URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old

[/] [or1k_old/] [tags/] [start/] [insight/] [itcl/] [iwidgets3.0.0/] [generic/] [tabset.itk] - Blame information for rev 1782

Details | Compare with Previous | View Log

#
# Tabset Widget and the Tab Class
# ----------------------------------------------------------------------
# A Tabset is a widget that contains a set of Tab buttons.
# It displays these tabs in a row or column depending on it tabpos.
# When a tab is clicked on, it becomes the only tab in the tab set that
# is selected. All other tabs are deselected. The Tcl command prefix
# associated with this tab (through the command tab configure option)
# is invoked with the tab index number appended to its argument list.
# This allows the Tabset to control another widget such as a Notebook.
#
# A Tab class is an [incr Tcl] class that displays either an image,
# bitmap, or label in a graphic object on a canvas. This graphic object
# can have a wide variety of appearances depending on the options set.
#
# WISH LIST:
#   This section lists possible future enhancements.
#
#   1) When too many tabs appear, a small scrollbar should appear to
#      move the tabs over.
#
# ----------------------------------------------------------------------
#  AUTHOR: Bill W. Scott                 EMAIL: bscott@spd.dsccc.com
#
#  @(#) $Id: tabset.itk,v 1.1.1.1 2002-01-16 10:24:50 markom Exp $
# ----------------------------------------------------------------------
#            Copyright (c) 1995 DSC Technologies Corporation
# ======================================================================
# Permission to use, copy, modify, distribute and license this software
# and its documentation for any purpose, and without fee or written
# agreement with DSC, is hereby granted, provided that the above copyright
# notice appears in all copies and that both the copyright notice and
# warranty disclaimer below appear in supporting documentation, and that
# the names of DSC Technologies Corporation or DSC Communications
# Corporation not be used in advertising or publicity pertaining to the
# software without specific, written prior permission.
#
# DSC DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
# ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NON-
# INFRINGEMENT. THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, AND THE
# AUTHORS AND DISTRIBUTORS HAVE NO OBLIGATION TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. IN NO EVENT SHALL
# DSC BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
# ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTUOUS ACTION,
# ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
# SOFTWARE.
# ======================================================================
 
#
# Default resources.
#
option add *Tabset.width          0            widgetDefault
option add *Tabset.height         0            widgetDefault
option add *Tabset.equalTabs      true         widgetDefault
option add *Tabset.tabPos         s            widgetDefault
option add *Tabset.raiseSelect    false        widgetDefault
option add *Tabset.start          4            widgetDefault
option add *Tabset.margin         5            widgetDefault
option add *Tabset.tabBorders     true         widgetDefault
option add *Tabset.bevelAmount    0            widgetDefault
option add *Tabset.padX           4            widgetDefault
option add *Tabset.padY           4            widgetDefault
option add *Tabset.gap            overlap      widgetDefault
option add *Tabset.angle          20           widgetDefault
option add *Tabset.font           fixed        widgetDefault
option add *Tabset.state          normal       widgetDefault
option add *Tabset.disabledForeground #a3a3a3  widgetDefault
option add *Tabset.foreground     black        widgetDefault
option add *Tabset.background     #d9d9d9      widgetDefault
option add *Tabset.selectForeground black      widgetDefault
option add *Tabset.selectBackground #ececec    widgetDefault
 
#
# Usual options.
#
itk::usual Tabset {
    keep -backdrop -background -cursor -disabledforeground -font -foreground \
         -selectbackground -selectforeground
}
 
# ------------------------------------------------------------------
#                              TABSET
# ------------------------------------------------------------------
class iwidgets::Tabset {
    inherit itk::Widget
 
    constructor {args} {}
    destructor {}
 
    itk_option define -width width Width  0
    itk_option define -equaltabs equalTabs EqualTabs true
    itk_option define -height height Height  0
    itk_option define -tabpos tabPos TabPos  s
    itk_option define -raiseselect raiseSelect RaiseSelect false
    itk_option define -start start Start 4
    itk_option define -margin margin Margin 5
    itk_option define -tabborders tabBorders TabBorders true
    itk_option define -bevelamount bevelAmount BevelAmount 0
    itk_option define -padx padX PadX 4
    itk_option define -pady padY PadY 4
    itk_option define -gap gap Gap overlap
    itk_option define -angle angle Angle 20
    itk_option define -font font Font fixed
    itk_option define -state state State normal
    itk_option define \
            -disabledforeground disabledForeground DisabledForeground #a3a3a3
    itk_option define -foreground foreground Foreground black
    itk_option define -background background Background #d9d9d9
    itk_option define -selectforeground selectForeground Background black
    itk_option define -backdrop backdrop Backdrop white
    itk_option define -selectbackground selectBackground Foreground #ececec
    itk_option define -command command Command {}
 
    public method configure {args}
    public method add {args}
    public method delete {args}
    public method index {index}
    public method insert {index args}
    public method prev {}
    public method next {}
    public method select {index}
    public method tabcget {index args}
    public method tabconfigure {index args}
 
    protected method _selectName {tabName}
 
    private method _createTab {args}
    private method _deleteTabs {fromTab toTab}
    private method _index {pathList index select}
    private method _tabConfigure {args}
    private method _relayoutTabs {}
    private method _drawBevelBorder {}
    private method _calcNextTabOffset {tabName}
    private method _tabBounds {}
    private method _recalcCanvasGeom {}
    private method _canvasReconfigure {width height}
    private method _startMove {x y}
    private method _moveTabs {x y}
    private method _endMove {x y}
    private method _configRelayout {}
 
    private variable _width 0          ;# Width of the canvas in screen units
    private variable _height 0         ;# Height of the canvas in screen units
    private variable _selectedTop 0    ;# top edge of tab + a margin
    private variable _deselectedTop 0  ;# top edge of tab + a margin&raiseamt
    private variable _selectedLeft 0   ;# left edge of tab + a margin
    private variable _deselectedLeft 0 ;# left edge of tab + a margin&raiseamt
    private variable _tabs {}          ;# our internal list of tabs
    private variable _currTab -1       ;# numerical index # of selected tab
    private variable _uniqueID 0       ;# used to create unique names
    private variable _cmdStr  {}       ;# holds value of itk_option(-command)
    ;# do not know why I need this!
    private variable _canvasWidth 0    ;# set by canvasReconfigure, is can wid
    private variable _canvasHeight 0   ;# set by canvasReconfigure, is can hgt
 
    private variable _anchorX 0        ;# used by mouse scrolling methods
    private variable _anchorY 0        ;# used by mouse scrolling methods
 
    private variable _margin 0         ;# -margin in screen units
    private variable _start  0         ;# -start in screen units
    private variable _gap overlap      ;# -gap in screen units
 
    private variable _relayout false   ;# flag tripped to tell whether to
                                       ;# relayout tabs after the configure
    private variable _skipRelayout false ;# flag that tells whether to skip
                                       ;# relayouting out the tabs. used by
                                       ;# _endMove.
}
 
#
# Provide a lowercase access method for the Tabset class
#
proc ::iwidgets::tabset {pathName args} {
    uplevel ::iwidgets::Tabset $pathName $args
}
 
# ----------------------------------------------------------------------
#                              CONSTRUCTOR
# ----------------------------------------------------------------------
body iwidgets::Tabset::constructor {args} {
    global tcl_platform
 
    #
    # Create the canvas that holds the tabs
    #
    itk_component add canvas {
        canvas $itk_interior.canvas -highlightthickness 0
    } {
        keep -cursor -width -height
    }
    pack $itk_component(canvas) -fill both -expand yes -anchor nw
 
    # ... This gives us a chance to redraw our bevel borders, etc when
    # the size of our canvas changes...
    bind $itk_component(canvas)  \
            [code $this _canvasReconfigure %w %h]
 
    # ... Allow button 2 scrolling as in label widget.
    if {$tcl_platform(os) != "HP-UX"} {
        bind $itk_component(canvas) <2>               \
            [code $this _startMove %x %y]
        bind $itk_component(canvas)        \
            [code $this _moveTabs %x %y]
        bind $itk_component(canvas)  \
            [code $this _endMove %x %y]
    }
 
    # @@@
    # @@@ Is there a better way?
    # @@@
    bind $itk_component(hull)  "focus $itk_component(hull)"
    bind $itk_component(hull)  [code $this next]
    bind $itk_component(hull)  [code $this prev]
 
    eval itk_initialize $args
 
    _configRelayout
 
    _recalcCanvasGeom
 
}
 
body iwidgets::Tabset::destructor {} {
    foreach tab $_tabs {
        itcl::delete object $tab
    }
}
 
# ----------------------------------------------------------------------
#                              OPTIONS
# ----------------------------------------------------------------------
 
# ----------------------------------------------------------------------
# OPTION -width
#
# Sets the width explicitly for the canvas of the tabset
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::width {
    if {$itk_option(-width) != {}} {
    }
    set _width [winfo pixels $itk_interior $itk_option(-width)]
}
 
# ----------------------------------------------------------------------
# OPTION -equaltabs
#
# If set to true, causes horizontal tabs to be equal in
# in width and vertical tabs to equal in height.
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::equaltabs {
    if {$itk_option(-equaltabs) != {}} {
        set _relayout true
    }
}
 
# ----------------------------------------------------------------------
# OPTION -height
#
# Sets the height explicitly for the canvas of the tabset
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::height {
    set _height [winfo pixels $itk_interior $itk_option(-height)]
}
 
# ----------------------------------------------------------------------
# OPTION -tabpos
#
# Sets the tab position of tabs, n, s, e, w
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::tabpos {
    if {$itk_option(-tabpos) != {}} {
        switch $itk_option(-tabpos) {
            n {
                _tabConfigure -invert true -orient horizontal
            }
            s {
                _tabConfigure -invert false -orient horizontal
            }
            w {
                _tabConfigure -invert false -orient vertical
            }
            e {
                _tabConfigure -invert true -orient vertical
            }
            default {
                error "bad anchor position\
                        \"$itk_option(-tabpos)\" must be n, s, e, or w"
            }
        }
    }
}
 
# ----------------------------------------------------------------------
# OPTION -raiseselect
#
# Sets whether to raise selected tabs slightly
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::raiseselect {
    if {$itk_option(-raiseselect) != {}} {
        set _relayout true
    }
}
 
# ----------------------------------------------------------------------
# OPTION -start
#
# Sets the offset to start of tab set
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::start {
    if {$itk_option(-start) != {}} {
        set _start [winfo pixels $itk_interior $itk_option(-start)]
        set _relayout true
    } else {
        set _start 4
    }
}
 
# ----------------------------------------------------------------------
# OPTION -margin
#
# Sets the margin used above n tabs, below s tabs, left of e
# tabs, right of w tabs
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::margin {
    if {$itk_option(-margin) != {}} {
        set _margin [winfo pixels $itk_interior $itk_option(-margin)]
        set _relayout true
    } else {
        set _margin 5
    }
}
 
# ----------------------------------------------------------------------
# OPTION -tabborders
#
# Boolean that specifies whether to draw the borders of
# the unselected tabs (tabs in background)
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::tabborders {
    if {$itk_option(-tabborders) != {}} {
        _tabConfigure -tabborders $itk_option(-tabborders)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -bevelamount
#
# Specifies pixel size of tab corners. 0 means no corners.
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::bevelamount {
    if {$itk_option(-bevelamount) != {}} {
        _tabConfigure -bevelamount $itk_option(-bevelamount)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -padx
#
# Sets the padding in each tab to the left and right of label
# I don't convert for fpixels, since Tab does it for me.
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::padx {
    if {$itk_option(-padx) != {}} {
        _tabConfigure -padx $itk_option(-padx)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -pady
#
# Sets the padding in each tab to the left and right of label
# I don't convert for fpixels, since Tab does it for me.
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::pady {
    if {$itk_option(-pady) != {}} {
        _tabConfigure -pady $itk_option(-pady)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -gap
#
# Sets the amount of spacing between tabs in pixels
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::gap {
    if {$itk_option(-gap) != {}} {
        if {$itk_option(-gap) != "overlap"} {
            set _gap [winfo pixels $itk_interior $itk_option(-gap)]
        } else {
            set _gap overlap
        }
        set _relayout true
    } else {
        set _gap overlap
    }
}
 
# ----------------------------------------------------------------------
# OPTION -angle
#
# Sets the angle of the tab's sides
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::angle {
    if {$itk_option(-angle) != {}} {
        _tabConfigure -angle $itk_option(-angle)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -font
#
# Sets the font of the tab (SELECTED and UNSELECTED)
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::font {
    if {$itk_option(-font) != {}} {
        _tabConfigure -font $itk_option(-font)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -state
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::state {
    if {$itk_option(-state) != {}} {
        _tabConfigure -state $itk_option(-state)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -disabledforeground
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::disabledforeground {
    if {$itk_option(-disabledforeground) != {}} {
        _tabConfigure \
                -disabledforeground $itk_option(-disabledforeground)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -foreground
#
# Sets the foreground label color of UNSELECTED tabs
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::foreground {
    _tabConfigure -foreground $itk_option(-foreground)
}
 
# ----------------------------------------------------------------------
# OPTION -background
#
# Sets the background color of UNSELECTED tabs
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::background {
    if {$itk_option(-background) != {}} {
        _tabConfigure -background $itk_option(-background)
    } else {
        _tabConfigure -background \
                [$itk_component(canvas) cget -background]
    }
}
 
# ----------------------------------------------------------------------
# OPTION -selectforeground
#
# Sets the foreground label color of SELECTED tabs
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::selectforeground {
    _tabConfigure -selectforeground $itk_option(-selectforeground)
}
 
# ----------------------------------------------------------------------
# OPTION -backdrop
#
# Sets the background color of the Tabset backdrop (behind the tabs)
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::backdrop {
    if {$itk_option(-backdrop) != {}} {
        $itk_component(canvas) configure \
                -background $itk_option(-backdrop)
    }
}
 
# ----------------------------------------------------------------------
# OPTION -selectbackground
#
# Sets the background color of SELECTED tabs
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::selectbackground {
    if {$itk_option(-selectbackground) != {}} {
    } else {
        #set _selectBackground \
                [$itk_component(canvas) cget -background]
    }
    _tabConfigure -selectbackground $itk_option(-selectbackground)
}
 
# ----------------------------------------------------------------------
# OPTION -command
#
# The command to invoke when a tab is hit.
# ----------------------------------------------------------------------
configbody iwidgets::Tabset::command {
    if {$itk_option(-command) != {}} {
        set _cmdStr $itk_option(-command)
    }
}
 
# ----------------------------------------------------------------------
# METHOD: add ?option value...?
#
# Creates a tab and appends it to the list of tabs.
# processes tabconfigure for the tab added.
# ----------------------------------------------------------------------
body iwidgets::Tabset::add {args} {
    set tabName [eval _createTab $args]
    lappend _tabs $tabName
 
    _relayoutTabs
 
    return $tabName
}
 
# ----------------------------------------------------------------------
# METHOD: configure ?option? ?value option value...?
#
# Acts as an addendum to the itk::Widget::configure method.
#
# Checks the _relayout flag to see if after configures are done
# we need to relayout the tabs.
#
# _skipRelayout is set in the MB2 scroll methods, to avoid constant
# relayout of tabs while dragging the mouse.
# ----------------------------------------------------------------------
body iwidgets::Tabset::configure {args} {
    set result [eval itk::Archetype::configure $args]
 
    _configRelayout
 
    return $result
}
 
body iwidgets::Tabset::_configRelayout {} {
    # then relayout tabs if necessary
    if { $_relayout } {
        if { $_skipRelayout } {
        } else {
            _relayoutTabs
        }
        set _relayout false
    }
}
 
# ----------------------------------------------------------------------
# METHOD: delete index1 ?index2?
#
# Deletes a tab or range of tabs from the tabset
# ----------------------------------------------------------------------
body iwidgets::Tabset::delete {args} {
    if { $_tabs == {} } {
        error "can't delete tabs,\
                no tabs in the tabset named $itk_component(hull)"
    }
 
    set len [llength $args]
    switch $len {
 
            error "wrong # args: should be\
                    \"$itk_component(hull) delete index1 ?index2?\""
        }
 
        1 {
            set fromTab [index [lindex $args 0]]
            if { $fromTab == -1 } {
                error "bad value for index1:\
                        [lindex $args 0] in call to delete"
            }
            set toTab $fromTab
            _deleteTabs $fromTab $toTab
        }
 
        2 {
            set fromTab [index [lindex $args 0]]
            if { $fromTab == -1 } {
                error "bad value for index1:\
                        [lindex $args 0] in call to delete"
            }
            set toTab [index [lindex $args 1]]
 
            if { $toTab == -1 } {
                error "bad value for index2:\
                        [lindex $args 1] in call to delete"
            }
            _deleteTabs $fromTab $toTab
        }
 
        default {
            error "wrong # args: should be\
                    \"$itk_component(hull) delete index1 ?index2?\""
        }
    }
}
 
# ----------------------------------------------------------------------
# METHOD: index index
#
# Given an index identifier returns the numeric index of the tab
# ----------------------------------------------------------------------
body iwidgets::Tabset::index {index} {
    return [_index $_tabs $index $_currTab]
}
 
# ----------------------------------------------------------------------
# METHOD: insert index ?option value...?
#
# Inserts a tab before a index. The before tab may
# be specified as a label or a tab position.
# ----------------------------------------------------------------------
body iwidgets::Tabset::insert {index args} {
    if { $_tabs == {} } {
        error "no tab to insert before,\
                tabset '$itk_component(hull)' is empty"
    }
 
    # get the tab
    set tab [index $index]
 
    # catch bad value for before tab.
    if { $tab < 0 || $tab >= [llength $_tabs] } {
        error "bad value $tab for index:\
                should be between 0 and [expr [llength $_tabs] - 1]"
    }
 
    # create the new tab and get its name...
    set tabName [eval _createTab $args]
 
    # grab the name of the tab currently selected. (to keep in sync)
    set currTabName [lindex $_tabs $_currTab]
 
    # insert tabName before $tab
    set _tabs [linsert $_tabs $tab $tabName]
 
    # keep the _currTab in sync with the insert.
    set _currTab [lsearch -exact $_tabs $currTabName]
 
    _relayoutTabs
 
    return $tabName
}
 
# ----------------------------------------------------------------------
# METHOD: prev
#
# Selects the prev tab. Wraps at first back to last tab.
# ----------------------------------------------------------------------
body iwidgets::Tabset::prev {} {
    if { $_tabs == {} } {
        error "can't goto previous tab,\
                no tabs in the tabset: $itk_component(hull)"
    }
 
    # bump to the previous tab and wrap if necessary
    set prev [expr $_currTab - 1]
    if { $prev < 0 } {
        set prev [expr [llength $_tabs] - 1]
    }
 
    select $prev
 
}
 
# ----------------------------------------------------------------------
# METHOD: next
#
# Selects the next tab. Wraps at last back to first tab.
# ----------------------------------------------------------------------
body iwidgets::Tabset::next {} {
    if { $_tabs == {} } {
        error "can't goto next tab,\
                no tabs in the tabset: $itk_component(hull)"
    }
 
    # bump to the next tab and wrap if necessary
    set next [expr $_currTab + 1]
    if { $next >= [llength $_tabs] } {
        set next 0
    }
 
    select $next
}
 
# ----------------------------------------------------------------------
# METHOD: select index
#
# Select a tab by index
#
# Lowers the last _currTab if it existed.
# Then raises the new one if it exists.
#
# Returns numeric index of selection, -1 if failed.
# -------------------------------------------------------------
body iwidgets::Tabset::select {index} {
    if { $_tabs == {} } {
        error "can't activate a tab,\
                no tabs in the tabset: $itk_component(hull)"
    }
 
    # if there is not current selection just ignore trying this selection
    if { $index == "select" && $_currTab == -1 } {
        return -1
    }
 
    # is selection request in range ?
    set reqTab [index $index]
    if { $reqTab == -1 } {
        error "bad value $index for index:\
                should be from 0 to [expr [llength $_tabs] - 1]"
    }
 
    # If already selected then ignore and return...
    if { $reqTab == $_currTab } {
        return $reqTab
    }
 
    # ---- Deselect
    if { $_currTab != -1 } {
        set currTabName [lindex $_tabs $_currTab]
        $currTabName deselect
 
        # handle different orientations...
        if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s"} {
            $currTabName configure -top $_deselectedTop
        } else {
            $currTabName configure -left $_deselectedLeft
        }
    }
 
    # get the stacking order correct...
    foreach tab $_tabs {
        $tab lower
    }
 
    # set this now so that the -command cmd can do an 'index select'
    # to operate on this tab.
    set _currTab $reqTab
 
    # ---- Select
    set reqTabName [lindex $_tabs $reqTab]
    $reqTabName select
    if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s"} {
        $reqTabName configure -top $_selectedTop
    } else {
        $reqTabName configure -left $_selectedLeft
    }
 
    set _currTab $reqTab
 
    # invoke any user command string, appended with tab index number
    if { $_cmdStr != {} } {
        set newCmd $_cmdStr
        eval [lappend newCmd $reqTab]
    }
 
    return $reqTab
}
 
# ----------------------------------------------------------------------
# METHOD: tabcget index ?option?
#
# Returns the value for the option setting of the tab at index $index.
# ----------------------------------------------------------------------
body iwidgets::Tabset::tabcget {index args} {
    return [lindex [eval tabconfigure $index $args] 2]
}
 
# ----------------------------------------------------------------------
# METHOD: tabconfigure index ?option? ?value option value?
#
# tabconfigure index : returns configuration list
# tabconfigure index -option : returns option values
# tabconfigure index ?option value option value ...? sets options
#   and returns empty string.
#
# Performs configure on a given tab denoted by index.
#
# Index may be a tab number or a pattern matching the label
# associated with a tab.
# ----------------------------------------------------------------------
body iwidgets::Tabset::tabconfigure {index args} {
    # convert index to numeric
    set tab [index $index]
 
    if { $tab == -1 } {
        error "bad index value:\
                $index for $itk_component(hull) tabconfigure"
    }
 
    set tabName [lindex $_tabs $tab]
 
    set len [llength $args]
    switch $len {
 
            return [eval $tabName configure]
        }
        1 {
            return [eval $tabName configure $args]
        }
        default {
            eval $tabName configure $args
            _relayoutTabs
            select select
        }
    }
    return ""
}
 
# ----------------------------------------------------------------------
# PROTECTED METHOD: _selectName
#
# internal method to allow selection by internal tab name
# rather than index. This is used by the bind methods
# ----------------------------------------------------------------------
body iwidgets::Tabset::_selectName {tabName} {
    # if the tab is disabled, then ignore this selection...
    if { [$tabName cget -state] == "disabled" } {
        return
    }
 
    set tab [lsearch -exact $_tabs $tabName]
    select $tab
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _createTab
#
# Creates a tab, using unique tab naming, propagates background
# and keeps unique id up to date.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_createTab {args} {
    #
    # create an internal name for the tab: tab0, tab1, etc.
    # these are one-up numbers they do not
    # correspond to the position the tab is located in.
    #
    set tabName $this-tab$_uniqueID
 
    switch $itk_option(-tabpos) {
        n {
            set invert true
            set orient horizontal
            set x 0
            set y [expr $_margin + 1]
        }
        s {
            set invert false
            set orient horizontal
            set x 0
            set y 0
        }
        w {
            set invert false
            set orient vertical
            set x 0
            set y 0
        }
        e {
            set invert true
            set orient vertical
            set x [expr $_margin + 1]
            set y 0
        }
        default {
            error "bad anchor position\
                    \"$itk_option(-tabpos)\" must be n, s, e, or w"
        }
    }
 
    eval iwidgets::Tab $tabName $itk_component(canvas) \
            -left             $x \
            -top              $y \
            -font             [list $itk_option(-font)] \
            -background       $itk_option(-background) \
            -foreground       $itk_option(-foreground) \
            -selectforeground $itk_option(-selectforeground) \
            -disabledforeground $itk_option(-disabledforeground) \
            -selectbackground $itk_option(-selectbackground) \
            -angle            $itk_option(-angle) \
            -padx             $itk_option(-padx) \
            -pady             $itk_option(-pady) \
            -bevelamount      $itk_option(-bevelamount) \
            -state            $itk_option(-state) \
            -tabborders       $itk_option(-tabborders) \
            -invert           $invert \
            -orient           $orient \
            $args
 
    $tabName lower
 
    $itk_component(canvas) \
            bind $tabName  [code $this _selectName $tabName]
 
    incr _uniqueID
 
    return $tabName
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _deleteTabs
#
# Deletes tabs from $fromTab to $toTab.
#
# Operates in two passes, destroys all the widgets
# Then removes the pathName from the tab list
#
# Also keeps the current selection in bounds.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_deleteTabs {fromTab toTab} {
    for { set tab $fromTab } { $tab <= $toTab } { incr tab } {
        set tabName [lindex $_tabs $tab]
 
        # unbind Button-1 from this window name
        $itk_component(canvas) bind $tabName  {}
 
        # Destroy the Tab class...
        itcl::delete object $tabName
    }
 
    # physically remove the tab
    set _tabs [lreplace $_tabs $fromTab $toTab]
 
    # If we deleted a selected tab set our selection to none
    if { $_currTab >= $fromTab && $_currTab <= $toTab } {
        set _currTab -1
        _drawBevelBorder
    }
 
    # make sure _currTab stays in sync with new numbering...
    if { $_tabs == {} } {
        # if deleted only remaining tab,
        # reset current tab to undefined
        set _currTab -1
 
        # or if the current tab was the last tab, it needs come back
    } elseif { $_currTab >= [llength $_tabs] } {
        incr _currTab -1
        if { $_currTab < 0 } {
            # but only to zero
            set _currTab 0
        }
    }
 
    _relayoutTabs
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _index
#
# pathList : list of path names to search thru if index is a label
# index    : either number, 'select', 'end', or pattern
# select   : current selection
#
# _index takes takes the value $index converts it to
# a numeric identifier. If the value is not already
# an integer it looks it up in the $pathList array.
# If it fails it returns -1
# ----------------------------------------------------------------------
body iwidgets::Tabset::_index {pathList index select} {
    switch $index {
        select {
            set number $select
        }
        end {
            set number [expr [llength $pathList] -1]
        }
        default {
            # is it an number already?
            if { [regexp {^[0-9]+$} $index] } {
                set number $index
                if { $number < 0 || $number >= [llength $pathList] } {
                    set number -1
                }
 
                # otherwise it is a label
            } else {
                # look thru the pathList of pathNames and
                # get each label and compare with index.
                # if we get a match then set number to postion in $pathList
                # and break out.
                # otherwise number is still -1
                set i 0
                set number -1
                foreach pathName $pathList {
                    set label [$pathName cget -label]
                    if { $label == $index } {
                        set number $i
                        break
                    }
                    incr i
                }
            }
        }
    }
 
    return $number
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _tabConfigure
# ----------------------------------------------------------------------
body iwidgets::Tabset::_tabConfigure {args} {
    foreach tab $_tabs {
        eval $tab configure $args
    }
 
    set _relayout true
 
    if { $_tabs != {} } {
        select select
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _relayoutTabs
#
# relays out the tabs with correct spacing...
# ----------------------------------------------------------------------
body iwidgets::Tabset::_relayoutTabs {} {
    if { [llength $_tabs] == 0 } {
        return
    }
 
    # get the max width for fixed width tabs...
    set maxWidth 0
    foreach tab $_tabs {
        set width [$tab labelwidth]
        if { $width > $maxWidth } {
            set maxWidth $width
        }
    }
 
    # get the max height for fixed height tabs...
    set maxHeight 0
    foreach tab $_tabs {
        set height [$tab labelheight]
        if { $height > $maxHeight } {
            set maxHeight $height
        }
    }
 
    # get curr tab's name
    set currTabName [lindex $_tabs $_currTab]
 
    # Start with our margin offset in pixels...
    set tabStart $_start
 
    if { $itk_option(-raiseselect) } {
        set raiseAmt 2
    } else {
        set raiseAmt 0
    }
 
    #
    # Depending on the tab layout: n, s, e, or w place the tabs
    # according to orientation, raise, margins, etc.
    #
    switch $itk_option(-tabpos) {
        n {
            set _selectedTop [expr $_margin + 1]
            set _deselectedTop [expr $_selectedTop + $raiseAmt]
 
            if { $itk_option(-equaltabs) } {
                set tabWidth $maxWidth
            } else {
                set tabWidth 0
            }
 
            foreach tab $_tabs {
                if { $tab == $currTabName } {
                    $tab configure -left $tabStart -top $_selectedTop \
                            -height $maxHeight -width $tabWidth -anchor c
                } else {
                    $tab configure -left $tabStart -top $_deselectedTop \
                            -height $maxHeight -width $tabWidth -anchor c
                }
                set tabStart [expr $tabStart + [_calcNextTabOffset $tab]]
            }
 
        }
        s {
            set _selectedTop 0
            set _deselectedTop [expr $_selectedTop - $raiseAmt]
 
            if { $itk_option(-equaltabs) } {
                set tabWidth $maxWidth
            } else {
                set tabWidth 0
            }
 
            foreach tab $_tabs {
                if { $tab == $currTabName } {
                    $tab configure -left $tabStart -top $_selectedTop \
                            -height $maxHeight -width $tabWidth -anchor c
                } else {
                    $tab configure -left $tabStart -top $_deselectedTop \
                            -height $maxHeight -width $tabWidth -anchor c
                }
                set tabStart [expr $tabStart + [_calcNextTabOffset $tab]]
            }
 
        }
        w {
            set _selectedLeft [expr $_margin + 1]
            set _deselectedLeft [expr $_selectedLeft + $raiseAmt]
 
            if { $itk_option(-equaltabs) } {
                set tabHeight $maxHeight
            } else {
                set tabHeight 0
            }
 
            foreach tab $_tabs {
                # selected
                if { $tab == $currTabName } {
                    $tab configure -top $tabStart -left $_selectedLeft \
                            -height $tabHeight -width $maxWidth -anchor e
                    # deselected
                } else {
                    $tab configure -top $tabStart -left $_deselectedLeft \
                            -height $tabHeight -width $maxWidth -anchor e
                }
                set tabStart [expr $tabStart + [_calcNextTabOffset $tab]]
            }
 
        }
        e {
            set _selectedLeft 0
            set _deselectedLeft [expr $_selectedLeft - $raiseAmt]
 
            if { $itk_option(-equaltabs) } {
                set tabHeight $maxHeight
            } else {
                set tabHeight 0
            }
 
            foreach tab $_tabs {
                # selected
                if { $tab == $currTabName } {
                    $tab configure -top $tabStart -left $_selectedLeft \
                            -height $tabHeight -width $maxWidth -anchor w
                    # deselected
                } else {
                    $tab configure -top $tabStart -left $_deselectedLeft \
                            -height $tabHeight -width $maxWidth -anchor w
                }
                set tabStart [expr $tabStart + [_calcNextTabOffset $tab]]
            }
 
        }
        default {
            error "bad anchor position\
                    \"$itk_option(-tabpos)\" must be n, s, e, or w"
        }
    }
 
    # put border on & calc our new canvas size...
    _drawBevelBorder
    _recalcCanvasGeom
 
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _drawBevelBorder
#
# draws the bevel border along tab edge (below selected tab)
# ----------------------------------------------------------------------
body iwidgets::Tabset::_drawBevelBorder {} {
    $itk_component(canvas) delete bevelBorder
 
    switch $itk_option(-tabpos) {
        n {
            $itk_component(canvas) create line \
 
                    $_canvasWidth [expr $_canvasHeight - 1] \
                    -fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
                    -tags bevelBorder
            $itk_component(canvas) create line \
 
                    $_canvasWidth $_canvasHeight \
                    -fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
                    -tags bevelBorder
        }
        s {
            $itk_component(canvas) create line \
 
                    $_canvasWidth 0 \
                    -fill [iwidgets::colors::bottomShadow $itk_option(-selectbackground)] \
                    -tags bevelBorder
            $itk_component(canvas) create line \
 
                    $_canvasWidth 1 \
                    -fill black \
                    -tags bevelBorder
        }
        w {
            $itk_component(canvas) create line \
                    $_canvasWidth 0 \
                    $_canvasWidth [expr $_canvasHeight - 1] \
                    -fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
                    -tags bevelBorder
            $itk_component(canvas) create line \
                    [expr $_canvasWidth - 1] 0 \
                    [expr $_canvasWidth - 1] [expr $_canvasHeight - 1] \
                    -fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
                    -tags bevelBorder
 
        }
        e {
            $itk_component(canvas) create line \
 
 
                    -fill black \
                    -tags bevelBorder
            $itk_component(canvas) create line \
                    1 0 \
                    1 [expr $_canvasHeight - 1] \
                    -fill [iwidgets::colors::bottomShadow $itk_option(-selectbackground)] \
                    -tags bevelBorder
 
        }
    }
 
    $itk_component(canvas) raise bevelBorder
    if { $_currTab != -1 } {
        set currTabName [lindex $_tabs $_currTab]
        $currTabName raise
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _calcNextTabOffset
#
# given $tabName, determines the offset in pixels to place
# the next tab's start edge at.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_calcNextTabOffset {tabName} {
    if { $_gap == "overlap" } {
        return [$tabName offset]
    } else {
        return [expr [$tabName majordim] + $_gap]
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _tabBounds
#
# calculates the bounding box that will completely enclose
# all the tabs.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_tabBounds {} {
    set bbox { 100000 100000 -10000 -10000 }
    foreach tab $_tabs {
        set tabBBox [$tab bbox]
        # if this left is less use it
        if { [lindex $tabBBox 0] < [lindex $bbox 0] } {
            set bbox [lreplace $bbox 0 0 [lindex $tabBBox 0]]
        }
        # if this top is greater use it
        if { [lindex $tabBBox 1] < [lindex $bbox 1] } {
            set bbox [lreplace $bbox 1 1 [lindex $tabBBox 1]]
        }
        # if this right is less use it
        if { [lindex $tabBBox 2] > [lindex $bbox 2] } {
            set bbox [lreplace $bbox 2 2 [lindex $tabBBox 2]]
        }
        # if this bottom is greater use it
        if { [lindex $tabBBox 3] > [lindex $bbox 3] } {
            set bbox [lreplace $bbox 3 3 [lindex $tabBBox 3]]
        }
 
    }
    return $bbox
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _recalcCanvasGeom
#
# Based on size of tabs, recalculates the canvas geometry that
# will hold the tabs.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_recalcCanvasGeom {} {
    if { [llength $_tabs] == 0 } {
        return
    }
 
    set bbox [_tabBounds]
 
    set width [lindex [_tabBounds] 2]
    set height [lindex [_tabBounds] 3]
 
    # now we have the dimensions of all the tabs in the canvas.
 
 
    switch $itk_option(-tabpos) {
        n {
            # height already includes margin
            $itk_component(canvas) configure \
                    -width $width \
                    -height $height
        }
        s {
            $itk_component(canvas) configure \
                    -width $width \
                    -height [expr $height + $_margin]
        }
        w {
            # width already includes margin
            $itk_component(canvas) configure \
                    -width $width \
                    -height [expr $height + 1]
        }
        e {
            $itk_component(canvas) configure \
                    -width [expr $width + $_margin] \
                    -height [expr $height + 1]
        }
        default {
        }
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _canvasReconfigure
#
# Bound to the reconfigure notify event of a canvas, this
# method resets canvas's correct width (since we are fill x)
# and redraws the beveled edge border.
# will hold the tabs.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_canvasReconfigure {width height} {
    set _canvasWidth $width
    set _canvasHeight $height
 
    if { [llength $_tabs] > 0 } {
        _drawBevelBorder
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _startMove
#
# This method is bound to the MB2 down in the canvas area of the
# tab set. This starts animated scrolling of the tabs along their
# major axis.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_startMove {x y} {
    if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s" } {
        set _anchorX $x
    } else {
        set _anchorY $y
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _moveTabs
#
# This method is bound to the MB2 motion in the canvas area of the
# tab set. This causes the tabset to move with the mouse.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_moveTabs {x y} {
    if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s" } {
        set startX [expr $_start + $x - $_anchorX]
        foreach tab $_tabs {
            $tab configure -left $startX
            set startX [expr $startX + [_calcNextTabOffset $tab]]
        }
    } else {
        set startY [expr $_start + $y - $_anchorY]
        foreach tab $_tabs {
            $tab configure -top $startY
            set startY [expr $startY + [_calcNextTabOffset $tab]]
        }
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _endMove
#
# This method is bound to the MB2 release in the canvas area of the
# tab set. This causes the tabset to end moving tabs.
# ----------------------------------------------------------------------
body iwidgets::Tabset::_endMove {x y} {
    if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s" } {
        set startX [expr $_start + $x - $_anchorX]
        set _skipRelayout true
        configure -start $startX
        set _skipRelayout false
    } else {
        set startY [expr $_start + $y - $_anchorY]
        set _skipRelayout true
        configure -start $startY
        set _skipRelayout false
    }
}
 
 
#==============================================================
# CLASS: Tab
#==============================================================
 
class iwidgets::Tab {
    constructor {args} {}
 
    destructor {}
 
    public variable bevelamount 0 {}
    public variable state normal {}
    public variable height 0 {}
    public variable width 0 {}
    public variable anchor c {}
    public variable left 0 {}
    public variable top 0 {}
    public variable image {} {}
    public variable bitmap {} {}
    public variable label {} {}
    public variable padx 4 {}
    public variable pady 4 {}
    public variable selectbackground "gray70" {}
    public variable selectforeground "black" {}
    public variable disabledforeground "gray" {}
    public variable background "white" {}
    public variable foreground "black" {}
    public variable orient vertical {}
    public variable invert false {}
    public variable angle 20 {}
    public variable font \
           "-adobe-helvetica-bold-r-normal--34-240-100-100-p-182-iso8859-1" {}
    public variable tabborders true {}
 
    public method configure {args}
    public method bbox  {}
    public method deselect {}
    public method lower {}
    public method majordim  {}
    public method minordim  {}
    public method offset  {}
    public method raise {}
    public method select {}
    public method labelheight {}
    public method labelwidth {}
 
    private method _makeTab {}
    private method _createLabel {canvas tagList}
    private method _makeEastTab {canvas}
    private method _makeWestTab {canvas}
    private method _makeNorthTab {canvas}
    private method _makeSouthTab {canvas}
    private method _calcLabelDim {labelItem}
    private method _itk_config  {args} @itcl-builtin-configure
    private method _selectNoRaise {}
    private method _deselectNoLower {}
 
    private variable   _selected false
    private variable   _padX 0
    private variable   _padY 0
 
    private variable   _canvas
 
    # these are in pixels
    private variable   _left 0
    private variable   _width 0
    private variable   _height 0
    private variable   _oldLeft 0
    private variable   _top 0
    private variable   _oldTop 0
 
    private variable   _right
    private variable   _bottom
 
    private variable   _offset
    private variable   _majorDim
    private variable   _minorDim
 
    private variable   _darkShadow
    private variable   _lightShadow
 
    #
    # graphic components that make up a tab
    #
    private variable   _gRegion
    private variable   _gLabel
    private variable   _gLightOutline {}
    private variable   _gBlackOutline {}
    private variable   _gTopLine
    private variable   _gTopLineShadow
    private variable   _gLightShadow
    private variable   _gDarkShadow
 
    private variable   _labelWidth 0
    private variable   _labelHeight 0
 
    private variable   _labelXOrigin 0
    private variable   _labelYOrigin 0
 
    private variable   _just left
 
    private variable   _configTripped true
 
    common _tan
 
    set _tan(0)  0.0
    set _tan(1)  0.0175
    set _tan(2)  0.0349
    set _tan(3)  0.0524
    set _tan(4)  0.0699
    set _tan(5)  0.0875
    set _tan(6)  0.1051
    set _tan(7)  0.1228
    set _tan(8)  0.1405
    set _tan(9)  0.1584
    set _tan(10) 0.1763
    set _tan(11) 0.1944
    set _tan(12) 0.2126
    set _tan(13) 0.2309
    set _tan(14) 0.2493
    set _tan(15) 0.2679
    set _tan(16) 0.2867
    set _tan(17) 0.3057
    set _tan(18) 0.3249
    set _tan(19) 0.3443
    set _tan(20) 0.3640
    set _tan(21) 0.3839
    set _tan(22) 0.4040
    set _tan(23) 0.4245
    set _tan(24) 0.4452
    set _tan(25) 0.4663
    set _tan(26) 0.4877
    set _tan(27) 0.5095
    set _tan(28) 0.5317
    set _tan(29) 0.5543
    set _tan(30) 0.5774
    set _tan(31) 0.6009
    set _tan(32) 0.6294
    set _tan(33) 0.6494
    set _tan(34) 0.6745
    set _tan(35) 0.7002
    set _tan(36) 0.7265
    set _tan(37) 0.7536
    set _tan(38) 0.7813
    set _tan(39) 0.8098
    set _tan(40) 0.8391
    set _tan(41) 0.8693
    set _tan(42) 0.9004
    set _tan(43) 0.9325
    set _tan(44) 0.9657
    set _tan(45) 1.0
}
 
# ----------------------------------------------------------------------
#                              CONSTRUCTOR
# ----------------------------------------------------------------------
body iwidgets::Tab::constructor {args} {
 
    set _canvas [lindex $args 0]
    set args [lrange $args 1 [llength $args]]
 
    set _darkShadow  [iwidgets::colors::bottomShadow $selectbackground]
    set _lightShadow [iwidgets::colors::topShadow $selectbackground]
 
    if { $args != "" } {
        eval configure $args
    }
}
 
# ----------------------------------------------------------------------
#                              DESTRUCTOR
# ----------------------------------------------------------------------
body iwidgets::Tab::destructor {} {
    if { [winfo exists $_canvas] } {
        $_canvas delete $this
    }
}
 
# ----------------------------------------------------------------------
#                              OPTIONS
# ----------------------------------------------------------------------
#
# Note, we trip _configTripped for every option that requires the tab
# to be remade.
#
# ----------------------------------------------------------------------
# OPTION -bevelamount
#
# Specifies the size of tab corners. A value of 0 with angle set
# to 0 results in square tabs. A bevelAmount of 4, means that the
# tab will be drawn with angled corners that cut in 4 pixels from
# the edge of the tab. The default is 0.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::bevelamount {
}
 
# ----------------------------------------------------------------------
# OPTION -state
#
# sets the active state of the tab. specifying normal allows
# the tab to be selectable. Specifying disabled disables the tab,
# causing its image, bitmap, or label to be drawn with the
# disabledForeground color.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::state {
}
 
# ----------------------------------------------------------------------
# OPTION -height
#
# the height of the tab. if 0, uses the font label height.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::height {
    set _height [winfo pixels $_canvas $height]
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -width
#
# The width of the tab. If 0, uses the font label width.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::width {
    set _width [winfo pixels $_canvas $width]
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -anchor
#
# Where the text in the tab will be anchored: n,nw,ne,s,sw,se,e,w,center
# ----------------------------------------------------------------------
configbody iwidgets::Tab::anchor {
}
 
# ----------------------------------------------------------------------
# OPTION -left
#
# Specifies the left edge of the tab's bounding box. This value
# may have any of the forms acceptable to Tk_GetPixels.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::left {
 
    # get into pixels
    set _left [winfo pixels $_canvas $left]
 
    # move by offset from last setting
    $_canvas move $this [expr $_left - $_oldLeft] 0
 
    # update old for next time
    set _oldLeft $_left
}
 
# ----------------------------------------------------------------------
# OPTION -top
#
# Specifies the topedge of the tab's bounding box. This value may
# have any of the forms acceptable to Tk_GetPixels.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::top {
 
    # get into pixels
    set _top [winfo pixels $_canvas $top]
 
    # move by offset from last setting
    $_canvas move $this 0 [expr $_top - $_oldTop]
 
    # update old for next time
    set _oldTop $_top
}
 
# ----------------------------------------------------------------------
# OPTION -image
#
# Specifies the imageto display in the tab.
# Images are created with the image create command.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::image {
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -bitmap
#
# If bitmap is an empty string, specifies the bitmap to display in
# the tab. Bitmap may be of any of the forms accepted by Tk_GetBitmap.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::bitmap {
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -label
#
# If image is an empty string and bitmap is an empty string,
# it specifies a text string to be placed in the tab's label.
# This label serves as an additional identifier used to reference
# the tab. Label may be used for the index value in widget commands.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::label {
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -padx
#
# Horizontal padding around the label (text, image, or bitmap).
# ----------------------------------------------------------------------
configbody iwidgets::Tab::padx {
    set _configTripped true
    set _padX [winfo pixels $_canvas $padx]
}
 
# ----------------------------------------------------------------------
# OPTION -pady
#
# Vertical padding around the label (text, image, or bitmap).
# ----------------------------------------------------------------------
configbody iwidgets::Tab::pady {
    set _configTripped true
    set _padY [winfo pixels $_canvas $pady]
}
 
# ----------------------------------------------------------------------
# OPTION -selectbackground
# ----------------------------------------------------------------------
configbody iwidgets::Tab::selectbackground {
    set _darkShadow  [iwidgets::colors::bottomShadow $selectbackground]
    set _lightShadow [iwidgets::colors::topShadow $selectbackground]
 
    if { $_selected } {
        _selectNoRaise
    } else {
        _deselectNoLower
    }
}
 
# ----------------------------------------------------------------------
# OPTION -selectforeground
#
# Foreground of tab when selected
# ----------------------------------------------------------------------
configbody iwidgets::Tab::selectforeground {
    if { $_selected } {
        _selectNoRaise
    } else {
        _deselectNoLower
    }
}
 
# ----------------------------------------------------------------------
# OPTION -disabledforeground
#
# Background of tab when -state is disabled
# ----------------------------------------------------------------------
configbody iwidgets::Tab::disabledforeground {
    if { $_selected } {
        _selectNoRaise
    } else {
        _deselectNoLower
    }
}
 
# ----------------------------------------------------------------------
# OPTION -background
#
# Normal background of tab.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::background {
 
    if { $_selected } {
        _selectNoRaise
    } else {
        _deselectNoLower
    }
 
}
 
# ----------------------------------------------------------------------
# OPTION -foreground
#
# Foreground of tabs when in normal unselected state
# ----------------------------------------------------------------------
configbody iwidgets::Tab::foreground {
    if { $_selected } {
        _selectNoRaise
    } else {
        _deselectNoLower
    }
}
 
# ----------------------------------------------------------------------
# OPTION -orient
#
# Specifies the orientation of the tab. Orient can be either
# horizontal or vertical.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::orient {
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -invert
#
# Specifies the direction to draw the tab. If invert is true,
# it draws horizontal tabs upside down and vertical tabs opening
# to the left (pointing right). The value may have any of the
# forms accepted by the Tcl_GetBoolean, such as true,
# false, 0, 1, yes, or no.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::invert {
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -angle
#
# Specifes the angle of slope from the inner edge to the outer edge
# of the tab. An angle of 0 specifies square tabs. Valid ranges are
# 0 to 45 degrees inclusive. Default is 15 degrees. If this option
# is specified as an empty string (the default), then the angle
# option for the overall Tabset is used.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::angle {
    if {$angle < 0 || $angle > 45 } {
        error "bad angle: must be between 0 and 45"
    }
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# OPTION -font
#
# Font for tab text.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::font {
}
 
 
# ----------------------------------------------------------------------
# OPTION -tabborders
#
# Specifies whether to draw the borders of a deselected tab.
# Specifying true (the default) draws these borders,
# specifying false disables this drawing. If the tab is in
# its selected state this option has no effect.
# The value may have any of the forms accepted by the
# Tcl_GetBoolean, such as true, false, 0, 1, yes, or no.
# ----------------------------------------------------------------------
configbody iwidgets::Tab::tabborders {
    set _configTripped true
}
 
# ----------------------------------------------------------------------
# METHOD: configure ?option value?
#
# Configures the Tab, checks a configTripped flag to see if the tab
# needs to be remade. We take the easy way since it is so inexpensive
# to delete canvas items and remake them.
# ----------------------------------------------------------------------
body iwidgets::Tab::configure {args} {
    set len [llength $args]
 
    switch $len {
 
            set result [_itk_config]
            return $result
        }
        1 {
            set result [eval _itk_config $args]
            return $result
        }
        default {
            eval _itk_config $args
            if { $_configTripped } {
                _makeTab
                set _configTripped false
            }
            return ""
        }
    }
}
 
# ----------------------------------------------------------------------
# METHOD: bbox
#
# Returns the bounding box of the tab
# ----------------------------------------------------------------------
body iwidgets::Tab::bbox {} {
    return [lappend bbox $_left $_top $_right $_bottom]
}
# ----------------------------------------------------------------------
# METHOD: deselect
#
# Causes the given tab to be drawn as deselected and lowered
# ----------------------------------------------------------------------
body iwidgets::Tab::deselect {} {
    global tcl_platform
    $_canvas lower $this
 
    if {$tcl_platform(os) == "HP-UX"} {
        update idletasks
    }
 
    _deselectNoLower
}
 
# ----------------------------------------------------------------------
# METHOD: lower
#
# Lowers the tab below all others in the canvas.
#
# This is used as our tag name on the canvas.
# ----------------------------------------------------------------------
body iwidgets::Tab::lower {} {
    $_canvas lower $this
}
 
# ----------------------------------------------------------------------
# METHOD: majordim
#
# Returns the width for horizontal tabs and the height for
# vertical tabs.
# ----------------------------------------------------------------------
body iwidgets::Tab::majordim {} {
    return $_majorDim
}
 
# ----------------------------------------------------------------------
# METHOD: minordim
#
# Returns the height for horizontal tabs and the width for
# vertical tabs.
# ----------------------------------------------------------------------
body iwidgets::Tab::minordim {} {
    return $_minorDim
}
 
# ----------------------------------------------------------------------
# METHOD: offset
#
# Returns the width less the angle offset. This allows a
# geometry manager to ask where to place a sibling tab.
# ----------------------------------------------------------------------
body iwidgets::Tab::offset {} {
    return $_offset
}
 
# ----------------------------------------------------------------------
# METHOD: raise
#
# Raises the tab above all others in the canvas.
#
# This is used as our tag name on the canvas.
# ----------------------------------------------------------------------
body iwidgets::Tab::raise {} {
    $_canvas raise $this
}
 
# ----------------------------------------------------------------------
# METHOD: select
#
# Causes the given tab to be drawn as selected. 3d shadows are
# turned on and top line and top line shadow are drawn in sel
# bg color to hide them.
# ----------------------------------------------------------------------
body iwidgets::Tab::select {} {
    global tcl_platform
    $_canvas raise $this
 
    if {$tcl_platform(os) == "HP-UX"} {
        update idletasks
    }
 
    _selectNoRaise
}
 
# ----------------------------------------------------------------------
# METHOD: labelheight
#
# Returns the height of the tab's label in its current font.
# ----------------------------------------------------------------------
body iwidgets::Tab::labelheight {} {
    if {$_gLabel != 0} {
        set labelBBox [$_canvas bbox $_gLabel]
        set labelHeight [expr [lindex $labelBBox 3] - [lindex $labelBBox 1]]
    } else {
        set labelHeight 0
    }
    return $labelHeight
}
 
# ----------------------------------------------------------------------
# METHOD: labelwidth
#
# Returns the width of the tab's label in its current font.
# ----------------------------------------------------------------------
body iwidgets::Tab::labelwidth {} {
    if {$_gLabel != 0} {
        set labelBBox [$_canvas bbox $_gLabel]
        set labelWidth [expr [lindex $labelBBox 2] - [lindex $labelBBox 0]]
    } else {
        set labelWidth 0
    }
    return $labelWidth
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _selectNoRaise
#
# Draws tab as selected without raising it.
# ----------------------------------------------------------------------
body iwidgets::Tab::_selectNoRaise {} {
    if { ! [info exists _gRegion] } {
        return
    }
 
    $_canvas itemconfigure $_gRegion -fill $selectbackground
    $_canvas itemconfigure $_gTopLine -fill $selectbackground
    $_canvas itemconfigure $_gTopLineShadow -fill $selectbackground
    $_canvas itemconfigure $_gLightShadow -fill $_lightShadow
    $_canvas itemconfigure $_gDarkShadow -fill $_darkShadow
 
    if { $_gLightOutline != {} } {
        $_canvas itemconfigure $_gLightOutline -fill $_lightShadow
    }
    if { $_gBlackOutline != {} } {
        $_canvas itemconfigure $_gBlackOutline -fill black
    }
 
    if { $state == "normal" } {
        if { $image != {}} {
            # do nothing for now
        } elseif { $bitmap != {}} {
            $_canvas itemconfigure $_gLabel \
                    -foreground $selectforeground \
                    -background $selectbackground
        } else {
            $_canvas itemconfigure $_gLabel -fill $selectforeground
        }
    } else {
        if { $image != {}} {
            # do nothing for now
        } elseif { $bitmap != {}} {
            $_canvas itemconfigure $_gLabel \
                    -foreground $disabledforeground \
                    -background $selectbackground
        } else {
            $_canvas itemconfigure $_gLabel -fill $disabledforeground
        }
    }
 
    set _selected true
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _deselectNoLower
#
# Causes the given tab to be drawn as deselected. 3d shadows are
# removed and top line and top line shadow are drawn in visible
# colors to reveal them.
# ----------------------------------------------------------------------
body iwidgets::Tab::_deselectNoLower {} {
    if { ! [info exists _gRegion] } {
        return
    }
 
    $_canvas itemconfigure $_gRegion -fill $background
    $_canvas itemconfigure $_gTopLine -fill black
    $_canvas itemconfigure $_gTopLineShadow -fill $_darkShadow
    $_canvas itemconfigure $_gLightShadow -fill $background
    $_canvas itemconfigure $_gDarkShadow -fill $background
 
    if { $tabborders } {
        if { $_gLightOutline != {} } {
            $_canvas itemconfigure $_gLightOutline -fill $_lightShadow
        }
        if { $_gBlackOutline != {} } {
            $_canvas itemconfigure $_gBlackOutline -fill black
        }
    } else {
        if { $_gLightOutline != {} } {
            $_canvas itemconfigure $_gLightOutline -fill $background
        }
        if { $_gBlackOutline != {} } {
            $_canvas itemconfigure $_gBlackOutline -fill $background
        }
    }
 
 
    if { $state == "normal" } {
        if { $image != {}} {
            # do nothing for now
        } elseif { $bitmap != {}} {
            $_canvas itemconfigure $_gLabel \
                    -foreground $foreground \
                    -background $background
        } else {
            $_canvas itemconfigure $_gLabel -fill $foreground
        }
    } else {
        if { $image != {}} {
            # do nothing for now
        } elseif { $bitmap != {}} {
            $_canvas itemconfigure $_gLabel \
                    -foreground $disabledforeground \
                    -background $background
        } else {
            $_canvas itemconfigure $_gLabel -fill $disabledforeground
        }
    }
 
    set _selected false
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeTab
# ----------------------------------------------------------------------
body iwidgets::Tab::_makeTab {} {
    if { $orient == "horizontal" } {
        if { $invert } {
            _makeNorthTab $_canvas
        } else {
            _makeSouthTab $_canvas
        }
    } elseif { $orient == "vertical" } {
        if { $invert } {
            _makeEastTab $_canvas
        } else {
            _makeWestTab $_canvas
        }
    } else {
        error "bad value for option -orient"
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _createLabel
#
# Creates the label for the tab. Can be either a text label
# or a bitmap label.
# ----------------------------------------------------------------------
body iwidgets::Tab::_createLabel {canvas tagList} {
    if { $image != {}} {
        set _gLabel [$canvas create image \
 
                -image $image \
                -anchor nw \
                -tags $tagList \
                ]
    } elseif { $bitmap != {}} {
        set _gLabel [$canvas create bitmap \
 
                -bitmap $bitmap \
                -anchor nw \
                -tags $tagList \
                ]
    } else {
        set _gLabel [$canvas create text \
 
                -text $label \
                -font $font \
                -anchor nw \
                -tags $tagList \
                ]
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeEastTab
#
# Makes a tab that hangs to the east and opens to the west.
# ----------------------------------------------------------------------
body iwidgets::Tab::_makeEastTab {canvas} {
    $canvas delete $this
    set _gLightOutline {}
    set _gBlackOutline {}
 
    lappend tagList $this TAB
 
    _createLabel $canvas $tagList
 
    _calcLabelDim $_gLabel
 
 
    set right  [expr $_left + $_labelWidth]
    # now have _left, _top, right...
 
    # Turn off calculating angle tabs on Vertical orientations
    #set angleOffset [expr $_labelHeight * $_tan($angle)]
    set angleOffset 0
 
    set outerTop $_top
    set outerBottom \
            [expr $outerTop + $angleOffset + $_labelHeight + $angleOffset]
    set innerTop [expr $outerTop + $angleOffset]
    set innerBottom [expr $outerTop + $angleOffset + $_labelHeight]
 
    # now have _left, _top, right, outerTop, innerTop,
    # innerBottom, outerBottom, width, height
 
    set bottom $innerBottom
    # tab area... gets filled either white or selected
    # done
    set _gRegion [$canvas create polygon \
            $_left $outerTop \
            [expr $right - $bevelamount] $innerTop \
            $right [expr $innerTop + $bevelamount] \
            $right [expr $innerBottom - $bevelamount] \
            [expr $right - $bevelamount] $innerBottom \
            $_left $outerBottom \
            $_left $outerTop \
            -tags $tagList  \
            ]
 
    # lighter shadow (left edge)
    set _gLightShadow [$canvas create line \
            [expr $_left - 3] [expr $outerTop + 1] \
            [expr $right - $bevelamount] [expr $innerTop + 1] \
            -tags $tagList \
            ]
 
    # darker shadow (bottom and right edges)
    set _gDarkShadow [$canvas create line \
            [expr $right - $bevelamount] [expr $innerTop + 1] \
            [expr $right - 1] [expr $innerTop + $bevelamount] \
            [expr $right - 1] [expr $innerBottom - $bevelamount] \
            [expr $right - $bevelamount] [expr $innerBottom - 1] \
            [expr $_left - 3] [expr $outerBottom - 1] \
            -tags $tagList \
            ]
 
    # outline of tab
    set _gLightOutline [$canvas create line \
            $_left $outerTop \
            [expr $right - $bevelamount] $innerTop \
            -tags $tagList \
            ]
    # outline of tab
    set _gBlackOutline [$canvas create line \
            [expr $right - $bevelamount] $innerTop \
            $right [expr $innerTop + $bevelamount] \
            $right [expr $innerBottom - $bevelamount] \
            [expr $right - $bevelamount] $innerBottom \
            $_left $outerBottom \
            $_left $outerTop \
            -tags $tagList \
            ]
 
    # line closest to the edge
    set _gTopLineShadow [$canvas create line \
            $_left $outerTop \
            $_left $outerBottom \
            -tags $tagList \
            ]
 
    # next line down
    set _gTopLine [$canvas create line \
            [expr $_left + 1] [expr $outerTop + 2] \
            [expr $_left + 1] [expr $outerBottom - 1] \
            -tags $tagList  \
            ]
 
    $canvas coords $_gLabel [expr $_left + $_labelXOrigin] \
            [expr $innerTop + $_labelYOrigin]
 
    if { $image != {} || $bitmap != {} } {
        $canvas itemconfigure $_gLabel -anchor $anchor
    } else {
        $canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
    }
 
    $canvas raise $_gLabel $_gRegion
 
 
    set _offset    [expr $innerBottom - $outerTop]
    # height
    set _majorDim  [expr $outerBottom - $outerTop]
    # width
    set _minorDim [expr $right - $_left]
 
    set _right   $right
    set _bottom  $outerBottom
 
    # draw in correct state...
    if { $_selected } {
        select
    } else {
        deselect
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeWestTab
#
# Makes a tab that hangs to the west and opens to the east.
# ----------------------------------------------------------------------
body iwidgets::Tab::_makeWestTab {canvas} {
    $canvas delete $this
    set _gLightOutline {}
    set _gBlackOutline {}
 
    lappend tagList $this TAB
 
    _createLabel $canvas $tagList
    _calcLabelDim $_gLabel
 
    set right  [expr $_left + $_labelWidth]
    # now have _left, _top, right...
 
    # Turn off calculating angle tabs on Vertical orientations
    #set angleOffset [expr $_labelHeight * $_tan($angle)]
    set angleOffset 0
 
    set outerTop $_top
    set outerBottom \
            [expr $outerTop + $angleOffset + $_labelHeight + $angleOffset]
    set innerTop [expr $outerTop + $angleOffset]
    set innerBottom [expr $outerTop + $angleOffset + $_labelHeight]
 
    # now have _left, _top, right, outerTop, innerTop,
    # innerBottom, outerBottom, width, height
 
    # tab area... gets filled either white or selected
    # done
    set _gRegion [$canvas create polygon \
            $right $outerTop \
            [expr $_left + $bevelamount] $innerTop \
            $_left [expr $innerTop + $bevelamount] \
            $_left [expr $innerBottom - $bevelamount]\
            [expr $_left + $bevelamount] $innerBottom \
            $right $outerBottom \
            $right $outerTop \
            -tags $tagList  \
            ]
    # lighter shadow (left edge)
    set _gLightShadow [$canvas create line \
            $right [expr $outerTop+1] \
            [expr $_left + $bevelamount] [expr $innerTop + 1] \
            [expr $_left + 1] [expr $innerTop + $bevelamount] \
            [expr $_left + 1] [expr $innerBottom - $bevelamount] \
            -tags $tagList \
            ]
 
    # darker shadow (bottom and right edges)
    set _gDarkShadow [$canvas create line \
            [expr $_left + 1] [expr $innerBottom - $bevelamount] \
            [expr $_left + $bevelamount] [expr $innerBottom - 1] \
            $right [expr $outerBottom - 1] \
            -tags $tagList \
            ]
 
    # outline of tab -- lighter top left sides
    set _gLightOutline [$canvas create line \
            $right $outerTop \
            [expr $_left + $bevelamount] $innerTop \
            $_left [expr $innerTop + $bevelamount] \
            $_left [expr $innerBottom - $bevelamount]\
            -tags $tagList \
            ]
    # outline of tab -- darker bottom side
    set _gBlackOutline [$canvas create line \
            $_left [expr $innerBottom - $bevelamount]\
            [expr $_left + $bevelamount] $innerBottom \
            $right $outerBottom \
            $right $outerTop \
            -tags $tagList \
            ]
 
    # top of tab
    set _gTopLine [$canvas create line \
            [expr $right + 1] $outerTop \
            [expr $right + 1] $outerBottom \
            -tags $tagList  \
            ]
 
    # line below top of tab
    set _gTopLineShadow [$canvas create line \
            $right $outerTop \
            $right $outerBottom \
            -tags $tagList \
            ]
 
    $canvas coords $_gLabel [expr $_left + $_labelXOrigin] \
            [expr $innerTop + $_labelYOrigin]
    if { $image != {} || $bitmap != {} } {
        $canvas itemconfigure $_gLabel -anchor $anchor
    } else {
        $canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
    }
 
    $canvas raise $_gLabel $_gRegion
 
 
    set _offset    [expr $innerBottom - $outerTop]
    # height
    set _majorDim  [expr $outerBottom - $outerTop]
    # width
    set _minorDim [expr $right - $_left]
 
    set _right   $right
    set _bottom  $outerBottom
 
    # draw in correct state...
    if { $_selected } {
        select
    } else {
        deselect
    }
 
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeNorthTab
#
# Makes a tab that hangs to the north and opens to the south.
# ----------------------------------------------------------------------
body iwidgets::Tab::_makeNorthTab {canvas} {
    $canvas delete $this
    set _gLightOutline {}
    set _gBlackOutline {}
 
    lappend tagList $this TAB
 
    _createLabel $canvas $tagList
 
    # first get the label width and height
    _calcLabelDim $_gLabel
 
    set bottom [expr $_top + $_labelHeight]
 
    set angleOffset [expr $_labelHeight * $_tan($angle)]
 
    set outerLeft $_left
    set outerRight \
            [expr $outerLeft + $angleOffset + $_labelWidth + $angleOffset]
    set innerLeft [expr $outerLeft + $angleOffset]
    set innerRight [expr $outerLeft + $angleOffset + $_labelWidth]
 
    # tab area... gets filled either white or selected
    set _gRegion [$canvas create polygon \
            $outerLeft [expr $bottom + 3]  \
            $innerLeft [expr $_top + $bevelamount] \
            [expr $innerLeft +  $bevelamount] $_top \
            [expr $innerRight - $bevelamount] $_top \
            $innerRight [expr $_top + $bevelamount]\
            $outerRight [expr $bottom + 3] \
            $outerLeft [expr $bottom + 3] \
            -tags $tagList  \
            ]
 
    # lighter shadow (left edge)
    set _gLightShadow [$canvas create line \
            [expr $outerLeft + 1] [expr $bottom + 3]  \
            [expr $innerLeft + 1] [expr $_top + $bevelamount] \
            [expr $innerLeft + $bevelamount] [expr $_top + 1]\
            [expr $innerRight - $bevelamount] [expr $_top + 1]\
            -tags $tagList \
            ]
 
    # darker shadow (bottom and right edges)
    set _gDarkShadow [$canvas create line \
            [expr $innerRight - $bevelamount] [expr $_top + 1]\
            [expr $innerRight - 1] [expr $_top + $bevelamount]\
            [expr $outerRight - 1] [expr $bottom + 3]\
            -tags $tagList \
            ]
 
    set _gLightOutline [$canvas create line \
            $outerLeft [expr $bottom + 3]  \
            $innerLeft [expr $_top + $bevelamount] \
            [expr $innerLeft +  $bevelamount] $_top \
            [expr $innerRight - $bevelamount] $_top \
            -tags $tagList \
            ]
 
    set _gBlackOutline [$canvas create line \
            [expr $innerRight - $bevelamount] $_top \
            $innerRight [expr $_top + $bevelamount]\
            $outerRight [expr $bottom + 3] \
            $outerLeft [expr $bottom + 3] \
            -tags $tagList \
            ]
 
    # top of tab... to make it closed off
    set _gTopLine [$canvas create line \
 
            -tags $tagList  \
            ]
    #[expr $outerLeft + 2] [expr $_top + 1] \
            [expr $outerRight - 2] [expr $_top + 1]
 
    # top of tab... to make it closed off
    set _gTopLineShadow [$canvas create line \
 
            -tags $tagList \
            ]
    #$outerLeft $_top \
            $outerRight $_top
 
    $canvas coords $_gLabel [expr $innerLeft + $_labelXOrigin] \
            [expr $_top + $_labelYOrigin]
 
    if { $image != {} || $bitmap != {} } {
        $canvas itemconfigure $_gLabel -anchor $anchor
    } else {
        $canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
    }
 
    $canvas raise $_gLabel $_gRegion
 
 
    set _offset    [expr $innerRight - $outerLeft]
    # width
    set _majorDim  [expr $outerRight - $outerLeft]
    # height
    set _minorDim [expr $bottom - $_top]
 
    set _right     $outerRight
    set _bottom    $bottom
 
    # draw in correct state...
    if { $_selected } {
        select
    } else {
        deselect
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeSouthTab
#
# Makes a tab that hangs to the south and opens to the north.
# ----------------------------------------------------------------------
body iwidgets::Tab::_makeSouthTab {canvas} {
    $canvas delete $this
    set _gLightOutline {}
    set _gBlackOutline {}
 
    lappend tagList $this TAB
 
    _createLabel $canvas $tagList
 
    # first get the label width and height
    _calcLabelDim $_gLabel
 
    set bottom [expr $_top + $_labelHeight]
 
    set angleOffset [expr $_labelHeight * $_tan($angle)]
 
    set outerLeft $_left
    set outerRight \
            [expr $outerLeft + $angleOffset + $_labelWidth + $angleOffset]
    set innerLeft [expr $outerLeft + $angleOffset]
    set innerRight [expr $outerLeft + $angleOffset + $_labelWidth]
 
    # tab area... gets filled either white or selected
    set _gRegion [$canvas create polygon \
            $outerLeft [expr $_top + 1] \
            $innerLeft [expr $bottom  - $bevelamount]\
            [expr $innerLeft + $bevelamount] $bottom \
            [expr $innerRight - $bevelamount] $bottom \
            $innerRight [expr $bottom - $bevelamount]\
            $outerRight [expr $_top + 1] \
            $outerLeft [expr $_top + 1] \
            -tags $tagList  \
            ]
 
 
    # lighter shadow (left edge)
    set _gLightShadow [$canvas create line \
            [expr $outerLeft+1] $_top \
            [expr $innerLeft+1] [expr $bottom-$bevelamount] \
            -tags $tagList \
            ]
 
    # darker shadow (bottom and right edges)
    set _gDarkShadow [$canvas create line \
            [expr $innerLeft+1] [expr $bottom-$bevelamount] \
            [expr $innerLeft+$bevelamount] [expr $bottom-1] \
            [expr $innerRight-$bevelamount] [expr $bottom-1] \
            [expr $innerRight-1] [expr $bottom-$bevelamount] \
            [expr $outerRight-1] [expr $_top + 1] \
            -tags $tagList \
            ]
    # outline of tab
    set _gBlackOutline [$canvas create line \
            $outerLeft [expr $_top + 1] \
            $innerLeft [expr $bottom  -$bevelamount]\
            [expr $innerLeft + $bevelamount] $bottom \
            [expr $innerRight - $bevelamount] $bottom \
            $innerRight [expr $bottom - $bevelamount]\
            $outerRight [expr $_top + 1] \
            -tags $tagList \
            ]
 
    # top of tab... to make it closed off
    set _gTopLine [$canvas create line \
            $outerLeft [expr $_top + 1] \
            $outerRight [expr $_top + 1] \
            -tags $tagList  \
            ]
 
    # top of tab... to make it closed off
    set _gTopLineShadow [$canvas create line \
            $outerLeft $_top \
            $outerRight $_top \
            -tags $tagList \
            ]
 
    #$canvas coords $_gLabel [expr $innerLeft + $_padX + 2] \
            [expr $_top + $_padY]
    $canvas coords $_gLabel [expr $innerLeft + $_labelXOrigin] \
            [expr $_top + $_labelYOrigin]
 
    if { $image != {} || $bitmap != {} } {
        $canvas itemconfigure $_gLabel -anchor $anchor
    } else {
        $canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
    }
    $canvas raise $_gLabel $_gRegion
 
 
    set _offset    [expr $innerRight - $outerLeft]
 
    # width
    set _majorDim  [expr $outerRight - $outerLeft]
 
    # height
    set _minorDim [expr $bottom - $_top]
 
    set _right     $outerRight
    set _bottom    $bottom
 
    # draw in correct state...
    if { $_selected } {
        select
    } else {
        deselect
    }
}
 
# ----------------------------------------------------------------------
# PRIVATE METHOD: _calcLabelDim
#
# Calculate the width and height of the label bbox of labelItem
# can be either text or bitmap (in future also an image)
#
# There are two ways to calculate the label bbox.
#
# First, if the $_width and/or $_height is specified, we will use
# it to determine that dimension(s) width and/or height. For
# a width/height of 0 we use the labels bbox to
# give us a base width/height.
# Then we add in the padx/pady to determine final bounds.
#
# Uses the following option or option derived variables:
#       -padx     ($_padX - converted to pixels)
#       -pady     ($_padY - converted to pixels)
#       -anchor   ($anchor)
#       -width    ($_width) This is the width for inside tab (label area)
#       -height   ($_height) This is the width for inside tab (label area)
#
# Side Effects:
#       _labelWidth will be set
#       _labelHeight will be set
#       _labelXOrigin will be set
#       _labelYOrigin will be set
# ----------------------------------------------------------------------
body iwidgets::Tab::_calcLabelDim {labelItem} {
    # ... calculate the label width and height
    set labelBBox [$_canvas bbox $labelItem]
 
    if { $_width > 0 } {
        set _labelWidth [expr $_width + ($_padX * 2)]
    } else {
        set _labelWidth [expr \
                ([lindex $labelBBox 2] - [lindex $labelBBox 0]) + ($_padX * 2)]
    }
 
    if { $_height > 0 } {
        set _labelHeight [expr $_height + ($_padY * 2)]
    } else {
        set _labelHeight [expr \
                ([lindex $labelBBox 3] - [lindex $labelBBox 1]) + ($_padY * 2)]
    }
 
    # ... calculate the label anchor point
    set centerX [expr $_labelWidth/2.0]
    set centerY [expr $_labelHeight/2.0 - 1]
 
    switch $anchor {
        n {
            set _labelXOrigin $centerX
            set _labelYOrigin $_padY
            set _just center
        }
        s {
            set _labelXOrigin $centerX
            set _labelYOrigin [expr $_labelHeight - $_padY]
            set _just center
        }
        e {
            set _labelXOrigin [expr $_labelWidth - $_padX - 1]
            set _labelYOrigin $centerY
            set _just right
        }
        w {
            set _labelXOrigin [expr $_padX + 2]
            set _labelYOrigin $centerY
            set _just left
        }
        c {
            set _labelXOrigin $centerX
            set _labelYOrigin $centerY
            set _just center
        }
        ne {
            set _labelXOrigin [expr $_labelWidth - $_padX - 1]
            set _labelYOrigin $_padY
            set _just right
        }
        nw {
            set _labelXOrigin [expr $_padX + 2]
            set _labelYOrigin $_padY
            set _just left
        }
        se {
            set _labelXOrigin [expr $_labelWidth - $_padX - 1]
            set _labelYOrigin [expr $_labelHeight - $_padY]
            set _just right
        }
        sw {
            set _labelXOrigin [expr $_padX + 2]
            set _labelYOrigin [expr $_labelHeight - $_padY]
            set _just left
        }
        default {
            error "bad anchor position: \
                    \"$tabpos\" must be n, ne, nw, s, sw, se, e, w, or center"
        }
    }
}
Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [tags/] [start/] [insight/] [itcl/] [iwidgets3.0.0/] [generic/] [tabset.itk] - Blame information for rev 1782

Line No.	Rev	Author	Line
1	578	markom	`#`
2			`# Tabset Widget and the Tab Class`
3			`# ----------------------------------------------------------------------`
4			`# A Tabset is a widget that contains a set of Tab buttons.`
5			`# It displays these tabs in a row or column depending on it tabpos.`
6			`# When a tab is clicked on, it becomes the only tab in the tab set that`
7			`# is selected. All other tabs are deselected. The Tcl command prefix`
8			`# associated with this tab (through the command tab configure option)`
9			`# is invoked with the tab index number appended to its argument list.`
10			`# This allows the Tabset to control another widget such as a Notebook.`
11			`#`
12			`# A Tab class is an [incr Tcl] class that displays either an image,`
13			`# bitmap, or label in a graphic object on a canvas. This graphic object`
14			`# can have a wide variety of appearances depending on the options set.`
15			`#`
16			`# WISH LIST:`
17			`# This section lists possible future enhancements.`
18			`#`
19			`# 1) When too many tabs appear, a small scrollbar should appear to`
20			`# move the tabs over.`
21			`#`
22			`# ----------------------------------------------------------------------`
23			`# AUTHOR: Bill W. Scott EMAIL: bscott@spd.dsccc.com`
24			`#`
25			`# @(#) $Id: tabset.itk,v 1.1.1.1 2002-01-16 10:24:50 markom Exp $`
26			`# ----------------------------------------------------------------------`
27			`# Copyright (c) 1995 DSC Technologies Corporation`
28			`# ======================================================================`
29			`# Permission to use, copy, modify, distribute and license this software`
30			`# and its documentation for any purpose, and without fee or written`
31			`# agreement with DSC, is hereby granted, provided that the above copyright`
32			`# notice appears in all copies and that both the copyright notice and`
33			`# warranty disclaimer below appear in supporting documentation, and that`
34			`# the names of DSC Technologies Corporation or DSC Communications`
35			`# Corporation not be used in advertising or publicity pertaining to the`
36			`# software without specific, written prior permission.`
37			`#`
38			`# DSC DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING`
39			`# ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NON-`
40			`# INFRINGEMENT. THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, AND THE`