Subversion Repositories or1k

/**************************************************************************

 * Initio 9100 device driver for Linux.

 *

 * Copyright (c) 1994-1998 Initio Corporation

 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>

 * All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2, or (at your option)

 * any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; see the file COPYING.  If not, write to

 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

 *

 * --------------------------------------------------------------------------

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions

 * are met:

 * 1. Redistributions of source code must retain the above copyright

 *    notice, this list of conditions, and the following disclaimer,

 *    without modification, immediately at the beginning of the file.

 * 2. Redistributions in binary form must reproduce the above copyright

 *    notice, this list of conditions and the following disclaimer in the

 *    documentation and/or other materials provided with the distribution.

 * 3. The name of the author may not be used to endorse or promote products

 *    derived from this software without specific prior written permission.

 *

 * Where this Software is combined with software released under the terms of

 * the GNU Public License ("GPL") and the terms of the GPL would require the

 * combined work to also be released under the terms of the GPL, the terms

 * and conditions of this License will apply in addition to those of the

 * GPL with the exception of any terms or conditions of this License that

 * conflict with, or are expressly prohibited by, the GPL.

 *

 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND

 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR

 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

 * SUCH DAMAGE.

 *

 *************************************************************************

 *

 * DESCRIPTION:

 *

 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host

 * adapters

 *

 * 08/06/97 hc  - v1.01h

 *              - Support inic-940 and inic-935

 * 09/26/97 hc  - v1.01i

 *              - Make correction from J.W. Schultz suggestion

 * 10/13/97 hc  - Support reset function

 * 10/21/97 hc  - v1.01j

 *              - Support 32 LUN (SCSI 3)

 * 01/14/98 hc  - v1.01k

 *              - Fix memory allocation problem

 * 03/04/98 hc  - v1.01l

 *              - Fix tape rewind which will hang the system problem

 *              - Set can_queue to tul_num_scb

 * 06/25/98 hc  - v1.01m

 *              - Get it work for kernel version >= 2.1.75

 *              - Dynamic assign SCSI bus reset holding time in init_tulip()

 * 07/02/98 hc  - v1.01n

 *              - Support 0002134A

 * 08/07/98 hc  - v1.01o

 *              - Change the tul_abort_srb routine to use scsi_done. <01>

 * 09/07/98 hl  - v1.02

 *              - Change the INI9100U define and proc_dir_entry to

 *                reflect the newer Kernel 2.1.118, but the v1.o1o

 *                should work with Kernel 2.1.118.

 * 09/20/98 wh  - v1.02a

 *              - Support Abort command.

 *              - Handle reset routine.

 * 09/21/98 hl  - v1.03

 *              - remove comments.

 * 12/09/98 bv  - v1.03a

 *              - Removed unused code

 * 12/13/98 bv  - v1.03b

 *              - Remove cli() locking for kernels >= 2.1.95. This uses

 *                spinlocks to serialize access to the pSRB_head and

 *                pSRB_tail members of the HCS structure.

 * 09/01/99 bv  - v1.03d

 *              - Fixed a deadlock problem in SMP.

 * 21/01/99 bv  - v1.03e

 *              - Add support for the Domex 3192U PCI SCSI

 *                This is a slightly modified patch by

 *                Brian Macy <bmacy@sunshinecomputing.com>

 * 22/02/99 bv  - v1.03f

 *              - Didn't detect the INIC-950 in 2.0.x correctly.

 *                Now fixed.

 **************************************************************************/

#define CVT_LINUX_VERSION(V,P,S)        (V * 65536 + P * 256 + S)

#ifndef LINUX_VERSION_CODE

#include <linux/version.h>

#endif

#ifdef MODULE

#include <linux/module.h>

#endif

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

#include <stdarg.h>

#include <asm/io.h>

#include <asm/irq.h>

#include <linux/string.h>

#include <linux/errno.h>

#include <linux/kernel.h>

#include <linux/ioport.h>

#if LINUX_VERSION_CODE <= CVT_LINUX_VERSION(2,1,92)

#include <linux/bios32.h>

#endif

#include <linux/delay.h>

#include <linux/sched.h>

#include <linux/pci.h>

#include <linux/proc_fs.h>

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,23)

#include <linux/init.h>

#endif

#include <linux/blk.h>

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)

#include <asm/spinlock.h>

#endif

#include "sd.h"

#include "scsi.h"

#include "hosts.h"

#include "ini9100u.h"

#include <linux/stat.h>

#include <linux/malloc.h>

#include <linux/config.h>

#else

#include <linux/kernel.h>

#include <linux/head.h>

#include <linux/types.h>

#include <linux/string.h>

#include <linux/ioport.h>

#include <linux/sched.h>

#include <linux/proc_fs.h>

#include <asm/system.h>

#include <asm/io.h>

#include "../block/blk.h"

#include "scsi.h"

#include "sd.h"

#include "hosts.h"

#include <linux/malloc.h>

#include "ini9100u.h"

#endif

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,93)

#ifdef CONFIG_PCI

#include <linux/pci.h>

#endif

#endif

#ifdef DEBUG_i91u

unsigned int i91u_debug = DEBUG_DEFAULT;

#endif

#ifdef MODULE

Scsi_Host_Template driver_template = INI9100U;

#include "scsi_module.c"

#endif

char *i91uCopyright = "Copyright (C) 1996-98";

char *i91uInitioName = "by Initio Corporation";

char *i91uProductName = "INI-9X00U/UW";

char *i91uVersion = "v1.03f";

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

struct proc_dir_entry proc_scsi_ini9100u =

{

        PROC_SCSI_INI9100U, 7, "INI9100U",

        S_IFDIR | S_IRUGO | S_IXUGO, 2,

        0, 0, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL

};

#endif

#define TULSZ(sz)     (sizeof(sz) / sizeof(sz[0]))

#define TUL_RDWORD(x,y)         (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) ))

/* set by i91_setup according to the command line */

static int setup_called = 0;

static int tul_num_ch = 4;      /* Maximum 4 adapters           */

static int tul_num_scb;

static int tul_tag_enable = 1;

static SCB *tul_scb;

#ifdef DEBUG_i91u

static int setup_debug = 0;

#endif

static char *setup_str = (char *) NULL;

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

static void i91u_intr0(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr1(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr2(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr3(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr4(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr5(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr6(int irq, void *dev_id, struct pt_regs *);

static void i91u_intr7(int irq, void *dev_id, struct pt_regs *);

#else

static void i91u_intr0(int irq, struct pt_regs *);

static void i91u_intr1(int irq, struct pt_regs *);

static void i91u_intr2(int irq, struct pt_regs *);

static void i91u_intr3(int irq, struct pt_regs *);

static void i91u_intr4(int irq, struct pt_regs *);

static void i91u_intr5(int irq, struct pt_regs *);

static void i91u_intr6(int irq, struct pt_regs *);

static void i91u_intr7(int irq, struct pt_regs *);

#endif

static void i91u_panic(char *msg);

static void i91uSCBPost(BYTE * pHcb, BYTE * pScb);

                                /* ---- EXTERNAL FUNCTIONS ---- */

                                        /* Get total number of adapters */

extern void init_i91uAdapter_table(void);

extern int Addi91u_into_Adapter_table(WORD, WORD, BYTE, BYTE, BYTE);

extern int tul_ReturnNumberOfAdapters(void);

extern void get_tulipPCIConfig(HCS * pHCB, int iChannel_index);

extern int init_tulip(HCS * pHCB, SCB * pSCB, int tul_num_scb, BYTE * pbBiosAdr, int reset_time);

extern SCB *tul_alloc_scb(HCS * pHCB);

extern int tul_abort_srb(HCS * pHCB, Scsi_Cmnd * pSRB);

extern void tul_exec_scb(HCS * pHCB, SCB * pSCB);

extern void tul_release_scb(HCS * pHCB, SCB * pSCB);

extern void tul_stop_bm(HCS * pHCB);

extern int tul_reset_scsi(HCS * pCurHcb, int seconds);

extern int tul_isr(HCS * pHCB);

extern int tul_reset(HCS * pHCB, Scsi_Cmnd * pSRB, unsigned char target);

extern int tul_reset_scsi_bus(HCS * pCurHcb);

extern int tul_device_reset(HCS * pCurHcb, ULONG pSrb, unsigned int target, unsigned int ResetFlags);

                                /* ---- EXTERNAL VARIABLES ---- */

extern HCS tul_hcs[];

const PCI_ID i91u_pci_devices[] = {

        { INI_VENDOR_ID, I950_DEVICE_ID },

        { INI_VENDOR_ID, I940_DEVICE_ID },

        { INI_VENDOR_ID, I935_DEVICE_ID },

        { INI_VENDOR_ID, I920_DEVICE_ID },

        { DMX_VENDOR_ID, I920_DEVICE_ID },

};

/*

 *  queue services:

 */

/*****************************************************************************

 Function name  : i91uAppendSRBToQueue

 Description    : This function will push current request into save list

 Input          : pSRB  -       Pointer to SCSI request block.

                  pHCB  -       Pointer to host adapter structure

 Output         : None.

 Return         : None.

*****************************************************************************/

static void i91uAppendSRBToQueue(HCS * pHCB, Scsi_Cmnd * pSRB)

{

        ULONG flags;

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)

        spin_lock_irqsave(&(pHCB->pSRB_lock), flags);

#else

        save_flags(flags);

        cli();

#endif

        pSRB->next = NULL;      /* Pointer to next              */

        if (pHCB->pSRB_head == NULL)

                pHCB->pSRB_head = pSRB;

        else

                pHCB->pSRB_tail->next = pSRB;   /* Pointer to next              */

        pHCB->pSRB_tail = pSRB;

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)

        spin_unlock_irqrestore(&(pHCB->pSRB_lock), flags);

#else

        restore_flags(flags);

#endif

        return;

}

/*****************************************************************************

 Function name  : i91uPopSRBFromQueue

 Description    : This function will pop current request from save list

 Input          : pHCB  -       Pointer to host adapter structure

 Output         : None.

 Return         : pSRB  -       Pointer to SCSI request block.

*****************************************************************************/

static Scsi_Cmnd *i91uPopSRBFromQueue(HCS * pHCB)

{

        Scsi_Cmnd *pSRB;

        ULONG flags;

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)

        spin_lock_irqsave(&(pHCB->pSRB_lock), flags);

#else

        save_flags(flags);

        cli();

#endif

        if ((pSRB = pHCB->pSRB_head) != NULL) {

                pHCB->pSRB_head = pHCB->pSRB_head->next;

                pSRB->next = NULL;

        }

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)

        spin_unlock_irqrestore(&(pHCB->pSRB_lock), flags);

#else

        restore_flags(flags);

#endif

        return (pSRB);

}

/* called from init/main.c */

void i91u_setup(char *str, int *ints)

{

        if (setup_called)

                i91u_panic("i91u: i91u_setup called twice.\n");

        setup_called = ints[0];

        setup_str = str;

#ifdef DEBUG_i91u

        setup_debug = ints[0] >= 1 ? ints[1] : DEBUG_DEFAULT;

#endif

}

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,93)

int tul_NewReturnNumberOfAdapters(void)

{

        struct pci_dev *pDev = NULL;    /* Start from none              */

        int iAdapters = 0;

        long dRegValue;

        WORD wBIOS;

        int i = 0;

        init_i91uAdapter_table();

        for (i = 0; i < TULSZ(i91u_pci_devices); i++)

        {

                while ((pDev = pci_find_device(i91u_pci_devices[i].vendor_id, i91u_pci_devices[i].device_id, pDev)) != NULL) {

                        pci_read_config_dword(pDev, 0x44, (u32 *) & dRegValue);

                        wBIOS = (UWORD) (dRegValue & 0xFF);

                        if (((dRegValue & 0xFF00) >> 8) == 0xFF)

                                dRegValue = 0;

                        wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));

                        if (Addi91u_into_Adapter_table(wBIOS,

                                                        (pDev->base_address[0] & 0xFFFE),

                                                        pDev->irq,

                                                        pDev->bus->number,

                                                        (pDev->devfn >> 3)

                                ) == 0)

                                iAdapters++;

                }

        }

        return (iAdapters);

}

#else                           /* <01> */

/*****************************************************************************

 Function name  : tul_ReturnNumberOfAdapters

 Description    : This function will scan PCI bus to get all Orchid card

 Input          : None.

 Output         : None.

 Return         : SUCCESSFUL    - Successful scan

                  ohterwise     - No drives founded

*****************************************************************************/

int tul_ReturnNumberOfAdapters(void)

{

        unsigned int i, iAdapters;

        unsigned int dRegValue;

        unsigned short command;

        WORD wBIOS, wBASE;

        BYTE bPCIBusNum, bInterrupt, bPCIDeviceNum;

        iAdapters = 0;

        /*

         * PCI-bus probe.

         */

        if (pcibios_present()) {

#ifdef MMAPIO

                unsigned long page_offset, base;

#endif

                int index;

                unsigned char pci_bus, pci_devfn;

                bPCIBusNum = 0;

                bPCIDeviceNum = 0;

                init_i91uAdapter_table();

                for (i = 0; i < TULSZ(i91u_pci_devices); i++) {

                        index = 0;

                        while (!(pcibios_find_device(i91u_pci_devices[i].vendor_id,

                                           i91u_pci_devices[i].device_id,

                                         index++, &pci_bus, &pci_devfn)))

                        {

                                if (i == 2) {

                                           printk("i91u: The RAID controller is not supported by\n");

                                           printk("i91u:         this driver, we are ignoring it.\n");

                                } else {

                                        /*

                                         * Read sundry information from PCI BIOS.

                                         */

                                        bPCIBusNum = pci_bus;

                                        bPCIDeviceNum = pci_devfn;

                                        pcibios_read_config_dword(pci_bus, pci_devfn, PCI_BASE_ADDRESS_0,

                                                             &dRegValue);

                                        if (dRegValue == -1) {  /* Check return code            */

                                                printk("\n\ri91u: tulip read configuration error.\n");

                                                return (0);      /* Read configuration space error  */

                                        }

                                        /* <02> read from base address + 0x50 offset to get the wBIOS balue. */

                                        wBASE = (WORD) dRegValue;

                                        /* Now read the interrupt line  */

                                        pcibios_read_config_dword(pci_bus, pci_devfn, PCI_INTERRUPT_LINE,

                                                             &dRegValue);

                                        bInterrupt = dRegValue & 0xFF;  /* Assign interrupt line      */

                                        pcibios_read_config_word(pci_bus, pci_devfn, PCI_COMMAND, &command);

                                        pcibios_write_config_word(pci_bus, pci_devfn, PCI_COMMAND,

                                                                  command | PCI_COMMAND_MASTER | PCI_COMMAND_IO);

                                        wBASE &= PCI_BASE_ADDRESS_IO_MASK;

                                        wBIOS = TUL_RDWORD(wBASE, 0x50);

#ifdef MMAPIO

                                        base = wBASE & PAGE_MASK;

                                        page_offset = wBASE - base;

                                        /*

                                         * replace the next line with this one if you are using 2.1.x:

                                         * temp_p->maddr = ioremap(base, page_offset + 256);

                                         */

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,0)

                                        wBASE = ioremap(base, page_offset + 256);

#else

                                        wBASE = (WORD) vremap(base, page_offset + 256);

#endif

                                        if (wBASE) {

                                                wBASE += page_offset;

                                        }

#endif

                                        if (Addi91u_into_Adapter_table(wBIOS, wBASE, bInterrupt, bPCIBusNum,

                                                   bPCIDeviceNum) == 0x0)

                                                iAdapters++;

                                }

                        }       /* while(pdev=....) */

                }               /* for PCI_DEVICES */

        }                       /* PCI BIOS present */

        return (iAdapters);

}

#endif

int i91u_detect(Scsi_Host_Template * tpnt)

{

        SCB *pSCB;

        HCS *pHCB;

        struct Scsi_Host *hreg;

        unsigned long i;        /* 01/14/98                     */

        int ok = 0, iAdapters;

        ULONG dBiosAdr;

        BYTE *pbBiosAdr;

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

        tpnt->proc_dir = &proc_scsi_ini9100u;

#endif

        if (setup_called) {     /* Setup by i91u_setup          */

                printk("i91u: processing commandline: ");

#ifdef DEBUG_i91u

                if (setup_called > 1) {

                        printk("\ni91u: %s\n", setup_str);

                        printk("i91u: usage: i91u[=<DEBUG>]\n");

                        i91u_panic("i91u panics in line %d", __LINE__);

                }

                i91u_debug = setup_debug;

#endif

        }

        /* Get total number of adapters in the motherboard */

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,93)

#ifdef CONFIG_PCI

        iAdapters = tul_NewReturnNumberOfAdapters();

#else

        iAdapters = tul_ReturnNumberOfAdapters();

#endif

#else

        iAdapters = tul_ReturnNumberOfAdapters();

#endif

        if (iAdapters == 0)      /* If no tulip founded, return */

                return (0);

        tul_num_ch = (iAdapters > tul_num_ch) ? tul_num_ch : iAdapters;

        /* Update actually channel number */

        if (tul_tag_enable) {   /* 1.01i                  */

                tul_num_scb = MAX_TARGETS * i91u_MAXQUEUE;

        } else {

                tul_num_scb = MAX_TARGETS + 3;  /* 1-tape, 1-CD_ROM, 1- extra */

        }                       /* Update actually SCBs per adapter */

        /* Get total memory needed for HCS */

        i = tul_num_ch * sizeof(HCS);

        memset((unsigned char *) &tul_hcs[0], 0, i);      /* Initialize tul_hcs 0 */

        /* Get total memory needed for SCB */

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

        for (; tul_num_scb >= MAX_TARGETS + 3; tul_num_scb--) {

                i = tul_num_ch * tul_num_scb * sizeof(SCB);

                if ((tul_scb = (SCB *) kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)

                        break;

        }

#else

        i = tul_num_ch * tul_num_scb * sizeof(SCB);

        tul_scb = (SCB *) scsi_init_malloc(i, GFP_ATOMIC | GFP_DMA);

#endif

        if (tul_scb == NULL) {

                printk("i91u: SCB memory allocation error\n");

                return (0);

        }

        memset((unsigned char *) tul_scb, 0, i);

        pSCB = tul_scb;

        for (i = 0; i < tul_num_ch * tul_num_scb; i++, pSCB++) {

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

                pSCB->SCB_SGPAddr = (U32) VIRT_TO_BUS(&pSCB->SCB_SGList[0]);

#else

                pSCB->SCB_SGPAddr = (U32) (&pSCB->SCB_SGList[0]);

#endif

        }

        for (i = 0, pHCB = &tul_hcs[0];           /* Get pointer for control block */

             i < tul_num_ch;

             i++, pHCB++) {

                pHCB->pSRB_head = NULL;         /* Initial SRB save queue       */

                pHCB->pSRB_tail = NULL;         /* Initial SRB save queue       */

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(2,1,95)

                pHCB->pSRB_lock = SPIN_LOCK_UNLOCKED;   /* SRB save queue lock */

#endif

                request_region(pHCB->HCS_Base, 0x100, "i91u");  /* Register */

                get_tulipPCIConfig(pHCB, i);

                dBiosAdr = pHCB->HCS_BIOS;

                dBiosAdr = (dBiosAdr << 4);

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

                pbBiosAdr = phys_to_virt(dBiosAdr);

#endif

                init_tulip(pHCB, tul_scb + (i * tul_num_scb), tul_num_scb, pbBiosAdr, 10);

                pHCB->HCS_Index = i;    /* 7/29/98 */

                hreg = scsi_register(tpnt, sizeof(HCS));

                hreg->io_port = pHCB->HCS_Base;

                hreg->n_io_port = 0xff;

                hreg->can_queue = tul_num_scb;  /* 03/05/98                      */

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

                hreg->unique_id = pHCB->HCS_Base;

                hreg->max_id = pHCB->HCS_MaxTar;

#endif

                hreg->max_lun = 32;     /* 10/21/97                     */

                hreg->irq = pHCB->HCS_Intr;

                hreg->this_id = pHCB->HCS_SCSI_ID;      /* Assign HCS index           */

                hreg->base = (UCHAR *) pHCB;

                hreg->sg_tablesize = TOTAL_SG_ENTRY;    /* Maximun support is 32 */

                /* Initial tulip chip           */

                switch (i) {

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

                case 0:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr0, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 1:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr1, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 2:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr2, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 3:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr3, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 4:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr4, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 5:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr5, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 6:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr6, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                case 7:

                        ok = request_irq(pHCB->HCS_Intr, i91u_intr7, SA_INTERRUPT | SA_SHIRQ, "i91u", NULL);

                        break;

                default:

                        i91u_panic("i91u: Too many host adapters\n");

                        break;

                }

                if (ok < 0) {

                        if (ok == -EINVAL) {

                                printk("i91u: bad IRQ %d.\n", pHCB->HCS_Intr);

                                printk("         Contact author.\n");

                        } else if (ok == -EBUSY)

                                printk("i91u: IRQ %d already in use. Configure another.\n",

                                       pHCB->HCS_Intr);

                        else {

                                printk("\ni91u: Unexpected error code on requesting IRQ %d.\n",

                                       pHCB->HCS_Intr);

                                printk("         Contact author.\n");

                        }

                        i91u_panic("i91u: driver needs an IRQ.\n");

                }

#endif

        }

        tpnt->this_id = -1;

        tpnt->can_queue = 1;

        return 1;

}

static void i91uBuildSCB(HCS * pHCB, SCB * pSCB, Scsi_Cmnd * SCpnt)

{                               /* Create corresponding SCB     */

        struct scatterlist *pSrbSG;

        SG *pSG;                /* Pointer to SG list           */

        int i;

        long TotalLen;

        pSCB->SCB_Post = i91uSCBPost;   /* i91u's callback routine      */

        pSCB->SCB_Srb = SCpnt;

        pSCB->SCB_Opcode = ExecSCSI;

        pSCB->SCB_Flags = SCF_POST;     /* After SCSI done, call post routine */

        pSCB->SCB_Target = SCpnt->target;

        pSCB->SCB_Lun = SCpnt->lun;

        pSCB->SCB_Ident = SCpnt->lun | DISC_ALLOW;

        pSCB->SCB_Flags |= SCF_SENSE;   /* Turn on auto request sense   */

#if LINUX_VERSION_CODE >= CVT_LINUX_VERSION(1,3,0)

        pSCB->SCB_SensePtr = (U32) VIRT_TO_BUS(SCpnt->sense_buffer);

#else

        pSCB->SCB_SensePtr = (U32) (SCpnt->sense_buffer);

#endif

        pSCB->SCB_SenseLen = SENSE_SIZE;

        pSCB->SCB_CDBLen = SCpnt->cmd_len;

        pSCB->SCB_HaStat = 0;

        pSCB->SCB_TaStat = 0;

        memcpy(&pSCB->SCB_CDB[0], &SCpnt->cmnd, SCpnt->cmd_len);

        if (SCpnt->device->tagged_supported) {  /* Tag Support                  */

                pSCB->SCB_TagMsg = SIMPLE_QUEUE_TAG;    /* Do simple tag only   */

        } else {

                pSCB->SCB_TagMsg = 0;    /* No tag support               */

        }