Subversion Repositories or1k

static const char *version =

        "de600.c: $Revision: 1.1.1.1 $,  Bjorn Ekwall (bj0rn@blox.se)\n";

/*

 *      de600.c

 *

 *      Linux driver for the D-Link DE-600 Ethernet pocket adapter.

 *

 *      Portions (C) Copyright 1993, 1994 by Bjorn Ekwall

 *      The Author may be reached as bj0rn@blox.se

 *

 *      Based on adapter information gathered from DE600.ASM by D-Link Inc.,

 *      as included on disk C in the v.2.11 of PC/TCP from FTP Software.

 *      For DE600.asm:

 *              Portions (C) Copyright 1990 D-Link, Inc.

 *              Copyright, 1988-1992, Russell Nelson, Crynwr Software

 *

 *      Adapted to the sample network driver core for linux,

 *      written by: Donald Becker <becker@super.org>

 *      C/O Supercomputing Research Ctr., 17100 Science Dr., Bowie MD 20715

 *

 *      compile-command:

 *      "gcc -D__KERNEL__  -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer \

 *       -m486 -c de600.c

 *

 **************************************************************/

/*

 *      This program is free software; you can redistribute it and/or modify

 *      it under the terms of the GNU General Public License as published by

 *      the Free Software Foundation; either version 2, or (at your option)

 *      any later version.

 *

 *      This program is distributed in the hope that it will be useful,

 *      but WITHOUT ANY WARRANTY; without even the implied warranty of

 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *      GNU General Public License for more details.

 *

 *      You should have received a copy of the GNU General Public License

 *      along with this program; if not, write to the Free Software

 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 *

 **************************************************************/

/* Add another "; SLOW_DOWN_IO" here if your adapter won't work OK: */

#define DE600_SLOW_DOWN SLOW_DOWN_IO; SLOW_DOWN_IO; SLOW_DOWN_IO

 /*

 * If you still have trouble reading/writing to the adapter,

 * modify the following "#define": (see <asm/io.h> for more info)

#define REALLY_SLOW_IO

 */

#define SLOW_IO_BY_JUMPING /* Looks "better" than dummy write to port 0x80 :-) */

/*

 * If you want to enable automatic continuous checking for the DE600,

 * keep this #define enabled.

 * It doesn't cost much per packet, so I think it is worth it!

 * If you disagree, comment away the #define, and live with it...

 *

 */

#define CHECK_LOST_DE600

/*

 * Enable this #define if you want the adapter to do a "ifconfig down" on

 * itself when we have detected that something is possibly wrong with it.

 * The default behaviour is to retry with "adapter_init()" until success.

 * This should be used for debugging purposes only.

 * (Depends on the CHECK_LOST_DE600 above)

 *

 */

#define SHUTDOWN_WHEN_LOST

/*

 * See comment at "de600_rspace()"!

 * This is an *ugly* hack, but for now it achieves its goal of

 * faking a TCP flow-control that will not flood the poor DE600.

 *

 * Tricks TCP to announce a small max window (max 2 fast packets please :-)

 *

 * Comment away at your own risk!

 *

 * Update: Use the more general per-device maxwindow parameter instead.

 */

#undef FAKE_SMALL_MAX

/* use 0 for production, 1 for verification, >2 for debug */

#ifdef DE600_DEBUG

#define PRINTK(x) if (de600_debug >= 2) printk x

#else

#define DE600_DEBUG 0

#define PRINTK(x) /**/

#endif

unsigned int de600_debug = DE600_DEBUG;

#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/sched.h>

#include <linux/types.h>

#include <linux/fcntl.h>

#include <linux/string.h>

#include <linux/interrupt.h>

#include <linux/ioport.h>

#include <asm/io.h>

#include <linux/in.h>

#include <linux/ptrace.h>

#include <asm/system.h>

#include <linux/errno.h>

#include <linux/inet.h>

#include <linux/netdevice.h>

#include <linux/etherdevice.h>

#include <linux/skbuff.h>

#ifdef FAKE_SMALL_MAX

static unsigned long de600_rspace(struct sock *sk);

#include <net/sock.h>

#endif

#define netstats enet_statistics

typedef unsigned char byte;

/**************************************************

 *                                                *

 * Definition of D-Link Ethernet Pocket adapter   *

 *                                                *

 **************************************************/

/*

 * D-Link Ethernet pocket adapter ports

 */

/*

 * OK, so I'm cheating, but there are an awful lot of

 * reads and writes in order to get anything in and out

 * of the DE-600 with 4 bits at a time in the parallel port,

 * so every saved instruction really helps :-)

 *

 * That is, I don't care what the device struct says

 * but hope that Space.c will keep the rest of the drivers happy.

 */

#ifndef DE600_IO

#define DE600_IO 0x378

#endif

#define DATA_PORT       (DE600_IO)

#define STATUS_PORT     (DE600_IO + 1)

#define COMMAND_PORT    (DE600_IO + 2)

#ifndef DE600_IRQ

#define DE600_IRQ       7

#endif

/*

 * It really should look like this, and autoprobing as well...

 *

#define DATA_PORT       (dev->base_addr + 0)

#define STATUS_PORT     (dev->base_addr + 1)

#define COMMAND_PORT    (dev->base_addr + 2)

#define DE600_IRQ       dev->irq

 */

/*

 * D-Link COMMAND_PORT commands

 */

#define SELECT_NIC      0x04 /* select Network Interface Card */

#define SELECT_PRN      0x1c /* select Printer */

#define NML_PRN         0xec /* normal Printer situation */

#define IRQEN           0x10 /* enable IRQ line */

/*

 * D-Link STATUS_PORT

 */

#define RX_BUSY         0x80

#define RX_GOOD         0x40

#define TX_FAILED16     0x10

#define TX_BUSY         0x08

/*

 * D-Link DATA_PORT commands

 * command in low 4 bits

 * data in high 4 bits

 * select current data nibble with HI_NIBBLE bit

 */

#define WRITE_DATA      0x00 /* write memory */

#define READ_DATA       0x01 /* read memory */

#define STATUS          0x02 /* read  status register */

#define COMMAND         0x03 /* write command register (see COMMAND below) */

#define NULL_COMMAND    0x04 /* null command */

#define RX_LEN          0x05 /* read  received packet length */

#define TX_ADDR         0x06 /* set adapter transmit memory address */

#define RW_ADDR         0x07 /* set adapter read/write memory address */

#define HI_NIBBLE       0x08 /* read/write the high nibble of data,

                                or-ed with rest of command */

/*

 * command register, accessed through DATA_PORT with low bits = COMMAND

 */

#define RX_ALL          0x01 /* PROMISCUOUS */

#define RX_BP           0x02 /* default: BROADCAST & PHYSICAL ADDRESS */

#define RX_MBP          0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */

#define TX_ENABLE       0x04 /* bit 2 */

#define RX_ENABLE       0x08 /* bit 3 */

#define RESET           0x80 /* set bit 7 high */

#define STOP_RESET      0x00 /* set bit 7 low */

/*

 * data to command register

 * (high 4 bits in write to DATA_PORT)

 */

#define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */

#define RX_BASE_PAGE    0x20 /* bit 5, always set when specifying RX_ADDR */

#define FLIP_IRQ        0x40 /* bit 6 */

/*

 * D-Link adapter internal memory:

 *

 * 0-2K 1:st transmit page (send from pointer up to 2K)

 * 2-4K 2:nd transmit page (send from pointer up to 4K)

 *

 * 4-6K 1:st receive page (data from 4K upwards)

 * 6-8K 2:nd receive page (data from 6K upwards)

 *

 * 8K+  Adapter ROM (contains magic code and last 3 bytes of Ethernet address)

 */

#define MEM_2K          0x0800 /* 2048 */

#define MEM_4K          0x1000 /* 4096 */

#define MEM_6K          0x1800 /* 6144 */

#define NODE_ADDRESS    0x2000 /* 8192 */

#define RUNT 60         /* Too small Ethernet packet */

/**************************************************

 *                                                *

 *             End of definition                  *

 *                                                *

 **************************************************/

/*

 * Index to functions, as function prototypes.

 */

/* Routines used internally. (See "convenience macros") */

static byte     de600_read_status(struct device *dev);

static byte     de600_read_byte(unsigned char type, struct device *dev);

/* Put in the device structure. */

static int      de600_open(struct device *dev);

static int      de600_close(struct device *dev);

static struct netstats *get_stats(struct device *dev);

static int      de600_start_xmit(struct sk_buff *skb, struct device *dev);

/* Dispatch from interrupts. */

static void     de600_interrupt(int irq, void *dev_id, struct pt_regs *regs);

static int      de600_tx_intr(struct device *dev, int irq_status);

static void     de600_rx_intr(struct device *dev);

/* Initialization */

static void     trigger_interrupt(struct device *dev);

int             de600_probe(struct device *dev);

static int      adapter_init(struct device *dev);

/*

 * D-Link driver variables:

 */

static volatile int             rx_page         = 0;

#define TX_PAGES 2

static volatile int             tx_fifo[TX_PAGES];

static volatile int             tx_fifo_in = 0;

static volatile int             tx_fifo_out = 0;

static volatile int             free_tx_pages = TX_PAGES;

static int                      was_down = 0;

/*

 * Convenience macros/functions for D-Link adapter

 */

#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN

#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN

/* Thanks for hints from Mark Burton <markb@ordern.demon.co.uk> */

#define de600_put_byte(data) ( \

        outb_p(((data) << 4)   | WRITE_DATA            , DATA_PORT), \

        outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT))

/*

 * The first two outb_p()'s below could perhaps be deleted if there

 * would be more delay in the last two. Not certain about it yet...

 */

#define de600_put_command(cmd) ( \

        outb_p(( rx_page        << 4)   | COMMAND            , DATA_PORT), \

        outb_p(( rx_page        & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \

        outb_p(((rx_page | cmd) << 4)   | COMMAND            , DATA_PORT), \

        outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT))

#define de600_setup_address(addr,type) ( \

        outb_p((((addr) << 4) & 0xf0) | type            , DATA_PORT), \

        outb_p(( (addr)       & 0xf0) | type | HI_NIBBLE, DATA_PORT), \

        outb_p((((addr) >> 4) & 0xf0) | type            , DATA_PORT), \

        outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT))

#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K))

/* Flip bit, only 2 pages */

#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT)

#define tx_page_adr(a) (((a) + 1) * MEM_2K)

static inline byte

de600_read_status(struct device *dev)

{

        byte status;

        outb_p(STATUS, DATA_PORT);

        status = inb(STATUS_PORT);

        outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT);

        return status;

}

static inline byte

de600_read_byte(unsigned char type, struct device *dev) { /* dev used by macros */

        byte lo;

        (void)outb_p((type), DATA_PORT);

        lo = ((unsigned char)inb(STATUS_PORT)) >> 4;

        (void)outb_p((type) | HI_NIBBLE, DATA_PORT);

        return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo;

}

/*

 * Open/initialize the board.  This is called (in the current kernel)

 * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1).

 *

 * This routine should set everything up anew at each open, even

 * registers that "should" only need to be set once at boot, so that

 * there is a non-reboot way to recover if something goes wrong.

 */

static int

de600_open(struct device *dev)

{

        if (request_irq(DE600_IRQ, de600_interrupt, 0, "de600", NULL)) {

                printk ("%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);

                return 1;

        }

        irq2dev_map[DE600_IRQ] = dev;

        MOD_INC_USE_COUNT;

        dev->start = 1;

        if (adapter_init(dev)) {

                return 1;

        }

        return 0;

}

/*

 * The inverse routine to de600_open().

 */

static int

de600_close(struct device *dev)

{

        select_nic();

        rx_page = 0;

        de600_put_command(RESET);

        de600_put_command(STOP_RESET);

        de600_put_command(0);

        select_prn();

        if (dev->start) {

                free_irq(DE600_IRQ, NULL);

                irq2dev_map[DE600_IRQ] = NULL;

                dev->start = 0;

                MOD_DEC_USE_COUNT;

        }

        return 0;

}

static struct netstats *

get_stats(struct device *dev)

{

    return (struct netstats *)(dev->priv);

}

static inline void

trigger_interrupt(struct device *dev)

{

        de600_put_command(FLIP_IRQ);

        select_prn();

        DE600_SLOW_DOWN;

        select_nic();

        de600_put_command(0);

}

/*

 * Copy a buffer to the adapter transmit page memory.

 * Start sending.

 */

static int

de600_start_xmit(struct sk_buff *skb, struct device *dev)

{

        int     transmit_from;

        int     len;

        int     tickssofar;

        byte    *buffer = skb->data;

        /*

         * If some higher layer thinks we've missed a

         * tx-done interrupt we are passed NULL.

         * Caution: dev_tint() handles the cli()/sti() itself.

         */

        if (skb == NULL) {

                dev_tint(dev);

                return 0;

        }

        if (free_tx_pages <= 0) {        /* Do timeouts, to avoid hangs. */

                tickssofar = jiffies - dev->trans_start;

                if (tickssofar < 5)

                        return 1;

                /* else */

                printk("%s: transmit timed out (%d), %s?\n",

                        dev->name,

                        tickssofar,

                        "network cable problem"

                        );

                /* Restart the adapter. */

                if (adapter_init(dev)) {

                        return 1;

                }

        }

        /* Start real output */

        PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));

        if ((len = skb->len) < RUNT)

                len = RUNT;

        cli();

        select_nic();

        tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;

        tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */

#ifdef CHECK_LOST_DE600

        /* This costs about 40 instructions per packet... */

        de600_setup_address(NODE_ADDRESS, RW_ADDR);

        de600_read_byte(READ_DATA, dev);

        if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {

                if (adapter_init(dev)) {

                        sti();

                        return 1;

                }

        }

#endif

        de600_setup_address(transmit_from, RW_ADDR);

        for ( ; len > 0; --len, ++buffer)

                de600_put_byte(*buffer);

        if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */

                dev->trans_start = jiffies;

                dev->tbusy = 0;  /* allow more packets into adapter */

                /* Send page and generate a faked interrupt */

                de600_setup_address(transmit_from, TX_ADDR);

                de600_put_command(TX_ENABLE);

        }

        else {

                dev->tbusy = !free_tx_pages;

                select_prn();

        }

        sti(); /* interrupts back on */

#ifdef FAKE_SMALL_MAX

        /* This will "patch" the socket TCP proto at an early moment */

        if (skb->sk && (skb->sk->protocol == IPPROTO_TCP) &&

                (skb->sk->prot->rspace != &de600_rspace))

                skb->sk->prot->rspace = de600_rspace; /* Ugh! */

#endif

        dev_kfree_skb (skb, FREE_WRITE);

        return 0;

}

/*

 * The typical workload of the driver:

 * Handle the network interface interrupts.

 */

static void

de600_interrupt(int irq, void *dev_id, struct pt_regs * regs)

{

        struct device   *dev = irq2dev_map[irq];

        byte            irq_status;

        int             retrig = 0;

        int             boguscount = 0;

        /* This might just as well be deleted now, no crummy drivers present :-) */

        if ((dev == NULL) || (dev->start == 0) || (DE600_IRQ != irq)) {

                printk("%s: bogus interrupt %d\n", dev?dev->name:"DE-600", irq);

                return;

        }

        dev->interrupt = 1;

        select_nic();

        irq_status = de600_read_status(dev);

        do {

                PRINTK(("de600_interrupt (%02X)\n", irq_status));

                if (irq_status & RX_GOOD)

                        de600_rx_intr(dev);

                else if (!(irq_status & RX_BUSY))

                        de600_put_command(RX_ENABLE);

                /* Any transmission in progress? */

                if (free_tx_pages < TX_PAGES)

                        retrig = de600_tx_intr(dev, irq_status);

                else

                        retrig = 0;

                irq_status = de600_read_status(dev);

        } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) );

        /*

         * Yeah, it _looks_ like busy waiting, smells like busy waiting

         * and I know it's not PC, but please, it will only occur once

         * in a while and then only for a loop or so (< 1ms for sure!)

         */

        /* Enable adapter interrupts */

        dev->interrupt = 0;

        select_prn();

        if (retrig)

                trigger_interrupt(dev);

        sti();

        return;

}

static int

de600_tx_intr(struct device *dev, int irq_status)

{

        /*

         * Returns 1 if tx still not done

         */

        mark_bh(NET_BH);

        /* Check if current transmission is done yet */

        if (irq_status & TX_BUSY)

                return 1; /* tx not done, try again */

        /* else */

        /* If last transmission OK then bump fifo index */

        if (!(irq_status & TX_FAILED16)) {

                tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;

                ++free_tx_pages;

                ((struct netstats *)(dev->priv))->tx_packets++;

                dev->tbusy = 0;

        }

        /* More to send, or resend last packet? */

        if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) {

                dev->trans_start = jiffies;

                de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR);

                de600_put_command(TX_ENABLE);

                return 1;

        }

        /* else */

        return 0;

}

/*

 * We have a good packet, get it out of the adapter.

 */

static void

de600_rx_intr(struct device *dev)

{

        struct sk_buff  *skb;

        int             i;

        int             read_from;

        int             size;

        register unsigned char  *buffer;

        cli();

        /* Get size of received packet */

        size = de600_read_byte(RX_LEN, dev);    /* low byte */

        size += (de600_read_byte(RX_LEN, dev) << 8);    /* high byte */

        size -= 4;      /* Ignore trailing 4 CRC-bytes */

        /* Tell adapter where to store next incoming packet, enable receiver */

        read_from = rx_page_adr();

        next_rx_page();

        de600_put_command(RX_ENABLE);

        sti();

        if ((size < 32)  ||  (size > 1535)) {

                printk("%s: Bogus packet size %d.\n", dev->name, size);

                if (size > 10000)

                        adapter_init(dev);

                return;

        }

        skb = dev_alloc_skb(size+2);

        sti();

        if (skb == NULL) {

                printk("%s: Couldn't allocate a sk_buff of size %d.\n",

                        dev->name, size);

                return;

        }

        /* else */

        skb->dev = dev;

        skb_reserve(skb,2);     /* Align */

        /* 'skb->data' points to the start of sk_buff data area. */

        buffer = skb_put(skb,size);

        /* copy the packet into the buffer */

        de600_setup_address(read_from, RW_ADDR);

        for (i = size; i > 0; --i, ++buffer)

                *buffer = de600_read_byte(READ_DATA, dev);

        ((struct netstats *)(dev->priv))->rx_packets++; /* count all receives */

        skb->protocol=eth_type_trans(skb,dev);

        netif_rx(skb);

        /*

         * If any worth-while packets have been received, netif_rx()

         * has done a mark_bh(INET_BH) for us and will work on them

         * when we get to the bottom-half routine.

         */

}

int

de600_probe(struct device *dev)

{

        int     i;

        static struct netstats de600_netstats;

        /*dev->priv = kmalloc(sizeof(struct netstats), GFP_KERNEL);*/

        printk("%s: D-Link DE-600 pocket adapter", dev->name);

        /* Alpha testers must have the version number to report bugs. */

        if (de600_debug > 1)

                printk(version);

        /* probe for adapter */

        rx_page = 0;

        select_nic();

        (void)de600_read_status(dev);

        de600_put_command(RESET);

        de600_put_command(STOP_RESET);

        if (de600_read_status(dev) & 0xf0) {

                printk(": not at I/O %#3x.\n", DATA_PORT);

                return ENODEV;

        }

        /*

         * Maybe we found one,

         * have to check if it is a D-Link DE-600 adapter...

         */

        /* Get the adapter ethernet address from the ROM */

        de600_setup_address(NODE_ADDRESS, RW_ADDR);

        for (i = 0; i < ETH_ALEN; i++) {

                dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);

                dev->broadcast[i] = 0xff;

        }

        /* Check magic code */

        if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {

                /* OK, install real address */

                dev->dev_addr[0] = 0x00;

                dev->dev_addr[1] = 0x80;

                dev->dev_addr[2] = 0xc8;

                dev->dev_addr[3] &= 0x0f;

                dev->dev_addr[3] |= 0x70;

        } else {

                printk(" not identified in the printer port\n");

                return ENODEV;

        }

#if 0 /* Not yet */

        if (check_region(DE600_IO, 3)) {

                printk(", port 0x%x busy\n", DE600_IO);

                return EBUSY;

        }

#endif

        request_region(DE600_IO, 3, "de600");

        printk(", Ethernet Address: %02X", dev->dev_addr[0]);

        for (i = 1; i < ETH_ALEN; i++)

                printk(":%02X",dev->dev_addr[i]);

        printk("\n");

        /* Initialize the device structure. */

        /*dev->priv = kmalloc(sizeof(struct netstats), GFP_KERNEL);*/

        dev->priv = &de600_netstats;

        memset(dev->priv, 0, sizeof(struct netstats));

        dev->get_stats = get_stats;

        dev->open = de600_open;

        dev->stop = de600_close;

        dev->hard_start_xmit = &de600_start_xmit;

        ether_setup(dev);

        dev->flags&=~IFF_MULTICAST;

        select_prn();

        return 0;

}