URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [orp/] [orp_soc/] [rtl/] [verilog/] [mem_if/] [sram_top.v] - Blame information for rev 978

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  XESS SRAM interface                                         ////
////                                                              ////
////  This file is part of the OR1K test application              ////
////  http://www.opencores.org/cores/or1k/                        ////
////                                                              ////
////  Description                                                 ////
////  Connects the SoC to SRAM. It does RMW for byte accesses     ////
////  because XSV board has WEs on a 16-bit basis.                ////
////                                                              ////
////  To Do:                                                      ////
////   - nothing really                                           ////
////                                                              ////
////  Author(s):                                                  ////
////      - Simon Srot, simons@opencores.org                      ////
////      - Igor Mohor, igorm@opencores.org                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2001 Authors                                   ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.3  2002/08/14 06:24:43  lampret
// Fixed size of generic flash/sram to exactly 2MB
//
// Revision 1.2  2002/08/12 05:34:06  lampret
// Added SRAM_GENERIC
//
// Revision 1.1.1.1  2002/03/21 16:55:44  lampret
// First import of the "new" XESS XSV environment.
//
//
// Revision 1.3  2002/01/23 07:50:44  lampret
// Added wb_err_o to flash and sram i/f for testing the buserr exception.
//
// Revision 1.2  2002/01/14 06:18:22  lampret
// Fixed mem2reg bug in FAST implementation. Updated debug unit to work with new genpc/if.
//
// Revision 1.1.1.1  2001/11/04 19:00:09  lampret
// First import.
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
 
`define SRAM_GENERIC
 
`ifdef SRAM_GENERIC
 
module sram_top (
  wb_clk_i, wb_rst_i,
 
  wb_dat_i, wb_dat_o, wb_adr_i, wb_sel_i, wb_we_i, wb_cyc_i,
  wb_stb_i, wb_ack_o, wb_err_o,
 
  r_cen, r0_wen, r1_wen, r_oen, r_a, r_d_i, r_d_o, d_oe,
  l_cen, l0_wen, l1_wen, l_oen, l_a, l_d_i, l_d_o
);
 
//
// Paraneters
//
parameter               aw = 19;
 
//
// I/O Ports
//
input                   wb_clk_i;
input                   wb_rst_i;
 
//
// WB slave i/f
//
input   [31:0]           wb_dat_i;
output  [31:0]           wb_dat_o;
input   [31:0]           wb_adr_i;
input   [3:0]            wb_sel_i;
input                   wb_we_i;
input                   wb_cyc_i;
input                   wb_stb_i;
output                  wb_ack_o;
output                  wb_err_o;
 
//
// Right SRAM bank
//
output                  r_oen;
output                  r0_wen;
output                  r1_wen;
output                  r_cen;
input   [15:0]           r_d_i;
output  [15:0]           r_d_o;
output  [aw-1:0] r_a;
 
//
// Left SRAM bank
//
output                  l_oen;
output                  l0_wen;
output                  l1_wen;
output                  l_cen;
input   [15:0]           l_d_i;
output  [15:0]           l_d_o;
output  [aw-1:0] l_a;
 
//
// Common SRAM signals
//
output                  d_oe;
 
//
// Internal wires and regs
//
reg     [7:0]           mem [2097151:0];
wire    [31:0]          adr;
`ifdef SRAM_GENERIC_REGISTERED
reg                     wb_err_o;
reg     [31:0]           prev_adr;
reg     [1:0]            delay;
`else
wire    [1:0]            delay;
`endif
wire                    wb_err;
 
//
// Aliases and simple assignments
//
assign wb_err = wb_cyc_i & wb_stb_i & (|wb_adr_i[23:21]);     // If Access to > 2MB (8-bit leading prefix ignored)
assign adr = {8'h00, wb_adr_i[23:2], 2'b00};
 
//
// Reading from SRAM model
//
assign wb_dat_o[7:0] = mem[adr+3];
assign wb_dat_o[15:8] = mem[adr+2];
assign wb_dat_o[23:16] = mem[adr+1];
assign wb_dat_o[31:24] = mem[adr+0];
 
//
// Writing to SRAM model
//
always @(posedge wb_rst_i or posedge wb_clk_i)
        if (wb_cyc_i & wb_stb_i & wb_we_i) begin
                if (wb_sel_i[0])
                        mem[adr+3] <= #1 wb_dat_i[7:0];
                if (wb_sel_i[1])
                        mem[adr+2] <= #1 wb_dat_i[15:8];
                if (wb_sel_i[2])
                        mem[adr+1] <= #1 wb_dat_i[23:16];
                if (wb_sel_i[3])
                        mem[adr+0] <= #1 wb_dat_i[31:24];
        end
 
`ifdef SRAM_GENERIC_REGISTERED
//
// WB Acknowledge
//
always @(posedge wb_clk_i or posedge wb_rst_i)
        if (wb_rst_i) begin
                delay <= #1 2'd3;
                prev_adr <= #1 32'h0000_0000;
        end
        else if (delay && (wb_adr_i == prev_adr) && wb_cyc_i && wb_stb_i)
                delay <= #1 delay - 2'd1;
        else if (wb_ack_o || (wb_adr_i != prev_adr) || ~wb_stb_i) begin
                delay <= #1 2'd3;       // delay ... can range from 3 to 0
                prev_adr <= #1 wb_adr_i;
        end
`else
assign delay = 2'd0;
`endif
 
assign wb_ack_o = wb_cyc_i & wb_stb_i & (delay == 2'd0)
`ifdef SRAM_GENERIC_REGISTERED
        & (wb_adr_i == prev_adr)
`endif
        ;
 
`ifdef SRAM_GENERIC_REGISTERED
//
// WB Error
//
always @(posedge wb_clk_i or posedge wb_rst_i)
        if (wb_rst_i)
                wb_err_o <= #1 1'b0;
        else
                wb_err_o <= #1 wb_err & !wb_err_o;
`else
assign wb_err_o = wb_err;
`endif
 
//
// SRAM i/f monitor
//
// synopsys translate_off
integer fsram;
initial fsram = $fopen("sram.log");
always @(posedge wb_clk_i)
        if (wb_cyc_i)
                if (wb_stb_i & wb_we_i) begin
                        if (wb_sel_i[3])
                                mem[{wb_adr_i[23:2], 2'b00}+0] = wb_dat_i[31:24];
                        if (wb_sel_i[2])
                                mem[{wb_adr_i[23:2], 2'b00}+1] = wb_dat_i[23:16];
                        if (wb_sel_i[1])
                                mem[{wb_adr_i[23:2], 2'b00}+2] = wb_dat_i[15:8];
                        if (wb_sel_i[0])
                                mem[{wb_adr_i[23:2], 2'b00}+3] = wb_dat_i[7:0];
                        $fdisplay(fsram, "%t [%h] <- write %h, byte sel %b", $time, wb_adr_i, wb_dat_i, wb_sel_i);
                end else if (wb_ack_o)
                        $fdisplay(fsram, "%t [%h] -> read %h", $time, wb_adr_i, wb_dat_o);
// synopsys translate_on
 
endmodule
 
`else
 
module sram_top (
  wb_clk_i, wb_rst_i,
 
  wb_dat_i, wb_dat_o, wb_adr_i, wb_sel_i, wb_we_i, wb_cyc_i,
  wb_stb_i, wb_ack_o, wb_err_o,
 
  r_cen, r0_wen, r1_wen, r_oen, r_a, r_d_i, r_d_o, d_oe,
  l_cen, l0_wen, l1_wen, l_oen, l_a, l_d_i, l_d_o
);
 
//
// Paraneters
//
parameter               aw = 19;
 
//
// I/O Ports
//
input                   wb_clk_i;
input                   wb_rst_i;
 
//
// WB slave i/f
//
input   [31:0]           wb_dat_i;
output  [31:0]           wb_dat_o;
input   [31:0]           wb_adr_i;
input   [3:0]            wb_sel_i;
input                   wb_we_i;
input                   wb_cyc_i;
input                   wb_stb_i;
output                  wb_ack_o;
output                  wb_err_o;
 
//
// Right SRAM bank
//
output                  r_oen;
output                  r0_wen;
output                  r1_wen;
output                  r_cen;
input   [15:0]           r_d_i;
output  [15:0]           r_d_o;
output  [aw-1:0] r_a;
 
//
// Left SRAM bank
//
output                  l_oen;
output                  l0_wen;
output                  l1_wen;
output                  l_cen;
input   [15:0]           l_d_i;
output  [15:0]           l_d_o;
output  [aw-1:0] l_a;
 
//
// Common SRAM signals
//
output                  d_oe;
 
//
// Internal regs and wires
//
reg     [15:0]           r_data;
reg     [15:0]           l_data;
reg                     l0_wen;
wire                    l1_wen = l0_wen;
reg                     r0_wen;
wire                    r1_wen = r0_wen;
reg     [31:0]           latch_data;
reg                     ack_we;
wire                    l_oe;
wire                    r_oe;
wire                    r_ack;
reg                     Mux;
reg     [aw-1:0] LatchedAddr;
reg     [15:0]           l_read;
reg     [15:0]           r_read;
reg                     d_oe;
reg     [15:0]           l_mux;
reg     [15:0]           r_mux;
 
//
// Aliases and simple assignments
//
assign wb_dat_o = {r_d_i, l_d_i};
assign l_oen = ~l_oe;
assign r_oen = ~r_oe;
assign l_a = Mux ? LatchedAddr : wb_adr_i[aw+1:2];
assign r_a = l_a;
assign l_d_o = l_mux;
assign r_d_o = r_mux;
assign l_oe = wb_cyc_i & wb_stb_i & l0_wen;
assign r_oe = wb_cyc_i & wb_stb_i & r0_wen;
assign l_cen = ~(wb_cyc_i & wb_stb_i);
assign r_cen = l_cen;
assign wb_ack_o = (wb_cyc_i & wb_stb_i & ~wb_we_i) | ack_we;
assign wb_err_o = wb_cyc_i & wb_stb_i & (|wb_adr_i[27:21]);     // If Access to > 2MB (4-bit leading prefix ignored)
 
//
// RMW mux control
//
always @ (negedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    Mux <= 1'b0;
  else
  if (ack_we)
    Mux <= #1 1'b1;
  else
    Mux <= #1 1'b0;
end
 
//
// Latch address
//
always @ (negedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    LatchedAddr <= 'h0;
  else
  if (wb_cyc_i & wb_stb_i)
    LatchedAddr <= #1 wb_adr_i[aw+1:2];
end
 
//
// Latch data from RAM (read data)
//
always @ (posedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    begin
      l_read <= 16'h0;
      r_read <= 16'h0;
    end
  else
  if (wb_cyc_i & wb_stb_i)
    begin
      l_read <= #1 l_d_i[15:0];
      r_read <= #1 r_d_i[15:0];
    end
end
 
//
// Mux and latch data for writing left SRAM bank (bytes 0 and 1)
//
always @ (negedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    l_mux <= 16'h0;
  else
  if (~l0_wen)
    begin
      if (wb_sel_i[0])
        l_mux[7:0]  <= #1 wb_dat_i[7:0];
      else
        l_mux[7:0]  <= #1 l_read[7:0];
      if (wb_sel_i[1])
        l_mux[15:8] <= #1 wb_dat_i[15:8];
      else
        l_mux[15:8] <= #1 l_read[15:8];
    end
  else
    l_mux[15:0]  <= #1 16'hz;
end
 
//
// Mux and latch data for writing right SRAM bank (bytes 2 and 3)
//
always @ (negedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    r_mux <= 16'h0;
  else
  if (~r0_wen)
    begin
      if (wb_sel_i[2])
        r_mux[7:0]  <= #1 wb_dat_i[23:16];
      else
        r_mux[7:0]  <= #1 r_read[7:0];
      if (wb_sel_i[3])
        r_mux[15:8]  <= #1 wb_dat_i[31:24];
      else
        r_mux[15:8]  <= #1 r_read[15:8];
    end
  else
    r_mux <= #1 16'hz;
end
 
//
// Left WE
//
always @ (posedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    l0_wen <= 1'b1;
  else
  if (wb_cyc_i & wb_stb_i & wb_we_i & (|wb_sel_i[1:0]) & ~wb_ack_o)
    l0_wen <= #1 1'b0;
  else
    l0_wen <= #1 1'b1;
end
 
//
// Right WE
//
always @ (posedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    r0_wen <= 1'b1;
  else
  if (wb_cyc_i & wb_stb_i & wb_we_i & (|wb_sel_i[3:2]) & ~wb_ack_o)
    r0_wen <= #1 1'b0;
  else
    r0_wen <= #1 1'b1;
end
 
//
// Write acknowledge
//
always @ (posedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    ack_we <= 1'b0;
  else
  if (wb_cyc_i & wb_stb_i & wb_we_i & ~ack_we)
    ack_we <= #1 1'b1;
  else
    ack_we <= #1 1'b0;
end
 
//
// Generate d_oe signal (tristate control)
//
always @ (negedge wb_clk_i or posedge wb_rst_i)
begin
  if (wb_rst_i)
    d_oe <= 1'b0;
  else
  if (~l0_wen | ~r0_wen)
    d_oe <= 1'b1;
  else
    d_oe <= 1'b0;
end
 
//
// SRAM i/f monitor
//
// synopsys translate_off
integer fsram;
initial fsram = $fopen("sram.log");
always @(posedge wb_clk_i)
begin
  if (~l0_wen | ~r0_wen)
    $fdisplay(fsram, "%t [%h] <- write %h", $time, wb_adr_i, {r_d_o, l_d_o});
  else
  if ((l_oe | r_oe) & ~wb_we_i)
    $fdisplay(fsram, "%t [%h] -> read %h", $time, wb_adr_i, {r_d_i, l_d_i});
end
// synopsys translate_on
 
endmodule
 
`endif

Line No.	Rev	Author	Line
1	746	lampret	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// XESS SRAM interface ////`
4			`//// ////`
5			`//// This file is part of the OR1K test application ////`
6			`//// http://www.opencores.org/cores/or1k/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// Connects the SoC to SRAM. It does RMW for byte accesses ////`
10			`//// because XSV board has WEs on a 16-bit basis. ////`
11			`//// ////`
12			`//// To Do: ////`
13			`//// - nothing really ////`
14			`//// ////`
15			`//// Author(s): ////`
16			`//// - Simon Srot, simons@opencores.org ////`
17			`//// - Igor Mohor, igorm@opencores.org ////`
18			`//// ////`
19			`//////////////////////////////////////////////////////////////////////`
20			`//// ////`
21			`//// Copyright (C) 2001 Authors ////`
22			`//// ////`
23			`//// This source file may be used and distributed without ////`
24			`//// restriction provided that this copyright statement is not ////`
25			`//// removed from the file and that any derivative work contains ////`
26			`//// the original copyright notice and the associated disclaimer. ////`
27			`//// ////`
28			`//// This source file is free software; you can redistribute it ////`
29			`//// and/or modify it under the terms of the GNU Lesser General ////`
30			`//// Public License as published by the Free Software Foundation; ////`
31			`//// either version 2.1 of the License, or (at your option) any ////`
32			`//// later version. ////`
33			`//// ////`
34			`//// This source is distributed in the hope that it will be ////`
35			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
36			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
37			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
38			`//// details. ////`
39			`//// ////`
40			`//// You should have received a copy of the GNU Lesser General ////`
41			`//// Public License along with this source; if not, download it ////`
42			`//// from http://www.opencores.org/lgpl.shtml ////`
43			`//// ////`
44			`//////////////////////////////////////////////////////////////////////`
45			`//`
46			`// CVS Revision History`
47			`//`
48			`// $Log: not supported by cvs2svn $`
49	978	lampret	`// Revision 1.3 2002/08/14 06:24:43 lampret`
50			`// Fixed size of generic flash/sram to exactly 2MB`
51			`//`
52	959	lampret	`// Revision 1.2 2002/08/12 05:34:06 lampret`
53			`// Added SRAM_GENERIC`
54			`//`
55	946	lampret	`// Revision 1.1.1.1 2002/03/21 16:55:44 lampret`
56			`// First import of the "new" XESS XSV environment.`
57			`//`
58			`//`
59	746	lampret	`// Revision 1.3 2002/01/23 07:50:44 lampret`
60			`// Added wb_err_o to flash and sram i/f for testing the buserr exception.`
61			`//`
62			`// Revision 1.2 2002/01/14 06:18:22 lampret`
63			`// Fixed mem2reg bug in FAST implementation. Updated debug unit to work with new genpc/if.`
64			`//`
65			`// Revision 1.1.1.1 2001/11/04 19:00:09 lampret`
66			`// First import.`
67			`//`
68			`//`
69
70			`// synopsys translate_off`
71			`include "timescale.v"
72			`// synopsys translate_on`
73
74	946	lampret	`define SRAM_GENERIC
75
76			`ifdef SRAM_GENERIC
77
78	746	lampret	`module sram_top (`
79			`wb_clk_i, wb_rst_i,`
80
81			`wb_dat_i, wb_dat_o, wb_adr_i, wb_sel_i, wb_we_i, wb_cyc_i,`
82			`wb_stb_i, wb_ack_o, wb_err_o,`
83
84			`r_cen, r0_wen, r1_wen, r_oen, r_a, r_d_i, r_d_o, d_oe,`
85			`l_cen, l0_wen, l1_wen, l_oen, l_a, l_d_i, l_d_o`
86			`);`
87
88			`//`
89			`// Paraneters`
90			`//`
91			`parameter aw = 19;`
92
93			`//`
94			`// I/O Ports`
95			`//`
96			`input wb_clk_i;`
97			`input wb_rst_i;`
98
99			`//`
100			`// WB slave i/f`
101			`//`
102			`input [31:0] wb_dat_i;`
103			`output [31:0] wb_dat_o;`
104			`input [31:0] wb_adr_i;`
105			`input [3:0] wb_sel_i;`
106			`input wb_we_i;`
107			`input wb_cyc_i;`
108			`input wb_stb_i;`
109			`output wb_ack_o;`
110			`output wb_err_o;`
111
112			`//`
113			`// Right SRAM bank`
114			`//`
115			`output r_oen;`
116			`output r0_wen;`
117			`output r1_wen;`
118			`output r_cen;`
119			`input [15:0] r_d_i;`
120			`output [15:0] r_d_o;`
121			`output [aw-1:0] r_a;`
122
123			`//`
124			`// Left SRAM bank`
125			`//`
126			`output l_oen;`
127			`output l0_wen;`
128			`output l1_wen;`
129			`output l_cen;`
130			`input [15:0] l_d_i;`
131			`output [15:0] l_d_o;`
132			`output [aw-1:0] l_a;`
133
134			`//`
135			`// Common SRAM signals`
136			`//`
137			`output d_oe;`
138
139			`//`
140	946	lampret	`// Internal wires and regs`
141			`//`
142	959	lampret	`reg [7:0] mem [2097151:0];`
143	946	lampret	`wire [31:0] adr;`
144			`ifdef SRAM_GENERIC_REGISTERED
145			`reg wb_err_o;`
146	978	lampret	`reg [31:0] prev_adr;`
147			`reg [1:0] delay;`
148			`else
149			`wire [1:0] delay;`
150	946	lampret	`endif
151			`wire wb_err;`
152
153			`//`
154			`// Aliases and simple assignments`
155			`//`
156			`assign wb_err = wb_cyc_i & wb_stb_i & (\|wb_adr_i[23:21]); // If Access to > 2MB (8-bit leading prefix ignored)`
157			`assign adr = {8'h00, wb_adr_i[23:2], 2'b00};`
158
159			`//`
160			`// Reading from SRAM model`
161			`//`
162			`assign wb_dat_o[7:0] = mem[adr+3];`
163			`assign wb_dat_o[15:8] = mem[adr+2];`
164			`assign wb_dat_o[23:16] = mem[adr+1];`
165			`assign wb_dat_o[31:24] = mem[adr+0];`
166
167			`//`
168			`// Writing to SRAM model`
169			`//`
170			`always @(posedge wb_rst_i or posedge wb_clk_i)`
171			`if (wb_cyc_i & wb_stb_i & wb_we_i) begin`
172			`if (wb_sel_i[0])`
173			`mem[adr+3] <= #1 wb_dat_i[7:0];`
174			`if (wb_sel_i[1])`
175			`mem[adr+2] <= #1 wb_dat_i[15:8];`
176			`if (wb_sel_i[2])`
177			`mem[adr+1] <= #1 wb_dat_i[23:16];`
178			`if (wb_sel_i[3])`
179			`mem[adr+0] <= #1 wb_dat_i[31:24];`
180			`end`
181
182			`ifdef SRAM_GENERIC_REGISTERED
183			`//`
184			`// WB Acknowledge`
185			`//`
186			`always @(posedge wb_clk_i or posedge wb_rst_i)`
187	978	lampret	`if (wb_rst_i) begin`
188			`delay <= #1 2'd3;`
189			`prev_adr <= #1 32'h0000_0000;`
190			`end`
191			`else if (delay && (wb_adr_i == prev_adr) && wb_cyc_i && wb_stb_i)`
192			`delay <= #1 delay - 2'd1;`
193			`else if (wb_ack_o \|\| (wb_adr_i != prev_adr) \|\| ~wb_stb_i) begin`
194			`delay <= #1 2'd3; // delay ... can range from 3 to 0`
195			`prev_adr <= #1 wb_adr_i;`
196			`end`
197	946	lampret	`else
198	978	lampret	`assign delay = 2'd0;`
199	946	lampret	`endif
200
201	978	lampret	`assign wb_ack_o = wb_cyc_i & wb_stb_i & (delay == 2'd0)`
202	946	lampret	`ifdef SRAM_GENERIC_REGISTERED
203	978	lampret	`& (wb_adr_i == prev_adr)`
204			`endif
205			`;`
206
207			`ifdef SRAM_GENERIC_REGISTERED
208	946	lampret	`//`
209			`// WB Error`
210			`//`
211			`always @(posedge wb_clk_i or posedge wb_rst_i)`
212			`if (wb_rst_i)`
213			`wb_err_o <= #1 1'b0;`
214			`else`
215			`wb_err_o <= #1 wb_err & !wb_err_o;`
216			`else
217			`assign wb_err_o = wb_err;`
218			`endif
219
220			`//`
221	978	lampret	`// SRAM i/f monitor`
222	946	lampret	`//`
223			`// synopsys translate_off`
224			`integer fsram;`
225			`initial fsram = $fopen("sram.log");`
226			`always @(posedge wb_clk_i)`
227			`if (wb_cyc_i)`
228			`if (wb_stb_i & wb_we_i) begin`
229			`if (wb_sel_i[3])`
230			`mem[{wb_adr_i[23:2], 2'b00}+0] = wb_dat_i[31:24];`
231			`if (wb_sel_i[2])`
232			`mem[{wb_adr_i[23:2], 2'b00}+1] = wb_dat_i[23:16];`
233			`if (wb_sel_i[1])`
234			`mem[{wb_adr_i[23:2], 2'b00}+2] = wb_dat_i[15:8];`
235			`if (wb_sel_i[0])`
236			`mem[{wb_adr_i[23:2], 2'b00}+3] = wb_dat_i[7:0];`
237			`$fdisplay(fsram, "%t [%h] <- write %h, byte sel %b", $time, wb_adr_i, wb_dat_i, wb_sel_i);`
238			`end else if (wb_ack_o)`
239			`$fdisplay(fsram, "%t [%h] -> read %h", $time, wb_adr_i, wb_dat_o);`
240			`// synopsys translate_on`
241
242			`endmodule`
243
244			`else
245
246			`module sram_top (`
247			`wb_clk_i, wb_rst_i,`
248
249			`wb_dat_i, wb_dat_o, wb_adr_i, wb_sel_i, wb_we_i, wb_cyc_i,`
250			`wb_stb_i, wb_ack_o, wb_err_o,`
251
252			`r_cen, r0_wen, r1_wen, r_oen, r_a, r_d_i, r_d_o, d_oe,`
253			`l_cen, l0_wen, l1_wen, l_oen, l_a, l_d_i, l_d_o`
254			`);`
255
256			`//`
257			`// Paraneters`
258			`//`
259			`parameter aw = 19;`
260
261			`//`
262			`// I/O Ports`
263			`//`
264			`input wb_clk_i;`
265			`input wb_rst_i;`
266
267			`//`
268			`// WB slave i/f`
269			`//`
270			`input [31:0] wb_dat_i;`
271			`output [31:0] wb_dat_o;`
272			`input [31:0] wb_adr_i;`
273			`input [3:0] wb_sel_i;`
274			`input wb_we_i;`
275			`input wb_cyc_i;`
276			`input wb_stb_i;`
277			`output wb_ack_o;`
278			`output wb_err_o;`
279
280			`//`
281			`// Right SRAM bank`
282			`//`
283			`output r_oen;`
284			`output r0_wen;`
285			`output r1_wen;`
286			`output r_cen;`
287			`input [15:0] r_d_i;`
288			`output [15:0] r_d_o;`
289			`output [aw-1:0] r_a;`
290
291			`//`
292			`// Left SRAM bank`
293			`//`
294			`output l_oen;`
295			`output l0_wen;`
296			`output l1_wen;`
297			`output l_cen;`
298			`input [15:0] l_d_i;`
299			`output [15:0] l_d_o;`
300			`output [aw-1:0] l_a;`
301
302			`//`
303			`// Common SRAM signals`
304			`//`
305			`output d_oe;`
306
307			`//`
308	746	lampret	`// Internal regs and wires`
309			`//`
310			`reg [15:0] r_data;`
311			`reg [15:0] l_data;`
312			`reg l0_wen;`
313			`wire l1_wen = l0_wen;`
314			`reg r0_wen;`
315			`wire r1_wen = r0_wen;`
316			`reg [31:0] latch_data;`
317			`reg ack_we;`
318			`wire l_oe;`
319			`wire r_oe;`
320			`wire r_ack;`
321			`reg Mux;`
322			`reg [aw-1:0] LatchedAddr;`
323			`reg [15:0] l_read;`
324			`reg [15:0] r_read;`
325			`reg d_oe;`
326			`reg [15:0] l_mux;`
327			`reg [15:0] r_mux;`
328
329			`//`
330			`// Aliases and simple assignments`
331			`//`
332			`assign wb_dat_o = {r_d_i, l_d_i};`
333			`assign l_oen = ~l_oe;`
334			`assign r_oen = ~r_oe;`
335			`assign l_a = Mux ? LatchedAddr : wb_adr_i[aw+1:2];`
336			`assign r_a = l_a;`
337			`assign l_d_o = l_mux;`
338			`assign r_d_o = r_mux;`
339			`assign l_oe = wb_cyc_i & wb_stb_i & l0_wen;`
340			`assign r_oe = wb_cyc_i & wb_stb_i & r0_wen;`
341			`assign l_cen = ~(wb_cyc_i & wb_stb_i);`
342			`assign r_cen = l_cen;`
343			`assign wb_ack_o = (wb_cyc_i & wb_stb_i & ~wb_we_i) \| ack_we;`
344			`assign wb_err_o = wb_cyc_i & wb_stb_i & (\|wb_adr_i[27:21]); // If Access to > 2MB (4-bit leading prefix ignored)`
345
346			`//`
347			`// RMW mux control`
348			`//`
349			`always @ (negedge wb_clk_i or posedge wb_rst_i)`
350			`begin`
351			`if (wb_rst_i)`
352			`Mux <= 1'b0;`
353			`else`
354			`if (ack_we)`
355			`Mux <= #1 1'b1;`
356			`else`
357			`Mux <= #1 1'b0;`
358			`end`
359
360			`//`
361			`// Latch address`
362			`//`
363			`always @ (negedge wb_clk_i or posedge wb_rst_i)`
364			`begin`
365			`if (wb_rst_i)`
366			`LatchedAddr <= 'h0;`
367			`else`
368			`if (wb_cyc_i & wb_stb_i)`
369			`LatchedAddr <= #1 wb_adr_i[aw+1:2];`
370			`end`
371
372			`//`
373			`// Latch data from RAM (read data)`
374			`//`
375			`always @ (posedge wb_clk_i or posedge wb_rst_i)`
376			`begin`
377			`if (wb_rst_i)`
378			`begin`
379			`l_read <= 16'h0;`
380			`r_read <= 16'h0;`
381			`end`
382			`else`
383			`if (wb_cyc_i & wb_stb_i)`
384			`begin`
385			`l_read <= #1 l_d_i[15:0];`
386			`r_read <= #1 r_d_i[15:0];`
387			`end`
388			`end`
389
390			`//`
391			`// Mux and latch data for writing left SRAM bank (bytes 0 and 1)`
392			`//`
393			`always @ (negedge wb_clk_i or posedge wb_rst_i)`
394			`begin`
395			`if (wb_rst_i)`
396			`l_mux <= 16'h0;`
397			`else`
398			`if (~l0_wen)`
399			`begin`
400			`if (wb_sel_i[0])`
401			`l_mux[7:0] <= #1 wb_dat_i[7:0];`
402			`else`
403			`l_mux[7:0] <= #1 l_read[7:0];`
404			`if (wb_sel_i[1])`
405			`l_mux[15:8] <= #1 wb_dat_i[15:8];`
406			`else`
407			`l_mux[15:8] <= #1 l_read[15:8];`
408			`end`
409			`else`
410			`l_mux[15:0] <= #1 16'hz;`
411			`end`
412
413			`//`
414			`// Mux and latch data for writing right SRAM bank (bytes 2 and 3)`
415			`//`
416			`always @ (negedge wb_clk_i or posedge wb_rst_i)`
417			`begin`
418			`if (wb_rst_i)`
419			`r_mux <= 16'h0;`
420			`else`
421			`if (~r0_wen)`
422			`begin`
423			`if (wb_sel_i[2])`
424			`r_mux[7:0] <= #1 wb_dat_i[23:16];`
425			`else`
426			`r_mux[7:0] <= #1 r_read[7:0];`
427			`if (wb_sel_i[3])`
428			`r_mux[15:8] <= #1 wb_dat_i[31:24];`
429			`else`
430			`r_mux[15:8] <= #1 r_read[15:8];`
431			`end`
432			`else`
433			`r_mux <= #1 16'hz;`
434			`end`
435
436			`//`
437			`// Left WE`
438			`//`
439			`always @ (posedge wb_clk_i or posedge wb_rst_i)`
440			`begin`
441			`if (wb_rst_i)`
442			`l0_wen <= 1'b1;`
443			`else`
444			`if (wb_cyc_i & wb_stb_i & wb_we_i & (\|wb_sel_i[1:0]) & ~wb_ack_o)`
445			`l0_wen <= #1 1'b0;`
446			`else`
447			`l0_wen <= #1 1'b1;`
448			`end`
449
450			`//`
451			`// Right WE`
452			`//`
453			`always @ (posedge wb_clk_i or posedge wb_rst_i)`
454			`begin`
455			`if (wb_rst_i)`
456			`r0_wen <= 1'b1;`
457			`else`
458			`if (wb_cyc_i & wb_stb_i & wb_we_i & (\|wb_sel_i[3:2]) & ~wb_ack_o)`
459			`r0_wen <= #1 1'b0;`
460			`else`
461			`r0_wen <= #1 1'b1;`
462			`end`
463
464			`//`
465			`// Write acknowledge`
466			`//`
467			`always @ (posedge wb_clk_i or posedge wb_rst_i)`
468			`begin`
469			`if (wb_rst_i)`
470			`ack_we <= 1'b0;`
471			`else`
472			`if (wb_cyc_i & wb_stb_i & wb_we_i & ~ack_we)`
473			`ack_we <= #1 1'b1;`
474			`else`
475			`ack_we <= #1 1'b0;`
476			`end`
477
478			`//`
479			`// Generate d_oe signal (tristate control)`
480			`//`
481			`always @ (negedge wb_clk_i or posedge wb_rst_i)`
482			`begin`
483			`if (wb_rst_i)`
484			`d_oe <= 1'b0;`
485			`else`
486			`if (~l0_wen \| ~r0_wen)`
487			`d_oe <= 1'b1;`
488			`else`
489			`d_oe <= 1'b0;`
490			`end`
491
492			`//`
493			`// SRAM i/f monitor`
494			`//`
495			`// synopsys translate_off`
496			`integer fsram;`
497			`initial fsram = $fopen("sram.log");`
498			`always @(posedge wb_clk_i)`
499			`begin`
500			`if (~l0_wen \| ~r0_wen)`

Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [orp/] [orp_soc/] [rtl/] [verilog/] [mem_if/] [sram_top.v] - Blame information for rev 978