->trans_start;
 
        if (tickssofar < 5)
            return 1;
 
        /* Try to restart the adapter. */
        ether1_restart(dev, "transmit timeout, network cable problem?");
        dev->trans_start = jiffies;
    }
 
    /*
     * If some higher layer thinks we've missed a tx-done interrupt
     * we are passed NULL.  Caution: dev_tint() handles the cli()/sti()
     * itself.
     */
    if (skb == NULL) {
        dev_tint(dev);
        return 0;
    }
 
    /*
     * Block a timer-based transmit from overlapping.  This could better be
     * done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
     */
    if (set_bit(0, (void *)&dev->tbusy) != 0)
        printk(KERN_WARNING "%s: transmitter access conflict.\n", dev->name);
    else {
        int len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
        int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr;
        unsigned long flags;
        tx_t tx;
        tbd_t tbd;
        nop_t nop;
 
        /*
         * insert packet followed by a nop
         */
        txaddr = ether1_txalloc(dev, TX_SIZE);
        tbdaddr = ether1_txalloc(dev, TBD_SIZE);
        dataddr = ether1_txalloc(dev, len);
        nopaddr = ether1_txalloc(dev, NOP_SIZE);
 
        tx.hdr.status = 0;
        tx.hdr.command = CMD_TX | CMD_INTR;
        tx.tx_link = nopaddr;
        tx.tx_tbdoffset = tbdaddr;
        tbd.tbd_opts = TBD_EOL | len;
        tbd.tbd_link = I82586_NULL;
        tbd.tbd_bufl = dataddr;
        tbd.tbd_bufh = 0;
        nop.hdr.status = 0;
        nop.hdr.command = CMD_NOP;
        nop.nop_link = nopaddr;
 
        save_flags_cli(flags);
        ether1_writebuffer(dev, &tx, txaddr, TX_SIZE);
        ether1_writebuffer(dev, &tbd, tbdaddr, TBD_SIZE);
        ether1_writebuffer(dev, skb->data, dataddr, len);
        ether1_writebuffer(dev, &nop, nopaddr, NOP_SIZE);
        tmp = priv->tx_link;
        priv->tx_link = nopaddr;
 
        /* now reset the previous nop pointer */
        ether1_outw(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS);
 
        restore_flags(flags);
 
        /* handle transmit */
        dev->trans_start = jiffies;
 
        /* check to see if we have room for a full sized ether frame */
        tmp = priv->tx_head;
        tst = ether1_txalloc(dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
        priv->tx_head = tmp;
        if (tst != -1)
            dev->tbusy = 0;
    }
    dev_kfree_skb(skb, FREE_WRITE);
 
    return 0;
}
 
static void
ether1_xmit_done(struct device *dev)
{
    FUNC_PROLOGUE;
    nop_t nop;
    int caddr, tst;
 
    caddr = priv->tx_tail;
 
again:
    ether1_readbuffer(dev, &nop, caddr, NOP_SIZE);
 
    switch (nop.hdr.command & CMD_MASK) {
    case CMD_TDR:
        /* special case */
        if (ether1_inw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
                                != (unsigned short)I82586_NULL) {
            ether1_outw(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t,
                scb_command, NORMALIRQS);
            outb(CTRL_CA, REG_CONTROL);
        }
        priv->tx_tail = NOP_ADDR;
        return;
 
    case CMD_NOP:
        if (nop.nop_link == caddr) {
            if (priv->initialising == 0)
                printk(KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name);
            else
                priv->initialising = 0;
            return;
        }
        if (caddr == nop.nop_link)
                return;
        caddr = nop.nop_link;
        goto again;
 
    case CMD_TX:
        if (nop.hdr.status & STAT_COMPLETE)
            break;
        printk(KERN_ERR "%s: strange command complete without completed command\n", dev->name);
        priv->restart = 1;
        return;
 
    default:
        printk(KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name,
                nop.hdr.command & CMD_MASK, caddr);
        priv->restart = 1;
        return;
    }
 
    while (nop.hdr.status & STAT_COMPLETE) {
        if (nop.hdr.status & STAT_OK) {
            priv->stats.tx_packets ++;
            priv->stats.collisions += (nop.hdr.status & STAT_COLLISIONS);
        } else {
            priv->stats.tx_errors ++;
 
            if (nop.hdr.status & STAT_COLLAFTERTX)
                priv->stats.collisions ++;
            if (nop.hdr.status & STAT_NOCARRIER)
                priv->stats.tx_carrier_errors ++;
            if (nop.hdr.status & STAT_TXLOSTCTS)
                printk(KERN_WARNING "%s: cts lost\n", dev->name);
            if (nop.hdr.status & STAT_TXSLOWDMA)
                priv->stats.tx_fifo_errors ++;
            if (nop.hdr.status & STAT_COLLEXCESSIVE)
                priv->stats.collisions += 16;
        }
 
        if (nop.nop_link == caddr) {
            printk(KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name);
            break;
        }
 
        caddr = nop.nop_link;
        ether1_readbuffer(dev, &nop, caddr, NOP_SIZE);
        if ((nop.hdr.command & CMD_MASK) != CMD_NOP) {
            printk(KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name);
            break;
        }
 
        if (caddr == nop.nop_link)
            break;
 
        caddr = nop.nop_link;
        ether1_readbuffer(dev, &nop, caddr, NOP_SIZE);
        if ((nop.hdr.command & CMD_MASK) != CMD_TX) {
            printk(KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name);
            break;
        }
    }
    priv->tx_tail = caddr;
 
    caddr = priv->tx_head;
    tst = ether1_txalloc(dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
    priv->tx_head = caddr;
    if (tst != -1)
        dev->tbusy = 0;
 
    mark_bh(NET_BH);
}
 
static void
ether1_recv_done(struct device *dev)
{
    FUNC_PROLOGUE;
    int status;
    int nexttail, rbdaddr;
    rbd_t rbd;
 
    do {
        status = ether1_inw(dev, priv->rx_head, rfd_t, hdr.status, NORMALIRQS);
        if ((status & RFD_COMPLETE) == 0)
            break;
 
        rbdaddr = ether1_inw(dev, priv->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS);
        ether1_readbuffer(dev, &rbd, rbdaddr, RBD_SIZE);
 
        if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) {
            int length = rbd.rbd_status & RBD_ACNT;
            struct sk_buff *skb;
 
            length = (length + 1) & ~1;
            skb = dev_alloc_skb(length + 2);
 
            if (skb) {
                skb->dev = dev;
                skb_reserve(skb, 2);
 
                ether1_readbuffer(dev, skb_put(skb, length), rbd.rbd_bufl, length);
 
                skb->protocol = eth_type_trans(skb, dev);
                netif_rx(skb);
                priv->stats.rx_packets ++;
            } else
                priv->stats.rx_dropped ++;
        } else {
            printk(KERN_WARNING "%s: %s\n", dev->name,
                        (rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid");
            priv->stats.rx_dropped ++;
        }
 
        nexttail = ether1_inw(dev, priv->rx_tail, rfd_t, rfd_link, NORMALIRQS);
        /* nexttail should be rx_head */
        if (nexttail != priv->rx_head)
            printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n",
                        dev->name, nexttail, priv->rx_head);
        ether1_outw(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, hdr.command, NORMALIRQS);
        ether1_outw(dev, 0, priv->rx_tail, rfd_t, hdr.command, NORMALIRQS);
        ether1_outw(dev, 0, priv->rx_tail, rfd_t, hdr.status, NORMALIRQS);
        ether1_outw(dev, 0, priv->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS);
 
        priv->rx_tail = nexttail;
        priv->rx_head = ether1_inw(dev, priv->rx_head, rfd_t, rfd_link, NORMALIRQS);
    } while (1);
}
 
static void
ether1_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
    struct device *dev = (struct device *)dev_id;
    FUNC_PROLOGUE;
    int status;
 
    dev->interrupt = 1;
 
    status = ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS);
 
    if (status) {
        ether1_outw(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX),
                        SCB_ADDR, scb_t, scb_command, NORMALIRQS);
        outb(CTRL_CA | CTRL_ACK, REG_CONTROL);
        if (status & SCB_STCX) {
            ether1_xmit_done(dev);
        }
        if (status & SCB_STCNA) {
            if (priv->resetting == 0)
                printk(KERN_WARNING "%s: CU went not ready ???\n", dev->name);
            else
                priv->resetting += 1;
            if (ether1_inw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
                                != (unsigned short)I82586_NULL) {
                ether1_outw(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
                outb(CTRL_CA, REG_CONTROL);
            }
            if (priv->resetting == 2)
                priv->resetting = 0;
        }
        if (status & SCB_STFR) {
            ether1_recv_done(dev);
        }
        if (status & SCB_STRNR) {
            if (ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) {
                printk(KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name);
                ether1_outw(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
                outb(CTRL_CA, REG_CONTROL);
                priv->stats.rx_dropped ++;      /* we suspended due to lack of buffer space */
            } else
                printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name,
                    ether1_inw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS));
            printk(KERN_WARNING "RU ptr = %04X\n", ether1_inw(dev, SCB_ADDR, scb_t, scb_rfa_offset,
                                        NORMALIRQS));
        }
    } else
        outb(CTRL_ACK, REG_CONTROL);
 
    dev->interrupt = 0;
}
 
static int
ether1_open(struct device *dev)
{
    MOD_INC_USE_COUNT;
 
    if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev)) {
        MOD_DEC_USE_COUNT;
        return -EAGAIN;
    }
 
    dev->tbusy = 0;
    dev->interrupt = 0;
    dev->start = 1;
 
    if (ether1_init_for_open(dev)) {
        free_irq(dev->irq, dev);
        MOD_DEC_USE_COUNT;
        return -EAGAIN;
    }
 
    return 0;
}
 
static int
ether1_close(struct device *dev)
{
    dev->tbusy = 1;
    dev->start = 0;
 
    ether1_reset(dev);
 
    free_irq(dev->irq, dev);
 
    MOD_DEC_USE_COUNT;
    return 0;
}
 
static struct enet_statistics *
ether1_getstats(struct device *dev)
{
    FUNC_PROLOGUE;
    return &priv->stats;
}
 
/*
 * Set or clear the multicast filter for this adaptor.
 * num_addrs == -1      Promiscuous mode, receive all packets.
 * num_addrs == 0       Normal mode, clear multicast list.
 * num_addrs > 0        Multicast mode, receive normal and MC packets, and do
 *                      best-effort filtering.
 */
static void
ether1_setmulticastlist(struct device *dev)
{
}
 
/* ------------------------------------------------------------------------- */
 
#ifdef MODULE
 
static char ethernames[MAX_ECARDS][9];
static struct device *my_ethers[MAX_ECARDS];
static struct expansion_card *ec[MAX_ECARDS];
 
int
init_module(void)
{
    int i;
 
    for (i = 0; i < MAX_ECARDS; i++) {
        my_ethers[i] = NULL;
        ec[i] = NULL;
        strcpy(ethernames[i], "        ");
    }
 
    i = 0;
 
    ecard_startfind();
 
    do {
        if ((ec[i] = ecard_find(0, ether1_cids)) == NULL)
            break;
 
        my_ethers[i] = (struct device *)kmalloc(sizeof (struct device), GFP_KERNEL);
        memset(my_ethers[i], 0, sizeof (struct device));
 
        my_ethers[i]->irq = ec[i]->irq;
        my_ethers[i]->base_addr = ecard_address(ec[i], ECARD_IOC, ECARD_FAST);
        my_ethers[i]->init = ether1_probe;
        my_ethers[i]->name = ethernames[i];
 
        ecard_claim(ec[i]);
 
        if (register_netdev(my_ethers[i]) != 0) {
            for (i = 0; i < 4; i++) {
                if (my_ethers[i]) {
                    kfree(my_ethers[i]);
                    my_ethers[i] = NULL;
                }
                if (ec[i]) {
                    ecard_release(ec[i]);
                    ec[i] = NULL;
                }
            }
            return -EIO;
        }
        i++;
    } while (i < MAX_ECARDS);
 
    return i != 0 ? 0 : -ENODEV;
}
 
void
cleanup_module(void)
{
    int i;
 
    for (i = 0; i < MAX_ECARDS; i++) {
        if (my_ethers[i]) {
            unregister_netdev(my_ethers[i]);
            release_region(my_ethers[i]->base_addr, 16);
            release_region(my_ethers[i]->base_addr + 0x800, 4096);
            my_ethers[i] = NULL;
        }
        if (ec[i]) {
            ecard_release(ec[i]);
            ec[i] = NULL;
        }
    }
}
#endif /* MODULE */
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [armnommu/] [drivers/] [net/] [ether1.c] - Blame information for rev 1775

Line No.	Rev	Author	Line
1	199	simons	`/*`
2			`* linux/arch/arm/drivers/net/ether1.c`
3			`*`
4			`* Acorn ether1 driver (82586 chip)`
5			`*`
6			`* (c) 1996 Russell King`
7			`*/`
8
9			`/*`
10			`* We basically keep two queues in the cards memory - one for transmit`
11			`* and one for receive. Each has a head and a tail. The head is where`
12			`* we/the chip adds packets to be transmitted/received, and the tail`
13			`* is where the transmitter has got to/where the receiver will stop.`
14			`* Both of these queues are circular, and since the chip is running`
15			`* all the time, we have to be careful when we modify the pointers etc`
16			`* so that the buffer memory is valid all the time.`
17			`*/`
18
19			`/*`
20			`* Change log:`
21			`* 1.00 RMK Released`
22			`* 1.01 RMK 19/03/96 Transfers the last odd byte onto/off of the card now.`
23			`* 1.02 RMK 25/05/97 Added code to restart RU if it goes not ready`
24			`* 1.03 RMK 14/09/97 Cleaned up the handling of a reset during the TX interrupt.`
25			`* Should prevent lockup.`
26			`* 1.04 RMK 17/09/97 Added more info when initialsation of chip goes wrong.`
27			`* TDR now only reports failure when chip reports non-zero`
28			`* TDR time-distance.`
29			`*/`
30
31			`#include <linux/module.h>`
32			`#include <linux/kernel.h>`
33			`#include <linux/sched.h>`
34			`#include <linux/types.h>`
35			`#include <linux/fcntl.h>`
36			`#include <linux/interrupt.h>`
37			`#include <linux/ptrace.h>`
38			`#include <linux/ioport.h>`
39			`#include <linux/in.h>`
40			`#include <linux/malloc.h>`