Subversion Repositories or1k_old

/* $Id: irq.h,v 1.1 2005-12-20 11:32:11 jcastillo Exp $

 * irq.h: IRQ registers on the Sparc.

 *

 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)

 */

#ifndef _SPARC_IRQ_H

#define _SPARC_IRQ_H

#include <linux/linkage.h>

#include <asm/system.h>     /* For NCPUS */

#define NR_IRQS    15

/* Dave Redman (djhr@tadpole.co.uk)

 * changed these to function pointers.. it saves cycles and will allow

 * the irq dependencies to be split into different files at a later date

 * sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size.

 */

extern void (*disable_irq)(unsigned int);

extern void (*enable_irq)(unsigned int);

extern void (*clear_clock_irq)( void );

extern void (*clear_profile_irq)( void );

extern void (*load_profile_irq)( unsigned int timeout );

extern void (*init_timers)(void (*lvl10_irq)(int, void *, struct pt_regs *));

extern void claim_ticker14(void (*irq_handler)(int, void *, struct pt_regs *),

                           int irq,

                           unsigned int timeout);

#ifdef __SMP__

extern void (*set_cpu_int)(int, int);

extern void (*clear_cpu_int)(int, int);

extern void (*set_irq_udt)(int);

#endif

extern int request_fast_irq(unsigned int irq, void (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname);

/* On the sun4m, just like the timers, we have both per-cpu and master

 * interrupt registers.

 */

/* These registers are used for sending/receiving irqs from/to

 * different cpu's.

 */

struct sun4m_intreg_percpu {

        unsigned int tbt;        /* Interrupts still pending for this cpu. */

        /* These next two registers are WRITE-ONLY and are only

         * "on bit" sensitive, "off bits" written have NO affect.

         */

        unsigned int clear;  /* Clear this cpus irqs here. */

        unsigned int set;    /* Set this cpus irqs here. */

        unsigned char space[PAGE_SIZE - 12];

};

/*

 * djhr

 * Actually the clear and set fields in this struct are misleading..

 * according to the SLAVIO manual (and the same applies for the SEC)

 * the clear field clears bits in the mask which will ENABLE that IRQ

 * the set field sets bits in the mask to DISABLE the IRQ.

 *

 * Also the undirected_xx address in the SLAVIO is defined as

 * RESERVED and write only..

 *

 * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor

 *             sun4m machines, for MP the layout makes more sense.

 */

struct sun4m_intregs {

        struct sun4m_intreg_percpu cpu_intregs[NCPUS];

        unsigned int tbt;                /* IRQ's that are still pending. */

        unsigned int irqs;               /* Master IRQ bits. */

        /* Again, like the above, two these registers are WRITE-ONLY. */

        unsigned int clear;              /* Clear master IRQ's by setting bits here. */

        unsigned int set;                /* Set master IRQ's by setting bits here. */

        /* This register is both READ and WRITE. */

        unsigned int undirected_target;  /* Which cpu gets undirected irqs. */

};

extern struct sun4m_intregs *sun4m_interrupts;

/*

 * Bit field defines for the interrupt registers on various

 * Sparc machines.

 */

/* The sun4c interrupt register. */

#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */

#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */

#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */

#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */

#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */

#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */

#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */

/* Dave Redman (djhr@tadpole.co.uk)

 * The sun4m interrupt registers.

 */

#define SUN4M_INT_ENABLE        0x80000000

#define SUN4M_INT_E14           0x00000080

#define SUN4M_INT_E10           0x00080000

#define SUN4M_HARD_INT(x)       (0x000000001 << (x))

#define SUN4M_SOFT_INT(x)       (0x000010000 << (x))

#define SUN4M_INT_MASKALL       0x80000000        /* mask all interrupts */

#define SUN4M_INT_MODULE_ERR    0x40000000        /* module error */

#define SUN4M_INT_M2S_WRITE     0x20000000        /* write buffer error */

#define SUN4M_INT_ECC           0x10000000        /* ecc memory error */

#define SUN4M_INT_FLOPPY        0x00400000        /* floppy disk */

#define SUN4M_INT_MODULE        0x00200000        /* module interrupt */

#define SUN4M_INT_VIDEO         0x00100000        /* onboard video */

#define SUN4M_INT_REALTIME      0x00080000        /* system timer */

#define SUN4M_INT_SCSI          0x00040000        /* onboard scsi */

#define SUN4M_INT_AUDIO         0x00020000        /* audio/isdn */

#define SUN4M_INT_ETHERNET      0x00010000        /* onboard ethernet */

#define SUN4M_INT_SERIAL        0x00008000        /* serial ports */

#define SUN4M_INT_KBDMS         0x00004000        /* keyboard/mouse */

#define SUN4M_INT_SBUSBITS      0x00003F80        /* sbus int bits */

#define SUN4M_INT_SBUS(x)       (1 << (x+7))

#endif