Subversion Repositories or1k_old

dnl     This file is an input file used by the GNU "autoconf" program to

dnl     generate the file "configure", which is run during Tcl installation

dnl     to configure the system for the local environment.

# CYGNUS LOCAL, need 2.5 or higher for --bindir et al

AC_PREREQ(2.5)

# END CYGNUS LOCAL

AC_INIT(../generic/tcl.h)

# SCCS: @(#) configure.in 1.18 98/08/12 17:29:39

TCL_VERSION=8.0

TCL_MAJOR_VERSION=8

TCL_MINOR_VERSION=0

TCL_PATCH_LEVEL=".3"

VERSION=${TCL_VERSION}

if test "${prefix}" = "NONE"; then

    prefix=/usr/local

fi

if test "${exec_prefix}" = "NONE"; then

    exec_prefix=$prefix

fi

TCL_SRC_DIR=`cd $srcdir/..; pwd`

AC_PROG_RANLIB

dnl CYGNUS LOCAL: allow gcc without a special flag

dnl AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available],

dnl    [tcl_ok=$enableval], [tcl_ok=no])

dnl if test "$tcl_ok" = "yes"; then

    AC_PROG_CC

dnl else

dnl    CC=${CC-cc}

dnl AC_SUBST(CC)

dnl fi

dnl END CYGNUS LOCAL

# CYGNUS LOCAL

# dje/win32

AR=${AR-ar}

# We need this for substitutions in Makefile.in.

AC_PROG_INSTALL

# END CYGNUS LOCAL

#--------------------------------------------------------------------

# CYGNUS LOCAL:

# This is for LynxOS, which needs a flag to force true POSIX when

# building. It's weirder than that, cause the flag varies depending

# how old the compiler is. So...

# -X is for the old "cc" and "gcc" (based on 1.42)

# -mposix is for the new gcc (at least 2.5.8)

# This modifies the value of $CC to have the POSIX flag added

# so everything will configure correctly.

#--------------------------------------------------------------------

CY_AC_TCL_LYNX_POSIX

# set the warning flags depending on whether or not we are using gcc

if test "${GCC}" = "yes" ; then

    CFLAGS_WARNING="-Wall -Wconversion"

else

    CFLAGS_WARNING=""

fi

#--------------------------------------------------------------------

#       Supply substitutes for missing POSIX library procedures, or

#       set flags so Tcl uses alternate procedures.

#--------------------------------------------------------------------

# Check if Posix compliant getcwd exists, if not we'll use getwd.

AC_CHECK_FUNCS(getcwd, , AC_DEFINE(USEGETWD))

# Nb: if getcwd uses popen and pwd(1) (like SunOS 4) we should really

# define USEGETWD even if the posix getcwd exists. Add a test ?

AC_REPLACE_FUNCS(opendir strstr)

AC_REPLACE_FUNCS(strtol tmpnam waitpid)

AC_CHECK_FUNC(strerror, , AC_DEFINE(NO_STRERROR))

AC_CHECK_FUNC(getwd, , AC_DEFINE(NO_GETWD))

AC_CHECK_FUNC(wait3, , AC_DEFINE(NO_WAIT3))

AC_CHECK_FUNC(uname, , AC_DEFINE(NO_UNAME))

#--------------------------------------------------------------------

#       On a few very rare systems, all of the libm.a stuff is

#       already in libc.a.  Set compiler flags accordingly.

#       Also, Linux requires the "ieee" library for math to work

#       right (and it must appear before "-lm").

#--------------------------------------------------------------------

AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")

AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])

#--------------------------------------------------------------------

#       On AIX systems, libbsd.a has to be linked in to support

#       non-blocking file IO.  This library has to be linked in after

#       the MATH_LIBS or it breaks the pow() function.  The way to

#       insure proper sequencing, is to add it to the tail of MATH_LIBS.

#        This library also supplies gettimeofday.

#--------------------------------------------------------------------

libbsd=no

if test "`uname -s`" = "AIX" ; then

    AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes)

    if test $libbsd = yes; then

        MATH_LIBS="$MATH_LIBS -lbsd"

    fi

fi

#--------------------------------------------------------------------

#       Supply substitutes for missing POSIX header files.  Special

#       notes:

#           - stdlib.h doesn't define strtol, strtoul, or

#             strtod insome versions of SunOS

#           - some versions of string.h don't declare procedures such

#             as strstr

#--------------------------------------------------------------------

AC_MSG_CHECKING(dirent.h)

AC_TRY_LINK([#include 

#include ], [

#ifndef _POSIX_SOURCE

#   ifdef __Lynx__

        /*

         * Generate compilation error to make the test fail:  Lynx headers

         * are only valid if really in the POSIX environment.

         */

        missing_procedure();

#   endif

#endif

DIR *d;

struct dirent *entryPtr;

char *p;

d = opendir("foobar");

entryPtr = readdir(d);

p = entryPtr->d_name;

closedir(d);

], tcl_ok=yes, tcl_ok=no)

if test $tcl_ok = no; then

    AC_DEFINE(NO_DIRENT_H)

fi

AC_MSG_RESULT($tcl_ok)

AC_CHECK_HEADER(errno.h, , AC_DEFINE(NO_ERRNO_H))

AC_CHECK_HEADER(float.h, , AC_DEFINE(NO_FLOAT_H))

AC_CHECK_HEADER(values.h, , AC_DEFINE(NO_VALUES_H))

AC_CHECK_HEADER(limits.h, , AC_DEFINE(NO_LIMITS_H))

AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)

AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)

AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)

AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)

if test $tcl_ok = 0; then

    AC_DEFINE(NO_STDLIB_H)

fi

AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)

AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)

AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)

if test $tcl_ok = 0; then

    AC_DEFINE(NO_STRING_H)

fi

AC_CHECK_HEADER(sys/wait.h, , AC_DEFINE(NO_SYS_WAIT_H))

AC_CHECK_HEADER(dlfcn.h, , AC_DEFINE(NO_DLFCN_H))

AC_HAVE_HEADERS(unistd.h)

#---------------------------------------------------------------------------

#       Determine which interface to use to talk to the serial port.

#       Note that #include lines must begin in leftmost column for

#       some compilers to recognize them as preprocessor directives.

#---------------------------------------------------------------------------

AC_MSG_CHECKING([termios vs. termio vs. sgtty])

AC_TRY_RUN([

#include 

main()

{

    struct termios t;

    if (tcgetattr(0, &t) == 0) {

        cfsetospeed(&t, 0);

        t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;

        return 0;

    }

    return 1;

}], tk_ok=termios, tk_ok=no, tk_ok=no)

if test $tk_ok = termios; then

    AC_DEFINE(USE_TERMIOS)

else

AC_TRY_RUN([

#include 

main()

{

    struct termio t;

    if (ioctl(0, TCGETA, &t) == 0) {

        t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;

        return 0;

    }

    return 1;

}], tk_ok=termio, tk_ok=no, tk_ok=no)

if test $tk_ok = termio; then

    AC_DEFINE(USE_TERMIO)

else

AC_TRY_RUN([

#include 

main()

{

    struct sgttyb t;

    if (ioctl(0, TIOCGETP, &t) == 0) {

        t.sg_ospeed = 0;

        t.sg_flags |= ODDP | EVENP | RAW;

        return 0;

    }

    return 1;

}], tk_ok=sgtty, tk_ok=none, tk_ok=none)

if test $tk_ok = sgtty; then

    AC_DEFINE(USE_SGTTY)

fi

fi

fi

AC_MSG_RESULT($tk_ok)

#--------------------------------------------------------------------

#       Include sys/select.h if it exists and if it supplies things

#       that appear to be useful and aren't already in sys/types.h.

#       This appears to be true only on the RS/6000 under AIX.  Some

#       systems like OSF/1 have a sys/select.h that's of no use, and

#       other systems like SCO UNIX have a sys/select.h that's

#       pernicious.  If "fd_set" isn't defined anywhere then set a

#       special flag.

#--------------------------------------------------------------------

AC_MSG_CHECKING([fd_set and sys/select])

AC_TRY_COMPILE([#include ],

        [fd_set readMask, writeMask;], tk_ok=yes, tk_ok=no)

if test $tk_ok = no; then

    AC_HEADER_EGREP(fd_mask, sys/select.h, tk_ok=yes)

    if test $tk_ok = yes; then

        AC_DEFINE(HAVE_SYS_SELECT_H)

    fi

fi

AC_MSG_RESULT($tk_ok)

if test $tk_ok = no; then

    AC_DEFINE(NO_FD_SET)

fi

#------------------------------------------------------------------------------

#       Find out all about time handling differences.

#------------------------------------------------------------------------------

AC_CHECK_HEADERS(sys/time.h)

AC_HEADER_TIME

AC_STRUCT_TIMEZONE

AC_MSG_CHECKING([tm_tzadj in struct tm])

AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;],

        [AC_DEFINE(HAVE_TM_TZADJ)

         AC_MSG_RESULT(yes)],

         AC_MSG_RESULT(no))

AC_MSG_CHECKING([tm_gmtoff in struct tm])

AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;],

        [AC_DEFINE(HAVE_TM_GMTOFF)

         AC_MSG_RESULT(yes)],

         AC_MSG_RESULT(no))

#

# Its important to include time.h in this check, as some systems (like convex)

# have timezone functions, etc.

#

have_timezone=no

AC_MSG_CHECKING([long timezone variable])

AC_TRY_COMPILE([#include ],

        [extern long timezone;

         timezone += 1;

         exit (0);],

        [have_timezone=yes

         AC_DEFINE(HAVE_TIMEZONE_VAR)

         AC_MSG_RESULT(yes)],

         AC_MSG_RESULT(no))

#

# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.

#

if test "$have_timezone" = no; then

   AC_MSG_CHECKING([time_t timezone variable])

   AC_TRY_COMPILE([#include ],

        [extern time_t timezone;

         timezone += 1;

         exit (0);],

        [have_timezone=yes

         AC_DEFINE(HAVE_TIMEZONE_VAR)

         AC_MSG_RESULT(yes)],

         AC_MSG_RESULT(no))

fi

#

# On some systems (eg Solaris 2.5.1, timezone is not declared in

# time.h unless you jump through hoops.  Instead of that, we just

# declare it ourselves when necessary.

#

if test "$have_timezone" = yes; then

   AC_MSG_CHECKING(for timezone declaration)

   changequote(<<,>>)

   tzrx='^[     ]*extern.*timezone'

   changequote([,])

   AC_EGREP_HEADER($tzrx, time.h, [

     AC_DEFINE(HAVE_TIMEZONE_DECL)

     AC_MSG_RESULT(found)], AC_MSG_RESULT(missing))

fi

#

# AIX does not have a timezone field in struct tm. When the AIX bsd

# library is used, the timezone global and the gettimeofday methods are

# to be avoided for timezone deduction instead, we deduce the timezone

# by comparing the localtime result on a known GMT value.

#

if test $libbsd = yes; then

    AC_DEFINE(USE_DELTA_FOR_TZ)

fi

#--------------------------------------------------------------------

#       Some systems (e.g., IRIX 4.0.5) lack the st_blksize field

#       in struct stat.

#--------------------------------------------------------------------

AC_STRUCT_ST_BLKSIZE

#--------------------------------------------------------------------

#       On some systems strstr is broken: it returns a pointer even

#       even if the original string is empty.

#--------------------------------------------------------------------

AC_MSG_CHECKING([proper strstr implementation])

AC_TRY_RUN([

extern int strstr();

int main()

{

    exit(strstr("\0test", "test") ? 1 : 0);

}

], tcl_ok=yes, tcl_ok=no, tcl_ok=no)

if test $tcl_ok = yes; then

    AC_MSG_RESULT(yes)

else

    AC_MSG_RESULT([broken, using substitute])

    LIBOBJS="$LIBOBJS strstr.o"

fi

#--------------------------------------------------------------------

#       Check for strtoul function.  This is tricky because under some

#       versions of AIX strtoul returns an incorrect terminator

#       pointer for the string "0".

#--------------------------------------------------------------------

AC_CHECK_FUNC(strtoul, tcl_ok=1, tcl_ok=0)

AC_TRY_RUN([

extern int strtoul();

int main()

{

    char *string = "0";

    char *term;

    int value;

    value = strtoul(string, &term, 0);

    if ((value != 0) || (term != (string+1))) {

        exit(1);

    }

    exit(0);

}], , tcl_ok=0, tcl_ok=0)

if test "$tcl_ok" = 0; then

    test -n "$verbose" && echo "        Adding strtoul.o."

    LIBOBJS="$LIBOBJS strtoul.o"

fi

#--------------------------------------------------------------------

#       Check for the strtod function.  This is tricky because in some

#       versions of Linux strtod mis-parses strings starting with "+".

#--------------------------------------------------------------------

AC_CHECK_FUNC(strtod, tcl_ok=1, tcl_ok=0)

AC_TRY_RUN([

extern double strtod();

int main()

{

    char *string = " +69";

    char *term;

    double value;

    value = strtod(string, &term);

    if ((value != 69) || (term != (string+4))) {

        exit(1);

    }

    exit(0);

}], , tcl_ok=0, tcl_ok=0)

if test "$tcl_ok" = 0; then

    test -n "$verbose" && echo "        Adding strtod.o."

    LIBOBJS="$LIBOBJS strtod.o"

fi

#--------------------------------------------------------------------

#       Under Solaris 2.4, strtod returns the wrong value for the

#       terminating character under some conditions.  Check for this

#       and if the problem exists use a substitute procedure

#       "fixstrtod" that corrects the error.

#--------------------------------------------------------------------

AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)

if test "$tcl_strtod" = 1; then

    AC_MSG_CHECKING([for Solaris strtod bug])

    AC_TRY_RUN([

extern double strtod();

int main()

{

    char *string = "NaN";

    char *term;

    strtod(string, &term);

    if ((term != string) && (term[-1] == 0)) {

        exit(1);

    }

    exit(0);

}], tcl_ok=1, tcl_ok=0, tcl_ok=0)

    if test $tcl_ok = 1; then

        AC_MSG_RESULT(ok)

    else

        AC_MSG_RESULT(buggy)

        LIBOBJS="$LIBOBJS fixstrtod.o"

        AC_DEFINE(strtod, fixstrtod)

    fi

fi

#--------------------------------------------------------------------

#       Check for various typedefs and provide substitutes if

#       they don't exist.

#--------------------------------------------------------------------

AC_TYPE_MODE_T

AC_TYPE_PID_T

AC_TYPE_SIZE_T

AC_TYPE_UID_T

#--------------------------------------------------------------------

#       If a system doesn't have an opendir function (man, that's old!)

#       then we have to supply a different version of dirent.h which

#       is compatible with the substitute version of opendir that's

#       provided.  This version only works with V7-style directories.

#--------------------------------------------------------------------

AC_CHECK_FUNC(opendir, , AC_DEFINE(USE_DIRENT2_H))

#--------------------------------------------------------------------

#       The check below checks whether  defines the type

#       "union wait" correctly.  It's needed because of weirdness in

#       HP-UX where "union wait" is defined in both the BSD and SYS-V

#       environments.  Checking the usability of WIFEXITED seems to do

#       the trick.

#--------------------------------------------------------------------

AC_MSG_CHECKING([union wait])

AC_TRY_LINK([#include 

#include ], [

union wait x;

WIFEXITED(x);           /* Generates compiler error if WIFEXITED

                         * uses an int. */

], tcl_ok=yes, tcl_ok=no)

AC_MSG_RESULT($tcl_ok)

if test $tcl_ok = no; then

    AC_DEFINE(NO_UNION_WAIT)

fi

#--------------------------------------------------------------------

#       Check to see whether the system supports the matherr function

#       and its associated type "struct exception".

#--------------------------------------------------------------------

AC_MSG_CHECKING([matherr support])

AC_TRY_COMPILE([#include ], [

struct exception x;

x.type = DOMAIN;

x.type = SING;

], tcl_ok=yes, tcl_ok=no)

AC_MSG_RESULT($tcl_ok)

if test $tcl_ok = yes; then

    AC_DEFINE(NEED_MATHERR)

fi

#--------------------------------------------------------------------

#       Check to see whether the system provides a vfork kernel call.

#       If not, then use fork instead.  Also, check for a problem with

#       vforks and signals that can cause core dumps if a vforked child

#       resets a signal handler.  If the problem exists, then use fork

#       instead of vfork.

#--------------------------------------------------------------------

AC_TYPE_SIGNAL()

AC_CHECK_FUNC(vfork, tcl_ok=1, tcl_ok=0)

if test "$tcl_ok" = 1; then

    AC_MSG_CHECKING([vfork/signal bug]);

    AC_TRY_RUN([

#include 

#include 

#include 

int gotSignal = 0;

sigProc(sig)

    int sig;

{

    gotSignal = 1;

}

main()

{

    int pid, sts;

    (void) signal(SIGCHLD, sigProc);

    pid = vfork();

    if (pid <  0) {

        exit(1);

    } else if (pid == 0) {

        (void) signal(SIGCHLD, SIG_DFL);

        _exit(0);

    } else {

        (void) wait(&sts);

    }

    exit((gotSignal) ? 0 : 1);

}], tcl_ok=1, tcl_ok=0, tcl_ok=0)

    if test "$tcl_ok" = 1; then

        AC_MSG_RESULT(ok)

    else

        AC_MSG_RESULT([buggy, using fork instead])

    fi

fi

rm -f core

if test "$tcl_ok" = 0; then

    AC_DEFINE(vfork, fork)

fi

#--------------------------------------------------------------------

#       Check whether there is an strncasecmp function on this system.

#       This is a bit tricky because under SCO it's in -lsocket and

#       under Sequent Dynix it's in -linet.

#--------------------------------------------------------------------

AC_CHECK_FUNC(strncasecmp, tcl_ok=1, tcl_ok=0)

if test "$tcl_ok" = 0; then

    AC_CHECK_LIB(socket, strncasecmp, tcl_ok=1, tcl_ok=0)

fi

if test "$tcl_ok" = 0; then

    AC_CHECK_LIB(inet, strncasecmp, tcl_ok=1, tcl_ok=0)

fi

if test "$tcl_ok" = 0; then

    LIBOBJS="$LIBOBJS strncasecmp.o"

fi

#--------------------------------------------------------------------

#       The code below deals with several issues related to gettimeofday:

#       1. Some systems don't provide a gettimeofday function at all

#          (set NO_GETTOD if this is the case).

#       2. SGI systems don't use the BSD form of the gettimeofday function,

#          but they have a BSDgettimeofday function that can be used instead.

#       3. See if gettimeofday is declared in the  header file.

#          if not, set the GETTOD_NOT_DECLARED flag so that tclPort.h can

#          declare it.

#--------------------------------------------------------------------

AC_CHECK_FUNC(BSDgettimeofday, AC_DEFINE(HAVE_BSDGETTIMEOFDAY),

        AC_CHECK_FUNC(gettimeofday, , AC_DEFINE(NO_GETTOD)))

AC_MSG_CHECKING([for gettimeofday declaration])

AC_EGREP_HEADER(gettimeofday, sys/time.h, AC_MSG_RESULT(present), [

    AC_MSG_RESULT(missing)

    AC_DEFINE(GETTOD_NOT_DECLARED)

])

#--------------------------------------------------------------------

#       Interactive UNIX requires -linet instead of -lsocket, plus it

#       needs net/errno.h to define the socket-related error codes.

#--------------------------------------------------------------------

AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])

AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H))

#--------------------------------------------------------------------

#       The following code checks to see whether it is possible to get

#       signed chars on this platform.  This is needed in order to

#       properly generate sign-extended ints from character values.

#--------------------------------------------------------------------

AC_C_CHAR_UNSIGNED

AC_MSG_CHECKING([signed char declarations])

AC_TRY_COMPILE(, [

signed char *p;

p = 0;

], tcl_ok=yes, tcl_ok=no)

AC_MSG_RESULT($tcl_ok)

if test $tcl_ok = yes; then

    AC_DEFINE(HAVE_SIGNED_CHAR)

fi

#--------------------------------------------------------------------

#       Check for the existence of the -lsocket and -lnsl libraries.

#       The order here is important, so that they end up in the right

#       order in the command line generated by make.  Here are some

#       special considerations:

#       1. Use "connect" and "accept" to check for -lsocket, and

#          "gethostbyname" to check for -lnsl.

#       2. Use each function name only once:  can't redo a check because

#          autoconf caches the results of the last check and won't redo it.

#       3. Use -lnsl and -lsocket only if they supply procedures that

#          aren't already present in the normal libraries.  This is because

#          IRIX 5.2 has libraries, but they aren't needed and they're

#          bogus:  they goof up name resolution if used.

#       4. On some SVR4 systems, can't use -lsocket without -lnsl too.

#          To get around this problem, check for both libraries together

#          if -lsocket doesn't work by itself.

#--------------------------------------------------------------------

# CYGNUS LOCAL: Store any socket library(ies) in the cache, and don't

# mess up the cache values of the functions we check for.

AC_CACHE_CHECK([for socket libraries], tcl_cv_lib_sockets,

 [tcl_cv_lib_sockets=

  tcl_checkBoth=0

  unset ac_cv_func_connect

  AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)

  if test "$tcl_checkSocket" = 1; then

      unset ac_cv_func_connect

      AC_CHECK_LIB(socket, main, tcl_cv_lib_sockets="-lsocket",

                   tcl_checkBoth=1)

  fi

  if test "$tcl_checkBoth" = 1; then

      tcl_oldLibs=$LIBS

      LIBS="$LIBS -lsocket -lnsl"

      unset ac_cv_func_accept

      AC_CHECK_FUNC(accept,

                    [tcl_checkNsl=0

                     tcl_cv_lib_sockets="-lsocket -lnsl"])

      unset ac_cv_func_accept

      LIBS=$tcl_oldLibs

  fi

  unset ac_cv_func_gethostbyname

  tcl_oldLibs=$LIBS

  LIBS="$LIBS $tcl_cv_lib_sockets"

  AC_CHECK_FUNC(gethostbyname, ,

                [AC_CHECK_LIB(nsl, main,

                              [tcl_cv_lib_sockets="$tcl_cv_lib_sockets -lnsl"])])

  unset ac_cv_func_gethostbyname

  LIBS=$tcl_oldLIBS

])

test -z "$tcl_cv_lib_sockets" || LIBS="$LIBS $tcl_cv_lib_sockets"

#--------------------------------------------------------------------

#       The statements below define a collection of symbols related to

#       dynamic loading and shared libraries:

#

#       DL_OBJS -       Name of the object file that implements dynamic

#                       loading for Tcl on this system.

#       DL_LIBS -       Library file(s) to include in tclsh and other base

#                       applications in order for the "load" command to work.

#       LD_FLAGS -      Flags to pass to the compiler when linking object

#                       files into an executable application binary such

#                       as tclsh.

#       LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",

#                       that tell the run-time dynamic linker where to look

#                       for shared libraries such as libtcl.so.  Depends on

#                       the variable LIB_RUNTIME_DIR in the Makefile.

#       MAKE_LIB -      Command to execute to build the Tcl library;

#                       differs depending on whether or not Tcl is being

#                       compiled as a shared library.

#       SHLIB_CFLAGS -  Flags to pass to cc when compiling the components

#                       of a shared library (may request position-independent

#                       code, among other things).

#       SHLIB_LD -      Base command to use for combining object files

#                       into a shared library.

#       SHLIB_LD_LIBS - Dependent libraries for the linker to scan when

#                       creating shared libraries.  This symbol typically

#                       goes at the end of the "ld" commands that build

#                       shared libraries. The value of the symbol is

#                       "${LIBS}" if all of the dependent libraries should

#                       be specified when creating a shared library.  If

#                       dependent libraries should not be specified (as on

#                       SunOS 4.x, where they cause the link to fail, or in

#                       general if Tcl and Tk aren't themselves shared

#                       libraries), then this symbol has an empty string

#                       as its value.

#       SHLIB_SUFFIX -  Suffix to use for the names of dynamically loadable

#                       extensions.  An empty string means we don't know how

#                       to use shared libraries on this platform.

#       TCL_LIB_FILE -  Name of the file that contains the Tcl library, such

#                       as libtcl7.8.so or libtcl7.8.a.

#       TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl"

#                       in the shared library name, using the $VERSION variable

#                       to put the version in the right place.  This is used

#                       by platforms that need non-standard library names.

#                       Examples:  ${VERSION}.so.1.1 on NetBSD, since it needs

#                       to have a version after the .so, and ${VERSION}.a

#                       on AIX, since the Tcl shared library needs to have

#                       a .a extension whereas shared objects for loadable

#                       extensions have a .so extension.  Defaults to

#                       ${VERSION}${SHLIB_SUFFIX}.

#--------------------------------------------------------------------

# Step 1: set the variable "system" to hold the name and version number

# for the system.  This can usually be done via the "uname" command, but

# there are a few systems, like Next, where this doesn't work.

AC_MSG_CHECKING([system version (for dynamic loading)])

if test -f /usr/lib/NextStep/software_version; then

    system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`

else

    system=`uname -s`-`uname -r`

    if test "$?" -ne 0 ; then

        AC_MSG_RESULT([unknown (can't find uname command)])

        system=unknown

    else

        # Special check for weird MP-RAS system (uname returns weird

        # results, and the version is kept in special file).

        if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then

            system=MP-RAS-`awk '{print $3}' /etc/.relid'`

        fi

        if test "`uname -s`" = "AIX" ; then

            system=AIX-`uname -v`.`uname -r`

        fi

        AC_MSG_RESULT($system)

    fi

fi

# Step 2: check for existence of -ldl library.  This is needed because

# Linux can use either -ldl or -ldld for dynamic loading.

AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)

# Step 3: set configuration options based on system name and version.

fullSrcDir=`cd $srcdir; pwd`

TCL_SHARED_LIB_SUFFIX=""

TCL_UNSHARED_LIB_SUFFIX=""

TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`'

ECHO_VERSION='`echo ${VERSION}`'

TCL_LIB_VERSIONS_OK=ok

case $system in

    AIX-4.[[2-9]])

        SHLIB_CFLAGS=""

        SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry"

        SHLIB_LD_LIBS='${LIBS}'

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS="-ldl"

        LD_FLAGS=""

        LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

        AIX=yes

        TCL_SHARED_LIB_SUFFIX='${VERSION}.a'

        ;;

    AIX-*)

        SHLIB_CFLAGS=""

        SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry"

        SHLIB_LD_LIBS='${LIBS}'

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o tclLoadAix.o"

        DL_LIBS="-lld"

        LD_FLAGS=""

        LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

        TCL_SHARED_LIB_SUFFIX='${VERSION}.a'

        ;;

    BSD/OS-2.1*|BSD/OS-3*)

        SHLIB_CFLAGS=""

        SHLIB_LD="shlicc -r"

        SHLIB_LD_LIBS='${LIBS}'

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS="-ldl"

        LD_FLAGS=""

        LD_SEARCH_FLAGS=""

        ;;

    dgux*)

        SHLIB_CFLAGS="-K PIC"

        SHLIB_LD="cc -G"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS="-ldl"

        LD_FLAGS=""

        LD_SEARCH_FLAGS=""

        ;;

    HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*|HP-UX-*.11.*)

        # CYGNUS LOCAL: Handle gcc and versions of HP-UX that can't

        # do dynamic linking.

        AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)

        if test "$tcl_ok" = "yes"; then

           if test "$GCC" = yes; then

              SHLIB_CFLAGS="-fPIC"

              SHLIB_LD="$CC -shared -fPIC"

           else

              SHLIB_CFLAGS="+z"

              SHLIB_LD="ld -b"

           fi

           SHLIB_LD_LIBS=""

           SHLIB_SUFFIX=".sl"

           DL_OBJS="tclLoadShl.o"

           DL_LIBS="-ldld"

           # The GNU linker requires the -export-dynamic

           # option to make all symbols visible in the dynamic symbol

           # table.  Note that the HP linker will give errors

           # -export-dynamic, but will still exit successfully.

           # Adding a -L option will make it fail.

           hold_ldflags=$LDFLAGS

           AC_MSG_CHECKING(for the ld -export-dynamic flag)

           LDFLAGS="${LDFLAGS} -Wl,-export-dynamic -L`pwd`"

           AC_TRY_LINK(, [int i;], found=yes, found=no)

           LDFLAGS=$hold_ldflags

           AC_MSG_RESULT($found)

           if test $found = yes; then

              LD_FLAGS="-Wl,-export-dynamic"

              LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

           else

              LD_FLAGS="-Wl,-E"

              LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'

           fi

        fi

        # END CYGNUS LOCAL

        ;;

    IRIX-4.*)

        SHLIB_CFLAGS="-G 0"

        SHLIB_SUFFIX=".a"

        SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"

        SHLIB_LD_LIBS='${LIBS}'

        DL_OBJS="tclLoadAout.o"

        DL_LIBS=""

        LD_FLAGS="-Wl,-D,08000000"

        LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

        TCL_SHARED_LIB_SUFFIX='${VERSION}.a'

        ;;

    IRIX-5.*|IRIX-6.*)

        SHLIB_CFLAGS=""

        SHLIB_LD="ld -n32 -shared -rdata_shared"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS=""

        LD_FLAGS=""

        LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

        ;;

    IRIX64-6.*)

        SHLIB_CFLAGS=""

        SHLIB_LD="ld -n32 -shared -rdata_shared -rpath /usr/local/lib"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS=""

        LD_FLAGS=""

        LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'

        ;;

    Linux*)

        SHLIB_CFLAGS="-fPIC"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        if test "$have_dl" = yes; then

            SHLIB_LD="${CC} -shared"

            DL_OBJS="tclLoadDl.o"

            DL_LIBS="-ldl"

            LD_FLAGS="-rdynamic"

            LD_SEARCH_FLAGS=""

        else

            AC_CHECK_HEADER(dld.h, [

                SHLIB_LD="ld -shared"

                DL_OBJS="tclLoadDld.o"

                DL_LIBS="-ldld"

                LD_FLAGS=""

                LD_SEARCH_FLAGS=""])

        fi

        ;;

    MP-RAS-02*)

        SHLIB_CFLAGS="-K PIC"

        SHLIB_LD="cc -G"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS="-ldl"

        LD_FLAGS=""

        LD_SEARCH_FLAGS=""

        ;;

    MP-RAS-*)

        SHLIB_CFLAGS="-K PIC"

        SHLIB_LD="cc -G"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadDl.o"

        DL_LIBS="-ldl"

        LD_FLAGS="-Wl,-Bexport"

        LD_SEARCH_FLAGS=""

        ;;

    NetBSD-*|FreeBSD-*|OpenBSD-*)

        # Not available on all versions:  check for include file.

        AC_CHECK_HEADER(dlfcn.h, [

            SHLIB_CFLAGS="-fpic"

            SHLIB_LD="ld -Bshareable -x"

            SHLIB_LD_LIBS=""

            SHLIB_SUFFIX=".so"

            DL_OBJS="tclLoadDl.o"

            DL_LIBS=""

            LD_FLAGS=""

            LD_SEARCH_FLAGS=""

            TCL_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.so.1.0'

        ], [

            SHLIB_CFLAGS=""

            SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r"

            SHLIB_LD_LIBS='${LIBS}'

            SHLIB_SUFFIX=".a"

            DL_OBJS="tclLoadAout.o"

            DL_LIBS=""

            LD_FLAGS=""

            LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'

            TCL_SHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a'

        ])

        # FreeBSD doesn't handle version numbers with dots.

        TCL_UNSHARED_LIB_SUFFIX='`echo ${VERSION} | tr -d .`.a'

        TCL_LIB_VERSIONS_OK=nodots

        ;;

    NEXTSTEP-*)

        SHLIB_CFLAGS=""

        SHLIB_LD="cc -nostdlib -r"

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadNext.o"

        DL_LIBS=""

        LD_FLAGS=""

        LD_SEARCH_FLAGS=""

        ;;

    OSF1-1.0|OSF1-1.1|OSF1-1.2)

        # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1

        SHLIB_CFLAGS=""

        # Hack: make package name same as library name

        SHLIB_LD='ld -R -export $@:'

        SHLIB_LD_LIBS=""

        SHLIB_SUFFIX=".so"

        DL_OBJS="tclLoadOSF.o"

        DL_LIBS=""

        LD_FLAGS=""

        LD_SEARCH_FLAGS=""

        ;;

    OSF1-1.*)

        # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2

        SHLIB_CFLAGS="-fpic"