Subversion Repositories or1k_old

/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM

 * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993

 * derived from Data Sheet, Copyright Motorola 1984 (!).

 * It was written to be part of the Linux operating system.

 */

/* permission is hereby granted to copy, modify and redistribute this code

 * in terms of the GNU Library General Public License, Version 2 or later,

 * at your option.

 */

#ifndef _MC146818RTC_H

#define _MC146818RTC_H

#include <asm/io.h>

#ifndef RTC_PORT

#define RTC_PORT(x)     (0x70 + (x))

#define RTC_ALWAYS_BCD  1

#endif

#define CMOS_READ(addr) ({ \

outb_p((addr),RTC_PORT(0)); \

inb_p(RTC_PORT(1)); \

})

#define CMOS_WRITE(val, addr) ({ \

outb_p((addr),RTC_PORT(0)); \

outb_p((val),RTC_PORT(1)); \

})

/**********************************************************************

 * register summary

 **********************************************************************/

#define RTC_SECONDS             0

#define RTC_SECONDS_ALARM       1

#define RTC_MINUTES             2

#define RTC_MINUTES_ALARM       3

#define RTC_HOURS               4

#define RTC_HOURS_ALARM         5

/* RTC_*_alarm is always true if 2 MSBs are set */

# define RTC_ALARM_DONT_CARE    0xC0

#define RTC_DAY_OF_WEEK         6

#define RTC_DAY_OF_MONTH        7

#define RTC_MONTH               8

#define RTC_YEAR                9

/* control registers - Moto names

 */

#define RTC_REG_A               10

#define RTC_REG_B               11

#define RTC_REG_C               12

#define RTC_REG_D               13

/**********************************************************************

 * register details

 **********************************************************************/

#define RTC_FREQ_SELECT RTC_REG_A

/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,

 * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,

 * totalling to a max high interval of 2.228 ms.

 */

# define RTC_UIP                0x80

# define RTC_DIV_CTL            0x70

   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */

#  define RTC_REF_CLCK_4MHZ     0x00

#  define RTC_REF_CLCK_1MHZ     0x10

#  define RTC_REF_CLCK_32KHZ    0x20

   /* 2 values for divider stage reset, others for "testing purposes only" */

#  define RTC_DIV_RESET1        0x60

#  define RTC_DIV_RESET2        0x70

  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */

# define RTC_RATE_SELECT        0x0F

/**********************************************************************/

#define RTC_CONTROL     RTC_REG_B

# define RTC_SET 0x80           /* disable updates for clock setting */

# define RTC_PIE 0x40           /* periodic interrupt enable */

# define RTC_AIE 0x20           /* alarm interrupt enable */

# define RTC_UIE 0x10           /* update-finished interrupt enable */

# define RTC_SQWE 0x08          /* enable square-wave output */

# define RTC_DM_BINARY 0x04     /* all time/date values are BCD if clear */

# define RTC_24H 0x02           /* 24 hour mode - else hours bit 7 means pm */

# define RTC_DST_EN 0x01        /* auto switch DST - works f. USA only */

/**********************************************************************/

#define RTC_INTR_FLAGS  RTC_REG_C

/* caution - cleared by read */

# define RTC_IRQF 0x80          /* any of the following 3 is active */

# define RTC_PF 0x40

# define RTC_AF 0x20

# define RTC_UF 0x10

/**********************************************************************/

#define RTC_VALID       RTC_REG_D

# define RTC_VRT 0x80           /* valid RAM and time */

/**********************************************************************/

/* example: !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)

 * determines if the following two #defines are needed

 */

#ifndef BCD_TO_BIN

#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)

#endif

#ifndef BIN_TO_BCD

#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)

#endif

/*

 * The struct used to pass data via the following ioctl. Similar to the

 * struct tm in <time.h>, but it needs to be here so that the kernel

 * source is self contained, allowing cross-compiles, etc. etc.

 */

struct rtc_time {

        int tm_sec;

        int tm_min;

        int tm_hour;

        int tm_mday;

        int tm_mon;

        int tm_year;

        int tm_wday;

        int tm_yday;

        int tm_isdst;

};

/*

 * ioctl calls that are permitted to the /dev/rtc interface, if

 * CONFIG_RTC was enabled.

 */

#define RTC_AIE_ON      _IO('p', 0x01)  /* Alarm int. enable on         */

#define RTC_AIE_OFF     _IO('p', 0x02)  /* ... off                      */

#define RTC_UIE_ON      _IO('p', 0x03)  /* Update int. enable on        */

#define RTC_UIE_OFF     _IO('p', 0x04)  /* ... off                      */

#define RTC_PIE_ON      _IO('p', 0x05)  /* Periodic int. enable on      */

#define RTC_PIE_OFF     _IO('p', 0x06)  /* ... off                      */

#define RTC_ALM_SET     _IOW('p', 0x07, struct rtc_time) /* Set alarm time  */

#define RTC_ALM_READ    _IOR('p', 0x08, struct rtc_time) /* Read alarm time */

#define RTC_RD_TIME     _IOR('p', 0x09, struct rtc_time) /* Read RTC time   */

#define RTC_SET_TIME    _IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */

#define RTC_IRQP_READ   _IOR('p', 0x0b, unsigned long)   /* Read IRQ rate   */

#define RTC_IRQP_SET    _IOW('p', 0x0c, unsigned long)   /* Set IRQ rate    */

#define RTC_EPOCH_READ  _IOR('p', 0x0d, unsigned long)   /* Read epoch      */

#define RTC_EPOCH_SET   _IOW('p', 0x0e, unsigned long)   /* Set epoch       */

#endif /* _MC146818RTC_H */