OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [m68k/] [config.in] - Blame information for rev 1765

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 199 simons
#
2
# For a description of the syntax of this configuration file,
3
# see the Configure script.
4
#
5
mainmenu_name "Linux/68k Kernel Configuration"
6
 
7
mainmenu_option next_comment
8
comment 'Loadable module support'
9
bool 'Enable loadable module support' CONFIG_MODULES
10
if [ "$CONFIG_MODULES" = "y" ]; then
11
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
12
  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
13
fi
14
endmenu
15
 
16
mainmenu_option next_comment
17
comment 'General setup'
18
 
19
bool 'Amiga support' CONFIG_AMIGA
20
bool 'Atari support' CONFIG_ATARI
21
bool 'Macintosh support' CONFIG_MAC
22
bool '68040 floating point software package' CONFIG_FPSP_040
23
bool '68060 integer/floating point software package' CONFIG_IFPSP_060
24
bool 'Networking support' CONFIG_NET
25
bool 'System V IPC' CONFIG_SYSVIPC
26
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
27
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
28
if [ "$CONFIG_BINFMT_ELF" = "y" ]; then
29
  bool 'Compile kernel as ELF - if your GCC is ELF-GCC' CONFIG_KERNEL_ELF
30
fi
31
if [ "$CONFIG_AMIGA" = "y" ]; then
32
  bool 'Amiga AutoConfig Identification' CONFIG_ZORRO
33
fi
34
endmenu
35
 
36
#
37
# Block device driver configuration
38
#
39
mainmenu_option next_comment
40
comment 'Floppy, IDE, and other block devices'
41
 
42
tristate 'Normal floppy disk support' CONFIG_BLK_DEV_FD
43
bool 'IDE harddisk support' CONFIG_BLK_DEV_IDE
44
if [ "$CONFIG_AMIGA" = "y" ]; then
45
bool 'Amiga Cybervision support' CONFIG_FB_CYBER
46
bool 'Amiga Zorro II ramdisk support' CONFIG_AMIGA_Z2RAM
47
fi
48
if [ "$CONFIG_ATARI" = "y" ]; then
49
bool 'Atari ACSI support' CONFIG_ATARI_ACSI
50
fi
51
 
52
tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
53
if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
54
  bool '   Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
55
fi
56
 
57
tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
58
endmenu
59
 
60
if [ "$CONFIG_NET" = "y" ]; then
61
  source net/Config.in
62
fi
63
 
64
mainmenu_option next_comment
65
comment 'SCSI support'
66
 
67
tristate 'SCSI support' CONFIG_SCSI
68
 
69
if [ "$CONFIG_SCSI" != "n" ]; then
70
 
71
comment 'SCSI support type (disk, tape, CDrom)'
72
 
73
dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
74
dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
75
dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
76
dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
77
 
78
comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
79
 
80
bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
81
 
82
bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
83
 
84
mainmenu_option next_comment
85
comment 'SCSI low-level drivers'
86
 
87
if [ "$CONFIG_AMIGA" = "y" ]; then
88
bool 'A3000 WD33C93A support' CONFIG_A3000_SCSI
89
bool 'A2091 WD33C93A support' CONFIG_A2091_SCSI
90
bool 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI
91
fi
92
if [ "$CONFIG_ATARI" = "y" ]; then
93
dep_tristate 'Atari native SCSI support' CONFIG_ATARI_SCSI $CONFIG_SCSI
94
fi
95
#dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
96
endmenu
97
 
98
fi
99
endmenu
100
 
101
if [ "$CONFIG_NET" = "y" ]; then
102
 
103
mainmenu_option next_comment
104
comment 'Network device support'
105
 
106
bool 'Network device support' CONFIG_NETDEVICES
107
if [ "$CONFIG_NETDEVICES" = "y" ]; then
108
#
109
# Network device configuration
110
#
111
tristate 'Dummy net driver support' CONFIG_DUMMY
112
tristate 'SLIP (serial line) support' CONFIG_SLIP
113
if [ "$CONFIG_SLIP" != "n" ]; then
114
  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
115
fi
116
tristate 'PPP (point-to-point) support' CONFIG_PPP
117
if [ ! "$CONFIG_PPP" = "n" ]; then
118
  comment 'CCP compressors for PPP are only built as modules.'
119
fi
120
tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
121
if [ "$CONFIG_AMIGA" = "y" ]; then
122
  tristate 'Ariadne support' CONFIG_ARIADNE
123
  tristate 'A2065 support' CONFIG_A2065
124
  tristate 'Hydra support' CONFIG_HYDRA
125
fi
126
if [ "$CONFIG_ATARI" = "y" ]; then
127
  bool 'Atari Lance support' CONFIG_ATARILANCE
128
fi
129
fi
130
endmenu
131
 
132
fi
133
 
134
source fs/Config.in
135
 
136
mainmenu_option next_comment
137
comment 'Character devices'
138
 
139
bool 'Parallel printer support' CONFIG_PRINTER
140
if [ "$CONFIG_AMIGA" = "y" ]; then
141
  tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE
142
fi
143
if [ "$CONFIG_ATARI" = "y" ]; then
144
  tristate 'Atari mouse support' CONFIG_ATARIMOUSE
145
fi
146
if [ "$CONFIG_ATARI" = y ]; then
147
  tristate 'Atari MFP serial support' CONFIG_ATARI_MFPSER
148
  tristate 'Atari SCC serial support' CONFIG_ATARI_SCC
149
  tristate 'Atari MIDI serial support' CONFIG_ATARI_MIDI
150
fi
151
if [ "$CONFIG_AMIGA" = y ]; then
152
  tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
153
  bool 'GVP IO-Extender support' CONFIG_GVPIOEXT
154
  tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
155
fi
156
bool 'Support for user serial device modules' CONFIG_USERIAL
157
bool 'Watchdog Timer Support'   CONFIG_WATCHDOG
158
if [ "$CONFIG_WATCHDOG" != "n" ]; then
159
  bool '   Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
160
  bool '   Software Watchdog' CONFIG_SOFT_WATCHDOG
161
fi
162
bool 'Support for user misc device modules' CONFIG_UMISC
163
endmenu
164
 
165
mainmenu_option next_comment
166
comment 'Sound support'
167
 
168
bool 'Sound support' CONFIG_SOUND y
169
if [ "$CONFIG_SOUND" != "n" ]; then
170
  bool 'Amiga or Atari DMA sound support' CONFIG_DMASOUND y
171
fi
172
endmenu
173
 
174
mainmenu_option next_comment
175
comment 'Kernel hacking'
176
 
177
#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
178
bool 'Kernel profiling support' CONFIG_PROFILE
179
if [ "$CONFIG_PROFILE" = "y" ]; then
180
  int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
181
fi
182
endmenu

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.