URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [m68k/] [ifpsp060/] [fskeleton.S] - Blame information for rev 1782

Details | Compare with Previous | View Log


|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
|M68000 Hi-Performance Microprocessor Division
|M68060 Software Package
|Production Release P1.00 -- October 10, 1994
|
|M68060 Software Package Copyright � 1993, 1994 Motorola Inc.  All rights reserved.
|
|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
|To the maximum extent permitted by applicable law,
|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
|and any warranty against infringement with regard to the SOFTWARE
|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
|
|To the maximum extent permitted by applicable law,
|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
|
|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
|so long as this entire notice is retained without alteration in any modified and/or
|redistributed versions, and that such modified versions are clearly identified as such.
|No licenses are granted by implication, estoppel or otherwise under any patents
|or trademarks of Motorola, Inc.
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| fskeleton.s
|
| This file contains:
|       (1) example "Call-out"s
|       (2) example package entry code
|       (3) example "Call-out" table
|
 
 
|################################
| (1) EXAMPLE CALL-OUTS         #
|                               #
| _060_fpsp_done()              #
| _060_real_ovfl()              #
| _060_real_unfl()              #
| _060_real_operr()             #
| _060_real_snan()              #
| _060_real_dz()                #
| _060_real_inex()              #
| _060_real_bsun()              #
| _060_real_fline()             #
| _060_real_fpu_disabled()      #
| _060_real_trap()              #
|################################
 
|
| _060_fpsp_done():
|
| This is the main exit point for the 68060 Floating-Point
| Software Package. For a normal exit, all 060FPSP routines call this
| routine. The operating system can do system dependent clean-up or
| simply execute an "rte" as with the sample code below.
|
        .global         _060_fpsp_done
_060_fpsp_done:
        rte
 
|
| _060_real_ovfl():
|
| This is the exit point for the 060FPSP when an enabled overflow exception
| is present. The routine below should point to the operating system handler
| for enabled overflow conditions. The exception stack frame is an overflow
| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.
|
| The sample routine below simply clears the exception status bit and
| does an "rte".
|
        .global         _060_real_ovfl
_060_real_ovfl:
        fsave           -(%sp)
        move.w          #0x6000,0x2(%sp)
        frestore        (%sp)+
        rte
 
|
| _060_real_unfl():
|
| This is the exit point for the 060FPSP when an enabled underflow exception
| is present. The routine below should point to the operating system handler
| for enabled underflow conditions. The exception stack frame is an underflow
| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.
|
| The sample routine below simply clears the exception status bit and
| does an "rte".
|
        .global         _060_real_unfl
_060_real_unfl:
        fsave           -(%sp)
        move.w          #0x6000,0x2(%sp)
        frestore        (%sp)+
        rte
 
|
| _060_real_operr():
|
| This is the exit point for the 060FPSP when an enabled operand error exception
| is present. The routine below should point to the operating system handler
| for enabled operand error exceptions. The exception stack frame is an operand error
| stack frame. The FP state frame holds the source operand of the faulting
| instruction.
|
| The sample routine below simply clears the exception status bit and
| does an "rte".
|
        .global         _060_real_operr
_060_real_operr:
        fsave           -(%sp)
        move.w          #0x6000,0x2(%sp)
        frestore        (%sp)+
        rte
 
|
| _060_real_snan():
|
| This is the exit point for the 060FPSP when an enabled signalling NaN exception
| is present. The routine below should point to the operating system handler
| for enabled signalling NaN exceptions. The exception stack frame is a signalling NaN
| stack frame. The FP state frame holds the source operand of the faulting
| instruction.
|
| The sample routine below simply clears the exception status bit and
| does an "rte".
|
        .global         _060_real_snan
_060_real_snan:
        fsave           -(%sp)
        move.w          #0x6000,0x2(%sp)
        frestore        (%sp)+
        rte
 
|
| _060_real_dz():
|
| This is the exit point for the 060FPSP when an enabled divide-by-zero exception
| is present. The routine below should point to the operating system handler
| for enabled divide-by-zero exceptions. The exception stack frame is a divide-by-zero
| stack frame. The FP state frame holds the source operand of the faulting
| instruction.
|
| The sample routine below simply clears the exception status bit and
| does an "rte".
|
        .global         _060_real_dz
_060_real_dz:
        fsave           -(%sp)
        move.w          #0x6000,0x2(%sp)
        frestore        (%sp)+
        rte
 
|
| _060_real_inex():
|
| This is the exit point for the 060FPSP when an enabled inexact exception
| is present. The routine below should point to the operating system handler
| for enabled inexact exceptions. The exception stack frame is an inexact
| stack frame. The FP state frame holds the source operand of the faulting
| instruction.
|
| The sample routine below simply clears the exception status bit and
| does an "rte".
|
        .global         _060_real_inex
_060_real_inex:
        fsave           -(%sp)
        move.w          #0x6000,0x2(%sp)
        frestore        (%sp)+
        rte
 
|
| _060_real_bsun():
|
| This is the exit point for the 060FPSP when an enabled bsun exception
| is present. The routine below should point to the operating system handler
| for enabled bsun exceptions. The exception stack frame is a bsun
| stack frame.
|
| The sample routine below clears the exception status bit, clears the NaN
| bit in the FPSR, and does an "rte". The instruction that caused the
| bsun will now be re-executed but with the NaN FPSR bit cleared.
|
        .global         _060_real_bsun
_060_real_bsun:
        fsave           -(%sp)
 
        fmove.l         %fpsr,-(%sp)
        andi.b          #0xfe,(%sp)
        fmove.l         (%sp)+,%fpsr
 
        add.l           #0xc,%sp
        rte
 
|
| _060_real_fline():
|
| This is the exit point for the 060FPSP when an F-Line Illegal exception is
| encountered. Three different types of exceptions can enter the F-Line exception
| vector number 11: FP Unimplemented Instructions, FP implemented instructions when
| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module
| _fpsp_fline() distinguishes between the three and acts appropriately. F-Line
| Illegals branch here.
|
        .global         _060_real_fline
_060_real_fline:
        bras            _060_real_fline
 
|
| _060_real_fpu_disabled():
|
| This is the exit point for the 060FPSP when an FPU disabled exception is
| encountered. Three different types of exceptions can enter the F-Line exception
| vector number 11: FP Unimplemented Instructions, FP implemented instructions when
| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module
| _fpsp_fline() distinguishes between the three and acts appropriately. FPU disabled
| exceptions branch here.
|
| The sample code below enables the FPU, sets the PC field in the exception stack
| frame to the PC of the instruction causing the exception, and does an "rte".
| The execution of the instruction then proceeds with an enabled floating-point
| unit.
|
        .global         _060_real_fpu_disabled
_060_real_fpu_disabled:
        move.l          %d0,-(%sp)              | enabled the fpu
        .long   0x4E7A0808
        |movec          pcr,d0
        bclr            #0x1,%d0
        .long   0x4E7B0808
        |movec          %d0,pcr
        move.l          (%sp)+,%d0
 
        move.l          0xc(%sp),0x2(%sp)       | set "Current PC"
        rte
 
|
| _060_real_trap():
|
| This is the exit point for the 060FPSP when an emulated "ftrapcc" instruction
| discovers that the trap condition is true and it should branch to the operating
| system handler for the trap exception vector number 7.
|
| The sample code below simply executes an "rte".
|
        .global         _060_real_trap
_060_real_trap:
        rte
 
|############################################################################
 
|#################################
| (2) EXAMPLE PACKAGE ENTRY CODE #
|#################################
 
        .global         _060_fpsp_snan
_060_fpsp_snan:
        bra.l           _FP_CALL_TOP+0x80+0x00
 
        .global         _060_fpsp_operr
_060_fpsp_operr:
        bra.l           _FP_CALL_TOP+0x80+0x08
 
        .global         _060_fpsp_ovfl
_060_fpsp_ovfl:
        bra.l           _FP_CALL_TOP+0x80+0x10
 
        .global         _060_fpsp_unfl
_060_fpsp_unfl:
        bra.l           _FP_CALL_TOP+0x80+0x18
 
        .global         _060_fpsp_dz
_060_fpsp_dz:
        bra.l           _FP_CALL_TOP+0x80+0x20
 
        .global         _060_fpsp_inex
_060_fpsp_inex:
        bra.l           _FP_CALL_TOP+0x80+0x28
 
        .global         _060_fpsp_fline
_060_fpsp_fline:
        bra.l           _FP_CALL_TOP+0x80+0x30
 
        .global         _060_fpsp_unsupp
_060_fpsp_unsupp:
        bra.l           _FP_CALL_TOP+0x80+0x38
 
        .global         _060_fpsp_effadd
_060_fpsp_effadd:
        bra.l           _FP_CALL_TOP+0x80+0x40
 
|############################################################################
 
|###############################
| (3) EXAMPLE CALL-OUT SECTION #
|###############################
 
| The size of this section MUST be 128 bytes!!!
 
        .global _FP_CALL_TOP
_FP_CALL_TOP:
        .long   _060_real_bsun          - _FP_CALL_TOP
        .long   _060_real_snan          - _FP_CALL_TOP
        .long   _060_real_operr         - _FP_CALL_TOP
        .long   _060_real_ovfl          - _FP_CALL_TOP
        .long   _060_real_unfl          - _FP_CALL_TOP
        .long   _060_real_dz            - _FP_CALL_TOP
        .long   _060_real_inex          - _FP_CALL_TOP
        .long   _060_real_fline         - _FP_CALL_TOP
        .long   _060_real_fpu_disabled  - _FP_CALL_TOP
        .long   _060_real_trap          - _FP_CALL_TOP
        .long   _060_real_trace         - _FP_CALL_TOP
        .long   _060_real_access        - _FP_CALL_TOP
        .long   _060_fpsp_done          - _FP_CALL_TOP
 
        .long   0x00000000, 0x00000000, 0x00000000
 
        .long   _060_imem_read          - _FP_CALL_TOP
        .long   _060_dmem_read          - _FP_CALL_TOP
        .long   _060_dmem_write         - _FP_CALL_TOP
        .long   _060_imem_read_word     - _FP_CALL_TOP
        .long   _060_imem_read_long     - _FP_CALL_TOP
        .long   _060_dmem_read_byte     - _FP_CALL_TOP
        .long   _060_dmem_read_word     - _FP_CALL_TOP
        .long   _060_dmem_read_long     - _FP_CALL_TOP
        .long   _060_dmem_write_byte    - _FP_CALL_TOP
        .long   _060_dmem_write_word    - _FP_CALL_TOP
        .long   _060_dmem_write_long    - _FP_CALL_TOP
 
        .long   0x00000000
 
        .long   0x00000000, 0x00000000, 0x00000000, 0x00000000
 
|############################################################################
 
| 060 FPSP KERNEL PACKAGE NEEDS TO GO HERE!!!
 
        .include "fpsp.sa"

Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [m68k/] [ifpsp060/] [fskeleton.S] - Blame information for rev 1782

Line No.	Rev	Author	Line
1	1623	jcastillo	`\|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
2			`\|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP`
3			`\|M68000 Hi-Performance Microprocessor Division`
4			`\|M68060 Software Package`
5			`\|Production Release P1.00 -- October 10, 1994`
6			`\|`
7			`\|M68060 Software Package Copyright � 1993, 1994 Motorola Inc. All rights reserved.`
8			`\|`
9			`\|THE SOFTWARE is provided on an "AS IS" basis and without warranty.`
10			`\|To the maximum extent permitted by applicable law,`
11			`\|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,`
12			`\|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE`
13			`\|and any warranty against infringement with regard to the SOFTWARE`
14			`\|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.`
15			`\|`
16			`\|To the maximum extent permitted by applicable law,`
17			`\|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER`
18			`\|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,`
19			`\|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)`
20			`\|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.`
21			`\|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.`
22			`\|`
23			`\|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE`
24			`\|so long as this entire notice is retained without alteration in any modified and/or`
25			`\|redistributed versions, and that such modified versions are clearly identified as such.`
26			`\|No licenses are granted by implication, estoppel or otherwise under any patents`
27			`\|or trademarks of Motorola, Inc.`
28			`\|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
29			`\| fskeleton.s`
30			`\|`
31			`\| This file contains:`
32			`\| (1) example "Call-out"s`
33			`\| (2) example package entry code`
34			`\| (3) example "Call-out" table`
35			`\|`
36
37
38			`\|################################`
39			`\| (1) EXAMPLE CALL-OUTS #`
40			`\| #`
41			`\| _060_fpsp_done() #`
42			`\| _060_real_ovfl() #`
43			`\| _060_real_unfl() #`
44			`\| _060_real_operr() #`
45			`\| _060_real_snan() #`
46			`\| _060_real_dz() #`
47			`\| _060_real_inex() #`
48			`\| _060_real_bsun() #`
49			`\| _060_real_fline() #`
50			`\| _060_real_fpu_disabled() #`
51			`\| _060_real_trap() #`
52			`\|################################`
53
54			`\|`
55			`\| _060_fpsp_done():`
56			`\|`
57			`\| This is the main exit point for the 68060 Floating-Point`
58			`\| Software Package. For a normal exit, all 060FPSP routines call this`
59			`\| routine. The operating system can do system dependent clean-up or`
60			`\| simply execute an "rte" as with the sample code below.`
61			`\|`
62			`.global _060_fpsp_done`
63			`_060_fpsp_done:`
64			`rte`
65
66			`\|`
67			`\| _060_real_ovfl():`
68			`\|`
69			`\| This is the exit point for the 060FPSP when an enabled overflow exception`
70			`\| is present. The routine below should point to the operating system handler`
71			`\| for enabled overflow conditions. The exception stack frame is an overflow`
72			`\| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.`
73			`\|`
74			`\| The sample routine below simply clears the exception status bit and`
75			`\| does an "rte".`
76			`\|`
77			`.global _060_real_ovfl`
78			`_060_real_ovfl:`
79			`fsave -(%sp)`
80			`move.w #0x6000,0x2(%sp)`
81			`frestore (%sp)+`
82			`rte`
83
84			`\|`
85			`\| _060_real_unfl():`
86			`\|`
87			`\| This is the exit point for the 060FPSP when an enabled underflow exception`
88			`\| is present. The routine below should point to the operating system handler`
89			`\| for enabled underflow conditions. The exception stack frame is an underflow`
90			`\| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND.`
91			`\|`
92			`\| The sample routine below simply clears the exception status bit and`
93			`\| does an "rte".`
94			`\|`
95			`.global _060_real_unfl`
96			`_060_real_unfl:`
97			`fsave -(%sp)`
98			`move.w #0x6000,0x2(%sp)`
99			`frestore (%sp)+`
100			`rte`
101
102			`\|`
103			`\| _060_real_operr():`
104			`\|`
105			`\| This is the exit point for the 060FPSP when an enabled operand error exception`
106			`\| is present. The routine below should point to the operating system handler`
107			`\| for enabled operand error exceptions. The exception stack frame is an operand error`
108			`\| stack frame. The FP state frame holds the source operand of the faulting`
109			`\| instruction.`
110			`\|`
111			`\| The sample routine below simply clears the exception status bit and`
112			`\| does an "rte".`
113			`\|`
114			`.global _060_real_operr`
115			`_060_real_operr:`
116			`fsave -(%sp)`
117			`move.w #0x6000,0x2(%sp)`
118			`frestore (%sp)+`
119			`rte`
120
121			`\|`
122			`\| _060_real_snan():`
123			`\|`
124			`\| This is the exit point for the 060FPSP when an enabled signalling NaN exception`
125			`\| is present. The routine below should point to the operating system handler`
126			`\| for enabled signalling NaN exceptions. The exception stack frame is a signalling NaN`
127			`\| stack frame. The FP state frame holds the source operand of the faulting`
128			`\| instruction.`
129			`\|`
130			`\| The sample routine below simply clears the exception status bit and`
131			`\| does an "rte".`
132			`\|`
133			`.global _060_real_snan`
134			`_060_real_snan:`
135			`fsave -(%sp)`
136			`move.w #0x6000,0x2(%sp)`
137			`frestore (%sp)+`
138			`rte`
139
140			`\|`
141			`\| _060_real_dz():`
142			`\|`
143			`\| This is the exit point for the 060FPSP when an enabled divide-by-zero exception`
144			`\| is present. The routine below should point to the operating system handler`
145			`\| for enabled divide-by-zero exceptions. The exception stack frame is a divide-by-zero`
146			`\| stack frame. The FP state frame holds the source operand of the faulting`
147			`\| instruction.`
148			`\|`
149			`\| The sample routine below simply clears the exception status bit and`
150			`\| does an "rte".`
151			`\|`
152			`.global _060_real_dz`
153			`_060_real_dz:`
154			`fsave -(%sp)`
155			`move.w #0x6000,0x2(%sp)`
156			`frestore (%sp)+`
157			`rte`
158
159			`\|`
160			`\| _060_real_inex():`
161			`\|`
162			`\| This is the exit point for the 060FPSP when an enabled inexact exception`
163			`\| is present. The routine below should point to the operating system handler`
164			`\| for enabled inexact exceptions. The exception stack frame is an inexact`
165			`\| stack frame. The FP state frame holds the source operand of the faulting`
166			`\| instruction.`
167			`\|`
168			`\| The sample routine below simply clears the exception status bit and`
169			`\| does an "rte".`
170			`\|`
171			`.global _060_real_inex`
172			`_060_real_inex:`
173			`fsave -(%sp)`
174			`move.w #0x6000,0x2(%sp)`
175			`frestore (%sp)+`
176			`rte`
177
178			`\|`
179			`\| _060_real_bsun():`
180			`\|`
181			`\| This is the exit point for the 060FPSP when an enabled bsun exception`
182			`\| is present. The routine below should point to the operating system handler`
183			`\| for enabled bsun exceptions. The exception stack frame is a bsun`
184			`\| stack frame.`
185			`\|`
186			`\| The sample routine below clears the exception status bit, clears the NaN`
187			`\| bit in the FPSR, and does an "rte". The instruction that caused the`
188			`\| bsun will now be re-executed but with the NaN FPSR bit cleared.`
189			`\|`
190			`.global _060_real_bsun`
191			`_060_real_bsun:`
192			`fsave -(%sp)`
193
194			`fmove.l %fpsr,-(%sp)`
195			`andi.b #0xfe,(%sp)`
196			`fmove.l (%sp)+,%fpsr`
197
198			`add.l #0xc,%sp`
199			`rte`
200
201			`\|`
202			`\| _060_real_fline():`
203			`\|`
204			`\| This is the exit point for the 060FPSP when an F-Line Illegal exception is`
205			`\| encountered. Three different types of exceptions can enter the F-Line exception`
206			`\| vector number 11: FP Unimplemented Instructions, FP implemented instructions when`
207			`\| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module`
208			`\| _fpsp_fline() distinguishes between the three and acts appropriately. F-Line`
209			`\| Illegals branch here.`
210			`\|`
211			`.global _060_real_fline`
212			`_060_real_fline:`
213			`bras _060_real_fline`
214
215			`\|`
216			`\| _060_real_fpu_disabled():`
217			`\|`
218			`\| This is the exit point for the 060FPSP when an FPU disabled exception is`
219			`\| encountered. Three different types of exceptions can enter the F-Line exception`
220			`\| vector number 11: FP Unimplemented Instructions, FP implemented instructions when`
221			`\| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module`
222			`\| _fpsp_fline() distinguishes between the three and acts appropriately. FPU disabled`
223			`\| exceptions branch here.`
224			`\|`
225			`\| The sample code below enables the FPU, sets the PC field in the exception stack`
226			`\| frame to the PC of the instruction causing the exception, and does an "rte".`
227			`\| The execution of the instruction then proceeds with an enabled floating-point`
228			`\| unit.`
229			`\|`
230			`.global _060_real_fpu_disabled`
231			`_060_real_fpu_disabled:`
232			`move.l %d0,-(%sp) \| enabled the fpu`
233			`.long 0x4E7A0808`
234			`\|movec pcr,d0`
235			`bclr #0x1,%d0`
236			`.long 0x4E7B0808`
237			`\|movec %d0,pcr`
238			`move.l (%sp)+,%d0`
239
240			`move.l 0xc(%sp),0x2(%sp) \| set "Current PC"`
241			`rte`
242
243			`\|`
244			`\| _060_real_trap():`
245			`\|`
246			`\| This is the exit point for the 060FPSP when an emulated "ftrapcc" instruction`
247			`\| discovers that the trap condition is true and it should branch to the operating`
248			`\| system handler for the trap exception vector number 7.`
249			`\|`
250			`\| The sample code below simply executes an "rte".`
251			`\|`
252			`.global _060_real_trap`
253			`_060_real_trap:`
254			`rte`
255
256			`\|############################################################################`
257
258			`\|#################################`
259			`\| (2) EXAMPLE PACKAGE ENTRY CODE #`
260			`\|#################################`
261
262			`.global _060_fpsp_snan`
263			`_060_fpsp_snan:`
264			`bra.l _FP_CALL_TOP+0x80+0x00`
265
266			`.global _060_fpsp_operr`
267			`_060_fpsp_operr:`
268			`bra.l _FP_CALL_TOP+0x80+0x08`
269
270			`.global _060_fpsp_ovfl`
271			`_060_fpsp_ovfl:`
272			`bra.l _FP_CALL_TOP+0x80+0x10`
273
274			`.global _060_fpsp_unfl`
275			`_060_fpsp_unfl:`
276			`bra.l _FP_CALL_TOP+0x80+0x18`
277
278			`.global _060_fpsp_dz`
279			`_060_fpsp_dz:`
280			`bra.l _FP_CALL_TOP+0x80+0x20`
281
282			`.global _060_fpsp_inex`
283			`_060_fpsp_inex:`
284			`bra.l _FP_CALL_TOP+0x80+0x28`
285
286			`.global _060_fpsp_fline`
287			`_060_fpsp_fline:`
288			`bra.l _FP_CALL_TOP+0x80+0x30`
289
290			`.global _060_fpsp_unsupp`
291			`_060_fpsp_unsupp:`
292			`bra.l _FP_CALL_TOP+0x80+0x38`
293
294			`.global _060_fpsp_effadd`
295			`_060_fpsp_effadd:`
296			`bra.l _FP_CALL_TOP+0x80+0x40`
297
298			`\|############################################################################`
299
300			`\|###############################`
301			`\| (3) EXAMPLE CALL-OUT SECTION #`
302			`\|###############################`
303
304			`\| The size of this section MUST be 128 bytes!!!`
305
306			`.global _FP_CALL_TOP`
307			`_FP_CALL_TOP:`
308			`.long _060_real_bsun - _FP_CALL_TOP`
309			`.long _060_real_snan - _FP_CALL_TOP`
310			`.long _060_real_operr - _FP_CALL_TOP`
311			`.long _060_real_ovfl - _FP_CALL_TOP`
312			`.long _060_real_unfl - _FP_CALL_TOP`
313			`.long _060_real_dz - _FP_CALL_TOP`
314			`.long _060_real_inex - _FP_CALL_TOP`
315			`.long _060_real_fline - _FP_CALL_TOP`
316			`.long _060_real_fpu_disabled - _FP_CALL_TOP`
317			`.long _060_real_trap - _FP_CALL_TOP`
318			`.long _060_real_trace - _FP_CALL_TOP`
319			`.long _060_real_access - _FP_CALL_TOP`
320			`.long _060_fpsp_done - _FP_CALL_TOP`
321
322			`.long 0x00000000, 0x00000000, 0x00000000`
323
324			`.long _060_imem_read - _FP_CALL_TOP`
325			`.long _060_dmem_read - _FP_CALL_TOP`
326			`.long _060_dmem_write - _FP_CALL_TOP`
327			`.long _060_imem_read_word - _FP_CALL_TOP`
328			`.long _060_imem_read_long - _FP_CALL_TOP`
329			`.long _060_dmem_read_byte - _FP_CALL_TOP`
330			`.long _060_dmem_read_word - _FP_CALL_TOP`
331			`.long _060_dmem_read_long - _FP_CALL_TOP`
332			`.long _060_dmem_write_byte - _FP_CALL_TOP`
333			`.long _060_dmem_write_word - _FP_CALL_TOP`
334			`.long _060_dmem_write_long - _FP_CALL_TOP`
335
336			`.long 0x00000000`
337
338			`.long 0x00000000, 0x00000000, 0x00000000, 0x00000000`
339
340			`\|############################################################################`
341
342			`\| 060 FPSP KERNEL PACKAGE NEEDS TO GO HERE!!!`
343
344			`.include "fpsp.sa"`