OpenCores
URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [insight/] [dejagnu/] [config/] [base68k.exp] - Blame information for rev 578

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 578 markom 
# Copyright (C) 1994, 1996, 1997 Free Software Foundation, Inc.
2 
 
3 
# This program is free software; you can redistribute it and/or modify
4 
# it under the terms of the GNU General Public License as published by
5 
# the Free Software Foundation; either version 2 of the License, or
6 
# (at your option) any later version.
7 
#
8 
# This program is distributed in the hope that it will be useful,
9 
# but WITHOUT ANY WARRANTY; without even the implied warranty of
10 
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11 
# GNU General Public License for more details.
12 
#
13 
# You should have received a copy of the GNU General Public License
14 
# along with this program; if not, write to the Free Software
15 
# Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
16 
 
17 
# Please email any bugs, comments, and/or additions to this file to:
18 
# DejaGnu@cygnus.com
19 
 
20 
# This file was written by Bob Manson (manson@cygnus.com)
21 
# based on earlier work by JT Conklin (jtc@cygnus.com)
22 
 
23 
#
24 
# base68k_load -- load the program and execute it
25 
#
26 
 
27 
proc base68k_ld { dest prog } {
28 
    global tmpdir
29 
 
30 
    set shell_prompt [board_info $dest shell_prompt]
31 
 
32 
    if ![file exists $prog] then {
33 
        verbose -log "$prog does not exist."
34 
        return "untested"
35 
    }
36 
    if [is_remote host] {
37 
        set prog [remote_download host $prog];
38 
        if { $prog == "" } {
39 
            verbose -log "Unable to download $prog to host.";
40 
            return "untested";
41 
        }
42 
    }
43 
 
44 
    if [board_info $dest exists objcopy] {
45 
        set OBJCOPY [board_info $dest objcopy];
46 
        set exec_file "${prog}.srec"
47 
        set objcopy_args ""
48 
        if [board_info $dest exists use_vma_offset] {
49 
            set objcopy_args "--adjust-vma=[board_info $dest hex_startaddr]";
50 
        }
51 
        set status [remote_exec host "$OBJCOPY $objcopy_args -O srec $prog ${prog}.srec"]
52 
        set result [lindex $status 1];
53 
        regsub -all -- "\[\r\n\]*" $result "" result
54 
        if { $result != ""  || [lindex $status 0] != 0 } {
55 
            warning "Got \"$result\" from $OBJCOPY"
56 
            verbose -log "Couldn't convert to srecord for downloading"
57 
            remote_close $dest;
58 
            return "untested"
59 
        } else {
60 
            verbose "Converted $prog to an srecord." 2
61 
        }
62 
    } else {
63 
        set exec_file $prog
64 
    }
65 
 
66 
    set value 0;
67 
    if ![board_info $dest exists fileid] {
68 
        while { $value < 2 } {
69 
            set rom68k_shell_id [remote_open $dest]
70 
            if { $rom68k_shell_id < 0 } {
71 
                if { $value > 0 || ![remote_reboot $dest] } {
72 
                    verbose -log "$prog not executed, couldn't connect to target."
73 
                    return "untested"
74 
                }
75 
                incr value;
76 
            } else {
77 
                break;
78 
            }
79 
        }
80 
        # dbug has problems if we go into binary mode, so this allows us to
81 
        # disable entry into binary mode.
82 
        if ![board_info $dest exists no_binary_mode] {
83 
            remote_binary $dest;
84 
        }
85 
    }
86 
 
87 
    # if we built the srecord on a remote host, copy it back here so we
88 
    # can load it
89 
    if [is_remote host] {
90 
        global objdir
91 
        set exec_file [remote_upload host ${exec_file} "${objdir}/a.out"];
92 
    }
93 
 
94 
    set got_p 0;
95 
    for { set tries 0; } { (! $got_p) && $tries < 5 } { incr tries } {
96 
        remote_send $dest "\r\n\r\n"
97 
        remote_expect $dest 5 {
98 
            -re "${shell_prompt}$" {
99 
                verbose "Got prompt."
100 
                set result 0
101 
                set got_p 1;
102 
            }
103 
            timeout {
104 
                warning "Never got prompt."
105 
            }
106 
        }
107 
        if { ! $got_p } {
108 
            if $tries<=4 then {
109 
                if { $tries == 3 } then {
110 
                    remote_reboot $dest;
111 
                } else {
112 
                    remote_send $dest "\r\n"
113 
                }
114 
            }
115 
        }
116 
    }
117 
 
118 
    # We need to do this in case the connection to the remote side is
119 
    # scrogged -- the remote_expect above will fail in a lot of
120 
    # non-clean ways.
121 
    if { ! $got_p } {
122 
        remote_close $dest;
123 
        remote_reboot $dest;
124 
        return "unresolved";
125 
    } else {
126 
        # Flush out any remaining cruft.
127 
        remote_expect $dest 2 {
128 
            timeout { }
129 
            -re ".+" { exp_continue }
130 
            default { }
131 
        }
132 
    }
133 
 
134 
    if [board_info $dest exists download_command] {
135 
        # Load the program.
136 
        remote_send $dest "\r\n";
137 
        # dbug has problems sending download command immediately after a
138 
        # newline, so we wait for the prompt to come back first.
139 
        remote_expect $dest 5 {
140 
            -re "${shell_prompt}$" {
141 
                verbose -log "Got prompt."
142 
            }
143 
            timeout {
144 
                warning "Never got prompt."
145 
            }
146 
        }
147 
        remote_send $dest [board_info $dest download_command]
148 
        if [board_info $dest exists download_response] {
149 
            remote_expect $dest 5 {
150 
                 [board_info $dest download_response] { }
151 
                 timeout {
152 
                    perror "Download command never responded."
153 
                    return "unresolved";
154 
                }
155 
            }
156 
        }
157 
    }
158 
 
159 
    verbose "Writing records to target..."
160 
    set status [remote_transmit $dest $exec_file];
161 
    if { $exec_file != $prog } {
162 
        remote_file build delete $exec_file
163 
    }
164 
    if { $status != 0 } {
165 
        remote_close $dest;
166 
        verbose -log "Transmission of $exec_file to the target failed." 3
167 
        return "unresolved"
168 
    }
169 
    verbose "Wrote records to target...waiting for prompt."
170 
    remote_send $dest "\n"
171 
    set got_p 0;
172 
    remote_expect $dest 50 {
173 
        -re "$shell_prompt$" {
174 
            verbose "Got prompt."
175 
            set got_p 1;
176 
        }
177 
        timeout { }
178 
    }
179 
    if { $got_p } {
180 
        # Flush any remaining cruft. 2 seconds may be too long, dunno.
181 
        remote_expect $dest 2 {
182 
            timeout { }
183 
            -re ".+" { exp_continue }
184 
            default { }
185 
        }
186 
        return "pass";
187 
    } else {
188 
        remote_close $dest;
189 
        remote_reboot $dest;
190 
        return "unresolved";
191 
    }
192 
 
193 
}
194 
 
195 
 
196 
proc base68k_spawn { dest prog args } {
197 
    set shell_prompt [board_info $dest shell_prompt];
198 
 
199 
    set result [remote_ld $dest $prog];
200 
    if { $result != "pass" } {
201 
        return [list $result ""];
202 
    }
203 
 
204 
    if [board_info $dest exists startaddr] {
205 
        set go_command "[board_info $dest go_command] [board_info $dest startaddr]";
206 
    } else {
207 
        set go_command "[board_info $dest go_command]";
208 
    }
209 
 
210 
    verbose "Sending $go_command, waiting for results.";
211 
    remote_send $dest "${go_command}\n";
212 
    return { "pass" "" };
213 
}
214 
 
215 
proc base68k_wait { dest timeout } {
216 
    set shell_prompt [board_info $dest shell_prompt];
217 
    set noappend 0;
218 
    set result -1;
219 
 
220 
    set output "";
221 
 
222 
    remote_expect $dest $timeout {
223 
        -re [board_info $dest go_response] {
224 
            append output $expect_out(buffer);
225 
            set noappend 1;
226 
            set result 0;
227 
            exp_continue -continue_timer;
228 
        }
229 
        -re "$shell_prompt$" {
230 
            verbose "Got prompt.";
231 
            set result 0;
232 
        }
233 
        -re "\[\r\n\]+" {
234 
            if { ! $noappend } {
235 
                append output $expect_out(buffer);
236 
                if { [string length $output] < 512000 } {
237 
                    exp_continue -continue_timer;
238 
                } else {
239 
                    set result -1;
240 
                }
241 
            }
242 
        }
243 
        timeout {
244 
            warning "Nothing ever came back.";
245 
            set result -1;
246 
        }
247 
    }
248 
 
249 
    if [board_info $dest exists output_end] {
250 
        regsub "[board_info $dest output_end]" "$output" "\n" output;
251 
    }
252 
 
253 
    # There has got to be a better way. (We need to do this in order to remove
254 
    # the echoed "go command".
255 
    if [board_info $dest exists startaddr] {
256 
        set go_command "[board_info $dest go_command] [board_info $dest startaddr]";
257 
    } else {
258 
        set go_command "[board_info $dest go_command]";
259 
    }
260 
 
261 
    regsub "^.*$go_command\[\r\n\]*" "$output" "" output;
262 
    regsub "^.*$go_command\[\r\n\]*" "$output" "" output;
263 
 
264 
    # We always want to check for a status, even if there was a funky weird
265 
    # failure above.
266 
    set status [check_for_board_status output];
267 
    if { $result == 0 } {
268 
        set result $status;
269 
        verbose -log "exit status was $status";
270 
    }
271 
    # A negative value indicates that we should reboot. Otherwise, return
272 
    # the exit status from the program if we got one (and we should have).
273 
    return [list $result "$output"];
274 
}
275 
 
276 
proc base68k_load { dest prog args } {
277 
    global base68k_retry
278 
 
279 
    set shell_prompt [board_info $dest shell_prompt];
280 
 
281 
    if { [llength $args] > 0 } {
282 
        for { set x 0; } { $x < [llength $args] } { incr x ; } {
283 
            if { [lindex $args $x] != "" } {
284 
                verbose -log "Cannot pass parameters or input file to this target";
285 
                return [list "unsupported" ""];
286 
            }
287 
        }
288 
    }
289 
 
290 
    set result [remote_spawn $dest $prog];
291 
    if { [lindex $result 0] != "pass" } {
292 
        return $result;
293 
    }
294 
 
295 
    # FIXME: The value 360 below should be a parameter.
296 
 
297 
    set result [remote_wait $dest 360];
298 
    set output [lindex $result 1];
299 
    set status [lindex $result 0];
300 
 
301 
    verbose "output from board is $output"
302 
 
303 
    # Make sure there's a newline before the PASS/FAIL/whatever for the log.
304 
    send_log "\n"
305 
 
306 
    if { $status > 0 } {
307 
        return [list "fail" $output];
308 
    } elseif { $status == 0 } {
309 
        return [list "pass" $output];
310 
    } else {
311 
        if [info exists base68k_retry] {
312 
            return [list "fail" $output];
313 
        }
314 
        set base68k_retry 1;
315 
        remote_reboot $dest;
316 
        set status [eval base68k_load \{$dest\} \{$prog\} $args];
317 
        unset base68k_retry;
318 
        return $status;
319 
    }
320 
}
321 
 
322 
set_board_info protocol "base68k";
323 
set_board_info send_initial_cr 1

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.