URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [orpmon/] [services/] [net.c] - Blame information for rev 809

Go to most recent revision | Details | Compare with Previous | View Log


/*
 *      Copied from Linux Monitor (LiMon) - Networking.
 *
 *      Copyright 1994 - 2000 Neil Russell.
 *      (See License)
 *      Copyright 2000 Roland Borde
 *      Copyright 2000 Paolo Scaffardi
 *      Copyright 2000, 2001 Wolfgang Denk
 */
 
/*
 * General Desription:
 *
 * The user interface supports commands for BOOTP, RARP, and TFTP.
 * Also, we support ARP internally. Depending on available data,
 * these interact as follows:
 *
 * BOOTP:
 *
 *      Prerequisites:  - own ethernet address
 *      We want:        - own IP address
 *                      - TFTP server IP address
 *                      - name of bootfile
 *      Next step:      ARP
 *
 * RARP:
 *
 *      Prerequisites:  - own ethernet address
 *      We want:        - own IP address
 *                      - TFTP server IP address
 *      Next step:      ARP
 *
 * ARP:
 *
 *      Prerequisites:  - own ethernet address
 *                      - own IP address
 *                      - TFTP server IP address
 *      We want:        - TFTP server ethernet address
 *      Next step:      TFTP
 *
 * DHCP:
 *
 *     Prerequisites:   - own ethernet address
 *     We want:         - IP, Netmask, ServerIP, Gateway IP
 *                      - bootfilename, lease time
 *     Next step:       - TFTP
 *
 * TFTP:
 *
 *      Prerequisites:  - own ethernet address
 *                      - own IP address
 *                      - TFTP server IP address
 *                      - TFTP server ethernet address
 *                      - name of bootfile (if unknown, we use a default name
 *                        derived from our own IP address)
 *      We want:        - load the boot file
 *      Next step:      none
 */
 
 
#include "common.h"
#include "support.h"
#include "net.h"
#include "bootp.h"
#include "tftp.h"
#include "rarp.h"
#include "arp.h"
#include "eth.h"
 
#if 0
#define ET_DEBUG
#endif
 
/** BOOTP EXTENTIONS **/
 
IPaddr_t        NetOurSubnetMask=0;              /* Our subnet mask (0=unknown)  */
IPaddr_t        NetOurGatewayIP=0;               /* Our gateways IP address      */
IPaddr_t        NetOurDNSIP=0;                   /* Our DNS IP address           */
char            NetOurNISDomain[32]={0,};        /* Our NIS domain               */
char            NetOurHostName[32]={0,}; /* Our hostname                 */
char            NetOurRootPath[64]={0,}; /* Our bootpath                 */
unsigned short          NetBootFileSize=0;               /* Our bootfile size in blocks  */
 
/** END OF BOOTP EXTENTIONS **/
 
unsigned long           NetBootFileXferSize;    /* The actual transferred size of the bootfile (in bytes) */
unsigned char           NetOurEther[6];         /* Our ethernet address                 */
unsigned char           NetServerEther[6] =     /* Boot server enet address             */
                        { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
IPaddr_t        NetOurIP;               /* Our IP addr (0 = unknown)            */
IPaddr_t        NetServerIP;            /* Our IP addr (0 = unknown)            */
volatile unsigned char *NetRxPkt;               /* Current receive packet               */
int             NetRxPktLen;            /* Current rx packet length             */
unsigned        NetIPID;                /* IP packet ID                         */
unsigned char           NetBcastAddr[6] =       /* Ethernet bcast address               */
                        { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
int             NetState;               /* Network loop state                   */
 
char            BootFile[128];          /* Boot File name                       */
 
volatile unsigned char  PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN];
 
volatile unsigned char *NetRxPackets[PKTBUFSRX]; /* Receive packets                     */
 
static rxhand_f *packetHandler;         /* Current RX packet handler            */
static thand_f *timeHandler;            /* Current timeout handler              */
static unsigned long    timeValue;              /* Current timeout value                */
volatile unsigned char *NetTxPacket = 0; /* THE transmit packet                  */
 
static int net_check_prereq (proto_t protocol);
 
/**********************************************************************/
/*
 *      Main network processing loop.
 */
int
NetLoop(proto_t protocol)
{
#if 1
        if (!NetTxPacket) {
                int     i;
 
                /*
                 *      Setup packet buffers, aligned correctly.
                 */
                NetTxPacket = &PktBuf[0] + (PKTALIGN - 1);
                NetTxPacket -= (unsigned long)NetTxPacket % PKTALIGN;
                for (i = 0; i < PKTBUFSRX; i++) {
                        NetRxPackets[i] = NetTxPacket + (i+1)*PKTSIZE_ALIGN;
                }
        }
 
        eth_halt();
        eth_init(NetReceive);
 
restart:
        NetCopyEther(NetOurEther, global.eth_add);
 
        NetState = NETLOOP_CONTINUE;
 
        /*
         *      Start the ball rolling with the given start function.  From
         *      here on, this code is a state machine driven by received
         *      packets and timer events.
         */
 
        if (protocol == TFTP) {                 /* TFTP */
                NetOurIP        = global.ip;
                NetServerIP     = global.srv_ip;
                NetOurGatewayIP = global.gw_ip;
                NetOurSubnetMask= global.mask;
 
                if (net_check_prereq (protocol) != 0) {
                        return 0;
                }
 
                /* always use ARP to get server ethernet address */
                ArpTry = 0;
                ArpRequest ();
 
#if (CONFIG_COMMANDS & CFG_CMD_DHCP)
        } else if (protocol == DHCP) {
                if (net_check_prereq (protocol) != 0) {
                        return 0;
                }
 
                /* Start with a clean slate... */
                NetOurIP = 0;
                NetServerIP = 0;
                DhcpRequest();          /* Basically same as BOOTP */
 
#endif  /* CFG_CMD_DHCP */
 
        } else {                                /* BOOTP or RARP */
 
                /*
                 * initialize our IP addr to 0 in order to accept ANY
                 * IP addr assigned to us by the BOOTP / RARP server
                 */
                NetOurIP = 0;
                NetServerIP = 0;
 
                if (net_check_prereq (protocol) != 0) {
                        return 0;
                }
#ifdef BOOTP
                if (protocol == BOOTP) {
                        BootpTry = 0;
                        BootpRequest ();
                }
#endif
#ifdef RARP
    if {
                        RarpTry  = 0;
                        RarpRequest ();
                }
#endif
        }
 
        NetBootFileXferSize = 0;
 
        /*
         *      Main packet reception loop.  Loop receiving packets until
         *      someone sets `NetQuit'.
         */
        for (;;) {
//              WATCHDOG_RESET();
                /*
                 *      Check the ethernet for a new packet.  The ethernet
                 *      receive routine will process it.
                 */
                        eth_rx();
 
                /*
                 *      Abort if ctrl-c was pressed.
                 */
                if (ctrlc()) {
                    eth_halt();
                        printf("\nAbort\n");
                        return 0;
                }
 
 
                /*
                 *      Check for a timeout, and run the timeout handler
                 *      if we have one.
                 */
                if (timeHandler && (get_timer(0) > timeValue)) {
                        thand_f *x;
 
                        x = timeHandler;
                        timeHandler = (thand_f *)0;
                        (*x)();
                }
 
 
                switch (NetState) {
 
                case NETLOOP_RESTART:
                        goto restart;
 
                case NETLOOP_SUCCESS:
                        if (NetBootFileXferSize > 0) {
                                printf("Bytes transferred = %ld (%lx hex)\n",
                                        NetBootFileXferSize,
                                        NetBootFileXferSize);
                        }
                        eth_halt();
                        return NetBootFileXferSize;
 
                case NETLOOP_FAIL:
                        return 0;
                }
        }
#endif
}
 
/**********************************************************************/
 
 
#if 1
void
NetStartAgain(void)
{
        NetState = NETLOOP_RESTART;
}
 
/**********************************************************************/
/*
 *      Miscelaneous bits.
 */
 
void
NetSetHandler(rxhand_f * f)
{
        packetHandler = f;
}
 
 
void
NetSetTimeout(int iv, thand_f * f)
{
        if (iv == 0) {
                timeHandler = (thand_f *)0;
        } else {
                timeHandler = f;
                timeValue = get_timer(0) + iv;
        }
}
 
 
void
NetSendPacket(volatile unsigned char * pkt, int len)
{
  unsigned char *p;
 
  p = eth_get_tx_buf();
  memcpy(p, (void *)pkt, len);
  eth_send(p, len);
}
 
 
 
void
NetReceive(volatile unsigned char * pkt, int len)
{
        Ethernet_t *et;
        IP_t    *ip;
        ARP_t   *arp;
        int     x;
 
 
        NetRxPkt = pkt;
        NetRxPktLen = len;
        et = (Ethernet_t *)pkt;
 
        x = SWAP16(et->et_protlen);
 
        if (x < 1514) {
                /*
                 *      Got a 802 packet.  Check the other protocol field.
                 */
                x = SWAP16(et->et_prot);
                ip = (IP_t *)(pkt + E802_HDR_SIZE);
                len -= E802_HDR_SIZE;
        } else {
                ip = (IP_t *)(pkt + ETHER_HDR_SIZE);
                len -= ETHER_HDR_SIZE;
        }
 
#ifdef ET_DEBUG
        printf("Receive from protocol 0x%x\n", x);
#endif
 
        switch (x) {
 
        case PROT_ARP:
                /*
                 * We have to deal with two types of ARP packets:
                 * - REQUEST packets will be answered by sending  our
                 *   IP address - if we know it.
                 * - REPLY packates are expected only after we asked
                 *   for the TFTP server's or the gateway's ethernet
                 *   address; so if we receive such a packet, we set
                 *   the server ethernet address
                 */
#ifdef ET_DEBUG
                printf("Got ARP\n");
#endif
                arp = (ARP_t *)ip;
                if (len < ARP_HDR_SIZE) {
                        printf("bad length %d < %d\n", len, ARP_HDR_SIZE);
                        return;
                }
                if (SWAP16(arp->ar_hrd) != ARP_ETHER) {
                        return;
                }
                if (SWAP16(arp->ar_pro) != PROT_IP) {
                        return;
                }
                if (arp->ar_hln != 6) {
                        return;
                }
                if (arp->ar_pln != 4) {
                        return;
                }
 
                if (NetOurIP == 0 ||
                    *((IPaddr_t *)&arp->ar_data[16]) != NetOurIP) {
                        return;
                }
 
                switch (SWAP16(arp->ar_op)) {
                case ARPOP_REQUEST:             /* reply with our IP address    */
#ifdef ET_DEBUG
                        printf("Got ARP REQUEST, return our IP\n");
#endif
                        NetSetEther((unsigned char *)et, et->et_src, PROT_ARP);
                        arp->ar_op = SWAP16(ARPOP_REPLY);
                        NetCopyEther(&arp->ar_data[10], &arp->ar_data[0]);
                        NetCopyEther(&arp->ar_data[0], NetOurEther);
                        *(IPaddr_t *)(&arp->ar_data[16]) =
                                                *(IPaddr_t *)(&arp->ar_data[6]);
                        *(IPaddr_t *)(&arp->ar_data[6]) = NetOurIP;
                        NetSendPacket((unsigned char *)et,((unsigned char *)arp-pkt)+ARP_HDR_SIZE);
                        return;
                case ARPOP_REPLY:               /* set TFTP server eth addr     */
#ifdef ET_DEBUG
                        printf("Got ARP REPLY, set server/gtwy eth addr\n");
#endif
                        NetCopyEther(NetServerEther, &arp->ar_data[0]);
                        (*packetHandler)(0,0,0,0);  /* start TFTP */
                        return;
                default:
#ifdef ET_DEBUG
                        printf("Unexpected ARP opcode 0x%x\n", SWAP16(arp->ar_op));
#endif
                        return;
                }
 
        case PROT_RARP:
#ifdef ET_DEBUG
                printf("Got RARP\n");
#endif
                arp = (ARP_t *)ip;
                if (len < ARP_HDR_SIZE) {
                        printf("bad length %d < %d\n", len, ARP_HDR_SIZE);
                        return;
                }
 
                if ((SWAP16(arp->ar_op) != RARPOP_REPLY) ||
                        (SWAP16(arp->ar_hrd) != ARP_ETHER)   ||
                        (SWAP16(arp->ar_pro) != PROT_IP)     ||
                        (arp->ar_hln != 6) || (arp->ar_pln != 4)) {
 
                        printf("invalid RARP header\n");
                } else {
                        NetOurIP = *((IPaddr_t *)&arp->ar_data[16]);
                        NetServerIP = *((IPaddr_t *)&arp->ar_data[6]);
                        NetCopyEther(NetServerEther, &arp->ar_data[0]);
 
                        (*packetHandler)(0,0,0,0);
                }
                break;
 
        case PROT_IP:
#ifdef ET_DEBUG
                printf("Got IP\n");
#endif
                if (len < IP_HDR_SIZE) {
                        debug ("len bad %d < %d\n", len, IP_HDR_SIZE);
                        return;
                }
                if (len < SWAP16(ip->ip_len)) {
                        printf("len bad %d < %d\n", len, SWAP16(ip->ip_len));
                        return;
                }
                len = SWAP16(ip->ip_len);
#ifdef ET_DEBUG
                printf("len=%d, v=%02x\n", len, ip->ip_hl_v & 0xff);
#endif
                if ((ip->ip_hl_v & 0xf0) != 0x40) {
                        return;
                }
                if (ip->ip_off & SWAP16c(0x1fff)) { /* Can't deal w/ fragments */
                        return;
                }
                if (!NetCksumOk((unsigned char *)ip, IP_HDR_SIZE_NO_UDP / 2)) {
                        printf("checksum bad\n");
                        return;
                }
                if (NetOurIP &&
                    ip->ip_dst != NetOurIP &&
                    ip->ip_dst != 0xFFFFFFFF) {
                        return;
                }
                /*
                 * watch for ICMP host redirects
                 *
                 * There is no real handler code (yet). We just watch
                 * for ICMP host redirect messages. In case anybody
                 * sees these messages: please contact me
                 * (wd@denx.de), or - even better - send me the
                 * necessary fixes :-)
                 *
                 * Note: in all cases where I have seen this so far
                 * it was a problem with the router configuration,
                 * for instance when a router was configured in the
                 * BOOTP reply, but the TFTP server was on the same
                 * subnet. So this is probably a warning that your
                 * configuration might be wrong. But I'm not really
                 * sure if there aren't any other situations.
                 */
                if (ip->ip_p == IPPROTO_ICMP) {
                        ICMP_t *icmph = (ICMP_t *)&(ip->udp_src);
 
                        if (icmph->type != ICMP_REDIRECT)
                                return;
                        if (icmph->code != ICMP_REDIR_HOST)
                                return;
                        printf (" ICMP Host Redirect to ");
                        print_IPaddr(icmph->un.gateway);
                        putc(' ');
                } else if (ip->ip_p != IPPROTO_UDP) {   /* Only UDP packets */
                        return;
                }
 
                /*
                 *      IP header OK.  Pass the packet to the current handler.
                 */
                (*packetHandler)((unsigned char *)ip +IP_HDR_SIZE,
                                                SWAP16(ip->udp_dst),
                                                SWAP16(ip->udp_src),
                                                SWAP16(ip->udp_len) - 8);
 
                break;
        }
}
 
 
/**********************************************************************/
 
static int net_check_prereq (proto_t protocol)
{
        switch (protocol) {
        case ARP:       /* nothing to do */
                        break;
 
        case TFTP:
                        if (NetServerIP == 0) {
                          printf         ("*** ERROR: `serverip' not set\n");
                                return (1);
                        }
 
                        if (NetOurIP == 0) {
                                printf ("*** ERROR: `ipaddr' not set\n");
                                return (1);
                        }
                        /* Fall through */
 
        case DHCP:
        case RARP:
        case BOOTP:
                        if (memcmp(NetOurEther, "\0\0\0\0\0\0", 6) == 0) {
                                printf ("*** ERROR: `ethaddr' not set\n");
                                return (1);
                        }
                        /* Fall through */
        }
        return (0);      /* OK */
}
/**********************************************************************/
 
int
NetCksumOk(unsigned char * ptr, int len)
{
        return !((NetCksum(ptr, len) + 1) & 0xfffe);
}
 
 
unsigned
NetCksum(unsigned char * ptr, int len)
{
        unsigned long   xsum;
 
        xsum = 0;
        while (len-- > 0)
                xsum += *((unsigned short *)ptr)++;
        xsum = (xsum & 0xffff) + (xsum >> 16);
        xsum = (xsum & 0xffff) + (xsum >> 16);
        return (xsum & 0xffff);
}
 
 
void
NetCopyEther(volatile unsigned char * to, unsigned char * from)
{
        int     i;
 
        for (i = 0; i < 6; i++)
                *to++ = *from++;
}
 
 
void
NetSetEther(volatile unsigned char * xet, unsigned char * addr, unsigned long prot)
{
        volatile Ethernet_t *et = (Ethernet_t *)xet;
 
        NetCopyEther(et->et_dest, addr);
        NetCopyEther(et->et_src, NetOurEther);
        et->et_protlen = SWAP16(prot);
}
 
 
void
NetSetIP(volatile unsigned char * xip, IPaddr_t dest, int dport, int sport, int len)
{
        volatile IP_t *ip = (IP_t *)xip;
 
        /*
         *      If the data is an odd number of bytes, zero the
         *      byte after the last byte so that the checksum
         *      will work.
         */
        if (len & 1)
                xip[IP_HDR_SIZE + len] = 0;
 
        /*
         *      Construct an IP and UDP header.
                        (need to set no fragment bit - XXX)
         */
        ip->ip_hl_v  = 0x45;            /* IP_HDR_SIZE / 4 (not including UDP) */
        ip->ip_tos   = 0;
        ip->ip_len   = SWAP16(IP_HDR_SIZE + len);
        ip->ip_id    = SWAP16(NetIPID++);
        ip->ip_off   = SWAP16c(0x4000); /* No fragmentation */
        ip->ip_ttl   = 255;
        ip->ip_p     = 17;              /* UDP */
        ip->ip_sum   = 0;
        ip->ip_src   = NetOurIP;
        ip->ip_dst   = dest;
        ip->udp_src  = SWAP16(sport);
        ip->udp_dst  = SWAP16(dport);
        ip->udp_len  = SWAP16(8 + len);
        ip->udp_xsum = 0;
        ip->ip_sum   = ~NetCksum((unsigned char *)ip, IP_HDR_SIZE_NO_UDP / 2);
}
 
void copy_filename (unsigned char *dst, unsigned char *src, int size)
{
        if (*src && (*src == '"')) {
                ++src;
                --size;
        }
 
        while ((--size > 0) && *src && (*src != '"')) {
                *dst++ = *src++;
        }
        *dst = '\0';
}
 
void ip_to_string (IPaddr_t x, char *s)
{
    char num[] = "0123456789ABCDEF";
    int i;
 
    x = SWAP32(x);
 
    for(i = 28; i >= 0; i -= 4)
      *s++ = num[((x >> i) & 0x0f)];
    *s = 0;
}
 
void print_IPaddr (IPaddr_t x)
{
    char tmp[12];
 
    ip_to_string(x, tmp);
 
    printf(tmp);
}
 
#endif

Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [orpmon/] [services/] [net.c] - Blame information for rev 809

Line No.	Rev	Author	Line
1	809	simons	`/*`
2			`* Copied from Linux Monitor (LiMon) - Networking.`
3			`*`
4			`* Copyright 1994 - 2000 Neil Russell.`
5			`* (See License)`
6			`* Copyright 2000 Roland Borde`
7			`* Copyright 2000 Paolo Scaffardi`
8			`* Copyright 2000, 2001 Wolfgang Denk`
9			`*/`
10
11			`/*`
12			`* General Desription:`
13			`*`
14			`* The user interface supports commands for BOOTP, RARP, and TFTP.`
15			`* Also, we support ARP internally. Depending on available data,`
16			`* these interact as follows:`
17			`*`
18			`* BOOTP:`
19			`*`
20			`* Prerequisites: - own ethernet address`
21			`* We want: - own IP address`
22			`* - TFTP server IP address`
23			`* - name of bootfile`
24			`* Next step: ARP`
25			`*`
26			`* RARP:`
27			`*`
28			`* Prerequisites: - own ethernet address`
29			`* We want: - own IP address`
30			`* - TFTP server IP address`
31			`* Next step: ARP`
32			`*`
33			`* ARP:`
34			`*`
35			`* Prerequisites: - own ethernet address`
36			`* - own IP address`
37			`* - TFTP server IP address`
38			`* We want: - TFTP server ethernet address`
39			`* Next step: TFTP`
40			`*`
41			`* DHCP:`
42			`*`
43			`* Prerequisites: - own ethernet address`
44			`* We want: - IP, Netmask, ServerIP, Gateway IP`
45			`* - bootfilename, lease time`
46			`* Next step: - TFTP`
47			`*`
48			`* TFTP:`
49			`*`
50			`* Prerequisites: - own ethernet address`
51			`* - own IP address`
52			`* - TFTP server IP address`
53			`* - TFTP server ethernet address`
54			`* - name of bootfile (if unknown, we use a default name`
55			`* derived from our own IP address)`
56			`* We want: - load the boot file`
57			`* Next step: none`
58			`*/`
59
60
61			`#include "common.h"`
62			`#include "support.h"`
63			`#include "net.h"`
64			`#include "bootp.h"`
65			`#include "tftp.h"`
66			`#include "rarp.h"`
67			`#include "arp.h"`
68			`#include "eth.h"`
69
70			`#if 0`
71			`#define ET_DEBUG`
72			`#endif`
73
74			`/ BOOTP EXTENTIONS /`
75
76			`IPaddr_t NetOurSubnetMask=0; /* Our subnet mask (0=unknown) */`
77			`IPaddr_t NetOurGatewayIP=0; /* Our gateways IP address */`
78			`IPaddr_t NetOurDNSIP=0; /* Our DNS IP address */`
79			`char NetOurNISDomain[32]={0,}; /* Our NIS domain */`
80			`char NetOurHostName[32]={0,}; /* Our hostname */`
81			`char NetOurRootPath[64]={0,}; /* Our bootpath */`
82			`unsigned short NetBootFileSize=0; /* Our bootfile size in blocks */`
83
84			`/ END OF BOOTP EXTENTIONS /`
85
86			`unsigned long NetBootFileXferSize; /* The actual transferred size of the bootfile (in bytes) */`
87			`unsigned char NetOurEther[6]; /* Our ethernet address */`
88			`unsigned char NetServerEther[6] = /* Boot server enet address */`
89			`{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };`
90			`IPaddr_t NetOurIP; /* Our IP addr (0 = unknown) */`
91			`IPaddr_t NetServerIP; /* Our IP addr (0 = unknown) */`
92			`volatile unsigned char NetRxPkt; / Current receive packet */`
93			`int NetRxPktLen; /* Current rx packet length */`
94			`unsigned NetIPID; /* IP packet ID */`
95			`unsigned char NetBcastAddr[6] = /* Ethernet bcast address */`
96			`{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };`
97			`int NetState; /* Network loop state */`
98
99			`char BootFile[128]; /* Boot File name */`
100
101			`volatile unsigned char PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN];`
102
103			`volatile unsigned char NetRxPackets[PKTBUFSRX]; / Receive packets */`
104
105			`static rxhand_f packetHandler; / Current RX packet handler */`
106			`static thand_f timeHandler; / Current timeout handler */`
107			`static unsigned long timeValue; /* Current timeout value */`
108			`volatile unsigned char NetTxPacket = 0; / THE transmit packet */`
109
110			`static int net_check_prereq (proto_t protocol);`
111
112			`/**********************************************************************/`
113			`/*`
114			`* Main network processing loop.`
115			`*/`
116			`int`
117			`NetLoop(proto_t protocol)`
118			`{`
119			`#if 1`
120			`if (!NetTxPacket) {`
121			`int i;`
122
123			`/*`
124			`* Setup packet buffers, aligned correctly.`
125			`*/`
126			`NetTxPacket = &PktBuf[0] + (PKTALIGN - 1);`
127			`NetTxPacket -= (unsigned long)NetTxPacket % PKTALIGN;`
128			`for (i = 0; i < PKTBUFSRX; i++) {`
129			`NetRxPackets[i] = NetTxPacket + (i+1)*PKTSIZE_ALIGN;`
130			`}`
131			`}`
132
133			`eth_halt();`
134			`eth_init(NetReceive);`
135
136			`restart:`
137			`NetCopyEther(NetOurEther, global.eth_add);`
138
139			`NetState = NETLOOP_CONTINUE;`
140
141			`/*`
142			`* Start the ball rolling with the given start function. From`
143			`* here on, this code is a state machine driven by received`
144			`* packets and timer events.`
145			`*/`
146
147			`if (protocol == TFTP) { /* TFTP */`
148			`NetOurIP = global.ip;`
149			`NetServerIP = global.srv_ip;`
150			`NetOurGatewayIP = global.gw_ip;`
151			`NetOurSubnetMask= global.mask;`
152
153			`if (net_check_prereq (protocol) != 0) {`
154			`return 0;`
155			`}`
156
157			`/* always use ARP to get server ethernet address */`
158			`ArpTry = 0;`
159			`ArpRequest ();`
160
161			`#if (CONFIG_COMMANDS & CFG_CMD_DHCP)`
162			`} else if (protocol == DHCP) {`
163			`if (net_check_prereq (protocol) != 0) {`
164			`return 0;`
165			`}`
166
167			`/* Start with a clean slate... */`
168			`NetOurIP = 0;`
169			`NetServerIP = 0;`
170			`DhcpRequest(); /* Basically same as BOOTP */`
171
172			`#endif /* CFG_CMD_DHCP */`
173
174			`} else { /* BOOTP or RARP */`
175
176			`/*`
177			`* initialize our IP addr to 0 in order to accept ANY`
178			`* IP addr assigned to us by the BOOTP / RARP server`
179			`*/`
180			`NetOurIP = 0;`
181			`NetServerIP = 0;`
182
183			`if (net_check_prereq (protocol) != 0) {`
184			`return 0;`
185			`}`
186			`#ifdef BOOTP`
187			`if (protocol == BOOTP) {`
188			`BootpTry = 0;`
189			`BootpRequest ();`
190			`}`
191			`#endif`
192			`#ifdef RARP`
193			`if {`
194			`RarpTry = 0;`
195			`RarpRequest ();`
196			`}`
197			`#endif`
198			`}`
199
200			`NetBootFileXferSize = 0;`
201
202			`/*`
203			`* Main packet reception loop. Loop receiving packets until`
204			* someone sets `NetQuit'.
205			`*/`
206			`for (;;) {`
207			`// WATCHDOG_RESET();`
208			`/*`
209			`* Check the ethernet for a new packet. The ethernet`
210			`* receive routine will process it.`
211			`*/`
212			`eth_rx();`
213
214			`/*`
215			`* Abort if ctrl-c was pressed.`
216			`*/`
217			`if (ctrlc()) {`
218			`eth_halt();`
219			`printf("\nAbort\n");`
220			`return 0;`
221			`}`
222
223
224			`/*`
225			`* Check for a timeout, and run the timeout handler`
226			`* if we have one.`
227			`*/`
228			`if (timeHandler && (get_timer(0) > timeValue)) {`
229			`thand_f *x;`
230
231			`x = timeHandler;`
232			`timeHandler = (thand_f *)0;`
233			`(*x)();`
234			`}`
235
236
237			`switch (NetState) {`
238
239			`case NETLOOP_RESTART:`
240			`goto restart;`
241
242			`case NETLOOP_SUCCESS:`
243			`if (NetBootFileXferSize > 0) {`
244			`printf("Bytes transferred = %ld (%lx hex)\n",`
245			`NetBootFileXferSize,`
246			`NetBootFileXferSize);`
247			`}`
248			`eth_halt();`
249			`return NetBootFileXferSize;`
250
251			`case NETLOOP_FAIL:`
252			`return 0;`
253			`}`
254			`}`
255			`#endif`
256			`}`
257
258			`/**********************************************************************/`
259
260
261			`#if 1`
262			`void`
263			`NetStartAgain(void)`
264			`{`
265			`NetState = NETLOOP_RESTART;`
266			`}`
267
268			`/**********************************************************************/`
269			`/*`
270			`* Miscelaneous bits.`
271			`*/`
272
273			`void`
274			`NetSetHandler(rxhand_f * f)`
275			`{`
276			`packetHandler = f;`
277			`}`
278
279
280			`void`
281			`NetSetTimeout(int iv, thand_f * f)`
282			`{`
283			`if (iv == 0) {`
284			`timeHandler = (thand_f *)0;`
285			`} else {`
286			`timeHandler = f;`
287			`timeValue = get_timer(0) + iv;`
288			`}`
289			`}`
290
291
292			`void`
293			`NetSendPacket(volatile unsigned char * pkt, int len)`
294			`{`
295			`unsigned char *p;`
296
297			`p = eth_get_tx_buf();`
298			`memcpy(p, (void *)pkt, len);`
299			`eth_send(p, len);`
300			`}`
301
302
303
304			`void`
305			`NetReceive(volatile unsigned char * pkt, int len)`
306			`{`
307			`Ethernet_t *et;`
308			`IP_t *ip;`
309			`ARP_t *arp;`
310			`int x;`
311
312
313			`NetRxPkt = pkt;`
314			`NetRxPktLen = len;`
315			`et = (Ethernet_t *)pkt;`
316
317			`x = SWAP16(et->et_protlen);`
318
319			`if (x < 1514) {`
320			`/*`
321			`* Got a 802 packet. Check the other protocol field.`
322			`*/`
323			`x = SWAP16(et->et_prot);`
324			`ip = (IP_t *)(pkt + E802_HDR_SIZE);`
325			`len -= E802_HDR_SIZE;`
326			`} else {`
327			`ip = (IP_t *)(pkt + ETHER_HDR_SIZE);`
328			`len -= ETHER_HDR_SIZE;`
329			`}`
330
331			`#ifdef ET_DEBUG`
332			`printf("Receive from protocol 0x%x\n", x);`
333			`#endif`
334
335			`switch (x) {`
336
337			`case PROT_ARP:`
338			`/*`
339			`* We have to deal with two types of ARP packets:`
340			`* - REQUEST packets will be answered by sending our`
341			`* IP address - if we know it.`
342			`* - REPLY packates are expected only after we asked`
343			`* for the TFTP server's or the gateway's ethernet`
344			`* address; so if we receive such a packet, we set`
345			`* the server ethernet address`
346			`*/`
347			`#ifdef ET_DEBUG`
348			`printf("Got ARP\n");`
349			`#endif`
350			`arp = (ARP_t *)ip;`
351			`if (len < ARP_HDR_SIZE) {`
352			`printf("bad length %d < %d\n", len, ARP_HDR_SIZE);`
353			`return;`
354			`}`
355			`if (SWAP16(arp->ar_hrd) != ARP_ETHER) {`
356			`return;`
357			`}`
358			`if (SWAP16(arp->ar_pro) != PROT_IP) {`
359			`return;`
360			`}`
361			`if (arp->ar_hln != 6) {`
362			`return;`
363			`}`
364			`if (arp->ar_pln != 4) {`
365			`return;`
366			`}`
367
368			`if (NetOurIP == 0 \|\|`
369			`((IPaddr_t )&arp->ar_data[16]) != NetOurIP) {`
370			`return;`
371			`}`
372
373			`switch (SWAP16(arp->ar_op)) {`
374			`case ARPOP_REQUEST: /* reply with our IP address */`
375			`#ifdef ET_DEBUG`
376			`printf("Got ARP REQUEST, return our IP\n");`
377			`#endif`
378			`NetSetEther((unsigned char *)et, et->et_src, PROT_ARP);`
379			`arp->ar_op = SWAP16(ARPOP_REPLY);`
380			`NetCopyEther(&arp->ar_data[10], &arp->ar_data[0]);`
381			`NetCopyEther(&arp->ar_data[0], NetOurEther);`
382			`(IPaddr_t )(&arp->ar_data[16]) =`
383			`(IPaddr_t )(&arp->ar_data[6]);`
384			`(IPaddr_t )(&arp->ar_data[6]) = NetOurIP;`
385			`NetSendPacket((unsigned char )et,((unsigned char )arp-pkt)+ARP_HDR_SIZE);`
386			`return;`
387			`case ARPOP_REPLY: /* set TFTP server eth addr */`
388			`#ifdef ET_DEBUG`
389			`printf("Got ARP REPLY, set server/gtwy eth addr\n");`
390			`#endif`
391			`NetCopyEther(NetServerEther, &arp->ar_data[0]);`
392			`(packetHandler)(0,0,0,0); / start TFTP */`
393			`return;`
394			`default:`
395			`#ifdef ET_DEBUG`
396			`printf("Unexpected ARP opcode 0x%x\n", SWAP16(arp->ar_op));`
397			`#endif`
398			`return;`
399			`}`
400
401			`case PROT_RARP:`
402			`#ifdef ET_DEBUG`
403			`printf("Got RARP\n");`
404			`#endif`
405			`arp = (ARP_t *)ip;`
406			`if (len < ARP_HDR_SIZE) {`
407			`printf("bad length %d < %d\n", len, ARP_HDR_SIZE);`
408			`return;`
409			`}`
410
411			`if ((SWAP16(arp->ar_op) != RARPOP_REPLY) \|\|`
412			`(SWAP16(arp->ar_hrd) != ARP_ETHER) \|\|`
413			`(SWAP16(arp->ar_pro) != PROT_IP) \|\|`
414			`(arp->ar_hln != 6) \|\| (arp->ar_pln != 4)) {`
415
416			`printf("invalid RARP header\n");`
417			`} else {`
418			`NetOurIP = ((IPaddr_t )&arp->ar_data[16]);`
419			`NetServerIP = ((IPaddr_t )&arp->ar_data[6]);`
420			`NetCopyEther(NetServerEther, &arp->ar_data[0]);`
421
422			`(*packetHandler)(0,0,0,0);`
423			`}`
424			`break;`
425
426			`case PROT_IP:`
427			`#ifdef ET_DEBUG`
428			`printf("Got IP\n");`
429			`#endif`
430			`if (len < IP_HDR_SIZE) {`
431			`debug ("len bad %d < %d\n", len, IP_HDR_SIZE);`
432			`return;`
433			`}`
434			`if (len < SWAP16(ip->ip_len)) {`
435			`printf("len bad %d < %d\n", len, SWAP16(ip->ip_len));`
436			`return;`
437			`}`
438			`len = SWAP16(ip->ip_len);`
439			`#ifdef ET_DEBUG`
440			`printf("len=%d, v=%02x\n", len, ip->ip_hl_v & 0xff);`
441			`#endif`
442			`if ((ip->ip_hl_v & 0xf0) != 0x40) {`
443			`return;`
444			`}`
445			`if (ip->ip_off & SWAP16c(0x1fff)) { /* Can't deal w/ fragments */`
446			`return;`
447			`}`
448			`if (!NetCksumOk((unsigned char *)ip, IP_HDR_SIZE_NO_UDP / 2)) {`
449			`printf("checksum bad\n");`
450			`return;`
451			`}`
452			`if (NetOurIP &&`
453			`ip->ip_dst != NetOurIP &&`
454			`ip->ip_dst != 0xFFFFFFFF) {`
455			`return;`
456			`}`
457			`/*`
458			`* watch for ICMP host redirects`
459			`*`
460			`* There is no real handler code (yet). We just watch`
461			`* for ICMP host redirect messages. In case anybody`
462			`* sees these messages: please contact me`
463			`* (wd@denx.de), or - even better - send me the`
464			`* necessary fixes :-)`
465			`*`
466			`* Note: in all cases where I have seen this so far`
467			`* it was a problem with the router configuration,`
468			`* for instance when a router was configured in the`
469			`* BOOTP reply, but the TFTP server was on the same`
470			`* subnet. So this is probably a warning that your`
471			`* configuration might be wrong. But I'm not really`
472			`* sure if there aren't any other situations.`
473			`*/`
474			`if (ip->ip_p == IPPROTO_ICMP) {`
475			`ICMP_t icmph = (ICMP_t )&(ip->udp_src);`
476
477			`if (icmph->type != ICMP_REDIRECT)`
478			`return;`
479			`if (icmph->code != ICMP_REDIR_HOST)`
480			`return;`
481			`printf (" ICMP Host Redirect to ");`
482			`print_IPaddr(icmph->un.gateway);`
483			`putc(' ');`
484			`} else if (ip->ip_p != IPPROTO_UDP) { /* Only UDP packets */`
485			`return;`
486			`}`
487
488			`/*`
489			`* IP header OK. Pass the packet to the current handler.`
490			`*/`
491			`(packetHandler)((unsigned char )ip +IP_HDR_SIZE,`
492			`SWAP16(ip->udp_dst),`
493			`SWAP16(ip->udp_src),`
494			`SWAP16(ip->udp_len) - 8);`
495
496			`break;`
497			`}`
498			`}`
499
500
501			`/**********************************************************************/`
502
503			`static int net_check_prereq (proto_t protocol)`
504			`{`
505			`switch (protocol) {`
506			`case ARP: /* nothing to do */`
507			`break;`
508
509			`case TFTP:`
510			`if (NetServerIP == 0) {`
511			printf ("*** ERROR: `serverip' not set\n");
512			`return (1);`
513			`}`
514
515			`if (NetOurIP == 0) {`
516			printf ("*** ERROR: `ipaddr' not set\n");
517			`return (1);`
518			`}`
519			`/* Fall through */`
520
521			`case DHCP:`
522			`case RARP:`
523			`case BOOTP:`
524			`if (memcmp(NetOurEther, "\0\0\0\0\0\0", 6) == 0) {`
525			printf ("*** ERROR: `ethaddr' not set\n");
526			`return (1);`
527			`}`
528			`/* Fall through */`
529			`}`
530			`return (0); /* OK */`
531			`}`
532			`/**********************************************************************/`
533
534			`int`
535			`NetCksumOk(unsigned char * ptr, int len)`
536			`{`
537			`return !((NetCksum(ptr, len) + 1) & 0xfffe);`
538			`}`
539
540
541			`unsigned`
542			`NetCksum(unsigned char * ptr, int len)`
543			`{`
544			`unsigned long xsum;`
545
546			`xsum = 0;`
547			`while (len-- > 0)`
548			`xsum += ((unsigned short )ptr)++;`
549			`xsum = (xsum & 0xffff) + (xsum >> 16);`
550			`xsum = (xsum & 0xffff) + (xsum >> 16);`
551			`return (xsum & 0xffff);`
552			`}`
553
554
555			`void`
556			`NetCopyEther(volatile unsigned char * to, unsigned char * from)`
557			`{`
558			`int i;`
559
560			`for (i = 0; i < 6; i++)`
561			`to++ = from++;`
562			`}`
563
564
565			`void`
566			`NetSetEther(volatile unsigned char * xet, unsigned char * addr, unsigned long prot)`
567			`{`
568			`volatile Ethernet_t et = (Ethernet_t )xet;`
569
570			`NetCopyEther(et->et_dest, addr);`
571			`NetCopyEther(et->et_src, NetOurEther);`
572			`et->et_protlen = SWAP16(prot);`
573			`}`
574
575
576			`void`
577			`NetSetIP(volatile unsigned char * xip, IPaddr_t dest, int dport, int sport, int len)`
578			`{`
579			`volatile IP_t ip = (IP_t )xip;`
580
581			`/*`
582			`* If the data is an odd number of bytes, zero the`
583			`* byte after the last byte so that the checksum`
584			`* will work.`
585			`*/`
586			`if (len & 1)`
587			`xip[IP_HDR_SIZE + len] = 0;`
588
589			`/*`
590			`* Construct an IP and UDP header.`
591			`(need to set no fragment bit - XXX)`
592			`*/`
593			`ip->ip_hl_v = 0x45; /* IP_HDR_SIZE / 4 (not including UDP) */`
594			`ip->ip_tos = 0;`
595			`ip->ip_len = SWAP16(IP_HDR_SIZE + len);`
596			`ip->ip_id = SWAP16(NetIPID++);`
597			`ip->ip_off = SWAP16c(0x4000); /* No fragmentation */`
598			`ip->ip_ttl = 255;`
599			`ip->ip_p = 17; /* UDP */`
600			`ip->ip_sum = 0;`
601			`ip->ip_src = NetOurIP;`
602			`ip->ip_dst = dest;`
603			`ip->udp_src = SWAP16(sport);`
604			`ip->udp_dst = SWAP16(dport);`
605			`ip->udp_len = SWAP16(8 + len);`
606			`ip->udp_xsum = 0;`
607			`ip->ip_sum = ~NetCksum((unsigned char *)ip, IP_HDR_SIZE_NO_UDP / 2);`
608			`}`
609
610			`void copy_filename (unsigned char dst, unsigned char src, int size)`
611			`{`
612			`if (src && (src == '"')) {`
613			`++src;`
614			`--size;`
615			`}`
616
617			`while ((--size > 0) && src && (src != '"')) {`
618			`dst++ = src++;`
619			`}`
620			`*dst = '\0';`
621			`}`
622
623			`void ip_to_string (IPaddr_t x, char *s)`
624			`{`
625			`char num[] = "0123456789ABCDEF";`
626			`int i;`
627
628			`x = SWAP32(x);`
629
630			`for(i = 28; i >= 0; i -= 4)`
631			`*s++ = num[((x >> i) & 0x0f)];`
632			`*s = 0;`
633			`}`
634
635			`void print_IPaddr (IPaddr_t x)`
636			`{`
637			`char tmp[12];`
638
639			`ip_to_string(x, tmp);`
640
641			`printf(tmp);`
642			`}`
643
644			`#endif`